[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=02a2dcb9-c893-49e3-8f51-a937a4ef3fbb ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cff90000-0x00000000cff9dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cff9e000-0x00000000cffdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cffedfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cfff0000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7501/K9A2VM (MS-7501), BIOS V1.12 08/24/2010 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xcff8ffff] [ 0.000000] [mem 0x00000000-0xcfdfffff] page 2M [ 0.000000] [mem 0xcfe00000-0xcff8ffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xcff8ffff @ [mem 0x1fffa000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x12fffffff] [ 0.000000] [mem 0x100000000-0x12fffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x12fffffff @ [mem 0xcff8a000-0xcff8ffff] [ 0.000000] RAMDISK: [mem 0x362e6000-0x3716afff] [ 0.000000] ACPI: RSDP 00000000000fac60 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cff90000 00044 (v01 082410 RSDT1301 20100824 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff90200 00084 (v02 082410 FACP1301 20100824 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cff904c0 057BD (v01 1ADWY 1ADWY001 00000001 INTL 20051117) [ 0.000000] ACPI: FACS 00000000cff9e000 00040 [ 0.000000] ACPI: APIC 00000000cff90390 0007C (v01 082410 APIC1301 20100824 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 082410 OEMMCFG 20100824 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000cff90450 00068 (v01 082410 OEMSRAT 20100824 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cff9e040 00071 (v01 082410 OEMB1301 20100824 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000cff95c80 000C8 (v03 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 00000000cff95d50 00038 (v01 082410 OEMHPET 20100824 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cff95d90 0028A (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at /build/buildd/linux-3.5.0/arch/x86/mm/numa.c:499 numa_init+0xe5/0x476() [ 0.000000] Hardware name: MS-7501 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 3.5.0-17-generic #28-Ubuntu [ 0.000000] Call Trace: [ 0.000000] [] warn_slowpath_common+0x7f/0xc0 [ 0.000000] [] warn_slowpath_null+0x1a/0x20 [ 0.000000] [] numa_init+0xe5/0x476 [ 0.000000] [] ? flat_get_apic_id+0x9/0x20 [ 0.000000] [] x86_numa_init+0x27/0x3d [ 0.000000] [] initmem_init+0x9/0xb [ 0.000000] [] setup_arch+0xa5d/0xb63 [ 0.000000] [] ? printk+0x61/0x63 [ 0.000000] [] start_kernel+0xd4/0x3c4 [ 0.000000] [] x86_64_start_reservations+0x131/0x135 [ 0.000000] [] x86_64_start_kernel+0x100/0x10f [ 0.000000] ---[ end trace af749076dcd9adc6 ]--- [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff] [ 0.000000] NODE_DATA [mem 0x12fffc000-0x12fffffff] [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x12fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xcff8ffff] [ 0.000000] node 0: [mem 0x100000000-0x12fffffff] [ 0.000000] On node 0 totalpages: 1048351 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 831440 pages, LIFO batch:31 [ 0.000000] Normal zone: 3072 pages used for memmap [ 0.000000] Normal zone: 193536 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 6 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cff9e000 [ 0.000000] PM: Registered nosave memory: 00000000cff9e000 - 00000000cffe0000 [ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000cffee000 [ 0.000000] PM: Registered nosave memory: 00000000cffee000 - 00000000cfff0000 [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] e820: [mem 0xd0000000-0xffefffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83584 r8192 d22912 u262144 [ 0.000000] pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028889 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=02a2dcb9-c893-49e3-8f51-a937a4ef3fbb ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 460a000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000 [ 0.000000] Memory: 3964884k/4980736k available (6711k kernel code, 787332k absent, 228520k reserved, 6459k data, 928k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:728 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2594.263 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.52 BogoMIPS (lpj=10377052) [ 0.008010] pid_max: default: 32768 minimum: 301 [ 0.008038] Security Framework initialized [ 0.008053] AppArmor: AppArmor initialized [ 0.008055] Yama: becoming mindful. [ 0.008400] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.013153] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.014274] Mount-cache hash table entries: 256 [ 0.014490] Initializing cgroup subsys cpuacct [ 0.014492] Initializing cgroup subsys memory [ 0.014503] Initializing cgroup subsys devices [ 0.014505] Initializing cgroup subsys freezer [ 0.014507] Initializing cgroup subsys blkio [ 0.014508] Initializing cgroup subsys perf_event [ 0.014536] tseg: 0000000000 [ 0.014550] CPU: Physical Processor ID: 0 [ 0.014551] CPU: Processor Core ID: 0 [ 0.014552] mce: CPU supports 5 MCE banks [ 0.014560] LVT offset 0 assigned for vector 0xf9 [ 0.014564] using AMD E400 aware idle routine [ 0.016054] ACPI: Core revision 20120320 [ 0.019211] ftrace: allocating 25118 entries in 99 pages [ 0.028468] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.071376] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 01 [ 0.072003] Performance Events: AMD PMU driver. [ 0.072003] ... version: 0 [ 0.072003] ... bit width: 48 [ 0.072003] ... generic registers: 4 [ 0.072003] ... value mask: 0000ffffffffffff [ 0.072003] ... max period: 00007fffffffffff [ 0.072003] ... fixed-purpose events: 0 [ 0.072003] ... event mask: 000000000000000f [ 0.072003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.072003] Booting Node 0, Processors #1 [ 0.156079] Brought up 2 CPUs [ 0.156082] Total of 2 processors activated (10377.15 BogoMIPS). [ 0.156546] devtmpfs: initialized [ 0.157725] EVM: security.selinux [ 0.157726] EVM: security.SMACK64 [ 0.157728] EVM: security.capability [ 0.157743] PM: Registering ACPI NVS region [mem 0xcff9e000-0xcffdffff] (270336 bytes) [ 0.157743] dummy: [ 0.157743] RTC time: 20:13:21, date: 10/24/12 [ 0.157743] NET: Registered protocol family 16 [ 0.157743] Trying to unpack rootfs image as initramfs... [ 0.157743] node 0 link 0: io port [1000, ffffff] [ 0.157743] TOM: 00000000d0000000 aka 3328M [ 0.157743] node 0 link 0: mmio [a0000, bffff] [ 0.157743] node 0 link 0: mmio [d0000000, dfffffff] [ 0.157743] node 0 link 0: mmio [e0000000, efffffff] [ 0.157743] node 0 link 0: mmio [f0000000, ffefffff] [ 0.157743] TOM2: 0000000130000000 aka 4864M [ 0.157743] bus: [00, 07] on node 0 link 0 [ 0.157743] bus: 00 [io 0x0000-0xffff] [ 0.157743] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.157743] bus: 00 [mem 0xd0000000-0xffffffff] [ 0.157743] bus: 00 [mem 0x130000000-0xfcffffffff] [ 0.157743] ACPI: bus type pci registered [ 0.157743] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.157743] PCI: not using MMCONFIG [ 0.157743] PCI: Using configuration type 1 for base access [ 0.157743] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.157743] mtrr: probably your BIOS does not setup all CPUs. [ 0.157743] mtrr: corrected configuration. [ 0.160775] bio: create slab at 0 [ 0.160875] ACPI: Added _OSI(Module Device) [ 0.160876] ACPI: Added _OSI(Processor Device) [ 0.160878] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.160879] ACPI: Added _OSI(Processor Aggregator Device) [ 0.161499] ACPI: EC: Detected MSI hardware, enabling workarounds. [ 0.161502] ACPI: EC: Look up EC in DSDT [ 0.162839] ACPI: Executed 4 blocks of module-level