| 2012-11-25 17:01:35 |
Endre Kollár |
bug |
|
|
added bug |
| 2012-11-25 17:30:12 |
Brad Figg |
linux (Ubuntu): status |
New |
Confirmed |
|
| 2012-11-26 15:53:43 |
Endre Kollár |
attachment added |
|
kern.log when plug in the device https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1082920/+attachment/3444140/+files/plug-in.log |
|
| 2012-11-26 15:55:12 |
Endre Kollár |
attachment added |
|
kern.log when eject the device https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1082920/+attachment/3444141/+files/eject.log |
|
| 2012-11-26 15:56:13 |
Endre Kollár |
attachment added |
|
kern.log when plug out the device https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1082920/+attachment/3444142/+files/plug-out.log |
|
| 2012-11-26 16:28:20 |
Endre Kollár |
description |
Reproduced this bug on "Daily Build" live cd:
http://cdimage.ubuntu.com/precise/daily/current/
Plug in the USB stick: (DMESG)
[ 354.732093] usb 2-1: new high-speed USB device number 3 using ehci_hcd
[ 354.907701] Initializing USB Mass Storage driver...
[ 354.907892] scsi6 : usb-storage 2-1:1.0
[ 354.908037] usbcore: registered new interface driver usb-storage
[ 354.908040] USB Mass Storage support registered.
[ 354.909714] usbcore: registered new interface driver uas
[ 355.929718] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 108 PMAP PQ: 0 ANSI: 0 CCS
[ 355.930970] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 356.706843] sd 6:0:0:0: [sdb] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 356.708571] sd 6:0:0:0: [sdb] Write Protect is off
[ 356.708577] sd 6:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 356.710320] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.710326] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.716318] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.716325] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.733983] sdb: sdb1
[ 356.739312] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.739317] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.739321] sd 6:0:0:0: [sdb] Attached SCSI removable disk
(System created sdb,sdb1 files, and mounted sdb1 filesystem correctly)
I click the "Eject" command on USB stick with the GUI.(I want only unmount the sdb1 filesystem)
Unexcepted message(DMESG):
[ 606.780774] sdb: detected capacity change from 8011120640 to 0
Try:
ubuntu@ubuntu:~$ ls /dev/sdb*
/dev/sdb
"sdb1" is missing! Usb stick is useless until plug it in again.
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-34-generic 3.2.0-34.53
ProcVersionSignature: Ubuntu 3.2.0-34.53-generic 3.2.33
Uname: Linux 3.2.0-34-generic x86_64
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
AplayDevices:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ApportVersion: 2.0.1-0ubuntu15
Architecture: amd64
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: ubuntu 3195 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xd4500000 irq 45'
Mixer name : 'Realtek ALC270'
Components : 'HDA:10ec0270,103c1605,00100100'
Controls : 18
Simple ctrls : 10
CasperVersion: 1.315
Date: Sun Nov 25 16:28:21 2012
LiveMediaBuild: Ubuntu 12.04.2 LTS "Precise Pangolin" - Release amd64 (20121125)
MachineType: Hewlett-Packard Presario CQ56 Notebook PC
MarkForUpload: True
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=(loop)/casper/vmlinuz iso-scan/filename=/precise-desktop-amd64.iso root=(hd0,2) boot=casper quiet splash
RelatedPackageVersions:
linux-restricted-modules-3.2.0-34-generic N/A
linux-backports-modules-3.2.0-34-generic N/A
linux-firmware 1.79.1
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/07/2011
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: F.15
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 1605
dmi.board.vendor: Hewlett-Packard
dmi.board.version: 90.17
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.chassis.version: N/A
dmi.modalias: dmi:bvnHewlett-Packard:bvrF.15:bd04/07/2011:svnHewlett-Packard:pnPresarioCQ56NotebookPC:pvr059D110000002810010000000:rvnHewlett-Packard:rn1605:rvr90.17:cvnHewlett-Packard:ct10:cvrN/A:
dmi.product.name: Presario CQ56 Notebook PC
dmi.product.version: 059D110000002810010000000
dmi.sys.vendor: Hewlett-Packard |
Reproduced this bug on "Daily Build" live cd:
http://cdimage.ubuntu.com/precise/daily/current/
Plug in the USB stick: (DMESG)
[ 354.732093] usb 2-1: new high-speed USB device number 3 using ehci_hcd
[ 354.907701] Initializing USB Mass Storage driver...
[ 354.907892] scsi6 : usb-storage 2-1:1.0
[ 354.908037] usbcore: registered new interface driver usb-storage
[ 354.908040] USB Mass Storage support registered.
[ 354.909714] usbcore: registered new interface driver uas
[ 355.929718] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 108 PMAP PQ: 0 ANSI: 0 CCS
[ 355.930970] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 356.706843] sd 6:0:0:0: [sdb] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 356.708571] sd 6:0:0:0: [sdb] Write Protect is off
[ 356.708577] sd 6:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 356.710320] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.710326] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.716318] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.716325] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.733983] sdb: sdb1
[ 356.739312] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.739317] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.739321] sd 6:0:0:0: [sdb] Attached SCSI removable disk
(System created sdb,sdb1 files, and mounted sdb1 filesystem correctly)
I click the "Eject" command on USB stick with the GUI.(I want only unmount the sdb1 filesystem)
Unexcepted message(DMESG):
[ 606.780774] sdb: detected capacity change from 8011120640 to 0
Try:
ubuntu@ubuntu:~$ ls /dev/sdb*
/dev/sdb
"sdb1" is missing! Usb stick is useless until plug it in again.
