[ 0.000000] Linux version 2.6.24-12-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP Wed Mar 12 22:31:43 UTC 2008 (Ubuntu 2.6.24-12.22-generic) [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- locale=sv_SE console-setup/layoutcode=se [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable) [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6d0000 (usable) [ 0.000000] BIOS-e820: 00000000bf6d0000 - 00000000bf6e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf6e3000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 784080) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1310720 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7120 checksum 0 [ 0.000000] ACPI: RSDP 000F7120, 0024 (r2 TOSCPL) [ 0.000000] ACPI: XSDT BF6D7A33, 009C (r1 TOSCPL TOSCPL00 6040000 LTP 0) [ 0.000000] ACPI: FACP BF6DFB60, 00F4 (r3 TOSCPL CRESTLNE 6040000 ALAN 1) [ 0.000000] ACPI: DSDT BF6D8E1A, 6CD2 (r2 TOSCPL CRESTLNE 6040000 INTL 20060608) [ 0.000000] ACPI: FACS BF6E2FC0, 0040 [ 0.000000] ACPI: APIC BF6DFC54, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: HPET BF6DFCBC, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG BF6DFCF4, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: TCPA BF6DFD30, 0032 (r1 Intel CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: TMOR BF6DFD62, 0026 (r1 PTLTD 6040000 PTL 3) [ 0.000000] ACPI: SLIC BF6DFD88, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR 0) [ 0.000000] ACPI: OSFR BF6DFEFE, 0072 (r1 TOSHIB A+2nd ID 6040000 TASM 4010000) [ 0.000000] ACPI: APIC BF6DFF70, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT BF6DFFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SSDT BF6D8B6D, 02AD (r1 SataRe SataAhci 1000 INTL 20050624) [ 0.000000] ACPI: SSDT BF6D8ACA, 00A3 (r1 BrtRef DD01BRT 1000 INTL 20050624) [ 0.000000] ACPI: SSDT BF6D805B, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT BF6D7FB5, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT BF6D7ACF, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: DMI detected: Toshiba [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 784080) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1310720 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 155 [ 0.000000] 0: 256 -> 784080 [ 0.000000] 0: 1048576 -> 1310720 [ 0.000000] On node 0 totalpages: 1046123 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1216 pages reserved [ 0.000000] DMA zone: 2723 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765704 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009b000 - 000000000009c000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009c000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000bf6d0000 - 00000000bf6e3000 [ 0.000000] swsusp: Registered nosave memory region: 00000000bf6e3000 - 00000000c0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000c0000000 - 00000000e0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec10000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec10000 - 00000000fed00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fed14000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed14000 - 00000000fed1a000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed1c000 - 00000000fed90000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed90000 - 00000000fee00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ff000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1026987 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- locale=sv_SE console-setup/layoutcode=se [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 38.447669] Marking TSC unstable due to TSCs unsynchronized [ 38.447671] time.c: Detected 1795.499 MHz processor. [ 38.449004] Console: colour VGA+ 80x25 [ 38.449008] console [tty0] enabled [ 38.449030] Checking aperture... [ 38.449043] Calgary: detecting Calgary via BIOS EBDA area [ 38.449044] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 38.449046] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 38.482224] Placing software IO TLB between 0x103b000 - 0x503b000 [ 38.519591] Memory: 4033572k/5242880k available (2466k kernel code, 150920k reserved, 1310k data, 316k init) [ 38.519625] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 38.597570] Calibrating delay using timer specific routine.. 3594.38 BogoMIPS (lpj=7188766) [ 38.597603] Security Framework initialized [ 38.597609] SELinux: Disabled at boot. [ 38.597621] AppArmor: AppArmor initialized [ 38.597625] Failure registering capabilities with primary security module. [ 38.598046] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 38.600427] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 38.601512] Mount-cache hash table entries: 256 [ 38.601679] CPU: L1 I cache: 32K, L1 D cache: 32K [ 38.601682] CPU: L2 cache: 2048K [ 38.601684] CPU 0/0 -> Node 0 [ 38.601685] using mwait in idle threads. [ 38.601687] CPU: Physical Processor ID: 0 [ 38.601689] CPU: Processor Core ID: 0 [ 38.601694] CPU0: Thermal monitoring handled by SMI [ 38.601707] SMP alternatives: switching to UP code [ 38.602449] Early unpacking initramfs... done [ 38.971901] ACPI: Core revision 20070126 [ 38.971945] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 39.079079] Using local APIC timer interrupts. [ 39.134747] APIC timer calibration result 12468745 [ 39.134748] Detected 12.468 MHz APIC timer. [ 39.134824] SMP alternatives: switching to SMP code [ 39.135478] Booting processor 1/2 APIC 0x1 [ 39.145775] Initializing CPU#1 [ 39.222709] Calibrating delay using timer specific routine.. 