[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-24-generic (buildd@komainu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #38-Ubuntu SMP Tue May 1 16:18:50 UTC 2012 (Ubuntu 3.2.0-24.38-generic 3.2.16) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=/dev/sda1 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfdf0000 (usable) [ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfdf1000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfdf1000 - 00000000cfe00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-880GM-USB3/GA-880GM-USB3, BIOS FE 10/25/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC [ 0.000000] total RAM covered: 3326M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC [ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f5d30] f5d30 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfdf0000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfc00000 page 2M [ 0.000000] 00cfc00000 - 00cfdf0000 page 4k [ 0.000000] kernel direct mapping tables up to cfdf0000 @ 1fffd000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ cfdee000-cfdf0000 [ 0.000000] ACPI: RSDP 00000000000f7760 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfdf1000 00044 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfdf1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfdf1100 0677B (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000cfdf0000 00040 [ 0.000000] ACPI: MSDM 00000000cfdf7940 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: HPET 00000000cfdf79c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfdf7a00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: MATS 00000000cfdf7a40 00034 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 00000000cfdf7ab0 00202 (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000cfdf7880 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000cfdf7d30 01158 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff] [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009b [ 0.000000] 0: 0x00000100 -> 0x000cfdf0 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1047931 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3910 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 831024 pages, LIFO batch:31 [ 0.000000] Normal zone: 3072 pages used for memmap [ 0.000000] Normal zone: 193536 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfdf1000 [ 0.000000] PM: Registered nosave memory: 00000000cfdf1000 - 00000000cfe00000 [ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83072 r8192 d23424 u262144 [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028470 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=/dev/sda1 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000 [ 0.000000] Memory: 3977876k/4980736k available (6567k kernel code, 789012k absent, 213848k reserved, 6636k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3314.900 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6629.80 BogoMIPS (lpj=13259600) [ 0.004007] pid_max: default: 32768 minimum: 301 [ 0.004029] Security Framework initialized [ 0.004040] AppArmor: AppArmor initialized [ 0.004041] Yama: becoming mindful. [ 0.004465] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.005586] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.006057] Mount-cache hash table entries: 256 [ 0.006170] Initializing cgroup subsys cpuacct [ 0.006174] Initializing cgroup subsys memory [ 0.006183] Initializing cgroup subsys devices [ 0.006184] Initializing cgroup subsys freezer [ 0.006186] Initializing cgroup subsys blkio [ 0.006191] Initializing cgroup subsys perf_event [ 0.006213] tseg: 00cff00000 [ 0.006215] CPU: Physical Processor ID: 0 [ 0.006216] CPU: Processor Core ID: 0 [ 0.006218] mce: CPU supports 7 MCE banks [ 0.008553] ACPI: Core revision 20110623 [ 0.012021] ftrace: allocating 27050 entries in 107 pages [ 0.016603] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.057967] CPU0: AMD FX(tm)-6100 Six-Core Processor stepping 02 [ 0.060003] Performance Events: AMD Family 15h PMU driver. [ 0.060003] ... version: 0 [ 0.060003] ... bit width: 48 [ 0.060003] ... generic registers: 6 [ 0.060003] ... value mask: 0000ffffffffffff [ 0.060003] ... max period: 00007fffffffffff [ 0.060003] ... fixed-purpose events: 0 [ 0.060003] ... event mask: 000000000000003f [ 0.060003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.060003] Booting Node 0, Processors #1 [ 0.060003] smpboot cpu 1: start_ip = 96000 [ 0.148031] NMI watchdog enabled, takes one hw-pmu counter. [ 0.148132] #2 [ 0.148134] smpboot cpu 2: start_ip = 96000 [ 0.240027] NMI watchdog enabled, takes one hw-pmu counter. [ 0.240089] #3 [ 0.240090] smpboot cpu 3: start_ip = 96000 [ 0.332033] NMI watchdog enabled, takes one hw-pmu counter. [ 0.332095] #4 [ 0.332096] smpboot cpu 4: start_ip = 96000 [ 0.424038] NMI watchdog enabled, takes one hw-pmu counter. [ 0.424115] #5 [ 0.424116] smpboot cpu 5: start_ip = 96000 [ 0.516043] NMI watchdog enabled, takes one hw-pmu counter. [ 0.516061] Brought up 6 CPUs [ 0.516063] Total of 6 processors activated (39775.69 BogoMIPS). [ 0.520214] devtmpfs: initialized [ 0.524379] EVM: security.selinux [ 0.524380] EVM: security.SMACK64 [ 0.524382] EVM: security.capability [ 0.524407] PM: Registering ACPI NVS region at cfdf0000 (4096 bytes) [ 0.524788] print_constraints: dummy: [ 0.524814] RTC time: 9:21:26, date: 06/05/12 [ 0.524846] NET: Registered protocol family 16 [ 0.524963] Extended Config Space enabled on 1 nodes [ 0.524992] ACPI: bus type pci registered [ 0.525046] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.525049] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.553189] PCI: Using configuration type 1 for base access [ 0.554099] bio: create slab at 0 [ 0.554099] ACPI: Added _OSI(Module Device) [ 0.554099] ACPI: Added _OSI(Processor Device) [ 0.554099] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.554099] ACPI: Added _OSI(Processor Aggregator Device) [ 0.554099] ACPI: EC: Look up EC in DSDT [ 0.563958] ACPI Warning: Incorrect checksum in table [TAMG] - 0x45, should be 0x44 (20110623/tbutils-314) [ 0.564111] ACPI: Interpreter enabled [ 0.564114] ACPI: (supports S0 S3 S4 S5) [ 0.564135] ACPI: Using IOAPIC for interrupt routing [ 0.629201] ACPI: No dock devices found. [ 0.629206] HEST: Table not found. [ 0.629212] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.629362] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.629681] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.629687] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.629693] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.629698] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.629703] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff] [ 0.629731] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600 [ 0.629754] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.629834] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604 [ 