Hello, this Kevin. ============================================================================================================ My PC Info. CPU: Intel E2160 M/B: Gigabyte GA-G31M-S2L http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID=2693 Lan: Realtek RTL 8111C chip (10/100/1000 Mbit) (This is on board network card.) ============================================================================================================ I've just installed Ubuntu 8.04 beta version and now can't use network at all. (Actually I upgraded from 7.10 to 8.04 beta.) r8169 driver is loaded yet I don't think it supports Realteck RTL8111C network chip. I had the exactly same problem when I first installed Ubuntu 7.10 yet it was solved after I manually installed r8168 driver from Realtek and removed the old one (r8169) as well as putting r8169 in blacklist. I downloaded the driver from here: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false#2 This file: ftp://210.51.181.211/cn/nic/r8168-8.005.00.tar.bz2 It solved my problem for Ubuntu 7.10 but now I have the same one after installing Ubuntu 8.04 beta. So I tried same thing that I did for 7.10 yet this time I got error messages. I followed these instruction: # make clean modules (as root or with sudo) # make install # depmod -a # insmod ./src/r8168.ko Result: ======================================================================================================================== $ sudo make clean modules make -C src/ clean make[1]: Entering directory `/home/blade2/Desktop/r8168-8.005.00/src' rm -rf *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags .tmp_versions Module.symvers Modules.symvers rset make[1]: Leaving directory `/home/blade2/Desktop/r8168-8.005.00/src' make -C src/ modules make[1]: Entering directory `/home/blade2/Desktop/r8168-8.005.00/src' make -C /lib/modules/2.6.24-15-generic/build SUBDIRS=/src modules make[2]: Entering directory `/usr/src/linux-headers-2.6.24-15-generic' scripts/Makefile.build:41: /src/Makefile: No such file or directory make[3]: *** No rule to make target `/src/Makefile'. Stop. make[2]: *** [_module_/src] Error 2 make[2]: Leaving directory `/usr/src/linux-headers-2.6.24-15-generic' make[1]: *** [modules] Error 2 make[1]: Leaving directory `/home/blade2/Desktop/r8168-8.005.00/src' make: *** [modules] Error 2 $ sudo make install make -C src/ install make[1]: Entering directory `/home/blade2/Desktop/r8168-8.005.00/src' install -m 744 -c r8168.ko /lib/modules/2.6.24-15-generic/kernel/drivers/net/ install: cannot stat `r8168.ko': No such file or directory make[1]: *** [install] Error 1 make[1]: Leaving directory `/home/blade2/Desktop/r8168-8.005.00/src' make: *** [install] Error 2 ======================================================================================================================== Just in case, I also include the contents of /var/log/dmesg ======================================================================================================================== [ 0.000000] Linux version 2.6.24-15-generic (buildd@rothera) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Apr 4 03:48:31 UTC 2008 (Ubuntu 2.6.24-15.26-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f5e0000 (usable) [ 0.000000] BIOS-e820: 000000007f5e0000 - 000000007f5e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f5e3000 - 000000007f5f0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f5f0000 - 000000007f600000 (reserved) [ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 1141MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f4f50 [ 0.000000] Entering add_active_range(0, 0, 521696) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 521696 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 521696 [ 0.000000] On node 0 totalpages: 521696 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2283 pages used for memmap [ 0.000000] HighMem zone: 290037 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6920 checksum 0 [ 0.000000] ACPI: RSDP 000F6920, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT 7F5E3040, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: FACP 7F5E30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: DSDT 7F5E3180, 40DF (r1 GBT GBTUACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 7F5E0000, 0040 [ 0.000000] ACPI: HPET 7F5E73C0, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) [ 0.000000] ACPI: MCFG 7F5E7440, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: APIC 7F5E72C0, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: SSDT 7F5E74C0, 015C (r1 PmRef Cpu0Ist 3000 INTL 20040311) [ 0.000000] ACPI: SSDT 7F5E7950, 0275 (r1 PmRef CpuPm 3000 INTL 20040311) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f600000:40a00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517621 [ 0.000000] Kernel command line: root=UUID=12d2cf09-6f14-4cae-854f-d49f3144e68e ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1800.007 MHz processor. [ 30.284550] Console: colour VGA+ 80x25 [ 30.284553] console [tty0] enabled [ 30.284775] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 30.285019] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 30.372648] Memory: 2056532k/2086784k available (2164k kernel code, 28996k reserved, 1006k data, 364k init, 1169280k highmem) [ 30.372654] virtual kernel memory layout: [ 30.372655] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 30.372657] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 30.372658] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 30.372659] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 30.372660] .init : 0xc041f000 - 0xc047a000 ( 364 kB) [ 30.372661] .data : 0xc031d2ad - 0xc0418dc4 (1006 kB) [ 30.372662] .text : 0xc0100000 - 0xc031d2ad (2164 kB) [ 30.372665] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 30.372702] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 30.372836] hpet clockevent registered [ 30.452716] Calibrating delay using timer specific routine.. 3602.88 BogoMIPS (lpj=7205767) [ 30.452736] Security Framework initialized [ 30.452742] SELinux: Disabled at boot. [ 30.452753] AppArmor: AppArmor initialized [ 30.452758] Failure registering capabilities with primary security module. [ 30.452765] Mount-cache hash table entries: 512 [ 30.452877] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 30.452886] monitor/mwait feature present. [ 30.452887] using mwait in idle threads. [ 30.452891] CPU: L1 I cache: 32K, L1 D cache: 32K [ 30.452893] CPU: L2 cache: 1024K [ 30.452895] CPU: Physical Processor ID: 0 [ 30.452897] CPU: Processor Core ID: 0 [ 30.452898] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 30.452906] Compat vDSO mapped to ffffe000. [ 30.452918] Checking 'hlt' instruction... OK. [ 30.469101] SMP alternatives: switching to UP code [ 30.470628] Early unpacking initramfs... done [ 30.800717] ACPI: Core revision 20070126 [ 30.800754] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 30.804742] CPU0: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d [ 30.804758] SMP alternatives: switching to SMP code [ 30.805425] Booting processor 1/1 eip 3000 [ 30.815465] Initializing CPU#1 [ 30.896014] Calibrating delay using timer specific routine.. 3600.00 BogoMIPS (lpj=7200013) [ 30.896020] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 30.896026] monitor/mwait feature present. [ 30.896029] CPU: L1 I cache: 32K, L1 D cache: 32K [ 30.896031] CPU: L2 cache: 1024K [ 30.896033] CPU: Physical Processor ID: 0 [ 30.896034] CPU: Processor Core ID: 1 [ 30.896035] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 30.896415] CPU1: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d [ 30.896434] Total of 2 processors activated (7202.89 BogoMIPS). [ 30.896577] ENABLING IO-APIC IRQs [ 30.896741] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 31.043878] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 31.063860] Brought up 2 CPUs [ 31.063882] CPU0 attaching sched-domain: [ 31.063884] domain 0: span 03 [ 31.063886] groups: 01 02 [ 31.063889] CPU1 attaching sched-domain: [ 31.063890] domain 0: span 03 [ 31.063892] groups: 02 01 [ 31.064080] net_namespace: 64 bytes [ 31.064091] Booting paravirtualized kernel on bare hardware [ 31.064521] Time: 19:50:20 Date: 04/05/08 [ 31.064568] NET: Registered protocol family 16 [ 31.064736] EISA bus registered [ 31.064741] ACPI: bus type pci registered [ 31.070743] PCI: PCI BIOS revision 3.00 entry at 0xfaf30, last bus=3 [ 31.070745] PCI: Using configuration type 1 [ 31.070747] Setting up standard PCI resources [ 31.072380] ACPI: EC: Look up EC in DSDT [ 31.076299] ACPI: Interpreter enabled [ 31.076304] ACPI: (supports S0 S3 S4 S5) [ 31.076322] ACPI: Using IOAPIC for interrupt routing [ 31.080579] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 31.081127] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 31.081130] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 31.081501] PCI: Transparent bridge - 0000:00:1e.0 [ 31.081527] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 31.081658] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 31.081725] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 31.081796] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 31.091100] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 31.091192] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 31.091281] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 31.091371] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 31.091460] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 31.091550] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 31.091640] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 31.091733] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 31.091851] Linux Plug and Play Support v0.97 (c) Adam Belay [ 31.091878] pnp: PnP ACPI init [ 31.091885] ACPI: bus type pnp registered [ 31.094138] pnpacpi: exceeded the max number of mem resources: 12 [ 31.094264] pnp: PnP