[ 12.393775] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 12.393875] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 12.557362] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 12.563957] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 12.677707] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.677909] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.734861] Adding 8191996k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:8191996k [ 12.909832] init: plymouth-stop pre-start process (1506) terminated with status 1 [ 17.599742] PM: Syncing filesystems ... done. [ 17.600520] PM: Preparing system for mem sleep [ 17.664464] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 17.680374] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 17.696355] PM: Entering mem sleep [ 17.696656] Suspending console(s) (use no_console_suspend to debug) [ 19.175064] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 19.175072] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 19.175205] sd 0:0:0:0: [sda] Stopping disk [ 19.175206] sd 1:0:0:0: [sdb] Stopping disk [ 19.410231] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 223.630 msecs [ 19.771620] PM: suspend of drv:sd dev:0:0:0:0 complete after 597.273 msecs [ 19.771656] PM: suspend of drv:scsi dev:target0:0:0 complete after 597.306 msecs [ 19.771687] PM: suspend of drv:scsi dev:host0 complete after 585.667 msecs [ 19.785810] PM: suspend of drv: dev:ata1 complete after 599.730 msecs [ 19.801761] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 615.683 msecs [ 19.801797] PM: suspend of drv: dev:pci0000:00 complete after 614.406 msecs [ 19.801807] PM: suspend of devices complete after 2107.561 msecs [ 19.801810] PM: suspend devices took 2.108 seconds [ 19.801940] PM: late suspend of devices complete after 0.128 msecs [ 19.817912] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 19.833779] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 19.865730] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI [ 19.881740] PM: noirq suspend of devices complete after 79.891 msecs [ 19.881945] ACPI: Preparing to enter system sleep state S3 [ 20.049764] PM: Saving platform NVS memory [ 20.108577] Disabling non-boot CPUs ... [ 20.110191] CPU 1 is now offline [ 20.213266] CPU 2 is now offline [ 20.317137] CPU 3 is now offline [ 20.317434] Extended CMOS year: 2000 [ 20.318778] ACPI: Low-level resume complete [ 20.318831] PM: Restoring platform NVS memory [ 20.320931] Extended CMOS year: 2000 [ 20.321041] Enabling non-boot CPUs ... [ 20.321143] Booting Node 0 Processor 1 APIC 0x2 [ 20.335388] CPU1 is up [ 20.335504] Booting Node 0 Processor 2 APIC 0x1 [ 20.349714] CPU2 is up [ 20.349798] Booting Node 0 Processor 3 APIC 0x3 [ 20.364005] CPU3 is up [ 20.372169] ACPI: Waking up from system sleep state S3 [ 20.445657] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI [ 20.445760] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 20.446016] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 20.446580] PM: noirq resume of devices complete after 1.123 msecs [ 20.446664] PM: early resume of devices complete after 0.058 msecs [ 20.446776] i915 0000:00:02.0: setting latency timer to 64 [ 20.446782] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 20.446790] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 20.446875] mei 0000:00:16.0: irq 46 for MSI/MSI-X [ 20.446879] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 20.446909] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 20.446935] ahci 0000:00:1f.2: setting latency timer to 64 [ 20.447916] mei 0000:00:16.0: wd: failed to find the client [ 20.494083] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 20.624295] PM: resume of drv:hub dev:2-1:1.0 complete after 176.868 msecs [ 20.624300] PM: resume of drv:usb dev:2-1.5 complete after 176.483 msecs [ 20.624304] PM: resume of drv: dev:ep_81 complete after 176.862 msecs [ 20.624321] PM: resume of drv: dev:ep_00 complete after 176.951 msecs [ 20.624324] PM: resume of drv:hub dev:1-1:1.0 complete after 177.075 msecs [ 20.624332] PM: resume of drv:usb dev:1-1.4 complete after 176.719 msecs [ 20.624337] PM: resume of drv: dev:ep_00 complete after 176.827 msecs [ 20.624340] PM: resume of drv: dev:ep_81 complete after 177.067 msecs [ 20.696421] usb 2-1.5: reset high-speed USB device number 3 using ehci_hcd [ 20.772099] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 20.773925] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 20.774270] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 20.774273] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 20.775332] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 20.775404] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 20.775417] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 20.775587] ata2.00: configured for UDMA/133 [ 20.788118] PM: resume of drv:scsi dev:host1 complete after 341.481 msecs [ 20.788141] PM: resume of drv:scsi_host dev:host1 complete after 341.500 msecs [ 20.788145] PM: resume of drv:scsi dev:target1:0:0 complete after 341.171 msecs [ 20.788171] PM: resume of drv:sd dev:1:0:0:0 complete after 341.182 msecs [ 20.788179] sd 1:0:0:0: [sdb] Starting disk [ 20.788278] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 341.265 msecs [ 20.860190] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd [ 20.884859] PM: resume of drv: dev:ep_00 complete after 437.275 msecs [ 20.884864] PM: resume of drv:uvcvideo dev:2-1.5:1.0 complete after 437.339 msecs [ 20.884868] PM: resume of drv:uvcvideo dev:2-1.5:1.1 complete after 437.296 msecs [ 20.884880] PM: resume of drv: dev:ep_83 complete after 437.339 msecs [ 20.956426] PM: resume of drv: dev:ep_00 complete after 509.030 msecs [ 20.956429] PM: resume of drv:rts5139 dev:1-1.4:1.0 complete after 509.156 msecs [ 20.956447] PM: resume of drv: dev:ep_01 complete after 509.115 msecs [ 20.956449] PM: resume of drv: dev:ep_82 complete after 509.094 msecs [ 20.956452] PM: resume of drv:scsi dev:host6 complete after 508.934 msecs [ 20.956456] PM: resume of drv: dev:ep_83 complete after 509.084 msecs [ 20.956461] PM: resume of drv:scsi_host dev:host6 complete after 508.925 msecs [ 20.956464] PM: resume of drv:scsi dev:target6:0:0 complete after 508.906 msecs [ 20.956473] PM: resume of drv:sd dev:6:0:0:0 complete after 508.896 msecs [ 20.956486] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 508.889 msecs [ 22.841634] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 22.842531] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 22.842777] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 22.842782] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 22.844893] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 22.845050] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 22.845055] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 22.846050] ata1.00: configured for UDMA/133 [ 22.861660] PM: resume of drv:scsi dev:host0 complete after 2417.518 msecs [ 22.861665] PM: resume of drv:ata_port dev:ata1 complete after 2378.160 msecs [ 22.861677] PM: resume of drv:scsi_host dev:host0 complete after 2417.529 msecs [ 22.861684] PM: resume of drv:scsi dev:target0:0:0 complete after 2417.262 msecs [ 22.861693] PM: resume of drv:sd dev:0:0:0:0 complete after 2417.249 msecs [ 22.861699] sd 0:0:0:0: [sda] Starting disk [ 22.863248] Extended CMOS year: 2000 [ 22.882332] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2437.888 msecs [ 22.882465] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 22.889050] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 23.000026] PM: resume of devices complete after 2556.415 msecs [ 23.000100] PM: resume devices took 2.556 seconds [ 23.000145] PM: Finishing wakeup. [ 23.002432] wlan0: authenticate with 74:ea:3a:e4:cc:de [ 23.000145] Restarting tasks ... done. [ 23.005714] wlan0: send auth to 74:ea:3a:e4:cc:de (try 1/3) [ 23.009260] wlan0: authenticated [ 23.013374] wlan0: associate with 74:ea:3a:e4:cc:de (try 1/3) [ 23.016893] wlan0: RX AssocResp from 74:ea:3a:e4:cc:de (capab=0x411 status=0 aid=1) [ 23.019167] wlan0: associated [ 23.019520] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 23.019605] cfg80211: Calling CRDA for country: NL [ 23.022907] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 23.022910] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022911] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 23.022913] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022914] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 23.022915] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022916] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 23.022917] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022918] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 23.022919] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022920] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 23.022921] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022922] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 23.022923] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022924] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 23.022925] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022926] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 23.022928] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022928] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 23.022930] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022931] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 23.022932] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022933] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 23.022934] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022935] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 23.022936] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022937] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [ 23.022938] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022939] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [ 23.022940] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022941] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [ 23.022942] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022943] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [ 23.022944] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022945] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [ 23.022947] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022948] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [ 23.022949] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022950] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [ 23.022951] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022952] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [ 23.022953] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.022954] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [ 23.022955] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 23.022956] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [ 23.022957] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 23.022958] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [ 23.022959] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 23.022960] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [ 23.022961] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 23.022962] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [ 23.022964] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 23.022965] cfg80211: Updating information on frequency 5600 MHz for a 20 MHz width channel with regulatory rule: [ 23.022966] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 23.022967] cfg80211: Updating information on frequency 5620 MHz for a 20 MHz width channel with regulatory rule: [ 23.022968] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 23.022969] cfg80211: Updating information on frequency 5640 MHz for a 20 MHz width channel with regulatory rule: [ 23.022970] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 23.022971] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [ 23.022972] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 23.022973] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [ 23.022974] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 23.022975] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [ 23.022976] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 23.022977] cfg80211: Disabling freq 5745 MHz [ 23.022978] cfg80211: Disabling freq 5765 MHz [ 23.022979] cfg80211: Disabling freq 5785 MHz [ 23.022980] cfg80211: Disabling freq 5805 MHz [ 23.022980] cfg80211: Disabling freq 5825 MHz [ 23.022983] cfg80211: Regulatory domain changed to country: NL [ 23.022984] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 23.022985] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 23.022986] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 23.022987] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 23.022988] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 23.025807] video LNXVIDEO:00: Restoring backlight state [ 23.026151] video LNXVIDEO:01: Restoring backlight state [ 23.073327] usb 2-1.6: new full-speed USB device number 5 using ehci_hcd [ 23.169227] usb 2-1.6: New USB device found, idVendor=8087, idProduct=07da [ 23.169230] usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 30.865135] CPU2: Package power limit notification (total events = 1) [ 30.865137] CPU1: Package power limit notification (total events = 1) [ 30.865138] CPU3: Package power limit notification (total events = 1) [ 30.865140] CPU0: Package power limit notification (total events = 1) [ 30.876146] CPU1: Package power limit normal [ 30.876148] CPU0: Package power limit normal [ 30.876149] CPU3: Package power limit normal [ 30.876150] CPU2: Package power limit normal [ 335.345865] CPU0: Package power limit notification (total events = 1156) [ 335.345868] CPU2: Package power limit notification (total events = 1156) [ 335.345910] CPU1: Package power limit notification (total events = 1156) [ 335.345913] CPU3: Package power limit notification (total events = 1155) [ 335.347211] CPU0: Package power limit normal [ 335.347215] CPU2: Package power limit normal [ 335.347218] CPU3: Package power limit normal [ 335.347220] CPU1: Package power limit normal [ 374.874197] wlan0: deauthenticating from 74:ea:3a:e4:cc:de by local choice (reason=3) [ 374.902346] cfg80211: All devices are disconnected, going to restore regulatory settings [ 374.902355] cfg80211: Restoring regulatory settings [ 374.902361] cfg80211: Calling CRDA to update world regulatory domain [ 374.907412] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 374.907420] cfg80211: World regulatory domain updated: [ 374.907423] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 374.907428] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 374.907432] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 374.907435] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 374.907439] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 374.907442] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 376.298608] PM: Syncing filesystems ... done. [ 376.300577] PM: Preparing system for mem sleep [ 376.323546] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 376.339461] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 376.355436] PM: Entering mem sleep [ 376.355799] Suspending console(s) (use no_console_suspend to debug) [ 376.356088] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 376.356125] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 