[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-11-generic (buildd@crested) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009 (Ubuntu 2.6.28-11.42-generic) [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable) [ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved) [ 0.000000] BIOS-e820: 00000000d8000000 - 00000000dc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000440000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x440000 max_arch_pfn = 0x3ffffffff [ 0.000000] last_pfn = 0xbfee0 max_arch_pfn = 0x3ffffffff [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000008000 (usable) [ 0.000000] modified: 0000000000008000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000092800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bfee0000 (usable) [ 0.000000] modified: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] modified: 00000000bfee3000 - 00000000bfef0000 (ACPI data) [ 0.000000] modified: 00000000bfef0000 - 00000000bff00000 (reserved) [ 0.000000] modified: 00000000d8000000 - 00000000dc000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000440000000 (usable) [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfee0000 [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bfee0000 page 4k [ 0.000000] kernel direct mapping tables up to bfee0000 @ 10000-15000 [ 0.000000] last_map_addr: bfee0000 end: bfee0000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000440000000 [ 0.000000] 0100000000 - 0440000000 page 2M [ 0.000000] kernel direct mapping tables up to 440000000 @ 13000-25000 [ 0.000000] last_map_addr: 440000000 end: 440000000 [ 0.000000] RAMDISK: 7f835000 - 7ffff0cd [ 0.000000] ACPI: RSDP 000F6D50, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT BFEE3040, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: FACP BFEE30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: DSDT BFEE3180, 4D7D (r1 GBT GBTUACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS BFEE0000, 0040 [ 0.000000] ACPI: HPET BFEE8040, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) [ 0.000000] ACPI: MCFG BFEE80C0, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: TAMG BFEE8100, 64B2 (r1 GBT GBT B0 5455312E BG 20101) [ 0.000000] ACPI: APIC BFEE7F40, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: SSDT BFEEEEE0, 03AB (r1 PmRef CpuPm 3000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0440000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000b854b0] TEXT DATA BSS ==> [0000200000 - 0000b854b0] [ 0.000000] #3 [007f835000 - 007ffff0cd] RAMDISK ==> [007f835000 - 007ffff0cd] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #6 [0000013000 - 0000020000] PGTABLE ==> [0000013000 - 0000020000] [ 0.000000] found SMP MP-table at [ffff8800000f5340] 000f5340 [ 0.000000] [ffffe20000000000-ffffe2000edfffff] PMD -> [ffff880028200000-ffff880036ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00440000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[5] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x00000008 [ 0.000000] 0: 0x00000010 -> 0x00000092 [ 0.000000] 0: 0x00000100 -> 0x000bfee0 [ 0.000000] 0: 0x00100000 -> 0x00440000 [ 0.000000] On node 0 totalpages: 4193893 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2554 pages reserved [ 0.000000] DMA zone: 1363 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767768 pages, LIFO batch:31 [ 0.000000] Normal zone: 46592 pages used for memmap [ 0.000000] Normal zone: 3361280 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000008000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee3000 [ 0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000bfef0000 [ 0.000000] PM: Registered nosave memory: 00000000bfef0000 - 00000000bff00000 [ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000d8000000 [ 0.000000] PM: Registered nosave memory: 00000000d8000000 - 00000000dc000000 [ 0.000000] PM: Registered nosave memory: 00000000dc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: dc000000:22c00000) [ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4130411 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2752.782 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.004000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004000] allocated 178257920 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.004000] Placing software IO TLB between 0x20000000 - 0x24000000 [ 0.004000] Memory: 16247960k/17825792k available (4760k kernel code, 1050220k absent, 526696k reserved, 2540k data, 536k init) [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5505.56 BogoMIPS (lpj=11011128) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] ACPI: Core revision 20080926 [ 0.004000] ACPI: Checking initramfs for custom DSDT [ 0.252033] Setting APIC routing to flat [ 0.252363] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.292379] CPU0: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 [ 0.296001] Booting processor 1 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5505.63 BogoMIPS (lpj=11011270) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.380519] CPU1: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 [ 0.380536] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.384062] Booting processor 2 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 5505.59 BogoMIPS (lpj=11011195) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.472433] CPU2: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 [ 0.472450] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.476085] Booting processor 3 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 5505.60 BogoMIPS (lpj=11011216) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.564468] CPU3: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 [ 0.564484] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.568017] Brought up 4 CPUs [ 0.568019] Total of 4 processors activated (22022.40 BogoMIPS). [ 0.568064] CPU0 attaching sched-domain: [ 0.568066] domain 0: span 0,2 level MC [ 0.568067] groups: 0 2 [ 0.568069] domain 1: span 0-3 level CPU [ 0.568071] groups: 0,2 1,3 [ 0.568079] CPU1 attaching sched-domain: [ 0.568080] domain 0: span 1,3 level MC [ 0.568081] groups: 1 3 [ 0.568083] domain 1: span 0-3 level CPU [ 0.568084] groups: 1,3 0,2 [ 0.568088] CPU2 attaching sched-domain: [ 0.568089] domain 0: span 0,2 level MC [ 0.568090] groups: 2 0 [ 0.568092] domain 1: span 0-3 level CPU [ 0.568093] groups: 0,2 1,3 [ 0.568095] CPU3 attaching sched-domain: [ 0.568096] domain 0: span 1,3 level MC [ 0.568097] groups: 3 1 [ 0.568099] domain 1: span 0-3 level CPU [ 0.568100] groups: 1,3 0,2 [ 0.568185] net_namespace: 1400 bytes [ 0.568185] Booting paravirtualized kernel on bare hardware [ 0.568208] Time: 21:54:02 Date: 07/27/12 [ 0.568208] regulator: core version 0.5 [ 0.568208] NET: Registered protocol family 16 [ 0.568208] ACPI: bus type pci registered [ 0.568208] PCI: MCFG configuration 0: base d8000000 segment 0 buses 0 - 63 [ 0.568208] PCI: MCFG area at d8000000 reserved in E820 [ 0.570024] PCI: Using MMCONFIG at d8000000 - dbffffff [ 0.570025] PCI: Using configuration type 1 for base access [ 0.572417] ACPI: EC: Look up EC in DSDT [ 0.576338] ACPI: Interpreter enabled [ 0.576340] ACPI: (supports S0 S3 S4 S5) [ 0.576352] ACPI: Using IOAPIC for interrupt routing [ 0.580337] ACPI: No dock devices found. [ 0.580344] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.580401] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.580403] pci 0000:00:01.0: PME# disabled [ 0.580455] pci 0000:00:1a.0: reg 20 io port: [0xff00-0xff1f] [ 0.580502] pci 0000:00:1a.1: reg 20 io port: [0xfe00-0xfe1f] [ 0.580558] pci 0000:00:1a.2: reg 20 io port: [0xfd00-0xfd1f] [ 0.580606] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdffff000-0xdffff3ff] [ 0.580661] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdfff8000-0xdfffbfff] [ 0.580682] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.580685] pci 0000:00:1b.0: PME# disabled [ 0.580718] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.580720] pci 0000:00:1c.0: PME# disabled [ 0.580757] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.580759] pci 0000:00:1c.4: PME# disabled [ 0.580793] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.580796] pci 0000:00:1c.5: PME# disabled [ 0.580836] pci 0000:00:1d.0: reg 20 io port: [0xfc00-0xfc1f] [ 0.580883] pci 0000:00:1d.1: reg 20 io port: [0xfb00-0xfb1f] [ 0.580929] pci 0000:00:1d.2: reg 20 io port: [0xfa00-0xfa1f] [ 0.580969] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdfffe000-0xdfffe3ff] [ 0.581109] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.581113] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.581117] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.581120] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.581124] pci 0000:00:1f.2: reg 20 io port: [0xf900-0xf90f] [ 0.581128] pci 0000:00:1f.2: reg 24 io port: [0xf800-0xf80f] [ 0.581155] pci 0000:00:1f.3: reg 10 64bit mmio: [0xdfffd000-0xdfffd0ff] [ 0.581165] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.581195] pci 0000:00:1f.5: reg 10 io port: [0xf600-0xf607] [ 0.581199] pci 0000:00:1f.5: reg 14 io port: [0xf500-0xf503] [ 0.581203] pci 0000:00:1f.5: reg 18 io port: [0xf400-0xf407] [ 0.581207] pci 0000:00:1f.5: reg 1c io port: [0xf300-0xf303] [ 0.581211] pci 0000:00:1f.5: reg 20 io port: [0xf200-0xf20f] [ 0.581215] pci 0000:00:1f.5: reg 24 io port: [0xf100-0xf10f] [ 0.581248] pci 0000:01:00.0: reg 10 64bit mmio: [0xc0000000-0xcfffffff] [ 0.581255] pci 0000:01:00.0: reg 18 64bit mmio: [0xdfcc0000-0xdfcdffff] [ 0.581259] pci 0000:01:00.0: reg 20 io port: [0xee00-0xeeff] [ 0.581265] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.581270] pci 0000:01:00.0: supports D1 D2 [ 0.581294] pci 0000:01:00.1: reg 10 64bit mmio: [0xdfcfc000-0xdfcfffff] [ 0.581312] pci 0000:01:00.1: supports D1 D2 [ 0.581344] pci 0000:00:01.0: bridge io port: [0xe000-0xefff] [ 0.581346] pci 0000:00:01.0: bridge 32bit mmio: [0xdfc00000-0xdfcfffff] [ 0.581349] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.581427] pci 0000:03:00.0: reg 10 io port: [0xdf00-0xdf07] [ 0.581435] pci 0000:03:00.0: reg 14 io port: [0xde00-0xde03] [ 0.581442] pci 0000:03:00.0: reg 18 io port: [0xdd00-0xdd07] [ 0.581450] pci 0000:03:00.0: reg 1c io port: [0xdc00-0xdc03] [ 0.581457] pci 0000:03:00.0: reg 20 io port: [0xdb00-0xdb0f] [ 0.581515] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] [ 0.581518] pci 0000:00:1c.4: bridge 32bit mmio: [0xdfb00000-0xdfbfffff] [ 0.581558] pci 0000:04:00.0: reg 10 io port: [0xce00-0xceff] [ 0.581575] pci 0000:04:00.0: reg 18 64bit mmio: [0xdfdff000-0xdfdfffff] [ 0.581587] pci 0000:04:00.0: reg 20 64bit mmio: [0xdfdf8000-0xdfdfbfff] [ 0.581593] pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.581602] pci 0000:04:00.0: supports D1 D2 [ 0.581603] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.581607] pci 0000:04:00.0: PME# disabled [ 0.581648] pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff] [ 0.581651] pci 0000:00:1c.5: bridge 32bit mmio: [0xdfe00000-0xdfefffff] [ 0.581655] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xdfd00000-0xdfdfffff] [ 0.581692] pci 0000:00:1e.0: transparent bridge [ 0.581713] bus 00 -> node 0 [ 0.581716] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.581891] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.581961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.582030] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 0.582095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.593454] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.593534] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.593613] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.593692] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.593771] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.593851] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.593930] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.594009] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.595724] ACPI Warning (tbutils-0217): Incorrect checksum in table [TAMG] - B9, should be B8 [20080926] [ 0.595753] ACPI: WMI: Mapper loaded [ 0.595778] SCSI subsystem initialized [ 0.596033] libata version 3.00 loaded. [ 0.596034] usbcore: registered new interface driver usbfs [ 0.596044] usbcore: registered new interface driver hub [ 0.596052] usbcore: registered new device driver usb [ 0.596053] PCI: Using ACPI for IRQ routing [ 0.608009] Bluetooth: Core ver 2.13 [ 0.608022] NET: Registered protocol family 31 [ 0.608022] Bluetooth: HCI device and connection manager initialized [ 0.608022] Bluetooth: HCI socket layer initialized [ 0.608022] NET: Registered protocol family 8 [ 0.608022] NET: Registered protocol family 20 [ 0.608028] NetLabel: Initializing [ 0.608030] NetLabel: domain hash size = 128 [ 0.608031] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.608042] NetLabel: unlabeled traffic allowed by default [ 0.608089] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.608092] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.616064] AppArmor: AppArmor Filesystem Enabled [ 0.620007] Switched to high resolution mode on CPU 0 [ 0.620472] Switched to high resolution mode on CPU 2 [ 0.620517] Switched to high resolution mode on CPU 3 [ 0.620574] Switched to high resolution mode on CPU 1 [ 0.628008] pnp: PnP ACPI init [ 0.628015] ACPI: bus type pnp registered [ 0.630099] pnp: PnP ACPI: found 15 devices [ 0.630101] ACPI: ACPI bus type pnp unregistered [ 0.630106] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.630108] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.630109] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.630111] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.630112] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.630117] system 00:0b: ioport range 0x400-0x47f has been reserved [ 0.630119] system 00:0b: ioport range 0x580-0x5ff has been reserved [ 0.630122] system 00:0c: iomem range 0xd8000000-0xdbffffff has been reserved [ 0.630126] system 00:0d: iomem range 0xf0000-0xf3fff could not be reserved [ 0.630128] system 00:0d: iomem range 0xf4000-0xf7fff could not be reserved [ 0.630129] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 0.630131] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 0.630132] system 00:0d: iomem range 0xbfee0000-0xbfeeffff could not be reserved [ 0.630134] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.630135] system 00:0d: iomem range 0x100000-0xbfedffff could not be reserved [ 0.630137] system 00:0d: iomem range 0xbfef0000-0xbfefffff has been reserved [ 0.630138] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.630140] system 00:0d: iomem range 0xfed10000-0xfed1dfff has been reserved [ 0.630142] system 00:0d: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.630143] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.630145] system 00:0d: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.630146] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved [ 0.630148] system 00:0d: iomem range 0xe0000-0xeffff has been reserved [ 0.634757] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.634759] pci 0000:00:01.0: IO