[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.12.0-7-generic (buildd@aatxe) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-8ubuntu1) ) #15-Ubuntu SMP Sun Dec 8 23:39:27 UTC 2013 (Ubuntu 3.12.0-7.15-generic 3.12.4) [ 0.000000] Command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf67ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf680000-0x00000000bf68ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf690000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: FUJITSU SIEMENS ESPRIMO Mobile U9200/S11D, BIOS 1.11 - 067 - 1566 04/22/2008 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 000000000 mask E00000000 write-back [ 0.000000] 2 base 200000000 mask FC0000000 write-back [ 0.000000] 3 base 0BF700000 mask FFFF00000 uncachable [ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 3GB, range: 1GB, type UC [ 0.000000] reg 1, base: 0GB, range: 8GB, type WB [ 0.000000] reg 2, base: 8GB, range: 1GB, type WB [ 0.000000] reg 3, base: 3063MB, range: 1MB, type UC [ 0.000000] reg 4, base: 3064MB, range: 8MB, type UC [ 0.000000] total RAM covered: 8183M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 6 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3063MB, range: 1MB, type UC [ 0.000000] reg 3, base: 3064MB, range: 8MB, type UC [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB [ 0.000000] reg 5, base: 8GB, range: 1GB, type WB [ 0.000000] e820: update [mem 0xbf700000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf680 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f77a0-0x000f77af] mapped at [ffff8800000f77a0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE [ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE [ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff] [ 0.000000] [mem 0x23fe00000-0x23fffffff] page 2M [ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff] [ 0.000000] [mem 0x23c000000-0x23fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff] [ 0.000000] [mem 0x200000000-0x23bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf67ffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M [ 0.000000] [mem 0xbf600000-0xbf67ffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE [ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x7eca5000-0x7fffffff] [ 0.000000] ACPI: RSDP 00000000000f7710 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 00000000bf686fbb 0008C (v01 FSC PC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bf68ed0c 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 00000000bf688502 06796 (v02 IEC___ S11_____ 06040000 INTL 20050624) [ 0.000000] ACPI: FACS 00000000bf68ffc0 00040 [ 0.000000] ACPI: APIC 00000000bf68ee00 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: HPET 00000000bf68ee68 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 00000000bf68eea0 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: SLIT 00000000bf68eedc 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: TCPA 00000000bf68ef18 00032 (v01 Intel CRESTLN 06040000 00005A52) [ 0.000000] ACPI: TMOR 00000000bf68ef4a 00026 (v01 PTLTD 06040000 PTL 00000003) [ 0.000000] ACPI: APIC 00000000bf68ef70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bf68efd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 00000000bf688225 002DD (v01 SataRe SataAhci 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bf6875d3 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bf68752d 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bf687047 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff] [ 0.000000] NODE_DATA [mem 0x23fff6000-0x23fffafff] [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x23fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xbf67ffff] [ 0.000000] node 0: [mem 0x100000000-0x23fffffff] [ 0.000000] On node 0 totalpages: 2094622 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12186 pages used for memmap [ 0.000000] DMA32 zone: 779904 pages, LIFO batch:31 [ 0.000000] Normal zone: 20480 pages used for memmap [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff] [ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf680000-0xbf68ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf690000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023fc00000 s86592 r8192 d24000 u1048576 [ 0.000000] pcpu-alloc: s86592 r8192 d24000 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2061871 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8144716K/8378488K available (7323K kernel code, 1126K rwdata, 3384K rodata, 1324K init, 1416K bss, 233772K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-255. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] HPET config register value = 0xFFFFFFFF. Disabling HPET [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: PIT calibration matches PMTIMER. 1 loops [ 0.000000] tsc: Detected 2493.742 MHz processor [ 0.012004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.48 BogoMIPS (lpj=9974968) [ 0.012008] pid_max: default: 32768 minimum: 301 [ 0.012038] Security Framework initialized [ 0.012067] AppArmor: AppArmor initialized [ 0.012068] Yama: becoming mindful. [ 0.012760] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.020434] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.022992] Mount-cache hash table entries: 256 [ 0.023286] Initializing cgroup subsys memory [ 0.023312] Initializing cgroup subsys devices [ 0.023314] Initializing cgroup subsys freezer [ 0.023317] Initializing cgroup subsys blkio [ 0.023320] Initializing cgroup subsys perf_event [ 0.023322] Initializing cgroup subsys hugetlb [ 0.023351] CPU: Physical Processor ID: 0 [ 0.023352] CPU: Processor Core ID: 0 [ 0.023354] mce: CPU supports 6 MCE banks [ 0.023362] CPU0: Thermal monitoring handled by SMI [ 0.023372] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.023372] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 [ 0.023372] tlb_flushall_shift: -1 [ 0.023485] Freeing SMP alternatives memory: 32K (ffffffff81e66000 - ffffffff81e6e000) [ 0.024922] ACPI: Core revision 20130725 [ 0.025836] ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x678F (20130725/psloop-225) [ 0.027772] ACPI: All ACPI Tables successfully acquired [ 0.028010] ftrace: allocating 28219 entries in 111 pages [ 0.036456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.078078] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz (fam: 06, model: 17, stepping: 06) [ 0.080000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.080000] ... version: 2 [ 0.080000] ... bit width: 40 [ 0.080000] ... generic registers: 2 [ 0.080000] ... value mask: 000000ffffffffff [ 0.080000] ... max period: 000000007fffffff [ 0.080000] ... fixed-purpose events: 3 [ 0.080000] ... event mask: 0000000700000003 [ 0.080145] smpboot: Booting Node 0, Processors # 1 OK [ 0.080044] CPU1: Thermal monitoring handled by SMI [ 0.092047] Brought up 2 CPUs [ 0.092051] smpboot: Total of 2 processors activated (9974.96 BogoMIPS) [ 0.092138] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.096142] devtmpfs: initialized [ 0.099412] EVM: security.selinux [ 0.099414] EVM: security.SMACK64 [ 0.099415] EVM: security.capability [ 0.099433] PM: Registering ACPI NVS region [mem 0xbf680000-0xbf68ffff] (65536 bytes) [ 0.100008] pinctrl core: initialized pinctrl subsystem [ 0.100008] regulator-dummy: no parameters [ 0.100008] RTC time: 19:19:36, date: 01/02/14 [ 0.100008] NET: Registered protocol family 16 [ 