376.356160] sd 1:0:0:0: [sdb] Stopping disk [ 376.356335] sd 0:0:0:0: [sda] Stopping disk [ 376.590952] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 223.090 msecs [ 377.027705] PM: suspend of drv:sd dev:0:0:0:0 complete after 672.720 msecs [ 377.027726] PM: suspend of drv:scsi dev:target0:0:0 complete after 672.712 msecs [ 377.027737] PM: suspend of drv:scsi dev:host0 complete after 660.714 msecs [ 377.042185] PM: suspend of drv: dev:ata1 complete after 675.130 msecs [ 377.058162] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 691.116 msecs [ 377.058183] PM: suspend of drv: dev:pci0000:00 complete after 690.990 msecs [ 377.058201] PM: suspend of devices complete after 703.482 msecs [ 377.058203] PM: suspend devices took 0.704 seconds [ 377.058340] PM: late suspend of devices complete after 0.134 msecs [ 377.074300] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 377.090293] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 377.122096] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI [ 377.138116] PM: noirq suspend of devices complete after 79.907 msecs [ 377.138321] ACPI: Preparing to enter system sleep state S3 [ 377.290087] PM: Saving platform NVS memory [ 377.350173] Disabling non-boot CPUs ... [ 377.453491] CPU 1 is now offline [ 377.557301] CPU 2 is now offline [ 377.557856] Broke affinity for irq 43 [ 377.557858] Broke affinity for irq 44 [ 377.661111] CPU 3 is now offline [ 377.661904] Extended CMOS year: 2000 [ 377.663729] ACPI: Low-level resume complete [ 377.663784] PM: Restoring platform NVS memory [ 377.665881] Extended CMOS year: 2000 [ 377.665934] Enabling non-boot CPUs ... [ 377.666049] Booting Node 0 Processor 1 APIC 0x2 [ 377.680274] CPU1 is up [ 377.680381] Booting Node 0 Processor 2 APIC 0x1 [ 377.694647] CPU2 is up [ 377.694809] Booting Node 0 Processor 3 APIC 0x3 [ 377.708882] CPU3 is up [ 377.717448] ACPI: Waking up from system sleep state S3 [ 378.197226] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI [ 378.197319] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 378.197562] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 378.198092] PM: noirq resume of devices complete after 1.049 msecs [ 378.198183] PM: early resume of devices complete after 0.064 msecs [ 378.198244] i915 0000:00:02.0: setting latency timer to 64 [ 378.198285] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 378.198311] mei 0000:00:16.0: irq 46 for MSI/MSI-X [ 378.198354] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 378.198403] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 378.198441] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 378.198456] ahci 0000:00:1f.2: setting latency timer to 64 [ 378.199186] mei 0000:00:16.0: wd: failed to find the client [ 378.249726] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 378.375928] PM: resume of drv:hub dev:1-1:1.0 complete after 176.973 msecs [ 378.375933] PM: resume of drv:hub dev:2-1:1.0 complete after 176.801 msecs [ 378.375936] PM: resume of drv: dev:ep_00 complete after 176.741 msecs [ 378.375943] PM: resume of drv: dev:ep_00 complete after 176.907 msecs [ 378.375947] PM: resume of drv:usb dev:1-1.4 complete after 176.721 msecs [ 378.375950] PM: resume of drv:usb dev:2-1.5 complete after 176.507 msecs [ 378.375952] PM: resume of drv:usb dev:2-1.6 complete after 176.123 msecs [ 378.375973] PM: resume of drv: dev:ep_81 complete after 176.824 msecs [ 378.375976] PM: resume of drv: dev:ep_81 complete after 176.981 msecs [ 378.447934] usb 2-1.5: reset high-speed USB device number 3 using ehci_hcd [ 378.523650] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 378.525471] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 378.525799] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 378.525801] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 378.526849] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 378.526920] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 378.526935] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 378.527108] ata2.00: configured for UDMA/133 [ 378.555611] PM: resume of drv:scsi dev:host1 complete after 357.636 msecs [ 378.555628] PM: resume of drv:scsi dev:target1:0:0 complete after 357.201 msecs [ 378.555633] PM: resume of drv:scsi_host dev:host1 complete after 357.656 msecs [ 378.555643] PM: resume of drv:sd dev:1:0:0:0 complete after 357.147 msecs [ 378.555652] sd 1:0:0:0: [sdb] Starting disk [ 378.555791] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 357.221 msecs [ 378.611743] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd [ 378.636118] PM: resume of drv:uvcvideo dev:2-1.5:1.0 complete after 437.085 msecs [ 378.636128] PM: resume of drv: dev:ep_83 complete after 437.070 msecs [ 378.636144] PM: resume of drv:uvcvideo dev:2-1.5:1.1 complete after 437.043 msecs [ 378.636146] PM: resume of drv: dev:ep_00 complete after 437.012 msecs [ 378.707961] PM: resume of drv:rts5139 dev:1-1.4:1.0 complete after 509.271 msecs [ 378.707974] PM: resume of drv: dev:ep_82 complete after 509.197 msecs [ 378.707977] PM: resume of drv: dev:ep_83 complete after 509.168 msecs [ 378.707985] PM: resume of drv:scsi dev:host6 