window: 0xe000-0xefff [ 0.634762] pci 0000:00:01.0: MEM window: 0xdfc00000-0xdfcfffff [ 0.634763] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.634766] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.634767] pci 0000:00:1c.0: IO window: disabled [ 0.634770] pci 0000:00:1c.0: MEM window: disabled [ 0.634773] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.634777] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.634779] pci 0000:00:1c.4: IO window: 0xd000-0xdfff [ 0.634782] pci 0000:00:1c.4: MEM window: 0xdfb00000-0xdfbfffff [ 0.634784] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.634788] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 [ 0.634790] pci 0000:00:1c.5: IO window: 0xc000-0xcfff [ 0.634793] pci 0000:00:1c.5: MEM window: 0xdfe00000-0xdfefffff [ 0.634796] pci 0000:00:1c.5: PREFETCH window: 0x000000dfd00000-0x000000dfdfffff [ 0.634800] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.634801] pci 0000:00:1e.0: IO window: disabled [ 0.634804] pci 0000:00:1e.0: MEM window: disabled [ 0.634806] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.634814] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.634817] pci 0000:00:01.0: setting latency timer to 64 [ 0.634821] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.634825] pci 0000:00:1c.0: setting latency timer to 64 [ 0.634829] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.634832] pci 0000:00:1c.4: setting latency timer to 64 [ 0.634837] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.634839] pci 0000:00:1c.5: setting latency timer to 64 [ 0.634844] pci 0000:00:1e.0: setting latency timer to 64 [ 0.634847] bus: 00 index 0 io port: [0x00-0xffff] [ 0.634848] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.634849] bus: 01 index 0 io port: [0xe000-0xefff] [ 0.634850] bus: 01 index 1 mmio: [0xdfc00000-0xdfcfffff] [ 0.634851] bus: 01 index 2 mmio: [0xc0000000-0xcfffffff] [ 0.634853] bus: 01 index 3 mmio: [0x0-0x0] [ 0.634854] bus: 02 index 0 mmio: [0x0-0x0] [ 0.634855] bus: 02 index 1 mmio: [0x0-0x0] [ 0.634855] bus: 02 index 2 mmio: [0x0-0x0] [ 0.634856] bus: 02 index 3 mmio: [0x0-0x0] [ 0.634857] bus: 03 index 0 io port: [0xd000-0xdfff] [ 0.634858] bus: 03 index 1 mmio: [0xdfb00000-0xdfbfffff] [ 0.634860] bus: 03 index 2 mmio: [0x0-0x0] [ 0.634860] bus: 03 index 3 mmio: [0x0-0x0] [ 0.634861] bus: 04 index 0 io port: [0xc000-0xcfff] [ 0.634863] bus: 04 index 1 mmio: [0xdfe00000-0xdfefffff] [ 0.634864] bus: 04 index 2 mmio: [0xdfd00000-0xdfdfffff] [ 0.634865] bus: 04 index 3 mmio: [0x0-0x0] [ 0.634866] bus: 05 index 0 mmio: [0x0-0x0] [ 0.634867] bus: 05 index 1 mmio: [0x0-0x0] [ 0.634868] bus: 05 index 2 mmio: [0x0-0x0] [ 0.634869] bus: 05 index 3 io port: [0x00-0xffff] [ 0.634870] bus: 05 index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.634875] NET: Registered protocol family 2 [ 0.668051] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.668884] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.670079] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.670423] TCP: Hash tables configured (established 262144 bind 65536) [ 0.670424] TCP reno registered [ 0.680092] NET: Registered protocol family 1 [ 0.680174] checking if image is initramfs... it is [ 1.182677] Freeing initrd memory: 7976k freed [ 1.184973] audit: initializing netlink socket (disabled) [ 1.184985] type=2000 audit(1343426042.184:1): initialized [ 1.191565] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.192468] VFS: Disk quotas dquot_6.5.1 [ 1.192502] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.192891] fuse init (API version 7.10) [ 1.192939] msgmni has been set to 31751 [ 1.193116] alg: No test for stdrng (krng) [ 1.193130] io scheduler noop registered [ 1.193136] io scheduler anticipatory registered [ 1.193137] io scheduler deadline registered [ 1.193162] io scheduler cfq registered (default) [ 1.224017] pci 0000:01:00.0: Boot video device [ 1.225795] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 1.225814] pcieport-driver 0000:00:01.0: found MSI capability [ 1.225827] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X [ 1.225833] pci_express 0000:00:01.0:pcie00: allocate port service [ 1.225842] pci_express 0000:00:01.0:pcie03: allocate port service [ 1.225870] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.225893] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.225911] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X [ 1.225919] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.225927] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.225935] pci_express 0000:00:1c.0:pcie03: allocate port service [ 1.225973] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 1.225996] pcieport-driver 0000:00:1c.4: found MSI capability [ 1.226012] pcieport-driver 0000:00:1c.4: irq 2301 for MSI/MSI-X [ 1.226020] pci_express 0000:00:1c.4:pcie00: allocate port service [ 1.226028] pci_express 0000:00:1c.4:pcie02: allocate port service [ 1.226035] pci_express 0000:00:1c.4:pcie03: allocate port service [ 1.226072] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 