[ 0.000000] Linux version 2.6.22-13-rt (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP PREEMPT RT Thu Oct 4 19:19:06 GMT 2007 (Unofficial) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f681400 (usable) [ 0.000000] BIOS-e820: 000000003f681400 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved) [ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 118MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 259713) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 259713 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 259713 [ 0.000000] On node 0 totalpages: 259713 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4040 pages, LIFO batch:0 [ 0.000000] Normal zone: 3080 pages used for memmap [ 0.000000] Normal zone: 222200 pages, LIFO batch:31 [ 0.000000] HighMem zone: 414 pages used for memmap [ 0.000000] HighMem zone: 29923 pages, LIFO batch:7 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FC070 checksum 0 [ 0.000000] ACPI: RSDP 000FC070, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT 3F68198A, 0044 (r1 DELL M07 27D60C12 ASL 61) [ 0.000000] ACPI: FACP 3F682800, 0074 (r1 DELL M07 27D60C12 ASL 61) [ 0.000000] ACPI: DSDT 3F683400, 51AC (r1 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 3F691C00, 0040 [ 0.000000] ACPI: HPET 3F682F00, 0038 (r1 DELL M07 1 ASL 61) [ 0.000000] ACPI: APIC 3F683000, 0068 (r1 DELL M07 27D60C12 ASL 47) [ 0.000000] ACPI: ASF! 3F682C00, 005B (r16 DELL M07 27D60C12 ASL 61) [ 0.000000] ACPI: MCFG 3F682FC0, 003E (r16 DELL M07 27D60C12 ASL 61) [ 0.000000] ACPI: SLIC 3F68309C, 0176 (r1 DELL M07 27D60C12 ASL 61) [ 0.000000] ACPI: TCPA 3F683300, 0032 (r1 DELL M07 27D60C12 ASL 61) [ 0.000000] ACPI: SSDT 3F681A11, 04DC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar [ 0.000000] Built 1 zonelists. Total pages: 256163 [ 0.000000] Kernel command line: root=UUID=06b4d808-19a8-44ee-9608-9479e39f6404 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] WARNING: experimental RCU implementation. [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1995.084 MHz processor. [ 31.889368] Console: colour VGA+ 80x25 [ 31.889643] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 31.889915] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 31.915641] Memory: 1011696k/1038852k available (2056k kernel code, 26368k reserved, 970k data, 364k init, 121348k highmem) [ 31.915649] virtual kernel memory layout: [ 31.915650] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 31.915651] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 31.915652] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 31.915653] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 31.915654] .init : 0xc03fb000 - 0xc0456000 ( 364 kB) [ 31.915655] .data : 0xc03022ec - 0xc03f4b44 ( 970 kB) [ 31.915656] .text : 0xc0100000 - 0xc03022ec (2056 kB) [ 31.915659] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 31.915882] hpet clockevent registered [ 31.975855] Calibrating delay using timer specific routine.. 3993.38 BogoMIPS (lpj=1996692) [ 31.975892] Security Framework v1.0.0 initialized [ 31.975896] SELinux: Disabled at boot. [ 31.975911] Mount-cache hash table entries: 512 [ 31.976036] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 31.976043] monitor/mwait feature present. [ 31.976045] using mwait in idle threads. [ 31.976049] CPU: L1 I cache: 32K, L1 D cache: 32K [ 31.976051] CPU: L2 cache: 4096K [ 31.976053] CPU: Physical Processor ID: 0 [ 31.976054] CPU: Processor Core ID: 0 [ 31.976056] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 31.976064] Compat vDSO mapped to ffffe000. [ 31.976075] Checking 'hlt' instruction... OK. [ 31.979942] SMP alternatives: switching to UP code [ 31.980242] Early unpacking initramfs... done [ 32.265119] ACPI: Core revision 20070126 [ 32.265169] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 32.267729] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 32.267746] SMP alternatives: switching to SMP code [ 32.267804] Booting processor 1/1 eip 3000 [ 34.451591] Initializing CPU#1 [ 34.511301] Calibrating delay using timer specific routine.. 3990.03 BogoMIPS (lpj=1995015) [ 34.511308] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 34.511312] monitor/mwait feature present. [ 34.511315] CPU: L1 I cache: 32K, L1 D cache: 32K [ 34.511317] CPU: L2 cache: 4096K [ 34.511319] CPU: Physical Processor ID: 0 [ 34.511320] CPU: Processor Core ID: 1 [ 34.511321] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 32.341421] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 32.341442] Total of 2 processors activated (7983.41 BogoMIPS). [ 32.341636] ENABLING IO-APIC IRQs [ 32.341842] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 32.454138] checking TSC synchronization [CPU#0 -> CPU#1]: [ 32.474137] Measured 4332845052 cycles TSC warp between CPUs, turning off TSC clock. [ 32.474139] Marking TSC unstable due to: check_tsc_sync_source failed. [ 32.474161] Brought up 2 CPUs [ 32.474329] Booting paravirtualized kernel on bare hardware [ 32.474409] Time: 3:36:40 Date: 09/07/107 [ 32.474437] NET: Registered protocol family 16 [ 