[ 0.000000] Linux version 2.6.24-15-generic (buildd@crested) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Apr 4 03:10:59 UTC 2008 (Ubuntu 2.6.24-15.26-generic) [ 0.000000] Command line: root=UUID=1df1d8ff-a060-48b0-9a84-48bbb42810cf ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ed15000 (usable) [ 0.000000] BIOS-e820: 000000007ed15000 - 000000007ed17000 (reserved) [ 0.000000] BIOS-e820: 000000007ed17000 - 000000007edd0000 (usable) [ 0.000000] BIOS-e820: 000000007edd0000 - 000000007ee9e000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ee9e000 - 000000007eea1000 (ACPI data) [ 0.000000] BIOS-e820: 000000007eea1000 - 000000007eeea000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007eeea000 - 000000007eef2000 (ACPI data) [ 0.000000] BIOS-e820: 000000007eef2000 - 000000007eef3000 (usable) [ 0.000000] BIOS-e820: 000000007eef3000 - 000000007eeff000 (ACPI data) [ 0.000000] BIOS-e820: 000000007eeff000 - 000000007ef00000 (usable) [ 0.000000] BIOS-e820: 000000007ef00000 - 000000007f000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 519445) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 519447, 519632) 2 entries of 3200 used [ 0.000000] Entering add_active_range(0, 519922, 519923) 3 entries of 3200 used [ 0.000000] Entering add_active_range(0, 519935, 519936) 4 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FE020 checksum 0 [ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL ) [ 0.000000] ACPI: RSDT 7EEFD038, 0068 (r1 INTEL DP35DP 19D 1000013) [ 0.000000] ACPI: FACP 7EEFC000, 0074 (r1 INTEL DP35DP 19D MSFT 1000013) [ 0.000000] ACPI: DSDT 7EEF8000, 3DAD (r1 INTEL DP35DP 19D MSFT 1000013) [ 0.000000] ACPI: FACS 7EEA1000, 0040 [ 0.000000] ACPI: APIC 7EEF7000, 0078 (r1 INTEL DP35DP 19D MSFT 1000013) [ 0.000000] ACPI: WDDT 7EEF6000, 0040 (r1 INTEL DP35DP 19D MSFT 1000013) [ 0.000000] ACPI: MCFG 7EEF5000, 003C (r1 INTEL DP35DP 19D MSFT 1000013) [ 0.000000] ACPI: ASF! 7EEF4000, 00A6 (r32 INTEL DP35DP 19D MSFT 1000013) [ 0.000000] ACPI: HPET 7EEF3000, 0038 (r1 INTEL DP35DP 19D MSFT 1000013) [ 0.000000] ACPI: ASPT 7EEF1000, 002C (r1 INTEL DP35DP 19D MSFT 1000013) [ 0.000000] ACPI: WDTT 7EEF0000, 02CC (r1 INTEL DP35DP 19D MSFT 1000013) [ 0.000000] ACPI: SSDT 7EEEF000, 0204 (r1 INTEL CpuPm 19D MSFT 1000013) [ 0.000000] ACPI: SSDT 7EEEE000, 01F9 (r1 INTEL Cpu0Ist 19D MSFT 1000013) [ 0.000000] ACPI: SSDT 7EEED000, 01F9 (r1 INTEL Cpu1Ist 19D MSFT 1000013) [ 0.000000] ACPI: SSDT 7EEEC000, 01F9 (r1 INTEL Cpu2Ist 19D MSFT 1000013) [ 0.000000] ACPI: SSDT 7EEEB000, 01F9 (r1 INTEL Cpu3Ist 19D MSFT 1000013) [ 0.000000] ACPI: SSDT 7EEEA000, 00DD (r1 INTEL Cpu0Cst 19D MSFT 1000013) [ 0.000000] ACPI: SSDT 7EEA0000, 00DD (r1 INTEL Cpu1Cst 19D MSFT 1000013) [ 0.000000] ACPI: SSDT 7EE9F000, 00DD (r1 INTEL Cpu2Cst 19D MSFT 1000013) [ 0.000000] ACPI: SSDT 7EE9E000, 00DD (r1 INTEL Cpu3Cst 19D MSFT 1000013) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007ef00000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 519445) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 519447, 519632) 2 entries of 3200 used [ 0.000000] Entering add_active_range(0, 519922, 519923) 3 entries of 3200 used [ 0.000000] Entering add_active_range(0, 519935, 519936) 4 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ef00000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[5] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 519445 [ 0.000000] 0: 519447 -> 519632 [ 0.000000] 0: 519922 -> 519923 [ 0.000000] 0: 519935 -> 519936 [ 0.000000] On node 0 totalpages: 519535 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1210 pages reserved [ 0.000000] DMA zone: 2733 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7052 pages used for memmap [ 0.000000] DMA32 zone: 508484 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 000000007ed15000 - 000000007ed17000 [ 0.000000] swsusp: Registered nosave memory region: 000000007edd0000 - 000000007ee9e000 [ 0.000000] swsusp: Registered nosave memory region: 000000007ee9e000 - 000000007eea1000 [ 0.000000] swsusp: Registered nosave memory region: 000000007eea1000 - 000000007eeea000 [ 0.000000] swsusp: Registered nosave memory region: 000000007eeea000 - 000000007eef2000 [ 0.000000] swsusp: Registered nosave memory region: 000000007eef3000 - 000000007eeff000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f000000:71000000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 511217 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=1df1d8ff-a060-48b0-9a84-48bbb42810cf ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 29.202174] time.c: Detected 1800.062 MHz processor. [ 29.203135] Console: colour VGA+ 80x25 [ 29.203138] console [tty0] enabled [ 29.203160] Checking aperture... [ 29.203169] Calgary: detecting Calgary via BIOS EBDA area [ 29.203173] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 29.220936] Memory: 2037096k/2079744k available (2468k kernel code, 41044k reserved, 1308k data, 316k init) [ 29.220969] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 [ 29.300012] Calibrating delay using timer specific routine.. 