[ 7.214298] init: plymouth-stop pre-start process (1219) terminated with status 1 [ 7.630576] wlan0: authenticate with 98:fc:11:61:4a:70 [ 7.642527] wlan0: send auth to 98:fc:11:61:4a:70 (try 1/3) [ 7.646515] wlan0: authenticated [ 7.664102] wlan0: associate with 98:fc:11:61:4a:70 (try 1/3) [ 7.667772] wlan0: RX AssocResp from 98:fc:11:61:4a:70 (capab=0x411 status=0 aid=2) [ 7.667889] wlan0: associated [ 7.668506] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 17.646645] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:98:fc:11:61:4a:6e:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 18.874524] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:fb:98:fc:11:61:4a:6e:08:00 SRC=192.168.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 142.679280] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:98:fc:11:61:4a:6e:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 150.974775] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:fb:98:fc:11:61:4a:6e:08:00 SRC=192.168.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 188.444136] usb 1-2: >new high-speed USB device number 5 using ehci_hcd [ 188.577153] usb 1-2: >Dual-Role OTG device on non-HNP port [ 188.577265] usb 1-2: >can't set HNP mode: -32 [ 188.692090] usb 1-2: >new high-speed USB device number 6 using ehci_hcd [ 188.825157] usb 1-2: >Dual-Role OTG device on non-HNP port [ 188.825260] usb 1-2: >can't set HNP mode: -32 [ 188.940139] usb 1-2: >new high-speed USB device number 7 using ehci_hcd [ 188.961279] usb 1-2: >Dual-Role OTG device on non-HNP port [ 188.961384] usb 1-2: >can't set HNP mode: -32 [ 189.076142] usb 1-2: >new high-speed USB device number 8 using ehci_hcd [ 189.097281] usb 1-2: >Dual-Role OTG device on non-HNP port [ 189.097376] usb 1-2: >can't set HNP mode: -32 [ 189.100491] hub 1-0:1.0: >unable to enumerate USB device on port 2 [ 189.356131] usb 2-2: >new full-speed USB device number 2 using uhci_hcd [ 189.500118] usb 2-2: >not running at top speed; connect to a high speed hub [ 189.527146] usb 2-2: >Dual-Role OTG device on non-HNP port [ 189.529137] usb 2-2: >can't set HNP mode: -32 [ 189.640171] usb 2-2: >new full-speed USB device number 3 using uhci_hcd [ 189.783104] usb 2-2: >not running at top speed; connect to a high speed hub [ 189.812139] usb 2-2: >Dual-Role OTG device on non-HNP port [ 189.814092] usb 2-2: >can't set HNP mode: -32 [ 189.924135] usb 2-2: >new full-speed USB device number 4 using uhci_hcd [ 189.955119] usb 2-2: >not running at top speed; connect to a high speed hub [ 189.981128] usb 2-2: >Dual-Role OTG device on non-HNP port [ 189.983108] usb 2-2: >can't set HNP mode: -32 [ 190.096142] usb 2-2: >new full-speed USB device number 5 using uhci_hcd [ 190.127100] usb 2-2: >not running at top speed; connect to a high speed hub [ 190.152112] usb 2-2: >Dual-Role OTG device on non-HNP port [ 190.154104] usb 2-2: >can't set HNP mode: -32 [ 190.155063] hub 2-0:1.0: >unable to enumerate USB device on port 2 [ 203.772145] usb 1-2: >new high-speed USB device number 9 using ehci_hcd [ 203.905250] usb 1-2: >Dual-Role OTG device on non-HNP port [ 203.905352] usb 1-2: >can't set HNP mode: -32 [ 204.020108] usb 1-2: >new high-speed USB device number 10 using ehci_hcd [ 204.152981] usb 1-2: >Dual-Role OTG device on non-HNP port [ 204.153101] usb 1-2: >can't set HNP mode: -32 [ 204.268160] usb 1-2: >new high-speed USB device number 11 using ehci_hcd [ 204.289232] usb 1-2: >Dual-Role OTG device on non-HNP port [ 204.289338] usb 1-2: >can't set HNP mode: -32 [ 204.404142] usb 1-2: >new high-speed USB device number 12 using ehci_hcd [ 204.425219] usb 1-2: >Dual-Role OTG device on non-HNP port [ 204.425343] usb 1-2: >can't set HNP mode: -32 [ 204.428536] hub 1-0:1.0: >unable to enumerate USB device on port 2 [ 204.684137] usb 2-2: >new full-speed USB device number 6 using uhci_hcd [ 204.828115] usb 2-2: >not running at top speed; connect to a high speed hub [ 204.853148] usb 2-2: >Dual-Role OTG device on non-HNP port [ 204.855128] usb 2-2: >can't set HNP mode: -32 [ 204.968113] usb 2-2: >new full-speed USB device number 7 using uhci_hcd [ 205.112100] usb 2-2: >not running at top speed; connect to a high speed hub [ 205.137154] usb 2-2: >Dual-Role OTG device on non-HNP port [ 205.139132] usb 2-2: >can't set HNP mode: -32 [ 205.252117] usb 2-2: >new full-speed USB device number 8 using uhci_hcd [ 205.283131] usb 2-2: >not running at top speed; connect to a high speed hub [ 205.309145] usb 2-2: >Dual-Role OTG device on non-HNP port [ 205.312100] usb 2-2: >can't set HNP mode: -32 [ 205.424128] usb 2-2: >new full-speed USB device number 9 using uhci_hcd [ 205.455121] usb 2-2: >not running at top speed; connect to a high speed hub [ 205.481122] usb 2-2: >Dual-Role OTG device on non-HNP port [ 205.483119] usb 2-2: >can't set HNP mode: -32 [ 205.484127] hub 2-0:1.0: >unable to enumerate USB device on port 2 [ 211.196148] usb 1-3: >new high-speed USB device number 13 using ehci_hcd [ 211.329237] usb 1-3: >Dual-Role OTG device on non-HNP port [ 211.329342] usb 1-3: >can't set HNP mode: -32 [ 211.444139] usb 1-3: >new high-speed USB device number 14 using ehci_hcd [ 211.576970] usb 1-3: >Dual-Role OTG device on non-HNP port [ 211.577099] usb 1-3: >can't set HNP mode: -32 [ 211.692158] usb 1-3: >new high-speed USB device number 15 using ehci_hcd [ 211.713222] usb 1-3: >Dual-Role OTG device on non-HNP port [ 211.713326] usb 1-3: >can't set HNP mode: -32 [ 211.828127] usb 1-3: >new high-speed USB device number 16 using ehci_hcd [ 211.849214] usb 1-3: >Dual-Role OTG device on non-HNP port [ 211.849329] usb 1-3: >can't set HNP mode: -32 [ 211.852470] hub 1-0:1.0: >unable to enumerate USB device on port 3 [ 212.108125] usb 3-1: >new full-speed USB device number 2 using uhci_hcd [ 212.251165] usb 3-1: >not running at top speed; connect to a high speed hub [ 212.279168] usb 3-1: >Dual-Role OTG device on non-HNP port [ 212.282167] usb 3-1: >can't set HNP mode: -32 [ 212.392100] usb 3-1: >new full-speed USB device number 3 using uhci_hcd [ 212.535162] usb 3-1: >not running at top speed; connect to a high speed hub [ 212.563155] usb 3-1: >Dual-Role OTG device on non-HNP port [ 212.566150] usb 3-1: >can't set HNP mode: -32 [ 212.676134] usb 3-1: >new full-speed USB device number 4 using uhci_hcd [ 212.707141] usb 3-1: >not running at top speed; connect to a high speed hub [ 212.733140] usb 3-1: >Dual-Role OTG device on non-HNP port [ 212.735150] usb 3-1: >can't set HNP mode: -32 [ 212.848136] usb 3-1: >new full-speed USB device number 5 using uhci_hcd [ 212.880111] usb 3-1: >not running at top speed; connect to a high speed hub [ 212.906147] usb 3-1: >Dual-Role OTG device on non-HNP port [ 212.908480] usb 3-1: >can't set HNP mode: -32 [ 212.909122] hub 3-0:1.0: >unable to enumerate USB device on port 1 [ 267.712253] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:98:fc:11:61:4a:6e:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 270.681595] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:fb:98:fc:11:61:4a:6e:08:00 SRC=192.168.