32.474526] EISA bus registered [ 32.474530] ACPI: bus type pci registered [ 32.502959] PCI: PCI BIOS revision 2.10 entry at 0xfac76, last bus=12 [ 32.502961] PCI: Using configuration type 1 [ 32.502963] Setting up standard PCI resources [ 34.679233] ACPI: EC: Look up EC in DSDT [ 34.692902] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be 93 [20070126] [ 34.692908] ACPI: SSDT 3F6819CE, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) [ 34.693053] ACPI: Interpreter enabled [ 34.693056] ACPI: (supports S0 S3 S4 S5) [ 34.693074] ACPI: Using IOAPIC for interrupt routing [ 34.726229] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 34.726242] PCI: Probing PCI hardware (bus 00) [ 34.727006] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 34.727010] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 34.728009] PCI: Transparent bridge - 0000:00:1e.0 [ 34.728148] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 34.728621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 34.728785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 34.728903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 34.729017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT] [ 34.740098] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 34.740202] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11 [ 34.740304] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 [ 34.740400] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 34.740503] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 34.740607] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 34.740711] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 34.740828] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 32.570314] Linux Plug and Play Support v0.97 (c) Adam Belay [ 32.570328] pnp: PnP ACPI init [ 32.570336] ACPI: bus type pnp registered [ 32.615197] pnp: PnP ACPI: found 14 devices [ 32.615199] ACPI: ACPI bus type pnp unregistered [ 32.615202] PnPBIOS: Disabled by ACPI PNP [ 34.785914] PCI: Using ACPI for IRQ routing [ 34.785917] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 34.824751] NET: Registered protocol family 8 [ 34.824753] NET: Registered protocol family 20 [ 34.824766] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 34.824771] hpet0: 3 64-bit timers, 14318180 Hz [ 34.825834] pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved [ 34.825837] pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 34.825839] pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 34.825842] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 34.825848] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 34.825850] pnp: 00:02: ioport range 0x1000-0x1005 has been reserved [ 34.825853] pnp: 00:02: ioport range 0x1008-0x100f has been reserved [ 34.825857] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved [ 34.825860] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved [ 34.825862] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved [ 34.825865] pnp: 00:03: ioport range 0x1060-0x107f has been reserved [ 34.825867] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved [ 34.825869] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved [ 34.825876] pnp: 00:08: ioport range 0xc80-0xcaf has been reserved [ 34.825879] pnp: 00:08: ioport range 0xcc0-0xcff could not be reserved [ 34.825881] pnp: 00:08: ioport range 0x910-0x91f has been reserved [ 34.825884] pnp: 00:08: ioport range 0x920-0x92f has been reserved [ 34.825886] pnp: 00:08: ioport range 0xcbc-0xcbf has been reserved [ 34.825888] pnp: 00:08: ioport range 0x930-0x97f has been reserved [ 34.825895] pnp: 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved [ 34.825900] pnp: 00:0d: ioport range 0xcb0-0xcbb has been reserved [ 34.825903] pnp: 00:0d: iomem range 0xfed40000-0xfed44fff could not be reserved [ 34.856279] PCI: Bridge: 0000:00:1c.0 [ 34.856281] IO window: disabled. [ 34.856286] MEM window: disabled. [ 34.856291] PREFETCH window: disabled. [ 34.856297] PCI: Bridge: 0000:00:1c.1 [ 34.856298] IO window: disabled. [ 34.856304] MEM window: efd00000-efdfffff [ 34.856308] PREFETCH window: disabled. [ 34.856314] PCI: Bridge: 0000:00:1c.2 [ 34.856315] IO window: disabled. [ 34.856321] MEM window: efc00000-efcfffff [ 34.856325] PREFETCH window: disabled. [ 34.856337] PCI: Bus 4, cardbus bridge: 0000:03:01.0 [ 34.856338] IO window: 00002000-000020ff [ 34.856344] IO window: 00002400-000024ff [ 34.856349] PREFETCH window: 50000000-53ffffff [ 34.856355] MEM window: 54000000-57ffffff [ 34.856360] PCI: Bridge: 0000:00:1e.0 [ 34.856362] IO window: 2000-2fff [ 34.856368] MEM window: 54000000-59ffffff [ 34.856373] PREFETCH window: 50000000-53ffffff [ 34.856402] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 34.856408] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 34.856431] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 34.856437] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 34.856460] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 34.856466] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 