executable AML code [ 0.180481] ACPI: Interpreter enabled [ 0.180487] ACPI: (supports S0 S1 S4 S5) [ 0.180505] ACPI: Using IOAPIC for interrupt routing [ 0.180526] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.181571] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.400928] ACPI: No dock devices found. [ 0.400936] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.401023] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.401169] pci_root PNP0A03:00: >host bridge window [io 0x0000-0x0cf7] [ 0.401171] pci_root PNP0A03:00: >host bridge window [io 0x0d00-0xffff] [ 0.401173] pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff] [ 0.401175] pci_root PNP0A03:00: >host bridge window [mem 0x000d0000-0x000dffff] [ 0.401177] pci_root PNP0A03:00: >host bridge window [mem 0xd0000000-0xdfffffff] [ 0.401179] pci_root PNP0A03:00: >host bridge window [mem 0xf0000000-0xfed44fff] [ 0.401217] PCI host bridge to bus 0000:00 [ 0.401220] pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7] [ 0.401222] pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff] [ 0.401225] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff] [ 0.401227] pci_bus 0000:00: >root bus resource [mem 0x000d0000-0x000dffff] [ 0.401229] pci_bus 0000:00: >root bus resource [mem 0xd0000000-0xdfffffff] [ 0.401231] pci_bus 0000:00: >root bus resource [mem 0xf0000000-0xfed44fff] [ 0.401245] pci 0000:00:00.0: >[1022:9600] type 00 class 0x060000 [ 0.401311] pci 0000:00:02.0: >[1022:9603] type 01 class 0x060400 [ 0.401351] pci 0000:00:02.0: >PME# supported from D0 D3hot D3cold [ 0.401373] pci 0000:00:04.0: >[1022:9604] type 01 class 0x060400 [ 0.401411] pci 0000:00:04.0: >PME# supported from D0 D3hot D3cold [ 0.401428] pci 0000:00:05.0: >[1022:9605] type 01 class 0x060400 [ 0.401466] pci 0000:00:05.0: >PME# supported from D0 D3hot D3cold [ 0.401512] pci 0000:00:11.0: >[1002:4390] type 00 class 0x01018f [ 0.401533] pci 0000:00:11.0: >reg 10: [io 0xb000-0xb007] [ 0.401544] pci 0000:00:11.0: >reg 14: [io 0xa000-0xa003] [ 0.401554] pci 0000:00:11.0: >reg 18: [io 0x9000-0x9007] [ 0.401565] pci 0000:00:11.0: >reg 1c: [io 0x8000-0x8003] [ 0.401575] pci 0000:00:11.0: >reg 20: [io 0x7000-0x700f] [ 0.401586] pci 0000:00:11.0: >reg 24: [mem 0xfe7ff800-0xfe7ffbff] [ 0.401609] pci 0000:00:11.0: >set SATA to AHCI mode [ 0.401661] pci 0000:00:12.0: >[1002:4397] type 00 class 0x0c0310 [ 0.401675] pci 0000:00:12.0: >reg 10: [mem 0xfe7fd000-0xfe7fdfff] [ 0.401747] pci 0000:00:12.1: >[1002:4398] type 00 class 0x0c0310 [ 0.401762] pci 0000:00:12.1: >reg 10: [mem 0xfe7fe000-0xfe7fefff] [ 0.401839] pci 0000:00:12.2: >[1002:4396] type 00 class 0x0c0320 [ 0.401859] pci 0000:00:12.2: >reg 10: [mem 0xfe7ff000-0xfe7ff0ff] [ 0.401949] pci 0000:00:12.2: >supports D1 D2 [ 0.401951] pci 0000:00:12.2: >PME# supported from D0 D1 D2 D3hot [ 0.401978] pci 0000:00:13.0: >[1002:4397] type 00 class 0x0c0310 [ 0.401992] pci 0000:00:13.0: >reg 10: [mem 0xfe7fa000-0xfe7fafff] [ 0.402064] pci 0000:00:13.1: >[1002:4398] type 00 class 0x0c0310 [ 0.402079] pci 0000:00:13.1: >reg 10: [mem 0xfe7fb000-0xfe7fbfff] [ 0.402157] pci 0000:00:13.2: >[1002:4396] type 00 class 0x0c0320 [ 0.402177] pci 0000:00:13.2: >reg 10: [mem 0xfe7fc800-0xfe7fc8ff] [ 0.402267] pci 0000:00:13.2: >supports D1 D2 [ 0.402269] pci 0000:00:13.2: >PME# supported from D0 D1 D2 D3hot [ 0.402299] pci 0000:00:14.0: >[1002:4385] type 00 class 0x0c0500 [ 0.402411] pci 0000:00:14.1: >[1002:439c] type 00 class 0x01018a [ 0.402429] pci 0000:00:14.1: >reg 10: [io 0x0000-0x0007] [ 0.402439] pci 0000:00:14.1: >reg 14: [io 0x0000-0x0003] [ 0.402450] pci 0000:00:14.1: >reg 18: [io 0x0000-0x0007] [ 0.402460] pci 0000:00:14.1: >reg 1c: [io 0x0000-0x0003] [ 0.402470] pci 0000:00:14.1: >reg 20: [io 0xff00-0xff0f] [ 0.402535] pci 0000:00:14.2: >[1002:4383] type 00 class 0x040300 [ 0.402559] pci 0000:00:14.2: >reg 10: [mem 0xfe7f4000-0xfe7f7fff 64bit] [ 0.402630] pci 0000:00:14.2: >PME# supported from D0 D3hot D3cold [ 0.402648] pci 0000:00:14.3: >[1002:439d] type 00 class 0x060100 [ 0.402732] pci 0000:00:14.4: >[1002:4384] type 01 class 0x060401 [ 0.402778] pci 0000:00:14.5: >[1002:4399] type 00 class 0x0c0310 [ 0.402793] pci 0000:00:14.5: >reg 10: [mem 0xfe7f9000-0xfe7f9fff] [ 0.402868] pci 0000:00:18.0: >[1022:1100] type 00 class 0x060000 [ 0.402886] pci 0000:00:18.1: >[1022:1101] type 00 class 0x060000 [ 0.402901] pci 0000:00:18.2: >[1022:1102] type 00 class 0x060000 [ 0.402918] pci 0000:00:18.3: >[1022:1103] type 00 class 0x060000 [ 0.402981] pci 0000:01:00.0: >[1002:6779] type 00 class 0x030000 [ 0.402997] pci 0000:01:00.0: >reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.403009] pci 0000:01:00.0: >reg 18: [mem 0xfe8c0000-0xfe8dffff 64bit] [ 0.403018] pci 0000:01:00.0: >reg 20: [io 0xc000-0xc0ff] [ 0.403033] pci 0000:01:00.0: >reg 30: [mem 0xfe8a0000-0xfe8bffff pref] [ 0.403071] pci 0000:01:00.0: >supports D1 D2 [ 0.403098] pci 0000:01:00.1: >[1002:aa98] type 00 class 0x040300 [ 0.403113] pci 0000:01:00.1: >reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit] [ 0.403184] pci 0000:01:00.1: >supports D1 D2 [ 0.408038] pci 0000:00:02.0: >PCI bridge to [bus 01-01] [ 0.408043] pci 0000:00:02.0: > bridge window [io 0xc000-0xcfff] [ 0.408046] pci 0000:00:02.0: > bridge window [mem 0xfe800000-0xfe8fffff] [ 0.408050] pci 0000:00:02.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.408092] pci 0000:02:00.0: >[168c:002b] type 00 class 0x028000 [ 0.408110] pci 0000:02:00.0: >reg 10: [mem 0xfe9f0000-0xfe9fffff 64bit] [ 0.408191] pci 0000:02:00.0: >supports D1 [ 0.408193] pci 0000:02:00.0: >PME# supported from D0 D1 D3hot [ 0.416035] pci 0000:00:04.0: >PCI bridge to [bus 02-02] [ 0.416040] pci 0000:00:04.0: > bridge window [mem 0xfe900000-0xfe9fffff] [ 0.416084] pci 0000:03:00.0: >[10ec:8168] type 00 class 0x020000 [ 0.416097] pci 0000:03:00.0: >reg 10: [io 0xd800-0xd8ff] [ 0.416119] pci 0000:03:00.0: >reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref] [ 0.416134] pci 0000:03:00.0: >reg 20: [mem 0xfdee0000-0xfdeeffff 64bit pref] [ 0.416144] pci 0000:03:00.0: >reg 30: [mem 0xfeaf0000-0xfeafffff pref] [ 0.416194] pci 0000:03:00.0: >supports D1 D2 [ 0.416196] pci 0000:03:00.0: >PME# supported from D0 D1 D2 D3hot D3cold [ 0.424037] pci 0000:00:05.0: >PCI bridge to [bus 03-03] [ 0.424041] pci 0000:00:05.0: > bridge window [io 0xd000-0xdfff] [ 0.424044] pci 0000:00:05.0: > bridge window [mem 0xfea00000-0xfeafffff] [ 0.424048] pci 0000:00:05.0: > bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.424081] pci 0000:04:05.0: >[1822:4e35] type 00 class 0x048000 [ 0.424100] pci 0000:04:05.0: >reg 10: [mem 0xfdfff000-0xfdffffff pref] [ 0.424195] pci 0000:04:06.0: >[1102:0004] type 00 class 0x040100 [ 0.424217] pci 0000:04:06.0: >reg 10: [io 0xe400-0xe43f] [ 0.424319] pci 0000:04:06.0: >supports D1 D2 [ 0.424341] pci 0000:04:06.1: >[1102:7003] type 00 class 0x098000 [ 0.424362] pci 0000:04:06.1: >reg 10: [io 0xe800-0xe807] [ 0.424464] pci 0000:04:06.1: >supports D1 D2 [ 0.424489] pci 0000:04:06.2: >[1102:4001] type 00 class 0x0c0010 [ 0.424513] pci 0000:04:06.2: >reg 10: [mem 0xfebff800-0xfebfffff] [ 0.424527] pci 0000:04:06.2: >reg 14: [mem 0xfebf8000-0xfebfbfff] [ 0.424625] pci 0000:04:06.2: >supports D1 D2 [ 0.424627] pci 0000:04:06.2: >PME# supported from D0 D1 D2 D3hot [ 0.424688] pci 0000:00:14.4: >PCI bridge to [bus 04-04] (subtractive decode) [ 0.424693] pci 0000:00:14.4: > bridge window [io 0xe000-0xefff] [ 0.424698] pci 0000:00:14.4: > bridge window [mem 0xfeb00000-0xfebfffff] [ 0.424702] pci 0000:00:14.4: > bridge window [mem 0xfdf00000-0xfdffffff pref] [ 0.424705] pci 0000:00:14.4: > bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.424707] pci 