ACPI: found 15 devices [ 31.094266] ACPI: ACPI bus type pnp unregistered [ 31.094270] PnPBIOS: Disabled by ACPI PNP [ 31.094473] PCI: Using ACPI for IRQ routing [ 31.094475] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 31.131717] NET: Registered protocol family 8 [ 31.131720] NET: Registered protocol family 20 [ 31.131761] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 31.131767] hpet0: 3 64-bit timers, 14318180 Hz [ 31.132797] AppArmor: AppArmor Filesystem Enabled [ 31.135711] Time: tsc clocksource has been installed. [ 31.135721] Switched to high resolution mode on CPU 0 [ 31.135813] Switched to high resolution mode on CPU 1 [ 31.151719] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 31.151723] system 00:01: ioport range 0x290-0x29f has been reserved [ 31.151727] system 00:01: ioport range 0x800-0x87f has been reserved [ 31.151731] system 00:01: ioport range 0x290-0x294 has been reserved [ 31.151734] system 00:01: ioport range 0x880-0x88f has been reserved [ 31.151750] system 00:0b: ioport range 0x400-0x4bf could not be reserved [ 31.151759] system 00:0c: iomem range 0xc0000000-0xcfffffff could not be reserved [ 31.151767] system 00:0d: iomem range 0xcb400-0xcbfff has been reserved [ 31.151771] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved [ 31.151775] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 31.151778] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 31.151782] system 00:0d: iomem range 0x7f5e0000-0x7f5fffff could not be reserved [ 31.151786] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 31.151790] system 00:0d: iomem range 0x100000-0x7f5dffff could not be reserved [ 31.151794] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved [ 31.151798] system 00:0d: iomem range 0xfed13000-0xfed1dfff could not be reserved [ 31.151802] system 00:0d: iomem range 0xfed20000-0xfed8ffff could not be reserved [ 31.151806] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved [ 31.151810] system 00:0d: iomem range 0xffb00000-0xffb7ffff could not be reserved [ 31.182146] PCI: Bridge: 0000:00:1c.0 [ 31.182149] IO window: c000-cfff [ 31.182153] MEM window: disabled. [ 31.182156] PREFETCH window: disabled. [ 31.182161] PCI: Bridge: 0000:00:1c.1 [ 31.182164] IO window: d000-dfff [ 31.182168] MEM window: e0000000-e0ffffff [ 31.182171] PREFETCH window: e1100000-e11fffff [ 31.182176] PCI: Bridge: 0000:00:1e.0 [ 31.182178] IO window: b000-bfff [ 31.182182] MEM window: disabled. [ 31.182185] PREFETCH window: disabled. [ 31.182209] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 31.182215] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 31.182232] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 31.182236] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 31.182246] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 31.182256] NET: Registered protocol family 2 [ 31.219638] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 31.219870] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 31.220279] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 31.220530] TCP: Hash tables configured (established 131072 bind 65536) [ 31.220532] TCP reno registered [ 31.231734] checking if image is initramfs... it is [ 31.881515] Freeing initrd memory: 7694k freed [ 31.882176] audit: initializing netlink socket (disabled) [ 31.882188] audit(1207425020.385:1): initialized [ 31.882378] highmem bounce pool size: 64 pages [ 31.884134] VFS: Disk quotas dquot_6.5.1 [ 31.884200] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 31.884323] io scheduler noop registered [ 31.884325] io scheduler anticipatory registered [ 31.884327] io scheduler deadline registered [ 31.884337] io scheduler cfq registered (default) [ 31.884346] Boot video device is 0000:00:02.0 [ 31.884499] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 31.884538] assign_interrupt_mode Found MSI capability [ 31.884571] Allocate Port Service[0000:00:1c.0:pcie00] [ 31.884601] Allocate Port Service[0000:00:1c.0:pcie02] [ 31.884673] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 31.884711] assign_interrupt_mode Found MSI capability [ 31.884742] Allocate Port Service[0000:00:1c.1:pcie00] [ 31.884770] Allocate Port Service[0000:00:1c.1:pcie02] [ 31.884975] isapnp: Scanning for PnP cards... [ 32.237692] isapnp: No Plug & Play device found [ 32.260348] Real Time Clock Driver v1.12ac [ 32.260488] hpet_resources: 0xfed00000 is busy [ 32.260523] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 32.260635] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 32.261194] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 32.261916] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 32.261980] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 32.262077] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 32.262401] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 32.262407] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 32.289960] mice: PS/2 mouse device common for