complete after 508.917 msecs [ 378.707989] PM: resume of drv: dev:ep_01 complete after 509.272 msecs [ 378.707992] PM: resume of drv: dev:ep_00 complete after 509.153 msecs [ 378.707994] PM: resume of drv:scsi_host dev:host6 complete after 508.896 msecs [ 378.708001] PM: resume of drv:scsi dev:target6:0:0 complete after 508.881 msecs [ 378.708014] PM: resume of drv:sd dev:6:0:0:0 complete after 508.851 msecs [ 378.708034] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 508.840 msecs [ 378.775406] usb 2-1.6: reset full-speed USB device number 5 using ehci_hcd [ 378.870201] btusb 2-1.6:1.0: no reset_resume for driver btusb? [ 378.870203] btusb 2-1.6:1.1: no reset_resume for driver btusb? [ 378.870358] PM: resume of drv:usb dev:2-1.6:1.0 complete after 671.315 msecs [ 378.870362] PM: resume of drv: dev:ep_00 complete after 671.083 msecs [ 378.870376] PM: resume of drv: dev:ep_81 complete after 671.291 msecs [ 378.870379] PM: resume of drv: dev:ep_02 complete after 671.256 msecs [ 378.870382] PM: resume of drv:usb dev:2-1.6:1.1 complete after 671.150 msecs [ 378.870384] PM: resume of drv: dev:ep_82 complete after 671.200 msecs [ 378.870394] PM: resume of drv: dev:ep_03 complete after 671.147 msecs [ 378.870397] PM: resume of drv: dev:ep_83 complete after 671.133 msecs [ 380.136945] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 380.137855] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 380.138091] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 380.138097] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 380.140180] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 380.140361] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 380.140365] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 380.141366] ata1.00: configured for UDMA/133 [ 380.156938] PM: resume of drv:scsi dev:host0 complete after 1961.690 msecs [ 380.156953] PM: resume of drv:ata_port dev:ata1 complete after 1911.790 msecs [ 380.156957] PM: resume of drv:scsi dev:target0:0:0 complete after 1961.479 msecs [ 380.156960] PM: resume of drv:scsi_host dev:host0 complete after 1961.709 msecs [ 380.156968] PM: resume of drv:sd dev:0:0:0:0 complete after 1961.417 msecs [ 380.156973] sd 0:0:0:0: [sda] Starting disk [ 380.178650] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1983.052 msecs [ 380.203657] PM: resume of devices complete after 2008.874 msecs [ 380.272952] PM: resume devices took 2.080 seconds [ 380.273007] PM: Finishing wakeup. [ 380.273008] Restarting tasks ... done. [ 380.284750] video LNXVIDEO:00: Restoring backlight state [ 380.285076] video LNXVIDEO:01: Restoring backlight state [ 380.581261] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 380.587832] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 380.703852] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 402.932100] wlan0: authenticate with 1e:b0:94:d3:60:7a [ 402.937635] wlan0: send auth to 1e:b0:94:d3:60:7a (try 1/3) [ 403.137843] wlan0: send auth to 1e:b0:94:d3:60:7a (try 2/3) [ 403.341521] wlan0: send auth to 1e:b0:94:d3:60:7a (try 3/3) [ 403.431967] wlan0: authenticated [ 403.433356] wlan0: associate with 1e:b0:94:d3:60:7a (try 1/3) [ 403.446156] wlan0: RX AssocResp from 1e:b0:94:d3:60:7a (capab=0x431 status=0 aid=1) [ 403.464776] wlan0: associated [ 403.465915] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 413.543062] wlan0: disassociating from 1e:b0:94:d3:60:7a by local choice (reason=3) [ 413.575072] cfg80211: All devices are disconnected, going to restore regulatory settings [ 413.575081] cfg80211: Restoring regulatory settings [ 413.575088] cfg80211: Calling CRDA to update world regulatory domain [ 413.575683] wlan0: deauthenticating from 1e:b0:94:d3:60:7a by local choice (reason=3) [ 413.582709] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 413.582716] cfg80211: World regulatory domain updated: [ 413.582718] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 413.582723] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 413.582727] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 413.582730] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 413.582733] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 413.582737] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 417.756360] wlan0: authenticate with 1e:b0:94:d3:60:7a [ 417.758983] wlan0: send auth to 1e:b0:94:d3:60:7a (try 1/3) [ 417.960687] wlan0: send auth to 1e:b0:94:d3:60:7a (try 2/3) [ 418.164354] wlan0: send auth to 1e:b0:94:d3:60:7a (try 3/3) [ 418.217138] wlan0: authenticated [ 418.220267] wlan0: associate with 1e:b0:94:d3:60:7a (try 1/3) [ 418.226705] wlan0: RX AssocResp from 1e:b0:94:d3:60:7a (capab=0x431 status=0 aid=1) [ 418.228951] wlan0: associated [ 425.416299] wlan0: deauthenticating from 1e:b0:94:d3:60:7a by local choice (reason=3) [ 425.462307] cfg80211: All devices are disconnected, going to restore regulatory settings [ 425.462312] cfg80211: Restoring regulatory settings [ 425.462315] cfg80211: Calling CRDA to update world regulatory domain [ 425.465854] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 425.465857] cfg80211: World regulatory domain updated: [ 425.465858] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 