0000:00:14.4: > bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.424709] pci 0000:00:14.4: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.424711] pci 0000:00:14.4: > bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.424714] pci 0000:00:14.4: > bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode) [ 0.424716] pci 0000:00:14.4: > bridge window [mem 0xf0000000-0xfed44fff] (subtractive decode) [ 0.424731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.424923] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.424993] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.425060] pci0000:00: >Requesting ACPI _OSC control (0x1d) [ 0.425063] pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.425064] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.430730] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15) [ 0.430772] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 12 14 15) [ 0.430810] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.430848] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15) [ 0.430885] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 12 14 15) [ 0.430924] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15) [ 0.430962] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *10 11 12 14 15) [ 0.430999] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.431133] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.431138] vgaarb: loaded [ 0.431139] vgaarb: bridge control possible 0000:01:00.0 [ 0.431335] SCSI subsystem initialized [ 0.431405] libata version 3.00 loaded. [ 0.431427] ACPI: bus type usb registered [ 0.431451] usbcore: registered new interface driver usbfs [ 0.431464] usbcore: registered new interface driver hub [ 0.431493] usbcore: registered new device driver usb [ 0.431586] PCI: Using ACPI for IRQ routing [ 0.432930] Freeing initrd memory: 14868k freed [ 0.441039] PCI: pci_cache_line_size set to 64 bytes [ 0.441157] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff] [ 0.441159] e820: reserve RAM buffer [mem 0xcff90000-0xcfffffff] [ 0.441267] NetLabel: Initializing [ 0.441269] NetLabel: domain hash size = 128 [ 0.441270] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.441282] NetLabel: unlabeled traffic allowed by default [ 0.441301] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.441301] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.442131] Switching to clocksource hpet [ 0.447963] AppArmor: AppArmor Filesystem Enabled [ 0.448030] pnp: PnP ACPI init [ 0.448050] ACPI: bus type pnp registered [ 0.448185] pnp 00:00: >[bus 00-ff] [ 0.448187] pnp 00:00: >[io 0x0cf8-0x0cff] [ 0.448190] pnp 00:00: >[io 0x0000-0x0cf7 window] [ 0.448192] pnp 00:00: >[io 0x0d00-0xffff window] [ 0.448194] pnp 00:00: >[mem 0x000a0000-0x000bffff window] [ 0.448196] pnp 00:00: >[mem 0x000d0000-0x000dffff window] [ 0.448198] pnp 00:00: >[mem 0xd0000000-0xdfffffff window] [ 0.448200] pnp 00:00: >[mem 0xf0000000-0xfed44fff window] [ 0.448258] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.448349] pnp 00:01: >[mem 0x00000000-0xffffffffffffffff disabled] [ 0.448351] pnp 00:01: >[mem 0x00000000-0xffffffffffffffff disabled] [ 0.448415] system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.448459] pnp 00:02: >[dma 4] [ 0.448461] pnp 00:02: >[io 0x0000-0x000f] [ 0.448463] pnp 00:02: >[io 0x0081-0x0083] [ 0.448465] pnp 00:02: >[io 0x0087] [ 0.448467] pnp 00:02: >[io 0x0089-0x008b] [ 0.448469] pnp 00:02: >[io 0x008f] [ 0.448471] pnp 00:02: >[io 0x00c0-0x00df] [ 0.448497] pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active) [ 0.448508] pnp 00:03: >[io 0x0070-0x0071] [ 0.448519] pnp 00:03: >[irq 8] [ 0.448546] pnp 00:03: >Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.448555] pnp 00:04: >[io 0x0061] [ 0.448578] pnp 00:04: >Plug and Play ACPI device, IDs PNP0800 (active) [ 0.448587] pnp 00:05: >[io 0x00f0-0x00ff] [ 0.448595] pnp 00:05: >[irq 13] [ 0.448622] pnp 00:05: >Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.448846] pnp 00:06: >[io 0x03f8-0x03ff] [ 0.448851] pnp 00:06: >[irq 4] [ 0.448854] pnp 00:06: >[dma 0 disabled] [ 0.448917] pnp 00:06: >Plug and Play ACPI device, IDs PNP0501 (active) [ 0.449228] pnp 00:07: >[mem 0xfed00000-0xfed003ff] [ 0.449258] pnp 00:07: >Plug and Play ACPI device, IDs PNP0103 (active) [ 0.449342] pnp 00:08: >[io 0x0060] [ 0.449344] pnp 00:08: >[io 0x0064] [ 0.449346] pnp 00:08: >[mem 0xfec00000-0xfec00fff] [ 0.449348] pnp 00:08: >[mem 0xfee00000-0xfee00fff] [ 0.449401] system 00:08: >[mem 0xfec00000-0xfec00fff] could not be reserved [ 0.449404] system 00:08: >[mem 0xfee00000-0xfee00fff] has been reserved [ 0.449407] system 00:08: >Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.449572] pnp 00:09: >[io 0x0010-0x001f] [ 0.449575] pnp 00:09: >[io 0x0022-0x003f] [ 0.449576] pnp 00:09: >[io 0x0062-0x0063] [ 0.449578] pnp 00:09: >[io 0x0065-0x006f] [ 0.449580] pnp 00:09: >[io 0x0072-0x007f] [ 0.449582] pnp 00:09: >[io 0x0080] [ 0.449584] pnp 00:09: >[io 0x0084-0x0086] [ 0.449586] pnp 00:09: >[io 0x0088] [ 0.449587] pnp 00:09: >[io 0x008c-0x008e] [ 0.449589] pnp 00:09: >[io 0x0090-0x009f] [ 0.449591] pnp 00:09: >[io 0x00a2-0x00bf] [ 0.449593] pnp 00:09: >[io 0x00b1] [ 0.449595] pnp 00:09: >[io 0x00e0-0x00ef] [ 0.449597] pnp 00:09: >[io 0x04d0-0x04d1] [ 0.449599] pnp 00:09: >[io 0x040b] [ 0.449600] pnp 00:09: >[io 0x04d6] [ 0.449602] pnp 00:09: >[io 0x0c00-0x0c01] [ 0.449604] pnp 00:09: >[io 0x0c14] [ 0.449606] pnp 00:09: >[io 0x0c50-0x0c51] [ 0.449608] pnp 00:09: >[io 0x0c52] [ 0.449610] pnp 00:09: >[io 0x0c6c] [ 0.449611] pnp 00:09: >[io 0x0c6f] [ 0.449616] pnp 00:09: >[io 0x0cd0-0x0cd1] [ 0.449618] pnp 00:09: >[io 0x0cd2-0x0cd3] [ 0.449620] pnp 00:09: >[io 0x0cd4-0x0cd5] [ 0.449622] pnp 00:09: >[io 0x0cd6-0x0cd7] [ 0.449624] pnp 00:09: >[io 0x0cd8-0x0cdf] [ 0.449626] pnp 00:09: >[io 0x0800-0x089f] [ 0.449628] pnp 00:09: >[io 0x0b20-0x0b3f] [ 0.449629] pnp 00:09: >[io 0x0b00-0x0b0f] [ 0.449632] pnp 00:09: >[io 0x0000-0xffffffffffffffff disabled] [ 0.449633] pnp 00:09: >[io 0x0900-0x090f] [ 0.449635] pnp 00:09: >[io 0x0910-0x091f] [ 0.449637] pnp 00:09: >[io 0xfe00-0xfefe] [ 0.449639] pnp 00:09: >[io 0x0060] [ 0.449641] pnp 00:09: >[io 0x0064] [ 0.449643] pnp 00:09: >[mem 0xffb80000-0xffbfffff] [ 0.449645] pnp 00:09: >[mem 0xfec10000-0xfec1001f] [ 0.449647] pnp 00:09: >[mem 0xfff00000-0xffffffff] [ 0.449649] pnp 00:09: >[mem 0x00000000-0xffffffffffffffff disabled] [ 0.449744] system 00:09: >[io 0x04d0-0x04d1] has been reserved [ 0.449746] system 00:09: >[io 0x040b] has been reserved [ 0.449749] system 00:09: >[io 0x04d6] has been reserved [ 0.449751] system 00:09: >[io 0x0c00-0x0c01] has been reserved [ 0.449754] system 00:09: >[io 0x0c14] has been reserved [ 0.449757] system 00:09: >[io 0x0c50-0x0c51] has been reserved [ 0.449759] system 00:09: >[io 0x0c52] has been reserved [ 0.449762] system 00:09: >[io 0x0c6c] has been reserved [ 0.449765] system 00:09: >[io 0x0c6f] has been reserved [ 0.449767] system 00:09: >[io 0x0cd0-0x0cd1] has been reserved [ 0.449770] system 00:09: >[io 0x0cd2-0x0cd3] has been reserved [ 0.449772] system 00:09: >[io 0x0cd4-0x0cd5] has been reserved [ 0.449775] system 00:09: >[io 0x0cd6-0x0cd7] has been reserved [ 0.449778] system 00:09: >[io 0x0cd8-0x0cdf] has been reserved [ 0.449781] system 00:09: >[io 0x0800-0x089f] has been reserved [ 0.449783] system 00:09: >[io 0x0b20-0x0b3f] has been reserved [ 0.449786] system 00:09: >[io 0x0b00-0x0b0f] has been reserved [ 0.449789] system 00:09: >[io 0x0900-0x090f] has been reserved [ 0.449791] system 00:09: >[io 0x0910-0x091f] has been reserved [ 0.449794] system 00:09: >[io 0xfe00-0xfefe] has been