In the later attached eject.log shown(kern.log when eject the device):
[ 651.526383] usb-storage: Command TEST_UNIT_READY (6 bytes)
[ 651.526384] usb-storage: 00 00 00 00 00 00
[ 651.526390] usb-storage: Bulk Command S 0x43425355 T 0x2dd L 0 F 0 Trg 0 LUN 0 CL 6
[ 651.526392] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 651.526468] usb-storage: Status code 0; transferred 31/31
[ 651.526470] usb-storage: -- transfer complete
[ 651.526472] usb-storage: Bulk command transfer result=0
[ 651.526473] usb-storage: Attempting to get CSW...
[ 651.526475] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 651.526589] usb-storage: Status code 0; transferred 13/13
[ 651.526591] usb-storage: -- transfer complete
[ 651.526592] usb-storage: Bulk status result = 0
[ 651.526594] usb-storage: Bulk Status S 0x53425355 T 0x2dd R 0 Stat 0x1
[ 651.526596] usb-storage: -- transport indicates command failure
[ 651.526598] usb-storage: Issuing auto-REQUEST_SENSE
[ 651.526602] usb-storage: Bulk Command S 0x43425355 T 0x2de L 18 F 128 Trg 0 LUN 0 CL 6
[ 651.526604] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 651.526713] usb-storage: Status code 0; transferred 31/31
[ 651.526714] usb-storage: -- transfer complete
[ 651.526716] usb-storage: Bulk command transfer result=0
[ 651.526718] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[ 651.527088] usb-storage: Status code 0; transferred 18/18
[ 651.527091] usb-storage: -- transfer complete
[ 651.527092] usb-storage: Bulk data transfer result 0x0
[ 651.527094] usb-storage: Attempting to get CSW...
[ 651.527096] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 651.527224] usb-storage: Status code 0; transferred 13/13
[ 651.527226] usb-storage: -- transfer complete
[ 651.527228] usb-storage: Bulk status result = 0
[ 651.527230] usb-storage: Bulk Status S 0x53425355 T 0x2de R 0 Stat 0x0
[ 651.527233] usb-storage: -- Result from auto-sense is 0
[ 651.527235] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[ 651.527240] usb-storage: Not Ready: Medium not present
[ 651.527243] usb-storage: scsi cmd done, result=0x2
(This is the first "TEST_UNIT_READY" command fail, Nov 26 16:29:14)
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-34-generic 3.2.0-34.53
ProcVersionSignature: Ubuntu 3.2.0-34.53-generic 3.2.33
Uname: Linux 3.2.0-34-generic x86_64
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
AplayDevices:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ApportVersion: 2.0.1-0ubuntu15
Architecture: amd64
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: ubuntu 3195 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xd4500000 irq 45'
Mixer name : 'Realtek ALC270'
Components : 'HDA:10ec0270,103c1605,00100100'
Controls : 18
Simple ctrls : 10
CasperVersion: 1.315
Date: Sun Nov 25 16:28:21 2012
LiveMediaBuild: Ubuntu 12.04.2 LTS "Precise Pangolin" - Release amd64 (20121125)
MachineType: Hewlett-Packard Presario CQ56 Notebook PC
MarkForUpload: True
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=(loop)/casper/vmlinuz iso-scan/filename=/precise-desktop-amd64.iso root=(hd0,2) boot=casper quiet splash
RelatedPackageVersions:
linux-restricted-modules-3.2.0-34-generic N/A
linux-backports-modules-3.2.0-34-generic N/A
linux-firmware 1.79.1
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/07/2011
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: F.15
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 1605
dmi.board.vendor: Hewlett-Packard
dmi.board.version: 90.17
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.chassis.version: N/A
dmi.modalias: dmi:bvnHewlett-Packard:bvrF.15:bd04/07/2011:svnHewlett-Packard:pnPresarioCQ56NotebookPC:pvr059D110000002810010000000:rvnHewlett-Packard:rn1605:rvr90.17:cvnHewlett-Packard:ct10:cvrN/A:
dmi.product.name: Presario CQ56 Notebook PC
dmi.product.version: 059D110000002810010000000
dmi.sys.vendor: Hewlett-Packard |
|
| 2012-11-26 16:53:38 |
Endre Kollár |
summary |
Unexpected USB stick capacity change to 0 |
usb-storage: Not Ready: Medium not present |
|
| 2012-11-26 17:11:51 |
Joseph Salisbury |
linux (Ubuntu): importance |
Undecided |
Medium |
|
| 2012-11-26 17:11:52 |
Joseph Salisbury |
linux (Ubuntu): status |
Confirmed |
Incomplete |
|
| 2012-11-27 08:36:30 |
Endre Kollár |
tags |
amd64 apport-bug precise running-unity |
amd64 apport-bug kernel-bug-exists-upstream precise running-unity |
|
| 2012-11-27 08:38:42 |
Endre Kollár |
linux (Ubuntu): status |
Incomplete |
Confirmed |
|
| 2012-12-05 18:40:46 |
Endre Kollár |
attachment added |
|
udisks --monitor https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1082920/+attachment/3452414/+files/udisks.log |
|
| 2012-12-05 18:41:45 |
Endre Kollár |
attachment added |
|
gvfs-mount -oi https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1082920/+attachment/3452415/+files/gvfs-mount.log |
|
| 2012-12-05 18:43:08 |
Endre Kollár |
attachment added |
|
udevadm monitor https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1082920/+attachment/3452416/+files/udevadm.log |
|
| 2012-12-06 08:07:00 |
Endre Kollár |
description |
Reproduced this bug on "Daily Build" live cd:
http://cdimage.ubuntu.com/precise/daily/current/
Plug in the USB stick: (DMESG)
[ 354.732093] usb 2-1: new high-speed USB device number 3 using ehci_hcd
[ 354.907701] Initializing USB Mass Storage driver...
[ 354.907892] scsi6 : usb-storage 2-1:1.0
[ 354.908037] usbcore: registered new interface driver usb-storage
[ 354.908040] USB Mass Storage support registered.
