LSPCI 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02) 00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 7600 GT (rev a2) 02:01.0 Network controller: RaLink RT2561/RT61 802.11g PCI 02:04.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) LSMOD Module Size Used by nls_iso8859_1 4096 1 nls_cp437 5760 1 vfat 13184 1 fat 52892 1 vfat rfcomm 39188 2 l2cap 23300 13 rfcomm bluetooth 56164 4 rfcomm,l2cap ppdev 9348 0 ipv6 255044 12 speedstep_lib 5380 0 cpufreq_conservative 7200 0 cpufreq_ondemand 8084 0 cpufreq_userspace 4120 0 cpufreq_stats 5124 0 cpufreq_powersave 1792 0 freq_table 4484 2 cpufreq_ondemand,cpufreq_stats container 4736 0 video 18832 0 output 3712 1 video ac 6020 0 dock 10124 0 sbs 14216 0 sbshc 6784 1 sbs battery 13316 0 iptable_filter 2944 0 ip_tables 13000 1 iptable_filter x_tables 14852 1 ip_tables aes_i586 32640 0 dm_crypt 14340 0 dm_mod 60484 1 dm_crypt sbp2 22920 0 parport_pc 35108 0 lp 11332 0 parport 35912 3 ppdev,parport_pc,lp joydev 11840 0 evdev 11776 4 rtc 13212 0 pcspkr 3072 0 xpad 10632 0 led_class 5124 1 xpad serio_raw 7044 0 ff_memless 5640 1 xpad psmouse 39056 0 usbhid 30592 0 hid 36224 1 usbhid usblp 14592 0 snd_intel8x0 33308 2 snd_ac97_codec 99364 1 snd_intel8x0 ac97_bus 2176 1 snd_ac97_codec snd_pcm_oss 38656 0 snd_mixer_oss 16640 1 snd_pcm_oss snd_pcm 71304 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss arc4 2048 2 ecb 3584 2 blkcipher 7428 1 ecb snd_seq_dummy 3844 0 rt61pci 24576 0 rt2x00pci 10368 1 rt61pci rt2x00lib 21632 2 rt61pci,rt2x00pci rfkill 7568 1 rt2x00lib input_polldev 5000 1 rt2x00lib snd_seq_oss 32000 0 nvidia 7819392 24 crc_itu_t 2176 1 rt2x00lib snd_seq_midi 8576 0 mac80211 162708 3 rt61pci,rt2x00pci,rt2x00lib snd_rawmidi 24576 1 snd_seq_midi cfg80211 14088 1 mac80211 eeprom_93cx6 2304 1 rt61pci snd_seq_midi_event 7552 2 snd_seq_oss,snd_seq_midi i2c_core 23696 1 nvidia snd_seq 50416 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 22916 2 snd_pcm,snd_seq snd_seq_device 8332 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 52996 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device button 8336 0 soundcore 7520 1 snd snd_page_alloc 10376 2 snd_intel8x0,snd_pcm iTCO_wdt 11808 0 iTCO_vendor_support 3972 1 iTCO_wdt intel_agp 24596 1 agpgart 33328 2 nvidia,intel_agp shpchp 33428 0 pci_hotplug 29728 1 shpchp usb_storage 72512 1 libusual 18208 1 usb_storage ext3 132872 2 jbd 43028 1 ext3 mbcache 8192 1 ext3 sg 36256 0 sd_mod 29456 14 sr_mod 16804 0 cdrom 36512 1 sr_mod ata_generic 7428 0 pata_acpi 7424 0 floppy 58244 0 ata_piix 18692 10 ohci1394 32688 0 ieee1394 92216 2 sbp2,ohci1394 libata 159600 3 ata_generic,pata_acpi,ata_piix scsi_mod 151180 6 sbp2,usb_storage,sg,sd_mod,sr_mod,libata ehci_hcd 35852 0 uhci_hcd 25616 0 usbcore 143340 8 xpad,usbhid,usblp,usb_storage,libusual,ehci_hcd,uhci_hcd thermal 15772 0 processor 28080 1 thermal fan 4740 0 fuse 48404 15 DMESG [ 0.000000] Linux version 2.6.24-8-386 (buildd@rothera) (gcc version 4.2.3 (Ubuntu 4.2.3-1ubuntu2)) #1 Thu Feb 14 20:00:28 UTC 2008 (Ubuntu 2.6.24-8.14-386) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable) [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f3830 [ 0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261872 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261872 [ 0.000000] On node 0 totalpages: 261872 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32243 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7920 checksum 0 [ 0.000000] ACPI: RSDP 000F7920, 0014 (r0 IntelR) [ 0.000000] ACPI: RSDT 3FEF3040, 002C (r1 IntelR AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FEF30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3FEF3180, 3E5F (r1 INTELR AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FEF0000, 0040 [ 0.000000] ACPI: APIC 3FEF7040, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259827 [ 0.000000] Kernel command line: root=UUID=c1232fbe-045c-4928-a7cb-b2ac728c2d21 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2659.177 MHz processor. [ 23.247700] Console: colour VGA+ 80x25 [ 23.247704] console [tty0] enabled [ 23.248080] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 23.248595] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 23.270557] Memory: 1026620k/1047488k available (2071k kernel code, 20092k reserved, 973k data, 356k init, 129984k highmem) [ 23.270566] virtual kernel memory layout: [ 23.270567] fixmap : 0xfffa6000 - 0xfffff000 ( 356 kB) [ 23.270568] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 23.270570] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 23.270571] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 23.270572] .init : 0xc03fc000 - 0xc0455000 ( 356 kB) [ 23.270573] .data : 0xc0305f7d - 0xc03f93a4 ( 973 kB) [ 23.270574] .text : 0xc0100000 - 0xc0305f7d (2071 kB) [ 23.270577] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 23.270631] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 23.350639] Calibrating delay using timer specific routine.. 