reserved [ 0.449797] system 00:09: >[mem 0xffb80000-0xffbfffff] has been reserved [ 0.449800] system 00:09: >[mem 0xfec10000-0xfec1001f] has been reserved [ 0.449803] system 00:09: >[mem 0xfff00000-0xffffffff] has been reserved [ 0.449806] system 00:09: >Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.449919] pnp 00:0a: >[io 0x0000-0xffffffffffffffff disabled] [ 0.449921] pnp 00:0a: >[io 0x0600-0x06df] [ 0.449923] pnp 00:0a: >[io 0x0ae0-0x0aef] [ 0.449975] system 00:0a: >[io 0x0600-0x06df] has been reserved [ 0.449978] system 00:0a: >[io 0x0ae0-0x0aef] has been reserved [ 0.449981] system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.450023] pnp 00:0b: >[mem 0xe0000000-0xefffffff] [ 0.450072] system 00:0b: >[mem 0xe0000000-0xefffffff] has been reserved [ 0.450075] system 00:0b: >Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.450697] pnp 00:0c: >[mem 0x00000000-0x0009ffff] [ 0.450700] pnp 00:0c: >[mem 0x000c0000-0x000cffff] [ 0.450702] pnp 00:0c: >[mem 0x000e0000-0x000fffff] [ 0.450704] pnp 00:0c: >[mem 0x00100000-0xcfffffff] [ 0.450706] pnp 00:0c: >[mem 0xfed45000-0xffffffff] [ 0.450769] system 00:0c: >[mem 0x00000000-0x0009ffff] could not be reserved [ 0.450772] system 00:0c: >[mem 0x000c0000-0x000cffff] could not be reserved [ 0.450775] system 00:0c: >[mem 0x000e0000-0x000fffff] could not be reserved [ 0.450778] system 00:0c: >[mem 0x00100000-0xcfffffff] could not be reserved [ 0.450780] system 00:0c: >[mem 0xfed45000-0xffffffff] could not be reserved [ 0.450784] system 00:0c: >Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.450886] pnp: PnP ACPI: found 13 devices [ 0.450888] ACPI: ACPI bus type pnp unregistered [ 0.458103] pci 0000:00:02.0: >PCI bridge to [bus 01-01] [ 0.458109] pci 0000:00:02.0: > bridge window [io 0xc000-0xcfff] [ 0.458112] pci 0000:00:02.0: > bridge window [mem 0xfe800000-0xfe8fffff] [ 0.458116] pci 0000:00:02.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.458120] pci 0000:00:04.0: >PCI bridge to [bus 02-02] [ 0.458123] pci 0000:00:04.0: > bridge window [mem 0xfe900000-0xfe9fffff] [ 0.458128] pci 0000:00:05.0: >PCI bridge to [bus 03-03] [ 0.458131] pci 0000:00:05.0: > bridge window [io 0xd000-0xdfff] [ 0.458134] pci 0000:00:05.0: > bridge window [mem 0xfea00000-0xfeafffff] [ 0.458137] pci 0000:00:05.0: > bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.458142] pci 0000:00:14.4: >PCI bridge to [bus 04-04] [ 0.458146] pci 0000:00:14.4: > bridge window [io 0xe000-0xefff] [ 0.458151] pci 0000:00:14.4: > bridge window [mem 0xfeb00000-0xfebfffff] [ 0.458156] pci 0000:00:14.4: > bridge window [mem 0xfdf00000-0xfdffffff pref] [ 0.458197] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7] [ 0.458200] pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff] [ 0.458202] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff] [ 0.458204] pci_bus 0000:00: >resource 7 [mem 0x000d0000-0x000dffff] [ 0.458207] pci_bus 0000:00: >resource 8 [mem 0xd0000000-0xdfffffff] [ 0.458209] pci_bus 0000:00: >resource 9 [mem 0xf0000000-0xfed44fff] [ 0.458212] pci_bus 0000:01: >resource 0 [io 0xc000-0xcfff] [ 0.458214] pci_bus 0000:01: >resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.458216] pci_bus 0000:01: >resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.458218] pci_bus 0000:02: >resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.458221] pci_bus 0000:03: >resource 0 [io 0xd000-0xdfff] [ 0.458223] pci_bus 0000:03: >resource 1 [mem 0xfea00000-0xfeafffff] [ 0.458225] pci_bus 0000:03: >resource 2 [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.458227] pci_bus 0000:04: >resource 0 [io 0xe000-0xefff] [ 0.458229] pci_bus 0000:04: >resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.458232] pci_bus 0000:04: >resource 2 [mem 0xfdf00000-0xfdffffff pref] [ 0.458234] pci_bus 0000:04: >resource 4 [io 0x0000-0x0cf7] [ 0.458237] pci_bus 0000:04: >resource 5 [io 0x0d00-0xffff] [ 0.458239] pci_bus 0000:04: >resource 6 [mem 0x000a0000-0x000bffff] [ 0.458242] pci_bus 0000:04: >resource 7 [mem 0x000d0000-0x000dffff] [ 0.458244] pci_bus 0000:04: >resource 8 [mem 0xd0000000-0xdfffffff] [ 0.458246] pci_bus 0000:04: >resource 9 [mem 0xf0000000-0xfed44fff] [ 0.458288] NET: Registered protocol family 2 [ 0.458410] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.459587] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.463363] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.463845] TCP: Hash tables configured (established 524288 bind 65536) [ 0.463848] TCP: reno registered [ 0.463860] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.463901] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.464050] NET: Registered protocol family 1 [ 0.840040] pci 0000:01:00.0: >Boot video device [ 0.840064] PCI: CLS 64 bytes, default 64 [ 0.840945] PCI-DMA: Disabling AGP. [ 0.841037] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 0.841038] PCI-DMA: using GART IOMMU. [ 0.841041] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.844831] audit: initializing netlink socket (disabled) [ 0.844849] type=2000 audit(1351109601.840:1): initialized [ 0.866246] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.868227] VFS: Disk quotas dquot_6.5.2 [ 0.868277] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.868850] fuse init (API version 7.19) [ 0.868948] msgmni has been set to 7901 [ 0.869504] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.869555] io scheduler noop registered [ 0.869557] io scheduler deadline registered (default) [ 0.869588] io scheduler cfq registered [ 0.869758] pcieport 0000:00:02.0: >irq 40 for MSI/MSI-X [ 0.869856] pcieport 0000:00:04.0: >irq 41 for MSI/MSI-X [ 0.869937] pcieport 0000:00:05.0: >irq 42 for MSI/MSI-X [ 0.870012] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.870032] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.870160] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.870165] ACPI: Power Button [PWRB] [ 0.870205] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.870208] ACPI: Power Button [PWRF] [ 0.898385] GHES: HEST is not enabled! [ 0.898487] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.918989] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.940879] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.941184] Linux agpgart interface v0.103 [ 0.942736] brd: module loaded [ 0.943537] loop: module loaded [ 0.943660] ahci 0000:00:11.0: >version 3.0 [ 0.943833] ahci 0000:00:11.0: >AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.943837] ahci 0000:00:11.0: >flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 0.944554] scsi0 : ahci [ 0.944653] scsi1 : ahci [ 0.944728] scsi2 : ahci [ 0.944801] scsi3 : ahci [ 0.944932] ata1: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ff900 irq 22 [ 0.944935] ata2: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ff980 irq 22 [ 0.944938] ata3: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa00 irq 22 [ 0.944941] ata4: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa80 irq 22 [ 0.945079] pata_acpi 0000:00:14.1: >setting latency timer to 64 [ 0.945415] Fixed MDIO Bus: probed [ 0.945464] tun: Universal TUN/TAP device driver, 1.6 [ 0.945465] tun: (C) 1999-2004 Max Krasnyansky [ 0.945539] PPP generic driver version 2.4.2 [ 0.945602] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.945657] ehci_hcd 0000:00:12.2: >EHCI Host Controller [ 0.945665] ehci_hcd 0000:00:12.2: >new USB bus registered, assigned bus number 1 [ 0.945675] ehci_hcd 0000:00:12.