34.856479] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 34.856496] PCI: Enabling device 0000:03:01.0 (0000 -> 0003) [ 34.856499] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 34.856524] NET: Registered protocol family 2 [ 32.688654] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 32.688728] TCP established hash table entries: 65536 (order: 9, 2883584 bytes) [ 34.860654] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) [ 34.861866] TCP: Hash tables configured (established 65536 bind 65536) [ 34.861870] TCP reno registered [ 32.691773] checking if image is initramfs... it is [ 33.262436] Freeing initrd memory: 7269k freed [ 35.433764] audit: initializing netlink socket (disabled) [ 35.433778] audit(1191728200.110:1): initialized [ 33.263239] highmem bounce pool size: 64 pages [ 33.263398] VFS: Disk quotas dquot_6.5.1 [ 33.263406] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 33.263461] io scheduler noop registered [ 33.263463] io scheduler anticipatory registered [ 33.263465] io scheduler deadline registered [ 33.263473] io scheduler cfq registered (default) [ 33.263496] Boot video device is 0000:00:02.0 [ 33.263683] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 33.263741] assign_interrupt_mode Found MSI capability [ 33.263743] Allocate Port Service[0000:00:1c.0:pcie00] [ 33.263781] Allocate Port Service[0000:00:1c.0:pcie02] [ 33.263886] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 33.263943] assign_interrupt_mode Found MSI capability [ 33.263946] Allocate Port Service[0000:00:1c.1:pcie00] [ 33.263981] Allocate Port Service[0000:00:1c.1:pcie02] [ 33.264089] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 33.264146] assign_interrupt_mode Found MSI capability [ 33.264148] Allocate Port Service[0000:00:1c.2:pcie00] [ 33.264182] Allocate Port Service[0000:00:1c.2:pcie02] [ 33.264440] isapnp: Scanning for PnP cards... [ 33.621200] isapnp: No Plug & Play device found [ 33.644132] Real Time Clock Driver v1.12ac [ 33.644320] hpet_resources: 0xfed00000 is busy [ 33.644381] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 33.644508] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 33.645137] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 35.816486] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 35.816616] input: Macintosh mouse button emulation as /class/input/input0 [ 35.816704] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 35.819763] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 35.819768] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 33.649255] mice: PS/2 mouse device common for all mice [ 35.820025] EISA: Probing bus 0 at eisa.0 [ 35.820028] EISA: Cannot allocate resource for mainboard [ 35.820031] Cannot allocate resource for EISA slot 1 [ 35.820033] Cannot allocate resource for EISA slot 2 [ 35.820059] EISA: Detected 0 cards. [ 35.820119] TCP cubic registered [ 35.820125] NET: Registered protocol family 1 [ 35.820140] Using IPI No-Shortcut mode [ 33.649646] Magic number: 11:445:613 [ 33.649649] hash matches device isa [ 33.649669] hash matches device ptye3 [ 33.649918] Freeing unused kernel memory: 364k freed [ 33.652057] input: AT Translated Set 2 keyboard as /class/input/input1 [ 34.859491] AppArmor: AppArmor initialized<5>audit(1191728201.610:2): type=1505 info="AppArmor initialized" pid=1234 [ 37.037639] fuse init (API version 7.8) [ 37.042906] Failure registering capabilities with primary security module. [ 37.052126] ACPI: SSDT 3F682138, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 37.052314] ACPI: SSDT 3F681EED, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 37.052551] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 37.052555] ACPI: Processor [CPU0] (supports 8 throttling states) [ 37.052775] ACPI: SSDT 3F68237C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 37.052943] ACPI: SSDT 3F6820B3, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 37.053185] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 37.053190] ACPI: Processor [CPU1] (supports 8 throttling states) [ 37.056885] ACPI: Thermal Zone [THM] (55 C) [ 41.701116] usbcore: registered new interface driver usbfs [ 41.701140] usbcore: registered new interface driver hub [ 41.701167] usbcore: registered new device driver usb [ 39.537393] SCSI subsystem initialized [ 41.716494] USB Universal Host Controller Interface driver v3.0 [ 41.716596] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 41.716614] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 41.716618] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 39.546343] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 39.546504] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000bf80 [ 39.546960] usb usb1: configuration #1 chosen from 1 choice [ 39.546987] hub 1-0:1.0: USB hub found [ 39.546993] hub 1-0:1.0: 2 ports detected [ 41.740632] libata version 2.21 loaded. [ 41.818510] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 41.818521] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 41.818524] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 41.818551] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 