3590.98 BogoMIPS (lpj=7181964) [ 39.222715] CPU: L1 I cache: 32K, L1 D cache: 32K [ 39.222717] CPU: L2 cache: 2048K [ 39.222719] CPU 1/1 -> Node 0 [ 39.222721] CPU: Physical Processor ID: 0 [ 39.222722] CPU: Processor Core ID: 1 [ 39.222728] CPU1: Thermal monitoring enabled (TM2) [ 39.223055] Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d [ 39.223085] Brought up 2 CPUs [ 39.223168] CPU0 attaching sched-domain: [ 39.223170] domain 0: span 03 [ 39.223172] groups: 01 02 [ 39.223175] domain 1: span 03 [ 39.223176] groups: 03 [ 39.223178] CPU1 attaching sched-domain: [ 39.223180] domain 0: span 03 [ 39.223181] groups: 02 01 [ 39.223183] domain 1: span 03 [ 39.223185] groups: 03 [ 39.223405] net_namespace: 120 bytes [ 39.223815] Time: 23:22:12 Date: 04/15/08 [ 39.223870] NET: Registered protocol family 16 [ 39.224057] ACPI: bus type pci registered [ 39.224133] PCI: Using configuration type 1 [ 39.225479] ACPI: EC: Look up EC in DSDT [ 39.231978] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 39.232481] ACPI: Interpreter enabled [ 39.232483] ACPI: (supports S0 S3 S4 S5) [ 39.232498] ACPI: Using IOAPIC for interrupt routing [ 39.238401] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 39.279317] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 39.279319] ACPI: EC: driver started in interrupt mode [ 39.279359] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 39.280434] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 39.280438] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 39.282054] PCI: Transparent bridge - 0000:00:1e.0 [ 39.282157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 39.282570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 39.282715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 39.282855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 39.282995] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 39.283133] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 39.283287] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 39.297143] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 39.297252] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 39.297360] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 39.297471] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 39.297578] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 39.297684] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 39.297788] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 39.297893] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 39.298046] Linux Plug and Play Support v0.97 (c) Adam Belay [ 39.298076] pnp: PnP ACPI init [ 39.298084] ACPI: bus type pnp registered [ 39.322873] pnp: PnP ACPI: found 10 devices [ 39.322875] ACPI: ACPI bus type pnp unregistered [ 39.323097] PCI: Using ACPI for IRQ routing [ 39.323100] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 39.334667] NET: Registered protocol family 8 [ 39.334668] NET: Registered protocol family 20 [ 39.334701] PCI-GART: No AMD northbridge found. [ 39.334707] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 39.334710] hpet0: 3 64-bit timers, 14318180 Hz [ 39.335748] AppArmor: AppArmor Filesystem Enabled [ 39.338644] Time: hpet clocksource has been installed. [ 39.338656] Switched to high resolution mode on CPU 0 [ 39.339007] Switched to high resolution mode on CPU 1 [ 39.346632] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 39.346635] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 39.346638] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 39.346641] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 39.346643] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 39.346646] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 39.346648] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved [ 39.346651] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 39.346658] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 39.346664] system 00:06: ioport range 0x680-0x69f has been reserved [ 39.346666] system 00:06: ioport range 0x800-0x80f has been reserved [ 39.346669] system 00:06: ioport range 0x1000-0x107f has been reserved [ 39.346671] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 39.346673] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 39.346676] system 00:06: ioport range 0xff00-0xff7f has been reserved [ 39.347084] PCI: Bridge: 0000:00:1c.0 [ 39.347087] IO window: 2000-2fff [ 39.347093] MEM window: f0000000-f3ffffff [ 39.347097] PREFETCH window: ce000000-cfffffff [ 39.347103] PCI: Bridge: 0000:00:1c.1 [ 39.347106] IO window: 3000-3fff [ 