[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.0-7-generic (root@gomeisa) (gcc version 4.7.2 (Ubuntu 4.7.2-22ubuntu1) ) #16~lp1084783v1 SMP Tue Feb 26 20:08:41 UTC 2013 (Ubuntu 3.8.0-7.16~lp1084783v1-generic 3.8.0) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-7-generic root=UUID=8e6ab4ba-b981-4821-8683-9fa908a748e5 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bff90000-0x00000000bff9dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bff9e000-0x00000000bffdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: System manufacturer System Product Name/P5B-Deluxe, BIOS 1238 09/30/2008 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 000000000 mask F00000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 3GB, range: 1GB, type UC [ 0.000000] reg 1, base: 0GB, range: 4GB, type WB [ 0.000000] reg 2, base: 4GB, range: 1GB, type WB [ 0.000000] total RAM covered: 4096M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 4GB, range: 1GB, type WB [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbff90 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xbff8ffff] [ 0.000000] [mem 0x00000000-0xbfdfffff] page 2M [ 0.000000] [mem 0xbfe00000-0xbff8ffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xbff8ffff @ [mem 0x1fffb000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13fffffff] [ 0.000000] [mem 0x100000000-0x13fffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x13fffffff @ [mem 0xbff8e000-0xbff8ffff] [ 0.000000] RAMDISK: [mem 0x35308000-0x3697bfff] [ 0.000000] ACPI: RSDP 00000000000fae70 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bff90100 00054 (v01 _ASUS_ Notebook 09000830 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bff90290 000F4 (v03 _ASUS_ Notebook 09000830 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bff905c0 0918E (v01 A0483 A0483035 00000035 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bff9e000 00040 [ 0.000000] ACPI: SLIC 00000000000ff200 00176 (v01 _ASUS_ Notebook 20090827 MSFT 00000097) [ 0.000000] ACPI: APIC 00000000bff90390 0006C (v01 MSTEST OEMAPIC 09000830 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bff90400 0003C (v01 MSTEST OEMMCFG 09000830 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bff9e040 0007B (v01 MSTEST AMI_OEM 09000830 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bff99750 00038 (v01 MSTEST OEMHPET 09000830 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] [ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x13fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xbff8ffff] [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] [ 0.000000] On node 0 totalpages: 1048351 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12223 pages used for memmap [ 0.000000] DMA32 zone: 770001 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 258048 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bff90000 - 00000000bff9e000 [ 0.000000] PM: Registered nosave memory: 00000000bff9e000 - 00000000bffe0000 [ 0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000 [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 [ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s85056 r8192 d21440 u524288 [ 0.000000] pcpu-alloc: s85056 r8192 d21440 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031962 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-7-generic root=UUID=8e6ab4ba-b981-4821-8683-9fa908a748e5 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4022552k/5242880k available (6992k kernel code, 1049476k absent, 170852k reserved, 6250k data, 992k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2533.510 MHz processor [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5067.02 BogoMIPS (lpj=10134040) [ 0.004008] pid_max: default: 32768 minimum: 301 [ 0.004036] Security Framework initialized [ 0.004051] AppArmor: AppArmor initialized [ 0.004053] Yama: becoming mindful. [ 0.004399] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009385] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010281] Mount-cache hash table entries: 256 [ 0.010490] Initializing cgroup subsys cpuacct [ 0.010494] Initializing cgroup subsys memory [ 0.010503] Initializing cgroup subsys devices [ 0.010505] Initializing cgroup subsys freezer [ 0.010506] Initializing cgroup subsys blkio [ 0.010508] Initializing cgroup subsys perf_event [ 0.010511] Initializing cgroup subsys hugetlb [ 0.010538] CPU: Physical Processor ID: 0 [ 0.010539] CPU: Processor Core ID: 0 [ 0.010541] mce: CPU supports 6 MCE banks [ 0.010549] CPU0: Thermal monitoring enabled (TM2) [ 0.010553] process: using mwait in idle threads [ 0.010558] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.010558] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 [ 0.010558] tlb_flushall_shift: -1 [ 0.010661] Freeing SMP alternatives: 24k freed [ 0.013245] ACPI: Core revision 20121018 [ 0.016029] ftrace: allocating 26625 entries in 105 pages [ 0.024452] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.065654] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz (fam: 06, model: 17, stepping: 06) [ 0.068000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.068000] ... version: 2 [ 0.068000] ... bit width: 40 [ 0.068000] ... generic registers: 2 [ 0.068000] ... value mask: 000000ffffffffff [ 0.068000] ... max period: 000000007fffffff [ 0.068000] ... fixed-purpose events: 3 [ 0.068000] ... event