all mice [ 32.290084] EISA: Probing bus 0 at eisa.0 [ 32.290113] EISA: Detected 0 cards. [ 32.290116] cpuidle: using governor ladder [ 32.290118] cpuidle: using governor menu [ 32.290191] NET: Registered protocol family 1 [ 32.290215] Using IPI No-Shortcut mode [ 32.290239] registered taskstats version 1 [ 32.290314] Magic number: 4:166:849 [ 32.290348] hash matches device ptyv1 [ 32.290373] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 32.290375] EDD information not available. [ 32.290513] Freeing unused kernel memory: 364k freed [ 32.306857] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 33.508542] fuse init (API version 7.9) [ 33.527814] ACPI: Processor [CPU0] (supports 8 throttling states) [ 33.527926] ACPI: SSDT 7F5E78C0, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311) [ 33.528058] ACPI: Processor [CPU1] (supports 8 throttling states) [ 33.528072] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 33.528083] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 33.713975] usbcore: registered new interface driver usbfs [ 33.714001] usbcore: registered new interface driver hub [ 33.714458] usbcore: registered new device driver usb [ 33.725211] USB Universal Host Controller Interface driver v3.0 [ 33.725268] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18 [ 33.725278] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 33.725282] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 33.725471] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 33.725499] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000e100 [ 33.725624] usb usb1: configuration #1 chosen from 1 choice [ 33.725646] hub 1-0:1.0: USB hub found [ 33.725650] hub 1-0:1.0: 2 ports detected [ 33.831459] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 33.831469] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 33.831473] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 33.831496] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 33.831521] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200 [ 33.831628] usb usb2: configuration #1 chosen from 1 choice [ 33.831649] hub 2-0:1.0: USB hub found [ 33.831654] hub 2-0:1.0: 2 ports detected [ 33.875423] SCSI subsystem initialized [ 33.894325] libata version 3.00 loaded. [ 33.935281] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 [ 33.935292] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 33.935296] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 33.935317] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 33.935343] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e300 [ 33.935443] usb usb3: configuration #1 chosen from 1 choice [ 33.935465] hub 3-0:1.0: USB hub found [ 33.935470] hub 3-0:1.0: 2 ports detected [ 34.039100] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 34.039112] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 34.039115] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 34.039140] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 34.039168] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 [ 34.039273] usb usb4: configuration #1 chosen from 1 choice [ 34.039294] hub 4-0:1.0: USB hub found [ 34.039299] hub 4-0:1.0: 2 ports detected [ 34.143039] r8169 Gigabit Ethernet driver 2.2LK loaded [ 34.143061] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 34.143077] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 34.143346] eth0: RTL8168c/8111c at 0xf885a000, 00:1d:7d:ab:91:42, XID 3c2000c0 IRQ 221 [ 34.991057] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18 [ 34.991070] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 34.991074] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 34.991107] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 34.994997] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 34.995004] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xe1284000 [ 35.009453] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 35.009601] usb usb5: configuration #1 chosen from 1 choice [ 35.009629] hub 5-0:1.0: USB hub found [ 35.009635] hub 5-0:1.0: 8 ports detected [ 35.113535] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 35.113568] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 35.113580] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 35.120747] ata_piix 0000:00:1f.2: version 2.12 [ 35.120754] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 35.120771] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 35.120797] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 35.121222] scsi0 : ata_piix [ 35.121936] scsi1 : ata_piix [ 35.122503] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 35.122506] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 35.492865] ata1.00: HPA unlocked: 625140335 -> 625142448, native 625142448 [ 35.492871] ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 [ 35.492875] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 35.517282] ata1.01: ATA-8: WDC WD5000AAKS-22YGA0, 12.01C02, max UDMA/133 [ 35.517289] ata1.