lspci -vvn
---------------



00:00.0 0600: 8086:3575 (rev 04)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
        Capabilities: [40] Vendor Specific Information
        Capabilities: [a0] AGP version 2.0
                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
                Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1

00:01.0 0604: 8086:3576 (rev 04) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: fc000000-fdffffff
        Prefetchable memory behind bridge: e0000000-e7ffffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:1d.0 0c03: 8086:2482 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 8086:4541
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 4: I/O ports at bf80 [size=32]

00:1e.0 0604: 8086:2448 (rev 42) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=10, sec-latency=32
        I/O behind bridge: 0000e000-0000ffff
        Memory behind bridge: f4000000-fbffffff
        Prefetchable memory behind bridge: 20000000-29ffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 0601: 8086:248c (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:1f.1 0101: 8086:248a (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: 8086:4541
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at bfa0 [size=16]
        Region 5: Memory at 2a000000 (32-bit, non-prefetchable) [size=1K]

00:1f.5 0401: 8086:2485 (rev 02)
        Subsystem: 1013:5959
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 5
        Region 0: I/O ports at d800 [size=256]
        Region 1: I/O ports at dc80 [size=64]

00:1f.6 0703: 8086:2486 (rev 02) (prog-if 00 [Generic])
        Subsystem: 134d:4c21
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 5
        Region 0: I/O ports at d400 [size=256]
        Region 1: I/O ports at dc00 [size=128]

01:00.0 0300: 1002:4c59 (prog-if 00 [VGA])
        Subsystem: 1028:00e3
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (2000ns min), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at c000 [size=256]
        Region 2: Memory at fcff0000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at fc000000 [disabled] [size=128K]
        Capabilities: [58] AGP version 2.0
                Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
                Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:00.0 0200: 10b7:9200 (rev 78)
        Subsystem: 1028:00e3
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at ec80 [size=128]
        Region 1: Memory at f8fffc00 (32-bit, non-prefetchable) [size=128]
        Expansion ROM at 28000000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

02:01.0 0607: 104c:ac51
        Subsystem: 1028:00e3
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 168, Cache Line Size: 128 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
        Memory window 0: 20000000-23fff000 (prefetchable)
        Memory window 1: f4000000-f7fff000
        I/O window 0: 0000e000-0000e0ff
        I/O window 1: 0000e400-0000e4ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001

02:01.1 0607: 104c:ac51
        Subsystem: 1028:00e3
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 168, Cache Line Size: 128 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at f8001000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
        Memory window 0: 24000000-27fff000 (prefetchable)
        Memory window 1: 2c000000-2ffff000
        I/O window 0: 0000e800-0000e8ff
        I/O window 1: 00001000-000010ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
        16-bit legacy interface ports at 0001

07:00.0 0280: 1814:0201 (rev 01)
        Subsystem: 1948:3c00
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at 2c000000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-