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.945702] QUIRK: Enable AMD PLL fix [ 0.945705] ehci_hcd 0000:00:12.2: >applying AMD SB600/SB700 USB freeze workaround [ 0.945719] ehci_hcd 0000:00:12.2: >debug port 1 [ 0.945743] ehci_hcd 0000:00:12.2: >irq 17, io mem 0xfe7ff000 [ 0.956022] ehci_hcd 0000:00:12.2: >USB 2.0 started, EHCI 1.00 [ 0.956048] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002 [ 0.956050] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.956053] usb usb1: >Product: EHCI Host Controller [ 0.956055] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd [ 0.956057] usb usb1: >SerialNumber: 0000:00:12.2 [ 0.956181] hub 1-0:1.0: >USB hub found [ 0.956185] hub 1-0:1.0: >6 ports detected [ 0.956307] ehci_hcd 0000:00:13.2: >EHCI Host Controller [ 0.956315] ehci_hcd 0000:00:13.2: >new USB bus registered, assigned bus number 2 [ 0.956323] ehci_hcd 0000:00:13.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.956337] ehci_hcd 0000:00:13.2: >applying AMD SB600/SB700 USB freeze workaround [ 0.956350] ehci_hcd 0000:00:13.2: >debug port 1 [ 0.956372] ehci_hcd 0000:00:13.2: >irq 19, io mem 0xfe7fc800 [ 0.968021] ehci_hcd 0000:00:13.2: >USB 2.0 started, EHCI 1.00 [ 0.968035] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002 [ 0.968037] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.968039] usb usb2: >Product: EHCI Host Controller [ 0.968041] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd [ 0.968043] usb usb2: >SerialNumber: 0000:00:13.2 [ 0.968135] hub 2-0:1.0: >USB hub found [ 0.968139] hub 2-0:1.0: >6 ports detected [ 0.968233] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.968274] ohci_hcd 0000:00:12.0: >OHCI Host Controller [ 0.968280] ohci_hcd 0000:00:12.0: >new USB bus registered, assigned bus number 3 [ 0.968304] ohci_hcd 0000:00:12.0: >irq 16, io mem 0xfe7fd000 [ 1.028024] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001 [ 1.028026] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.028029] usb usb3: >Product: OHCI Host Controller [ 1.028031] usb usb3: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd [ 1.028033] usb usb3: >SerialNumber: 0000:00:12.0 [ 1.028123] hub 3-0:1.0: >USB hub found [ 1.028130] hub 3-0:1.0: >3 ports detected [ 1.028221] ohci_hcd 0000:00:12.1: >OHCI Host Controller [ 1.028227] ohci_hcd 0000:00:12.1: >new USB bus registered, assigned bus number 4 [ 1.028244] ohci_hcd 0000:00:12.1: >irq 16, io mem 0xfe7fe000 [ 1.088022] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001 [ 1.088025] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.088027] usb usb4: >Product: OHCI Host Controller [ 1.088029] usb usb4: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd [ 1.088031] usb usb4: >SerialNumber: 0000:00:12.1 [ 1.088119] hub 4-0:1.0: >USB hub found [ 1.088126] hub 4-0:1.0: >3 ports detected [ 1.088212] ohci_hcd 0000:00:13.0: >OHCI Host Controller [ 1.088218] ohci_hcd 0000:00:13.0: >new USB bus registered, assigned bus number 5 [ 1.088244] ohci_hcd 0000:00:13.0: >irq 18, io mem 0xfe7fa000 [ 1.148022] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001 [ 1.148024] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.148026] usb usb5: >Product: OHCI Host Controller [ 1.148028] usb usb5: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd [ 1.148030] usb usb5: >SerialNumber: 0000:00:13.0 [ 1.148118] hub 5-0:1.0: >USB hub found [ 1.148125] hub 5-0:1.0: >3 ports detected [ 1.148213] ohci_hcd 0000:00:13.1: >OHCI Host Controller [ 1.148221] ohci_hcd 0000:00:13.1: >new USB bus registered, assigned bus number 6 [ 1.148237] ohci_hcd 0000:00:13.1: >irq 18, io mem 0xfe7fb000 [ 1.208025] usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001 [ 1.208028] usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.208030] usb usb6: >Product: OHCI Host Controller [ 1.208032] usb usb6: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd [ 1.208034] usb usb6: >SerialNumber: 0000:00:13.1 [ 1.208132] hub 6-0:1.0: >USB hub found [ 1.208151] hub 6-0:1.0: >3 ports detected [ 1.208240] ohci_hcd 0000:00:14.5: >OHCI Host Controller [ 1.208246] ohci_hcd 0000:00:14.5: >new USB bus registered, assigned bus number 7 [ 1.208262] ohci_hcd 0000:00:14.5: >irq 18, io mem 0xfe7f9000 [ 1.268048] usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001 [ 1.268050] usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.268052] usb usb7: >Product: OHCI Host Controller [ 1.268054] usb usb7: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd [ 1.268056] usb usb7: >SerialNumber: 0000:00:14.5 [ 1.268151] hub 7-0:1.0: >USB hub found [ 1.268160] hub 7-0:1.0: >2 ports detected [ 1.268228] uhci_hcd: USB Universal Host Controller Interface driver [ 1.268304] usbcore: registered new interface driver libusual [ 1.268341] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.270535] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.270540] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.270666] mousedev: PS/2 mouse device common for all mice [ 1.270803] rtc_cmos 00:03: >RTC can wake from S4 [ 1.270931] rtc_cmos 00:03: >rtc core: registered rtc_cmos as rtc0 [ 1.270959] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.271042] device-mapper: uevent: version 1.0.3 [ 1.271110] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.271118] cpuidle: using governor ladder [ 1.271119] cpuidle: using governor menu [ 1.271121] EFI Variables Facility v0.08 2004-May-17 [ 1.271382] ashmem: initialized [ 1.271510] TCP: cubic registered [ 1.271616] NET: Registered protocol family 10 [ 1.271820] NET: Registered protocol family 17 [ 1.271829] Key type dns_resolver registered [ 1.271983] PM: Hibernation image not present or could not be loaded. [ 1.271996] registered taskstats version 1 [ 1.274758] Key type trusted registered [ 1.277208] Key type encrypted registered [ 1.279965] Magic number: 0:120:246 [ 1.280123] rtc_cmos 00:03: >setting system clock to 2012-10-24 20:13:22 UTC (1351109602) [ 1.280244] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2 cpu cores) (version 2.20.00) [ 1.280285] powernow-k8: fid 0x12 (2600 MHz), vid 0x8 [ 1.280286] powernow-k8: fid 0x10 (2400 MHz), vid 0xa [ 1.280288] powernow-k8: fid 0xe (2200 MHz), vid 0xc [ 1.280289] powernow-k8: fid 0xc (2000 MHz), vid 0xe [ 1.280290] powernow-k8: fid 0xa (1800 MHz), vid 0x10 [ 1.280292] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 1.280333] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.280334] EDD information not available. [ 1.324029] usb 1-2: >new high-speed USB device number 3 using ehci_hcd [ 1.436018] ata4: softreset failed (device not ready) [ 1.436022] ata4: applying PMP SRST workaround and retrying [ 1.436172] ata3: softreset failed (device not ready) [ 1.436175] ata3: applying PMP SRST workaround and retrying [ 1.436191] ata1: softreset failed (device not ready) [ 1.436194] ata1: applying PMP SRST workaround and retrying [ 1.436210] ata2: softreset failed (device not ready) [ 1.436213] ata2: applying PMP SRST workaround and retrying [ 1.546328] usb 1-2: >New USB device found, idVendor=0bda, idProduct=0103 [ 1.546330] usb 1-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.546333] usb 1-2: >Product: USB 2.0 Card Chip [ 1.546335] usb 1-2: >Manufacturer: Generic [ 1.546336] usb 1-2: >SerialNumber: 060313014271000001 [ 1.549693] Initializing USB Mass Storage driver... [ 1.549852] scsi4 : usb-storage 1-2:1.0 [ 1.549915] usbcore: registered new interface driver usb-storage [ 1.549916] USB Mass Storage support registered. [ 1.608046] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.608073] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.608098] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.608119] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.609189] ata1.00: ATA-7: Hitachi HDS721616PLA380, P22OA70A, max UDMA/133 [ 1.609191] ata1.