[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-24-generic (buildd@yellow) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 (Ubuntu 3.2.0-24.37-generic 3.2.14) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=/dev/sda1 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable) [ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 00000001b0000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: System manufacturer System Product Name/M2A-VM HDMI, BIOS ASUS M2A-VM HDMI ACPI BIOS Revision 1603 11/30/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x1b0000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back [ 0.000000] 3 base 00CFF00000 mask FFFFF00000 uncachable [ 0.000000] 4 base 0100000000 mask FF80000000 write-back [ 0.000000] 5 base 0180000000 mask FFE0000000 write-back [ 0.000000] 6 base 01A0000000 mask FFF0000000 write-back [ 0.000000] 7 disabled [ 0.000000] TOM2: 00000001b0000000 aka 6912M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3327MB, range: 1MB, type UC [ 0.000000] reg 4, base: 4GB, range: 2GB, type WB [ 0.000000] reg 5, base: 6GB, range: 512MB, type WB [ 0.000000] reg 6, base: 6656MB, range: 256MB, type WB [ 0.000000] total RAM covered: 3327M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3327MB, range: 1MB, type UC [ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f6600] f6600 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000 [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cfee0000 page 4k [ 0.000000] kernel direct mapping tables up to cfee0000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-00000001b0000000 [ 0.000000] 0100000000 - 01b0000000 page 2M [ 0.000000] kernel direct mapping tables up to 1b0000000 @ cfed8000-cfee0000 [ 0.000000] ACPI: RSDP 00000000000f82b0 00024 (v02 ATI ) [ 0.000000] ACPI: XSDT 00000000cfee3100 00044 (v01 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000cfee8500 000F4 (v03 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 00000000cfee3280 05213 (v01 ATI ASUSACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000cfee0000 00040 [ 0.000000] ACPI: SSDT 00000000cfee8740 00248 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: MCFG 00000000cfee8a80 0003C (v01 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000cfee8640 00084 (v01 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000001b0000000 [ 0.000000] Initmem setup node 0 0000000000000000-00000001b0000000 [ 0.000000] NODE_DATA [00000001afffb000 - 00000001afffffff] [ 0.000000] [ffffea0000000000-ffffea0006bfffff] PMD -> [ffff8801a9600000-ffff8801af5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x001b0000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfee0 [ 0.000000] 0: 0x00100000 -> 0x001b0000 [ 0.000000] On node 0 totalpages: 1572463 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 831264 pages, LIFO batch:31 [ 0.000000] Normal zone: 11264 pages used for memmap [ 0.000000] Normal zone: 709632 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000 [ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000 [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801afc00000 s83072 r8192 d23424 u524288 [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1544810 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=/dev/sda1 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000 [ 0.000000] Memory: 6043668k/7077888k available (6566k kernel code, 788036k absent, 246184k reserved, 6637k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 50331648 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2299.884 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4599.76 BogoMIPS (lpj=9199536) [ 0.008010] pid_max: default: 32768 minimum: 301 [ 0.008040] Security Framework initialized [ 0.008056] AppArmor: AppArmor initialized [ 0.008057] Yama: becoming mindful. [ 0.009030] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.015194] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.017856] Mount-cache hash table entries: 256 [ 0.018024] Initializing cgroup subsys cpuacct [ 0.018031] Initializing cgroup subsys memory [ 0.018041] Initializing cgroup subsys devices [ 0.018043] Initializing cgroup subsys freezer [ 0.018045] Initializing cgroup subsys blkio [ 0.018055] Initializing cgroup subsys perf_event [ 0.018086] tseg: 00cff00000 [ 0.018089] CPU: Physical Processor ID: 0 [ 0.018090] CPU: Processor Core ID: 0 [ 0.018092] mce: CPU supports 5 MCE banks [ 0.018102] using AMD E400 aware idle routine [ 0.019675] ACPI: Core revision 20110623 [ 0.024040] ftrace: allocating 27049 entries in 107 pages [ 0.028709] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.068615] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02 [ 0.072003] Performance Events: AMD PMU driver. [ 0.072003] ... version: 0 [ 0.072003] ... bit width: 48 [ 0.072003] ... generic registers: 4 [ 0.072003] ... value mask: 0000ffffffffffff [ 0.072003] ... max period: 00007fffffffffff [ 0.072003] ... fixed-purpose events: 0 [ 0.072003] ... event mask: 000000000000000f [ 0.072003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.072003] Booting Node 0, Processors #1 [ 0.072003] smpboot cpu 1: start_ip = 9a000 [ 0.156151] NMI watchdog enabled, takes one hw-pmu counter. [ 0.156179] Brought up 2 CPUs [ 0.156182] Total of 2 processors activated (9199.84 BogoMIPS). [ 0.156753] devtmpfs: initialized [ 0.157845] EVM: security.selinux [ 0.157847] EVM: security.SMACK64 [ 0.157848] EVM: security.capability [ 0.157917] PM: Registering ACPI NVS region at cfee0000 (12288 bytes) [ 0.157917] print_constraints: dummy: [ 0.157917] RTC time: 3:45:37, date: 05/18/12 [ 0.157917] NET: Registered protocol family 16 [ 0.157917] node 0 link 0: io port [b000, ffff] [ 0.157917] TOM: 00000000d0000000 aka 3328M [ 0.157917] node 0 link 0: mmio [a0000, bffff] [ 0.157917] node 0 link 0: mmio [d0000000, dfffffff] [ 0.157917] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.157917] node 0 link 0: mmio [e0000000, e03fffff] [ 0.157917] TOM2: 00000001b0000000 aka 6912M [ 0.157917] bus: [00, 03] on node 0 link 0 [ 0.157917] bus: 00 index 0 [io 0x0000-0xffff] [ 0.157917] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.157917] bus: 00 index 2 [mem 0xd0000000-0xefffffff] [ 0.157917] bus: 00 index 3 [mem 0xf0000000-0xffffffff] [ 0.157917] bus: 00 index 4 [mem 0x1b0000000-0xfcffffffff] [ 0.157917] ACPI: bus type pci registered [ 0.160053] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.160057] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.185672] PCI: Using configuration type 1 for base access [ 0.187102] bio: create slab at 0 [ 0.187102] ACPI: Added _OSI(Module Device) [ 0.187102] ACPI: Added _OSI(Processor Device) [ 0.187102] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.187102] ACPI: Added _OSI(Processor Aggregator Device) [ 0.187102] ACPI: EC: Look up EC in DSDT [ 0.193507] ACPI: Interpreter enabled [ 0.193512] ACPI: (supports S0 S1 S4 S5) [ 0.193532] ACPI: Using IOAPIC for interrupt routing [ 0.197815] ACPI: No dock devices found. [ 0.197818] HEST: Table not found. [ 