[ 0.000000] Linux version 2.6.24-15-generic (buildd@rothera) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Apr 4 03:48:31 UTC 2008 (Ubuntu 2.6.24-15.26-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262128 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262128 [ 0.000000] On node 0 totalpages: 262128 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32497 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F64A0 checksum 0 [ 0.000000] ACPI: RSDP 000F64A0, 0014 (r0 VIA694) [ 0.000000] ACPI: RSDT 3FFF3000, 0028 (r1 VIA694 AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 VIA694 AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3FFF30C0, 2B1B (r1 VIA694 AWRDACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 3FFF0000, 0040 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfff0000) [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260081 [ 0.000000] Kernel command line: root=UUID=3b565974-2cb8-43d3-a260-0c5b9a47bee0 ro quiet splash [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffb000 (0180f000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 900.049 MHz processor. [ 24.450750] Console: colour VGA+ 80x25 [ 24.450758] console [tty0] enabled [ 24.452066] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 24.454315] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 24.533006] Memory: 1027376k/1048512k available (2164k kernel code, 20400k reserved, 1006k data, 364k init, 131008k highmem) [ 24.533027] virtual kernel memory layout: [ 24.533030] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 24.533033] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 24.533036] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 24.533039] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 24.533042] .init : 0xc041f000 - 0xc047a000 ( 364 kB) [ 24.533045] .data : 0xc031d2ad - 0xc0418dc4 (1006 kB) [ 24.533048] .text : 0xc0100000 - 0xc031d2ad (2164 kB) [ 24.533057] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 24.533165] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 24.613153] Calibrating delay using timer specific routine.. 1802.09 BogoMIPS (lpj=3604194) [ 24.613228] Security Framework initialized [ 24.613245] SELinux: Disabled at boot. [ 24.613296] AppArmor: AppArmor initialized [ 24.613308] Failure registering capabilities with primary security module. [ 24.613330] Mount-cache hash table entries: 512 [ 24.613645] CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 24.613670] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 24.613678] CPU: L2 Cache: 256K (64 bytes/line) [ 24.613685] CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000420 00000000 00000000 00000000 00000000 [ 24.613716] Compat vDSO mapped to ffffe000. [ 24.613747] Checking 'hlt' instruction... OK. [ 24.629238] SMP alternatives: switching to UP code [ 24.631605] Freeing SMP alternatives: 11k freed [ 24.631881] Early unpacking initramfs... done [ 25.361606] ACPI: Core revision 20070126 [ 25.361771] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 25.364369] ACPI: setting ELCR to 0200 (from 1e20) [ 25.367121] CPU0: AMD Athlon(tm) processor stepping 02 [ 25.367133] SMP motherboard not detected. [ 25.367139] Local APIC not detected. Using dummy APIC emulation. [ 25.367245] Brought up 1 CPUs [ 25.367297] CPU0 attaching sched-domain: [ 25.367304] domain 0: span 01 [ 25.367308] groups: 01 [ 25.367731] net_namespace: 64 bytes [ 25.367745] Booting paravirtualized kernel on bare hardware [ 25.368796] Time: 18:07:54 Date: 04/05/08 [ 25.368924] NET: Registered protocol family 16 [ 25.369411] EISA bus registered [ 25.369434] ACPI: bus type pci registered [ 25.446660] PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2 [ 25.446666] PCI: Using configuration type 1 [ 25.446670] Setting up standard PCI resources [ 25.464348] ACPI: EC: Look up EC in DSDT [ 25.469577] ACPI: Interpreter enabled [ 25.469584] ACPI: (supports S0 S1 S5) [ 25.469611] ACPI: Using PIC for interrupt routing [ 25.475780] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 25.477509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 25.514595] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 25.514866] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) [ 