[ 354.909714] usbcore: registered new interface driver uas
[ 355.929718] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 108 PMAP PQ: 0 ANSI: 0 CCS
[ 355.930970] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 356.706843] sd 6:0:0:0: [sdb] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 356.708571] sd 6:0:0:0: [sdb] Write Protect is off
[ 356.708577] sd 6:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 356.710320] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.710326] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.716318] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.716325] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.733983] sdb: sdb1
[ 356.739312] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.739317] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.739321] sd 6:0:0:0: [sdb] Attached SCSI removable disk
(System created sdb,sdb1 files, and mounted sdb1 filesystem correctly)
I click the "Eject" command on USB stick with the GUI.(I want only unmount the sdb1 filesystem)
Unexcepted message(DMESG):
[ 606.780774] sdb: detected capacity change from 8011120640 to 0
Try:
ubuntu@ubuntu:~$ ls /dev/sdb*
/dev/sdb
"sdb1" is missing! Usb stick is useless until plug it in again.
In the later attached eject.log shown(kern.log when eject the device):
[ 651.526383] usb-storage: Command TEST_UNIT_READY (6 bytes)
[ 651.526384] usb-storage: 00 00 00 00 00 00
[ 651.526390] usb-storage: Bulk Command S 0x43425355 T 0x2dd L 0 F 0 Trg 0 LUN 0 CL 6
[ 651.526392] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 651.526468] usb-storage: Status code 0; transferred 31/31
[ 651.526470] usb-storage: -- transfer complete
[ 651.526472] usb-storage: Bulk command transfer result=0
[ 651.526473] usb-storage: Attempting to get CSW...
[ 651.526475] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 651.526589] usb-storage: Status code 0; transferred 13/13
[ 651.526591] usb-storage: -- transfer complete
[ 651.526592] usb-storage: Bulk status result = 0
[ 651.526594] usb-storage: Bulk Status S 0x53425355 T 0x2dd R 0 Stat 0x1
[ 651.526596] usb-storage: -- transport indicates command failure
[ 651.526598] usb-storage: Issuing auto-REQUEST_SENSE
[ 651.526602] usb-storage: Bulk Command S 0x43425355 T 0x2de L 18 F 128 Trg 0 LUN 0 CL 6
[ 651.526604] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 651.526713] usb-storage: Status code 0; transferred 31/31
[ 651.526714] usb-storage: -- transfer complete
[ 651.526716] usb-storage: Bulk command transfer result=0
[ 651.526718] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[ 651.527088] usb-storage: Status code 0; transferred 18/18
[ 651.527091] usb-storage: -- transfer complete
[ 651.527092] usb-storage: Bulk data transfer result 0x0
[ 651.527094] usb-storage: Attempting to get CSW...
[ 651.527096] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 651.527224] usb-storage: Status code 0; transferred 13/13
[ 651.527226] usb-storage: -- transfer complete
[ 651.527228] usb-storage: Bulk status result = 0
[ 651.527230] usb-storage: Bulk Status S 0x53425355 T 0x2de R 0 Stat 0x0
[ 651.527233] usb-storage: -- Result from auto-sense is 0
[ 651.527235] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[ 651.527240] usb-storage: Not Ready: Medium not present
[ 651.527243] usb-storage: scsi cmd done, result=0x2
(This is the first "TEST_UNIT_READY" command fail, Nov 26 16:29:14)
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-34-generic 3.2.0-34.53
ProcVersionSignature: Ubuntu 3.2.0-34.53-generic 3.2.33
Uname: Linux 3.2.0-34-generic x86_64
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
AplayDevices:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ApportVersion: 2.0.1-0ubuntu15
Architecture: amd64
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: ubuntu 3195 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xd4500000 irq 45'
Mixer name : 'Realtek ALC270'
Components : 'HDA:10ec0270,103c1605,00100100'
Controls : 18
Simple ctrls : 10
CasperVersion: 1.315
Date: Sun Nov 25 16:28:21 2012
LiveMediaBuild: Ubuntu 12.04.2 LTS "Precise Pangolin" - Release amd64 (20121125)
MachineType: Hewlett-Packard Presario CQ56 Notebook PC
MarkForUpload: True
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=(loop)/casper/vmlinuz iso-scan/filename=/precise-desktop-amd64.iso root=(hd0,2) boot=casper quiet splash
RelatedPackageVersions:
linux-restricted-modules-3.2.0-34-generic N/A
linux-backports-modules-3.2.0-34-generic N/A
linux-firmware 1.79.1
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/07/2011
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: F.15
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 1605
dmi.board.vendor: Hewlett-Packard
dmi.board.version: 90.17
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.chassis.version: N/A
dmi.modalias: dmi:bvnHewlett-Packard:bvrF.15:bd04/07/2011:svnHewlett-Packard:pnPresarioCQ56NotebookPC:pvr059D110000002810010000000:rvnHewlett-Packard:rn1605:rvr90.17:cvnHewlett-Packard:ct10:cvrN/A:
dmi.product.name: Presario CQ56 Notebook PC
dmi.product.version: 059D110000002810010000000
dmi.sys.vendor: Hewlett-Packard |
Reproduced this bug on "Daily Build" live cd:
http://cdimage.ubuntu.com/precise/daily/current/
Plug in the USB stick: (DMESG)
[ 354.732093] usb 2-1: new high-speed USB device number 3 using ehci_hcd
[ 354.907701] Initializing USB Mass Storage driver...
[ 354.907892] scsi6 : usb-storage 2-1:1.0
[ 354.908037] usbcore: registered new interface driver usb-storage
[ 354.908040] USB Mass Storage support registered.