0.100130] cpuidle: using governor ladder [ 0.100132] cpuidle: using governor menu [ 0.100172] ACPI: bus type PCI registered [ 0.100174] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.100230] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.100233] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.115901] PCI: Using configuration type 1 for base access [ 0.116874] bio: create slab at 0 [ 0.116874] ACPI: Added _OSI(Module Device) [ 0.116874] ACPI: Added _OSI(Processor Device) [ 0.116874] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.116874] ACPI: Added _OSI(Processor Aggregator Device) [ 0.117191] ACPI: EC: Look up EC in DSDT [ 0.120418] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.120890] ACPI: SSDT 00000000bf687ea1 002BC (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.121160] ACPI: Dynamic OEM Table Load: [ 0.121162] ACPI: SSDT (null) 002BC (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.121257] ACPI: SSDT 00000000bf687832 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.121512] ACPI: Dynamic OEM Table Load: [ 0.121514] ACPI: SSDT (null) 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.121695] ACPI: SSDT 00000000bf68815d 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.121959] ACPI: Dynamic OEM Table Load: [ 0.121961] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.122024] ACPI: SSDT 00000000bf687e1c 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.122280] ACPI: Dynamic OEM Table Load: [ 0.122283] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.124026] ACPI: EC: GPE storm detected(23 GPEs), transactions will use polling mode [ 0.124113] ACPI: Interpreter enabled [ 0.124119] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571) [ 0.124123] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.124156] ACPI: (supports S0 S3 S4 S5) [ 0.124158] ACPI: Using IOAPIC for interrupt routing [ 0.124197] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.624200] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 1.725028] ACPI: Power Resource [FN00] (on) [ 2.256273] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.256279] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 2.256281] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 2.256806] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5) [ 2.256915] PCI host bridge to bus 0000:00 [ 2.256918] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.256921] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 2.256923] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 2.256925] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 2.256927] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 2.256929] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 2.256931] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 2.256933] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff] [ 2.256943] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 [ 2.257042] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000 [ 2.257056] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfc0fffff 64bit] [ 2.257064] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.257070] pci 0000:00:02.0: reg 0x20: [io 0x1c00-0x1c07] [ 2.257160] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000 [ 2.257170] pci 0000:00:02.1: reg 0x10: [mem 0xfc100000-0xfc1fffff 64bit] [ 2.257295] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 [ 2.257347] pci 0000:00:1a.0: reg 0x20: [io 0x1840-0x185f] [ 2.257429] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 2.257463] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 [ 2.257515] pci 0000:00:1a.1: reg 0x20: [io 0x1860-0x187f] [ 2.257595] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 2.257645] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 [ 2.257668] pci 0000:00:1a.7: reg 0x10: [mem 0xfc406000-0xfc4063ff] [ 2.257775] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 2.257825] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 2.257867] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 [ 2.257884] pci 0000:00:1b.0: reg 0x10: [mem 0xfc400000-0xfc403fff 64bit] [ 2.257965] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 2.258018] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 2.258056] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 [ 2.258146] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.258235] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 [ 2.258332] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.258421] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400 [ 2.258508] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 2.258601] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 [ 2.258653] pci 0000:00:1d.0: reg 0x20: [io 0x1880-0x189f] [ 2.258733] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 2.258766] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 [ 2.258818] pci 0000:00:1d.1: reg 0x20: [io 0x18a0-0x18bf] [ 2.258899] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 2.258932] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 [ 2.258984] pci 0000:00:1d.2: reg 0x20: [io 0x18c0-0x18df] [ 2.259068] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 2.259114] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 [ 2.259137] pci 0000:00:1d.7: reg 0x10: [mem 0xfc406400-0xfc4067ff] [ 2.259243] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 2.259292] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 2.259331] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 2.259470] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100 [ 2.259559] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 2.259566] pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000] [ 2.259572] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 2.259575] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 000f) [ 2.259579] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0300 (mask 000f) [ 2.259679] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a [ 2.259695] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 2.259707] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 2.259720] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007] [ 2.259731] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003] [ 2.259743] pci 0000:00:1f.1: reg 0x20: [io 0x1830-0x183f] [ 2.259844] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601 [ 2.259868] pci 0000:00:1f.2: reg 0x10: [io 0x1c18-0x1c1f] [ 2.259878] pci 0000:00:1f.2: reg 0x14: [io 0x1c0c-0x1c0f] [ 2.259888] pci 0000:00:1f.2: reg 0x18: [io 0x1c10-0x1c17] [ 2.259899] pci 0000:00:1f.2: reg 0x1c: [io 0x1c08-0x1c0b] [ 2.259909] pci 0000:00:1f.2: reg 0x20: [io 0x1c20-0x1c3f] [ 2.259920] pci 0000:00:1f.2: reg 0x24: [mem 0xfc405000-0xfc4057ff] [ 2.259977] pci 0000:00:1f.2: PME# supported from D3hot [ 2.260057] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 [ 2.260073] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff] [ 2.260110] pci 0000:00:1f.3: reg 0x20: [io 0x18e0-0x18ff] [ 2.260276] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 2.260281] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 2.260285] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 2.260292] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 2.260408] pci 0000:04:00.0: [11ab:4363] type 00 class 0x020000 [ 2.260436] pci 0000:04:00.0: reg 0x10: [mem 0xf8000000-0xf8003fff 64bit] [ 2.260450] pci 0000:04:00.0: reg 0x18: [io 0x3000-0x30ff] [ 2.260504] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 2.260586] pci 0000:04:00.0: supports D1 D2 [ 2.260588] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.260613] pci 0000:04:00.0: System wakeup disabled by ACPI [ 2.268019] pci 0000:00:1c.1: PCI bridge to [bus 04-05] [ 2.268024] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 2.268028] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff] [ 2.268035] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 2.268151] pci 0000:06:00.0: [8086:4229] type 00 class 0x028000 [ 2.268184] pci 0000:06:00.0: reg 0x10: [mem 0xfa000000-0xfa001fff 64bit] [ 2.268342] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.268384] pci 0000:06:00.0: System wakeup disabled by ACPI [ 2.276021] pci 0000:00:1c.2: PCI bridge to [bus 06-07] [ 2.276025] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 2.276030] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff] [ 2.276037] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 2.276158] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode) [ 2.276171] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 2.276173] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 2.276175] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 2.276177] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 2.276179] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 2.276181] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 2.276184] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) [ 2.276403] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 2.276460] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 2.276516] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 2.276570] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 2.276625] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 2.276681] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 2.276736] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 2.276792] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 2.277212] ACPI: Enabled 2 GPEs in block 00 to 1F [ 2.277222] ACPI: \_SB_.PCI0: notify handler is installed [ 2.277266] Found 1 acpi root devices [ 2.277296] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 2.277365] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 2.277365] vgaarb: loaded [ 2.277365] vgaarb: bridge control possible 0000:00:02.0 [ 2.277365] SCSI subsystem initialized [ 2.277365] libata version 3.00 loaded. [ 2.277365] ACPI: bus type USB registered [ 2.277365] usbcore: registered new interface driver usbfs [ 2.277365] usbcore: registered new interface driver hub [ 2.277365] usbcore: registered new device driver usb [ 2.277365] PCI: Using ACPI for IRQ routing [ 2.287037] PCI: pci_cache_line_size set to 64 bytes [ 2.287102] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 2.287104] e820: reserve RAM buffer [mem 0xbf680000-0xbfffffff] [ 2.287194] NetLabel: Initializing [ 2.287196] NetLabel: domain hash size = 128 [ 2.287197] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.287209] NetLabel: unlabeled traffic allowed by default [ 2.287224] hpet clockevent registered [ 2.287224] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 2.287224] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 2.287224] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 2.289014] Switched to clocksource hpet [ 2.295659] AppArmor: AppArmor Filesystem Enabled [ 2.295688] pnp: PnP ACPI init [ 2.295705] ACPI: bus type PNP registered [ 2.824209] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.824212] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved [ 2.824215] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.824217] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.824220] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 2.824222] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.824224] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 2.824227] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.824231] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.824435] pnp 00:01: [dma 4] [ 2.824465] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 2.824496] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 2.824562] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 2.824618] system 00:04: [io 0x0200-0x020f] has been reserved [ 2.824620] system 00:04: [io 0x0400-0x040f] has been reserved [ 2.824623] system 00:04: [io 0x0680-0x069f] has been reserved [ 2.824625] system 00:04: [io 0x0800-0x080f] has been reserved [ 2.824628] system 00:04: [io 0x1000-0x107f] could not be reserved [ 2.824630] system 00:04: [io 0x1180-0x11bf] has been reserved [ 2.824633] system 00:04: [io 0x1640-0x164f] has been reserved [ 2.824635] system 00:04: [io 0xfe00] has been reserved [ 2.824638] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.824694] system 00:05: [io 0x06a0-0x06af] has been reserved [ 2.824697] system 00:05: [io 0x06b0-0x06ff] has been reserved [ 2.824700] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.824734] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.825007] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.825374] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active) [ 2.825412] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 2.825444] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active) [ 2.825465] pnp: PnP ACPI: found 11 devices [ 2.825466] ACPI: bus type PNP unregistered [ 2.832173] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment [ 2.832181] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff] [ 2.832187] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 2.832190] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 2.832196] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 2.832200] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 2.832208] pci 0000:04:00.0: BAR 6: assigned [mem 0xf2000000-0xf201ffff pref] [ 2.832210] pci 0000:00:1c.1: PCI bridge to [bus 04-05] [ 2.832213] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 2.832219] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff] [ 2.832223] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 2.832230] pci 0000:00:1c.2: PCI bridge to [bus 06-07] [ 2.832233] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 2.832239] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff] [ 2.832243] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 2.832250] pci 0000:00:1e.0: PCI bridge to [bus 08] [ 2.832264] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.832266] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.832268] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.832270] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 2.832272] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 2.832274] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 2.832277] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff] [ 2.832279] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 2.832281] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff] [ 2.832283] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref] [ 2.832286] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 2.832288] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff] [ 2.832290] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref] [ 2.832292] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] [ 