5322.59 BogoMIPS (lpj=10645188) [ 23.350667] Security Framework initialized [ 23.350673] SELinux: Disabled at boot. [ 23.350686] AppArmor: AppArmor initialized [ 23.350690] Failure registering capabilities with primary security module. [ 23.350698] Mount-cache hash table entries: 512 [ 23.350816] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001 00000000 [ 23.350825] monitor/mwait feature present. [ 23.350827] using mwait in idle threads. [ 23.350834] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 23.350836] CPU: L2 cache: 256K [ 23.350839] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000651d 00000000 00000001 00000000 [ 23.350848] Compat vDSO mapped to ffffe000. [ 23.350862] CPU: Intel(R) Celeron(R) CPU 2.66GHz stepping 09 [ 23.350870] Checking 'hlt' instruction... OK. [ 23.368508] Freeing SMP alternatives: 0k freed [ 23.368652] Early unpacking initramfs... done [ 23.699733] ACPI: Core revision 20070126 [ 23.699787] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 23.819075] ENABLING IO-APIC IRQs [ 23.819240] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 23.966692] net_namespace: 64 bytes [ 23.966699] Booting paravirtualized kernel on bare hardware [ 23.967355] Time: 23:00:22 Date: 02/23/08 [ 23.967414] NET: Registered protocol family 16 [ 23.967653] EISA bus registered [ 23.967680] ACPI: bus type pci registered [ 23.992894] PCI: PCI BIOS revision 2.10 entry at 0xf9e00, last bus=2 [ 23.992897] PCI: Using configuration type 1 [ 23.992899] Setting up standard PCI resources [ 24.009490] ACPI: EC: Look up EC in DSDT [ 24.013507] ACPI: Interpreter enabled [ 24.013513] ACPI: (supports S0 S3 S4 S5) [ 24.013531] ACPI: Using IOAPIC for interrupt routing [ 24.018626] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 24.019130] Force enabled HPET at base address 0xfed00000 [ 24.019136] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO [ 24.019140] PCI quirk: region 0480-04bf claimed by ICH4 GPIO [ 24.019671] PCI: Transparent bridge - 0000:00:1e.0 [ 24.019703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 24.019865] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 24.029045] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 24.029170] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 9 10 11 12 14 15) [ 24.029287] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 24.029402] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 24.029518] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 24.029633] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 24.029747] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 24.029864] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12 14 15) [ 24.030024] Linux Plug and Play Support v0.97 (c) Adam Belay [ 24.030066] pnp: PnP ACPI init [ 24.030078] ACPI: bus type pnp registered [ 24.032535] pnpacpi: exceeded the max number of mem resources: 12 [ 24.032634] pnp: PnP ACPI: found 10 devices [ 24.032637] ACPI: ACPI bus type pnp unregistered [ 24.032642] PnPBIOS: Disabled by ACPI PNP [ 24.032919] PCI: Using ACPI for IRQ routing [ 24.032923] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 24.054567] NET: Registered protocol family 8 [ 24.054570] NET: Registered protocol family 20 [ 24.054702] hpet clockevent registered [ 24.054708] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 24.054713] hpet0: 3 64-bit timers, 14318180 Hz [ 24.055753] AppArmor: AppArmor Filesystem Enabled [ 24.058518] Time: tsc clocksource has been installed. [ 24.066580] system 00:01: ioport range 0xb78-0xb7b has been reserved [ 24.066584] system 00:01: ioport range 0xf78-0xf7b has been reserved [ 24.066586] system 00:01: ioport range 0xa78-0xa7b has been reserved [ 24.066589] system 00:01: ioport range 0xe78-0xe7b has been reserved [ 24.066591] system 00:01: ioport range 0xbbc-0xbbf