[ 354.909714] usbcore: registered new interface driver uas
[ 355.929718] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 108 PMAP PQ: 0 ANSI: 0 CCS
[ 355.930970] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 356.706843] sd 6:0:0:0: [sdb] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 356.708571] sd 6:0:0:0: [sdb] Write Protect is off
[ 356.708577] sd 6:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 356.710320] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.710326] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.716318] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.716325] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.733983] sdb: sdb1
[ 356.739312] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.739317] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.739321] sd 6:0:0:0: [sdb] Attached SCSI removable disk
(System created sdb,sdb1 files, and mounted sdb1 filesystem correctly)
ubuntu@ubuntu:~$ sudo eject /dev/sdb
Unexcepted message(DMESG):
[ 606.780774] sdb: detected capacity change from 8011120640 to 0
Try:
ubuntu@ubuntu:~$ ls /dev/sdb*
/dev/sdb
"sdb1" is missing! Usb stick is useless until plug it in again.
In the later attached eject.log shown(kern.log when eject the device):
[ 651.526383] usb-storage: Command TEST_UNIT_READY (6 bytes)
[ 651.526384] usb-storage: 00 00 00 00 00 00
[ 651.526390] usb-storage: Bulk Command S 0x43425355 T 0x2dd L 0 F 0 Trg 0 LUN 0 CL 6
[ 651.526392] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 651.526468] usb-storage: Status code 0; transferred 31/31
[ 651.526470] usb-storage: -- transfer complete
[ 651.526472] usb-storage: Bulk command transfer result=0
[ 651.526473] usb-storage: Attempting to get CSW...
[ 651.526475] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 651.526589] usb-storage: Status code 0; transferred 13/13
[ 651.526591] usb-storage: -- transfer complete
[ 651.526592] usb-storage: Bulk status result = 0
[ 651.526594] usb-storage: Bulk Status S 0x53425355 T 0x2dd R 0 Stat 0x1
[ 651.526596] usb-storage: -- transport indicates command failure
[ 651.526598] usb-storage: Issuing auto-REQUEST_SENSE
[ 651.526602] usb-storage: Bulk Command S 0x43425355 T 0x2de L 18 F 128 Trg 0 LUN 0 CL 6
[ 651.526604] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 651.526713] usb-storage: Status code 0; transferred 31/31
[ 651.526714] usb-storage: -- transfer complete
[ 651.526716] usb-storage: Bulk command transfer result=0
[ 651.526718] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[ 651.527088] usb-storage: Status code 0; transferred 18/18
[ 651.527091] usb-storage: -- transfer complete
[ 651.527092] usb-storage: Bulk data transfer result 0x0
[ 651.527094] usb-storage: Attempting to get CSW...
[ 651.527096] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 651.527224] usb-storage: Status code 0; transferred 13/13
[ 651.527226] usb-storage: -- transfer complete
[ 651.527228] usb-storage: Bulk status result = 0
[ 651.527230] usb-storage: Bulk Status S 0x53425355 T 0x2de R 0 Stat 0x0
[ 651.527233] usb-storage: -- Result from auto-sense is 0
[ 651.527235] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[ 651.527240] usb-storage: Not Ready: Medium not present
[ 651.527243] usb-storage: scsi cmd done, result=0x2
(This is the first "TEST_UNIT_READY" command fail, Nov 26 16:29:14)
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-34-generic 3.2.0-34.53
ProcVersionSignature: Ubuntu 3.2.0-34.53-generic 3.2.33
Uname: Linux 3.2.0-34-generic x86_64
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
AplayDevices:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ApportVersion: 2.0.1-0ubuntu15
Architecture: amd64
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: ubuntu 3195 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xd4500000 irq 45'
Mixer name : 'Realtek ALC270'
Components : 'HDA:10ec0270,103c1605,00100100'
Controls : 18
Simple ctrls : 10
CasperVersion: 1.315
Date: Sun Nov 25 16:28:21 2012
LiveMediaBuild: Ubuntu 12.04.2 LTS "Precise Pangolin" - Release amd64 (20121125)
MachineType: Hewlett-Packard Presario CQ56 Notebook PC
MarkForUpload: True
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=(loop)/casper/vmlinuz iso-scan/filename=/precise-desktop-amd64.iso root=(hd0,2) boot=casper quiet splash
RelatedPackageVersions:
linux-restricted-modules-3.2.0-34-generic N/A
linux-backports-modules-3.2.0-34-generic N/A
linux-firmware 1.79.1
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/07/2011
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: F.15
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 1605
dmi.board.vendor: Hewlett-Packard
dmi.board.version: 90.17
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.chassis.version: N/A
dmi.modalias: dmi:bvnHewlett-Packard:bvrF.15:bd04/07/2011:svnHewlett-Packard:pnPresarioCQ56NotebookPC:pvr059D110000002810010000000:rvnHewlett-Packard:rn1605:rvr90.17:cvnHewlett-Packard:ct10:cvrN/A:
dmi.product.name: Presario CQ56 Notebook PC
dmi.product.version: 059D110000002810010000000
dmi.sys.vendor: Hewlett-Packard |
|
| 2012-12-06 11:49:06 |
Endre Kollár |
description |
Reproduced this bug on "Daily Build" live cd:
http://cdimage.ubuntu.com/precise/daily/current/
Plug in the USB stick: (DMESG)
[ 354.732093] usb 2-1: new high-speed USB device number 3 using ehci_hcd
[ 354.907701] Initializing USB Mass Storage driver...
[ 354.907892] scsi6 : usb-storage 2-1:1.0
[ 354.908037] usbcore: registered new interface driver usb-storage
[ 354.908040] USB Mass Storage support registered.