3602.87 BogoMIPS (lpj=7205749) [ 29.300043] Security Framework initialized [ 29.300050] SELinux: Disabled at boot. [ 29.300062] AppArmor: AppArmor initialized [ 29.300066] Failure registering capabilities with primary security module. [ 29.300300] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 29.301369] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 29.301860] Mount-cache hash table entries: 256 [ 29.302002] CPU: L1 I cache: 32K, L1 D cache: 32K [ 29.302005] CPU: L2 cache: 1024K [ 29.302008] CPU 0/0 -> Node 0 [ 29.302009] using mwait in idle threads. [ 29.302011] CPU: Physical Processor ID: 0 [ 29.302012] CPU: Processor Core ID: 0 [ 29.302019] CPU0: Thermal monitoring enabled (TM2) [ 29.302034] SMP alternatives: switching to UP code [ 29.302845] Early unpacking initramfs... done [ 29.686929] ACPI: Core revision 20070126 [ 29.686967] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 29.731741] Using local APIC timer interrupts. [ 29.787214] APIC timer calibration result 12500419 [ 29.787216] Detected 12.500 MHz APIC timer. [ 29.787295] SMP alternatives: switching to SMP code [ 29.788009] Booting processor 1/2 APIC 0x1 [ 29.798169] Initializing CPU#1 [ 29.879078] Calibrating delay using timer specific routine.. 3583.03 BogoMIPS (lpj=7166075) [ 29.879085] CPU: L1 I cache: 32K, L1 D cache: 32K [ 29.879086] CPU: L2 cache: 1024K [ 29.879089] CPU 1/1 -> Node 0 [ 29.879090] CPU: Physical Processor ID: 0 [ 29.879091] CPU: Processor Core ID: 1 [ 29.879098] CPU1: Thermal monitoring enabled (TM2) [ 29.879313] Genuine Intel(R) CPU 2160 @ 1.80GHz stepping 02 [ 29.879409] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 29.899403] Brought up 2 CPUs [ 29.899476] CPU0 attaching sched-domain: [ 29.899478] domain 0: span 03 [ 29.899480] groups: 01 02 [ 29.899482] domain 1: span 03 [ 29.899484] groups: 03 [ 29.899486] CPU1 attaching sched-domain: [ 29.899488] domain 0: span 03 [ 29.899489] groups: 02 01 [ 29.899491] domain 1: span 03 [ 29.899493] groups: 03 [ 29.899712] net_namespace: 120 bytes [ 29.900097] Time: 11:26:33 Date: 04/05/08 [ 29.900148] NET: Registered protocol family 16 [ 29.900345] ACPI: bus type pci registered [ 29.900420] PCI: Using configuration type 1 [ 29.902091] ACPI: EC: Look up EC in DSDT [ 29.904301] ACPI: Interpreter enabled [ 29.904305] ACPI: (supports S0 S1 S3 S4 S5) [ 29.904319] ACPI: Using IOAPIC for interrupt routing [ 29.908403] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 29.909324] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 29.909327] PCI quirk: region 0500-053f claimed by ICH6 GPIO [ 29.910163] PCI: Transparent bridge - 0000:00:1e.0 [ 29.910201] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 29.910605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 29.910880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 29.910995] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 29.911157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 29.911271] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 29.911388] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 29.916541] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 29.916643] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12) [ 29.916738] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) [ 29.916831] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 29.916924] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) [ 29.917017] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12) [ 29.917110] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12) [ 29.917202] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 29.917360] Linux Plug and Play Support v0.97 (c) Adam Belay [ 29.917393] pnp: PnP ACPI init [ 29.917400] ACPI: bus type pnp registered [ 29.919867] pnp: PnP ACPI: found 11 devices [ 29.919870] ACPI: ACPI bus type pnp unregistered [ 29.920112] PCI: Using ACPI for IRQ routing [ 29.920115] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 29.935099] NET: Registered protocol family 8 [ 29.935102] NET: Registered protocol family 20 [ 29.935155] PCI-GART: No AMD northbridge found. [ 29.935162] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 29.935168] hpet0: 4 64-bit timers, 14318180 Hz [ 29.936209] AppArmor: AppArmor Filesystem Enabled [ 29.939080] Time: tsc clocksource has been installed. [ 29.939089] Switched to high resolution mode on CPU 0 [ 29.939450] Switched to high resolution mode on CPU 1 [ 29.947128] system 00:01: iomem range 0xf0000000-0xf7ffffff could not be reserved [ 29.947133] system 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved [ 29.947137] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved [ 29.947141] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 