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.609767] ata4.00: ATAPI: ATAPI DVD A DH16AASH, SA15, max UDMA/100 [ 1.610186] ata2.00: ATA-8: WDC WD10EADS-22M2B0, 01.00A01, max UDMA/133 [ 1.610189] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.610445] ata1.00: configured for UDMA/133 [ 1.610484] ata4.00: configured for UDMA/100 [ 1.610599] scsi 0:0:0:0: >Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5 [ 1.610723] sd 0:0:0:0: >[sda] 321672960 512-byte logical blocks: (164 GB/153 GiB) [ 1.610746] sd 0:0:0:0: >Attached scsi generic sg0 type 0 [ 1.610765] sd 0:0:0:0: >[sda] Write Protect is off [ 1.610768] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00 [ 1.610812] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.612317] ata2.00: configured for UDMA/133 [ 1.617682] ata3.00: ATA-8: SAMSUNG HM250HI, 2AC101C4, max UDMA/133 [ 1.617685] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.627298] ata3.00: configured for UDMA/133 [ 1.639321] sda: sda1 sda2 sda3 < sda5 > [ 1.639712] sd 0:0:0:0: >[sda] Attached SCSI disk [ 1.639797] scsi 1:0:0:0: >Direct-Access ATA WDC WD10EADS-22M 01.0 PQ: 0 ANSI: 5 [ 1.639892] sd 1:0:0:0: >[sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.639908] sd 1:0:0:0: >Attached scsi generic sg1 type 0 [ 1.639931] sd 1:0:0:0: >[sdb] Write Protect is off [ 1.639934] sd 1:0:0:0: >[sdb] Mode Sense: 00 3a 00 00 [ 1.639979] sd 1:0:0:0: >[sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.681958] sdb: sdb1 [ 1.682217] sd 1:0:0:0: >[sdb] Attached SCSI disk [ 1.682304] scsi 2:0:0:0: >Direct-Access ATA SAMSUNG HM250HI 2AC1 PQ: 0 ANSI: 5 [ 1.682394] sd 2:0:0:0: >[sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.682410] sd 2:0:0:0: >Attached scsi generic sg2 type 0 [ 1.682432] sd 2:0:0:0: >[sdc] Write Protect is off [ 1.682435] sd 2:0:0:0: >[sdc] Mode Sense: 00 3a 00 00 [ 1.682472] sd 2:0:0:0: >[sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.739883] sdc: sdc1 sdc2 sdc3 < sdc5 > [ 1.740277] sd 2:0:0:0: >[sdc] Attached SCSI disk [ 1.742696] scsi 3:0:0:0: >CD-ROM ATAPI DVD A DH16AASH SA15 PQ: 0 ANSI: 5 [ 1.745868] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.745870] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.745979] sr 3:0:0:0: >Attached scsi CD-ROM sr0 [ 1.746038] sr 3:0:0:0: >Attached scsi generic sg3 type 5 [ 1.747547] Freeing unused kernel memory: 928k freed [ 1.747974] Write protecting the kernel read-only data: 12288k [ 1.752531] Freeing unused kernel memory: 1472k freed [ 1.756584] Freeing unused kernel memory: 1124k freed [ 1.777542] udevd[104]: starting version 175 [ 1.837094] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.837121] r8169 0000:03:00.0: >enabling device (0105 -> 0107) [ 1.837208] r8169 0000:03:00.0: >irq 43 for MSI/MSI-X [ 1.837396] r8169 0000:03:00.0: >eth0: RTL8168c/8111c at 0xffffc90000616000, 00:21:85:5a:1a:13, XID 1c2000c0 IRQ 43 [ 1.837399] r8169 0000:03:00.0: >eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 1.873692] scsi5 : pata_atiixp [ 1.873956] scsi6 : pata_atiixp [ 1.874543] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 1.874545] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.980042] usb 3-1: >new low-speed USB device number 2 using ohci_hcd [ 2.108073] firewire_ohci 0000:04:06.2: >added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 2.149103] usb 3-1: >New USB device found, idVendor=147a, idProduct=e00d [ 2.149106] usb 3-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.149109] usb 3-1: >Product: IR Receiver [ 2.149111] usb 3-1: >Manufacturer: Acer [ 2.161216] usbcore: registered new interface driver usbhid [ 2.161220] usbhid: USB HID core driver [ 2.169230] input: Acer IR Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2 [ 2.169357] hid-generic 0003:147A:E00D.0001: >input,hiddev0,hidraw0: USB HID v1.10 Keyboard [Acer IR Receiver] on usb-0000:00:12.0-1/input0 [ 2.303172] EXT4-fs (sdc1): INFO: recovery required on readonly filesystem [ 2.303176] EXT4-fs (sdc1): write access will be enabled during recovery [ 2.412021] usb 3-3: >new low-speed USB device number 3 using ohci_hcd [ 2.578883] scsi 4:0:0:0: >Direct-Access Generic 2.0 Reader-CF 1.00 PQ: 0 ANSI: 0 CCS [ 2.581121] usb 3-3: >New USB device found, idVendor=046d, idProduct=c517 [ 2.581126] usb 3-3: >New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.581129] usb 3-3: >Product: USB Receiver [ 2.581131] usb 3-3: >Manufacturer: Logitech [ 2.590858] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input3 [ 2.590947] logitech 0003:046D:C517.0002: >input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-3/input0 [ 2.596207] logitech 0003:046D:C517.0003: >fixing up Logitech keyboard report descriptor [ 2.597055] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/input/input4 [ 2.597197] logitech 0003:046D:C517.0003: >input,hiddev0,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-3/input1 [ 2.608146] firewire_core 0000:04:06.2: created device fw0: GUID 00023c0091072b1d, S400 [ 2.609371] scsi 4:0:0:1: >Direct-Access Generic 2.0 Reader-SM/xD 1.00 PQ: 0 ANSI: 0 CCS [ 2.639865] scsi 4:0:0:2: >Direct-Access Generic 2.0 Reader-SD 1.00 PQ: 0 ANSI: 0 CCS [ 2.670366] scsi 4:0:0:3: >Direct-Access Generic 2.0 Reader-MS 1.00 PQ: 0 ANSI: 0 CCS [ 2.671029] sd 4:0:0:0: >Attached scsi generic sg4 type 0 [ 2.671183] sd 4:0:0:1: >Attached scsi generic sg5 type 0 [ 2.671319] sd 4:0:0:2: >Attached scsi generic sg6 type 0 [ 2.671452] sd 4:0:0:3: >Attached scsi generic sg7 type 0 [ 2.696726] sd 4:0:0:3: >[sdg] Attached SCSI removable disk [ 2.697732] sd 4:0:0:0: >[sdd] Attached SCSI removable disk [ 2.698729] sd 4:0:0:1: >[sde] Attached SCSI removable disk [ 2.699735] sd 4:0:0:2: >[sdf] Attached SCSI removable disk [ 3.244021] usb 4-3: >new full-speed USB device number 2 using ohci_hcd [ 3.413144] usb 4-3: >New USB device found, idVendor=0471, idProduct=0815 [ 3.413149] usb 4-3: >New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.413151] usb 4-3: >Product: eHome Infrared Transceiver [ 3.413153] usb 4-3: >Manufacturer: Philips [ 3.413155] usb 4-3: >SerialNumber: PH00aB4D [ 4.879688] EXT4-fs (sdc1): recovery complete [ 4.889034] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 19.599519] Adding 3962876k swap on /dev/sdc5. Priority:-1 extents:1 across:3962876k [ 19.605948] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.630920] udevd[362]: starting version 175 [ 19.688646] lp: driver loaded but no devices found [ 19.754243] cfg80211: Calling CRDA to update world regulatory domain [ 19.833061] [drm] Initialized drm 1.1.0 20060810 [ 19.904663] ath: EEPROM regdomain: 0x809c [ 19.904668] ath: EEPROM indicates we should expect a country code [ 19.904670] ath: doing EEPROM country->regdmn map search [ 19.904671] ath: country maps to regdmn code: 0x52 [ 19.904672] ath: Country alpha2 being used: CN [ 19.904673] ath: Regpair used: 0x52 [ 19.904676] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 19.904678] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 19.904679] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 19.904681] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 19.904682] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 19.904684] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 19.904685] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 19.904686] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 19.904688] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 19.904689] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 19.904690] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 19.904692] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 19.904693] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 