[ 354.909714] usbcore: registered new interface driver uas
[ 355.929718] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 108 PMAP PQ: 0 ANSI: 0 CCS
[ 355.930970] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 356.706843] sd 6:0:0:0: [sdb] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 356.708571] sd 6:0:0:0: [sdb] Write Protect is off
[ 356.708577] sd 6:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 356.710320] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.710326] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.716318] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.716325] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.733983] sdb: sdb1
[ 356.739312] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.739317] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.739321] sd 6:0:0:0: [sdb] Attached SCSI removable disk
(System created sdb,sdb1 files, and mounted sdb1 filesystem correctly)
ubuntu@ubuntu:~$ sudo eject /dev/sdb
Unexcepted message(DMESG):
[ 606.780774] sdb: detected capacity change from 8011120640 to 0
Try:
ubuntu@ubuntu:~$ ls /dev/sdb*
/dev/sdb
"sdb1" is missing! Usb stick is useless until plug it in again.
In the later attached eject.log shown(kern.log when eject the device):
[ 651.526383] usb-storage: Command TEST_UNIT_READY (6 bytes)
[ 651.526384] usb-storage: 00 00 00 00 00 00
[ 651.526390] usb-storage: Bulk Command S 0x43425355 T 0x2dd L 0 F 0 Trg 0 LUN 0 CL 6
[ 651.526392] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 651.526468] usb-storage: Status code 0; transferred 31/31
[ 651.526470] usb-storage: -- transfer complete
[ 651.526472] usb-storage: Bulk command transfer result=0
[ 651.526473] usb-storage: Attempting to get CSW...
[ 651.526475] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 651.526589] usb-storage: Status code 0; transferred 13/13
[ 651.526591] usb-storage: -- transfer complete
[ 651.526592] usb-storage: Bulk status result = 0
[ 651.526594] usb-storage: Bulk Status S 0x53425355 T 0x2dd R 0 Stat 0x1
[ 651.526596] usb-storage: -- transport indicates command failure
[ 651.526598] usb-storage: Issuing auto-REQUEST_SENSE
[ 651.526602] usb-storage: Bulk Command S 0x43425355 T 0x2de L 18 F 128 Trg 0 LUN 0 CL 6
[ 651.526604] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 651.526713] usb-storage: Status code 0; transferred 31/31
[ 651.526714] usb-storage: -- transfer complete
[ 651.526716] usb-storage: Bulk command transfer result=0
[ 651.526718] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[ 651.527088] usb-storage: Status code 0; transferred 18/18
[ 651.527091] usb-storage: -- transfer complete
[ 651.527092] usb-storage: Bulk data transfer result 0x0
[ 651.527094] usb-storage: Attempting to get CSW...
[ 651.527096] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 651.527224] usb-storage: Status code 0; transferred 13/13
[ 651.527226] usb-storage: -- transfer complete
[ 651.527228] usb-storage: Bulk status result = 0
[ 651.527230] usb-storage: Bulk Status S 0x53425355 T 0x2de R 0 Stat 0x0
[ 651.527233] usb-storage: -- Result from auto-sense is 0
[ 651.527235] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[ 651.527240] usb-storage: Not Ready: Medium not present
[ 651.527243] usb-storage: scsi cmd done, result=0x2
(This is the first "TEST_UNIT_READY" command fail, Nov 26 16:29:14)
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-34-generic 3.2.0-34.53
ProcVersionSignature: Ubuntu 3.2.0-34.53-generic 3.2.33
Uname: Linux 3.2.0-34-generic x86_64
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
AplayDevices:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ApportVersion: 2.0.1-0ubuntu15
Architecture: amd64
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: ubuntu 3195 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xd4500000 irq 45'
Mixer name : 'Realtek ALC270'
Components : 'HDA:10ec0270,103c1605,00100100'
Controls : 18
Simple ctrls : 10
CasperVersion: 1.315
Date: Sun Nov 25 16:28:21 2012
LiveMediaBuild: Ubuntu 12.04.2 LTS "Precise Pangolin" - Release amd64 (20121125)
MachineType: Hewlett-Packard Presario CQ56 Notebook PC
MarkForUpload: True
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=(loop)/casper/vmlinuz iso-scan/filename=/precise-desktop-amd64.iso root=(hd0,2) boot=casper quiet splash
RelatedPackageVersions:
linux-restricted-modules-3.2.0-34-generic N/A
linux-backports-modules-3.2.0-34-generic N/A
linux-firmware 1.79.1
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/07/2011
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: F.15
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 1605
dmi.board.vendor: Hewlett-Packard
dmi.board.version: 90.17
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.chassis.version: N/A
dmi.modalias: dmi:bvnHewlett-Packard:bvrF.15:bd04/07/2011:svnHewlett-Packard:pnPresarioCQ56NotebookPC:pvr059D110000002810010000000:rvnHewlett-Packard:rn1605:rvr90.17:cvnHewlett-Packard:ct10:cvrN/A:
dmi.product.name: Presario CQ56 Notebook PC
dmi.product.version: 059D110000002810010000000
dmi.sys.vendor: Hewlett-Packard |
Reproduced this bug on "Daily Build" live cd:
http://cdimage.ubuntu.com/precise/daily/current/
and with the:
http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.7-rc6-raring/
kernel.
Plug in the USB stick: (DMESG)
[ 354.732093] usb 2-1: new high-speed USB device number 3 using ehci_hcd
[ 354.907701] Initializing USB Mass Storage driver...
[ 354.907892] scsi6 : usb-storage 2-1:1.0
[ 354.908037] usbcore: registered new interface driver usb-storage
[ 354.908040] USB Mass Storage support registered.