29.947145] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 29.947149] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 29.947153] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 29.947157] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 29.947160] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved [ 29.947164] system 00:01: iomem range 0xc0000-0xdffff has been reserved [ 29.947168] system 00:01: iomem range 0xe0000-0xfffff could not be reserved [ 29.947172] system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved [ 29.947183] system 00:06: ioport range 0x500-0x53f has been reserved [ 29.947187] system 00:06: ioport range 0x400-0x47f has been reserved [ 29.947190] system 00:06: ioport range 0x680-0x6ff has been reserved [ 29.947653] PCI: Failed to allocate mem resource #6:20000@90000000 for 0000:01:00.0 [ 29.947656] PCI: Bridge: 0000:00:01.0 [ 29.947658] IO window: 2000-2fff [ 29.947661] MEM window: 90000000-91ffffff [ 29.947664] PREFETCH window: 80000000-8fffffff [ 29.947667] PCI: Bridge: 0000:00:1c.0 [ 29.947669] IO window: disabled. [ 29.947672] MEM window: disabled. [ 29.947675] PREFETCH window: disabled. [ 29.947680] PCI: Bridge: 0000:00:1c.1 [ 29.947682] IO window: 1000-1fff [ 29.947686] MEM window: 92100000-921fffff [ 29.947689] PREFETCH window: disabled. [ 29.947693] PCI: Bridge: 0000:00:1c.2 [ 29.947694] IO window: disabled. [ 29.947698] MEM window: disabled. [ 29.947701] PREFETCH window: disabled. [ 29.947705] PCI: Bridge: 0000:00:1c.3 [ 29.947706] IO window: disabled. [ 29.947710] MEM window: disabled. [ 29.947713] PREFETCH window: disabled. [ 29.947717] PCI: Bridge: 0000:00:1c.4 [ 29.947718] IO window: disabled. [ 29.947722] MEM window: disabled. [ 29.947725] PREFETCH window: disabled. [ 29.947729] PCI: Bridge: 0000:00:1e.0 [ 29.947730] IO window: disabled. [ 29.947734] MEM window: 92000000-920fffff [ 29.947737] PREFETCH window: disabled. [ 29.947755] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 29.947760] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 29.947776] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 29.947782] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 29.947798] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 20 (level, low) -> IRQ 20 [ 29.947802] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 29.947819] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 29.947824] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 29.947840] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 29.947845] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 29.947861] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 [ 29.947866] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 29.947875] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 29.947885] NET: Registered protocol family 2 [ 29.983166] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 29.983936] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 29.985877] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 29.986352] TCP: Hash tables configured (established 262144 bind 65536) [ 29.986355] TCP reno registered [ 29.995236] checking if image is initramfs... it is [ 30.747389] Freeing initrd memory: 7502k freed [ 30.751816] audit: initializing netlink socket (disabled) [ 30.751834] audit(1207394793.480:1): initialized [ 30.754028] VFS: Disk quotas dquot_6.5.1 [ 30.754101] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 30.754229] io scheduler noop registered [ 30.754231] io scheduler anticipatory registered [ 30.754233] io scheduler deadline registered [ 30.754338] io scheduler cfq registered (default) [ 30.755662] Boot video device is 0000:01:00.0 [ 30.755818] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 30.755850] assign_interrupt_mode Found MSI capability [ 30.755876] Allocate Port Service[0000:00:01.0:pcie00] [ 30.755952] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 30.755988] assign_interrupt_mode Found MSI capability [ 30.756018] Allocate Port Service[0000:00:1c.0:pcie00] [ 30.756052] Allocate Port Service[0000:00:1c.0:pcie02] [ 30.756129] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 30.756165] assign_interrupt_mode Found MSI capability [ 30.756195] Allocate Port Service[0000:00:1c.1:pcie00] [ 30.756229] Allocate Port Service[0000:00:1c.1:pcie02] [ 30.756304] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 30.756340] assign_interrupt_mode Found MSI capability [ 30.756370] Allocate Port Service[0000:00:1c.2:pcie00] [ 30.756404] Allocate Port Service[0000:00:1c.2:pcie02] [ 30.756479] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 30.756516] assign_interrupt_mode Found MSI capability [ 30.756545] Allocate Port Service[0000:00:1c.3:pcie00] [ 30.756578] Allocate Port Service[0000:00:1c.3:pcie02] [ 30.756655] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 30.756691] assign_interrupt_mode Found MSI capability [ 30.756721] Allocate Port