19.904695] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 19.904696] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 19.904697] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 19.904699] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 19.904700] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 19.904701] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 19.904703] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 19.904704] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 19.904706] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 19.904707] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 19.904708] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 19.904710] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 19.915338] piix4_smbus 0000:00:14.0: >SMBus Host Controller at 0xb00, revision 0 [ 19.915783] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01 [ 19.915981] sp5100_tco: mmio address 0xfec000f0 already in use [ 19.934324] [drm] radeon defaulting to kernel modesetting. [ 19.934330] [drm] radeon kernel modesetting enabled. [ 19.934703] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1458:0x2203). [ 19.934730] [drm] register mmio base: 0xFE8C0000 [ 19.934731] [drm] register mmio size: 131072 [ 19.935838] ATOM BIOS: GV [ 19.936242] radeon 0000:01:00.0: >VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 19.936245] radeon 0000:01:00.0: >GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [ 19.936588] [drm] Detected VRAM RAM=1024M, BAR=256M [ 19.936593] [drm] RAM width 64bits DDR [ 19.937112] [TTM] Zone kernel: Available graphics memory: 2024614 kiB [ 19.937114] [TTM] Initializing pool allocator [ 19.937118] [TTM] Initializing DMA pool allocator [ 19.937146] [drm] radeon: 1024M of VRAM memory ready [ 19.937147] [drm] radeon: 512M of GTT memory ready. [ 19.937171] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 19.937172] [drm] Driver supports precise vblank timestamp query. [ 19.937222] radeon 0000:01:00.0: >irq 44 for MSI/MSI-X [ 19.937233] radeon 0000:01:00.0: >radeon: using MSI. [ 19.937285] [drm] radeon: irq initialized. [ 19.937290] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 19.938870] [drm] Loading CAICOS Microcode [ 19.943191] k8temp 0000:00:18.3: >Temperature readouts might be wrong - check erratum #141 [ 19.945473] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 19.945478] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 19.945480] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 19.945481] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 19.945483] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 19.945484] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 19.945486] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 19.945487] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 19.945489] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 19.945490] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 19.945491] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 19.945493] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 19.945494] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 19.945496] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 19.945497] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 19.945499] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 19.945500] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 19.945502] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 19.945503] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 19.945505] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 19.945506] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 19.945508] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 19.945509] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 19.945511] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 19.945512] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 19.945514] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 19.945515] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 19.945517] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 19.949013] MCE: In-kernel MCE decoding enabled. [ 19.962848] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control' [ 19.964821] EDAC MC: Ver: 2.1.0 [ 19.964960] Registered led device: ath9k-phy0 [ 19.964969] ieee80211 phy0: >Atheros AR9285 Rev:2 mem=0xffffc90000660000, irq=16 [ 19.964976] cfg80211: Pending regulatory request, waiting for it to be processed... [ 19.974691] AMD64 EDAC driver v3.4.0 [ 19.974747] EDAC amd64: DRAM ECC disabled. [ 19.974754] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 19.974754] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 19.974754] (Note that use of the override may cause unknown side effects.) [ 19.995988] gameport gameport0: >EMU10K1 is pci0000:04:06.1/gameport0, io 0xe800, speed 608kHz [ 20.003856] DVB: registering new adapter (Mantis DVB adapter) [ 20.065333] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 20.068829] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 20.068910] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 20.068964] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 20.069017] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 20.069070] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 20.069130] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 20.069185] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 20.116153] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro [ 20.155400] microcode: AMD CPU family 0xf not supported [ 20.185623] kvm: Nested Virtualization enabled [ 20.200042] Registered IR keymap rc-rc6-mce [ 20.200252] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/rc/rc0/input13 [ 20.200330] rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/rc/rc0 [ 20.211444] IR NEC protocol handler initialized [ 20.218800] IR RC5(x) protocol handler initialized [ 20.226461] IR RC6 protocol handler initialized [ 20.235862] IR JVC protocol handler initialized [ 20.239342] IR Sony protocol handler initialized [ 20.251187] IR SANYO protocol handler initialized [ 20.260819] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input14 [ 20.260983] IR MCE Keyboard/mouse protocol handler initialized [ 20.265361] lirc_dev: IR Remote Control driver registered, major 249 [ 20.266753] rc rc0: >lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0 [ 20.266759] IR LIRC bridge handler initialized [ 20.273039] microcode: AMD CPU family 0xf not supported [ 20.414326] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null) [ 20.428697] mceusb 4-3:1.0: >Registered Philips eHome Infrared Transceiver with mce emulator interface version 1 [ 20.428702] mceusb 4-3:1.0: >2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active) [ 20.428770] usbcore: registered new interface driver mceusb [ 20.452156] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 20.452162] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.452163] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 20.452165] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.452167] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 20.452168] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.452170] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 20.452171] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.452172] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 20.452174] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.452175] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 20.452177] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.452178] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 