0.629899] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.629905] pci 0000:00:02.0: PME# disabled [ 0.629934] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604 [ 0.629997] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.630003] pci 0000:00:05.0: PME# disabled [ 0.630034] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604 [ 0.630097] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.630103] pci 0000:00:0a.0: PME# disabled [ 0.630144] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 [ 0.630171] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] [ 0.630185] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] [ 0.630199] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] [ 0.630214] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] [ 0.630228] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] [ 0.630242] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.630320] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.630339] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.630425] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 [ 0.630444] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.630541] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.630567] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff] [ 0.630674] pci 0000:00:12.2: supports D1 D2 [ 0.630679] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.630686] pci 0000:00:12.2: PME# disabled [ 0.630717] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.630737] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 0.630822] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 [ 0.630842] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.630934] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.630961] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff] [ 0.631068] pci 0000:00:13.2: supports D1 D2 [ 0.631072] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.631079] pci 0000:00:13.2: PME# disabled [ 0.631115] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.631246] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 0.631269] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.631283] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.631297] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.631311] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.631325] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f] [ 0.631404] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.631433] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.631520] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.631527] pci 0000:00:14.2: PME# disabled [ 0.631547] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.631650] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.631708] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.631727] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff] [ 0.631820] pci 0000:00:18.0: [1022:1600] type 0 class 0x000600 [ 0.631865] pci 0000:00:18.1: [1022:1601] type 0 class 0x000600 [ 0.631898] pci 0000:00:18.2: [1022:1602] type 0 class 0x000600 [ 0.631933] pci 0000:00:18.3: [1022:1603] type 0 class 0x000600 [ 0.631976] pci 0000:00:18.4: [1022:1604] type 0 class 0x000600 [ 0.632009] pci 0000:00:18.5: [1022:1605] type 0 class 0x000600 [ 0.632136] pci 0000:01:00.0: [10de:0607] type 0 class 0x000300 [ 0.632153] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff] [ 0.632173] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.632191] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit] [ 0.632203] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f] [ 0.632216] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.640063] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.640072] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.640079] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.640087] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.640161] pci 0000:02:00.0: [1b6f:7023] type 0 class 0x000c03 [ 0.640186] pci 0000:02:00.0: reg 10: [mem 0xfdaf8000-0xfdafffff 64bit] [ 0.640280] pci 0000:02:00.0: supports D1 D2 [ 0.640285] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.640292] pci 0000:02:00.0: PME# disabled [ 0.648065] pci 0000:00:05.0: PCI bridge to [bus 02-02] [ 0.648074] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff] [ 0.648081] pci 0000:00:05.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.648089] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.648162] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200 [ 0.648183] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff] [ 0.648212] pci 0000:03:00.0: reg 18: [mem 0xfddff000-0xfddfffff 64bit pref] [ 0.648232] pci 0000:03:00.0: reg 20: [mem 0xfddf8000-0xfddfbfff 64bit pref] [ 0.648307] pci 0000:03:00.0: supports D1 D2 [ 0.648312] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.648319] pci 0000:03:00.0: PME# disabled [ 0.656065] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 0.656074] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] [ 0.656080] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.656088] pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.656138] pci 0000:04:06.0: [1283:8212] type 0 class 0x000180 [ 0.656170] pci 0000:04:06.0: reg 10: [io 0xbf00-0xbf07] [ 0.656187] pci 0000:04:06.0: reg 14: [io 0xbe00-0xbe03] [ 0.656204] pci 0000:04:06.0: reg 18: [io 0xbd00-0xbd07] [ 0.656220] pci 0000:04:06.0: reg 1c: [io 0xbc00-0xbc03] [ 0.656236] pci 0000:04:06.0: reg 20: [io 0xbb00-0xbb0f] [ 0.656265] pci 0000:04:06.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.656368] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode) [ 0.656376] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.656384] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.656392] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.656398] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.656403] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.656409] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.656414] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.656420] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode) [ 0.656446] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.657065] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.657221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.657310] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT] [ 0.657403] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.657490] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.657497] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.657501] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.684189] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.684235] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.684280] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.684324] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.684367] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.684410] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.684454] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.684497] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.684582] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.684582] vgaarb: loaded [ 0.684582] vgaarb: bridge control possible 0000:01:00.0 [ 0.684582] i2c-core: driver [aat2870] using legacy suspend method [ 0.684582] i2c-core: driver [aat2870] using legacy resume method [ 0.684582] SCSI subsystem initialized [ 0.684644] libata version 3.00 loaded. [ 0.684644] usbcore: registered new interface driver usbfs [ 0.684644] usbcore: registered new interface driver hub [ 0.684644] usbcore: registered new device driver usb [ 0.684644] PCI: Using ACPI for IRQ routing [ 0.693652] PCI: pci_cache_line_size set to 64 bytes [ 0.693660] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 0.693737] reserve RAM buffer: 000000000009b800 - 000000000009ffff [ 0.693740] reserve RAM buffer: 00000000cfdf0000 - 00000000cfffffff [ 0.693824] NetLabel: Initializing [ 0.693825] NetLabel: domain hash size = 128 [ 0.693827] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.693837] NetLabel: unlabeled traffic allowed by default [ 0.693861] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.693861] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.694109] Switching to clocksource hpet [ 0.698626] AppArmor: AppArmor Filesystem Enabled [ 0.698641] pnp: PnP ACPI init [ 0.698652] ACPI: bus type pnp registered [ 0.698739] pnp 00:00: [bus 00-ff] [ 0.698742] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.698744] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.698746] pnp 00:00: [io 0x0d00-0xffff window] [ 0.698748] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.698750] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.698752] pnp 00:00: [mem 0xd0000000-0xfebfffff window] [ 0.698790] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.698800] pnp 00:01: [io 0x0010-0x001f] [ 0.698802] pnp 00:01: [io 0x0022-0x003f] [ 0.698804] pnp 00:01: [io 0x0044-0x005f] [ 0.698806] pnp 00:01: [io 0x0062-0x0063] [ 0.698807] pnp 00:01: [io 0x0065-0x006f] [ 0.698809] pnp 00:01: [io 0x0074-0x007f] [ 0.698811] pnp 00:01: [io 0x0091-0x0093] [ 0.698812] pnp 00:01: [io 0x00a2-0x00bf] [ 0.698814] pnp 00:01: [io 0x00e0-0x00ef] [ 0.698816] pnp 00:01: [io 0x04d0-0x04d1] [ 0.698817] pnp 00:01: [io 0x0220-0x0225] [ 0.698819] pnp 00:01: [io 0x0290-0x0294] [ 0.698867] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.698869] system 00:01: [io 0x0220-0x0225] has been reserved [ 0.698872] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.698875] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.699482] pnp 00:02: [io 0x4100-0x411f] [ 0.699485] pnp 00:02: [io 0x0228-0x022f] [ 0.699487] pnp 00:02: [io 0x040b] [ 0.699488] pnp 00:02: [io 0x04d6] [ 0.699490] pnp 00:02: [io 0x0c00-0x0c01] [ 0.699492] pnp 00:02: [io 0x0c14] [ 0.699493] pnp 00:02: [io 0x0c50-0x0c52] [ 0.699495] pnp 00:02: [io 0x0c6c-0x0c6d] [ 0.699497] pnp 00:02: [io 0x0c6f] [ 0.699498] pnp 00:02: [io 0x0cd0-0x0cd1] [ 0.699500] pnp 00:02: [io 0x0cd2-0x0cd3] [ 0.699502] pnp 00:02: [io 0x0cd4-0x0cdf] [ 0.699503] pnp 00:02: [io 0x4000-0x40fe] [ 0.699505] pnp 00:02: [io 0x4210-0x4217] [ 0.699507] pnp 00:02: [io 0x0b00-0x0b0f] [ 0.699508] pnp 00:02: [io 0x0b10-0x0b1f] [ 0.699510] pnp 00:02: [io 0x0b20-0x0b3f] [ 0.699512] pnp 00:02: [mem 0x00000000-0x00000fff window] [ 0.699515] pnp 00:02: [mem 0xfee00400-0xfee00fff window] [ 0.699521] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.699554] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.699564] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:04:06.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.699609] system 00:02: [io 0x4100-0x411f] has been reserved [ 0.699612] system 00:02: [io 0x0228-0x022f] has been reserved [ 0.699615] system 00:02: [io 0x040b] has been reserved [ 0.699617] system 00:02: [io 0x04d6] has been reserved [ 0.699619] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.699621] system 00:02: [io 0x0c14] has been reserved [ 0.699624] system 00:02: [io 0x0c50-0x0c52] has been reserved [ 0.699626] system 00:02: [io 0x0c6c-0x0c6d] has been reserved [ 0.699628] system 00:02: [io 0x0c6f] has been reserved [ 0.699630] system 00:02: [io 0x0cd0-0x0cd1] has been reserved [ 0.699632] system 00:02: [io 0x0cd2-0x0cd3] has been reserved [ 0.699635] system 00:02: [io 0x0cd4-0x0cdf] has been reserved [ 0.699637] system 00:02: [io 0x4000-0x40fe] has been reserved [ 0.699639] system 00:02: [io 0x4210-0x4217] has been reserved [ 0.699641] system 00:02: [io 0x0b00-0x0b0f] has been reserved [ 0.699644] system 00:02: [io 0x0b10-0x0b1f] has been reserved [ 0.699646] system 00:02: [io 0x0b20-0x0b3f] has been reserved [ 0.699649] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.699652] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.699755] pnp 00:03: [dma 4] [ 0.699757] pnp 00:03: [io 0x0000-0x000f] [ 0.699759] pnp 00:03: [io 0x0080-0x0090] [ 0.699761] pnp 00:03: [io 0x0094-0x009f] [ 0.699763] pnp 00:03: [io 0x00c0-0x00df] [ 0.699791] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.699845] pnp 00:04: [irq 0 disabled] [ 0.699856] pnp 00:04: [irq 8] [ 0.699858] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.699887] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.699916] pnp 00:05: [io 0x0070-0x0073] [ 0.699943] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.699951] pnp 00:06: [io 0x0061] [ 0.699979] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.699987] pnp 00:07: [io 0x00f0-0x00ff] [ 0.699995] pnp 00:07: [irq 13] [ 0.700035] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.700287] pnp 00:08: [mem 0xe0000000-0xefffffff] [ 0.700336] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.700339] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.700527] pnp 00:09: [mem 0x000d4400-0x000d7fff] [ 0.700529] pnp 00:09: [mem 0x000f0000-0x000f7fff] [ 0.700531] pnp 00:09: [mem 0x000f8000-0x000fbfff] [ 0.700532] pnp 00:09: [mem 0x000fc000-0x000fffff] [ 0.700534] pnp 00:09: [mem 0xcfdf0000-0xcfdfffff] [ 0.700536] pnp 00:09: [mem 0xffff0000-0xffffffff] [ 0.700538] pnp 00:09: [mem 0x00000000-0x0009ffff] [ 0.700540] pnp 00:09: [mem 0x00100000-0xcfdeffff] [ 0.700541] pnp 00:09: [mem 0xcfe00000-0xcfefffff] [ 0.700543] pnp 00:09: [mem 0xcff00000-0xcfffffff] [ 0.700547] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.700549] pnp 00:09: [mem 0xfec00000-0xfec00fff] [ 0.700551] pnp 00:09: [mem 0xfee00000-0xfee00fff] [ 0.700552] pnp 00:09: [mem 0xfff80000-0xfffeffff] [ 0.700556] pnp 00:09: disabling [mem 0x000d4400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.700559] pnp 00:09: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.700563] pnp 00:09: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.700566] pnp 00:09: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.700569] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.700573] pnp 