39.347112] MEM window: f4000000-f7ffffff [ 39.347116] PREFETCH window: cc000000-cdffffff [ 39.347121] PCI: Bridge: 0000:00:1c.2 [ 39.347124] IO window: 4000-4fff [ 39.347129] MEM window: f8000000-fbffffff [ 39.347133] PREFETCH window: ca000000-cbffffff [ 39.347139] PCI: Bridge: 0000:00:1c.3 [ 39.347142] IO window: 5000-5fff [ 39.347147] MEM window: c4000000-c7ffffff [ 39.347151] PREFETCH window: c8000000-c9ffffff [ 39.347156] PCI: Bridge: 0000:00:1c.4 [ 39.347157] IO window: disabled. [ 39.347163] MEM window: disabled. [ 39.347167] PREFETCH window: disabled. [ 39.347177] PCI: Bus 13, cardbus bridge: 0000:0c:04.0 [ 39.347179] IO window: 00001400-000014ff [ 39.347183] IO window: 00006000-000060ff [ 39.347188] PREFETCH window: 140000000-143ffffff [ 39.347193] MEM window: 144000000-147ffffff [ 39.347197] PCI: Bridge: 0000:00:1e.0 [ 39.347198] IO window: disabled. [ 39.347204] MEM window: fc200000-fc2fffff [ 39.347208] PREFETCH window: disabled. [ 39.347240] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 39.347247] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 39.347271] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 39.347277] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 39.347301] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 39.347307] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 39.347331] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 39.347337] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 39.347361] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 [ 39.347366] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 39.347380] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 39.347398] ACPI: PCI Interrupt 0000:0c:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 39.347410] NET: Registered protocol family 2 [ 39.382741] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 39.384091] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 39.388400] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 39.388941] TCP: Hash tables configured (established 524288 bind 65536) [ 39.388944] TCP reno registered [ 39.398734] checking if image is initramfs... it is [ 40.204076] Freeing initrd memory: 8167k freed [ 40.208345] Simple Boot Flag at 0x36 set to 0x1 [ 40.209171] audit: initializing netlink socket (disabled) [ 40.209189] audit(1208301732.652:1): initialized [ 40.211363] VFS: Disk quotas dquot_6.5.1 [ 40.211430] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 40.211546] io scheduler noop registered [ 40.211548] io scheduler anticipatory registered [ 40.211550] io scheduler deadline registered [ 40.211648] io scheduler cfq registered (default) [ 40.211658] Boot video device is 0000:00:02.0 [ 40.213956] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 40.214016] assign_interrupt_mode Found MSI capability [ 40.214065] Allocate Port Service[0000:00:1c.0:pcie00] [ 40.214118] Allocate Port Service[0000:00:1c.0:pcie02] [ 40.214222] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 40.214280] assign_interrupt_mode Found MSI capability [ 40.214327] Allocate Port Service[0000:00:1c.1:pcie00] [ 40.214357] Allocate Port Service[0000:00:1c.1:pcie02] [ 40.214457] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 40.214516] assign_interrupt_mode Found MSI capability [ 40.214562] Allocate Port Service[0000:00:1c.2:pcie00] [ 40.214591] Allocate Port Service[0000:00:1c.2:pcie02] [ 40.214691] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 40.214750] assign_interrupt_mode Found MSI capability [ 40.214797] Allocate Port Service[0000:00:1c.3:pcie00] [ 40.214827] Allocate Port Service[0000:00:1c.3:pcie02] [ 40.214927] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 40.214985] assign_interrupt_mode Found MSI capability [ 40.215031] Allocate Port Service[0000:00:1c.4:pcie00] [ 40.215059] Allocate Port Service[0000:00:1c.4:pcie02] [ 40.239008] Real Time Clock Driver v1.12ac [ 40.239243] hpet_resources: 0xfed00000 is busy [ 40.239273] Linux agpgart interface v0.102 [ 40.239276] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 40.240333] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 40.240395] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 40.240484] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 40.274720] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 40.274724] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 40.286118] mice: PS/2 mouse device common for all mice [ 40.286152] cpuidle: using governor ladder [ 40.286154] cpuidle: using governor menu [ 40.286287] NET: Registered protocol family 1 [ 40.286338] registered taskstats version 1 [ 40.286460] Magic number: 4:378:403 [ 40.286569] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 40.286572] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 40.286574] EDD information not available. [ 40.286580] Freeing unused kernel memory: 316k freed [ 40.330059] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 41.472894] fuse init (API version 7.9) [ 41.491542] ACPI: SSDT BF6D87CA, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 