425.465860] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 425.465861] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 425.465862] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 425.465863] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 425.465865] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 436.489504] wlan0: authenticate with 1e:b0:94:d3:60:7a [ 436.490749] wlan0: send auth to 1e:b0:94:d3:60:7a (try 1/3) [ 436.692895] wlan0: send auth to 1e:b0:94:d3:60:7a (try 2/3) [ 436.896549] wlan0: send auth to 1e:b0:94:d3:60:7a (try 3/3) [ 436.954830] wlan0: authenticated [ 436.956422] wlan0: associate with 1e:b0:94:d3:60:7a (try 1/3) [ 436.966381] wlan0: RX AssocResp from 1e:b0:94:d3:60:7a (capab=0x431 status=0 aid=1) [ 436.968833] wlan0: associated [ 446.990068] wlan0: disassociating from 1e:b0:94:d3:60:7a by local choice (reason=3) [ 446.997056] cfg80211: All devices are disconnected, going to restore regulatory settings [ 446.997084] cfg80211: Restoring regulatory settings [ 446.997106] cfg80211: Calling CRDA to update world regulatory domain [ 446.999456] wlan0: deauthenticating from 1e:b0:94:d3:60:7a by local choice (reason=3) [ 447.007647] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 447.007654] cfg80211: World regulatory domain updated: [ 447.007657] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 447.007662] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 447.007666] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 447.007669] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 447.007672] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 447.007676] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 451.180098] wlan0: authenticate with 1e:b0:94:d3:60:7a [ 451.182658] wlan0: send auth to 1e:b0:94:d3:60:7a (try 1/3) [ 451.383910] wlan0: send auth to 1e:b0:94:d3:60:7a (try 2/3) [ 451.587611] wlan0: send auth to 1e:b0:94:d3:60:7a (try 3/3) [ 451.657326] wlan0: authenticated [ 451.659475] wlan0: associate with 1e:b0:94:d3:60:7a (try 1/3) [ 451.668948] wlan0: RX AssocResp from 1e:b0:94:d3:60:7a (capab=0x431 status=0 aid=1) [ 451.671345] wlan0: associated [ 458.360519] wlan0: deauthenticating from 1e:b0:94:d3:60:7a by local choice (reason=3) [ 458.402892] cfg80211: All devices are disconnected, going to restore regulatory settings [ 458.402896] cfg80211: Restoring regulatory settings [ 458.402900] cfg80211: Calling CRDA to update world regulatory domain [ 458.405876] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 458.405879] cfg80211: World regulatory domain updated: [ 458.405880] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 458.405881] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 458.405882] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 458.405884] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 458.405885] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 458.405886] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 488.137155] wlan0: authenticate with 1e:b0:94:d3:60:7a [ 488.139549] wlan0: send auth to 1e:b0:94:d3:60:7a (try 1/3) [ 488.341196] wlan0: send auth to 1e:b0:94:d3:60:7a (try 2/3) [ 488.544837] wlan0: send auth to 1e:b0:94:d3:60:7a (try 3/3) [ 488.608856] wlan0: authenticated [ 488.612778] wlan0: associate with 1e:b0:94:d3:60:7a (try 1/3) [ 488.667461] wlan0: RX AssocResp from 1e:b0:94:d3:60:7a (capab=0x431 status=0 aid=1) [ 488.669900] wlan0: associated [ 642.065969] CPU1: Package power limit notification (total events = 1919) [ 642.065971] CPU3: Package power limit notification (total events = 1915) [ 642.065975] CPU0: Package power limit notification (total events = 1918) [ 642.065978] CPU2: Package power limit notification (total events = 1919) [ 642.076923] CPU1: Package power limit normal [ 642.076925] CPU3: Package power limit normal [ 642.076945] CPU0: Package power limit normal [ 642.076946] CPU2: Package power limit normal [ 944.054991] CPU3: Package power limit notification (total events = 2551) [ 944.054995] CPU0: Package power limit notification (total events = 2557) [ 944.054997] CPU1: Package power limit notification (total events = 2555) [ 944.055000] CPU2: Package power limit notification (total events = 2558) [ 944.068020] CPU1: Package power limit normal [ 944.068023] CPU0: Package power limit normal [ 944.068025] CPU3: Package power limit normal [ 944.068027] CPU2: Package power limit normal [ 1189.946029] wlan0: deauthenticating from 1e:b0:94:d3:60:7a by local choice (reason=3) [ 1189.995471] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1189.995488] cfg80211: Restoring regulatory settings [ 1189.995507] cfg80211: Calling CRDA to update world regulatory domain [ 1190.005184] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1190.005188] cfg80211: World regulatory domain updated: [ 1190.005189] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1190.005200] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1190.005202] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1190.005204] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1190.005205] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1190.005207] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1191.274850] PM: Syncing filesystems ... done. [ 1191.276807] PM: Preparing system for mem sleep [ 1192.964501] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 1192.980419] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 1192.996398] PM: Entering mem sleep [ 1192.996751] Suspending console(s) (use no_console_suspend to debug) [ 1192.997150] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1192.997171] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 1192.997264] sd 0:0:0:0: [sda] Stopping disk [ 1192.998609] sd 1:0:0:0: [sdb] Stopping disk [ 1193.232017] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 221.759 msecs [ 1193.627306] PM: suspend of drv:sd dev:0:0:0:0 complete after 630.914 msecs [ 1193.627339] PM: suspend of drv:scsi dev:target0:0:0 complete after 630.933 msecs [ 1193.627352] PM: suspend of drv:scsi dev:host0 complete after 617.721 msecs [ 1193.639559] PM: suspend of drv: dev:ata1 complete after 629.889 msecs [ 1193.655514] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 645.790 msecs [ 1193.655554] PM: suspend of drv: dev:pci0000:00 complete after 644.584 msecs [ 1193.655571] PM: suspend of devices complete after 659.492 msecs [ 1193.655574] PM: suspend devices took 0.660 seconds [ 1193.655703] PM: late suspend of devices complete after 0.126 msecs [ 1193.671664] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 1193.687642] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 1193.719481] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI [ 1193.735504] PM: noirq suspend of devices complete after 79.891 msecs [ 1193.735709] ACPI: Preparing to enter system sleep state S3 [ 1193.895522] PM: Saving platform NVS memory [ 1193.955412] Disabling non-boot CPUs ... [ 1194.059023] CPU 1 is now offline [ 1194.162900] CPU 2 is now offline [ 1194.266775] CPU 3 is now offline [ 1194.267134] Extended CMOS year: 2000 [ 1194.268470] ACPI: Low-level resume complete [ 1194.268522] PM: Restoring platform NVS memory [ 1194.270622] Extended CMOS year: 2000 [ 1194.270673] Enabling non-boot CPUs ... [ 1194.270790] Booting Node 0 Processor 1 APIC 0x2 [ 1194.284909] CPU1 is up [ 1194.285018] Booting Node 0 Processor 2 APIC 0x1 [ 1194.299288] CPU2 is up [ 1194.299450] Booting Node 0 Processor 3 APIC 0x3 [ 1194.313615] CPU3 is up [ 1194.321977] ACPI: Waking up from system sleep state S3 [ 1194.371303] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI [ 1194.371404] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 1194.371659] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 1194.372214] PM: noirq resume of devices complete after 1.112 msecs [ 1194.372305] PM: early resume of devices complete after 0.063 msecs [ 1194.372398] i915 0000:00:02.0: setting latency timer to 64 [ 1194.372404] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 1194.372493] mei 0000:00:16.0: irq 46 for MSI/MSI-X [ 1194.372552] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1194.372596] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1194.372620] ahci 0000:00:1f.2: setting latency timer to 64 [ 1194.372637] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 1194.373473] mei 0000:00:16.0: wd: failed to find the client [ 1194.425999] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 1194.549888] PM: resume of drv: dev:ep_00 complete after 176.393 msecs [ 1194.549891] PM: resume of drv: dev:ep_00 complete after 176.215 msecs [ 1194.549905] PM: resume of drv:hub dev:2-1:1.0 complete after 176.292 msecs [ 1194.549910] PM: resume of drv:usb dev:1-1.4 complete after 176.184 msecs [ 1194.549912] PM: resume of drv:usb dev:2-1.5 complete after 176.029 msecs [ 1194.549916] PM: resume of drv: dev:ep_81 complete after 176.288 msecs [ 1194.549917] PM: resume of drv:hub dev:1-1:1.0 complete after 176.525 msecs [ 1194.549929] PM: resume of drv: dev:ep_81 complete after 176.470 msecs [ 1194.549931] PM: resume of drv:usb dev:2-1.6 complete after 175.575 msecs [ 1194.622034] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd [ 1194.697756] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1194.699583] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1194.699906] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 1194.699908] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1194.700983] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1194.701052] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 1194.701066] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1194.701237] ata2.00: configured for UDMA/133 [ 1194.713779] PM: resume of drv:scsi dev:host1 complete after 341.385 msecs [ 1194.713802] PM: resume of drv:scsi_host dev:host1 complete after 341.405 msecs [ 1194.713815] PM: resume of drv:scsi dev:target1:0:0 complete after 340.821 msecs [ 1194.713837] PM: resume of drv:sd dev:1:0:0:0 complete after 340.771 msecs [ 1194.713844] sd 1:0:0:0: [sdb] Starting disk [ 1194.713935] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 340.836 msecs [ 1194.718373] PM: resume of drv:rts5139 dev:1-1.4:1.0 complete after 344.805 msecs [ 1194.718388] PM: resume of drv: dev:ep_01 complete after 344.785 msecs [ 1194.718391] PM: resume of drv: dev:ep_83 complete after 344.729 msecs [ 