0.197822] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.197903] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.198071] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.198074] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.198077] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.198079] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.198082] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff] (ignored) [ 0.198091] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600 [ 0.198121] pci 0000:00:02.0: [1002:7913] type 1 class 0x000604 [ 0.198152] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.198155] pci 0000:00:02.0: PME# disabled [ 0.198174] pci 0000:00:07.0: [1002:7917] type 1 class 0x000604 [ 0.198204] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.198207] pci 0000:00:07.0: PME# disabled [ 0.198240] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101 [ 0.198261] pci 0000:00:12.0: reg 10: [io 0xfc00-0xfc07] [ 0.198271] pci 0000:00:12.0: reg 14: [io 0xf800-0xf803] [ 0.198282] pci 0000:00:12.0: reg 18: [io 0xf400-0xf407] [ 0.198292] pci 0000:00:12.0: reg 1c: [io 0xf000-0xf003] [ 0.198303] pci 0000:00:12.0: reg 20: [io 0xec00-0xec0f] [ 0.198314] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.198336] pci 0000:00:12.0: set SATA to AHCI mode [ 0.198387] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 [ 0.198402] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.198472] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 [ 0.198487] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.198560] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 [ 0.198575] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff] [ 0.198646] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 [ 0.198660] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 0.198730] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 [ 0.198745] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.198822] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 [ 0.198842] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff] [ 0.198930] pci 0000:00:13.5: supports D1 D2 [ 0.198932] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.198936] pci 0000:00:13.5: PME# disabled [ 0.198960] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.198983] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f] [ 0.198994] pci 0000:00:14.0: reg 14: [mem 0xfed00000-0xfed003ff] [ 0.199079] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 [ 0.199097] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.199107] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.199117] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.199128] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.199138] pci 0000:00:14.1: reg 20: [io 0xe400-0xe40f] [ 0.199205] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.199230] pci 0000:00:14.2: reg 10: [mem 0xfe020000-0xfe023fff 64bit] [ 0.199311] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.199316] pci 0000:00:14.2: PME# disabled [ 0.199334] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 [ 0.199416] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.199467] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.199487] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.199503] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.199520] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.199546] PCI: peer root bus 00 res updated from pci conf [ 0.199583] pci 0000:01:00.0: [10de:0640] type 0 class 0x000300 [ 0.199593] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff] [ 0.199605] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.199616] pci 0000:01:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit] [ 0.199624] pci 0000:01:00.0: reg 24: [io 0xcc00-0xcc7f] [ 0.199632] pci 0000:01:00.0: reg 30: [mem 0xf7f80000-0xf7ffffff pref] [ 0.204027] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.204031] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.204034] pci 0000:00:02.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.204038] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.204080] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.204095] pci 0000:02:00.0: reg 10: [io 0xdc00-0xdcff] [ 0.204120] pci 0000:02:00.0: reg 18: [mem 0xfddff000-0xfddfffff 64bit] [ 0.204149] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.204211] pci 0000:02:00.0: supports D1 D2 [ 0.204213] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.204218] pci 0000:02:00.0: PME# disabled [ 0.204237] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.204245] pci 0000:00:07.0: PCI bridge to [bus 02-02] [ 0.204248] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.204251] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.204255] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.204291] pci 0000:03:05.0: [10ec:8169] type 0 class 0x000200 [ 0.204314] pci 0000:03:05.0: reg 10: [io 0xbc00-0xbcff] [ 0.204327] pci 0000:03:05.0: reg 14: [mem 0xfcfff000-0xfcfff0ff] [ 0.204384] pci 0000:03:05.0: reg 30: [mem 0xfcfc0000-0xfcfdffff pref] [ 0.204421] pci 0000:03:05.0: supports D1 D2 [ 0.204424] pci 0000:03:05.0: PME# supported from D1 D2 D3hot D3cold [ 0.204429] pci 0000:03:05.0: PME# disabled [ 0.204457] pci 0000:03:06.0: [14f1:8800] type 0 class 0x000400 [ 0.204483] pci 0000:03:06.0: reg 10: [mem 0xf9000000-0xf9ffffff] [ 0.204618] pci 0000:03:06.1: [14f1:8801] type 0 class 0x000480 [ 0.204640] pci 0000:03:06.1: reg 10: [mem 0xf8000000-0xf8ffffff] [ 0.204761] pci 0000:03:06.2: [14f1:8802] type 0 class 0x000480 [ 0.204784] pci 0000:03:06.2: reg 10: [mem 0xfb000000-0xfbffffff] [ 0.204907] pci 0000:03:06.4: [14f1:8804] type 0 class 0x000480 [ 0.204929] pci 0000:03:06.4: reg 10: [mem 0xfa000000-0xfaffffff] [ 0.205056] pci 0000:03:07.0: [1106:3044] type 0 class 0x000c00 [ 0.205080] pci 0000:03:07.0: reg 10: [mem 0xfcffe000-0xfcffe7ff] [ 0.205094] pci 0000:03:07.0: reg 14: [io 0xb800-0xb87f] [ 0.205236] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.205241] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.205246] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfcffffff] [ 0.205250] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfdffffff pref] [ 0.205253] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.205256] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.205259] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xefffffff] (subtractive decode) [ 0.205262] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode) [ 0.205265] pci 0000:00:14.4: bridge window [mem 0x1b0000000-0xfcffffffff] (subtractive decode) [ 0.205278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.205493] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.205591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.205638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 0.205679] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.205682] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.205684] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.222814] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.222868] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.222921] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.222973] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.223025] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11) [ 