dmesg
--------------


[    0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000000fed3000 end: 000000000ffd3000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000ffd3000 size: 000000000002d000 end: 0000000010000000 type: 2
[    0.000000] copy_e820_map() start: 00000000feda0000 size: 0000000000060000 end: 00000000fee00000 type: 2
[    0.000000] copy_e820_map() start: 00000000ffb80000 size: 0000000000480000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000000ffd3000 (usable)
[    0.000000]  BIOS-e820: 000000000ffd3000 - 0000000010000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 255MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 65491) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->    65491
[    0.000000]   HighMem     65491 ->    65491
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->    65491
[    0.000000] On node 0 totalpages: 65491
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 479 pages used for memmap
[    0.000000]   Normal zone: 60916 pages, LIFO batch:15
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP (v000 DELL                                  ) @ 0x000fde50
[    0.000000] ACPI: RSDT (v001 DELL    CPi R   0x27d30510 ASL  0x00000061) @ 0x000fde64
[    0.000000] ACPI: FADT (v001 DELL    CPi R   0x27d30510 ASL  0x00000061) @ 0x000fde90
[    0.000000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:eeda0000)
[    0.000000] Detected 996.737 MHz processor.
[   13.508445] Built 1 zonelists.  Total pages: 64980
[   13.508453] Kernel command line: root=UUID=7dc27ef5-919f-4ee2-8fe9-956edc4d7c84 ro quiet splash
[   13.508855] Local APIC disabled by BIOS -- you can enable it with "lapic"
[   13.508868] mapped APIC to ffffd000 (0120a000)
[   13.508877] Enabling fast FPU save and restore... done.
[   13.508883] Enabling unmasked SIMD FPU exception support... done.
[   13.508897] Initializing CPU#0
[   13.508983] PID hash table entries: 1024 (order: 10, 4096 bytes)
[   13.510320] Console: colour VGA+ 80x25
[   13.510538] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[   13.510796] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[   13.526528] Memory: 248768k/261964k available (1992k kernel code, 12732k reserved, 893k data, 328k init, 0k highmem)
[   13.526550] virtual kernel memory layout:
[   13.526553]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   13.526556]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   13.526559]     vmalloc : 0xd0800000 - 0xff7fe000   ( 751 MB)
[   13.526562]     lowmem  : 0xc0000000 - 0xcffd3000   ( 255 MB)
[   13.526565]       .init : 0xc03d7000 - 0xc0429000   ( 328 kB)
[   13.526568]       .data : 0xc02f2264 - 0xc03d16d4   ( 893 kB)
[   13.526570]       .text : 0xc0100000 - 0xc02f2264   (1992 kB)
[   13.526577] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   13.604954] Calibrating delay using timer specific routine.. 1994.96 BogoMIPS (lpj=3989932)
[   13.605038] Security Framework v1.0.0 initialized
[   13.605052] SELinux:  Disabled at boot.
[   13.605087] Mount-cache hash table entries: 512
[   13.605341] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[   13.605362] CPU: L1 I cache: 16K, L1 D cache: 16K
[   13.605367] CPU: L2 cache: 512K
[   13.605373] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[   13.605391] Compat vDSO mapped to ffffe000.
[   13.605399] Remapping vsyscall page to ffffe000
[   13.605416] Checking 'hlt' instruction... OK.
[   13.621067] SMP alternatives: switching to UP code
[   13.621301] Freeing SMP alternatives: 11k freed
[   13.621608] Early unpacking initramfs... done
[   14.222016] ACPI: Core revision 20060707
[   14.227680] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   14.230686] ACPI: setting ELCR to 0200 (from 0800)
[   15.268403] CPU0: Intel(R) Pentium(R) III Mobile CPU      1000MHz stepping 01
[   15.268414] SMP motherboard not detected.
[   15.268419] Local APIC not detected. Using dummy APIC emulation.
[   15.268500] Brought up 1 CPUs
[   15.268989] Booting paravirtualized kernel on bare hardware
[   15.269110] Time:  8:50:14  Date: 03/25/107
[   15.269173] NET: Registered protocol family 16
[   15.269367] EISA bus registered
[   15.269376] ACPI: bus type pci registered
[   15.291824] PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2
[   15.291829] PCI: Using configuration type 1
[   15.291833] Setting up standard PCI resources
[   15.306877] ACPI: Interpreter enabled
[   15.306884] ACPI: Using PIC for interrupt routing
[   15.308246] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   15.308261] PCI: Probing PCI hardware (bus 00)
[   15.308516] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[   15.319919] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[   15.319927] PCI quirk: region 0880-08bf claimed by ICH4 GPIO
[   15.320144] Boot video device is 0000:01:00.0
[   15.320343] PCI: Transparent bridge - 0000:00:1e.0
[   15.320519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   15.370320] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[   15.370833] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
[   15.371337] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