mask: 0000000700000003 [ 0.068000] smpboot: Booting Node 0, Processors #1 [ 0.078129] Brought up 2 CPUs [ 0.078134] smpboot: Total of 2 processors activated (10134.04 BogoMIPS) [ 0.078240] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.080059] devtmpfs: initialized [ 0.081033] EVM: security.selinux [ 0.081035] EVM: security.SMACK64 [ 0.081037] EVM: security.capability [ 0.081048] PM: Registering ACPI NVS region [mem 0xbff9e000-0xbffdffff] (270336 bytes) [ 0.081048] regulator-dummy: no parameters [ 0.081048] NET: Registered protocol family 16 [ 0.081048] ACPI: bus type pci registered [ 0.081048] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.081048] PCI: not using MMCONFIG [ 0.081048] PCI: Using configuration type 1 for base access [ 0.081095] bio: create slab at 0 [ 0.081095] ACPI: Added _OSI(Module Device) [ 0.081095] ACPI: Added _OSI(Processor Device) [ 0.081095] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.081095] ACPI: Added _OSI(Processor Aggregator Device) [ 0.084413] ACPI: EC: Look up EC in DSDT [ 0.085513] ACPI: Executed 1 blocks of module-level executable AML code [ 0.090141] ACPI: SSDT 00000000bff9e0c0 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.090405] ACPI: Dynamic OEM Table Load: [ 0.090408] ACPI: SSDT (null) 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.090533] ACPI: SSDT 00000000bff9e290 0013A (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.090793] ACPI: Dynamic OEM Table Load: [ 0.090796] ACPI: SSDT (null) 0013A (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.090926] ACPI: Interpreter enabled [ 0.090930] ACPI: (supports S0 S1 S3 S4 S5) [ 0.090945] ACPI: Using IOAPIC for interrupt routing [ 0.090963] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.091323] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.115194] ACPI: No dock devices found. [ 0.115199] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.115248] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.115250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.115319] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.115322] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.115425] PCI host bridge to bus 0000:00 [ 0.115428] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.115430] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.115432] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.115435] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.115437] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.115439] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] [ 0.115448] pci 0000:00:00.0: [8086:29a0] type 00 class 0x060000 [ 0.115486] pci 0000:00:01.0: [8086:29a1] type 01 class 0x060400 [ 0.115520] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.115559] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 [ 0.115573] pci 0000:00:1b.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit] [ 0.115631] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.115650] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 [ 0.115709] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.115732] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400 [ 0.115791] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.115811] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400 [ 0.115870] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.115889] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 [ 0.115924] pci 0000:00:1d.0: reg 20: [io 0xa480-0xa49f] [ 0.115952] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 [ 0.115986] pci 0000:00:1d.1: reg 20: [io 0xa800-0xa81f] [ 0.116021] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 [ 0.116055] pci 0000:00:1d.2: reg 20: [io 0xa880-0xa89f] [ 0.116083] pci 0000:00:1d.3: [8086:2833] type 00 class 0x0c0300 [ 0.116118] pci 0000:00:1d.3: reg 20: [io 0xac00-0xac1f] [ 0.116153] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 [ 0.116170] pci 0000:00:1d.7: reg 10: [mem 0xfbbfbc00-0xfbbfbfff] [ 0.116243] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.116260] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.116315] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100 [ 0.116388] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.116429] pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018a [ 0.116441] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] [ 0.116448] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] [ 0.116455] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] [ 0.116462] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] [ 0.116469] pci 0000:00:1f.2: reg 20: [io 0xff90-0xff9f] [ 0.116476] pci 0000:00:1f.2: reg 24: [io 0xffa0-0xffaf] [ 0.116502] pci 0000:00:1f.2: PME# supported from D3hot [ 0.116513] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 [ 0.116523] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff] [ 0.116547] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.116576] pci 0000:00:1f.5: [8086:2825] type 00 class 0x010185 [ 0.116587] pci 0000:00:1f.5: reg 10: [io 0xa400-0xa407] [ 0.116595] pci 0000:00:1f.5: reg 14: [io 0xa080-0xa083] [ 0.116602] pci 0000:00:1f.5: reg 18: [io 0xa000-0xa007] [ 0.116609] pci 0000:00:1f.5: reg 1c: [io 0x9c00-0x9c03] [ 0.116616] pci 0000:00:1f.5: reg 20: [io 0x9880-0x988f] [ 0.116623] pci 0000:00:1f.5: reg 24: [io 0x9800-0x980f] [ 0.116648] pci 0000:00:1f.5: PME# supported from D3hot [ 0.116686] pci 0000:01:00.0: [1002:9588] type 00 class 0x030000 [ 0.116698] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.116708] pci 0000:01:00.0: reg 18: [mem 0xfbce0000-0xfbceffff 64bit] [ 0.116715] pci 0000:01:00.0: reg 20: [io 0xb000-0xb0ff] [ 0.116727] pci 0000:01:00.0: reg 30: [mem 0xfbcc0000-0xfbcdffff pref] [ 0.116755] pci 0000:01:00.0: supports D1 D2 [ 0.116773] pci 0000:01:00.1: [1002:aa08] type 00 class 0x040300 [ 0.116785] pci 0000:01:00.1: reg 10: [mem 0xfbcfc000-0xfbcfffff 64bit] [ 0.116837] pci 0000:01:00.1: supports D1 D2 [ 0.116863] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.116866] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.116868] pci 0000:00:01.