0.223076] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11) [ 0.223127] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11) [ 0.223178] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.223422] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.223422] vgaarb: loaded [ 0.223422] vgaarb: bridge control possible 0000:01:00.0 [ 0.223422] i2c-core: driver [aat2870] using legacy suspend method [ 0.223422] i2c-core: driver [aat2870] using legacy resume method [ 0.223422] SCSI subsystem initialized [ 0.223422] libata version 3.00 loaded. [ 0.223422] usbcore: registered new interface driver usbfs [ 0.223422] usbcore: registered new interface driver hub [ 0.223422] usbcore: registered new device driver usb [ 0.224017] PCI: Using ACPI for IRQ routing [ 0.234013] PCI: pci_cache_line_size set to 64 bytes [ 0.234311] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.234314] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff [ 0.234438] NetLabel: Initializing [ 0.234440] NetLabel: domain hash size = 128 [ 0.234442] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.234455] NetLabel: unlabeled traffic allowed by default [ 0.244487] AppArmor: AppArmor Filesystem Enabled [ 0.244520] pnp: PnP ACPI init [ 0.244538] ACPI: bus type pnp registered [ 0.244681] pnp 00:00: [bus 00-ff] [ 0.244684] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.244687] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.244689] pnp 00:00: [io 0x0d00-0xffff window] [ 0.244692] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.244695] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.244697] pnp 00:00: [mem 0xd0000000-0xfebfffff window] [ 0.244761] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.244853] pnp 00:01: [io 0x4100-0x411f] [ 0.244855] pnp 00:01: [io 0x0228-0x022f] [ 0.244858] pnp 00:01: [io 0x040b] [ 0.244859] pnp 00:01: [io 0x04d6] [ 0.244862] pnp 00:01: [io 0x0c00-0x0c01] [ 0.244867] pnp 00:01: [io 0x0c14] [ 0.244869] pnp 00:01: [io 0x0c50-0x0c52] [ 0.244871] pnp 00:01: [io 0x0c6c-0x0c6d] [ 0.244874] pnp 00:01: [io 0x0c6f] [ 0.244876] pnp 00:01: [io 0x0cd0-0x0cd1] [ 0.244878] pnp 00:01: [io 0x0cd2-0x0cd3] [ 0.244880] pnp 00:01: [io 0x0cd4-0x0cdf] [ 0.244882] pnp 00:01: [io 0x4000-0x40fe] [ 0.244884] pnp 00:01: [io 0x4210-0x4217] [ 0.244887] pnp 00:01: [io 0x0b00-0x0b0f] [ 0.244889] pnp 00:01: [io 0x0b10-0x0b1f] [ 0.244891] pnp 00:01: [mem 0x00000000-0x00000fff window] [ 0.244894] pnp 00:01: [mem 0xfee00400-0xfee00fff window] [ 0.244941] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.244987] system 00:01: [io 0x4100-0x411f] has been reserved [ 0.244990] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.244993] system 00:01: [io 0x040b] has been reserved [ 0.244995] system 00:01: [io 0x04d6] has been reserved [ 0.244998] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.245001] system 00:01: [io 0x0c14] has been reserved [ 0.245003] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.245006] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.245009] system 00:01: [io 0x0c6f] has been reserved [ 0.245011] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.245014] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.245017] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.245020] system 00:01: [io 0x4000-0x40fe] has been reserved [ 0.245023] system 00:01: [io 0x4210-0x4217] has been reserved [ 0.245026] system 00:01: [io 0x0b00-0x0b0f] has been reserved [ 0.245029] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.245033] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.245037] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.245158] pnp 00:02: [dma 4] [ 0.245160] pnp 00:02: [io 0x0000-0x000f] [ 0.245163] pnp 00:02: [io 0x0080-0x0090] [ 0.245165] pnp 00:02: [io 0x0094-0x009f] [ 0.245167] pnp 00:02: [io 0x00c0-0x00df] [ 0.245199] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.245250] pnp 00:03: [io 0x0070-0x0073] [ 0.245265] pnp 00:03: [irq 8] [ 0.245295] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.245305] pnp 00:04: [io 0x0061] [ 0.245340] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.245350] pnp 00:05: [io 0x00f0-0x00ff] [ 0.245360] pnp 00:05: [irq 13] [ 0.245392] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.245436] pnp 00:06: [io 0x0010-0x001f] [ 0.245438] pnp 00:06: [io 0x0022-0x003f] [ 0.245440] pnp 00:06: [io 0x0044-0x005f] [ 0.245442] pnp 00:06: [io 0x0062-0x0063] [ 0.245444] pnp 00:06: [io 0x0065-0x006f] [ 0.245446] pnp 00:06: [io 0x0074-0x007f] [ 0.245448] pnp 00:06: [io 0x0091-0x0093] [ 0.245451] pnp 00:06: [io 0x00a2-0x00bf] [ 0.245453] pnp 00:06: [io 0x00e0-0x00ef] [ 0.245455] pnp 00:06: [io 0x04d0-0x04d1] [ 0.245457] pnp 00:06: [io 0x0220-0x0225] [ 0.245520] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.245523] system 00:06: [io 0x0220-0x0225] has been reserved [ 0.245526] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.245688] pnp 00:07: [io 0x03f0-0x03f5] [ 0.245690] pnp 00:07: [io 0x03f7] [ 0.245700] pnp 00:07: [irq 6] [ 0.245702] pnp 00:07: [dma 2] [ 0.245753] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.245971] pnp 00:08: [io 0x03f8-0x03ff] [ 0.245980] pnp 00:08: [irq 4] [ 0.246049] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.246390] pnp 00:09: [io 0x0378-0x037f] [ 0.246400] pnp 00:09: [irq 7] [ 0.246458] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.246607] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 0.246669] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.246672] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.246863] pnp 00:0b: [mem 0x000cde00-0x000cffff] [ 0.246866] pnp 00:0b: [mem 0x000f0000-0x000f7fff] [ 0.246868] pnp 00:0b: [mem 0x000f8000-0x000fbfff] [ 0.246870] pnp 00:0b: [mem 0x000fc000-0x000fffff] [ 0.246872] pnp 00:0b: [mem 0xcfef0000-0xcffeffff] [ 0.246875] pnp 00:0b: [mem 0xfed00000-0xfed000ff] [ 0.246877] pnp 00:0b: [mem 0xcfee0000-0xcfefffff] [ 0.246879] pnp 00:0b: [mem 0xffff0000-0xffffffff] [ 0.246882] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.246884] pnp 00:0b: [mem 0x00100000-0xcfedffff] [ 0.246887] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.246889] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.246892] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 0.246894] pnp 00:0b: [mem 0xfff80000-0xfffeffff] [ 0.246913] pnp 00:0b: disabling [mem 0xfed00000-0xfed000ff] because it overlaps 0000:00:14.0 BAR 1 [mem 0xfed00000-0xfed003ff] [ 0.246978] system 00:0b: [mem 0x000cde00-0x000cffff] has been reserved [ 0.246982] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.246985] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.246988] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.246992] system 00:0b: [mem 0xcfef0000-0xcffeffff] could not be reserved [ 0.246995] system 00:0b: [mem 0xcfee0000-0xcfefffff] could not be reserved [ 0.246998] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved [ 0.247001] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.247004] system 00:0b: [mem 0x00100000-0xcfedffff] could not be reserved [ 0.247008] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.247011] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.247014] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.247017] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.247026] pnp: PnP ACPI: found 12 devices [ 0.247028] ACPI: ACPI bus type pnp unregistered [ 0.253785] Switching to clocksource acpi_pm [ 0.253826] PCI: max bus depth: 1 pci_try_num: 2 [ 0.253849] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.253852] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.253856] pci 0000:00:02.