[   15.371840] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
[   15.373831] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[   15.374255] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[   15.375333] ACPI: Power Resource [PADA] (on)
[   15.375801] Linux Plug and Play Support v0.97 (c) Adam Belay
[   15.375823] pnp: PnP ACPI init
[   15.467127] pnp: PnP ACPI: found 18 devices
[   15.467137] PnPBIOS: Disabled by ACPI PNP
[   15.467245] PCI: Using ACPI for IRQ routing
[   15.467251] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   15.470732] NET: Registered protocol family 8
[   15.470737] NET: Registered protocol family 20
[   15.481293] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
[   15.481300] pnp: 00:02: ioport range 0x800-0x805 could not be reserved
[   15.481307] pnp: 00:02: ioport range 0x808-0x80f could not be reserved
[   15.481318] pnp: 00:03: ioport range 0x806-0x807 has been reserved
[   15.481324] pnp: 00:03: ioport range 0x810-0x85f could not be reserved
[   15.481330] pnp: 00:03: ioport range 0x860-0x87f has been reserved
[   15.481336] pnp: 00:03: ioport range 0x880-0x8bf has been reserved
[   15.481341] pnp: 00:03: ioport range 0x8c0-0x8df has been reserved
[   15.481347] pnp: 00:03: ioport range 0x8e0-0x8ff has been reserved
[   15.481358] pnp: 00:04: ioport range 0xf000-0xf0fe has been reserved
[   15.481364] pnp: 00:04: ioport range 0xf100-0xf1fe has been reserved
[   15.481370] pnp: 00:04: ioport range 0xf200-0xf2fe has been reserved
[   15.481376] pnp: 00:04: ioport range 0xf400-0xf4fe has been reserved
[   15.481383] pnp: 00:04: ioport range 0xf500-0xf5fe has been reserved
[   15.481390] pnp: 00:04: ioport range 0xf600-0xf6fe has been reserved
[   15.481396] pnp: 00:04: ioport range 0xf800-0xf8fe has been reserved
[   15.481402] pnp: 00:04: ioport range 0xf900-0xf9fe has been reserved
[   15.481415] pnp: 00:09: ioport range 0x900-0x91f has been reserved
[   15.481421] pnp: 00:09: ioport range 0x3f0-0x3f1 has been reserved
[   15.481441] pnp: 00:10: ioport range 0xbf40-0xbf5f has been reserved
[   15.481447] pnp: 00:10: ioport range 0xbf20-0xbf3f has been reserved
[   15.482010] PCI: Bridge: 0000:00:01.0
[   15.482016]   IO window: c000-cfff
[   15.482022]   MEM window: fc000000-fdffffff
[   15.482028]   PREFETCH window: e0000000-e7ffffff
[   15.482048] PCI: Bus 3, cardbus bridge: 0000:02:01.0
[   15.482053]   IO window: 0000e000-0000e0ff
[   15.482059]   IO window: 0000e400-0000e4ff
[   15.482065]   PREFETCH window: 20000000-23ffffff
[   15.482072]   MEM window: f4000000-f7ffffff
[   15.482078] PCI: Bus 7, cardbus bridge: 0000:02:01.1
[   15.482082]   IO window: 0000e800-0000e8ff
[   15.482088]   IO window: 00001000-000010ff
[   15.482094]   PREFETCH window: 24000000-27ffffff
[   15.482101]   MEM window: 2c000000-2fffffff
[   15.482106] PCI: Bridge: 0000:00:1e.0
[   15.482111]   IO window: e000-ffff
[   15.482118]   MEM window: f4000000-fbffffff
[   15.482125]   PREFETCH window: 20000000-29ffffff
[   15.482144] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   15.482160] PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
[   15.482531] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[   15.482538] PCI: setting IRQ 11 as level-triggered
[   15.482544] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[   15.482564] PCI: Enabling device 0000:02:01.1 (0000 -> 0003)
[   15.482571] ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[   15.482630] NET: Registered protocol family 2
[   15.520425] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[   15.520583] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[   15.520741] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[   15.520820] TCP: Hash tables configured (established 8192 bind 4096)
[   15.520826] TCP reno registered
[   15.532535] checking if image is initramfs... it is
[   16.671595] Freeing initrd memory: 6784k freed
[   16.672553] audit: initializing netlink socket (disabled)
[   16.672585] audit(1177491015.320:1): initialized
[   16.672851] VFS: Disk quotas dquot_6.5.1
[   16.672890] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   16.673007] io scheduler noop registered
[   16.673014] io scheduler anticipatory registered
[   16.673019] io scheduler deadline registered
[   16.673040] io scheduler cfq registered (default)
[   16.673525] isapnp: Scanning for PnP cards...
[   17.026241] isapnp: No Plug & Play device found
[   17.079977] Real Time Clock Driver v1.12ac
[   17.080092] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   17.080253] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   17.080509] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   17.081508] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   17.082329] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[   17.082338] PCI: setting IRQ 5 as level-triggered
[   17.082343] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[   17.082361] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[   17.082508] mice: PS/2 mouse device common for all mice
[   17.083676] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   17.084240] input: Macintosh mouse button emulation as /class/input/input0