00:09: disabling [mem 0x00100000-0xcfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.700604] pnp 00:09: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xe00fffff]; adding more reservations [ 0.700641] system 00:09: [mem 0xcfdf0000-0xcfdfffff] could not be reserved [ 0.700644] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved [ 0.700646] system 00:09: [mem 0xcfe00000-0xcfefffff] has been reserved [ 0.700649] system 00:09: [mem 0xcff00000-0xcfffffff] could not be reserved [ 0.700651] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.700654] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.700656] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.700659] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.700678] pnp: PnP ACPI: found 10 devices [ 0.700680] ACPI: ACPI bus type pnp unregistered [ 0.707663] PCI: max bus depth: 1 pci_try_num: 2 [ 0.707682] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref] [ 0.707685] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.707687] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.707690] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.707693] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.707697] pci 0000:00:05.0: PCI bridge to [bus 02-02] [ 0.707699] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff] [ 0.707702] pci 0000:00:05.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.707705] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.707709] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 0.707711] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] [ 0.707714] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.707717] pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.707722] pci 0000:04:06.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref] [ 0.707724] pci 0000:00:14.4: PCI bridge to [bus 04-04] [ 0.707727] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.707732] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.707736] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.707754] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.707757] pci 0000:00:02.0: setting latency timer to 64 [ 0.707769] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.707772] pci 0000:00:05.0: setting latency timer to 64 [ 0.707776] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.707779] pci 0000:00:0a.0: setting latency timer to 64 [ 0.707786] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.707788] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.707790] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.707792] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.707794] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff] [ 0.707797] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.707799] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff] [ 0.707801] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.707803] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.707805] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.707807] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.707810] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.707812] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.707814] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.707817] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 0.707819] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.707821] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref] [ 0.707823] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.707826] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.707828] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.707830] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff] [ 0.707832] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfebfffff] [ 0.707859] NET: Registered protocol family 2 [ 0.708037] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.709178] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.711085] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.711316] TCP: Hash tables configured (established 524288 bind 65536) [ 0.711318] TCP reno registered [ 0.711328] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.711353] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.711433] NET: Registered protocol family 1 [ 0.711467] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.784046] pci 0000:00:12.0: PCI INT A disabled [ 0.784063] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.860044] pci 0000:00:12.1: PCI INT A disabled [ 0.860063] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.860121] pci 0000:00:12.2: PCI INT B disabled [ 0.860134] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.936042] pci 0000:00:13.0: PCI INT A disabled [ 0.936058] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.012044] pci 0000:00:13.1: PCI INT A disabled [ 1.012078] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.012134] pci 0000:00:13.2: PCI INT B disabled [ 1.012164] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.088041] pci 0000:00:14.5: PCI INT C disabled [ 1.088089] pci 0000:01:00.0: Boot video device [ 1.088103] pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.088171] pci 0000:02:00.0: PCI INT A disabled [ 1.088184] PCI: CLS 4 bytes, default 64 [ 1.089014] PCI-DMA: Disabling AGP. [ 1.089194] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 1.089198] PCI-DMA: using GART IOMMU. [ 1.089204] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.098917] perf: AMD IBS detected (0x000000ff) [ 1.099271] audit: initializing netlink socket (disabled) [ 1.099287] type=2000 audit(1338888085.092:1): initialized [ 1.152395] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.174218] VFS: Disk quotas dquot_6.5.2 [ 1.174274] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.174777] fuse init (API version 7.17) [ 1.174867] msgmni has been set to 7898 [ 1.175322] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.175357] io scheduler noop registered [ 1.175359] io scheduler deadline registered [ 1.175387] io scheduler cfq registered (default) [ 1.175487] pcieport 0000:00:02.0: setting latency timer to 64 [ 1.175515] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 1.175553] pcieport 0000:00:05.0: setting latency timer to 64 [ 1.175576] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X [ 1.175613] pcieport 0000:00:0a.0: setting latency timer to 64 [ 1.175636] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X [ 1.175694] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.175714] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.175827] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.175831] ACPI: Power Button [PWRB] [ 1.175873] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.175876] ACPI: Power Button [PWRF] [ 1.175935] ACPI: acpi_idle registered with cpuidle [ 1.381848] ERST: Table is not found! [ 1.381852] GHES: HEST is not enabled! [ 1.382007] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.420908] Linux