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.253859] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.253867] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref] [ 0.253870] pci 0000:00:07.0: PCI bridge to [bus 02-02] [ 0.253873] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.253876] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.253880] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.253887] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.253890] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.253896] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfcffffff] [ 0.253902] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfdffffff pref] [ 0.253915] pci 0000:00:02.0: setting latency timer to 64 [ 0.253921] pci 0000:00:07.0: setting latency timer to 64 [ 0.253930] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.253933] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.253935] pci_bus 0000:00: resource 6 [mem 0xd0000000-0xefffffff] [ 0.253938] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xffffffff] [ 0.253941] pci_bus 0000:00: resource 8 [mem 0x1b0000000-0xfcffffffff] [ 0.253943] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.253946] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7ffffff] [ 0.253949] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.253952] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.253954] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.253957] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.253960] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] [ 0.253963] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfcffffff] [ 0.253966] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff pref] [ 0.253968] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] [ 0.253971] pci_bus 0000:03: resource 5 [mem 0x000a0000-0x000bffff] [ 0.253974] pci_bus 0000:03: resource 6 [mem 0xd0000000-0xefffffff] [ 0.253976] pci_bus 0000:03: resource 7 [mem 0xf0000000-0xffffffff] [ 0.253979] pci_bus 0000:03: resource 8 [mem 0x1b0000000-0xfcffffffff] [ 0.254027] NET: Registered protocol family 2 [ 0.254338] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.255246] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.260496] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.261078] TCP: Hash tables configured (established 524288 bind 65536) [ 0.261081] TCP reno registered [ 0.261105] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.261200] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.261390] NET: Registered protocol family 1 [ 0.261441] pci 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.392030] pci 0000:00:13.0: PCI INT A disabled [ 0.392051] pci 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.456029] pci 0000:00:13.1: PCI INT B disabled [ 0.456047] pci 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.508028] pci 0000:00:13.2: PCI INT C disabled [ 0.508037] pci 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.548027] pci 0000:00:13.3: PCI INT B disabled [ 0.548036] pci 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.576028] pci 0000:00:13.4: PCI INT C disabled [ 0.576047] pci 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.576071] pci 0000:00:13.5: PCI INT D disabled [ 0.576112] pci 0000:01:00.0: Boot video device [ 0.576136] PCI: CLS 32 bytes, default 64 [ 0.577723] PCI-DMA: Disabling AGP. [ 0.577826] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 0.577828] PCI-DMA: using GART IOMMU. [ 0.577832] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.581819] audit: initializing netlink socket (disabled) [ 0.581832] type=2000 audit(1337312736.576:1): initialized [ 0.629041] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.676728] VFS: Disk quotas dquot_6.5.2 [ 0.676795] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.677424] fuse init (API version 7.17) [ 0.677539] msgmni has been set to 11932 [ 0.678045] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.678090] io scheduler noop registered [ 0.678093] io scheduler deadline registered [ 0.678152] io scheduler cfq registered (default) [ 0.678326] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.678361] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 0.678468] pcieport 0000:00:07.0: setting latency timer to 64 [ 0.678495] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X [ 0.678592] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.678622] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.678772] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.678778] ACPI: Power Button [PWRB] [ 0.678832] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.678836] ACPI: Power Button [PWRF] [ 0.678888] ACPI: Fan [FAN] (on) [ 0.680547] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110623/nspredef-463) [ 0.680554] ACPI: [Package] has zero elements (ffff8801a531eec0) [ 0.680555] ACPI: Invalid passive threshold [ 0.680763] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.680765] ACPI: Thermal Zone [THRM] (40 C) [ 0.680805] ERST: Table is not found! [ 0.680807] GHES: HEST is not enabled! [ 0.680904] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.701409] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.824660] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.836276] Linux agpgart interface v0.103 [ 0.838280] brd: module loaded [ 0.839350] loop: module loaded [ 0.839616] ahci 0000:00:12.0: version 3.0 [ 0.839642] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.839668] ahci 0000:00:12.0: ASUS M2A-VM: enabling 64bit DMA [ 0.839769] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.839773] ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 0.840674] scsi0 : ahci [ 0.840797] scsi1 : ahci [ 0.840893] scsi2 : ahci [ 0.840993] scsi3 : ahci [ 0.841144] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 0.841148] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 0.841152] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 0.841155] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 0.841362] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.841932] Fixed MDIO Bus: probed [ 0.841957] tun: Universal TUN/TAP device driver, 1.6 [ 0.841959] tun: (C) 1999-2004 Max Krasnyansky [ 0.842045] PPP generic driver version 2.4.2 [ 0.842195] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.842258] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.842283] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 0.842366] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 