[ 354.909714] usbcore: registered new interface driver uas
[ 355.929718] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 108 PMAP PQ: 0 ANSI: 0 CCS
[ 355.930970] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 356.706843] sd 6:0:0:0: [sdb] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 356.708571] sd 6:0:0:0: [sdb] Write Protect is off
[ 356.708577] sd 6:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 356.710320] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.710326] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.716318] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.716325] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.733983] sdb: sdb1
[ 356.739312] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.739317] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.739321] sd 6:0:0:0: [sdb] Attached SCSI removable disk
(System created sdb,sdb1 files, and mounted sdb1 filesystem correctly)
ubuntu@ubuntu:~$ sudo eject /dev/sdb
Unexcepted message(DMESG):
[ 606.780774] sdb: detected capacity change from 8011120640 to 0
Try:
ubuntu@ubuntu:~$ ls /dev/sdb*
/dev/sdb
"sdb1" is missing! Usb stick is useless until plug it in again.
In the later attached eject.log shown(kern.log when eject the device):
[ 651.526383] usb-storage: Command TEST_UNIT_READY (6 bytes)
[ 651.526384] usb-storage: 00 00 00 00 00 00
[ 651.526390] usb-storage: Bulk Command S 0x43425355 T 0x2dd L 0 F 0 Trg 0 LUN 0 CL 6
[ 651.526392] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 651.526468] usb-storage: Status code 0; transferred 31/31
[ 651.526470] usb-storage: -- transfer complete
[ 651.526472] usb-storage: Bulk command transfer result=0
[ 651.526473] usb-storage: Attempting to get CSW...
[ 651.526475] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 651.526589] usb-storage: Status code 0; transferred 13/13
[ 651.526591] usb-storage: -- transfer complete
[ 651.526592] usb-storage: Bulk status result = 0
[ 651.526594] usb-storage: Bulk Status S 0x53425355 T 0x2dd R 0 Stat 0x1
[ 651.526596] usb-storage: -- transport indicates command failure
[ 651.526598] usb-storage: Issuing auto-REQUEST_SENSE
[ 651.526602] usb-storage: Bulk Command S 0x43425355 T 0x2de L 18 F 128 Trg 0 LUN 0 CL 6
[ 651.526604] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 651.526713] usb-storage: Status code 0; transferred 31/31
[ 651.526714] usb-storage: -- transfer complete
[ 651.526716] usb-storage: Bulk command transfer result=0
[ 651.526718] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[ 651.527088] usb-storage: Status code 0; transferred 18/18
[ 651.527091] usb-storage: -- transfer complete
[ 651.527092] usb-storage: Bulk data transfer result 0x0
[ 651.527094] usb-storage: Attempting to get CSW...
[ 651.527096] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 651.527224] usb-storage: Status code 0; transferred 13/13
[ 651.527226] usb-storage: -- transfer complete
[ 651.527228] usb-storage: Bulk status result = 0
[ 651.527230] usb-storage: Bulk Status S 0x53425355 T 0x2de R 0 Stat 0x0
[ 651.527233] usb-storage: -- Result from auto-sense is 0
[ 651.527235] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[ 651.527240] usb-storage: Not Ready: Medium not present
[ 651.527243] usb-storage: scsi cmd done, result=0x2
(This is the first "TEST_UNIT_READY" command fail, Nov 26 16:29:14)
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-34-generic 3.2.0-34.53
ProcVersionSignature: Ubuntu 3.2.0-34.53-generic 3.2.33
Uname: Linux 3.2.0-34-generic x86_64
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
AplayDevices:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ApportVersion: 2.0.1-0ubuntu15
Architecture: amd64
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: ubuntu 3195 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xd4500000 irq 45'
Mixer name : 'Realtek ALC270'
Components : 'HDA:10ec0270,103c1605,00100100'
Controls : 18
Simple ctrls : 10
CasperVersion: 1.315
Date: Sun Nov 25 16:28:21 2012
LiveMediaBuild: Ubuntu 12.04.2 LTS "Precise Pangolin" - Release amd64 (20121125)
MachineType: Hewlett-Packard Presario CQ56 Notebook PC
MarkForUpload: True
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=(loop)/casper/vmlinuz iso-scan/filename=/precise-desktop-amd64.iso root=(hd0,2) boot=casper quiet splash
RelatedPackageVersions:
linux-restricted-modules-3.2.0-34-generic N/A
linux-backports-modules-3.2.0-34-generic N/A
linux-firmware 1.79.1
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/07/2011
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: F.15
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 1605
dmi.board.vendor: Hewlett-Packard
dmi.board.version: 90.17
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.chassis.version: N/A
dmi.modalias: dmi:bvnHewlett-Packard:bvrF.15:bd04/07/2011:svnHewlett-Packard:pnPresarioCQ56NotebookPC:pvr059D110000002810010000000:rvnHewlett-Packard:rn1605:rvr90.17:cvnHewlett-Packard:ct10:cvrN/A:
dmi.product.name: Presario CQ56 Notebook PC
dmi.product.version: 059D110000002810010000000
dmi.sys.vendor: Hewlett-Packard |
|
| 2012-12-06 14:00:16 |
Endre Kollár |
summary |
usb-storage: Not Ready: Medium not present |
usb-storage: Not Ready: Medium not present after scsi eject command |
|
| 2012-12-14 11:26:15 |
Endre Kollár |
bug task added |
|
linux |
|
| 2012-12-14 11:28:22 |
Endre Kollár |
bug task added |
|
udisks |
|
| 2012-12-14 11:36:42 |
Endre Kollár |
affects |
udisks |
udisks (Ubuntu) |
|
| 2012-12-14 13:08:19 |
Endre Kollár |
description |
Reproduced this bug on "Daily Build" live cd:
http://cdimage.ubuntu.com/precise/daily/current/
and with the:
http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.7-rc6-raring/
kernel.
Plug in the USB stick: (DMESG)
[ 354.732093] usb 2-1: new high-speed USB device number 3 using ehci_hcd
[ 354.907701] Initializing USB Mass Storage driver...
[ 354.907892] scsi6 : usb-storage 2-1:1.0
[ 354.908037] usbcore: registered new interface driver usb-storage
[ 354.908040] USB Mass Storage support registered.