Service[0000:00:1c.4:pcie00] [ 30.756753] Allocate Port Service[0000:00:1c.4:pcie02] [ 30.784669] Real Time Clock Driver v1.12ac [ 30.784789] hpet_resources: 0xfed00000 is busy [ 30.784805] Linux agpgart interface v0.102 [ 30.784807] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 30.784986] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 30.785979] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 30.786042] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 30.786184] PNP: No PS/2 controller found. Probing ports directly. [ 30.789082] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 30.789087] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 30.798023] mice: PS/2 mouse device common for all mice [ 30.798061] cpuidle: using governor ladder [ 30.798063] cpuidle: using governor menu [ 30.798205] NET: Registered protocol family 1 [ 30.798257] registered taskstats version 1 [ 30.798391] Magic number: 4:900:427 [ 30.798486] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 30.798489] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 30.798491] EDD information not available. [ 30.798498] Freeing unused kernel memory: 316k freed [ 31.988853] fuse init (API version 7.9) [ 32.006833] Monitor-Mwait will be used to enter C-1 state [ 32.006838] ACPI: Processor [CPU0] (supports 8 throttling states) [ 32.007002] ACPI: Processor [CPU1] (supports 8 throttling states) [ 32.007018] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 32.007029] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 32.183711] usbcore: registered new interface driver usbfs [ 32.183732] usbcore: registered new interface driver hub [ 32.186923] usbcore: registered new device driver usb [ 32.188532] USB Universal Host Controller Interface driver v3.0 [ 32.188602] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 32.188615] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 32.188618] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 32.188877] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 32.188910] uhci_hcd 0000:00:1a.0: irq 18, io base 0x000030c0 [ 32.189051] usb usb1: configuration #1 chosen from 1 choice [ 32.189074] hub 1-0:1.0: USB hub found [ 32.189080] hub 1-0:1.0: 2 ports detected [ 32.292899] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 32.292910] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 32.292913] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 32.292935] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 32.292961] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030a0 [ 32.293058] usb usb2: configuration #1 chosen from 1 choice [ 32.293081] hub 2-0:1.0: USB hub found [ 32.293085] hub 2-0:1.0: 2 ports detected [ 32.293325] SCSI subsystem initialized [ 32.321872] libata version 3.00 loaded. [ 32.395284] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 17 (level, low) -> IRQ 17 [ 32.395294] PCI: Setting latency timer of device 0000:00:1a.2 to 64 [ 32.395298] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 32.395320] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 32.395346] uhci_hcd 0000:00:1a.2: irq 17, io base 0x00003080 [ 32.395448] usb usb3: configuration #1 chosen from 1 choice [ 32.395470] hub 3-0:1.0: USB hub found [ 32.395475] hub 3-0:1.0: 2 ports detected [ 32.437323] FDC 0 is a National Semiconductor PC87306 [ 32.499120] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 32.499132] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 32.499136] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 32.499166] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 32.499193] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003060 [ 32.499316] usb usb4: configuration #1 chosen from 1 choice [ 32.499342] hub 4-0:1.0: USB hub found [ 32.499347] hub 4-0:1.0: 2 ports detected [ 32.532516] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 32.602948] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 32.602960] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 32.602964] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 32.602990] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 32.603018] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003040 [ 32.603125] usb usb5: configuration #1 chosen from 1 choice [ 32.603148] hub 5-0:1.0: USB hub found [ 32.603153] hub 5-0:1.0: 2 ports detected [ 32.706781] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 32.706793] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 32.706796] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 32.706821] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 32.706845] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003020 [ 32.706952] usb usb6: configuration #1 chosen from 1 choice [ 32.706977] hub 6-0:1.0: USB hub found [ 32.706982] hub 6-0:1.0: 2 ports detected [ 32.719227] usb 1-1: configuration #1 chosen from 1 choice [ 32.812250] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 