2.832294] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff] [ 2.832297] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref] [ 2.832299] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7] [ 2.832301] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff] [ 2.832303] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff] [ 2.832305] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000d3fff] [ 2.832307] pci_bus 0000:08: resource 8 [mem 0x000d4000-0x000d7fff] [ 2.832309] pci_bus 0000:08: resource 9 [mem 0x000d8000-0x000dbfff] [ 2.832311] pci_bus 0000:08: resource 10 [mem 0xc0000000-0xfebfffff] [ 2.832349] NET: Registered protocol family 2 [ 2.832585] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.833215] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.833770] TCP: Hash tables configured (established 65536 bind 65536) [ 2.833836] TCP: reno registered [ 2.833849] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 2.833932] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 2.834061] NET: Registered protocol family 1 [ 2.834077] pci 0000:00:02.0: Boot video device [ 2.835419] PCI: CLS 64 bytes, default 64 [ 2.835479] Trying to unpack rootfs image as initramfs... [ 6.858547] Freeing initrd memory: 19820K (ffff88007eca5000 - ffff880080000000) [ 6.858557] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 6.858561] software IO TLB [mem 0xbb680000-0xbf680000] (64MB) mapped at [ffff8800bb680000-ffff8800bf67ffff] [ 6.858619] Simple Boot Flag at 0x36 set to 0x1 [ 6.858771] Scanning for low memory corruption every 60 seconds [ 6.859098] Initialise module verification [ 6.859153] audit: initializing netlink socket (disabled) [ 6.859173] type=2000 audit(1388690382.852:1): initialized [ 6.888846] bounce pool size: 64 pages [ 6.888866] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 6.890618] zbud: loaded [ 6.890755] VFS: Disk quotas dquot_6.5.2 [ 6.890798] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 6.891336] fuse init (API version 7.22) [ 6.891419] msgmni has been set to 15946 [ 6.891903] Key type asymmetric registered [ 6.891906] Asymmetric key parser 'x509' registered [ 6.891943] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 6.891977] io scheduler noop registered [ 6.891979] io scheduler deadline registered (default) [ 6.892018] io scheduler cfq registered [ 6.892113] pcieport 0000:00:1c.0: enabling device (0000 -> 0003) [ 6.892281] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 6.892456] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 6.892522] pcieport 0000:00:1c.2: enabling device (0000 -> 0003) [ 6.892629] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 6.892714] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 6.892732] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 6.892803] intel_idle: does not run on family 6 model 23 [ 6.924038] ACPI: AC Adapter [ADP1] (on-line) [ 6.924150] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 6.956054] ACPI: Lid Switch [LID0] [ 6.956098] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 6.956103] ACPI: Sleep Button [SLPB] [ 6.956140] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 6.956143] ACPI: Power Button [PWRB] [ 6.956187] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 6.956190] ACPI: Power Button [PWRF] [ 6.956254] ACPI: Fan [FAN0] (on) [ 6.956296] ACPI: Requesting acpi_cpufreq [ 6.972086] Monitor-Mwait will be used to enter C-1 state [ 6.972092] Monitor-Mwait will be used to enter C-2 state [ 6.972095] tsc: Marking TSC unstable due to TSC halts in idle [ 6.972100] ACPI: acpi_idle registered with cpuidle [ 6.972642] thermal LNXTHERM:00: registered as thermal_zone0 [ 6.972644] ACPI: Thermal Zone [TZ00] (27 C) [ 6.972795] ACPI: Invalid active1 threshold [ 6.972892] thermal LNXTHERM:01: registered as thermal_zone1 [ 6.972894] ACPI: Thermal Zone [TZ01] (43 C) [ 6.972920] GHES: HEST is not enabled! [ 6.973010] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 6.993414] 00:07: ttyS0 at I/O 0x3f8 (irq = 3, base_baud = 115200) is a 16550A [ 6.995431] Linux agpgart interface v0.103 [ 6.995501] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 6.995558] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 6.997157] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 6.997341] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 6.999030] brd: module loaded [ 6.999932] loop: module loaded [ 7.000089] ata_piix 0000:00:1f.1: version 2.13 [ 7.000246] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 7.000779] scsi0 : ata_piix [ 7.000873] scsi1 : ata_piix [ 7.000907] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14 [ 7.000909] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15 [ 7.001326] libphy: Fixed MDIO Bus: probed [ 7.001412] tun: Universal TUN/TAP device driver, 1.6 [ 7.001413] tun: (C) 1999-2004 Max Krasnyansky [ 7.001460] PPP generic driver version 2.4.2 [ 7.001506] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.001511] ehci-pci: EHCI PCI platform driver [ 7.001629] ehci-pci 0000:00:1a.7: setting latency timer to 64 [ 7.001642] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 7.001648] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 7.001664] ehci-pci 0000:00:1a.7: debug port 1 [ 7.005571] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 7.005594] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfc406000 [ 7.016018] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 7.016074] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.016077] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.016079] usb usb1: Product: EHCI Host Controller [ 7.016081] usb usb1: Manufacturer: Linux 3.12.0-7-generic ehci_hcd [ 7.016082] usb usb1: SerialNumber: 0000:00:1a.7 [ 7.016212] hub 1-0:1.0: USB hub found [ 7.016222] hub 1-0:1.0: 4 ports detected [ 7.016465] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 7.016473] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 7.016478] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 7.016491] ehci-pci 0000:00:1d.7: debug port 1 [ 7.020402] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 7.020428] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfc406400 [ 7.032018] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 7.032071] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.032073] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.032075] usb usb2: Product: EHCI Host Controller [ 7.032077] usb usb2: Manufacturer: Linux 3.12.0-7-generic ehci_hcd [ 7.032079] usb usb2: SerialNumber: 0000:00:1d.7 [ 7.032194] hub 2-0:1.0: USB hub found [ 7.032203] hub 2-0:1.0: 6 ports detected [ 7.032406] ehci-platform: EHCI generic platform driver [ 7.032413] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.032415] ohci-pci: OHCI PCI platform driver [ 7.032424] ohci-platform: OHCI generic platform driver [ 7.032430] uhci_hcd: USB Universal Host Controller Interface driver [ 7.032533] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 7.032537] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 7.032542] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 7.032577] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840 [ 7.032624] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.032626] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.032628] usb usb3: Product: UHCI Host Controller [ 7.032630] usb usb3: Manufacturer: Linux 3.12.0-7-generic uhci_hcd [ 7.032632] usb usb3: SerialNumber: 