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.116872] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.116906] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.116914] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref] [ 0.116964] pci 0000:03:00.0: [197b:2363] type 00 class 0x010601 [ 0.117046] pci 0000:03:00.0: reg 24: [mem 0xfbefe000-0xfbefffff] [ 0.117059] pci 0000:03:00.0: reg 30: [mem 0xfbee0000-0xfbeeffff pref] [ 0.117107] pci 0000:03:00.0: PME# supported from D3hot [ 0.117137] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185 [ 0.117160] pci 0000:03:00.1: reg 10: [io 0xdc00-0xdc07] [ 0.117173] pci 0000:03:00.1: reg 14: [io 0xd880-0xd883] [ 0.117186] pci 0000:03:00.1: reg 18: [io 0xd800-0xd807] [ 0.117199] pci 0000:03:00.1: reg 1c: [io 0xd480-0xd483] [ 0.117212] pci 0000:03:00.1: reg 20: [io 0xd400-0xd40f] [ 0.117295] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.117299] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.117302] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.117359] pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000 [ 0.117380] pci 0000:02:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit] [ 0.117391] pci 0000:02:00.0: reg 18: [io 0xc800-0xc8ff] [ 0.117431] pci 0000:02:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref] [ 0.117493] pci 0000:02:00.0: supports D1 D2 [ 0.117495] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.124020] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.124025] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.124030] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.124073] pci 0000:05:03.0: [104c:8023] type 00 class 0x0c0010 [ 0.124092] pci 0000:05:03.0: reg 10: [mem 0xfbfff800-0xfbffffff] [ 0.124104] pci 0000:05:03.0: reg 14: [mem 0xfbff8000-0xfbffbfff] [ 0.124175] pci 0000:05:03.0: supports D1 D2 [ 0.124177] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot [ 0.124197] pci 0000:05:04.0: [11ab:4320] type 00 class 0x020000 [ 0.124215] pci 0000:05:04.0: reg 10: [mem 0xfbff4000-0xfbff7fff] [ 0.124224] pci 0000:05:04.0: reg 14: [io 0xe800-0xe8ff] [ 0.124261] pci 0000:05:04.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref] [ 0.124295] pci 0000:05:04.0: supports D1 D2 [ 0.124297] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.124335] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.124339] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.124342] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.124348] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.124350] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.124352] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.124354] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.124356] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 0.124379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.124404] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.124462] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.124489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.124520] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.124552] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.129424] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.129463] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.129501] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.129541] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.129579] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.129617] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.129654] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.129691] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.129767] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.129767] vgaarb: loaded [ 0.129767] vgaarb: bridge control possible 0000:01:00.0 [ 0.129767] SCSI subsystem initialized [ 0.129767] ACPI: bus type scsi registered [ 0.129767] libata version 3.00 loaded. [ 0.129767] ACPI: bus type usb registered [ 0.129767] usbcore: registered new interface driver usbfs [ 0.129767] usbcore: registered new interface driver hub [ 0.129767] usbcore: registered new device driver usb [ 0.129767] PCI: Using ACPI for IRQ routing [ 0.135295] PCI: pci_cache_line_size set to 64 bytes [ 0.135357] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.135359] e820: reserve RAM buffer [mem 0xbff90000-0xbfffffff] [ 0.135444] NetLabel: Initializing [ 0.135446] NetLabel: domain hash size = 128 [ 0.135447] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.135457] NetLabel: unlabeled traffic allowed by default [ 0.135472] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.135472] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.135472] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.137013] Switching