agpgart interface v0.103 [ 1.423803] brd: module loaded [ 1.425383] loop: module loaded [ 1.425644] ahci 0000:00:11.0: version 3.0 [ 1.425675] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.425853] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.425861] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.427343] scsi0 : ahci [ 1.427512] scsi1 : ahci [ 1.427665] scsi2 : ahci [ 1.427804] scsi3 : ahci [ 1.427950] scsi4 : ahci [ 1.428112] scsi5 : ahci [ 1.428440] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 1.428447] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 1.428453] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 1.428459] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 1.428465] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 [ 1.428471] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 [ 1.428674] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.429376] Fixed MDIO Bus: probed [ 1.429416] tun: Universal TUN/TAP device driver, 1.6 [ 1.429420] tun: (C) 1999-2004 Max Krasnyansky [ 1.429531] PPP generic driver version 2.4.2 [ 1.429715] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.429742] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.429765] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.429856] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.429868] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.429909] ehci_hcd 0000:00:12.2: debug port 1 [ 1.429944] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 1.440042] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.440282] hub 1-0:1.0: USB hub found [ 1.440290] hub 1-0:1.0: 6 ports detected [ 1.440435] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.440460] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.440552] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.440564] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.440595] ehci_hcd 0000:00:13.2: debug port 1 [ 1.440634] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 1.452041] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.452263] hub 2-0:1.0: USB hub found [ 1.452271] hub 2-0:1.0: 6 ports detected [ 1.452419] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.452442] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.452467] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.452554] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.452600] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 1.512239] hub 3-0:1.0: USB hub found [ 1.512250] hub 3-0:1.0: 3 ports detected [ 1.512387] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.512411] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.512496] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.512521] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 1.572243] hub 4-0:1.0: USB hub found [ 1.572254] hub 4-0:1.0: 3 ports detected [ 1.572381] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.572405] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.572491] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.572534] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 1.632252] hub 5-0:1.0: USB hub found [ 1.632266] hub 5-0:1.0: 3 ports detected [ 1.632402] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.632428] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.632525] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.632550] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 1.692293] hub 6-0:1.0: USB hub found [ 1.692304] hub 6-0:1.0: 3 ports detected [ 1.692436] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.692465] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.692553] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.692578] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 1.748080] ata2: SATA link down (SStatus 0 SControl 300) [ 1.748159] ata4: SATA link down (SStatus 0 SControl 300) [ 1.748197] ata5: SATA link down (SStatus 0 SControl 300) [ 1.748240] ata3: SATA link down (SStatus 0 SControl 300) [ 1.748276] ata6: SATA link down (SStatus 0 SControl 300) [ 1.752409] hub 7-0:1.0: USB hub found [ 1.752421] hub 7-0:1.0: 2 ports detected [ 1.752558] uhci_hcd: USB Universal Host Controller Interface driver [ 1.752623] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.752658] xhci_hcd 0000:02:00.0: setting latency timer to 64 [ 1.752665] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.752790] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 1.752897] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfdaf8000 [ 1.752960] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X [ 1.753171] xHCI xhci_add_endpoint called for root hub [ 1.753175] xHCI xhci_check_bandwidth called for root hub [ 1.753227] hub 8-0:1.0: USB hub found [ 1.753237] hub 8-0:1.0: 2 ports detected [ 1.753346] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.753426] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 1.753586] xHCI xhci_add_endpoint called for root hub [ 1.753590] xHCI xhci_check_bandwidth called for root hub [ 1.753640] hub 9-0:1.0: USB hub found [ 1.753649] hub 9-0:1.0: 2 ports detected [ 1.788249] usbcore: registered new interface driver libusual [ 1.788323] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.821374] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 1.821379] i8042: If AUX port is really absent please use the 'i8042.noaux' option [ 1.920051] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.967685] ata1.00: ATA-7: ST3250820AS, 3.AAD, max UDMA/133 [ 1.967691] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.026000] ata1.00: configured for UDMA/133 [ 2.026242] scsi 0:0:0:0: Direct-Access ATA ST3250820AS 3.AA PQ: 0 ANSI: 5 [ 2.026540] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.026558] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.026648] sd 0:0:0:0: [sda] Write Protect is off [ 2.026657] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.026700] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.072047] usb 3-1: new low-speed USB device number 2 using ohci_hcd [ 2.072154] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.072398] mousedev: PS/2 mouse device common for all mice [ 2.072660] rtc_cmos 00:05: RTC can wake from S4 [ 2.072817] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.072858] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.073008] device-mapper: uevent: version 1.0.3 [ 2.073143] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.073394] cpuidle: using governor ladder [ 2.073821] cpuidle: using governor menu [ 2.073825] EFI Variables Facility v0.08 2004-May-17 [ 2.074281] TCP cubic registered [ 2.074505] NET: Registered protocol family 10 [ 2.075510] NET: Registered protocol family 17 [ 2.075535] Registering the dns_resolver key type [ 2.075792] PM: Hibernation image not present or could not be loaded. [ 2.075809] registered taskstats version 1 [ 2.086395] sda: sda1 sda2 < sda5 > [ 