41.818603] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bf60 [ 41.818716] usb usb2: configuration #1 chosen from 1 choice [ 41.818742] hub 2-0:1.0: USB hub found [ 41.818747] hub 2-0:1.0: 2 ports detected [ 39.748765] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 39.748773] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 39.748777] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 39.748796] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 41.919498] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bf40 [ 41.919595] usb usb3: configuration #1 chosen from 1 choice [ 41.919619] hub 3-0:1.0: USB hub found [ 41.919625] hub 3-0:1.0: 2 ports detected [ 39.849786] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22 [ 39.849794] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 39.849798] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 39.849818] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 42.020522] uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000bf20 [ 42.020617] usb usb4: configuration #1 chosen from 1 choice [ 42.020642] hub 4-0:1.0: USB hub found [ 42.020648] hub 4-0:1.0: 2 ports detected [ 42.024298] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 39.950713] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 [ 39.950724] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 39.950727] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 39.950747] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 39.950779] ehci_hcd 0000:00:1d.7: debug port 1 [ 39.950785] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 39.950789] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80000 [ 39.954688] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 39.954760] usb usb5: configuration #1 chosen from 1 choice [ 39.954788] hub 5-0:1.0: USB hub found [ 39.954794] hub 5-0:1.0: 8 ports detected [ 40.056267] tg3.c:v3.77 (May 31, 2007) [ 40.056289] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 40.056298] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 42.235312] eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:18:8b:b6:90:a3 [ 42.235319] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 42.235322] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 42.235337] ata_piix 0000:00:1f.2: version 2.11 [ 42.235342] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 42.235366] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 42.235397] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 42.236836] scsi0 : ata_piix [ 40.066997] scsi1 : ata_piix [ 40.076059] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14 [ 40.076062] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15 [ 42.400690] ata1.00: ATA-7: Hitachi HTS721060G9SA00, MC3OC10H, max UDMA/100 [ 42.400693] ata1.00: 117210240 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 42.406680] ata1.00: configured for UDMA/100 [ 40.367428] usb 1-2: device not accepting address 2, error -71 [ 42.569145] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72106 MC3O PQ: 0 ANSI: 5 [ 42.574490] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 42.574504] sd 0:0:0:0: [sda] Write Protect is off [ 42.574506] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 42.574523] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 40.404115] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 40.404126] sd 0:0:0:0: [sda] Write Protect is off [ 40.404129] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 40.404145] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 40.404149] sda: sda1 sda2 < sda5 > [ 42.615207] sd 0:0:0:0: [sda] Attached SCSI disk [ 42.618535] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 40.644965] Attempting manual resume [ 40.644968] swsusp: Resume From Partition 8:5 [ 40.644970] PM: Checking swsusp image. [ 42.815845] PM: Resume from disk failed. [ 42.821718] swsusp: Basic memory bitmaps created [ 42.825861] swsusp: Basic memory bitmaps freed [ 42.857718] kjournald starting. Commit interval 5 seconds [ 40.687075] EXT3-fs: mounted filesystem with ordered data mode. [ 40.853238] usb 1-2: new full speed USB device using uhci_hcd and address 4 [ 43.165631] usb 1-2: configuration #1 chosen from 1 choice [ 43.168573] hub 1-2:1.0: USB hub found [ 43.171550] hub 1-2:1.0: 4 ports detected [ 43.468388] usb 1-2.3: new full speed USB device using uhci_hcd and address 5 [ 43.582385] usb 1-2.3: configuration #1 chosen from 1 choice [ 43.585342] hub 1-2.3:1.0: USB hub found [ 43.588315] hub 1-2.3:1.0: 3 ports detected [ 43.882159] usb 1-2.4: new full speed USB device using uhci_hcd and address 6 [ 44.037149] usb 1-2.4: configuration #1 chosen from 1 choice [ 44.218973] usb 1-2.3.1: new full speed USB device using uhci_hcd and address 7 [ 44.345966] usb 1-2.3.1: configuration #1 chosen from 1 choice [ 44.525804] usb 1-2.3.2: new full speed USB device using uhci_hcd and address 8 [ 44.637803] usb 1-2.3.2: configuration #1 chosen from 1 choice [ 52.051807] Linux agpgart interface v0.102 (c) Dave Jones [ 52.064905] agpgart: Detected an Intel 945GM