1.226095] pcieport-driver 0000:00:1c.5: found MSI capability [ 1.226112] pcieport-driver 0000:00:1c.5: irq 2300 for MSI/MSI-X [ 1.226119] pci_express 0000:00:1c.5:pcie00: allocate port service [ 1.226127] pci_express 0000:00:1c.5:pcie02: allocate port service [ 1.226134] pci_express 0000:00:1c.5:pcie03: allocate port service [ 1.226178] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.226381] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.226469] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.226471] ACPI: Power Button (FF) [PWRF] [ 1.226498] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.226500] ACPI: Power Button (CM) [PWRB] [ 1.226819] ACPI: SSDT BFEEE600, 022A (r1 PmRef Cpu0Ist 3000 INTL 20040311) [ 1.226975] ACPI: CPU0 (power states: C1[C1] C3[C3]) [ 1.226999] processor ACPI_CPU:00: registered as cooling_device0 [ 1.227003] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.227199] ACPI: SSDT BFEEEAC0, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20040311) [ 1.227350] ACPI: CPU1 (power states: C1[C1] C3[C3]) [ 1.227367] processor ACPI_CPU:01: registered as cooling_device1 [ 1.227370] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.227541] ACPI: SSDT BFEEEC20, 0152 (r1 PmRef Cpu2Ist 3000 INTL 20040311) [ 1.227687] ACPI: CPU2 (power states: C1[C1] C3[C3]) [ 1.227706] processor ACPI_CPU:02: registered as cooling_device2 [ 1.227708] ACPI: Processor [CPU2] (supports 8 throttling states) [ 1.227883] ACPI: SSDT BFEEED80, 0152 (r1 PmRef Cpu3Ist 3000 INTL 20040311) [ 1.228029] ACPI: CPU3 (power states: C1[C1] C3[C3]) [ 1.228042] processor ACPI_CPU:03: registered as cooling_device3 [ 1.228045] ACPI: Processor [CPU3] (supports 8 throttling states) [ 1.257650] Linux agpgart interface v0.103 [ 1.257655] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.257730] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.257953] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.258443] brd: module loaded [ 1.258638] loop: module loaded [ 1.258679] Fixed MDIO Bus: probed [ 1.258682] PPP generic driver version 2.4.2 [ 1.258717] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.258735] Driver 'sd' needs updating - please use bus_type methods [ 1.258740] Driver 'sr' needs updating - please use bus_type methods [ 1.258784] ata_piix 0000:00:1f.2: version 2.12 [ 1.258793] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.258795] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.258821] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.258916] scsi0 : ata_piix [ 1.259014] scsi1 : ata_piix [ 1.259463] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14 [ 1.259467] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15 [ 2.052051] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.052060] ata1.01: SATA link down (SStatus 0 SControl 300) [ 2.082793] ata1.00: ATA-7: WDC WD3200AAKS-00SBA0, 12.01B01, max UDMA/133 [ 2.082795] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.096770] ata1.00: configured for UDMA/133 [ 2.892050] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.892060] ata2.01: SATA link down (SStatus 0 SControl 300) [ 2.916731] ata2.00: ATA-7: WDC WD3200AAKS-00SBA0, 12.01B01, max UDMA/133 [ 2.916733] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.932996] ata2.00: configured for UDMA/133 [ 2.933090] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5 [ 2.933148] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 2.933160] sd 0:0:0:0: [sda] Write Protect is off [ 2.933161] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.933178] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.933216] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 2.933226] sd 0:0:0:0: [sda] Write Protect is off [ 2.933227] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.933244] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.933246] sda: sda1 [ 2.938408] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.938438] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.938478] scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5 [ 2.938527] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 2.938537] sd 1:0:0:0: [sdb] Write Protect is off [ 2.938538] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.938555] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.938587] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 2.938597] sd 1:0:0:0: [sdb] Write Protect is off [ 2.938598] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.938615] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.938617] sdb: sdb1 [ 2.947342] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.947371] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.947384] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.947386] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 2.947408] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 2.947491] scsi2 : ata_piix [ 2.947570] scsi3 : ata_piix [ 2.948016] ata3: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf200 irq 19 [ 2.948018] ata4: SATA max UDMA/133 cmd 0xf400 ctl 0xf300 bmdma 0xf208 irq 19 [ 3.424040] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.432358] ata3.