0.842397] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 0.842413] ehci_hcd 0000:00:13.5: debug port 1 [ 0.842447] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 [ 0.852019] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 0.852199] hub 1-0:1.0: USB hub found [ 0.852204] hub 1-0:1.0: 10 ports detected [ 0.852337] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.852397] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.852413] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.852474] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 0.852507] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 [ 0.912140] hub 2-0:1.0: USB hub found [ 0.912147] hub 2-0:1.0: 2 ports detected [ 0.912278] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.912292] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 0.912350] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 0.912384] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 [ 0.972138] hub 3-0:1.0: USB hub found [ 0.972144] hub 3-0:1.0: 2 ports detected [ 0.972265] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.972279] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 0.972335] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 0.972367] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 [ 1.032142] hub 4-0:1.0: USB hub found [ 1.032149] hub 4-0:1.0: 2 ports detected [ 1.032279] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.032293] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 1.032353] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 1.032369] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 [ 1.092147] hub 5-0:1.0: USB hub found [ 1.092154] hub 5-0:1.0: 2 ports detected [ 1.092279] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.092295] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 1.092352] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 1.092371] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 [ 1.152153] hub 6-0:1.0: USB hub found [ 1.152160] hub 6-0:1.0: 2 ports detected [ 1.152250] uhci_hcd: USB Universal Host Controller Interface driver [ 1.152337] usbcore: registered new interface driver libusual [ 1.152386] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.152798] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.152804] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.152942] mousedev: PS/2 mouse device common for all mice [ 1.153114] rtc_cmos 00:03: RTC can wake from S4 [ 1.153236] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.153268] rtc0: alarms up to one month, 242 bytes nvram [ 1.153366] device-mapper: uevent: version 1.0.3 [ 1.153453] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.153462] cpuidle: using governor ladder [ 1.153463] cpuidle: using governor menu [ 1.153465] EFI Variables Facility v0.08 2004-May-17 [ 1.153701] TCP cubic registered [ 1.153830] NET: Registered protocol family 10 [ 1.154327] NET: Registered protocol family 17 [ 1.154347] Registering the dns_resolver key type [ 1.154499] PM: Hibernation image not present or could not be loaded. [ 1.154512] registered taskstats version 1 [ 1.160036] ata4: SATA link down (SStatus 0 SControl 300) [ 1.160079] ata3: SATA link down (SStatus 0 SControl 300) [ 1.178603] Magic number: 12:895:765 [ 1.178723] rtc_cmos 00:03: setting system clock to 2012-05-18 03:45:38 UTC (1337312738) [ 1.178732] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2 cpu cores) (version 2.20.00) [ 1.178778] powernow-k8: fid 0xf (2300 MHz), vid 0xa [ 1.178780] powernow-k8: fid 0xe (2200 MHz), vid 0xb [ 1.178782] powernow-k8: fid 0xc (2000 MHz), vid 0xd [ 1.178784] powernow-k8: fid 0xa (1800 MHz), vid 0xf [ 1.178786] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 1.178859] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.178862] EDD information not available. [ 1.336023] ata2: softreset failed (device not ready) [ 1.336027] ata2: applying PMP SRST workaround and retrying [ 1.336045] ata1: softreset failed (device not ready) [ 1.336049] ata1: applying PMP SRST workaround and retrying [ 1.444024] usb 1-7: new high-speed USB device number 5 using ehci_hcd [ 1.508037] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.508064] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.508950] ata1.00: ATA-8: WDC WD2500AAKX-753CA1, 19.01H19, max UDMA/133 [ 1.508954] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.508958] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.509685] ata2.00: ATAPI: Optiarc DVD RW AD-7261S, 1.03, max UDMA/100 [ 1.509688] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.510889] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.510892] ata1.00: configured for UDMA/133 [ 1.511062] scsi 0:0:0:0: Direct-Access ATA WDC WD2500AAKX-7 19.0 PQ: 0 ANSI: 5 [ 1.511235] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.511262] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.511297] sd 0:0:0:0: [sda] Write Protect is off [ 1.511300] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.511327] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.511594] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.511597] ata2.00: configured for UDMA/100 [ 1.513430] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7261S 1.03 PQ: 0 ANSI: 5 [ 1.515510] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.515513] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.515650] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.515728] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.547225] sda: sda1 sda2 < sda5 > [ 1.547700] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.547732] md: Waiting for all devices to be available before autodetect [ 1.547735] md: If you don't use raid, use raid=noautodetect [ 1.547897] md: Autodetecting RAID arrays. [ 1.547899] md: Scanned 0 and added 0 devices. [ 1.547901] md: autorun ... [ 1.547902] md: ... autorun DONE. [ 1.575058] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240) [ 1.602557] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 1.602560] EXT4-fs (sda1): write access will be enabled during recovery [ 1.952025] usb 3-1: new low-speed USB device number 2 using ohci_hcd [ 2.384047] usb 3-2: new full-speed USB device number 3 using ohci_hcd [ 2.824041] usb 2-2: new full-speed USB device number 2 using ohci_hcd [ 3.260022] usb 5-2: new full-speed USB device number 2 using ohci_hcd [ 4.255396] EXT4-fs (sda1): recovery complete [ 4.255874] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.255894] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 4.369692] devtmpfs: mounted [ 4.371536] Freeing unused kernel memory: 920k freed [ 4.371968] Write protecting the kernel read-only data: 12288k [ 4.378048] Freeing unused kernel memory: 1608k freed [ 4.383288] Freeing unused kernel memory: 1196k freed [ 5.199935] init: Failed to create pty - disabling logging for job [ 5.199987] init: Temporary process spawn error: No such file or directory [ 5.275379] init: Failed to create pty - disabling logging for job [ 5.275425] init: Temporary process spawn error: No such file or directory [ 5.317821] init: Failed to