Chipset. [ 52.079566] agpgart: Detected 7932K stolen memory. [ 52.102310] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 54.378460] input: PC Speaker as /class/input/input2 [ 52.300558] agpgart: AGP aperture is 256M @ 0xd0000000 [ 52.300599] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 54.588388] iTCO_vendor_support: vendor-support=0 [ 54.592523] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 52.607500] ieee80211_crypt: registered algorithm 'NULL' [ 52.610119] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 52.610122] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 52.667734] Bluetooth: Core ver 2.11 [ 52.667894] NET: Registered protocol family 31 [ 52.667896] Bluetooth: HCI device and connection manager initialized [ 52.667899] Bluetooth: HCI socket layer initialized [ 52.747485] Bluetooth: HCI USB driver ver 2.9 [ 52.750852] usbcore: registered new interface driver hci_usb [ 54.945787] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1 [ 54.945790] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 52.775689] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 52.775705] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 52.775788] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 52.829671] Yenta: CardBus bridge found at 0000:03:01.0 [1028:01c2] [ 52.829698] Yenta O2: res at 0x94/0xD4: 00/ea [ 52.829700] Yenta O2: enabling read prefetch/write burst [ 55.049500] input: PS/2 Mouse as /class/input/input3 [ 55.069345] input: AlpsPS/2 ALPS GlidePoint as /class/input/input4 [ 55.073396] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 55.073717] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 52.915075] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 52.915092] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 52.953413] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18 [ 52.953417] Socket status: 30000006 [ 52.953420] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 52.953426] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 52.953428] cs: IO port probe 0x2000-0x2fff: clean. [ 52.953710] pcmcia: parent PCI bridge Memory window: 0x54000000 - 0x59ffffff [ 52.953712] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 52.961892] intel_rng: FWH not detected [ 55.456804] cs: IO port probe 0x100-0x3af: clean. [ 55.458788] cs: IO port probe 0x3e0-0x4ff: clean. [ 55.459600] cs: IO port probe 0x820-0x8ff: clean. [ 55.460292] cs: IO port probe 0xc00-0xcf7: clean. [ 55.460923] cs: IO port probe 0xa00-0xaff: clean. [ 55.636840] lp: driver loaded but no devices found [ 55.721909] Adding 2409708k swap on /dev/sda5. Priority:-1 extents:1 across:2409708k [ 56.055501] EXT3 FS on sda1, internal journal [ 54.621942] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) [ 57.535490] ACPI: AC Adapter [AC] (on-line) [ 57.595083] ACPI: Battery Slot [BAT0] (battery present) [ 57.615249] ACPI: Battery Slot [BAT1] (battery present) [ 57.628088] ACPI: ACPI Dock Station Driver [ 55.459717] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay [ 55.459722] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler [ 55.459743] ACPI: Error installing bay notify handler [ 55.459747] ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added [ 55.472258] input: Lid Switch as /class/input/input5 [ 55.472281] ACPI: Lid Switch [LID] [ 55.472317] input: Power Button (CM) as /class/input/input6 [ 55.472338] ACPI: Power Button (CM) [PBTN] [ 55.472386] input: Sleep Button (CM) as /class/input/input7 [ 55.472400] ACPI: Sleep Button (CM) [SBTN] [ 57.731803] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 57.732177] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 57.732240] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 57.142807] PM: Writing back config space on device 0000:09:00.0 at offset c (was 7ebd0000, writing 0) [ 58.849824] ppdev: user-space parallel port driver [ 61.387655] [drm] Initialized drm 1.1.0 20060810 [ 61.425791] audit(1191728226.779:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5160 profile="/usr/sbin/cupsd" [ 61.448214] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 61.448265] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 61.873285] apm: BIOS not found. [ 64.141693] NET: Registered protocol family 17 [ 61.980863] device eth0 entered promiscuous mode [ 61.980873] audit(1191728229.278:4): dev=eth0 prom=256 old_prom=0 auid=4294967295 [ 64.356974] Failure registering capabilities with primary security module. [ 64.585115] Bluetooth: L2CAP ver 2.8 [ 64.585119] Bluetooth: L2CAP socket layer initialized [ 62.556695] Bluetooth: RFCOMM socket layer initialized [ 62.556713] Bluetooth: RFCOMM TTY layer initialized [ 62.556716] Bluetooth: RFCOMM ver 1.8 [ 65.502017] NET: Registered protocol family 10 [ 65.502134] lo: Disabled Privacy Extensions [ 65.502212] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 65.502238] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 131.449207] ieee80211_crypt: registered algorithm 'WEP' [ 129.370316] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 145.832809] eth1: no IPv6 routers present