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 392.641780] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:98:fc:11:61:4a:6e:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 401.553747] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:fb:98:fc:11:61:4a:6e:08:00 SRC=192.168.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 496.904086] usb 1-3: >new high-speed USB device number 17 using ehci_hcd [ 497.037131] usb 1-3: >Dual-Role OTG device on non-HNP port [ 497.037254] usb 1-3: >can't set HNP mode: -32 [ 497.152082] usb 1-3: >new high-speed USB device number 18 using ehci_hcd [ 497.285129] usb 1-3: >Dual-Role OTG device on non-HNP port [ 497.285240] usb 1-3: >can't set HNP mode: -32 [ 497.400081] usb 1-3: >new high-speed USB device number 19 using ehci_hcd [ 497.421120] usb 1-3: >Dual-Role OTG device on non-HNP port [ 497.421242] usb 1-3: >can't set HNP mode: -32 [ 497.536085] usb 1-3: >new high-speed USB device number 20 using ehci_hcd [ 497.557238] usb 1-3: >Dual-Role OTG device on non-HNP port [ 497.557352] usb 1-3: >can't set HNP mode: -32 [ 497.560470] hub 1-0:1.0: >unable to enumerate USB device on port 3 [ 497.816602] usb 3-1: >new full-speed USB device number 6 using uhci_hcd [ 497.960097] usb 3-1: >not running at top speed; connect to a high speed hub [ 497.987111] usb 3-1: >Dual-Role OTG device on non-HNP port [ 497.990107] usb 3-1: >can't set HNP mode: -32 [ 498.100113] usb 3-1: >new full-speed USB device number 7 using uhci_hcd [ 498.244089] usb 3-1: >not running at top speed; connect to a high speed hub [ 498.272092] usb 3-1: >Dual-Role OTG device on non-HNP port [ 498.275099] usb 3-1: >can't set HNP mode: -32 [ 498.388084] usb 3-1: >new full-speed USB device number 8 using uhci_hcd [ 498.420136] usb 3-1: >not running at top speed; connect to a high speed hub [ 498.448091] usb 3-1: >Dual-Role OTG device on non-HNP port [ 498.451076] usb 3-1: >can't set HNP mode: -32 [ 498.564083] usb 3-1: >new full-speed USB device number 9 using uhci_hcd [ 498.596088] usb 3-1: >not running at top speed; connect to a high speed hub [ 498.625084] usb 3-1: >Dual-Role OTG device on non-HNP port [ 498.628093] usb 3-1: >can't set HNP mode: -32 [ 498.629085] hub 3-0:1.0: >unable to enumerate USB device on port 1 [ 517.674838] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:98:fc:11:61:4a:6e:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 523.307848] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:fb:98:fc:11:61:4a:6e:08:00 SRC=192.168.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 642.707843] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:98:fc:11:61:4a:6e:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 651.002936] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:fb:98:fc:11:61:4a:6e:08:00 SRC=192.168.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 767.696326] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:98:fc:11:61:4a:6e:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 772.466828] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:fb:98:fc:11:61:4a:6e:08:00 SRC=192.168.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 892.716455] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:98:fc:11:61:4a:6e:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 899.367429] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:fb:98:fc:11:61:4a:6e:08:00 SRC=192.168.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2