create pty - disabling logging for job [ 5.317862] init: Temporary process spawn error: No such file or directory [ 5.318639] init: Failed to create pty - disabling logging for job [ 5.318680] init: Temporary process spawn error: No such file or directory [ 6.088164] init: Failed to create pty - disabling logging for job [ 6.088213] init: Temporary process spawn error: No such file or directory [ 6.132705] init: Failed to create pty - disabling logging for job [ 6.132750] init: Temporary process spawn error: No such file or directory [ 6.274686] init: Failed to create pty - disabling logging for job [ 6.274732] init: Temporary process spawn error: No such file or directory [ 6.286054] init: Failed to create pty - disabling logging for job [ 6.286099] init: Temporary process spawn error: No such file or directory [ 6.286993] init: Failed to create pty - disabling logging for job [ 6.287040] init: Temporary process spawn error: No such file or directory [ 6.288037] init: Failed to create pty - disabling logging for job [ 6.288083] init: Temporary process spawn error: No such file or directory [ 7.191419] init: Failed to create pty - disabling logging for job [ 7.191466] init: Temporary process spawn error: No such file or directory [ 7.322809] init: Failed to create pty - disabling logging for job [ 7.322857] init: Temporary process spawn error: No such file or directory [ 7.324757] init: Failed to create pty - disabling logging for job [ 7.324805] init: Temporary process spawn error: No such file or directory [ 7.409228] init: Failed to create pty - disabling logging for job [ 7.409276] init: Temporary process spawn error: No such file or directory [ 7.520644] udevd[194]: starting version 175 [ 7.520816] init: Failed to create pty - disabling logging for job [ 7.520869] init: Temporary process spawn error: No such file or directory [ 7.522137] init: Failed to create pty - disabling logging for job [ 7.522184] init: Temporary process spawn error: No such file or directory [ 7.523152] init: Failed to create pty - disabling logging for job [ 7.523205] init: Temporary process spawn error: No such file or directory [ 8.686526] lp: driver loaded but no devices found [ 9.804996] parport_pc 00:09: reported by Plug and Play ACPI [ 9.805031] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 9.900305] lp0: using parport0 (interrupt-driven). [ 9.962708] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 9.962737] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 9.962774] r8169 0000:02:00.0: setting latency timer to 64 [ 9.962836] r8169 0000:02:00.0: irq 42 for MSI/MSI-X [ 9.963437] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90000c68000, 00:1b:fc:1f:8b:a5, XID 18000000 IRQ 42 [ 9.963441] r8169 0000:02:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 9.963534] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 9.963563] r8169 0000:03:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 9.963581] r8169 0000:03:05.0: (unregistered net_device): not PCI Express [ 9.964085] r8169 0000:03:05.0: eth1: RTL8169sb/8110sb at 0xffffc90000c6a000, 00:e0:4c:50:22:1f, XID 10000000 IRQ 20 [ 9.964089] r8169 0000:03:05.0: eth1: jumbo features [frames: 7152 bytes, tx checksumming: ok] [ 10.075889] ppdev: user-space parallel port driver [ 10.123587] init: Failed to create pty - disabling logging for job [ 10.123646] init: Temporary process spawn error: No such file or directory [ 10.295322] Floppy drive(s): fd0 is 1.44M [ 10.315823] FDC 0 is a post-1991 82077 [ 10.319459] scsi4 : pata_atiixp [ 10.319595] scsi5 : pata_atiixp [ 10.320046] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14 [ 10.320049] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15 [ 10.464323] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 10.543282] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 10.785239] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 10.785339] SP5100 TCO timer: mmio address 0xfec000f0 already in use [ 10.837562] MCE: In-kernel MCE decoding enabled. [ 10.864650] EDAC MC: Ver: 2.1.0 [ 11.210055] firewire_ohci 0000:03:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 11.272074] firewire_ohci: Added fw-ohci device 0000:03:07.0, OHCI v1.0, 4 IR + 8 IT contexts, quirks 0x11 [ 11.320131] AMD64 EDAC driver v3.4.0 [ 11.320680] EDAC amd64: DRAM ECC disabled. [ 11.320690] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 11.320691] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 11.320692] (Note that use of the override may cause unknown side effects.) [ 11.403076] Linux video capture interface: v2.00 [ 11.772148] firewire_core: created device fw0: GUID 0000000000000000, S400 [ 12.355254] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded [ 12.357090] cx88[0]: subsystem: 7063:5500, board: pcHDTV HD5500 HDTV [card=47,autodetected], frontend(s): 1 [ 12.357094] cx88[0]: TV tuner type 64, Radio tuner type -1 [ 12.536840] cx2388x alsa driver version 0.0.9 loaded [ 12.875572] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded [ 12.917710] IR NEC protocol handler initialized [ 13.105157] i2c-core: driver [tuner] using legacy suspend method [ 13.105160] i2c-core: driver [tuner] using legacy resume method [ 13.116135] input: Saitek Saitek P2900 Wireless Pad as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input2 [ 13.116244] generic-usb 0003:06A3:040C.0001: input,hidraw0: USB HID v1.11 Gamepad [Saitek Saitek P2900 Wireless Pad] on usb-0000:00:13.1-1/input0 [ 13.193414] usbcore: registered new interface driver usbserial [ 13.193429] USB Serial support registered for generic [ 13.202563] generic-usb 0003:051D:0002.0002: hiddev0,hidraw1: USB HID v1.00 Device [American Power Conversion Back-UPS BX1000G FW:869.L2 .D USB FW:L2 ] on usb-0000:00:13.1-2/input0 [ 13.202640] usbcore: registered new interface driver usbserial_generic [ 13.202643] usbserial: USB Serial Driver core [ 13.203468] usbcore: registered new interface driver usbhid [ 13.203472] usbhid: USB HID core driver [ 13.224046] usbcore: registered new interface driver uas [ 13.255408] input: ORTEK W/L Keyboard/Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input3 [ 13.255519] ortek 0003:05A4:1700.0003: input,hidraw2: USB HID v1.10 Keyboard [ORTEK W/L Keyboard/Mouse] on usb-0000:00:13.0-2/input0 [ 13.260462] IR RC5(x) protocol handler initialized [ 13.262204] input: ORTEK W/L Keyboard/Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.1/input/input4 [ 13.263997] ortek 0003:05A4:1700.0004: input,hidraw3: USB HID v1.10 Mouse [ORTEK W/L Keyboard/Mouse] on usb-0000:00:13.0-2/input1 [ 13.582265] IR RC6 protocol handler initialized [ 13.629719] USB Serial support registered for FTDI USB Serial Device [ 13.629820] ftdi_sio 5-2:1.0: FTDI USB Serial Device converter detected [ 13.629871] usb 5-2: Detected FT232RL [ 13.629873] usb 5-2: Number of endpoints 2 [ 13.629875] usb 5-2: Endpoint 1 MaxPacketSize 64 [ 13.629877] usb 5-2: Endpoint 2 MaxPacketSize 64 [ 13.629884] usb 5-2: Setting MaxPacketSize 64 [ 13.632159] usb 5-2: FTDI USB Serial Device converter now attached to ttyUSB0 [ 13.632181] usbcore: registered new interface driver