has been reserved [ 24.066594] system 00:01: ioport range 0xfbc-0xfbf has been reserved [ 24.066596] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 24.066599] system 00:01: ioport range 0x290-0x297 has been reserved [ 24.066602] system 00:01: ioport range 0x880-0x88f has been reserved [ 24.066612] system 00:07: ioport range 0x400-0x4bf could not be reserved [ 24.066620] system 00:09: iomem range 0xd0000-0xd3fff has been reserved [ 24.066623] system 00:09: iomem range 0xf0000-0xf7fff could not be reserved [ 24.066625] system 00:09: iomem range 0xf8000-0xfbfff could not be reserved [ 24.066628] system 00:09: iomem range 0xfc000-0xfffff could not be reserved [ 24.066631] system 00:09: iomem range 0x3fef0000-0x3fefffff could not be reserved [ 24.066634] system 00:09: iomem range 0x0-0x9ffff could not be reserved [ 24.066636] system 00:09: iomem range 0x100000-0x3feeffff could not be reserved [ 24.066640] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 24.066642] system 00:09: iomem range 0xfec01000-0xfed8ffff could not be reserved [ 24.066645] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved [ 24.066648] system 00:09: iomem range 0xffb00000-0xffb7ffff could not be reserved [ 24.066651] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved [ 24.097202] PCI: Bridge: 0000:00:01.0 [ 24.097205] IO window: disabled. [ 24.097210] MEM window: f0000000-f2ffffff [ 24.097214] PREFETCH window: e0000000-efffffff [ 24.097219] PCI: Bridge: 0000:00:1e.0 [ 24.097222] IO window: d000-dfff [ 24.097227] MEM window: f3000000-f30fffff [ 24.097230] PREFETCH window: disabled. [ 24.097248] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 24.097260] NET: Registered protocol family 2 [ 24.134569] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 24.134900] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 24.135559] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 24.135725] TCP: Hash tables configured (established 131072 bind 65536) [ 24.135729] TCP reno registered [ 24.146678] checking if image is initramfs... it is [ 24.558429] Switched to high resolution mode on CPU 0 [ 24.787588] Freeing initrd memory: 7275k freed [ 24.788257] audit: initializing netlink socket (disabled) [ 24.788270] audit(1203807623.296:1): initialized [ 24.788434] highmem bounce pool size: 64 pages [ 24.790379] VFS: Disk quotas dquot_6.5.1 [ 24.790408] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 24.790570] io scheduler noop registered [ 24.790573] io scheduler anticipatory registered [ 24.790575] io scheduler deadline registered [ 24.790590] io scheduler cfq registered (default) [ 24.790671] Boot video device is 0000:01:00.0 [ 24.790998] isapnp: Scanning for PnP cards... [ 25.142914] isapnp: No Plug & Play device found [ 25.200464] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 25.202098] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 25.202178] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 25.202402] PNP: No PS/2 controller found. Probing ports directly. [ 25.204912] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 25.204918] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 25.206375] mice: PS/2 mouse device common for all mice [ 25.206522] EISA: Probing bus 0 at eisa.0 [ 25.206561] EISA: Detected 0 cards. [ 25.206565] cpuidle: using governor ladder [ 25.206644] NET: Registered protocol family 1 [ 25.206674] Using IPI Shortcut mode [ 25.206704] registered taskstats version 1 [ 25.206794] Magic number: 12:106:50 [ 25.207141] Freeing unused kernel memory: 356k freed [ 26.472282] fuse init (API version 7.9) [ 26.479242] ACPI: Fan [FAN] (on) [ 26.488088] ACPI: Thermal Zone [THRM] (40 C) [ 27.127788] usbcore: registered new interface driver usbfs [ 27.127815] usbcore: registered new interface driver hub [ 27.135871] usbcore: registered new device driver usb [ 27.137074] USB Universal Host Controller Interface driver v3.0 [ 27.138111] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 27.138125] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 27.138129] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 27.138366] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 27.138396] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e300 [ 27.138546] usb usb1: configuration #1 chosen from 1 choice [ 27.138576] hub 1-0:1.0: USB hub found [ 27.138583] hub 1-0:1.0: 2 ports detected [ 27.216727] SCSI subsystem