17 (level, low) -> IRQ 17 [ 32.812517] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 32.812523] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 32.812569] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 [ 32.816471] ehci_hcd 0000:00:1a.7: debug port 1 [ 32.816478] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 32.816486] ehci_hcd 0000:00:1a.7: irq 17, io mem 0x92225400 [ 32.830493] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 32.830611] usb usb7: configuration #1 chosen from 1 choice [ 32.830635] hub 7-0:1.0: USB hub found [ 32.830642] hub 7-0:1.0: 6 ports detected [ 32.934496] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 21 (level, low) -> IRQ 21 [ 32.934550] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 32.934562] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 32.934585] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 21 (level, low) -> IRQ 21 [ 32.934602] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 32.934610] ACPI: PCI interrupt for device 0000:00:1f.5 disabled [ 32.934636] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 32.934656] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 32.934667] ACPI: PCI interrupt for device 0000:03:00.0 disabled [ 32.934705] ACPI: PCI Interrupt 0000:03:00.0[A] -> <6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 32.934710] GSI 17 (level, low) -> IRQ 17 [ 32.934883] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 32.934968] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 32.934973] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 32.935017] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 32.935617] scsi0 : pata_marvell [ 32.935993] scsi1 : pata_marvell [ 32.936024] ata1: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 17 [ 32.936026] ata2: DUMMY [ 32.936298] BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 [ 32.938935] ehci_hcd 0000:00:1d.7: debug port 1 [ 32.938942] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 32.938950] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x92225000 [ 32.946349] usb 1-1: USB disconnect, address 2 [ 32.954333] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 32.954489] usb usb8: configuration #1 chosen from 1 choice [ 32.954522] hub 8-0:1.0: USB hub found [ 32.954531] hub 8-0:1.0: 6 ports detected [ 33.102479] ACPI: PCI Interrupt 0000:07:03.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 33.152298] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[92004000-920047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 33.154809] ata_piix 0000:00:1f.2: version 2.12 [ 33.154816] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 33.154838] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 21 (level, low) -> IRQ 21 [ 33.154872] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 33.155753] scsi2 : ata_piix [ 33.155823] scsi3 : ata_piix [ 33.155921] ata3: SATA max UDMA/133 cmd 0x3458 ctl 0x346c bmdma 0x3430 irq 21 [ 33.155923] ata4: SATA max UDMA/133 cmd 0x3450 ctl 0x3468 bmdma 0x3438 irq 21 [ 33.362312] ata3.00: ATA-7: ST3400620AS, 3.AAK, max UDMA/133 [ 33.362317] ata3.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 33.428853] ata3.00: configured for UDMA/133 [ 33.901014] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB01, max UDMA/100 [ 34.072731] ata4.00: configured for UDMA/100 [ 34.072852] scsi 2:0:0:0: Direct-Access ATA ST3400620AS 3.AA PQ: 0 ANSI: 5 [ 34.073652] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB01 PQ: 0 ANSI: 5 [ 34.073736] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 34.073761] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 21 (level, low) -> IRQ 21 [ 34.073799] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 34.073871] scsi4 : ata_piix [ 34.073919] scsi5 : ata_piix [ 34.073987] ata5: SATA max UDMA/133 cmd 0x3448 ctl 0x3464 bmdma 0x3410 irq 21 [ 34.073990] ata6: SATA max UDMA/133 cmd 0x3440 ctl 0x3460 bmdma 0x3418 irq 21 [ 34.412654] Driver 'sd' needs updating - please use bus_type methods [ 34.412744] sd 2:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) [ 34.412756] sd 2:0:0:0: [sda] Write Protect is off [ 34.412758] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 34.412775] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 34.412828] sd 2:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) [ 34.412838] sd 2:0:0:0: [sda] Write Protect is off [ 34.412840] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 34.412856] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 34.412859] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 34.424641] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001e7a893] [ 34.433199] sda1 sda2 sda3 sda4 < sda5 sda6 sda7<6>usbcore: registered new interface driver hiddev [ 34.479816] sda8 > [ 34.480052] sd 2:0:0:0: [sda] Attached SCSI disk [ 34.484246] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 34.484283] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 34.486277] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 34.486282] Uniform CD-ROM driver Revision: 3.20 [ 34.486337] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 34.715604] usb 1-1: new low speed USB device using uhci_hcd and address 3 [ 34.751056] Attempting manual resume [ 34.751060] swsusp: Resume From Partition 8:8 [ 34.751061] PM: Checking swsusp image. [ 34.751252] PM: Resume from disk failed. [ 34.776988] kjournald starting. Commit interval 5 seconds [ 34.777003] EXT3-fs: mounted filesystem with ordered data mode. [ 34.899930] usb 1-1: configuration #1 chosen from 1 choice [ 35.138851] usb 1-2: new low speed USB device using uhci_hcd and address 4 [ 35.317294] usb 1-2: configuration #1 chosen from 1 choice [ 35.566743] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 35.728414] usb 4-1: configuration #1 chosen from 1 choice [ 35.970065] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 36.150748] usb 5-1: configuration #1 chosen from 1 choice [ 36.392896] usb 6-1: new low speed USB device using uhci_hcd and address 2 [ 36.577101] usb 6-1: configuration #1 chosen from 1 choice [ 36.593508] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input1 [ 36.612564] input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1a.0-1 [ 36.753213] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.1/input/input2 [ 36.776822] input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1a.0-1 [ 36.799706] input: DragonRise Inc. Generic USB Joystick as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/input/input3 [ 36.799730] input,hidraw2: USB HID v1.10 Joystick [DragonRise Inc. Generic USB Joystick ] on usb-0000:00:1d.1-1 [ 36.818669] input: Technology Innovation Engineering Co. Ltd. USB Game Controller as /devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.0/input/input4 [ 36.818693] input,hidraw3: USB HID v1.00 Gamepad [Technology Innovation Engineering Co. Ltd. USB Game Controller] on usb-0000:00:1d.2-1 [ 36.818712] usbcore: registered new interface driver usbhid [ 36.818716] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 40.067658] heci: Intel(R) AMT Management Interface - version 3.1.0.31 [ 40.067662] heci: Copyright (c) 2003 - 2007 Intel Corporation. [ 40.067704] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 40.067709] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 40.068084] heci: link layer has been established. [ 40.144126] iTCO_vendor_support: vendor-support=0 [ 40.171466] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 40.171559] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460) [ 40.171595] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 40.172408] heci: heci driver initialization successful. [ 40.198666] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 40.227382] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 40.251505] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 40.363160] e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0 [ 40.363164] e1000e: Copyright (c) 1999-2007 Intel Corporation. [ 40.363215] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 40.363226] PCI: Setting latency timer of device 0000:00:19.0 to 64 [ 40.438398] input: Power Button (FF) as /devices/virtual/input/input6 [ 40.461217] ACPI: Power Button (FF) [PWRF] [ 40.461321] input: Sleep Button (CM) as /devices/virtual/input/input7 [ 40.481141] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:19:d1:a2:fc:ed [ 40.481144] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 40.481167] 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff [ 40.490831] ACPI: Sleep Button (CM) [SLPB] [ 40.654657] Linux video capture interface: v2.00 [ 40.920944] saa7130/34: v4l2 driver version 0.2.14 loaded [ 40.921011] ACPI: PCI Interrupt 0000:07:02.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 40.921019] saa7130[0]: found at 0000:07:02.0, rev: 1, irq: 18, latency: 32, mmio: 0x92004800 [ 40.921026] saa7130[0]: subsystem: 5168:0138, board: LifeView/Typhoon FlyVIDEO2000 [card=3,autodetected] [ 40.921037] saa7130[0]: board init: gpio is 38500 [ 40.921040] saa7130[0]: there are different flyvideo cards with different tuners [ 40.921041] saa7130[0]: out there, you might have to use the tuner= insmod [ 40.921042] saa7130[0]: option to override the default value. [ 40.921102] input: saa7134 IR (LifeView/Typhoon Fl as /devices/pci0000:00/0000:00:1e.0/0000:07:02.0/input/input8 [ 40.984425] nvidia: module license 'NVIDIA' taints kernel. [ 41.301048] saa7130[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff [ 41.301057] saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 41.301064] saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 41.301070] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 41.301077] saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 