ftdi_sio [ 13.632183] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver [ 13.711052] type=1400 audit(1337312751.026:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=396 comm="apparmor_parser" [ 13.711074] type=1400 audit(1337312751.026:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=394 comm="apparmor_parser" [ 13.711562] type=1400 audit(1337312751.026:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=396 comm="apparmor_parser" [ 13.711590] type=1400 audit(1337312751.026:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=394 comm="apparmor_parser" [ 13.711851] type=1400 audit(1337312751.026:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=396 comm="apparmor_parser" [ 13.711891] type=1400 audit(1337312751.026:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=394 comm="apparmor_parser" [ 13.712624] type=1400 audit(1337312751.030:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=395 comm="apparmor_parser" [ 13.713112] init: Failed to create pty - disabling logging for job [ 13.713145] type=1400 audit(1337312751.030:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=395 comm="apparmor_parser" [ 13.713162] init: Temporary process spawn error: No such file or directory [ 13.713435] type=1400 audit(1337312751.030:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=395 comm="apparmor_parser" [ 13.844546] init: Failed to create pty - disabling logging for job [ 13.844603] init: Temporary process spawn error: No such file or directory [ 13.846406] init: Failed to create pty - disabling logging for job [ 13.846450] init: Temporary process spawn error: No such file or directory [ 13.847513] init: Failed to create pty - disabling logging for job [ 13.847565] init: Temporary process spawn error: No such file or directory [ 13.870430] IR JVC protocol handler initialized [ 13.875014] tda9887 1-0043: creating new instance [ 13.875017] tda9887 1-0043: tda988[5/6/7] found [ 13.875963] tuner 1-0043: Tuner 74 found with type(s) Radio TV. [ 13.878712] tuner 1-0061: Tuner -1 found with type(s) Radio TV. [ 14.268667] init: Failed to create pty - disabling logging for job [ 14.268716] init: Temporary process spawn error: No such file or directory [ 14.306293] nvidia: module license 'NVIDIA' taints kernel. [ 14.306298] Disabling lock debugging due to kernel taint [ 14.343133] IR Sony protocol handler initialized [ 14.405862] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.405936] snd_hda_intel 0000:00:14.2: irq 43 for MSI/MSI-X [ 14.561097] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 14.561108] nvidia 0000:01:00.0: setting latency timer to 64 [ 14.561113] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 14.561413] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012 [ 14.659301] IR MCE Keyboard/mouse protocol handler initialized [ 14.759859] lirc_dev: IR Remote Control driver registered, major 249 [ 14.787310] IR LIRC bridge handler initialized [ 14.789147] tuner-simple 1-0061: creating new instance [ 14.789152] tuner-simple 1-0061: type set to 64 (LG TDVS-H06xF) [ 14.856023] Registered IR keymap rc-hauppauge [ 14.856146] input: cx88 IR (pcHDTV HD5500 HDTV) as /devices/pci0000:00/0000:00:14.4/0000:03:06.2/rc/rc0/input5 [ 14.856217] rc0: cx88 IR (pcHDTV HD5500 HDTV) as /devices/pci0000:00/0000:00:14.4/0000:03:06.2/rc/rc0 [ 14.856337] input: MCE IR Keyboard/Mouse (cx88xx) as /devices/virtual/input/input6 [ 14.856452] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0 [ 14.856456] cx88[0]/2: cx2388x 8802 Driver Manager [ 14.856488] cx88-mpeg driver manager 0000:03:06.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 14.856498] cx88[0]/2: found at 0000:03:06.2, rev: 5, irq: 21, latency: 64, mmio: 0xfb000000 [ 14.864776] cx88_audio 0000:03:06.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 14.864805] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 14.865247] cx8800 0000:03:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 14.865253] cx88[0]/0: found at 0000:03:06.0, rev: 5, irq: 21, latency: 64, mmio: 0xf9000000 [ 14.868191] cx88[0]/0: registered device video0 [v4l2] [ 14.868265] cx88[0]/0: registered device vbi0 [ 15.271544] cx88/2: cx2388x dvb driver version 0.0.9 loaded [ 15.271548] cx88/2: registering cx8802 driver, type: dvb access: shared [ 15.271553] cx88[0]/2: subsystem: 7063:5500, board: pcHDTV HD5500 HDTV [card=47] [ 15.271556] cx88[0]/2: cx2388x based DVB/ATSC card [ 15.271558] cx8802_alloc_frontends() allocating 1 frontend(s) [ 15.761837] tuner-simple 1-0061: attaching existing instance [ 15.761842] tuner-simple 1-0061: type set to 64 (LG TDVS-H06xF) [ 15.761854] tda9887 1-0043: attaching existing instance [ 15.762795] DVB: registering new adapter (cx88[0]) [ 15.762799] DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... [ 15.797347] init: Failed to create pty - disabling logging for job [ 15.797398] init: Temporary process spawn error: No such file or directory [ 16.182187] Adding 6288380k swap on /dev/sda5. Priority:-1 extents:1 across:6288380k [ 17.277061] init: Failed to create pty - disabling logging for job [ 17.277111] init: Temporary process spawn error: No such file or directory [ 17.464935] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 17.464939] vesafb: scrolling: redraw [ 17.464943] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 17.465416] vesafb: framebuffer at 0xf5000000, mapped to 0xffffc90011c00000, using 1216k, total 1216k [ 17.466515] Console: switching to colour frame buffer device 80x30 [ 17.466532] fb0: VESA VGA frame buffer device [ 17.467787] init: Failed to create pty - disabling logging for job [ 17.467837] init: Temporary process spawn error: No such file or directory [ 18.233732] init: Failed to create pty - disabling logging for job [ 18.233779] init: Temporary process spawn error: No such file or directory [ 18.604297] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 21.349826] init: Failed to create pty - disabling logging for job [ 21.349876] init: Temporary process spawn error: No such file or directory [ 21.518405] init: Failed to create pty - disabling logging for job [ 21.518457] init: Temporary process spawn error: No such file or directory [ 21.519551] init: Failed to create pty - disabling logging for job [ 21.519601] init: Temporary process spawn error: No such file or directory [ 21.521588] init: Failed to create pty - disabling logging for job [ 21.521636] init: Temporary process spawn error: No such file or directory [ 21.525540] init: Failed to create pty - disabling logging for job [ 21.525591] init: Temporary process spawn error: No such file or directory [ 21.531323] init: Failed to create pty - disabling logging for job [ 21.531375] init: Temporary process spawn error: No such file or directory [ 21.534730] init: Failed to create pty - disabling logging for job [ 21.534784] init: Temporary process spawn error: No such file or directory [ 21.535814] init: Failed to create pty - disabling logging for job [ 21.535868] init: Temporary process spawn error: No such file or directory [ 21.541608] init: Failed to create pty - disabling logging for job [ 21.541652] init: Temporary process spawn error: No such file or directory [ 21.542884] init: Failed to create pty - disabling logging for job [ 21.542937] init: Temporary process spawn error: No such file or directory [ 21.570308] init: Failed to create pty - disabling logging for job [ 21.570357] init: Temporary process spawn error: No such file or directory [ 21.701157] RPC: Registered named UNIX socket transport module. [ 21.701161] RPC: Registered udp transport module. [ 21.701163] RPC: Registered tcp transport module. [ 21.701165] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 21.858442] init: failsafe main process (627) killed by TERM signal [ 21.862458] init: Failed to create pty - disabling logging for job [ 21.862506] init: Temporary process spawn error: No such file or directory [ 22.129249] FS-Cache: Loaded [ 22.329611] FS-Cache: Netfs 'nfs' registered for caching [ 22.350557] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 22.758934] init: statd-mounting main process (636) killed by TERM signal [ 23.904649] type=1400 audit(1337312761.222:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=864 comm="apparmor_parser" [ 23.905203] type=1400 audit(1337312761.222:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=864 comm="apparmor_parser" [ 23.905499] type=1400 audit(1337312761.222:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=864 comm="apparmor_parser" [ 23.977003] type=1400 audit(1337312761.294:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=863 comm="apparmor_parser" [ 24.033535] type=1400 audit(1337312761.350:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=872 comm="apparmor_parser" [ 24.034124] type=1400 audit(1337312761.350:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=872 comm="apparmor_parser" [ 24.271608] type=1400 audit(1337312761.586:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=865 comm="apparmor_parser" [ 24.278286] type=1400 audit(1337312761.594:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=865 comm="apparmor_parser" [ 24.280074] type=1400 audit(1337312761.598:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=865 comm="apparmor_parser" [ 24.281544] type=1400 audit(1337312761.598:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=865 comm="apparmor_parser" [ 24.331603] init: Failed to create pty - disabling logging for job [ 24.331654] init: Temporary process spawn error: No such file or directory [ 24.333905] init: Failed to create pty - disabling logging for job [ 24.333952] init: Temporary process spawn error: No such file or directory [ 24.399161] init: Failed to create pty - disabling logging for job [ 24.399212] init: Temporary process spawn error: No such file or directory [ 24.433802] init: Failed to create pty - disabling logging for job [ 24.433852] init: Temporary process spawn error: No such file or directory [ 24.480106] init: Failed to create pty - disabling logging for job [ 24.480152] init: Temporary process spawn error: No such file or directory [ 25.581610] init: Failed to create pty - disabling logging for job [ 25.581668] init: Temporary process spawn error: No such file or directory [ 25.598709] Bluetooth: Core ver 2.16 [ 25.598754] NET: Registered protocol family 31 [ 25.598757] Bluetooth: HCI device and connection manager initialized [ 25.598760] Bluetooth: HCI socket layer initialized [ 25.598763] Bluetooth: L2CAP socket layer initialized [ 25.598769] Bluetooth: SCO socket layer initialized [ 25.626704] init: Failed to create pty - disabling logging for job [ 25.626753] init: Temporary process spawn error: No such file or directory [ 25.628581] init: Failed to create pty - disabling logging for job [ 25.628637] init: Temporary process spawn error: No such file or directory [ 25.629906] init: Failed to create pty - disabling logging for job [ 25.629960] init: Temporary process spawn error: No such file or directory [ 25.631571] init: Failed to create pty - disabling logging for job [ 25.631624] init: Temporary process spawn error: No such file or directory [ 25.634085] init: Failed to create pty - disabling logging for job [ 25.634144] init: Temporary process spawn error: No such file or directory [ 25.648835] Bluetooth: RFCOMM TTY layer initialized [ 25.648841] Bluetooth: RFCOMM socket layer initialized [ 25.648843] Bluetooth: RFCOMM ver 1.11 [ 25.851451] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 25.851455] Bluetooth: BNEP filters: protocol multicast [ 25.919682] init: Failed to create pty - disabling logging for job [ 25.919735] init: Temporary process spawn error: No such file or directory [ 25.924866] init: Failed to create pty - disabling logging for job [ 25.924919] init: Temporary process spawn error: No such file or directory [ 25.980444] init: Failed to create pty - disabling logging for job [ 25.980497] init: Temporary process spawn error: No such file or directory [ 26.009895] init: Failed to create pty - disabling logging for job [ 26.009946] init: Temporary process spawn error: No such file or directory [ 26.011392] init: Failed to create pty - disabling logging for job [ 26.011440] init: Temporary process spawn error: No such file or directory [ 26.014261] init: Failed to create pty - disabling logging for job [ 26.014311] init: Temporary process spawn error: No such file or directory [ 26.016267] init: Failed to create pty - disabling logging for job [ 26.016326] init: Temporary process spawn error: No such file or directory [ 26.018601] init: Failed to create pty - disabling logging for job [ 26.018647] init: Temporary process spawn error: No such file or directory [ 26.022001] init: Failed to create pty - disabling logging for job [ 26.022051] init: Temporary process spawn error: No such file or directory [ 26.026022] init: Failed to create pty - disabling logging for job [ 26.026076] init: Temporary process spawn error: No such file or directory [ 26.083076] init: Failed to create pty - disabling logging for job [ 26.083131] init: Temporary process spawn error: No such file or directory [ 26.818605] init: Failed to create pty - disabling logging for job [ 26.818657] init: Temporary process spawn error: No such file or directory [ 30.839582] r8169 0000:02:00.0: eth0: link down [ 30.840782] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.841170] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.876659] r8169 0000:03:05.0: eth1: link down [ 30.876667] r8169 0000:03:05.0: eth1: link down [ 30.877836] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 30.878217] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 32.455014] r8169 0000:03:05.0: eth1: link up [ 32.456238] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 38.495212] init: Failed to create pty - disabling logging for job [ 38.495266] init: Temporary process spawn error: No such file or directory [ 38.510303] init: plymouth-stop pre-start process (1549) terminated with status 1 [ 43.184022] eth1: no IPv6 routers present [499912.910785] NVRM: Xid (0000:01:00): 13, 0003 00000000 00008297 00001458 01000004 00000003 [590896.270958] NVRM: Xid (0000:01:00): 13, 0003 00000000 0000502d 00000860 3f800000 00000100