initialized [ 27.241781] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 [ 27.241795] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 27.241799] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 27.241830] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 27.241857] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e000 [ 27.241975] usb usb2: configuration #1 chosen from 1 choice [ 27.242003] hub 2-0:1.0: USB hub found [ 27.242010] hub 2-0:1.0: 2 ports detected [ 27.285665] libata version 3.00 loaded. [ 27.345737] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 27.345751] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 27.345755] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 27.345784] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 27.345810] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e100 [ 27.345940] usb usb3: configuration #1 chosen from 1 choice [ 27.345969] hub 3-0:1.0: USB hub found [ 27.345976] hub 3-0:1.0: 2 ports detected [ 27.377019] Floppy drive(s): fd0 is 1.44M [ 27.409384] FDC 0 is a post-1991 82077 [ 27.449703] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16 [ 27.449717] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 27.449721] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 27.449751] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 27.449776] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200 [ 27.449896] usb usb4: configuration #1 chosen from 1 choice [ 27.449924] hub 4-0:1.0: USB hub found [ 27.449931] hub 4-0:1.0: 2 ports detected [ 27.481630] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 27.553819] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19 [ 27.553834] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 27.553839] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 27.553878] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 27.557796] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 27.557806] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf3100000 [ 27.605566] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 27.605710] usb usb5: configuration #1 chosen from 1 choice [ 27.605741] hub 5-0:1.0: USB hub found [ 27.605749] hub 5-0:1.0: 8 ports detected [ 27.709759] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 27.762518] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[f3008000-f30087ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 27.774125] ata_piix 0000:00:1f.1: version 2.12 [ 27.774144] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 27.774180] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 27.775487] scsi0 : ata_piix [ 27.776468] scsi1 : ata_piix [ 27.777277] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 27.777281] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 28.001449] usb 1-1: device not accepting address 2, error -71 [ 28.461601] ata1.00: ATAPI: TSSTcorp CDW/DVD SH-M522C, TS07, max UDMA/33 [ 28.461634] ata1.01: ATAPI: LITE-ON DVDRW LH-20A1H, LL05, max UDMA/66 [ 28.461652] ata1.01: limited to UDMA/33 due to 40-wire cable [ 28.649490] ata1.00: configured for UDMA/33 [ 28.837440] ata1.01: configured for UDMA/33 [ 29.003016] ata2.00: ATA-7: Maxtor 6L200P0, BAJ41G20, max UDMA/133 [ 29.003021] ata2.00: 398297088 sectors, multi 16: LBA48 [ 29.019095] ata2.00: configured for UDMA/100 [ 29.019702] scsi 0:0:0:0: CD-ROM TSSTcorp CDW/DVD SH-M522C TS07 PQ: 0 ANSI: 5 [ 29.021134] scsi 0:0:1:0: CD-ROM LITE-ON DVDRW LH-20A1H LL05 PQ: 0 ANSI: 5 [ 29.021707] scsi 1:0:0:0: Direct-Access ATA Maxtor 6L200P0 BAJ4 PQ: 0 ANSI: 5 [ 29.021795] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 29.021814] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 [ 29.021849] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 29.022656] scsi2 : ata_piix [ 29.022955] scsi3 : ata_piix [ 29.023602] ata3: SATA max UDMA/133 cmd 0xe400 ctl 0xe500 bmdma 0xe800 irq 18 [ 29.023605] ata4: SATA max UDMA/133 cmd 0xe600 ctl 0xe700 bmdma 0xe808 irq 18 [ 29.045260] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011060000005971] [ 29.228362] ata3.00: ATA-7: ST380811AS, 3.AAE, max UDMA/133 [ 29.228367] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 29.289092] usb 5-3: new high speed USB device using ehci_hcd and address 4 [ 29.294990] ata3.00: configured for UDMA/133 [ 29.460141] scsi 2:0:0:0: Direct-Access ATA ST380811AS 3.AA PQ: 0 ANSI: 5 [ 29.475264] Driver 'sr' needs