[ 354.909714] usbcore: registered new interface driver uas
[ 355.929718] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 108 PMAP PQ: 0 ANSI: 0 CCS
[ 355.930970] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 356.706843] sd 6:0:0:0: [sdb] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 356.708571] sd 6:0:0:0: [sdb] Write Protect is off
[ 356.708577] sd 6:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 356.710320] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.710326] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.716318] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.716325] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.733983] sdb: sdb1
[ 356.739312] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.739317] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.739321] sd 6:0:0:0: [sdb] Attached SCSI removable disk
(System created sdb,sdb1 files, and mounted sdb1 filesystem correctly)
ubuntu@ubuntu:~$ sudo eject /dev/sdb
Unexcepted message(DMESG):
[ 606.780774] sdb: detected capacity change from 8011120640 to 0
Try:
ubuntu@ubuntu:~$ ls /dev/sdb*
/dev/sdb
"sdb1" is missing! Usb stick is useless until plug it in again.
In the later attached eject.log shown(kern.log when eject the device):
[ 651.526383] usb-storage: Command TEST_UNIT_READY (6 bytes)
[ 651.526384] usb-storage: 00 00 00 00 00 00
[ 651.526390] usb-storage: Bulk Command S 0x43425355 T 0x2dd L 0 F 0 Trg 0 LUN 0 CL 6
[ 651.526392] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 651.526468] usb-storage: Status code 0; transferred 31/31
[ 651.526470] usb-storage: -- transfer complete
[ 651.526472] usb-storage: Bulk command transfer result=0
[ 651.526473] usb-storage: Attempting to get CSW...
[ 651.526475] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 651.526589] usb-storage: Status code 0; transferred 13/13
[ 651.526591] usb-storage: -- transfer complete
[ 651.526592] usb-storage: Bulk status result = 0
[ 651.526594] usb-storage: Bulk Status S 0x53425355 T 0x2dd R 0 Stat 0x1
[ 651.526596] usb-storage: -- transport indicates command failure
[ 651.526598] usb-storage: Issuing auto-REQUEST_SENSE
[ 651.526602] usb-storage: Bulk Command S 0x43425355 T 0x2de L 18 F 128 Trg 0 LUN 0 CL 6
[ 651.526604] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 651.526713] usb-storage: Status code 0; transferred 31/31
[ 651.526714] usb-storage: -- transfer complete
[ 651.526716] usb-storage: Bulk command transfer result=0
[ 651.526718] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[ 651.527088] usb-storage: Status code 0; transferred 18/18
[ 651.527091] usb-storage: -- transfer complete
[ 651.527092] usb-storage: Bulk data transfer result 0x0
[ 651.527094] usb-storage: Attempting to get CSW...
[ 651.527096] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 651.527224] usb-storage: Status code 0; transferred 13/13
[ 651.527226] usb-storage: -- transfer complete
[ 651.527228] usb-storage: Bulk status result = 0
[ 651.527230] usb-storage: Bulk Status S 0x53425355 T 0x2de R 0 Stat 0x0
[ 651.527233] usb-storage: -- Result from auto-sense is 0
[ 651.527235] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[ 651.527240] usb-storage: Not Ready: Medium not present
[ 651.527243] usb-storage: scsi cmd done, result=0x2
(This is the first "TEST_UNIT_READY" command fail, Nov 26 16:29:14)
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-34-generic 3.2.0-34.53
ProcVersionSignature: Ubuntu 3.2.0-34.53-generic 3.2.33
Uname: Linux 3.2.0-34-generic x86_64
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
AplayDevices:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ApportVersion: 2.0.1-0ubuntu15
Architecture: amd64
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: ubuntu 3195 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xd4500000 irq 45'
Mixer name : 'Realtek ALC270'
Components : 'HDA:10ec0270,103c1605,00100100'
Controls : 18
Simple ctrls : 10
CasperVersion: 1.315
Date: Sun Nov 25 16:28:21 2012
LiveMediaBuild: Ubuntu 12.04.2 LTS "Precise Pangolin" - Release amd64 (20121125)
MachineType: Hewlett-Packard Presario CQ56 Notebook PC
MarkForUpload: True
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=(loop)/casper/vmlinuz iso-scan/filename=/precise-desktop-amd64.iso root=(hd0,2) boot=casper quiet splash
RelatedPackageVersions:
linux-restricted-modules-3.2.0-34-generic N/A
linux-backports-modules-3.2.0-34-generic N/A
linux-firmware 1.79.1
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/07/2011
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: F.15
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 1605
dmi.board.vendor: Hewlett-Packard
dmi.board.version: 90.17
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.chassis.version: N/A
dmi.modalias: dmi:bvnHewlett-Packard:bvrF.15:bd04/07/2011:svnHewlett-Packard:pnPresarioCQ56NotebookPC:pvr059D110000002810010000000:rvnHewlett-Packard:rn1605:rvr90.17:cvnHewlett-Packard:ct10:cvrN/A:
dmi.product.name: Presario CQ56 Notebook PC
dmi.product.version: 059D110000002810010000000
dmi.sys.vendor: Hewlett-Packard |
Reproduced this bug on "Daily Build" live cd:
http://cdimage.ubuntu.com/precise/daily/current/
and with the:
http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.7-rc6-raring/
kernel.
Plug in the USB stick: (DMESG)
[ 354.732093] usb 2-1: new high-speed USB device number 3 using ehci_hcd
[ 354.907701] Initializing USB Mass Storage driver...
[ 354.907892] scsi6 : usb-storage 2-1:1.0
[ 354.908037] usbcore: registered new interface driver usb-storage
[ 354.908040] USB Mass Storage support registered.