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133 [ 3.432361] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.440388] ata3.00: configured for UDMA/133 [ 3.916035] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.924302] ata4.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133 [ 3.924304] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.932314] ata4.00: configured for UDMA/133 [ 3.932375] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5 [ 3.932435] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB) [ 3.932445] sd 2:0:0:0: [sdc] Write Protect is off [ 3.932446] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.932463] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.932499] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB) [ 3.932523] sd 2:0:0:0: [sdc] Write Protect is off [ 3.932525] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.932541] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.932543] sdc: sdc1 sdc2 sdc3 [ 4.372874] sd 2:0:0:0: [sdc] Attached SCSI disk [ 4.372914] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 4.372977] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5 [ 4.373035] sd 3:0:0:0: [sdd] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB) [ 4.373045] sd 3:0:0:0: [sdd] Write Protect is off [ 4.373047] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 4.373064] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.373102] sd 3:0:0:0: [sdd] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB) [ 4.373111] sd 3:0:0:0: [sdd] Write Protect is off [ 4.373113] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 4.373129] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.373131] sdd: sdd1 sdd2 sdd3 [ 4.722751] sd 3:0:0:0: [sdd] Attached SCSI disk [ 4.722774] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 4.722996] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.723017] pata_jmicron 0000:03:00.0: setting latency timer to 64 [ 4.723094] scsi4 : pata_jmicron [ 4.723165] scsi5 : pata_jmicron [ 4.723610] ata5: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16 [ 4.723612] ata6: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16 [ 4.884550] ata5.01: ATAPI: HL-DT-STDVD-RAM GH22LP21, 1.10, max UDMA/66 [ 4.900559] ata5.01: configured for UDMA/66 [ 5.057186] scsi 4:0:1:0: CD-ROM HL-DT-ST DVD-RAM GH22LP21 1.10 PQ: 0 ANSI: 5 [ 5.058894] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.058897] Uniform CD-ROM driver Revision: 3.20 [ 5.058977] sr 4:0:1:0: Attached scsi CD-ROM sr0 [ 5.059007] sr 4:0:1:0: Attached scsi generic sg4 type 5 [ 5.059191] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.059204] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.059227] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 5.059229] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 5.059264] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 5.063162] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 5.063171] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xdffff000 [ 5.077507] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 5.077556] usb usb1: configuration #1 chosen from 1 choice [ 5.077576] hub 1-0:1.0: USB hub found [ 5.077581] hub 1-0:1.0: 6 ports detected [ 5.077651] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.077658] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 5.077660] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.077686] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 5.081568] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 5.081576] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdfffe000 [ 5.096007] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 5.096046] usb usb2: configuration #1 chosen from 1 choice [ 5.096065] hub 2-0:1.0: USB hub found [ 5.096069] hub 2-0:1.0: 6 ports detected [ 5.096133] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.096141] uhci_hcd: USB Universal Host Controller Interface driver [ 5.096156] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.096160] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 5.096162] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 5.096189] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 5.096207] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 5.096251] usb usb3: configuration #1 chosen from 1 choice [ 5.096266] hub 3-0:1.0: USB hub found [ 5.096270] hub 3-0:1.0: 2 ports detected [ 5.096321] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 5.096325] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 5.096326] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 5.096353] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 5.096375] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 5.096419] usb usb4: configuration #1 chosen from 1 choice [ 5.096433] hub 4-0:1.0: USB hub found [ 5.096437] hub 4-0:1.0: 2 ports detected [ 5.096486] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.096490] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 