41.491782] ACPI: SSDT BF6D82BA, 048B (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 41.493853] Monitor-Mwait will be used to enter C-1 state [ 41.493856] Monitor-Mwait will be used to enter C-2 state [ 41.493858] Monitor-Mwait will be used to enter C-3 state [ 41.493976] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 41.493980] ACPI: Processor [CPU0] (supports 8 throttling states) [ 41.494221] ACPI: SSDT BF6D8A02, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 41.494445] ACPI: SSDT BF6D8745, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 41.496429] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 41.496434] ACPI: Processor [CPU1] (supports 8 throttling states) [ 41.635293] usbcore: registered new interface driver usbfs [ 41.635314] usbcore: registered new interface driver hub [ 41.636894] usbcore: registered new device driver usb [ 41.638010] USB Universal Host Controller Interface driver v3.0 [ 41.638058] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 41.638069] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 41.638073] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 41.638322] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 41.638358] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 [ 41.638497] usb usb1: configuration #1 chosen from 1 choice [ 41.638519] hub 1-0:1.0: USB hub found [ 41.638525] hub 1-0:1.0: 2 ports detected [ 41.741304] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 41.741317] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 41.741321] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 41.741344] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 41.741380] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 41.741501] usb usb2: configuration #1 chosen from 1 choice [ 41.741524] hub 2-0:1.0: USB hub found [ 41.741532] hub 2-0:1.0: 2 ports detected [ 41.843293] SCSI subsystem initialized [ 41.847989] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 41.848511] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 41.848518] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 41.848567] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 41.852479] ehci_hcd 0000:00:1a.7: debug port 1 [ 41.852486] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 41.852495] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc504800 [ 41.859615] libata version 3.00 loaded. [ 41.866104] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 41.866213] usb usb3: configuration #1 chosen from 1 choice [ 41.866237] hub 3-0:1.0: USB hub found [ 41.866246] hub 3-0:1.0: 4 ports detected [ 41.970155] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 41.970695] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 41.970701] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 41.970745] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 41.974645] ehci_hcd 0000:00:1d.7: debug port 1 [ 41.974651] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 41.974662] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00 [ 41.990094] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 41.990196] usb usb4: configuration #1 chosen from 1 choice [ 41.990217] hub 4-0:1.0: USB hub found [ 41.990223] hub 4-0:1.0: 6 ports detected [ 42.094085] r8169 Gigabit Ethernet driver 2.2LK loaded [ 42.094128] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 42.094152] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 42.094475] eth0: RTL8101e at 0xffffc2000105a000, 00:1b:38:3e:79:b7, XID 34000000 IRQ 506 [ 42.095478] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 42.095488] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 42.095491] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 42.095516] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 42.095547] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 42.095658] usb usb5: configuration #1 chosen from 1 choice [ 42.095680] hub 5-0:1.0: USB hub found [ 42.095686] hub 5-0:1.0: 2 ports detected [ 42.197027] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 42.197040] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 42.197044] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 42.197067] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 42.197103] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 [ 42.197210] usb usb6: configuration #1 chosen from 1 choice [ 42.197235] hub 6-0:1.0: USB hub found [ 42.197241] hub 6-0:1.0: 2 ports detected [ 42.278498] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 42.278513] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 42.278524] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 42.278558] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 42.278588] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 42.278695] usb usb7: configuration #1 chosen from 1 choice [ 42.278715] hub 7-0:1.0: USB hub found [ 42.278720] hub 7-0:1.0: 2 ports detected [ 42.285247] ACPI: PCI Interrupt 0000:0c:04.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 42.335407] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc206000-fc2067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 42.335527] ahci 0000:00:1f.2: version 3.0 [ 42.335558] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 42.349129] Clocksource tsc unstable (delta = -203782074 ns) [ 42.351292] usb 3-3: new high speed USB device using ehci_hcd and address 3 [ 42.390774] usb 3-3: configuration #1 chosen from 1 choice [ 42.437216] usb 5-2: new low speed USB device using uhci_hcd and address 2 [ 42.448856] usb 5-2: configuration #1 chosen from 1 choice [ 42.470421] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 42.470427] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 42.470435] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 42.470688] scsi0 : ahci [ 42.470736] scsi1 : ahci [ 42.470773] scsi2 : ahci [ 42.470856] ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 505 [ 42.470860] ata2: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 505 [ 42.470863] ata3: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504200 irq 505 [ 42.478275] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 42.485873] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f77ad40a60e] [ 42.499445] usb 1-2: configuration #1 chosen from 1 choice [ 42.502607] usbcore: registered new interface driver hiddev [ 42.515979] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input2 [ 42.536126] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2 [ 42.536154] usbcore: registered new interface driver usbhid [ 42.536158] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 42.552348] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 42.553296] ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC7DP, max UDMA/100 [ 42.553301] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 42.554923] ata1.00: configured for UDMA/100 [ 42.571844] ata2: SATA link down (SStatus 0 SControl 300) [ 42.584405] ata3: SATA link down (SStatus 0 SControl 300) [ 42.584546] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5 [ 42.584907] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 42.584942] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 42.584954] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 42.587469] ata_piix 0000:00:1f.1: version 2.12 [ 42.587484] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 42.587513] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 42.587591] scsi3 : ata_piix [ 42.587662] scsi4 : ata_piix [ 42.588213] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 42.588216] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 42.592160] Driver 'sd' needs updating - please use bus_type methods [ 42.595160] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 42.595178] sd 0:0:0:0: [sda] Write Protect is off [ 42.595181] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 42.595205] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.595266] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 42.595275] sd 0:0:0:0: [sda] Write Protect is off [ 42.595277] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 42.595292] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.595296] sda:<6>ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WT03, max UDMA/33 [ 43.010204] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 43.062580] sd 0:0:0:0: [sda] Attached SCSI disk [ 43.066426] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 43.079061] ata4.00: configured for UDMA/33 [ 43.246375] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WT03 PQ: 0 ANSI: 5 [ 43.246478] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 43.251454] Driver 'sr' needs updating - please use bus_type methods [ 43.255627] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 43.255633] Uniform CD-ROM driver Revision: 3.20 [ 43.255691] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 44.743185] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 44.795096] ISO 9660 Extensions: RRIP_1991A [ 45.178186] Registering unionfs 1.4 [ 45.178189] unionfs: debugging is not enabled [ 45.185827] loop: module loaded [ 45.502493] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 126.461448] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 127.055881] agpgart: Detected an Intel 965GM Chipset. [ 127.056893] agpgart: Detected 7676K stolen memory. [ 127.071641] agpgart: AGP aperture is 256M @ 0xd0000000 [ 127.554519] iTCO_vendor_support: vendor-support=0 [ 127.643326] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 127.724098] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 128.195924] ACPI: AC Adapter [ACAD] (on-line) [ 128.425122] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 128.425207] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 128.425220] iTCO_wdt: No card detected [ 128.449635] input: Power Button (FF) as /devices/virtual/input/input4 [ 128.507521] ACPI: Power Button (FF) [PWRF] [ 128.507576] input: Lid Switch as /devices/virtual/input/input5 [ 128.531542] ACPI: Lid Switch [LID0] [ 128.531595] input: Power Button (CM) as /devices/virtual/input/input6 [ 128.563596] ACPI: Battery Slot [BAT1] (battery present) [ 128.595448] ACPI: Power Button (CM) [PWRB] [ 128.671171] ACPI: PCI Interrupt 0000:0c:04.