25.515137] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) [ 25.515405] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) [ 25.515647] Linux Plug and Play Support v0.97 (c) Adam Belay [ 25.515727] pnp: PnP ACPI init [ 25.515748] ACPI: bus type pnp registered [ 25.519511] pnp: PnP ACPI: found 9 devices [ 25.519517] ACPI: ACPI bus type pnp unregistered [ 25.519525] PnPBIOS: Disabled by ACPI PNP [ 25.520083] PCI: Using ACPI for IRQ routing [ 25.520091] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 25.604587] NET: Registered protocol family 8 [ 25.604592] NET: Registered protocol family 20 [ 25.604767] AppArmor: AppArmor Filesystem Enabled [ 25.608565] Time: tsc clocksource has been installed. [ 25.616646] system 00:00: iomem range 0xd0000-0xd3fff has been reserved [ 25.616653] system 00:00: iomem range 0xdc800-0xdffff has been reserved [ 25.616660] system 00:00: iomem range 0xf0000-0xfbfff could not be reserved [ 25.616666] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 25.616673] system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 25.616680] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved [ 25.616687] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 25.616693] system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved [ 25.616700] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 25.616707] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved [ 25.616723] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 25.616729] system 00:02: ioport range 0x294-0x297 has been reserved [ 25.647697] PCI: Bridge: 0000:00:01.0 [ 25.647703] IO window: a000-afff [ 25.647712] MEM window: e4000000-e5ffffff [ 25.647718] PREFETCH window: c0000000-dfffffff [ 25.647728] PCI: Bridge: 0000:00:09.0 [ 25.647733] IO window: b000-bfff [ 25.647740] MEM window: e6000000-e6ffffff [ 25.647746] PREFETCH window: 50000000-500fffff [ 25.647773] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 25.647811] NET: Registered protocol family 2 [ 25.684716] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 25.685472] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 25.690089] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 25.692407] TCP: Hash tables configured (established 131072 bind 65536) [ 25.692416] TCP reno registered [ 25.700864] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 [ 26.338823] it is [ 27.088726] Freeing initrd memory: 7274k freed [ 27.090088] audit: initializing netlink socket (disabled) [ 27.090117] audit(1207418875.560:1): initialized [ 27.090469] highmem bounce pool size: 64 pages [ 27.094745] VFS: Disk quotas dquot_6.5.1 [ 27.094918] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 27.095220] io scheduler noop registered [ 27.095226] io scheduler anticipatory registered [ 27.095231] io scheduler deadline registered [ 27.095254] io scheduler cfq registered (default) [ 27.095281] PCI: VIA PCI bridge detected. Disabling DAC. [ 27.095340] Boot video device is 0000:01:00.0 [ 27.096051] isapnp: Scanning for PnP cards... [ 27.449811] isapnp: No Plug & Play device found [ 27.514007] Real Time Clock Driver v1.12ac [ 27.514204] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 27.516731] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 27.516889] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 27.517219] PNP: No PS/2 controller found. Probing ports directly. [ 27.767152] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 27.779205] mice: PS/2 mouse device common for all mice [ 27.779479] EISA: Probing bus 0 at eisa.0 [ 27.779508] Cannot allocate resource for EISA slot 4 [ 27.779532] EISA: Detected 0 cards. [ 27.779540] cpuidle: using governor ladder [ 27.779545] cpuidle: using governor menu [ 27.779859] NET: Registered protocol family 1 [ 27.779924] Using IPI No-Shortcut mode [ 27.779995] registered taskstats version 1 [ 27.780273] Magic number: 4:336:139 [ 27.780610] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 27.780615] EDD information not available. [ 27.781463] Freeing unused kernel memory: 364k freed [ 29.311020] fuse init (API version 7.9) [ 29.350215] ACPI: Fan [FAN] (on) [ 29.365177] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 29.365192] ACPI: Processor [CPU0] (supports 2 throttling states) [ 29.368742] ACPI: Thermal Zone [THRM] (59 C) [ 30.267678] sundance.c:v1.2 11-Sep-2006 Written by Donald Becker [ 30.268532] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 30.268539] PCI: setting IRQ 11 as level-triggered [ 30.268548] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 30.269184] eth0: D-Link DFE-580TX 4 port Server Adapter at 0001b000, 00:05:5d:e6:11:f1, IRQ 11. [ 30.269827] eth0: MII PHY found at address 1, status 0x782d advertising 01e1. [ 30.279504] eth0: MII PHY found at address 0, status 0x782d advertising 01e1. [ 31.249213] SCSI subsystem initialized [ 31.424745] usbcore: registered new interface driver usbfs [ 31.424797] usbcore: registered new interface driver hub [ 31.435391] libata version 3.00 loaded. [ 31.446564] usbcore: registered new device driver usb [ 31.475954] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 31.475972] PCI: VIA VLink IRQ fixup for 0000:00:11.1, from 255 to 11 [ 31.476114] ACPI: PCI interrupt for device 0000:00:11.1 disabled [ 31.500701] pata_via 0000:00:11.1: version 0.3.3 [ 31.500753] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 31.500768] PCI: VIA VLink IRQ fixup for 0000:00:11.1, from 255 to 11 [ 31.509418] scsi0 : pata_via [ 31.542306] scsi1 : pata_via [ 31.542431] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xdc00 irq 14 [ 31.542439] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xdc08 irq 15 [ 31.552542] USB Universal Host Controller Interface driver v3.0 [ 31.573586] Floppy drive(s): fd0 is 1.44M [ 31.596300] FDC 0 is a post-1991 82077 [ 31.685208] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 31.685220] PCI: setting IRQ 10 as level-triggered [ 31.685228] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 31.685914] eth1: D-Link DFE-580TX 4 port Server Adapter at 0001b400, 00:05:5d:e6:11:f2, IRQ 10. [ 31.686527] eth1: MII PHY found at address 1, status 0x782d advertising 01e1. [ 31.696226] eth1: MII PHY found at address 0, status 0x782d advertising 01e1. [ 32.005526] ata1.00: ATA-5: WDC WD400BB-00AUA1, 18.20D18, max UDMA/100 [ 32.005538] ata1.00: 78165360 sectors, multi 16: LBA [ 32.005566] ata1.00: limited to UDMA/33 due to 40-wire cable [ 32.021422] ata1.00: configured for UDMA/33 [ 32.120161] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 [ 32.120173] PCI: setting IRQ 5 as level-triggered [ 32.120182] ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 32.120908] eth2: D-Link DFE-580TX 4 port Server Adapter at 0001b800, 00:05:5d:e6:11:f3, IRQ 5. [ 32.121520] eth2: MII PHY found at address 1, status 0x7809 advertising 01e1. [ 32.131203] eth2: MII PHY found at address 0, status 0x7809 advertising 01e1. [ 32.553444] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12 [ 32.553456] PCI: setting IRQ 12 as level-triggered [ 32.553465] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 [ 32.554216] eth3: D-Link DFE-580TX 4 port Server Adapter at 0001bc00, 00:05:5d:e6:11:f4, IRQ 12. [ 32.554829] eth3: MII PHY found at address 1, status 0x7809 advertising 01e1. [ 32.564584] eth3: MII PHY found at address 0, status 0x7809 advertising 01e1. [ 32.866393] ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1) [ 32.866402] ata2: failed to recover some devices, retrying in 5 secs [ 38.176183] ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1) [ 38.176195] ata2: failed to recover some devices, retrying in 5 secs [ 43.488538] ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1) [ 43.488550] ata2: failed to recover some devices, retrying in 5 secs [ 48.809043] ata2.00: ATAPI: YAMAHA CRW2100E, 1.0G, max UDMA/25 [ 48.980795] ata2.00: configured for UDMA/25 [ 48.981081] scsi 0:0:0:0: Direct-Access ATA WDC WD400BB-00AU 18.2 PQ: 0 ANSI: 5 [ 48.982487] scsi 1:0:0:0: CD-ROM YAMAHA CRW2100E 1.0G PQ: 0 ANSI: 2 [ 48.982900] sata_sil 0000:00:0e.0: version 2.3 [ 48.983013] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 48.985238] scsi2 : sata_sil [ 48.986318] scsi3 : sata_sil [ 48.986427] ata3: SATA max UDMA/100 mmio m512@0xec001000 tf 0xec001080 irq 10 [ 48.986436] ata4: SATA max UDMA/100 mmio m512@0xec001000 tf 0xec0010c0 irq 10 [ 49.007793] Driver 'sd' needs updating - please use bus_type methods [ 49.007994] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) [ 49.008025] sd 0:0:0:0: [sda] Write