updating - please use bus_type methods [ 29.487049] Driver 'sd' needs updating - please use bus_type methods [ 29.487077] sr0: scsi3-mmc drive: 8x/52x writer cd/rw xa/form2 cdda tray [ 29.487081] Uniform CD-ROM driver Revision: 3.20 [ 29.487129] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 29.489448] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 29.489511] sr 0:0:1:0: Attached scsi CD-ROM sr1 [ 29.495104] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 29.495127] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 29.495148] scsi 1:0:0:0: Attached scsi generic sg2 type 0 [ 29.495167] scsi 2:0:0:0: Attached scsi generic sg3 type 0 [ 29.499739] sd 1:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB) [ 29.499757] sd 1:0:0:0: [sda] Write Protect is off [ 29.499760] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 29.499782] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.499843] sd 1:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB) [ 29.499856] sd 1:0:0:0: [sda] Write Protect is off [ 29.499859] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 29.499878] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.499883] sda:<6>usb 5-3: configuration #1 chosen from 1 choice [ 29.523200] sda1 < sda5 sda6 sda7 sda8 sda9 > [ 29.578487] sd 1:0:0:0: [sda] Attached SCSI disk [ 29.578564] sd 2:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) [ 29.578580] sd 2:0:0:0: [sdb] Write Protect is off [ 29.578584] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 29.578606] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.578662] sd 2:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) [ 29.578675] sd 2:0:0:0: [sdb] Write Protect is off [ 29.578678] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 29.578697] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.578702] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 > [ 29.653284] sd 2:0:0:0: [sdb] Attached SCSI disk [ 29.992933] usb 5-6: new high speed USB device using ehci_hcd and address 6 [ 30.094143] Attempting manual resume [ 30.094148] swsusp: Resume From Partition 8:24 [ 30.094150] PM: Checking swsusp image. [ 30.094329] PM: Resume from disk failed. [ 30.128437] kjournald starting. Commit interval 5 seconds [ 30.128453] EXT3-fs: mounted filesystem with ordered data mode. [ 30.129073] usb 5-6: configuration #1 chosen from 1 choice [ 30.368806] usb 1-1: new full speed USB device using uhci_hcd and address 4 [ 30.538147] usb 1-1: configuration #1 chosen from 1 choice [ 30.541057] hub 1-1:1.0: USB hub found [ 30.543029] hub 1-1:1.0: 4 ports detected [ 30.892667] usb 1-2: new full speed USB device using uhci_hcd and address 5 [ 31.041938] usb 1-2: configuration #1 chosen from 1 choice [ 31.044865] hub 1-2:1.0: USB hub found [ 31.046826] hub 1-2:1.0: 4 ports detected [ 31.396578] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 31.580701] usb 2-2: configuration #1 chosen from 1 choice [ 31.785527] usb 1-1.1: new full speed USB device using uhci_hcd and address 6 [ 31.890615] usb 1-1.1: configuration #1 chosen from 1 choice [ 32.097395] usb 1-1.2: new full speed USB device using uhci_hcd and address 7 [ 32.223448] usb 1-1.2: configuration #1 chosen from 1 choice [ 32.226371] hub 1-1.2:1.0: USB hub found [ 32.228337] hub 1-1.2:1.0: 2 ports detected [ 32.542213] usb 1-1.3: new low speed USB device using uhci_hcd and address 8 [ 32.679261] usb 1-1.3: configuration #1 chosen from 1 choice [ 32.894070] usb 1-2.1: new low speed USB device using uhci_hcd and address 9 [ 33.064200] usb 1-2.1: configuration #1 chosen from 1 choice [ 33.269916] usb 1-2.2: new low speed USB device using uhci_hcd and address 10 [ 33.408009] usb 1-2.2: configuration #1 chosen from 1 choice [ 33.617783] usb 1-1.2.1: new full speed USB device using uhci_hcd and address 11 [ 33.745866] usb 1-1.2.1: configuration #1 chosen from 1 choice [ 33.752729] usbcore: registered new interface driver libusual [ 33.967229] Initializing USB Mass Storage driver... [ 33.967322] scsi4 : SCSI emulation for USB Mass Storage devices [ 33.967418] usbcore: registered new interface driver usb-storage [ 33.967421] USB Mass Storage support registered. [ 33.967628] usb-storage: device found at 6 [ 33.967631] usb-storage: waiting for device to settle before scanning [ 35.973230] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 36.000849] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 