2.087186] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.088373] Magic number: 0:151:373 [ 2.088424] vc vcsa1: hash matches [ 2.088510] rtc_cmos 00:05: setting system clock to 2012-06-05 09:21:27 UTC (1338888087) [ 2.088567] powernow-k8: Found 1 AMD FX(tm)-6100 Six-Core Processor (6 cpu cores) (version 2.20.00) [ 2.088611] powernow-k8: Core Performance Boosting: on. [ 2.088711] powernow-k8: 0 : pstate 0 (3300 MHz) [ 2.088715] powernow-k8: 1 : pstate 1 (3000 MHz) [ 2.088719] powernow-k8: 2 : pstate 2 (2400 MHz) [ 2.088723] powernow-k8: 3 : pstate 3 (1800 MHz) [ 2.088726] powernow-k8: 4 : pstate 4 (1400 MHz) [ 2.096077] Refined TSC clocksource calibration: 3314.660 MHz. [ 2.096087] Switching to clocksource tsc [ 2.098083] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.098088] EDD information not available. [ 2.129559] md: Waiting for all devices to be available before autodetect [ 2.129565] md: If you don't use raid, use raid=noautodetect [ 2.129834] md: Autodetecting RAID arrays. [ 2.129839] md: Scanned 0 and added 0 devices. [ 2.129842] md: autorun ... [ 2.129845] md: ... autorun DONE. [ 2.152582] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240) [ 2.238864] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.238886] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 2.272994] devtmpfs: mounted [ 2.278693] Freeing unused kernel memory: 920k freed [ 2.279030] Write protecting the kernel read-only data: 12288k [ 2.295664] Freeing unused kernel memory: 1608k freed [ 2.308413] Freeing unused kernel memory: 1196k freed [ 2.508033] usb 3-2: new low-speed USB device number 3 using ohci_hcd [ 2.788061] usb 2-6: new high-speed USB device number 2 using ehci_hcd [ 2.905914] init: Failed to create pty - disabling logging for job [ 2.905990] init: Temporary process spawn error: No such file or directory [ 3.192361] init: Failed to create pty - disabling logging for job [ 3.192422] init: Temporary process spawn error: No such file or directory [ 3.200044] usb 4-2: new low-speed USB device number 2 using ohci_hcd [ 3.290258] Initializing USB Mass Storage driver... [ 3.290582] scsi6 : usb-storage 2-6:1.0 [ 3.290703] usbcore: registered new interface driver usb-storage [ 3.290707] USB Mass Storage support registered. [ 3.304586] init: Failed to create pty - disabling logging for job [ 3.304641] init: Temporary process spawn error: No such file or directory [ 3.305730] init: Failed to create pty - disabling logging for job [ 3.305779] init: Temporary process spawn error: No such file or directory [ 3.488042] usb 8-1: new low-speed USB device number 2 using xhci_hcd [ 3.588773] usb 8-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3.588783] usb 8-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3.588790] usb 8-1: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes [ 4.214558] init: Failed to create pty - disabling logging for job [ 4.214627] init: Temporary process spawn error: No such file or directory [ 4.257362] init: Failed to create pty - disabling logging for job [ 4.257420] init: Temporary process spawn error: No such file or directory [ 4.294771] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 4.301281] scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 4.307888] scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 4.314651] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 4.315704] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 4.316024] sd 6:0:0:1: Attached scsi generic sg2 type 0 [ 4.316319] sd 6:0:0:2: Attached scsi generic sg3 type 0 [ 4.316625] sd 6:0:0:3: Attached scsi generic sg4 type 0 [ 4.321378] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 4.323755] sd 6:0:0:1: [sdc] Attached SCSI removable disk [ 4.324628] sd 6:0:0:2: [sdd] Attached SCSI removable disk [ 4.325503] sd 6:0:0:3: [sde] Attached SCSI removable disk [ 4.367993] init: Failed to create pty - disabling logging for job [ 4.368083] init: Temporary process spawn error: No such file or directory [ 4.383385] init: Failed to create pty - disabling logging for job [ 4.383446] init: Temporary process spawn error: No such file or directory [ 4.384652] init: Failed to create pty - disabling logging for job [ 4.384708] init: Temporary process spawn error: No such file or directory [ 4.385879] init: Failed to create pty - disabling logging for job [ 4.385933] init: Temporary process spawn error: No such file or directory [ 5.324624] init: Failed to create pty - disabling logging for job [ 5.324682] init: Temporary process spawn error: No such file or directory [ 5.346282] init: Failed to create pty - disabling logging for job [ 5.346349] init: Temporary process spawn error: No such file or directory [ 5.347677] init: Failed to create pty - disabling logging for job [ 5.347740] init: Temporary process spawn error: No such file or directory [ 5.410637] init: Failed to create pty - disabling logging for job [ 5.410731] init: Temporary process spawn error: No such file or directory [ 5.614061] udevd[204]: starting version 175 [ 5.614907] init: Failed to create pty - disabling logging for job [ 5.614976] init: Temporary process spawn error: No such file or directory [ 5.616799] init: Failed to create pty - disabling logging for job [ 5.616866] init: Temporary process spawn error: No such file or directory [ 5.618187] init: Failed to create pty - disabling logging for job [ 5.618250] init: Temporary process spawn error: No such file or directory [ 6.046917] lp: driver loaded but no devices found [ 6.285068] init: Failed to create pty - disabling logging for job [ 6.285135] init: Temporary process spawn error: No such file or directory [ 6.478240] wmi: Mapper loaded [ 6.540128] scsi7 : pata_atiixp [ 6.540312] scsi8 : pata_atiixp [ 6.541937] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 6.541944] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 6.860039] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.860067] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6.860108] r8169 0000:03:00.0: setting latency timer to 64 [ 6.860173] r8169 0000:03:00.0: irq 44 for MSI/MSI-X [ 6.861146] r8169 0000:03:00.0: eth0: RTL8168e/8111e at 0xffffc90000664000, 50:e5:49:37:cc:33, XID 0c200000 IRQ 44 [ 6.861155] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.938691] pata_it821x 0000:04:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 6.938700] pata_it821x: controller in pass through mode. [ 6.938744] pata_it821x 0000:04:06.0: setting latency timer to 64 [ 6.939477] scsi9 : pata_it821x [ 6.939697] scsi10 : pata_it821x [ 6.939819] ata9: PATA max UDMA/133 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 20 [ 6.939827] ata10: PATA max UDMA/133 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 20 [ 7.014010] MCE: In-kernel MCE decoding enabled. [ 7.116600] ata9.00: ATAPI: ATAPI DVD A DH16A1P, RG11, max UDMA/66 [ 7.116614] ata9.00: limited to UDMA/33 due to 40-wire cable [ 7.148492] ata9.00: configured for