20.452180] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.452181] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 20.452183] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.452184] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 20.452185] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.452187] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 20.452188] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.452190] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 20.452191] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.452193] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 20.452194] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.452195] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 20.452197] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.452198] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 20.452200] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.452203] cfg80211: World regulatory domain updated: [ 20.452204] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.452206] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.452207] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.452209] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.452210] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.452212] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.452229] cfg80211: Calling CRDA for country: CN [ 20.492960] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 20.492965] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 20.492967] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 20.492969] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 20.492970] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 20.492972] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 20.492973] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 20.492975] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 20.492976] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 20.492978] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 20.492979] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 20.492981] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 20.492983] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 20.492984] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 20.492986] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 20.492987] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 20.492989] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 20.492990] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 20.492992] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 20.492994] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 20.492995] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 20.492997] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 20.492998] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 20.493000] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 20.493001] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 20.493003] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 20.493004] cfg80211: Disabling freq 2484 MHz [ 20.493007] cfg80211: Regulatory domain changed to country: CN [ 20.493008] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.493010] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 20.493011] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 20.518639] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 20.518789] radeon 0000:01:00.0: >WB enabled [ 20.518792] radeon 0000:01:00.0: >fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801118afc00 [ 20.535056] [drm] ring test on 0 succeeded in 2 usecs [ 20.535216] [drm] ib test on ring 0 succeeded in 0 usecs [ 20.535516] [drm] Radeon Display Connectors [ 20.535518] [drm] Connector 0: [ 20.535519] [drm] HDMI-A-1 [ 20.535520] [drm] HPD2 [ 20.535522] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 20.535523] [drm] Encoders: [ 20.535524] [drm] DFP1: INTERNAL_UNIPHY1 [ 20.535525] [drm] Connector 1: [ 20.535527] [drm] DVI-D-1 [ 20.535528] [drm] HPD4 [ 20.535529] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 20.535530] [drm] Encoders: [ 20.535531] [drm] DFP2: INTERNAL_UNIPHY [ 20.535532] [drm] Connector 2: [ 20.535534] [drm] VGA-1 [ 20.535535] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 20.535536] [drm] Encoders: [ 20.535538] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 20.535635] [drm] Internal thermal controller with fan control [ 20.536985] [drm] radeon: power management initialized [ 20.676197] [drm] fb mappable at 0xD0142000 [ 20.676202] [drm] vram apper at 0xD0000000 [ 20.676203] [drm] size 9216000 [ 20.676204] [drm] fb depth is 24 [ 20.676205] [drm] pitch is 7680 [ 20.676380] fbcon: radeondrmfb (fb0) is primary device [ 20.676592] Console: switching to colour frame buffer device 240x75 [ 20.676634] fb0: radeondrmfb frame buffer device [ 20.676636] drm: registered panic notifier [ 20.676644] [drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0 [ 20.677923] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client [ 20.678020] snd_hda_intel 0000:01:00.1: >irq 45 for MSI/MSI-X [ 20.699416] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15 [ 20.914404] stb0899_attach: Attaching STB0899 [ 20.916186] stb6100_attach: Attaching STB6100 [ 20.918240] LNBx2x attached on addr=8 [ 20.918247] DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)... [ 20.926625] Installing spdif_bug patch: SB Audigy 2 Platinum [SB0240P] [ 21.206197] init: failsafe main process (1049) killed by TERM signal [ 21.493264] ppdev: user-space parallel port driver [ 21.510991] Bluetooth: Core ver 2.16 [ 21.511013] NET: Registered protocol family 31 [ 21.511015] Bluetooth: HCI device and connection manager initialized [ 21.511017] Bluetooth: HCI socket layer initialized [ 21.511018] Bluetooth: L2CAP socket layer initialized [ 21.511023] Bluetooth: SCO socket layer initialized [ 21.526250] type=1400 audit(1351124022.743:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1135 comm="apparmor_parser" [ 21.531855] type=1400 audit(1351124022.747:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1135 comm="apparmor_parser" [ 21.547429] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.547434] Bluetooth: BNEP filters: protocol multicast [ 21.556061] Bluetooth: RFCOMM TTY layer initialized [ 21.556072] Bluetooth: RFCOMM socket layer initialized [ 21.556073] Bluetooth: RFCOMM ver 1.11 [ 21.572706] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 21.579800] r8169 0000:03:00.0: >eth0: link down [ 21.582136] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.582522] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.696632] type=1400 audit(1351124022.915:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1179 comm="apparmor_parser" [ 21.696994] type=1400 audit(1351124022.915:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1179 comm="apparmor_parser" [ 21.699009] type=1400 audit(1351124022.915:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1180 comm="apparmor_parser" [ 21.699373] type=1400 audit(1351124022.915:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1180 comm="apparmor_parser" [ 21.700658] type=1400 audit(1351124022.919:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1181 comm="apparmor_parser" [ 21.701022] type=1400 audit(1351124022.919:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1181 comm="apparmor_parser" [ 21.702687] type=1400 audit(1351124022.919:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1182 comm="apparmor_parser" [ 21.703144] type=1400 audit(1351124022.919:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1182 comm="apparmor_parser"