36.042324] Linux agpgart interface v0.102 [ 36.045260] agpgart: Detected an Intel 865 Chipset. [ 36.171065] agpgart: AGP aperture is 256M @ 0xd0000000 [ 36.329882] iTCO_vendor_support: vendor-support=0 [ 36.335449] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 36.335570] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460) [ 36.343200] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 36.451684] intel_rng: FWH not detected [ 36.719283] input: Power Button (FF) as /devices/virtual/input/input1 [ 36.734515] ACPI: Power Button (FF) [PWRF] [ 36.734635] input: Power Button (CM) as /devices/virtual/input/input2 [ 36.747092] ACPI: Power Button (CM) [PWRB] [ 37.678794] nvidia: module license 'NVIDIA' taints kernel. [ 38.130027] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 21 [ 38.167031] phy0: Selected rate control algorithm 'simple' [ 38.936451] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 22 [ 38.936473] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 38.972003] usb-storage: device scan complete [ 38.972818] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0 [ 38.973575] scsi 4:0:0:1: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0 [ 38.974321] scsi 4:0:0:2: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0 [ 38.975075] scsi 4:0:0:3: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0 [ 38.976488] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 38.976538] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 38.977607] sd 4:0:0:1: [sdd] Attached SCSI removable disk [ 38.977654] sd 4:0:0:1: Attached scsi generic sg5 type 0 [ 38.978738] sd 4:0:0:2: [sde] Attached SCSI removable disk [ 38.978789] sd 4:0:0:2: Attached scsi generic sg6 type 0 [ 38.979855] sd 4:0:0:3: [sdf] Attached SCSI removable disk [ 38.979904] sd 4:0:0:3: Attached scsi generic sg7 type 0 [ 39.253965] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7304 [ 39.253993] usbcore: registered new interface driver usblp [ 39.258423] intel8x0_measure_ac97_clock: measured 54708 usecs [ 39.258428] intel8x0: clocking to 48000 [ 39.382950] usbcore: registered new interface driver hiddev [ 39.394841] input: HID 19fa:8d91 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input3 [ 39.394895] input,hidraw0: USB HID v1.10 Joystick [HID 19fa:8d91] on usb-0000:00:1d.0-1.1 [ 39.413929] input: HID 19fa:8d91 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input4 [ 39.413981] input,hidraw1: USB HID v1.10 Joystick [HID 19fa:8d91] on usb-0000:00:1d.0-1.1 [ 39.448928] input: UC-LOGIC Tablet WP8060U as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input5 [ 39.458548] input,hiddev96,hidraw2: USB HID v1.00 Mouse [UC-LOGIC Tablet WP8060U] on usb-0000:00:1d.0-1.3 [ 39.483701] input: Chicony Saitek Eclipse Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input6 [ 39.498455] input,hidraw3: USB HID v1.11 Keyboard [Chicony Saitek Eclipse Keyboard] on usb-0000:00:1d.0-2.1 [ 39.554435] input: Chicony Saitek Eclipse Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input7 [ 39.570426] input,hiddev97,hidraw4: USB HID v1.11 Device [Chicony Saitek Eclipse Keyboard] on usb-0000:00:1d.0-2.1 [ 39.588623] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input8 [ 39.602402] input,hidraw5: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-2.2 [ 39.602426] usbcore: registered new interface driver usbhid [ 39.602430] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 39.648666] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 39.648862] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.09 Fri Jan 11 14:38:28 PST 2008 [ 39.705741] input: Mad Catz Lynx Wireless Controller as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input9 [ 39.705764] usbcore: registered new interface driver xpad [ 39.705768] /build/buildd/linux-2.6.24/drivers/input/joystick/xpad.c: X-Box pad driver:v0.0.6 [ 39.812146] input: PC Speaker as /devices/platform/pcspkr/input/input10 [ 39.994087] Real Time Clock Driver v1.12ac [ 52.289379] lp: driver loaded but no devices found [ 52.489969] Adding 1004020k swap on /dev/sdb8. Priority:-1 extents:1 across:1004020k [ 53.151047] EXT3 FS on sdb6, internal journal [ 53.285504] device-mapper: uevent: version 1.0.3 [ 53.285538] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 54.158436] kjournald starting. Commit interval 5 seconds [ 54.158569] EXT3 FS on sdb7, internal journal [ 54.158575] EXT3-fs: mounted filesystem with ordered data mode. [ 55.746124] ip_tables: (C) 2000-2006 Netfilter Core Team [ 56.183788] No dock devices found. [ 56.269678] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 59.108710] NET: Registered protocol family 10 [ 59.109652] lo: Disabled Privacy Extensions [ 59.346624] ppdev: user-space parallel port driver [ 59.901040] audit(1203832858.888:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5184 profile="/usr/sbin/cupsd" namespace="default" [ 60.129739] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 60.129745] apm: overridden by ACPI. [ 60.552608] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 60.552628] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 60.552660] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [ 66.136780] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 66.456132] Bluetooth: Core ver 2.11 [ 66.456203] NET: Registered protocol family 31 [ 66.456205] Bluetooth: HCI device and connection manager initialized [ 66.456208] Bluetooth: HCI socket layer initialized [ 66.497474] Bluetooth: L2CAP ver 2.9 [ 66.497482] Bluetooth: L2CAP socket layer initialized [ 66.523308] Bluetooth: RFCOMM socket layer initialized [ 66.523326] Bluetooth: RFCOMM TTY layer initialized [ 66.523329] Bluetooth: RFCOMM ver 1.8 [ 68.243048] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 90.318836] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 92.971377] usb 1-2.2: USB disconnect, address 10 [ 102.382508] usb 1-2.2: new low speed USB device using uhci_hcd and address 12 [ 102.519555] usb 1-2.2: configuration #1 chosen from 1 choice [ 102.545092] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input11 [ 102.570118] input,hidraw5: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-2.2 [ 112.369027] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 134.395066] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 156.413215] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 178.431157] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 200.445401] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 322.436499] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 330.825511] usb 1-2.2: USB disconnect, address 12 [ 414.447126] usb 1-2.2: new low speed USB device using uhci_hcd and address 13 [ 414.583188] usb 1-2.2: configuration #1 chosen from 1 choice [ 414.608661] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input12 [ 414.634852] input,hidraw5: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-2.2 [ 444.423658] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 566.462856] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 688.450078] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 710.468150] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 721.448827] usb 1-2.2: USB disconnect, address 13 [ 725.103335] usb 1-2.2: new low speed USB device using uhci_hcd and address 14 [ 725.239411] usb 1-2.2: configuration #1 chosen from 1 choice [ 725.264862] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input13 [ 725.291456] input,hidraw5: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-2.2 [ 726.182880] usb 1-2.2: USB disconnect, address 14 [ 732.482408] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 754.496347] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 776.510474] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 821.705601] usb 1-2.2: new low speed USB device using uhci_hcd and address 15 [ 821.842657] usb 1-2.2: configuration #1 chosen from 1 choice [ 821.868113] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input14 [ 821.900109] input,hidraw5: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-2.2 [ 866.285256] usb 1-2.2: USB disconnect, address 15 [ 869.812821] usb 1-2.2: new low speed USB device using uhci_hcd and address 16 [ 869.948875] usb 1-2.2: configuration #1 chosen from 1 choice [ 869.974268] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input15 [ 870.000542] input,hidraw5: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-2.2 [ 897.248512] usb 1-2.2: USB disconnect, address 16 [ 898.497622] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 1020.484831] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 1142.472004] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 1167.288439] usb 1-2.2: new low speed USB device using uhci_hcd and address 17 [ 1167.425498] usb 1-2.2: configuration #1 chosen from 1 choice [ 1167.450812] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input16 [ 1167.479223] input,hidraw5: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-2.2 [ 1264.459250] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 1286.473283] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 1308.487476] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 1401.361144] usb 1-2.2: USB disconnect, address 17 [ 1403.097448] usb 1-2.2: new low speed USB device using uhci_hcd and address 18 [ 1403.233500] usb 1-2.2: configuration #1 chosen from 1 choice [ 1403.258870] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input17 [ 1403.284956] input,hidraw5: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-2.2 [ 1405.071617] usb 1-2.2: USB disconnect, address 18 [ 1430.474686] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 1552.461793] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 1674.449103] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 1777.856282] usb 1-2.2: new low speed USB device using uhci_hcd and address 19 [ 1777.993341] usb 1-2.2: configuration #1 chosen from 1 choice [ 1778.018610] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input18 [ 1778.051106] input,hidraw5: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-2.2 [ 1796.436295] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 1904.109112] usb 5-5: new high speed USB device using ehci_hcd and address 7 [ 1904.245498] usb 5-5: configuration #1 chosen from 1 choice [ 1904.256053] scsi5 : SCSI emulation for USB Mass Storage devices [ 1904.261208] usb-storage: device found at 7 [ 1904.261214] usb-storage: waiting for device to settle before scanning [ 1909.259833] usb-storage: device scan complete [ 1909.260508] scsi 5:0:0:0: Direct-Access Memorex Flashdrive 601B PMAP PQ: 0 ANSI: 0 CCS [ 1909.793719] sd 5:0:0:0: [sdg] 977664 512-byte hardware sectors (501 MB) [ 1909.794602] sd 5:0:0:0: [sdg] Write Protect is off [ 1909.794608] sd 5:0:0:0: [sdg] Mode Sense: 23 00 00 00 [ 1909.794611] sd 5:0:0:0: [sdg] Assuming drive cache: write through [ 1909.797092] sd 5:0:0:0: [sdg] 977664 512-byte hardware sectors (501 MB) [ 1909.797726] sd 5:0:0:0: [sdg] Write Protect is off [ 1909.797731] sd 5:0:0:0: [sdg] Mode Sense: 23 00 00 00 [ 1909.797733] sd 5:0:0:0: [sdg] Assuming drive cache: write through [ 1909.797739] sdg: sdg1 [ 1909.798694] sd 5:0:0:0: [sdg] Attached SCSI removable disk [ 1909.798746] sd 5:0:0:0: Attached scsi generic sg8 type 0 [ 1918.423413] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 1940.441489] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 1962.459576] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 1984.473632] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 2003.993248] usb 1-2.2: USB disconnect, address 19 [ 2006.487912] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 2028.501845] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 2042.833281] usb 1-2.2: new low speed USB device using uhci_hcd and address 20 [ 2042.969345] usb 1-2.2: configuration #1 chosen from 1 choice [ 2042.994759] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input19 [ 2043.020975] input,hidraw5: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-2.2 [ 2075.004038] usb 1-2.2: USB disconnect, address 20 [ 2078.659548] usb 1-2.2: new low speed USB device using uhci_hcd and address 21 [ 2078.795609] usb 1-2.2: configuration #1 chosen from 1 choice [ 2078.822031] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input20 [ 2078.847335] input,hidraw5: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-2.2 [ 2080.761627] usb 1-2.2: USB disconnect, address 21 [ 2084.546133] usb 1-2.2: new low speed USB device using uhci_hcd and address 22 [ 2084.683184] usb 1-2.2: configuration #1 chosen from 1 choice [ 2084.709661] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input21 [ 2084.740640] input,hidraw5: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-2.2 [ 2106.351144] usb 1-2.2: USB disconnect, address 22 [ 2150.489032] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 2206.860813] usb 1-2.2: new low speed USB device using uhci_hcd and address 23 [ 2206.997890] usb 1-2.2: configuration #1 chosen from 1 choice [ 2207.024141] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input22 [ 2207.055760] input,hidraw5: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-2.2