[   17.084310] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   17.084319] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   17.084604] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   17.090255] serio: i8042 KBD port at 0x60,0x64 irq 1
[   17.090267] serio: i8042 AUX port at 0x60,0x64 irq 12
[   17.090518] EISA: Probing bus 0 at eisa.0
[   17.090533] Cannot allocate resource for EISA slot 1
[   17.090559] EISA: Detected 0 cards.
[   17.120726] TCP cubic registered
[   17.120742] NET: Registered protocol family 1
[   17.120788] Using IPI No-Shortcut mode
[   17.120912] ACPI: (supports S0 S1 S3 S4 S5)
[   17.120995]   Magic number: 3:500:827
[   17.121159]   hash matches device ptyt7
[   17.121177]   hash matches device ptyqa
[   17.121613] Freeing unused kernel memory: 328k freed
[   17.123697] input: AT Translated Set 2 keyboard as /class/input/input1
[   17.123750] Time: tsc clocksource has been installed.
[   18.483854] Capability LSM initialized
[   18.642666] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   18.657381] ACPI: Thermal Zone [THM] (32 C)
[   19.551489] SCSI subsystem initialized
[   19.569657] libata version 2.20 loaded.
[   19.581167] ata_piix 0000:00:1f.1: version 2.10ac1
[   19.581192] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[   19.581691] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[   19.581698] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   19.581728] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   19.581816] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
[   19.581865] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
[   19.581898] scsi0 : ata_piix
[   19.679848] usbcore: registered new interface driver usbfs
[   19.679897] usbcore: registered new interface driver hub
[   19.679941] usbcore: registered new device driver usb
[   19.743332] ata1.00: ata_hpa_resize 1: sectors = 58605120, hpa_sectors = 58605120
[   19.743343] ata1.00: ATA-5: IC25N030ATCS04-0, CA3OA71A, max UDMA/100
[   19.743349] ata1.00: 58605120 sectors, multi 8: LBA 
[   19.751345] ata1.00: ata_hpa_resize 1: sectors = 58605120, hpa_sectors = 58605120
[   19.751356] ata1.00: configured for UDMA/100
[   19.751378] scsi1 : ata_piix
[   19.815189] USB Universal Host Controller Interface driver v3.0
[   19.911579] Floppy drive(s): fd0 is 1.44M
[   19.987886] FDC 0 is a post-1991 82077
[   20.070956] ata2.00: ATAPI, max UDMA/33
[    5.552000] Time: acpi_pm clocksource has been installed.
[    5.700000] ata2.00: configured for UDMA/33
[    5.700000] scsi 0:0:0:0: Direct-Access     ATA      IC25N030ATCS04-0 CA3O PQ: 0 ANSI: 5
[    5.700000] scsi 1:0:0:0: CD-ROM            LG       CD-ROM CRN-8245B 1.18 PQ: 0 ANSI: 5
[    5.708000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    5.708000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[    5.708000] 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
[    5.708000] 0000:02:00.0: 3Com PCI 3c905C Tornado at d081ec00.
[    5.728000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[    5.728000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    5.728000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.728000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    5.728000] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
[    5.732000] usb usb1: configuration #1 chosen from 1 choice
[    5.732000] hub 1-0:1.0: USB hub found
[    5.732000] hub 1-0:1.0: 2 ports detected
[    5.756000] SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB)
[    5.756000] sda: Write Protect is off
[    5.756000] sda: Mode Sense: 00 3a 00 00
[    5.756000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.756000] SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB)
[    5.756000] sda: Write Protect is off
[    5.756000] sda: Mode Sense: 00 3a 00 00
[    5.756000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.756000]  sda: sda1 sda2 sda3
[    5.776000] sd 0:0:0:0: Attached scsi disk sda
[    5.784000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.784000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[    5.792000] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[    5.792000] Uniform CD-ROM driver Revision: 3.20
[    5.792000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    6.108000] Attempting manual resume
[    6.108000] swsusp: Resume From Partition 8:1
[    6.108000] PM: Checking swsusp image.
[    6.132000] PM: Resume from disk failed.
[    6.196000] kjournald starting.  Commit interval 5 seconds
[    6.196000] EXT3-fs: mounted filesystem with ordered data mode.
[   24.016000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   24.020000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   24.044000] iTCO_vendor_support: vendor-support=0
[   24.044000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   24.048000] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x0860)
[   24.048000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   24.080000] intel_rng: FWH not detected
[   24.312000] Linux agpgart interface v0.102 (c) Dave Jones
[   24.380000] agpgart: Detected an Intel 830M Chipset.