41.301083] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 41.301090] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 41.301097] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 41.504717] tuner 0-0061: chip found @ 0xc2 (saa7130[0]) [ 41.504745] tuner-simple 0-0061: type set to 37 (LG PAL (newer TAPC series)) [ 41.504748] tuner 0-0061: type set to LG PAL (newer TAPC [ 41.504751] tuner-simple 0-0061: type set to 37 (LG PAL (newer TAPC series)) [ 41.504753] tuner 0-0061: type set to LG PAL (newer TAPC [ 41.539018] saa7130[0]: registered device video0 [v4l2] [ 41.539039] saa7130[0]: registered device vbi0 [ 41.539057] saa7130[0]: registered device radio0 [ 41.544853] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 41.544862] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 41.544963] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008 [ 41.554732] saa7134 ALSA driver for DMA sound loaded [ 41.554763] saa7130[0]/alsa: saa7130[0] at 0x92004800 irq 18 registered as card -2 [ 41.554830] Unable to handle kernel NULL pointer dereference at 0000000000000001 RIP: [ 41.554834] [] :snd_pcm:snd_pcm_timer_init+0x2f/0x1a0 [ 41.554847] PGD 7dea3067 PUD 7d91f067 PMD 0 [ 41.554851] Oops: 0000 [1] SMP [ 41.554854] CPU 0 [ 41.554856] Modules linked in: saa7134_alsa snd_pcm snd_page_alloc snd_hwdep tuner tea5767 tda8290 tuner_simple mt20xx tea5761 snd_seq_dummy snd_seq_oss nvidia(P) snd_seq_midi snd_rawmidi saa7134 snd_seq_midi_event compat_ioctl32 videobuf_dma_sg videobuf_core ir_kbd_i2c i2c_core serio_raw snd_seq ir_common snd_timer psmouse videodev v4l2_common v4l1_compat snd_seq_device snd button soundcore e1000e intel_agp pcspkr shpchp pci_hotplug iTCO_wdt iTCO_vendor_support heci ext3 jbd mbcache sg sr_mod cdrom sd_mod ata_piix ata_generic usbhid hid floppy ohci1394 pata_acpi ieee1394 pata_marvell libata scsi_mod ehci_hcd uhci_hcd usbcore thermal processor fan fbcon tileblit font bitblit softcursor fuse [ 41.554905] Pid: 3252, comm: modprobe Tainted: P 2.6.24-15-generic #1 [ 41.554907] RIP: 0010:[] [] :snd_pcm:snd_pcm_timer_init+0x2f/0x1a0 [ 41.554916] RSP: 0000:ffff81007e37fcd8 EFLAGS: 00010246 [ 41.554918] RAX: 0000000000000001 RBX: ffff81007eb5b658 RCX: ffff81007e37fcf0 [ 41.554920] RDX: 0000000000000000 RSI: ffffffff88b73648 RDI: ffff81007eb5b400 [ 41.554922] RBP: ffff81007ce41600 R08: 0000000000000000 R09: ffff810037996288 [ 41.554924] R10: 0000000000000000 R11: ffffffff803b6d90 R12: 0000000000000018 [ 41.554926] R13: ffff81007ce41658 R14: 0000000000000001 R15: ffffffff88b72e48 [ 41.554928] FS: 00007f94bf8656e0(0000) GS:ffffffff805b1000(0000) knlGS:0000000000000000 [ 41.554931] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 41.554933] CR2: 0000000000000001 CR3: 0000000037e5d000 CR4: 00000000000006e0 [ 41.554935] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 41.554937] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 41.554939] Process modprobe (pid: 3252, threadinfo ffff81007e37e000, task ffff81003780d740) [ 41.554941] Stack: 0000000000000003 0000000000000000 ffff81007ce41600 0000000000000018 [ 41.554946] ffff81007eb5b658 ffffffff88b687dd ffff81007eb5bc00 0000000480347cc2 [ 41.554950] 63304431436d6370 ffff81007cc14100 ffff81007eb5b444 ffff8100747f56c0 [ 41.554954] Call Trace: [ 41.554965] [] :snd_pcm:snd_pcm_dev_register+0xfd/0x220 [ 41.554981] [] :snd:snd_device_register_all+0x2f/0x60 [ 41.554990] [] :snd:snd_card_register+0x3b/0x390 [ 41.554998] [] :snd_pcm:snd_pcm_new+0xe3/0x140 [ 41.555005] [] :saa7134_alsa:alsa_device_init+0x287/0x2d0 [ 41.555013] [] :saa7134_alsa:saa7134_alsa_init+0x75/0xc0 [ 41.555019] [] sys_init_module+0x18e/0x1a90 [ 41.555039] [] :snd_pcm:snd_pcm_format_width+0x0/0x30 [ 41.555048] [] system_call+0x7e/0x83 [ 41.555056] [ 41.555057] [ 41.555057] Code: 8b 00 89 44 24 08 8b 47 18 89 44 24 0c 8b 43 18 01 c0 09 c2 [ 41.555067] RIP [] :snd_pcm:snd_pcm_timer_init+0x2f/0x1a0 [ 41.555075] RSP [ 41.555077] CR2: 0000000000000001 [ 41.555079] ---[ end trace 1ef79b9b2534db01 ]--- [ 41.637859] usbcore: registered new interface driver usbserial [ 41.637876] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic [ 41.637911] usbcore: registered new interface driver usbserial_generic [ 41.637913] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial Driver core [ 41.658532] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303 [ 41.658565] pl2303 4-1:1.0: pl2303 converter detected [ 41.658659] usb 4-1: pl2303 converter now attached to ttyUSB0 [ 41.658669] usbcore: registered new interface driver pl2303 [ 41.658672] /build/buildd/linux-2.6.24/drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver [ 41.696992] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for DeLorme Earthmate USB [ 41.697013] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for HID->COM RS232 Adapter [ 41.697028] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for Nokia CA-42 V2 Adapter [ 