0000:00:1a.0 [ 7.032736] hub 3-0:1.0: USB hub found [ 7.032744] hub 3-0:1.0: 2 ports detected [ 7.032930] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 7.032933] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 7.032938] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 7.032970] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860 [ 7.033018] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.033020] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.033022] usb usb4: Product: UHCI Host Controller [ 7.033024] usb usb4: Manufacturer: Linux 3.12.0-7-generic uhci_hcd [ 7.033026] usb usb4: SerialNumber: 0000:00:1a.1 [ 7.033128] hub 4-0:1.0: USB hub found [ 7.033136] hub 4-0:1.0: 2 ports detected [ 7.033313] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 7.033316] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 7.033321] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 7.033344] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 7.033390] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.033392] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.033394] usb usb5: Product: UHCI Host Controller [ 7.033396] usb usb5: Manufacturer: Linux 3.12.0-7-generic uhci_hcd [ 7.033398] usb usb5: SerialNumber: 0000:00:1d.0 [ 7.033498] hub 5-0:1.0: USB hub found [ 7.033509] hub 5-0:1.0: 2 ports detected [ 7.033686] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 7.033690] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 7.033694] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 7.033727] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0 [ 7.033773] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.033775] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.033777] usb usb6: Product: UHCI Host Controller [ 7.033779] usb usb6: Manufacturer: Linux 3.12.0-7-generic uhci_hcd [ 7.033781] usb usb6: SerialNumber: 0000:00:1d.1 [ 7.033887] hub 6-0:1.0: USB hub found [ 7.033896] hub 6-0:1.0: 2 ports detected [ 7.034071] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 7.034074] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 7.034081] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 7.034104] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 7.034150] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.034152] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.034154] usb usb7: Product: UHCI Host Controller [ 7.034156] usb usb7: Manufacturer: Linux 3.12.0-7-generic uhci_hcd [ 7.034158] usb usb7: SerialNumber: 0000:00:1d.2 [ 7.034259] hub 7-0:1.0: USB hub found [ 7.034267] hub 7-0:1.0: 2 ports detected [ 7.034403] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 7.040612] i8042: Detected active multiplexing controller, rev 1.1 [ 7.043284] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.043289] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 7.043314] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 7.043336] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 7.043355] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 7.043499] mousedev: PS/2 mouse device common for all mice [ 7.043788] rtc_cmos 00:06: RTC can wake from S4 [ 7.043926] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 7.043952] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 7.044023] device-mapper: uevent: version 1.0.3 [ 7.044107] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com [ 7.044112] ledtrig-cpu: registered to indicate activity on CPUs [ 7.044188] TCP: cubic registered [ 7.044283] NET: Registered protocol family 10 [ 7.044468] NET: Registered protocol family 17 [ 7.044478] Key type dns_resolver registered [ 7.044754] Loading module verification certificates [ 7.045737] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: feb0f81c1a7fb4fe80259a379b62c17b06cf1ec6' [ 7.045750] registered taskstats version 1 [ 7.048717] Key type trusted registered [ 7.050802] Key type encrypted registered [ 7.052951] AppArmor: AppArmor sha1 policy hashing enabled [ 7.053278] Magic number: 14:404:343 [ 7.053311] tty tty60: hash matches [ 7.053394] rtc_cmos 00:06: setting system clock to 2014-01-02 19:19:43 UTC (1388690383) [ 7.053805] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 7.053807] EDD information not available. [ 7.053844] PM: Hibernation image not present or could not be loaded. [ 7.170022] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 7.215789] ata1.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HQ04, max MWDMA2 [ 7.228222] ata1.00: configured for MWDMA2 [ 7.355163] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 7.505635] usb 1-2: New USB device found, idVendor=05e3, idProduct=0715 [ 7.505638] usb 1-2: New USB device strings: Mfr=3, Product=4, SerialNumber=2 [ 7.505640] usb 1-2: Product: USB Storage [ 7.505642] usb 1-2: Manufacturer: Generic [ 7.505644] usb 1-2: SerialNumber: 000000009412 [ 7.524070] ACPI: Battery Slot [BAT0] (battery present) [ 7.540034] ACPI: Battery Slot [BAT1] (battery absent) [ 7.544284] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HQ04 PQ: 0 ANSI: 5 [ 7.549397] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.549400] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 7.549530] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 7.549668] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 7.551252] Freeing unused kernel memory: 1324K (ffffffff81d1b000 - ffffffff81e66000) [ 7.551254] Write protecting the kernel read-only data: 12288k [ 7.553767] Freeing unused kernel memory: 860K (ffff880001729000 - ffff880001800000) [ 7.555687] Freeing unused kernel memory: 712K (ffff880001b4e000 - ffff880001c00000) [ 7.571291] systemd-udevd[106]: starting version 204 [ 7.614557] acpi device:06: registered as cooling_device3 [ 7.614582] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 7.614622] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input9 [ 7.616040] usb 1-3: new high-speed USB device number 3 using ehci-pci [ 7.627848] sky2: driver version 1.30 [ 7.627983] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3 [ 7.632838] ahci 0000:00:1f.2: version 3.0 [ 7.632986] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 7.633050] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 7.633053] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part [ 7.633058] ahci 0000:00:1f.2: setting latency timer to 64 [ 7.635494] sky2 0000:04:00.0: irq 44 for MSI/MSI-X [ 7.635722] sky2 0000:04:00.0 eth0: addr 00:a0:d1:cd:97:e5 [ 7.635868] scsi2 : ahci [ 7.637134] scsi3 : ahci [ 7.638374] scsi4 : ahci [ 7.638423] ata3: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405100 irq 43 [ 7.638426] ata4: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405180 irq 43 [ 7.638429] ata5: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405200 irq 43 [ 7.652969] [drm] Initialized drm 1.1.0 20060810 [ 7.691245] [drm] Memory usable by graphics device = 512M [ 7.691254] i915 0000:00:02.0: setting latency timer to 64 [ 7.710724] i915 0000:00:02.0: irq 45 for MSI/MSI-X [ 7.710733] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 7.710735] [drm] Driver supports precise vblank timestamp query. [ 7.710943] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 7.853655] usb 1-3: New USB device found, idVendor=05c8, idProduct=0103 [ 7.853659] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 7.853661] usb 1-3: Product: FO13FF-65-1 PC-CAM [ 7.853663] usb 1-3: Manufacturer: Foxlink [ 7.853665] usb 1-3: SerialNumber: 1.09 [ 7.859584] usb-storage 1-2:1.0: USB Mass Storage device detected [ 7.859918] scsi5 : usb-storage 1-2:1.0 [ 7.859982] usbcore: registered new interface driver usb-storage [ 7.883622] [drm] initialized overlay support [ 7.960037] ata4: SATA link down (SStatus 0 SControl 300) [ 7.960060] ata5: SATA link down (SStatus 0 SControl 300) [ 7.960081] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.960758] ata3.00: unexpected _GTF length (8) [ 7.960894] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 7.960897] ata3.00: ATA-9: Samsung SSD 840 Series, DXT08B0Q, max UDMA/133 [ 7.960899] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 7.961178] ata3.00: unexpected _GTF length (8) [ 7.961267] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 7.961352] ata3.00: configured for UDMA/133 [ 7.961487] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 840 DXT0 PQ: 0 ANSI: 5 [ 7.961647] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 7.961700] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 7.961764] sd 2:0:0:0: [sda] Write Protect is off [ 7.961772] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.961799] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.968068] sda: sda1 < sda5 sda6 sda7 sda8 sda9 > sda2 [ 7.968563] sd 2:0:0:0: [sda] Attached SCSI disk [ 7.972084] usb 2-2: new high-speed USB device number 2 using ehci-pci [ 8.104740] usb 2-2: New USB device found, idVendor=3538, idProduct=0042 [ 8.104744] usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=3 [ 8.104747] usb 2-2: Product: USB Mass Storage Device [ 8.104749] usb 2-2: SerialNumber: 00000000000379 [ 8.105033] usb-storage 2-2:1.0: USB Mass Storage device detected [ 8.105114] scsi6 : usb-storage 2-2:1.0 [ 8.123072] fbcon: inteldrmfb (fb0) is primary device [ 8.152501] [drm:intel_pipe_config_compare] *ERROR* mismatch in gmch_pfit.lvds_border_bits (expected 32768, found 0) [ 8.152502] ------------[ cut here ]------------ [ 8.152534] WARNING: CPU: 1 PID: 122 at /build/buildd/linux-3.12.0/drivers/gpu/drm/i915/intel_display.c:8810 check_crtc_state+0x61f/0xb10 [i915]() [ 8.152534] pipe state doesn't match! [ 8.152540] Modules linked in: usb_storage i915(+) i2c_algo_bit drm_kms_helper drm ahci libahci sky2 video [ 8.152542] CPU: 1 PID: 122 Comm: systemd-udevd Not tainted 3.12.0-7-generic #15-Ubuntu [ 8.152543] Hardware name: FUJITSU SIEMENS ESPRIMO Mobile U9200/S11D, BIOS 1.11 - 067 - 1566 04/22/2008 [ 8.152546] 0000000000000009 ffff8802331d9160 ffffffff81711aee ffff8802331d91a8 [ 8.152548] ffff8802331d9198 ffffffff8106432d ffff88007fafe000 ffff88007fafe6d0 [ 8.152549] ffff880233440418 ffff880233440000 ffff880233440420 ffff8802331d91f8 [ 8.152550] Call Trace: [ 8.152556] [] dump_stack+0x45/0x56 [ 8.152560] [] warn_slowpath_common+0x7d/0xa0 [ 8.152562] [] warn_slowpath_fmt+0x4c/0x50 [ 8.152576] [] check_crtc_state+0x61f/0xb10 [i915] [ 8.152593] [] intel_modeset_check_state+0x2c3/0x780 [i915] [ 8.152608] [] intel_set_mode+0x25/0x30 [i915] [ 8.152623] [] intel_crtc_set_config+0x7e3/0x9d0 [i915] [ 8.152640] [] drm_mode_set_config_internal+0x5d/0xe0 [drm] [ 8.152644] [] drm_fb_helper_set_par+0x71/0xf0 [drm_kms_helper] [ 8.152648] [] fbcon_init+0x4f4/0x570 [ 8.152651] [] visual_init+0xb8/0x120 [ 8.152653] [] do_bind_con_driver+0x163/0x330 [ 8.152655] [] do_take_over_console+0x114/0x1c0 [ 8.152656] [] do_fbcon_takeover+0x63/0xd0 [ 8.152658] [] fbcon_event_notify+0x6dd/0x830 [ 8.152660] [] notifier_call_chain+0x4c/0x70 [ 8.152663] [] __blocking_notifier_call_chain+0x4d/0x70 [ 8.152665] [] blocking_notifier_call_chain+0x16/0x20 [ 8.152667] [] fb_notifier_call_chain+0x1b/0x20 [ 8.152668] [] register_framebuffer+0x1db/0x310 [ 8.152671] [] drm_fb_helper_initial_config+0x32f/0x510 [drm_kms_helper] [ 8.152674] [] ? __kmalloc+0x15f/0x190 [ 8.152692] [] intel_fbdev_initial_config+0x21/0x30 [i915] [ 8.152704] [] i915_driver_load+0xf27/0xf50 [i915] [ 8.152713] [] drm_get_pci_dev+0x129/0x320 [drm] [ 8.152724] [] i915_pci_probe+0x2c/0x70 [i915] [ 8.152727] [] local_pci_probe+0x3e/0x70 [ 8.152728] [] pci_device_probe+0x121/0x130 [ 8.152731] [] driver_probe_device+0x125/0x3b0 [ 8.152733] [] __driver_attach+0x93/0xa0 [ 8.152734] [] ? __device_attach+0x40/0x40 [ 8.152736] [] bus_for_each_dev+0x63/0xa0 [ 8.152738] [] driver_attach+0x1e/0x20 [ 8.152739] [] bus_add_driver+0x200/0x2d0 [ 8.152741] [] ? 0xffffffffa015afff [ 8.152743] [] driver_register+0x64/0xf0 [ 8.152744] [] ? 0xffffffffa015afff [ 8.152745] [] __pci_register_driver+0x4c/0x50 [ 8.152752] [] drm_pci_init+0x11a/0x130 [drm] [ 8.152754] [] ? 0xffffffffa015afff [ 8.152764] [] i915_init+0x66/0x68 [i915] [ 8.152767] [] do_one_initcall+0xf2/0x1a0 [ 8.152769] [] ? set_memory_nx+0x43/0x50 [ 8.152772] [] load_module+0x12b2/0x1b80 [ 8.152773] [] ? store_uevent+0x40/0x40 [ 8.152776] [] SyS_finit_module+0x86/0xb0 [ 8.152778] [] tracesys+0xe1/0xe6 [ 8.152779] ---[ end trace ef388cfd645d22d4 ]--- [ 8.211216] Console: switching to colour frame buffer device 160x50 [ 8.213898] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 8.213900] i915 0000:00:02.0: registered panic notifier [ 8.213909] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 8.272056] usb 2-5: new high-speed USB device number 4 using ehci-pci [ 8.415496] usb 2-5: New USB device found, idVendor=0af0, idProduct=7601 [ 8.415502] usb 2-5: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 8.415504] usb 2-5: Product: Globetrotter HSUPA Modem [ 8.415506] usb 2-5: Manufacturer: Option N.V. [ 8.660055] usb 6-1: new low-speed USB device number 2 using uhci_hcd [ 8.837763] usb 6-1: New USB device found, idVendor=0a81, idProduct=0205 [ 8.837765] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.837768] usb 6-1: Product: PS2 to USB Converter [ 8.837770] usb 6-1: Manufacturer: CHESEN [ 8.854184] hidraw: raw HID events driver (C) Jiri Kosina [ 8.858670] scsi 5:0:0:0: Direct-Access Generic STORAGE DEVICE 9412 PQ: 0 ANSI: 0 [ 8.858899] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 8.860291] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 8.895039] usbcore: registered new interface driver usbhid [ 8.895041] usbhid: USB HID core driver [ 8.896699] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input10 [ 8.897008] hid-generic 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.1-1/input0 [ 8.897332] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.1/input/input11 [ 8.897983] hid-generic 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.1-1/input1 [ 9.105251] scsi 6:0:0:0: Direct-Access Generic USB Flash Disk 0.00 PQ: 0 ANSI: 2 [ 9.105453] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 9.106105] sd 6:0:0:0: [sdc] 2048000 512-byte logical blocks: (1.04 GB/1000 MiB) [ 9.106732] sd 6:0:0:0: [sdc] Write Protect is off [ 9.106735] sd 6:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 9.107373] sd 6:0:0:0: [sdc] Asking for cache data failed [ 9.107376] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 9.110498] sd 6:0:0:0: [sdc] Asking for cache data failed [ 9.110501] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 9.180643] sdc: sdc1 sdc2 [ 9.183499] sd 6:0:0:0: [sdc] Asking for cache data failed [ 9.183502] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 9.183504] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 9.806003] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 9.809490] ISO 9660 Extensions: RRIP_1991A [ 9.898435] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 25.217247] Adding 10485756k swap on /dev/sda8. Priority:-1 extents:1 across:10485756k SSFS [ 25.310740] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.404820] systemd-udevd[1097]: starting version 204 [ 27.123903] init: avahi-cups-reload main process (1173) terminated with status 1 [ 27.137753] Bluetooth: Core ver 2.16 [ 27.137792] NET: Registered protocol family 31 [ 27.137794] Bluetooth: HCI device and connection manager initialized [ 27.137805] Bluetooth: HCI socket layer initialized [ 27.137807] Bluetooth: L2CAP socket layer initialized [ 27.137814] Bluetooth: SCO socket layer initialized [ 27.550694] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 27.550698] Bluetooth: BNEP filters: protocol multicast [ 27.550709] Bluetooth: BNEP socket layer initialized [ 27.554014] Bluetooth: RFCOMM TTY layer initialized [ 27.554024] Bluetooth: RFCOMM socket layer initialized [ 27.554025] Bluetooth: RFCOMM ver 1.11 [ 27.608558] lp: driver loaded but no devices found [ 27.635484] ppdev: user-space parallel port driver [ 27.659283] parport_pc 00:08: reported by Plug and Play ACPI [ 27.659335] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE] [ 27.756170] lp0: using parport0 (interrupt-driven). [ 27.777213] snd_hda_intel 0000:00:1b.0: enabling device (0104 -> 0106) [ 27.777380] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 27.954658] hda_codec: ALC262: SKU not ready 0x598301f0 [ 27.954942] autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line [ 27.954944] speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 27.954946] hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 27.954947] mono: mono_out=0x0 [ 27.954948] inputs: [ 27.954950] Internal Mic=0x19 [ 27.954952] Rear Mic=0x1a [ 27.954954] Mic=0x18 [ 27.954955] realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1d [ 27.954957] realtek: Enable default setup for auto mode as fallback [ 27.962154] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 27.962263] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 27.962355] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 27.962443] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 28.040444] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251) [ 28.040452] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 28.040456] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 28.040459] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 28.040461] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 28.040465] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 28.040466] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 28.130488] atkbd serio0: Unknown key pressed (translated set 2, code 0x83 on isa0060/serio0). [ 28.130491] atkbd serio0: Use 'setkeycodes e003 ' to make it known. [ 28.555289] device-mapper: multipath: version 1.6.0 loaded [ 28.826383] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x607 [ 28.890542] cfg80211: Calling CRDA to update world regulatory domain [ 29.455023] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04753/0x200000/0x0, board id: 3655, fw id: 189075 [ 29.496377] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input19 [ 30.530880] hso: /build/buildd/linux-3.12.0/drivers/net/usb/hso.c: Option Wireless [ 30.563312] usbcore: registered new interface driver hso [ 30.927115] Linux video capture interface: v2.00 [ 31.242322] uvcvideo: Found UVC 1.00 device FO13FF-65-1 PC-CAM (05c8:0103) [ 31.254459] input: FO13FF-65-1 PC-CAM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input20 [ 31.254781] usbcore: registered new interface driver uvcvideo [ 31.254783] USB Video Class driver (1.1.1) [ 31.435251] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: [ 31.435255] iwl4965: Copyright(c) 2003-2011 Intel Corporation [ 31.435377] iwl4965 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control [ 31.435390] iwl4965 0000:06:00.0: enabling device (0104 -> 0106) [ 31.435718] iwl4965 0000:06:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 [ 31.451075] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x607 [ 31.473646] iwl4965 0000:06:00.0: device EEPROM VER=0x36, CALIB=0x5 [ 31.480307] iwl4965 0000:06:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 31.480348] iwl4965 0000:06:00.0: irq 47 for MSI/MSI-X [ 31.485195] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 31.744085] iwl4965 0000:06:00.0: loaded firmware version 228.61.2.24 [ 31.848912] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs' [ 31.962417] cfg80211: World regulatory domain updated: [ 31.962422] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 31.962424] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.962426] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.962428] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 31.962430] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.962431] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 32.128292] init: failsafe main process (1341) killed by TERM signal [ 35.355483] usb 2-5: hso received invalid serial state notification [ 36.443828] init: alsa-restore main process (1719) terminated with status 99 [ 37.401771] sky2 0000:04:00.0 eth0: enabling interface [ 37.401883] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 37.402394] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 37.404413] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 39.875119] sky2 0000:04:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 39.875139] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 333.220932] perf samples too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 348.078756] atkbd serio0: Unknown key pressed (translated set 2, code 0x83 on isa0060/serio0). [ 348.078768] atkbd serio0: Use 'setkeycodes e003 ' to make it known. [ 348.217168] atkbd serio0: Unknown key released (translated set 2, code 0x83 on isa0060/serio0). [ 348.217178] atkbd serio0: Use 'setkeycodes e003 ' to make it known. [ 348.226025] usb 1-3: USB disconnect, device number 3 [ 387.560455] pci 0000:02:00.0: [1095:3132] type 00 class 0x018000 [ 387.560508] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x0000007f 64bit] [ 387.560542] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit] [ 387.560563] pci 0000:02:00.0: reg 0x20: [io 0x0000-0x007f] [ 387.560600] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 387.560717] pci 0000:02:00.0: supports D1 D2 [ 387.560791] pci 0000:02:00.0: System wakeup disabled by ACPI [ 387.568100] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0000000-0xf007ffff pref] [ 387.568112] pci 0000:02:00.0: BAR 2: assigned [mem 0xf6000000-0xf6003fff 64bit] [ 387.568141] pci 0000:02:00.0: BAR 0: assigned [mem 0xf6004000-0xf600407f 64bit] [ 387.568168] pci 0000:02:00.0: BAR 4: assigned [io 0x2000-0x207f] [ 387.568200] pci 0000:02:00.0: no hotplug settings from platform [ 387.579839] sata_sil24 0000:02:00.0: version 1.1 [ 387.579850] sata_sil24 0000:02:00.0: enabling device (0000 -> 0003) [ 387.580535] scsi7 : sata_sil24 [ 387.580661] scsi8 : sata_sil24 [ 387.580758] ata6: SATA max UDMA/100 host m128@0xf6004000 port 0xf6000000 irq 16 [ 387.580763] ata7: SATA max UDMA/100 host m128@0xf6004000 port 0xf6002000 irq 16 [ 389.660100] ata6: SATA link down (SStatus 0 SControl 0) [ 391.740109] ata7: SATA link down (SStatus 0 SControl 0) [ 417.856548] pci 0000:02:00.0: [1095:3132] type 