UDMA/33 [ 7.150397] scsi 9:0:0:0: CD-ROM ATAPI DVD A DH16A1P RG11 PQ: 0 ANSI: 5 [ 7.153315] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.153322] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 7.153614] sr 9:0:0:0: Attached scsi CD-ROM sr0 [ 7.153847] sr 9:0:0:0: Attached scsi generic sg5 type 5 [ 7.289424] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f] [ 7.289431] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.492092] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 7.492232] SP5100 TCO timer: mmio address 0xfec000f0 already in use [ 7.640369] EDAC MC: Ver: 2.1.0 [ 7.652874] AMD64 EDAC driver v3.4.0 [ 7.652998] EDAC amd64: DRAM ECC disabled. [ 7.653022] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 7.653027] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 7.653031] (Note that use of the override may cause unknown side effects.) [ 8.143745] type=1400 audit(1338888093.548:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=517 comm="apparmor_parser" [ 8.143767] type=1400 audit(1338888093.548:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=469 comm="apparmor_parser" [ 8.144985] type=1400 audit(1338888093.552:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=517 comm="apparmor_parser" [ 8.145004] type=1400 audit(1338888093.552:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=469 comm="apparmor_parser" [ 8.145684] type=1400 audit(1338888093.552:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=517 comm="apparmor_parser" [ 8.145703] type=1400 audit(1338888093.552:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=469 comm="apparmor_parser" [ 8.147480] init: Failed to create pty - disabling logging for job [ 8.147543] init: Temporary process spawn error: No such file or directory [ 8.427845] init: Failed to create pty - disabling logging for job [ 8.427908] init: Temporary process spawn error: No such file or directory [ 8.429513] init: Failed to create pty - disabling logging for job [ 8.429575] init: Temporary process spawn error: No such file or directory [ 8.916781] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.108089] input: 5-Axis,12-Button with POV as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2 [ 9.108297] generic-usb 0003:12BD:A02F.0001: input,hidraw0: USB HID v1.10 Joystick [5-Axis,12-Button with POV ] on usb-0000:00:12.0-1/input0 [ 9.112367] hda_codec: ALC889: BIOS auto-probing. [ 9.114252] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input3 [ 9.114478] generic-usb 0003:046D:C510.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.1-2/input0 [ 9.124597] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4 [ 9.124675] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 9.124749] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 9.124821] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 9.124893] input: HDA ATI SB Line-Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 9.124963] input: HDA ATI SB Line-Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 9.125034] input: HDA ATI SB Line-Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 9.125103] input: HDA ATI SB Line-Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 9.144595] input: Chicony USB Wireless HID Receiver as /devices/pci0000:00/0000:00:05.0/0000:02:00.0/usb8/8-1/8-1:1.0/input/input12 [ 9.144760] generic-usb 0003:04F2:0420.0003: input,hidraw2: USB HID v1.11 Keyboard [Chicony USB Wireless HID Receiver] on usb-0000:02:00.0-1/input0 [ 9.209778] input: Chicony USB Wireless HID Receiver as /devices/pci0000:00/0000:00:05.0/0000:02:00.0/usb8/8-1/8-1:1.1/input/input13 [ 9.210116] generic-usb 0003:04F2:0420.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Chicony USB Wireless HID Receiver] on usb-0000:02:00.0-1/input1 [ 9.221627] nvidia: module license 'NVIDIA' taints kernel. [ 9.221633] Disabling lock debugging due to kernel taint [ 9.234493] input: Chicony USB Wireless HID Receiver as /devices/pci0000:00/0000:00:05.0/0000:02:00.0/usb8/8-1/8-1:1.2/input/input14 [ 9.234921] generic-usb 0003:04F2:0420.0005: input,hidraw4: USB HID v1.11 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:02:00.0-1/input2 [ 9.234948] usbcore: registered new interface driver usbhid [ 9.234950] usbhid: USB HID core driver [ 9.291103] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 9.291111] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.291116] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 9.291264] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012 [ 9.895763] Adding 4190204k swap on /dev/sda5. Priority:-1 extents:1 across:4190204k [ 10.796284] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 10.850778] init: Failed to create pty - disabling logging for job [ 10.850840] init: Temporary process spawn error: No such file or directory [ 10.930033] init: Failed to create pty - disabling logging for job [ 10.930095] init: Temporary process spawn error: No such file or directory [ 10.931551] init: Failed to create pty - disabling logging for job [ 10.931609] init: Temporary process spawn error: No such file or directory [ 10.934674] init: Failed to create pty - disabling logging for job [ 10.934732] init: Temporary process spawn error: No such file or directory [ 10.936112] init: Failed to create pty - disabling logging for job [ 10.936174] init: Temporary process spawn error: No such file or directory [ 10.976403] init: Failed to create pty - disabling logging for job [ 10.976467] init: Temporary process spawn error: No such file or directory [ 11.055549] init: Failed to create pty - disabling logging for job [ 11.055612] init: Temporary process spawn error: No such file or directory [ 11.062266] init: failsafe main process (808) killed by TERM signal [ 11.794904] aiptek 3-2:1.0: Aiptek using 400 ms programming speed [ 11.795062] input: Aiptek as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input15 [ 11.795300] usbcore: registered new interface driver aiptek [ 11.795305] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x) [ 11.795309] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen [ 11.921117] init: Failed to create pty - disabling logging for job [ 11.921176] init: Temporary process spawn error: No such file or directory [ 11.923454] init: Failed to create pty - disabling logging for job [ 11.923515] init: Temporary process spawn error: No such file or directory [ 11.925759] init: Failed to create pty - disabling logging for job [ 11.925822] init: Temporary process spawn error: No such file or directory [ 11.951558] init: Failed to create pty - disabling logging for job [ 11.951628] init: Temporary process spawn error: No such file or directory [ 11.976367] init: Failed to create pty - disabling logging for job [ 11.976435] init: Temporary process spawn error: No such file or directory [ 12.066244] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 12.066251] vesafb: scrolling: redraw [ 12.066259] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 