[ 354.909714] usbcore: registered new interface driver uas
[ 355.929718] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 108 PMAP PQ: 0 ANSI: 0 CCS
[ 355.930970] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 356.706843] sd 6:0:0:0: [sdb] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 356.708571] sd 6:0:0:0: [sdb] Write Protect is off
[ 356.708577] sd 6:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 356.710320] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.710326] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.716318] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.716325] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.733983] sdb: sdb1
[ 356.739312] sd 6:0:0:0: [sdb] No Caching mode page present
[ 356.739317] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 356.739321] sd 6:0:0:0: [sdb] Attached SCSI removable disk
(System created sdb,sdb1 files, and mounted sdb1 filesystem correctly)
ubuntu@ubuntu:~$ sudo eject /dev/sdb
Unexcepted message(DMESG):
[ 606.780774] sdb: detected capacity change from 8011120640 to 0
Try:
ubuntu@ubuntu:~$ ls /dev/sdb*
/dev/sdb
"sdb1" is missing! Usb stick is useless until plug it in again.
In the later attached eject.log shown(kern.log when eject the device):
[ 651.526383] usb-storage: Command TEST_UNIT_READY (6 bytes)
[ 651.526384] usb-storage: 00 00 00 00 00 00
[ 651.526390] usb-storage: Bulk Command S 0x43425355 T 0x2dd L 0 F 0 Trg 0 LUN 0 CL 6
[ 651.526392] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 651.526468] usb-storage: Status code 0; transferred 31/31
[ 651.526470] usb-storage: -- transfer complete
[ 651.526472] usb-storage: Bulk command transfer result=0
[ 651.526473] usb-storage: Attempting to get CSW...
[ 651.526475] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 651.526589] usb-storage: Status code 0; transferred 13/13
[ 651.526591] usb-storage: -- transfer complete
[ 651.526592] usb-storage: Bulk status result = 0
[ 651.526594] usb-storage: Bulk Status S 0x53425355 T 0x2dd R 0 Stat 0x1
[ 651.526596] usb-storage: -- transport indicates command failure
[ 651.526598] usb-storage: Issuing auto-REQUEST_SENSE
[ 651.526602] usb-storage: Bulk Command S 0x43425355 T 0x2de L 18 F 128 Trg 0 LUN 0 CL 6
[ 651.526604] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 651.526713] usb-storage: Status code 0; transferred 31/31
[ 651.526714] usb-storage: -- transfer complete
[ 651.526716] usb-storage: Bulk command transfer result=0
[ 651.526718] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[ 651.527088] usb-storage: Status code 0; transferred 18/18
[ 651.527091] usb-storage: -- transfer complete
[ 651.527092] usb-storage: Bulk data transfer result 0x0
[ 651.527094] usb-storage: Attempting to get CSW...
[ 651.527096] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 651.527224] usb-storage: Status code 0; transferred 13/13
[ 651.527226] usb-storage: -- transfer complete
[ 651.527228] usb-storage: Bulk status result = 0
[ 651.527230] usb-storage: Bulk Status S 0x53425355 T 0x2de R 0 Stat 0x0
[ 651.527233] usb-storage: -- Result from auto-sense is 0
[ 651.527235] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[ 651.527240] usb-storage: Not Ready: Medium not present
[ 651.527243] usb-storage: scsi cmd done, result=0x2
(This is the first "TEST_UNIT_READY" command fail, Nov 26 16:29:14)
Why affects linux?
Transmit "eject command" to the device.
Why affects udisks?
Set can_eject not correctly.
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-34-generic 3.2.0-34.53
ProcVersionSignature: Ubuntu 3.2.0-34.53-generic 3.2.33
Uname: Linux 3.2.0-34-generic x86_64
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
AplayDevices:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ApportVersion: 2.0.1-0ubuntu15
Architecture: amd64
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: ubuntu 3195 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xd4500000 irq 45'
Mixer name : 'Realtek ALC270'
Components : 'HDA:10ec0270,103c1605,00100100'
Controls : 18
Simple ctrls : 10
CasperVersion: 1.315
Date: Sun Nov 25 16:28:21 2012
LiveMediaBuild: Ubuntu 12.04.2 LTS "Precise Pangolin" - Release amd64 (20121125)
MachineType: Hewlett-Packard Presario CQ56 Notebook PC
MarkForUpload: True
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=(loop)/casper/vmlinuz iso-scan/filename=/precise-desktop-amd64.iso root=(hd0,2) boot=casper quiet splash
RelatedPackageVersions:
linux-restricted-modules-3.2.0-34-generic N/A
linux-backports-modules-3.2.0-34-generic N/A
linux-firmware 1.79.1
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/07/2011
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: F.15
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 1605
dmi.board.vendor: Hewlett-Packard
dmi.board.version: 90.17
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.chassis.version: N/A
dmi.modalias: dmi:bvnHewlett-Packard:bvrF.15:bd04/07/2011:svnHewlett-Packard:pnPresarioCQ56NotebookPC:pvr059D110000002810010000000:rvnHewlett-Packard:rn1605:rvr90.17:cvnHewlett-Packard:ct10:cvrN/A:
dmi.product.name: Presario CQ56 Notebook PC
dmi.product.version: 059D110000002810010000000
dmi.sys.vendor: Hewlett-Packard |
|
| 2012-12-14 13:21:15 |
Launchpad Janitor |
udisks (Ubuntu): status |
New |
Confirmed |
|
| 2013-08-10 10:48:28 |
penalvch |
tags |
amd64 apport-bug kernel-bug-exists-upstream precise running-unity |
amd64 apport-bug kernel-bug-exists-upstream needs-full-computer-model needs-upstream-testing precise regression-potential running-unity |
|
| 2013-08-10 10:49:56 |
penalvch |
linux (Ubuntu): status |
Confirmed |
Incomplete |
|
| 2014-10-03 21:03:34 |
George Politis |
bug |
|
|
added subscriber George Politis |