00 class 0x018000 [ 417.856603] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x0000007f 64bit] [ 417.856637] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit] [ 417.856660] pci 0000:02:00.0: reg 0x20: [io 0x0000-0x007f] [ 417.856698] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 417.856824] pci 0000:02:00.0: supports D1 D2 [ 417.856890] pci 0000:02:00.0: System wakeup disabled by ACPI [ 417.864062] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0000000-0xf007ffff pref] [ 417.864067] pci 0000:02:00.0: BAR 2: assigned [mem 0xf6000000-0xf6003fff 64bit] [ 417.864084] pci 0000:02:00.0: BAR 0: assigned [mem 0xf6004000-0xf600407f 64bit] [ 417.864101] pci 0000:02:00.0: BAR 4: assigned [io 0x2000-0x207f] [ 417.864120] pci 0000:02:00.0: no hotplug settings from platform [ 417.864195] sata_sil24 0000:02:00.0: enabling device (0000 -> 0003) [ 417.864938] scsi9 : sata_sil24 [ 417.865012] scsi10 : sata_sil24 [ 417.865060] ata8: SATA max UDMA/100 host m128@0xf6004000 port 0xf6000000 irq 16 [ 417.865064] ata9: SATA max UDMA/100 host m128@0xf6004000 port 0xf6002000 irq 16 [ 419.944097] ata8: SATA link down (SStatus 0 SControl 0) [ 422.024080] ata9: SATA link down (SStatus 0 SControl 0) [ 436.820538] pci 0000:02:00.0: [1095:3132] type 00 class 0x018000 [ 436.820594] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x0000007f 64bit] [ 436.820627] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit] [ 436.820650] pci 0000:02:00.0: reg 0x20: [io 0x0000-0x007f] [ 436.820689] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 436.820814] pci 0000:02:00.0: supports D1 D2 [ 436.820882] pci 0000:02:00.0: System wakeup disabled by ACPI [ 436.828467] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0000000-0xf007ffff pref] [ 436.828479] pci 0000:02:00.0: BAR 2: assigned [mem 0xf6000000-0xf6003fff 64bit] [ 436.828508] pci 0000:02:00.0: BAR 0: assigned [mem 0xf6004000-0xf600407f 64bit] [ 436.828537] pci 0000:02:00.0: BAR 4: assigned [io 0x2000-0x207f] [ 436.828575] pci 0000:02:00.0: no hotplug settings from platform [ 436.828717] sata_sil24 0000:02:00.0: enabling device (0000 -> 0003) [ 436.829961] scsi11 : sata_sil24 [ 436.830155] scsi12 : sata_sil24 [ 436.830269] ata10: SATA max UDMA/100 host m128@0xf6004000 port 0xf6000000 irq 16 [ 436.830278] ata11: SATA max UDMA/100 host m128@0xf6004000 port 0xf6002000 irq 16 [ 438.908098] ata10: SATA link down (SStatus 0 SControl 0) [ 440.988094] ata11: SATA link down (SStatus 0 SControl 0) [ 475.636562] pci 0000:02:00.0: [1095:3132] type 00 class 0x018000 [ 475.636617] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x0000007f 64bit] [ 475.636651] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit] [ 475.636674] pci 0000:02:00.0: reg 0x20: [io 0x0000-0x007f] [ 475.636712] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 475.636838] pci 0000:02:00.0: supports D1 D2 [ 475.636905] pci 0000:02:00.0: System wakeup disabled by ACPI [ 475.644053] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0000000-0xf007ffff pref] [ 475.644057] pci 0000:02:00.0: BAR 2: assigned [mem 0xf6000000-0xf6003fff 64bit] [ 475.644074] pci 0000:02:00.0: BAR 0: assigned [mem 0xf6004000-0xf600407f 64bit] [ 475.644091] pci 0000:02:00.0: BAR 4: assigned [io 0x2000-0x207f] [ 475.644108] pci 0000:02:00.0: no hotplug settings from platform [ 475.644186] sata_sil24 0000:02:00.0: enabling device (0000 -> 0003) [ 475.645436] scsi13 : sata_sil24 [ 475.645517] scsi14 : sata_sil24 [ 475.645559] ata12: SATA max UDMA/100 host m128@0xf6004000 port 0xf6000000 irq 16 [ 475.645563] ata13: SATA max UDMA/100 host m128@0xf6004000 port 0xf6002000 irq 16 [ 477.724123] ata12: SATA link down (SStatus 0 SControl 0) [ 479.804091] ata13: SATA link down (SStatus 0 SControl 0) [ 525.248550] pci 0000:02:00.0: [1095:3132] type 00 class 0x018000 [ 525.248605] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x0000007f 64bit] [ 525.248640] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit] [ 525.248662] pci 0000:02:00.0: reg 0x20: [io 0x0000-0x007f] [ 525.248698] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 525.248820] pci 0000:02:00.0: supports D1 D2 [ 525.248886] pci 0000:02:00.0: System wakeup disabled by ACPI [ 525.256081] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0000000-0xf007ffff pref] [ 525.256093] pci 0000:02:00.0: BAR 2: assigned [mem 0xf6000000-0xf6003fff 64bit] [ 525.256121] pci 0000:02:00.0: BAR 0: assigned [mem 0xf6004000-0xf600407f 64bit] [ 525.256148] pci 0000:02:00.0: BAR 4: assigned [io 0x2000-0x207f] [ 525.256183] pci 0000:02:00.0: no hotplug settings from platform [ 525.256324] sata_sil24 0000:02:00.0: enabling device (0000 -> 0003) [ 525.258455] scsi15 : sata_sil24 [ 525.258658] scsi16 : sata_sil24 [ 525.258770] ata14: SATA max UDMA/100 host m128@0xf6004000 port 0xf6000000 irq 16 [ 525.258779] ata15: SATA max UDMA/100 host m128@0xf6004000 port 0xf6002000 irq 16 [ 527.336101] ata14: SATA link down (SStatus 0 SControl 0) [ 529.416098] ata15: SATA link down (SStatus 0 SControl 0) [ 609.488272] usb 6-1: USB disconnect, device number 2 [ 720.684586] pci 0000:02:00.0: [1095:3132] type 00 class 0x018000 [ 720.684640] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x0000007f 64bit] [ 720.684675] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit] [ 720.684697] pci 0000:02:00.0: reg 0x20: [io 0x0000-0x007f] [ 720.684734] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 720.684860] pci 0000:02:00.0: supports D1 D2 [ 720.684927] pci 0000:02:00.0: System wakeup disabled by ACPI [ 720.692156] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0000000-0xf007ffff pref] [ 720.692169] pci 0000:02:00.0: BAR 2: assigned [mem 0xf6000000-0xf6003fff 64bit] [ 720.692199] pci 0000:02:00.0: BAR 0: assigned [mem 0xf6004000-0xf600407f 64bit] [ 720.692226] pci 0000:02:00.0: BAR 4: assigned [io 0x2000-0x207f] [ 720.692262] pci 0000:02:00.0: no hotplug settings from platform [ 720.692378] sata_sil24 0000:02:00.0: enabling device (0000 -> 0003) [ 720.694421] scsi17 : sata_sil24 [ 720.697070] scsi18 : sata_sil24 [ 720.697121] ata16: SATA max UDMA/100 host m128@0xf6004000 port 0xf6000000 irq 16 [ 720.697126] ata17: SATA max UDMA/100 host m128@0xf6004000 port 0xf6002000 irq 16 [ 722.776072] ata16: SATA link down (SStatus 0 SControl 0) [ 724.860099] ata17: SATA link down (SStatus 0 SControl 0) [ 1613.471276] ata16: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen [ 1613.471288] ata16: irq_stat 0x00a00080, device exchanged [ 1613.471302] ata16: hard resetting link [ 1615.668118] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 0) [ 1615.668519] ata16.00: ATA-7: FUJITSU MHV2060BH PL, 892C, max UDMA/100 [ 1615.668527] ata16.00: 117231408 sectors, multi 16: LBA48 [ 1615.670896] ata16.00: configured for UDMA/100 [ 1615.670908] ata16: EH complete [ 1615.671112] scsi 17:0:0:0: Direct-Access ATA FUJITSU MHV2060B 892C PQ: 0 ANSI: 5 [ 1615.671602] sd 17:0:0:0: Attached scsi generic sg4 type 0 [ 1615.672691] sd 17:0:0:0: [sdd] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 1615.672865] sd 17:0:0:0: [sdd] Write Protect is off [ 1615.672874] sd 17:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1615.672949] sd 17:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1615.698439] sdd: sdd1 sdd2 [ 1615.698748] sd 17:0:0:0: [sdd] Attached SCSI disk [ 1623.667462] systemd-hostnamed[5965]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!