12.091637] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011300000, using 3072k, total 3072k [ 12.091922] Console: switching to colour frame buffer device 128x48 [ 12.091960] fb0: VESA VGA frame buffer device [ 12.108359] init: Failed to create pty - disabling logging for job [ 12.108425] init: Temporary process spawn error: No such file or directory [ 12.109753] init: Failed to create pty - disabling logging for job [ 12.109818] init: Temporary process spawn error: No such file or directory [ 12.113055] init: Failed to create pty - disabling logging for job [ 12.113115] init: Temporary process spawn error: No such file or directory [ 12.115471] init: Failed to create pty - disabling logging for job [ 12.115529] init: Temporary process spawn error: No such file or directory [ 12.117805] init: Failed to create pty - disabling logging for job [ 12.117866] init: Temporary process spawn error: No such file or directory [ 12.239159] ppdev: user-space parallel port driver [ 12.435818] type=1400 audit(1338888097.840:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=880 comm="apparmor_parser" [ 12.437126] type=1400 audit(1338888097.844:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=880 comm="apparmor_parser" [ 12.515518] Bluetooth: Core ver 2.16 [ 12.515550] NET: Registered protocol family 31 [ 12.515556] Bluetooth: HCI device and connection manager initialized [ 12.515563] Bluetooth: HCI socket layer initialized [ 12.515568] Bluetooth: L2CAP socket layer initialized [ 12.515580] Bluetooth: SCO socket layer initialized [ 12.731240] Bluetooth: RFCOMM TTY layer initialized [ 12.731252] Bluetooth: RFCOMM socket layer initialized [ 12.731257] Bluetooth: RFCOMM ver 1.11 [ 13.067017] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.067023] Bluetooth: BNEP filters: protocol multicast [ 16.731523] r8169 0000:03:00.0: eth0: link down [ 16.731545] r8169 0000:03:00.0: eth0: link down [ 16.732251] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.732776] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.003220] type=1400 audit(1338888102.408:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=942 comm="apparmor_parser" [ 17.003751] type=1400 audit(1338888102.408:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=942 comm="apparmor_parser" [ 17.004082] type=1400 audit(1338888102.412:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=942 comm="apparmor_parser" [ 17.004095] type=1400 audit(1338888102.412:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=946 comm="apparmor_parser" [ 17.004666] type=1400 audit(1338888102.412:14): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=946 comm="apparmor_parser" [ 17.025686] type=1400 audit(1338888102.432:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=941 comm="apparmor_parser" [ 17.033578] type=1400 audit(1338888102.440:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=948 comm="apparmor_parser" [ 17.052843] type=1400 audit(1338888102.460:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=945 comm="apparmor_parser" [ 17.054087] type=1400 audit(1338888102.460:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=945 comm="apparmor_parser" [ 17.062824] type=1400 audit(1338888102.468:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=943 comm="apparmor_parser" [ 17.509316] init: Failed to create pty - disabling logging for job [ 17.509362] init: Temporary process spawn error: No such file or directory [ 17.528932] init: Failed to create pty - disabling logging for job [ 17.528971] init: Temporary process spawn error: No such file or directory [ 17.529689] init: Failed to create pty - disabling logging for job [ 17.529722] init: Temporary process spawn error: No such file or directory [ 17.530447] init: Failed to create pty - disabling logging for job [ 17.530476] init: Temporary process spawn error: No such file or directory [ 17.531127] init: Failed to create pty - disabling logging for job [ 17.531152] init: Temporary process spawn error: No such file or directory [ 17.531850] init: Failed to create pty - disabling logging for job [ 17.531879] init: Temporary process spawn error: No such file or directory [ 17.572815] init: Failed to create pty - disabling logging for job [ 17.572852] init: Temporary process spawn error: No such file or directory [ 17.573706] init: Failed to create pty - disabling logging for job [ 17.573736] init: Temporary process spawn error: No such file or directory [ 17.577282] init: Failed to create pty - disabling logging for job [ 17.577316] init: Temporary process spawn error: No such file or directory [ 17.586343] init: Failed to create pty - disabling logging for job [ 17.586375] init: Temporary process spawn error: No such file or directory [ 17.587631] init: Failed to create pty - disabling logging for job [ 17.587662] init: Temporary process spawn error: No such file or directory [ 17.588523] init: Failed to create pty - disabling logging for job [ 17.588552] init: Temporary process spawn error: No such file or directory [ 17.589483] init: Failed to create pty - disabling logging for job [ 17.589512] init: Temporary process spawn error: No such file or directory [ 17.590299] init: Failed to create pty - disabling logging for job [ 17.590324] init: Temporary process spawn error: No such file or directory [ 17.591459] init: Failed to create pty - disabling logging for job [ 17.591498] init: Temporary process spawn error: No such file or directory [ 17.676419] init: Failed to create pty - disabling logging for job [ 17.676450] init: Temporary process spawn error: No such file or directory [ 17.940533] init: Failed to create pty - disabling logging for job [ 17.940599] init: Temporary process spawn error: No such file or directory [ 18.348014] vboxdrv: Found 6 processor cores. [ 18.348361] vboxdrv: fAsync=0 offMin=0x4ff offMax=0x53ff [ 18.348422] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 18.348424] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000). [ 18.387583] r8169 0000:03:00.0: eth0: link up [ 18.388253] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 18.784947] vboxpci: IOMMU not found (not registered) [ 24.410652] init: Failed to create pty - disabling logging for job [ 24.410683] init: Temporary process spawn error: No such file or directory [ 29.076013] eth0: no IPv6 routers present [ 8881.455166] show_signal_msg: 21 callbacks suppressed [ 8881.455177] inkscape[2440]: segfault at 180d0fbaa8 ip 0000000000847583 sp 00007fffefca3098 error 4 in inkscape[400000+c48000] [14418.400072] usb 1-6: new high-speed USB device number 5 using ehci_hcd [14418.548771] scsi11 : usb-storage 1-6:1.2 [14418.844727] Did not find alt setting 1 for intf 0, config 1 [14419.552787] scsi 11:0:0:0: Direct-Access EPSON Stylus Storage 1.00 PQ: 0 ANSI: 2 [14419.553936] sd 11:0:0:0: Attached scsi generic sg6 type 0 [14419.572643] sd 11:0:0:0: [sdf] Attached SCSI removable disk