5.096492] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 5.096516] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 5.096534] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00 [ 5.096578] usb usb5: configuration #1 chosen from 1 choice [ 5.096594] hub 5-0:1.0: USB hub found [ 5.096597] hub 5-0:1.0: 2 ports detected [ 5.096652] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.096656] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.096657] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.096682] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 5.096699] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 5.096744] usb usb6: configuration #1 chosen from 1 choice [ 5.096758] hub 6-0:1.0: USB hub found [ 5.096763] hub 6-0:1.0: 2 ports detected [ 5.096813] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.096817] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5.096819] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.096845] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 5.096863] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 5.096907] usb usb7: configuration #1 chosen from 1 choice [ 5.096923] hub 7-0:1.0: USB hub found [ 5.096926] hub 7-0:1.0: 2 ports detected [ 5.096981] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.096985] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 5.096987] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.097012] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 5.097030] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 5.097077] usb usb8: configuration #1 chosen from 1 choice [ 5.097091] hub 8-0:1.0: USB hub found [ 5.097094] hub 8-0:1.0: 2 ports detected [ 5.097174] usbcore: registered new interface driver libusual [ 5.097193] usbcore: registered new interface driver usbserial [ 5.097198] USB Serial support registered for generic [ 5.097209] usbcore: registered new interface driver usbserial_generic [ 5.097210] usbserial: USB Serial Driver core [ 5.097236] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 5.097237] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 5.097282] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.105529] mice: PS/2 mouse device common for all mice [ 5.141543] rtc_cmos 00:04: RTC can wake from S4 [ 5.141569] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 5.141594] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 5.141630] device-mapper: uevent: version 1.0.3 [ 5.141704] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 5.141985] device-mapper: multipath: version 1.0.5 loaded [ 5.141987] device-mapper: multipath round-robin: version 1.0.0 loaded [ 5.142323] cpuidle: using governor ladder [ 5.142401] cpuidle: using governor menu [ 5.142657] TCP cubic registered [ 5.142697] NET: Registered protocol family 10 [ 5.142949] lo: Disabled Privacy Extensions [ 5.143127] NET: Registered protocol family 17 [ 5.143137] Bluetooth: L2CAP ver 2.11 [ 5.143138] Bluetooth: L2CAP socket layer initialized [ 5.143140] Bluetooth: SCO (Voice Link) ver 0.6 [ 5.143141] Bluetooth: SCO socket layer initialized [ 5.143209] Bluetooth: RFCOMM socket layer initialized [ 5.143212] Bluetooth: RFCOMM TTY layer initialized [ 5.143213] Bluetooth: RFCOMM ver 1.10 [ 5.145599] registered taskstats version 1 [ 5.145682] Magic number: 4:156:956 [ 5.145742] rtc_cmos 00:04: setting system clock to 2012-07-27 21:54:07 UTC (1343426047) [ 5.145743] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 5.145744] EDD information not available. [ 5.145774] Freeing unused kernel memory: 536k freed [ 5.145879] Write protecting the kernel read-only data: 6708k [ 5.160360] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 5.256428] Floppy drive(s): fd0 is 1.44M [ 5.275950] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 5.275970] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.275995] r8169 0000:04:00.0: setting latency timer to 64 [ 5.276034] FDC 0 is a post-1991 82077 [ 5.276089] r8169 0000:04:00.0: irq 2299 for MSI/MSI-X [ 5.276472] eth0: RTL8168d/8111d at 0xffffc20000064000, 50:e5:49:53:f4:22, XID 283000c0 IRQ 2299 [ 5.389547] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 5.520417] usb 1-1: configuration #1 chosen from 1 choice [ 5.520538] hub 1-1:1.0: USB hub found [ 5.520615] hub 1-1:1.0: 3 ports detected [ 5.984007] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 6.190458] usb 4-1: configuration #1 chosen from 1 choice [ 6.198448] usbcore: registered new interface driver hiddev [ 6.213482] input: WALTOP International Corp. Slim Tablet as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input4 [ 6.253540] generic-usb 0003:172F:0034.0001: input,hidraw0: USB HID v1.10 Mouse [WALTOP International Corp. Slim Tablet] on usb-0000:00:1a.1-1/input0 [ 6.253551] usbcore: registered new interface driver usbhid [ 6.253553] usbhid: v2.6:USB HID core driver [ 6.433515] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 6.754776] usb 5-2: configuration #1 chosen from 1 choice [ 6.761635] input: Shure Incorporated Shure Digital as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.3/input/input5 [ 6.792546] generic-usb 0003:14ED:29B6.0002: input,hidraw1: USB HID v1.00 Device [Shure Incorporated Shure Digital ] on usb-0000:00:1a.2-2/input3 [ 6.864138] usb 1-1.1: new high speed USB device using ehci_hcd and address 5 [ 6.957302] usb 1-1.1: configuration #1 chosen from 1 choice [ 6.957539] hub 1-1.1:1.0: USB hub found [ 6.957882] hub 1-1.1:1.0: 4 ports detected [ 7.028141] usb 1-1.2: new low speed USB device using ehci_hcd and address 6 [ 7.124551] usb 1-1.2: configuration #1 chosen from 1 choice [ 7.128520] input: USB Laser Wheel Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.0/input/input6 [ 7.156069] generic-usb 0003:1BCF:000A.0003: input,hiddev96,hidraw2: USB HID v1.11 Mouse [USB Laser Wheel Mouse] on usb-0000:00:1a.7-1.2/input0 [ 7.232145] usb 1-1.3: new low speed USB device using ehci_hcd and address 7 [ 7.330809] usb 1-1.3: configuration #1 chosen from 1 choice [ 7.346441] generic-usb 0003:05AC:921D.0004: hiddev97,hidraw3: USB HID v1.11 Device [Apple Cinema Display] on usb-0000:00:1a.7-1.3/input0 [ 7.416769] usb 1-1.1.2: new high speed USB device using ehci_hcd and address 8 [ 7.510825] usb 1-1.1.2: configuration #1 chosen from 1 choice [ 12.525998] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 12.562122] ISO 9660 Extensions: RRIP_1991A [ 12.813342] aufs 20080922 [ 13.049641] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 17.508158] /build/buildd/linux-2.6.28/drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed [ 17.508171] generic-usb 0003:1778:0204.0005: timeout initializing reports [ 17.508238] generic-usb 0003:1778:0204.0005: hiddev98,hidraw4: USB HID v1.10 Device [IPEVO corp IPEVO Point 2 View] on usb-0000:00:1a.7-1.1.2/input2 [ 17.584291] usb 1-1.1.3: new high speed USB device using ehci_hcd and address 9 [ 17.947099] usb 1-1.1.3: configuration #1 chosen from 1 choice [ 60.264825] udev: starting version 141 [ 60.458423] iTCO_vendor_support: vendor-support=0 [ 60.778051] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 61.096092] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 61.096160] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0460) [ 61.096205] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 61.160120] parport_pc 00:09: reported by Plug and Play ACPI [ 61.160165] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 62.152113] Linux video capture interface: v2.00 [ 62.229425] ppdev: user-space parallel port driver [ 62.291260] uvcvideo: Found UVC 1.00 device IPEVO Point 2 View (1778:0204) [ 62.291865] input: IPEVO Point 2 View as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input8 [ 62.304117] uvcvideo: Found UVC 1.00 device (046d:0821) [ 62.308781] input: UVC Camera (046d:0821) as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.2/input/input9 [ 62.317063] usbcore: registered new interface driver uvcvideo [ 62.317081] USB Video Class driver (v0.1.0) [ 62.790803] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 62.790879] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 62.837402] usbcore: registered new interface driver snd-usb-audio [ 62.869901] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 62.869944] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 72.259050] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 72.259052] Bluetooth: BNEP filters: protocol multicast [ 72.329597] Bridge firewalling registered [ 80.557953] lp0: using parport0 (interrupt-driven). [ 81.647817] r8169: eth0: link up [ 81.647825] r8169: eth0: link up [ 83.134553] usbcore: registered new interface driver wacom [ 83.134991] wacom: v1.49:USB Wacom Graphire and Wacom Intuos tablet driver [ 91.949006] eth0: no IPv6 routers present [ 137.528009] usb 2-2: new high speed USB device using ehci_hcd and address 2 [ 137.661109] usb 2-2: configuration #1 chosen from 1 choice [ 138.023375] Initializing USB Mass Storage driver... [ 138.023515] scsi6 : SCSI emulation for USB Mass Storage devices [ 138.023578] usb-storage: device found at 2 [ 138.023580] usb-storage: waiting for device to settle before scanning [ 138.023577] usbcore: registered new interface driver usb-storage [ 138.023580] USB Mass Storage support registered. [ 143.020134] usb-storage: device scan complete [ 143.020576] scsi 6:0:0:0: Direct-Access CBM Flash Disk 5.00 PQ: 0 ANSI: 2 [ 143.021754] sd 6:0:0:0: [sde] 2040832 512-byte hardware sectors: (1.04 GB/996 MiB) [ 143.023964] sd 6:0:0:0: [sde] Write Protect is off [ 143.023966] sd 6:0:0:0: [sde] Mode Sense: 0b 00 00 08 [ 143.023967] sd 6:0:0:0: [sde] Assuming drive cache: write through [ 143.025595] sd 6:0:0:0: [sde] 2040832 512-byte hardware sectors: (1.04 GB/996 MiB) [ 143.026318] sd 6:0:0:0: [sde] Write Protect is off [ 143.026319] sd 6:0:0:0: [sde] Mode Sense: 0b 00 00 08 [ 143.026321] sd 6:0:0:0: [sde] Assuming drive cache: write through [ 143.026323] sde: sde1 [ 143.027763] sd 6:0:0:0: [sde] Attached SCSI removable disk [ 143.027882] sd 6:0:0:0: Attached scsi generic sg5 type 0