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 128.771876] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7 [ 128.824350] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 129.238903] sdhci: Secure Digital Host Controller Interface driver [ 129.238907] sdhci: Copyright(c) Pierre Ossman [ 129.238946] sdhci: SDHCI controller found at 0000:0c:04.3 [104c:803c] (rev 0) [ 129.238970] ACPI: PCI Interrupt 0000:0c:04.3[C] -> GSI 18 (level, low) -> IRQ 18 [ 129.239547] mmc0: SDHCI at 0xfc206800 irq 18 DMA [ 129.323559] Bluetooth: Core ver 2.11 [ 129.327562] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0 [ 129.327565] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 129.327710] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 129.327725] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 129.328277] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 129.330633] NET: Registered protocol family 31 [ 129.330636] Bluetooth: HCI device and connection manager initialized [ 129.330641] Bluetooth: HCI socket layer initialized [ 129.401300] Linux video capture interface: v2.00 [ 129.594494] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels [ 129.594925] wmaster0: Selected rate control algorithm 'iwl-3945-rs' [ 129.646393] Yenta: CardBus bridge found at 0000:0c:04.0 [1179:ff00] [ 129.646416] Yenta: Enabling burst memory read transactions [ 129.646421] Yenta: Using CSCINT to route CSC interrupts to PCI [ 129.646423] Yenta: Routing CardBus interrupts to PCI [ 129.646428] Yenta TI: socket 0000:0c:04.0, mfunc 0x10a01b22, devctl 0x64 [ 129.650085] input: PS/2 Mouse as /devices/virtual/input/input8 [ 129.733523] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9 [ 129.829883] Bluetooth: HCI USB driver ver 2.9 [ 129.832222] usbcore: registered new interface driver hci_usb [ 129.876620] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 [ 129.876624] Socket status: 30000006 [ 129.876627] Yenta: Raising subordinate bus# of parent bus (#0c) from #0d to #10 [ 129.876632] pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff [ 130.139726] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) [ 130.143415] usbcore: registered new interface driver uvcvideo [ 130.143420] USB Video Class driver (v0.1.0) [ 130.662038] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 130.662577] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 130.692640] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS... [ 133.162866] Adding 995988k swap on /dev/sda6. Priority:-1 extents:1 across:995988k [ 134.058343] ip_tables: (C) 2000-2006 Netfilter Core Team [ 135.547011] No dock devices found. [ 139.671369] lp: driver loaded but no devices found [ 139.755185] ppdev: user-space parallel port driver [ 145.681127] r8169: eth0: link down [ 145.819553] Bluetooth: L2CAP ver 2.9 [ 145.819561] Bluetooth: L2CAP socket layer initialized [ 145.983068] Bluetooth: RFCOMM socket layer initialized [ 145.983095] Bluetooth: RFCOMM TTY layer initialized [ 145.983099] Bluetooth: RFCOMM ver 1.8 [ 146.471387] NET: Registered protocol family 17 [ 149.304946] [drm] Initialized drm 1.1.0 20060810 [ 149.310707] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 149.310716] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 149.310770] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 149.321157] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 154.498289] NET: Registered protocol family 10 [ 154.498784] lo: Disabled Privacy Extensions [ 154.500880] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 154.502493] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 165.889563] CPU0 attaching NULL sched-domain. [ 165.889569] CPU1 attaching NULL sched-domain. [ 165.918802] CPU0 attaching sched-domain: [ 165.918810] domain 0: span 03 [ 165.918813] groups: 01 02 [ 165.918817] domain 1: span 03 [ 165.918819] groups: 03 [ 165.918822] CPU1 attaching sched-domain: [ 165.918824] domain 0: span 03 [ 165.918827] groups: 02 01 [ 165.918830] domain 1: span 03 [ 165.918832] groups: 03 [ 197.604613] wlan0: Initial auth_alg=0 [ 197.604624] wlan0: authenticate with AP 00:1b:11:69:03:21 [ 197.605742] wlan0: RX authentication from 00:1b:11:69:03:21 (alg=0 transaction=2 status=0) [ 197.605751] wlan0: authenticated [ 197.605755] wlan0: associate with AP 00:1b:11:69:03:21 [ 197.608231] wlan0: RX AssocResp from 00:1b:11:69:03:21 (capab=0x431 status=0 aid=1) [ 197.608240] wlan0: associated [ 197.608315] wlan0 (WE) : Wireless Event too big (320) [ 197.608433] wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0 [ 197.608440] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 [ 197.608446] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 [ 197.608452] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 [ 197.621340] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 201.387004] wlan0: no IPv6 routers present [ 203.473284] wlan0: no IPv6 routers present