Protect is off [ 49.008032] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 49.008072] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 49.008176] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) [ 49.008200] sd 0:0:0:0: [sda] Write Protect is off [ 49.008205] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 49.008241] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 49.008250] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 49.036131] sda1 sda2 < sda5 > [ 49.055708] sd 0:0:0:0: [sda] Attached SCSI disk [ 49.068547] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 49.068560] Uniform CD-ROM driver Revision: 3.20 [ 49.068680] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 49.070399] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 49.070451] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 49.296317] ata3: SATA link down (SStatus 0 SControl 310) [ 49.764010] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 49.780587] ata4.00: ATA-6: HDS722516VLSA80, V34OA60A, max UDMA/100 [ 49.780596] ata4.00: 321672960 sectors, multi 16: LBA48 [ 49.804604] ata4.00: configured for UDMA/100 [ 49.804917] scsi 3:0:0:0: Direct-Access ATA HDS722516VLSA80 V34O PQ: 0 ANSI: 5 [ 49.805810] sd 3:0:0:0: [sdb] 321672960 512-byte hardware sectors (164697 MB) [ 49.805841] sd 3:0:0:0: [sdb] Write Protect is off [ 49.805847] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 49.805887] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 49.805993] sd 3:0:0:0: [sdb] 321672960 512-byte hardware sectors (164697 MB) [ 49.806017] sd 3:0:0:0: [sdb] Write Protect is off [ 49.806022] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 49.806060] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 49.806069] sdb: sdb2 < sdb5 sdb6 > [ 49.851856] sd 3:0:0:0: [sdb] Attached SCSI disk [ 49.851964] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 49.852304] ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 [ 49.852332] uhci_hcd 0000:00:11.2: UHCI Host Controller [ 49.852834] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1 [ 49.852913] uhci_hcd 0000:00:11.2: irq 12, io base 0x0000e000 [ 49.853228] usb usb1: configuration #1 chosen from 1 choice [ 49.853290] hub 1-0:1.0: USB hub found [ 49.853304] hub 1-0:1.0: 2 ports detected [ 49.956133] ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 [ 49.956164] uhci_hcd 0000:00:11.3: UHCI Host Controller [ 49.956217] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2 [ 49.956252] uhci_hcd 0000:00:11.3: irq 12, io base 0x0000e400 [ 49.956506] usb usb2: configuration #1 chosen from 1 choice [ 49.956559] hub 2-0:1.0: USB hub found [ 49.956574] hub 2-0:1.0: 2 ports detected [ 50.031268] Attempting manual resume [ 50.031277] swsusp: Resume From Partition 8:21 [ 50.031281] PM: Checking swsusp image. [ 50.031563] PM: Resume from disk failed. [ 50.066569] EXT3-fs: INFO: recovery required on readonly filesystem. [ 50.066579] EXT3-fs: write access will be enabled during recovery. [ 64.672586] kjournald starting. Commit interval 5 seconds [ 64.672635] EXT3-fs: sda1: orphan cleanup on readonly fs [ 64.672652] ext3_orphan_cleanup: deleting unreferenced inode 1196070 [ 64.689314] ext3_orphan_cleanup: deleting unreferenced inode 1196067 [ 64.689341] ext3_orphan_cleanup: deleting unreferenced inode 1196065 [ 64.689365] ext3_orphan_cleanup: deleting unreferenced inode 1196063 [ 64.689387] ext3_orphan_cleanup: deleting unreferenced inode 1196062 [ 64.696999] ext3_orphan_cleanup: deleting unreferenced inode 1196060 [ 64.725908] ext3_orphan_cleanup: deleting unreferenced inode 1196059 [ 64.725930] ext3_orphan_cleanup: deleting unreferenced inode 1196056 [ 64.810920] ext3_orphan_cleanup: deleting unreferenced inode 1049526 [ 64.810967] ext3_orphan_cleanup: deleting unreferenced inode 1200619 [ 64.997668] EXT3-fs: sda1: 10 orphan inodes deleted [ 64.997673] EXT3-fs: recovery complete. [ 65.006009] EXT3-fs: mounted filesystem with ordered data mode. [ 76.749808] Linux agpgart interface v0.102 [ 76.821756] agpgart: Detected VIA KT266/KY266x/KT333 chipset [ 76.849429] agpgart: AGP aperture is 64M @ 0xe0000000 [ 76.986041] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded [ 77.249196] HiSax: Linux Driver for passive ISDN cards [ 77.249207] HiSax: Version 3.5 (module) [ 77.249213] HiSax: Layer1 Revision 2.46.2.5 [ 77.249218] HiSax: Layer2 Revision 2.30.2.4 [ 77.249222] HiSax: TeiMgr Revision 2.20.2.3 [ 77.249226] HiSax: Layer3 Revision 2.22.2.3 [ 77.249230] HiSax: LinkLayer Revision 2.59.2.4 [ 77.321220] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 77.401222] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 78.192554] irda_init() [ 78.192604] NET: Registered protocol family 23 [ 78.360410] Linux video capture interface: v2.00 [ 78.924263] input: Power Button (FF) as /devices/virtual/input/input1 [ 78.935986] ACPI: Power Button (FF) [PWRF] [ 78.936181] input: Power Button (CM) as /devices/virtual/input/input2 [ 78.951936] ACPI: Power Button (CM) [PWRB] [ 78.952082] input: Sleep Button (CM) as /devices/virtual/input/input3 [ 78.963956] ACPI: Sleep Button (CM) [SLPB] [ 78.991985] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 78.992248] cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected] [ 78.992256] cx88[0]: TV tuner type 4, Radio tuner type -1 [ 79.063945] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 79.142486] tveeprom 0-0050: Hauppauge model 92001, rev B1B1, serial# 205524 [ 79.142498] tveeprom 0-0050: MAC address is 00-0D-FE-03-22-D4 [ 79.142505] tveeprom 0-0050: tuner model is Conexant_CX24109 (idx 111, type 4) [ 79.142512] tveeprom 0-0050: TV standards ATSC/DVB Digital (eeprom 0x80) [ 79.142518] tveeprom 0-0050: audio processor is CX883 (idx 32) [ 79.142524] tveeprom 0-0050: decoder processor is CX883 (idx 22) [ 79.142530] tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter [ 79.142536] cx88[0]: hauppauge eeprom: model=92001 [ 79.142770] input: cx88 IR (Hauppauge Nova-S-Plus as /devices/pci0000:00/0000:00:0c.2/input/input4 [ 79.151809] cx88[0]/2: cx2388x 8802 Driver Manager [ 79.151853] ACPI: PCI Interrupt 0000:00:0c.2[A] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 [ 79.151872] cx88[0]/2: found at 0000:00:0c.2, rev: 5, irq: 12, latency: 32, mmio: 0xe9000000 [ 79.151978] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 [ 79.151997] cx88[0]/0: found at 0000:00:0c.0, rev: 5, irq: 12, latency: 32, mmio: 0xe7000000 [ 79.152105] cx88[0]/0: registered device video0 [v4l2] [ 79.152145] cx88[0]/0: registered device vbi0 [ 80.163191] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 80.163203] cx88/2: registering cx8802 driver, type: dvb access: shared [ 80.163212] cx88[0]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37] [ 80.163219] cx88[0]/2: cx2388x based DVB/ATSC card [ 80.536677] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 81.317097] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 81.631016] eth0: Link changed: 100Mbps, full duplex [ 81.756753] eth1: Link changed: 100Mbps, full duplex [ 82.115881] [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes. [ 82.115959] [fglrx] ASYNCIO init succeed! [ 82.116170] [fglrx] PAT is enabled successfully! [ 82.117631] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0 [ 82.308749] DVB: registering new adapter (cx88[0]) [ 82.308765] DVB: registering frontend 0 (Conexant CX24123/CX24109)... [ 84.500664] NET: Registered protocol family 10 [ 84.501231] lo: Disabled Privacy Extensions [ 84.626721] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 84.626890] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 84.869996] cx2388x alsa driver version 0.0.6 loaded [ 85.142629] ACPI: PCI Interrupt 0000:00:0c.1[A] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 [ 85.142686] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 88.883694] loop: module loaded [ 88.947001] lp: driver loaded but no devices found [ 89.456131] Adding 1502036k swap on /dev/sda5. Priority:-1 extents:1 across:1502036k [ 89.830409] EXT3 FS on sda1, internal journal [ 90.224651] kjournald starting. Commit interval 5 seconds [ 90.228432] EXT3 FS on sdb5, internal journal [ 90.228444] EXT3-fs: mounted filesystem with ordered data mode. [ 90.777260] ip_tables: (C) 2000-2006 Netfilter Core Team [ 91.528097] No dock devices found. [ 92.140744] powernow: No powernow capabilities detected [ 94.896991] eth1: no IPv6 routers present [ 95.356687] eth0: no IPv6 routers present [ 99.362189] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000008 [ 99.362313] printing eip: f9cbecd2 *pde = 00000000 [ 99.362440] Oops: 0000 [#1] SMP [ 99.362559] Modules linked in: cpufreq_conservative cpufreq_stats cpufreq_ondemand cpufreq_powersave cpufreq_userspace freq_table container sbs sbshc video output dock battery iptable_filter ip_tables x_tables ac parport_pc lp parport loop cx88_alsa snd_seq_dummy evdev snd_via82xx ipv6 gameport snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_seq_oss snd_pcm snd_mpu401_uart snd_seq_midi isl6421 snd_rawmidi fglrx(P) cx24123 snd_seq_midi_event snd_seq pcspkr cx88_dvb cx88_vp3054_i2c videobuf_dvb snd_timer snd_seq_device dvb_core snd i2c_viapro cx8800 cx8802 button soundcore snd_page_alloc cx88xx ir_common i2c_algo_bit tveeprom i2c_core videodev via_ircc irda compat_ioctl32 v4l2_common v4l1_compat videobuf_dma_sg videobuf_core btcx_risc shpchp pci_hotplug hisax crc_ccitt isdn slhc via_agp agpgart ext3 jbd mbcache sg sr_mod cdrom sd_mod floppy uhci_hcd sata_sil pata_via pata_acpi ata_generic usbcore libata scsi_mod sundance mii thermal processor fan fbcon tileblit font bitblit softcursor fuse [ 99.366513] [ 99.366562] Pid: 5789, comm: hald Tainted: P (2.6.24-15-generic #1) [ 99.366622] EIP: 0060:[] EFLAGS: 00010282 CPU: 0 [ 99.366726] EIP is at snd_pcm_info+0x82/0x110 [snd_pcm] [ 99.366782] EAX: 0000005d EBX: dfac4000 ECX: 00000020 EDX: dfa4cc00 [ 99.366839] ESI: 00000000 EDI: dfa4cd20 EBP: f1c205d4 ESP: f1f15e98 [ 99.366895] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 99.366951] Process hald (pid: 5789, ti=f1f14000 task=dfa5c000 task.ti=f1f14000) [ 99.367010] Stack: dfa4cc00 dfa4cc00 dfa3e4e0 f1c205d4 dfa96bb0 f9cbbd34 000040d0 f1c32480 [ 99.367387] dfa3e4e0 f1c324b0 f1c32480 00000000 f8b0e4a4 f1fe6aa0 01f15f30 ffffffff [ 99.367763] f1c39500 00000000 f18cb010 f1fe6aa0 c01c43e6 f1fe6aa0 f18cb010 00000000 [ 99.368140] Call Trace: [ 99.368238] [] snd_pcm_proc_info_read+0x34/0x180 [snd_pcm] [ 99.368357] [] snd_info_entry_open+0x114/0x280 [snd] [ 99.368501] [] proc_reg_open+0x46/0x70 [ 99.368608] [] __dentry_open+0xbf/0x1c0 [ 99.368709] [] nameidata_to_filp+0x35/0x40 [ 99.368802] [] proc_reg_open+0x0/0x70 [ 99.368894] [] do_filp_open+0x50/0x60 [ 99.368992] [] check_pgt_cache+0x1b/0x20 [ 99.369102] [] get_unused_fd_flags+0x52/0xd0 [ 99.369202] [] do_sys_open+0x4c/0xe0 [ 99.369303] [] sys_open+0x1c/0x20 [ 99.369394] [] sysenter_past_esp+0x6b/0xa9 [ 99.369517] ======================= [ 99.369566] Code: 50 00 00 00 8b 04 24 83 c0 50 e8 5a 5d 55 c6 0f b7 43 14 b9 20 00 00 00 8b 14 24 89 82 c0 00 00 00 0f b7 43 16 89 82 c4 00 00 00 <8b> 46 08 89 82 c8 00 00 00 8b 46 08 2b 46 0c 89 82 cc 00 00 00 [ 99.371900] EIP: [] snd_pcm_info+0x82/0x110 [snd_pcm] SS:ESP 0068:f1f15e98 [ 99.372103] ---[ end trace ffa9cdf9b5219d61 ]--- [ 100.644511] NET: Registered protocol family 17 [ 101.481652] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 103.376313] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 105.071662] [fglrx] Internal AGP support requested, but kernel AGP support active. [ 105.071680] [fglrx] Have to use kernel AGP support to avoid conflicts. [ 105.071690] [fglrx] AGP detected, AgpState = 0x1f000207 (hardware caps of chipset) [ 105.071872] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 105.071902] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 105.071985] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 105.072033] [fglrx] AGP enabled, AgpCommand = 0x1f000304 (selected caps) [ 105.094192] [fglrx] GART Table is not in FRAME_BUFFER range [ 105.094216] [fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000 [ 105.094223] [fglrx] Reserve Block - 1 offset = 0Xffff000 length = 0X1000 [ 105.433192] [fglrx] interrupt source 20008000 successfully enabled [ 105.433206] [fglrx] enable ID = 0x00000004 [ 105.433229] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000 [ 105.433374] [fglrx] interrupt source 10000000 successfully enabled [ 105.433381] [fglrx] enable ID = 0x00000005 [ 105.433390] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000 [ 209.682233] end_request: I/O error, dev fd0, sector 0 [ 209.710268] end_request: I/O error, dev fd0, sector 0 [ 286.597124] gnome-keyring-d[6244]: segfault at 00000000 eip 080ae750 esp bfda72fc error 4