41.697062] cypress 1-2:1.0: HID->COM RS232 Adapter converter detected [ 41.700024] usb 1-2: HID->COM RS232 Adapter converter now attached to ttyUSB1 [ 41.700044] usbcore: registered new interface driver cypress [ 41.700047] /build/buildd/linux-2.6.24/drivers/usb/serial/cypress_m8.c: Cypress USB to Serial Driver v1.09 [ 219.998708] loop: module loaded [ 220.042030] lp: driver loaded but no devices found [ 220.207811] Adding 6305472k swap on /dev/sda8. Priority:-1 extents:1 across:6305472k [ 220.798449] EXT3 FS on sda6, internal journal [ 221.525680] kjournald starting. Commit interval 5 seconds [ 221.526102] EXT3 FS on sda5, internal journal [ 221.526108] EXT3-fs: mounted filesystem with ordered data mode. [ 221.556380] kjournald starting. Commit interval 5 seconds [ 221.556715] EXT3 FS on sda7, internal journal [ 221.556719] EXT3-fs: mounted filesystem with ordered data mode. [ 221.858316] ip_tables: (C) 2000-2006 Netfilter Core Team [ 222.176921] No dock devices found. [ 223.686797] ppdev: user-space parallel port driver [ 224.573328] Unable to handle kernel NULL pointer dereference at 0000000000000001 RIP: [ 224.573334] [] :snd_pcm:snd_pcm_info+0x44/0x110 [ 224.573347] PGD 7403e067 PUD 7403f067 PMD 0 [ 224.573350] Oops: 0000 [2] SMP [ 224.573353] CPU 1 [ 224.573355] Modules linked in: ppdev acpi_cpufreq cpufreq_stats cpufreq_powersave cpufreq_userspace cpufreq_ondemand freq_table cpufreq_conservative video output sbs sbshc container dock battery iptable_filter ip_tables x_tables ac sbp2 parport_pc lp parport loop joydev cypress_m8 evdev pl2303 usbserial snd_pcm_oss snd_mixer_oss saa7134_alsa snd_pcm snd_page_alloc snd_hwdep tuner tea5767 tda8290 tuner_simple mt20xx tea5761 snd_seq_dummy snd_seq_oss nvidia(P) snd_seq_midi snd_rawmidi saa7134 snd_seq_midi_event compat_ioctl32 videobuf_dma_sg videobuf_core ir_kbd_i2c i2c_core serio_raw snd_seq ir_common snd_timer psmouse videodev v4l2_common v4l1_compat snd_seq_device snd button soundcore e1000e intel_agp pcspkr shpchp pci_hotplug iTCO_wdt iTCO_vendor_support heci ext3 jbd mbcache sg sr_mod cdrom sd_mod ata_piix ata_generic usbhid hid floppy ohci1394 pata_acpi ieee1394 pata_marvell libata scsi_mod ehci_hcd uhci_hcd usbcore thermal processor fan fbcon tileblit font bitblit softcursor fuse [ 224.573422] Pid: 5274, comm: hald Tainted: P D 2.6.24-15-generic #1 [ 224.573425] RIP: 0010:[] [] :snd_pcm:snd_pcm_info+0x44/0x110 [ 224.573434] RSP: 0018:ffff81007df71da8 EFLAGS: 00010206 [ 224.573436] RAX: 0000000000000001 RBX: ffff81007eb5b400 RCX: 0000000000000000 [ 224.573439] RDX: 0000000000000040 RSI: ffff81007eb5b424 RDI: ffff81007d918410 [ 224.573442] RBP: ffff81007d918400 R08: 0000000000000000 R09: ffff81007d918400 [ 224.573445] R10: 0000000000000000 R11: ffffffff803112b0 R12: 0000000000000001 [ 224.573447] R13: ffff81007eb5b658 R14: ffff81007d3e53c0 R15: ffffffff805c28a8 [ 224.573451] FS: 00007f2124dab780(0000) GS:ffff81007e801700(0000) knlGS:0000000000000000 [ 224.573454] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 224.573456] CR2: 0000000000000001 CR3: 000000007402b000 CR4: 00000000000006e0 [ 224.573459] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 224.573462] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 224.573464] Process hald (pid: 5274, threadinfo ffff81007df70000, task ffff81007cf067c0) [ 224.573466] Stack: ffff810074a41020 ffff81007d918400 ffff810037f377c0 ffff81007eb5b658 [ 224.573471] ffff810037f377a0 ffffffff88b683eb ffff81007eb41360 ffff81007eb41300 [ 224.573475] 0000000000000000 ffffffff882058c7 ffffffff01000000 ffff81007eb41b40 [ 224.573478] Call Trace: [ 224.573489] [] :snd_pcm:snd_pcm_proc_info_read+0x3b/0x170 [ 224.573502] [] :snd:snd_info_entry_open+0x147/0x2e0 [ 224.573510] [] proc_reg_open+0x0/0xa0 [ 224.573513] [] proc_reg_open+0x5e/0xa0 [ 224.573520] [] __dentry_open+0xdb/0x200 [ 224.573526] [] do_filp_open+0x3a/0x50 [ 224.573536] [] get_unused_fd_flags+0x77/0x120 [ 224.573543] [] do_sys_open+0x5a/0xf0 [ 224.573549] [] system_call+0x7e/0x83 [ 224.573559] [ 224.573560] [ 224.573560] Code: 8b 00 89 45 0c 8b 43 18 89 45 00 41 8b 45 3c 89 45 08 41 8b [ 224.573570] RIP [] :snd_pcm:snd_pcm_info+0x44/0x110 [ 224.573578] RSP [ 224.573580] CR2: 0000000000000001 [ 224.573586] ---[ end trace 1ef79b9b2534db01 ]--- [ 224.647183] Bluetooth: Core ver 2.11 [ 224.647597] NET: Registered protocol family 31 [ 224.647601] Bluetooth: HCI device and connection manager initialized [ 224.647605] Bluetooth: HCI socket layer initialized [ 224.657953] Bluetooth: L2CAP ver 2.9 [ 224.657959] Bluetooth: L2CAP socket layer initialized [ 224.732482] Bluetooth: RFCOMM socket layer initialized [ 224.732504] Bluetooth: RFCOMM TTY layer initialized [ 224.732507] Bluetooth: RFCOMM ver 1.8 [ 291.588833] NET: Registered protocol family 10 [ 291.589154] lo: Disabled Privacy Extensions [ 319.779945] gnome-keyring-d[5600]: segfault at 31 rip 31 rsp 7fffe613a898 error 14