1194.718396] PM: resume of drv:scsi dev:host6 complete after 344.497 msecs [ 1194.718400] PM: resume of drv: dev:ep_00 complete after 344.734 msecs [ 1194.718403] PM: resume of drv: dev:ep_82 complete after 344.737 msecs [ 1194.718409] PM: resume of drv:scsi dev:target6:0:0 complete after 344.417 msecs [ 1194.718411] PM: resume of drv:scsi_host dev:host6 complete after 344.449 msecs [ 1194.718425] PM: resume of drv:sd dev:6:0:0:0 complete after 344.369 msecs [ 1194.718460] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 344.371 msecs [ 1194.785806] usb 2-1.5: reset high-speed USB device number 3 using ehci_hcd [ 1194.949625] usb 2-1.6: reset full-speed USB device number 5 using ehci_hcd [ 1194.974524] PM: resume of drv:uvcvideo dev:2-1.5:1.1 complete after 601.020 msecs [ 1194.974527] PM: resume of drv: dev:ep_00 complete after 600.966 msecs [ 1194.974540] PM: resume of drv:uvcvideo dev:2-1.5:1.0 complete after 601.110 msecs [ 1194.974549] PM: resume of drv: dev:ep_83 complete after 601.082 msecs [ 1195.044405] btusb 2-1.6:1.0: no reset_resume for driver btusb? [ 1195.044406] btusb 2-1.6:1.1: no reset_resume for driver btusb? [ 1195.044580] PM: resume of drv:usb dev:2-1.6:1.0 complete after 670.784 msecs [ 1195.044588] PM: resume of drv: dev:ep_00 complete after 670.594 msecs [ 1195.044601] PM: resume of drv:usb dev:2-1.6:1.1 complete after 670.658 msecs [ 1195.044623] PM: resume of drv: dev:ep_81 complete after 670.759 msecs [ 1195.044625] PM: resume of drv: dev:ep_03 complete after 670.661 msecs [ 1195.044627] PM: resume of drv: dev:ep_02 complete after 670.713 msecs [ 1195.044634] PM: resume of drv: dev:ep_82 complete after 670.709 msecs [ 1195.044638] PM: resume of drv: dev:ep_83 complete after 670.663 msecs [ 1196.767285] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1196.768192] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1196.768412] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 1196.768418] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1196.770545] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1196.770721] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 1196.770726] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1196.771733] ata1.00: configured for UDMA/133 [ 1196.787305] PM: resume of drv:ata_port dev:ata1 complete after 2383.760 msecs [ 1196.787309] PM: resume of drv:scsi dev:host0 complete after 2417.409 msecs [ 1196.787323] PM: resume of drv:scsi dev:target0:0:0 complete after 2416.955 msecs [ 1196.787326] PM: resume of drv:scsi_host dev:host0 complete after 2417.416 msecs [ 1196.787331] PM: resume of drv:sd dev:0:0:0:0 complete after 2416.928 msecs [ 1196.787336] sd 0:0:0:0: [sda] Starting disk [ 1196.815663] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2445.210 msecs [ 1196.815815] PM: resume of devices complete after 2446.432 msecs [ 1196.816139] PM: resume devices took 2.448 seconds [ 1196.816186] PM: Finishing wakeup. [ 1196.816187] Restarting tasks ... done. [ 1196.831578] video LNXVIDEO:00: Restoring backlight state [ 1196.832114] video LNXVIDEO:01: Restoring backlight state [ 1197.043585] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 1197.050140] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 1197.173749] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1203.678751] wlan0: authenticate with 1e:b0:94:d3:60:7a [ 1203.683783] wlan0: send auth to 1e:b0:94:d3:60:7a (try 1/3) [ 1203.690811] wlan0: authenticated [ 1203.694914] wlan0: associate with 1e:b0:94:d3:60:7a (try 1/3) [ 1203.734922] wlan0: RX AssocResp from 1e:b0:94:d3:60:7a (capab=0x431 status=0 aid=1) [ 1203.753596] wlan0: associated [ 1203.754015] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1255.659896] CPU3: Package power limit notification (total events = 3009) [ 1255.659898] CPU1: Package power limit notification (total events = 3013) [ 1255.659901] CPU2: Package power limit notification (total events = 3016) [ 1255.659902] CPU0: Package power limit notification (total events = 3015) [ 1255.670873] CPU0: Package power limit normal [ 1255.670876] CPU1: Package power limit normal [ 1255.670878] CPU2: Package power limit normal [ 1255.670880] CPU3: Package power limit normal [ 1564.013777] CPU1: Package power limit notification (total events = 3239) [ 1564.013779] CPU3: Package power limit notification (total events = 3235) [ 1564.013804] CPU2: Package power limit notification (total events = 3242) [ 1564.013806] CPU0: Package power limit notification (total events = 3241) [ 1564.024779] CPU2: Package power limit normal [ 1564.024781] CPU0: Package power limit normal [ 1564.024790] CPU1: Package power limit normal [ 1564.024792] CPU3: Package power limit normal [ 1869.794864] CPU1: Package power limit notification (total events = 3372) [ 1869.794866] CPU0: Package power limit notification (total events = 3374) [ 1869.794868] CPU2: Package power limit notification (total events = 3375) [ 1869.794869] CPU3: Package power limit notification (total events = 3368) [ 1869.805870] CPU2: Package power limit normal [ 1869.805872] CPU1: Package power limit normal [ 1869.805873] CPU0: Package power limit normal [ 1869.805875] CPU3: Package power limit normal