[   24.392000] agpgart: AGP aperture is 256M @ 0xd0000000
[   25.112000] logips2pp: Detected unknown logitech mouse model 1
[   25.264000] input: PC Speaker as /class/input/input2
[   25.284000] Yenta: CardBus bridge found at 0000:02:01.0 [1028:00e3]
[   25.284000] Yenta: Using CSCINT to route CSC interrupts to PCI
[   25.284000] Yenta: Routing CardBus interrupts to PCI
[   25.284000] Yenta TI: socket 0000:02:01.0, mfunc 0x01261222, devctl 0x64
[   25.516000] Yenta: ISA IRQ mask 0x0498, PCI irq 11
[   25.516000] Socket status: 30000006
[   25.516000] pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
[   25.516000] cs: IO port probe 0xe000-0xffff: clean.
[   25.516000] pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
[   25.516000] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x29ffffff
[   25.516000] Yenta: CardBus bridge found at 0000:02:01.1 [1028:00e3]
[   25.516000] Yenta: Using CSCINT to route CSC interrupts to PCI
[   25.516000] Yenta: Routing CardBus interrupts to PCI
[   25.516000] Yenta TI: socket 0000:02:01.1, mfunc 0x01261222, devctl 0x64
[   25.624000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[   25.748000] Yenta: ISA IRQ mask 0x0498, PCI irq 11
[   25.748000] Socket status: 30000020
[   25.748000] pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
[   25.748000] cs: IO port probe 0xe000-0xffff: clean.
[   25.748000] pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
[   25.748000] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x29ffffff
[   26.028000] parport: PnPBIOS parport detected.
[   26.028000] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   26.156000] irda_init()
[   26.156000] NET: Registered protocol family 23
[   26.384000] pccard: CardBus card inserted into slot 1
[   26.392000] found SMC SuperIO Chip (devid=0x0e rev=01 base=0x002e): LPC47N252
[   26.392000] smsc_ircc_present: can't get sir_base of 0x2f8
[   26.708000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[   26.708000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   26.880000] cs: IO port probe 0x100-0x3af: excluding 0x280-0x287
[   26.884000] cs: IO port probe 0x3e0-0x4ff: clean.
[   26.884000] cs: IO port probe 0x820-0x8ff: clean.
[   26.884000] cs: IO port probe 0xc00-0xcf7: clean.
[   26.884000] cs: IO port probe 0xa00-0xaff: clean.
[   26.884000] cs: IO port probe 0x100-0x3af: excluding 0x280-0x287
[   26.888000] cs: IO port probe 0x3e0-0x4ff: clean.
[   26.888000] cs: IO port probe 0x820-0x8ff: clean.
[   26.888000] cs: IO port probe 0xc00-0xcf7: clean.
[   26.888000] cs: IO port probe 0xa00-0xaff: clean.
[   27.276000] intel8x0_measure_ac97_clock: measured 55384 usecs
[   27.276000] intel8x0: clocking to 48000
[   27.280000] PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
[   27.280000] ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[   27.280000] rt2500 1.1.0 BETA4 2006/06/18 http://rt2x00.serialmonkey.com
[   27.280000] PCI: Setting latency timer of device 0000:07:00.0 to 64
[   27.316000] rt2500 EEPROM:  1  2  3  4  5  6  7  8  9 10 11 12 13 14  Channel
[   27.316000] rt2500 EEPROM:  4  4  4  4  4  4  4  4  4  3  3  3  3  3  dBm Maximum
[   27.556000] NET: Registered protocol family 10
[   27.556000] lo: Disabled Privacy Extensions
[   27.588000] lp0: using parport0 (interrupt-driven).
[   27.636000] Adding 489940k swap on /dev/disk/by-uuid/c20ee0f1-1cb6-4572-a105-a0a40b59df49.  Priority:-1 extents:1 across:489940k
[   27.840000] EXT3 FS on sda2, internal journal
[   28.172000] kjournald starting.  Commit interval 5 seconds
[   28.188000] EXT3 FS on sda3, internal journal
[   28.188000] EXT3-fs: mounted filesystem with ordered data mode.
[   29.156000] ACPI: ACPI Dock Station Driver 
[   29.200000] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   29.352000] ACPI: AC Adapter [AC] (on-line)
[   29.376000] ACPI: Battery Slot [BAT0] (battery absent)
[   29.376000] ACPI: Battery Slot [BAT1] (battery absent)
[   29.472000] input: Lid Switch as /class/input/input4
[   29.480000] ACPI: Lid Switch [LID]
[   29.540000] input: Power Button (CM) as /class/input/input5
[   29.540000] ACPI: Power Button (CM) [PBTN]
[   29.572000] input: Sleep Button (CM) as /class/input/input6
[   29.572000] ACPI: Sleep Button (CM) [SBTN]
[   29.684000] Using specific hotkey driver
[   29.724000] ibm_acpi: ec object not found
[   29.864000] pcc_acpi: loading...
[   37.544000] eth0:  setting half-duplex.
[   37.544000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   38.144000] ra0: no IPv6 routers present
[   39.276000] [drm] Initialized drm 1.1.0 20060810
[   39.304000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   39.308000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[   39.844000] ppdev: user-space parallel port driver
[   41.184000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   41.184000] apm: overridden by ACPI.
[   41.196000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[   41.196000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[   41.196000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[   41.520000] [drm] Setting GART location based on new memory map
[   41.520000] [drm] writeback test succeeded in 1 usecs