to clocksource hpet [ 0.142299] AppArmor: AppArmor Filesystem Enabled [ 0.142336] pnp: PnP ACPI init [ 0.142351] ACPI: bus type pnp registered [ 0.142436] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.142441] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.142485] pnp 00:01: [dma 4] [ 0.142502] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.142539] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.142559] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.142586] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.142787] pnp 00:05: [dma 0 disabled] [ 0.142839] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.142977] system 00:06: [io 0x0290-0x0297] has been reserved [ 0.142981] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143115] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.143118] system 00:07: [io 0x0800-0x087f] has been reserved [ 0.143120] system 00:07: [io 0x0480-0x04bf] has been reserved [ 0.143123] system 00:07: [mem 0xffafe000-0xffb0cbff] could not be reserved [ 0.143125] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.143127] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.143130] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.143132] system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved [ 0.143139] system 00:07: [mem 0xfebfe000-0xfebfec00] has been reserved [ 0.143142] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143211] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.143269] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.143272] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.143275] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143323] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.143389] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.143393] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143559] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.143562] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.143564] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.143566] system 00:0c: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.143570] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.143670] pnp: PnP ACPI: found 13 devices [ 0.143672] ACPI: ACPI bus type pnp unregistered [ 0.149891] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.149894] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000 [ 0.149902] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 0.149910] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.149921] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000 [ 0.149924] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.149926] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.149928] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.149933] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff] [ 0.149936] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.149939] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.149942] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.149945] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0800000-0xc08000ff] [ 0.149950] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.149953] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.149956] pci 0000:00:01.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.149959] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.149963] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.149966] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.149970] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff] [ 0.149973] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref] [ 0.149979] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.149981] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.149986] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.149989] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.149994] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.149997] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.150001] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.150005] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.150010] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.150013] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.150017] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.150036] pci 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.150052] pci 0000:00:1e.0: setting latency timer to 64 [ 0.150056] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.150058] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.150060] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.150062] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.150064] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffffffff] [ 0.150066] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.150068] pci_bus 0000:01: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.150070] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.150072] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.150074] pci_bus 0000:04: resource 1 [mem 0xc0000000-0xc03fffff] [ 0.150076] pci_bus 0000:04: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref] [ 0.150079] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.150081] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.150083] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.150085] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.150087] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.150089] pci_bus 0000:02: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.150091] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 0.150093] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff] [ 0.150095] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.150097] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.150099] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.150101] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff] [ 0.150103] pci_bus 0000:05: resource 8 [mem 0xc0000000-0xffffffff] [ 0.150137] NET: Registered protocol family 2 [ 0.150306] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.150545] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.150744] TCP: Hash tables configured (established 32768 bind 32768) [ 0.150783] TCP: reno registered [ 0.150792] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.150822] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.150895] NET: Registered protocol family 1 [ 0.176043] pci 0000:01:00.0: Boot video device [ 0.176063] PCI: CLS 32 bytes, default 64 [ 0.176126] Trying to unpack rootfs image as initramfs... [ 0.550234] Freeing initrd memory: 22992k freed [ 0.558561] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.558568] software IO TLB [mem 0xbbf8e000-0xbff8e000] (64MB) mapped at [ffff8800bbf8e000-ffff8800bff8dfff] [ 0.558913] Initialise module verification [ 0.558960] audit: initializing netlink socket (disabled) [ 0.558976] type=2000 audit(1361920516.556:1): initialized [ 0.584608] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.586125] VFS: Disk quotas dquot_6.5.2 [ 0.586165] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.586627] fuse init (API version 7.20) [ 0.586697] msgmni has been set to 7901 [ 0.587011] Key type asymmetric registered [ 0.587013] Asymmetric key parser 'x509' registered [ 0.587046] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.587070] io scheduler noop registered [ 0.587073] io scheduler deadline registered (default) [ 0.587078] io scheduler cfq registered [ 0.587195] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.587262] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.587335] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X [ 0.587410] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X [ 0.587473] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.587487] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.587530] intel_idle: does not run on family 6 model 23 [ 0.587606] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.587611] ACPI: Power Button [PWRB] [ 0.587645] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.587648] ACPI: Power Button [PWRF] [ 0.587724] ACPI: Requesting acpi_cpufreq [ 0.591604] GHES: HEST is not enabled! [ 0.591675] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.612012] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.613192] Linux agpgart interface v0.103 [ 0.614426] brd: module loaded [ 0.615032] loop: module loaded [ 0.615125] ata_piix 0000:00:1f.2: version 2.13 [ 0.615137] ata_piix 0000:00:1f.2: MAP [ [ 0.615138] P0 P2 P1 P3 ] [ 0.615174] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.615386] scsi0 : ata_piix [ 0.615962] scsi1 : ata_piix [ 0.616491] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14 [ 0.616495] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15 [ 0.616510] ata_piix 0000:00:1f.5: MAP [ [ 0.616512] P0 -- P1 -- ] [ 0.616542] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.616684] scsi2 : ata_piix [ 0.617040] scsi3 : ata_piix [ 0.617366] ata3: SATA max UDMA/133 cmd 0xa400 ctl 0xa080 bmdma 0x9880 irq 19 [ 0.617369] ata4: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9888 irq 19 [ 0.617601] libphy: Fixed MDIO Bus: probed [ 0.617659] tun: Universal TUN/TAP device driver, 1.6 [ 0.617660] tun: (C) 1999-2004 Max Krasnyansky [ 0.617694] PPP generic driver version 2.4.2 [ 0.617730] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.617732] ehci-pci: EHCI PCI platform driver [ 0.617759] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 0.617762] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.617769] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.617781] ehci-pci 0000:00:1d.7: debug port 1 [ 0.621679] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 0.621691] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbbfbc00 [ 0.632016] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.632062] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.632066] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.632069] usb usb1: Product: EHCI Host Controller [ 0.632072] usb usb1: Manufacturer: Linux 3.8.0-7-generic ehci_hcd [ 0.632075] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.632183] hub 1-0:1.0: USB hub found [ 0.632187] hub 1-0:1.0: 8 ports detected [ 0.632280] ehci-platform: EHCI generic platform driver [ 0.632287] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.632302] uhci_hcd: USB Universal Host Controller Interface driver [ 0.632317] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.632320] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.632325] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.632345] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a480 [ 0.632372] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.632374] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.632376] usb usb2: Product: UHCI Host Controller [ 0.632378] usb usb2: Manufacturer: Linux 3.8.0-7-generic uhci_hcd [ 0.632380] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.632459] hub 2-0:1.0: USB hub found [ 0.632463] hub 2-0:1.0: 2 ports detected [ 0.632520] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.632523] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.632527] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.632547] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a800 [ 0.632574] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.632576] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.632578] usb usb3: Product: UHCI Host Controller [ 0.632580] usb usb3: Manufacturer: Linux 3.8.0-7-generic uhci_hcd [ 0.632582] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.632655] hub 3-0:1.0: USB hub found [ 0.632658] hub 3-0:1.0: 2 ports detected [ 0.632714] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.632717] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.632722] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.632749] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a880 [ 0.632775] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.632777] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.632779] usb usb4: Product: UHCI Host Controller [ 0.632781] usb usb4: Manufacturer: Linux 3.8.0-7-generic uhci_hcd [ 0.632783] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.632851] hub 4-0:1.0: USB hub found [ 0.632855] hub 4-0:1.0: 2 ports detected [ 0.632910] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.632913] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.632918] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.632946] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ac00 [ 0.632972] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.632975] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.632977] usb usb5: Product: UHCI Host Controller [ 0.632979] usb usb5: Manufacturer: Linux 3.8.0-7-generic uhci_hcd [ 0.632980] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.633046] hub 5-0:1.0: USB hub found [ 0.633049] hub 5-0:1.0: 2 ports detected [ 0.633146] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.633147] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.633834] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.633911] mousedev: PS/2 mouse device common for all mice [ 0.634019] rtc_cmos 00:02: RTC can wake from S4 [ 0.634118] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.634140] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.634222] device-mapper: uevent: version 1.0.3 [ 0.634275] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com [ 0.634281] cpuidle: using governor ladder [ 0.634283] cpuidle: using governor menu [ 0.634286] ledtrig-cpu: registered to indicate activity on CPUs [ 0.634288] EFI Variables Facility v0.08 2004-May-17 [ 0.634438] ashmem: initialized [ 0.634537] TCP: cubic registered [ 0.634632] NET: Registered protocol family 10 [ 0.634784] NET: Registered protocol family 17 [ 0.634795] Key type dns_resolver registered [ 0.634962] Loading module verification certificates [ 0.635941] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: b371b998e362632fc11307b4a49a5b3933a79263' [ 0.635955] registered taskstats version 1 [ 0.638083] Key type trusted registered [ 0.639743] Key type encrypted registered [ 0.641690] rtc_cmos 00:02: setting system clock to 2013-02-26 23:15:17 UTC (1361920517) [ 0.642084] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.642086] EDD information not available. [ 0.657956] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.946573] ata3: SATA link down (SStatus 0 SControl 300) [ 0.957160] ata4: SATA link down (SStatus 0 SControl 300) [ 1.352017] usb 2-1: new low-speed USB device number 2 using uhci_hcd [ 1.412072] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.412083] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.466552] ata1.00: ATA-7: ST380815AS, 3.AAC, max UDMA/133 [ 1.466556] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.506383] usb 2-1: New USB device found, idVendor=04b4, idProduct=0033 [ 1.506388] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.533191] ata1.00: configured for UDMA/133 [ 1.533325] scsi 0:0:0:0: Direct-Access ATA ST380815AS 3.AA PQ: 0 ANSI: 5 [ 1.533444] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.533473] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.533490] sd 0:0:0:0: [sda] Write Protect is off [ 1.533493] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.533513] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.556016] tsc: Refined TSC clocksource calibration: 2533.332 MHz [ 1.556021] Switching to clocksource tsc [ 1.581198] sda: sda1 sda2 sda3 [ 1.581464] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.748013] usb 2-2: new full-speed USB device number 3 using uhci_hcd [ 1.906379] usb 2-2: New USB device found, idVendor=045e, idProduct=00f7 [ 1.906383] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.906386] usb 2-2: Product: USB camera [ 2.148013] usb 3-1: new full-speed USB device number 2 using uhci_hcd [ 2.301581] usb 3-1: New USB device found, idVendor=055f, idProduct=021f [ 2.301586] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.301589] usb 3-1: Product: USB Scanner [ 2.644049] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.644062] ata2.01: SATA link down (SStatus 0 SControl 300) [ 2.644073] ata2.01: link offline, clearing class 3 to NONE [ 2.668214] ata2.00: ATAPI: LITE-ON DVDRW LH-20A1P, KL0P, max UDMA/66 [ 2.700212] ata2.00: configured for UDMA/66 [ 3.387397] scsi 1:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1P KL0P PQ: 0 ANSI: 5 [ 3.707667] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.707671] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.707775] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.707863] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.709182] Freeing unused kernel memory: 992k freed [ 3.709423] Write protecting the kernel read-only data: 12288k [ 3.712445] Freeing unused kernel memory: 1188k freed [ 3.715233] Freeing unused kernel memory: 1076k freed [ 3.729739] udevd[106]: starting version 175 [ 3.782459] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 3.785904] [drm] Initialized drm 1.1.0 20060810 [ 3.801942] scsi4 : pata_jmicron [ 3.807519] sky2: driver version 1.30 [ 3.807579] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2 [ 3.807664] sky2 0000:02:00.0: irq 44 for MSI/MSI-X [ 3.807713] scsi5 : pata_jmicron [ 3.807928] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17 [ 3.807931] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17 [ 3.807964] ahci 0000:03:00.0: version 3.0 [ 3.811852] sky2 0000:02:00.0 eth0: addr 00:1a:92:3a:48:ca [ 3.813185] skge: 1.14 addr 0xfbff4000 irq 19 chip Yukon-Lite rev 9 [ 3.813345] skge 0000:05:04.0 eth1: addr 00:1a:92:3a:31:5a [ 3.824117] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 3.824123] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 3.827770] scsi6 : ahci [ 3.830375] scsi7 : ahci [ 3.830451] ata7: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 16 [ 3.830455] ata8: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe180 irq 16 [ 3.830774] [drm] radeon defaulting to kernel modesetting. [ 3.830776] [drm] radeon kernel modesetting enabled. [ 3.838981] [drm] initializing kernel modesetting (RV630 0x1002:0x9588 0x1002:0x2542). [ 3.839004] [drm] register mmio base: 0xFBCE0000 [ 3.839005] [drm] register mmio size: 65536 [ 3.839762] ATOM BIOS: 113 [ 3.839783] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used) [ 3.839786] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF [ 3.842867] [drm] Detected VRAM RAM=256M, BAR=256M [ 3.842870] [drm] RAM width 128bits DDR [ 3.844925] [TTM] Zone kernel: Available graphics memory: 2024412 kiB [ 3.844928] [TTM] Initializing pool allocator [ 3.844932] [TTM] Initializing DMA pool allocator [ 3.844953] [drm] radeon: 256M of VRAM memory ready [ 3.844954] [drm] radeon: 512M of GTT memory ready. [ 3.845044] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 3.845045] [drm] Driver supports precise vblank timestamp query. [ 3.845151] radeon 0000:01:00.0: irq 45 for MSI/MSI-X [ 3.845161] radeon 0000:01:00.0: radeon: using MSI. [ 3.845186] [drm] radeon: irq initialized. [ 3.845190] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 3.847646] [drm] probing gen 2 caps for device 8086:29a1 = 1/0 [ 3.847881] [drm] Loading RV630 Microcode [ 3.872309] usbcore: registered new interface driver usbhid [ 3.872313] usbhid: USB HID core driver [ 3.875556] input: HID 04b4:0033 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3 [ 3.875723] hid-generic 0003:04B4:0033.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b4:0033] on usb-0000:00:1d.0-1/input0 [ 3.881559] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 3.881689] radeon 0000:01:00.0: WB enabled [ 3.881693] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff880134d30c00 [ 3.881696] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xffff880134d30c0c [ 3.895166] firewire_ohci 0000:05:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 3.913169] [drm] ring test on 0 succeeded in 1 usecs [ 3.913226] [drm] ring test on 3 succeeded in 1 usecs [ 3.913575] [drm] ib test on ring 0 succeeded in 0 usecs [ 3.913586] [drm] ib test on ring 3 succeeded in 0 usecs [ 3.913806] [drm] Radeon Display Connectors [ 3.913808] [drm] Connector 0: [ 3.913809] [drm] DIN-1 [ 3.913810] [drm] Encoders: [ 3.913812] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 3.913813] [drm] Connector 1: [ 3.913814] [drm] DVI-I-1 [ 3.913815] [drm] HPD1 [ 3.913817] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 3.913818] [drm] Encoders: [ 3.913819] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 3.913821] [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [ 3.913822] [drm] Connector 2: [ 3.913823] [drm] DVI-I-2 [ 3.913824] [drm] HPD2 [ 3.913826] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 3.913827] [drm] Encoders: [ 3.913828] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 3.913829] [drm] DFP2: INTERNAL_LVTM1 [ 3.913841] [drm] Internal thermal controller with fan control [ 3.913869] [drm] radeon: power management initialized [ 3.972715] ata5.00: ATA-6: WDC WD800JB-00FMA0, 13.03G13, max UDMA/100 [ 3.972718] ata5.00: 156301488 sectors, multi 0: LBA [ 3.980677] ata5.00: configured for UDMA/100 [ 3.980761] scsi 4:0:0:0: Direct-Access ATA WDC WD800JB-00FM 13.0 PQ: 0 ANSI: 5 [ 3.980918] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 3.981128] sd 4:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 3.981173] sd 4:0:0:0: [sdb] Write Protect is off [ 3.981176] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.981196] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.985444] [drm] fb mappable at 0xD0142000 [ 3.985446] [drm] vram apper at 0xD0000000 [ 3.985447] [drm] size 7299072 [ 3.985448] [drm] fb depth is 24 [ 3.985449] [drm] pitch is 6912 [ 3.985502] fbcon: radeondrmfb (fb0) is primary device [ 4.006175] sdb: sdb1 sdb2 sdb3 [ 4.006481] sd 4:0:0:0: [sdb] Attached SCSI disk [ 4.148030] ata8: SATA link down (SStatus 0 SControl 300) [ 4.148061] ata7: SATA link down (SStatus 0 SControl 300) [ 4.200109] Console: switching to colour frame buffer device 210x65 [ 4.203938] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 4.203940] radeon 0000:01:00.0: registered panic notifier [ 4.203946] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0 [ 4.392116] firewire_core 0000:05:03.0: created device fw0: GUID 0011d800011b7f95, S400 [ 5.007158] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 18.729327] Adding 7812092k swap on /dev/sdb2. Priority:-1 extents:1 across:7812092k [ 18.733916] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.733923] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 18.795326] udevd[389]: starting version 175 [ 18.994371] type=1400 audit(1361913335.849:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=451 comm="apparmor_parser" [ 18.994714] type=1400 audit(1361913335.849:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=451 comm="apparmor_parser" [ 18.995044] type=1400 audit(1361913335.849:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=451 comm="apparmor_parser" [ 19.178906] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60c [ 19.429558] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60c [ 19.431111] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 19.571648] lp: driver loaded but no devices found [ 19.673724] Linux video capture interface: v2.00 [ 19.701102] gpio_ich: GPIO from 206 to 255 on gpio_ich [ 19.760354] gspca_main: v2.14.0 registered [ 19.768606] gspca_main: sonixj-2.14.0 probing 045e:00f7 [ 19.776407] input: sonixj as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/input/input4 [ 19.777517] usbcore: registered new interface driver sonixj [ 19.862546] w83627ehf: Found W83627DHG chip at 0x290 [ 19.862628] ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.HWRE 1 (20121018/utaddress-251) [ 19.862634] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 19.908695] usbcore: registered new interface driver snd-usb-audio [ 19.915066] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 20.308080] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 20.308143] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X [ 20.321903] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input5 [ 20.505789] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 20.614709] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [ 21.008144] init: failsafe main process (967) killed by TERM signal [ 21.130090] type=1400 audit(1361913337.985:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1048 comm="apparmor_parser" [ 21.132067] type=1400 audit(1361913337.989:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1047 comm="apparmor_parser" [ 21.132352] type=1400 audit(1361913337.989:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1048 comm="apparmor_parser" [ 21.132367] type=1400 audit(1361913337.989:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1047 comm="apparmor_parser" [ 21.132547] type=1400 audit(1361913337.989:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1048 comm="apparmor_parser" [ 21.135610] type=1400 audit(1361913337.989:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1050 comm="apparmor_parser" [ 21.136116] type=1400 audit(1361913337.993:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1050 comm="apparmor_parser" [ 21.320246] ppdev: user-space parallel port driver [ 21.370220] sky2 0000:02:00.0 eth0: enabling interface [ 21.370284] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.370841] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.401970] Bluetooth: Core ver 2.16 [ 21.401988] NET: Registered protocol family 31 [ 21.401990] Bluetooth: HCI device and connection manager initialized [ 21.402000] Bluetooth: HCI socket layer initialized [ 21.402002] Bluetooth: L2CAP socket layer initialized [ 21.402008] Bluetooth: SCO socket layer initialized [ 21.405687] skge 0000:05:04.0 eth1: enabling interface [ 21.408709] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 21.409383] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 21.428642] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.428645] Bluetooth: BNEP filters: protocol multicast [ 21.428655] Bluetooth: BNEP socket layer initialized [ 21.458369] Bluetooth: RFCOMM TTY layer initialized [ 21.458380] Bluetooth: RFCOMM socket layer initialized [ 21.458382] Bluetooth: RFCOMM ver 1.11 [ 22.052109] microcode: CPU0 updated to revision 0x60f, date = 2010-09-29 [ 22.057188] microcode: CPU1 updated to revision 0x60f, date = 2010-09-29 [ 23.187098] sky2 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 23.187113] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 23.710104] init: plymouth-stop pre-start process (1669) terminated with status 1