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 35.561137] ata1.00: configured for UDMA/133 [ 35.577296] ata1.01: configured for UDMA/133 [ 35.905517] ata2.00: ATA-6: WDC WD1600JD-00HBB0, 08.02D08, max UDMA/133 [ 35.905523] ata2.00: 312581808 sectors, multi 16: LBA48 [ 35.905559] ata2.01: ATAPI: Optiarc DVD RW AD-7200S, 1.04, max UDMA/100 [ 35.921502] ata2.00: configured for UDMA/133 [ 36.091906] ata2.01: configured for UDMA/100 [ 36.092020] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 36.092137] scsi 0:0:1:0: Direct-Access ATA WDC WD5000AAKS-2 12.0 PQ: 0 ANSI: 5 [ 36.092248] scsi 1:0:0:0: Direct-Access ATA WDC WD1600JD-00H 08.0 PQ: 0 ANSI: 5 [ 36.093997] scsi 1:0:1:0: CD-ROM Optiarc DVD RW AD-7200S 1.04 PQ: 0 ANSI: 5 [ 36.100908] Driver 'sd' needs updating - please use bus_type methods [ 36.100982] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 36.100993] sd 0:0:0:0: [sda] Write Protect is off [ 36.100996] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 36.101012] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.101055] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 36.101064] sd 0:0:0:0: [sda] Write Protect is off [ 36.101066] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 36.101082] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.101085] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 36.116357] sda1 sda2 < sda5 sda6 sda7 > [ 36.155356] sd 0:0:0:0: [sda] Attached SCSI disk [ 36.155413] sd 0:0:1:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 36.155424] sd 0:0:1:0: [sdb] Write Protect is off [ 36.155426] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 36.155443] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.155490] sd 0:0:1:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 36.155500] sd 0:0:1:0: [sdb] Write Protect is off [ 36.155502] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 36.155518] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.155521] sdb: sdb1 [ 36.159937] sd 0:0:1:0: [sdb] Attached SCSI disk [ 36.160005] sd 1:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB) [ 36.160021] sd 1:0:0:0: [sdc] Write Protect is off [ 36.160024] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 36.160048] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.160101] sd 1:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB) [ 36.160111] sd 1:0:0:0: [sdc] Write Protect is off [ 36.160113] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 36.160131] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.160134] sdc: sdc1 sdc2 < sdc5 > [ 36.201770] sd 1:0:0:0: [sdc] Attached SCSI disk [ 36.207622] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 36.207642] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 36.207665] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 36.207683] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 36.226545] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 36.226550] Uniform CD-ROM driver Revision: 3.20 [ 36.226604] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 36.422973] Attempting manual resume [ 36.422976] swsusp: Resume From Partition 8:7 [ 36.422977] PM: Checking swsusp image. [ 36.423126] PM: Resume from disk failed. [ 36.468186] kjournald starting. Commit interval 5 seconds [ 36.468198] EXT3-fs: mounted filesystem with ordered data mode. [ 42.656078] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 43.262651] iTCO_vendor_support: vendor-support=0 [ 43.318803] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 43.347699] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 43.376524] Linux agpgart interface v0.102 [ 43.388990] agpgart: Detected an Intel G33 Chipset. [ 43.389496] agpgart: Detected 7164K stolen memory. [ 43.402579] agpgart: AGP aperture is 256M @ 0xd0000000 [ 43.432919] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 43.452941] input: Power Button (FF) as /devices/virtual/input/input3 [ 43.512720] ACPI: Power Button (FF) [PWRF] [ 43.512781] input: Power Button (CM) as /devices/virtual/input/input4 [ 43.556649] ACPI: Power Button (CM) [PWRB] [ 43.749987] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 43.801903] parport_pc 00:08: reported by Plug and Play ACPI [ 43.801947] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 43.812268] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 43.812298] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 43.912915] intel_rng: FWH not detected [ 44.352285] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 44.352304] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 44.388117] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS... [ 45.344389] lp0: using parport0 (interrupt-driven). [ 45.417370] Adding 4000144k swap on /dev/sda7. Priority:-1 extents:1 across:4000144k [ 46.013504] EXT3 FS on sda1, internal journal [ 46.166921] device-mapper: uevent: version 1.0.3 [ 46.166948] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: