[ 0.000000] Linux version 2.6.24-12-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP Wed Mar 12 23:01:54 UTC 2008 (Ubuntu 2.6.24-12.22-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fed0000 (usable) [ 0.000000] BIOS-e820: 000000007fed0000 - 000000007fedf000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fedf000 - 000000007ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f6820 [ 0.000000] Entering add_active_range(0, 0, 523984) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 523984 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 523984 [ 0.000000] On node 0 totalpages: 523984 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292307 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F67E0 checksum 0 [ 0.000000] ACPI: RSDP 000F67E0, 0024 (r2 LENOVO) [ 0.000000] ACPI: XSDT 7FED1599, 0084 (r1 LENOVO TP-79 2060 LTP 0) [ 0.000000] ACPI: FACP 7FED1700, 00F4 (r3 LENOVO TP-79 2060 LNVO 1) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT 7FED1B32, D29A (r1 LENOVO TP-79 2060 MSFT 100000E) [ 0.000000] ACPI: FACS 7FEF4000, 0040 [ 0.000000] ACPI: SSDT 7FED18B4, 027E (r1 LENOVO TP-79 2060 MSFT 100000E) [ 0.000000] ACPI: ECDT 7FEDEDCC, 0052 (r1 LENOVO TP-79 2060 LNVO 1) [ 0.000000] ACPI: TCPA 7FEDEE1E, 0032 (r2 LENOVO TP-79 2060 LNVO 1) [ 0.000000] ACPI: APIC 7FEDEE50, 0068 (r1 LENOVO TP-79 2060 LNVO 1) [ 0.000000] ACPI: MCFG 7FEDEEB8, 003C (r1 LENOVO TP-79 2060 LNVO 1) [ 0.000000] ACPI: HPET 7FEDEEF4, 0038 (r1 LENOVO TP-79 2060 LNVO 1) [ 0.000000] ACPI: BOOT 7FEDEFD8, 0028 (r1 LENOVO TP-79 2060 LTP 1) [ 0.000000] ACPI: SSDT 7FEF2697, 025F (r1 LENOVO TP-79 2060 INTL 20050513) [ 0.000000] ACPI: SSDT 7FEF28F6, 00A6 (r1 LENOVO TP-79 2060 INTL 20050513) [ 0.000000] ACPI: SSDT 7FEF299C, 04F7 (r1 LENOVO TP-79 2060 INTL 20050513) [ 0.000000] ACPI: SSDT 7FEF2E93, 01D8 (r1 LENOVO TP-79 2060 INTL 20050513) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519891 [ 0.000000] Kernel command line: root=UUID=b6760c68-4ac5-4352-8376-74056f327b1b ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2161.350 MHz processor. [ 10.758833] Console: colour VGA+ 80x25 [ 10.758837] console [tty0] enabled [ 10.759082] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 10.759385] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 10.862419] Memory: 2065964k/2095936k available (2164k kernel code, 28652k reserved, 1007k data, 364k init, 1178432k highmem) [ 10.862426] virtual kernel memory layout: [ 10.862427] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 10.862428] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 10.862429] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 10.862430] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 10.862431] .init : 0xc041f000 - 0xc047a000 ( 364 kB) [ 10.862432] .data : 0xc031d1bd - 0xc0418dc4 (1007 kB) [ 10.862433] .text : 0xc0100000 - 0xc031d1bd (2164 kB) [ 10.862436] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 10.862476] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 10.862600] hpet clockevent registered [ 10.942471] Calibrating delay using timer specific routine.. 4358.94 BogoMIPS (lpj=8717885) [ 10.942494] Security Framework initialized [ 10.942501] SELinux: Disabled at boot. [ 10.942515] AppArmor: AppArmor initialized [ 10.942519] Failure registering capabilities with primary security module. [ 10.942526] Mount-cache hash table entries: 512 [ 10.942646] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 [ 10.942654] monitor/mwait feature present. [ 10.942656] using mwait in idle threads. [ 10.942660] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.942662] CPU: L2 cache: 2048K [ 10.942664] CPU: Physical Processor ID: 0 [ 10.942666] CPU: Processor Core ID: 0 [ 10.942668] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000 [ 10.942676] Compat vDSO mapped to ffffe000. [ 10.942688] Checking 'hlt' instruction... OK. [ 10.958770] SMP alternatives: switching to UP code [ 10.960248] Early unpacking initramfs... done [ 11.239689] ACPI: Core revision 20070126 [ 11.239777] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 11.266502] CPU0: Intel Genuine Intel(R) CPU T2600 @ 2.16GHz stepping 08 [ 11.266518] SMP alternatives: switching to SMP code [ 11.267088] Booting processor 1/1 eip 3000 [ 11.277651] Initializing CPU#1 [ 11.358046] Calibrating delay using timer specific routine.. 4322.55 BogoMIPS (lpj=8645118) [ 11.358052] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 [ 11.358057] monitor/mwait feature present. [ 11.358060] CPU: L1 I cache: 32K, L1 D cache: 32K [ 11.358061] CPU: L2 cache: 2048K [ 11.358063] CPU: Physical Processor ID: 0 [ 11.358065] CPU: Processor Core ID: 1 [ 11.358066] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000 [ 11.358269] CPU1: Intel Genuine Intel(R) CPU T2600 @ 2.16GHz stepping 08 [ 11.358291] Total of 2 processors activated (8681.50 BogoMIPS). [ 11.358486] ENABLING IO-APIC IRQs [ 11.358680] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 11.505614] checking TSC synchronization [CPU#0 -> CPU#1]: [ 11.525587] Measured 615875 cycles TSC warp between CPUs, turning off TSC clock. [ 11.525590] Marking TSC unstable due to: check_tsc_sync_source failed. [ 11.525602] Brought up 2 CPUs [ 11.525625] CPU0 attaching sched-domain: [ 11.525627] domain 0: span 03 [ 11.525629] groups: 01 02 [ 11.525631] CPU1 attaching sched-domain: [ 11.525633] domain 0: span 03 [ 11.525634] groups: 02 01 [ 11.526132] net_namespace: 64 bytes [ 11.526138] Booting paravirtualized kernel on bare hardware [ 11.526553] Time: 16:58:24 Date: 03/27/08 [ 11.526602] NET: Registered protocol family 16 [ 11.526776] EISA bus registered [ 11.526781] ACPI: bus type pci registered [ 11.526968] PCI: PCI BIOS revision 2.10 entry at 0xfd84b, last bus=24 [ 11.526970] PCI: Using configuration type 1 [ 11.526972] Setting up standard PCI resources [ 11.530407] ACPI: EC: EC description table is found, configuring boot EC [ 11.537446] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 11.540206] ACPI: Interpreter enabled [ 11.540208] ACPI: (supports S0 S3 S4 S5) [ 11.540220] ACPI: Using IOAPIC for interrupt routing [ 11.547084] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 11.547086] ACPI: EC: driver started in poll mode [ 11.547235] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 11.547970] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 11.547974] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 11.549309] PCI: Transparent bridge - 0000:00:1e.0 [ 11.549400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 11.549548] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 11.549649] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 11.549753] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 11.549857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 11.549963] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 11.550068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 11.552500] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 11.552677] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 11.552851] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 11.553025] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 11.553199] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 11.553373] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 11.553550] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 11.553724] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 11.553876] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 11.553958] ACPI: Power Resource [PUBS] (on) [ 11.554008] Linux Plug and Play Support v0.97 (c) Adam Belay [ 11.554034] pnp: PnP ACPI init [ 11.554040] ACPI: bus type pnp registered [ 11.555071] pnpacpi: exceeded the max number of mem resources: 12 [ 11.557479] pnp: PnP ACPI: found 12 devices [ 11.557481] ACPI: ACPI bus type pnp unregistered [ 11.557484] PnPBIOS: Disabled by ACPI PNP [ 11.557973] PCI: Using ACPI for IRQ routing [ 11.557976] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 11.633703] NET: Registered protocol family 8 [ 11.633704] NET: Registered protocol family 20 [ 11.633735] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 11.633738] hpet0: 3 64-bit timers, 14318180 Hz [ 11.634769] AppArmor: AppArmor Filesystem Enabled [ 11.637295] Time: hpet clocksource has been installed. [ 11.637312] Switched to high resolution mode on CPU 0 [ 11.637695] Switched to high resolution mode on CPU 1 [ 11.650274] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 11.650277] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 11.650280] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 11.650282] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 11.650285] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 11.650287] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 11.650289] system 00:00: iomem range 0x0-0x0 could not be reserved [ 11.650292] system 00:00: iomem range 0x0-0x0 could not be reserved [ 11.650294] system 00:00: iomem range 0xdc000-0xdffff has been reserved [ 11.650296] system 00:00: iomem range 0xe0000-0xe3fff has been reserved [ 11.650299] system 00:00: iomem range 0xe4000-0xe7fff has been reserved [ 11.650301] system 00:00: iomem range 0xe8000-0xebfff has been reserved [ 11.650307] system 00:02: ioport range 0x164e-0x164f has been reserved [ 11.650309] system 00:02: ioport range 0x1000-0x107f has been reserved [ 11.650311] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 11.650314] system 00:02: ioport range 0x800-0x80f has been reserved [ 11.650316] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 11.650319] system 00:02: ioport range 0x1600-0x165f could not be reserved [ 11.650321] system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 11.650324] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 11.650327] system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved [ 11.650329] system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved [ 11.650332] system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved [ 11.680679] PCI: Bridge: 0000:00:01.0 [ 11.680681] IO window: 2000-2fff [ 11.680685] MEM window: ee100000-ee1fffff [ 11.680687] PREFETCH window: d0000000-dfffffff [ 11.680690] PCI: Bridge: 0000:00:1c.0 [ 11.680693] IO window: 3000-3fff [ 11.680698] MEM window: ee000000-ee0fffff [ 11.680702] PREFETCH window: disabled. [ 11.680707] PCI: Bridge: 0000:00:1c.1 [ 11.680710] IO window: 4000-5fff [ 11.680715] MEM window: ec000000-edffffff [ 11.680719] PREFETCH window: e4000000-e40fffff [ 11.680725] PCI: Bridge: 0000:00:1c.2 [ 11.680727] IO window: 6000-7fff [ 11.680733] MEM window: e8000000-e9ffffff [ 11.680737] PREFETCH window: e4100000-e41fffff [ 11.680742] PCI: Bridge: 0000:00:1c.3 [ 11.680745] IO window: 8000-9fff [ 11.680750] MEM window: ea000000-ebffffff [ 11.680754] PREFETCH window: e4200000-e42fffff [ 11.680761] PCI: Bus 22, cardbus bridge: 0000:15:00.0 [ 11.680763] IO window: 0000a000-0000a0ff [ 11.680768] IO window: 0000a400-0000a4ff [ 11.680773] PREFETCH window: e0000000-e3ffffff [ 11.680779] MEM window: 88000000-8bffffff [ 11.680783] PCI: Bridge: 0000:00:1e.0 [ 11.680786] IO window: a000-dfff [ 11.680791] MEM window: e4300000-e7ffffff [ 11.680796] PREFETCH window: e0000000-e3ffffff [ 11.680811] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 11.680816] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 11.680837] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17 [ 11.680843] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 11.680864] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 18 [ 11.680870] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 11.680891] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 19 [ 11.680896] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 11.680918] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 20 [ 11.680923] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 11.680933] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) [ 11.680939] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 11.680956] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 11.680969] NET: Registered protocol family 2 [ 11.725162] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 11.725349] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 11.725941] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 11.726249] TCP: Hash tables configured (established 131072 bind 65536) [ 11.726251] TCP reno registered [ 11.737224] checking if image is initramfs... it is [ 12.290231] Freeing initrd memory: 7287k freed [ 12.290393] Simple Boot Flag at 0x35 set to 0x1 [ 12.291288] audit: initializing netlink socket (disabled) [ 12.291302] audit(1206637104.284:1): initialized [ 12.291234] highmem bounce pool size: 64 pages [ 12.292972] VFS: Disk quotas dquot_6.5.1 [ 12.293038] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 12.293154] io scheduler noop registered [ 12.293156] io scheduler anticipatory registered [ 12.293158] io scheduler deadline registered [ 12.293167] io scheduler cfq registered (default) [ 12.293269] Boot video device is 0000:01:00.0 [ 12.293365] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 12.293395] assign_interrupt_mode Found MSI capability [ 12.293421] Allocate Port Service[0000:00:01.0:pcie00] [ 12.293490] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 12.293543] assign_interrupt_mode Found MSI capability [ 12.293586] Allocate Port Service[0000:00:1c.0:pcie00] [ 12.293615] Allocate Port Service[0000:00:1c.0:pcie02] [ 12.293707] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 12.293760] assign_interrupt_mode Found MSI capability [ 12.293801] Allocate Port Service[0000:00:1c.1:pcie00] [ 12.293831] Allocate Port Service[0000:00:1c.1:pcie02] [ 12.293925] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 12.293979] assign_interrupt_mode Found MSI capability [ 12.294020] Allocate Port Service[0000:00:1c.2:pcie00] [ 12.294051] Allocate Port Service[0000:00:1c.2:pcie02] [ 12.294145] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 12.294197] assign_interrupt_mode Found MSI capability [ 12.294239] Allocate Port Service[0000:00:1c.3:pcie00] [ 12.294267] Allocate Port Service[0000:00:1c.3:pcie02] [ 12.294503] isapnp: Scanning for PnP cards... [ 12.651714] isapnp: No Plug & Play device found [ 12.675475] Real Time Clock Driver v1.12ac [ 12.675570] hpet_resources: 0xfed00000 is busy [ 12.675613] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 12.676709] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 12.676777] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 12.676863] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 12.685404] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 12.685409] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 12.703489] mice: PS/2 mouse device common for all mice [ 12.703587] EISA: Probing bus 0 at eisa.0 [ 12.703594] Cannot allocate resource for EISA slot 1 [ 12.703596] Cannot allocate resource for EISA slot 2 [ 12.703598] Cannot allocate resource for EISA slot 3 [ 12.703600] Cannot allocate resource for EISA slot 4 [ 12.703601] Cannot allocate resource for EISA slot 5 [ 12.703603] Cannot allocate resource for EISA slot 6 [ 12.703605] Cannot allocate resource for EISA slot 7 [ 12.703607] Cannot allocate resource for EISA slot 8 [ 12.703608] EISA: Detected 0 cards. [ 12.703611] cpuidle: using governor ladder [ 12.703613] cpuidle: using governor menu [ 12.703689] NET: Registered protocol family 1 [ 12.703715] Using IPI No-Shortcut mode [ 12.703744] registered taskstats version 1 [ 12.703845] Magic number: 0:151:996 [ 12.703850] hash matches device ttyd9 [ 12.703854] hash matches device ttyac [ 12.703930] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 12.703932] EDD information not available. [ 12.704106] Freeing unused kernel memory: 364k freed [ 12.708720] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 13.878025] fuse init (API version 7.9) [ 13.896910] ACPI: SSDT 7FEF1D36, 0282 (r1 PmRef Cpu0Ist 100 INTL 20050513) [ 13.897162] ACPI: SSDT 7FEF203D, 065A (r1 PmRef Cpu0Cst 100 INTL 20050513) [ 13.899805] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 13.899810] ACPI: Processor [CPU0] (supports 8 throttling states) [ 13.899998] ACPI: SSDT 7FEF1C6E, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) [ 13.900223] ACPI: SSDT 7FEF1FB8, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) [ 13.901913] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 13.901917] ACPI: Processor [CPU1] (supports 8 throttling states) [ 13.904136] ACPI: Thermal Zone [THM0] (73 C) [ 13.905484] ACPI: Thermal Zone [THM1] (69 C) [ 14.230105] usbcore: registered new interface driver usbfs [ 14.230125] usbcore: registered new interface driver hub [ 14.233769] usbcore: registered new device driver usb [ 14.245188] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 14.245192] Copyright (c) 1999-2006 Intel Corporation. [ 14.245330] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 14.245347] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 14.254131] USB Universal Host Controller Interface driver v3.0 [ 14.280900] SCSI subsystem initialized [ 14.286948] libata version 3.00 loaded. [ 14.303397] e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:41:a9:94:c2 [ 14.365182] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 14.365508] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 14.365520] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 14.365524] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 14.365823] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 14.365860] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 [ 14.365985] usb usb1: configuration #1 chosen from 1 choice [ 14.366009] hub 1-0:1.0: USB hub found [ 14.366014] hub 1-0:1.0: 2 ports detected [ 14.469705] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21 [ 14.469718] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 14.469723] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 14.469748] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 14.469778] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 [ 14.469871] usb usb2: configuration #1 chosen from 1 choice [ 14.469890] hub 2-0:1.0: USB hub found [ 14.469894] hub 2-0:1.0: 2 ports detected [ 14.573522] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22 [ 14.573534] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 14.573538] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 14.573558] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 14.573589] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840 [ 14.573686] usb usb3: configuration #1 chosen from 1 choice [ 14.573707] hub 3-0:1.0: USB hub found [ 14.573713] hub 3-0:1.0: 2 ports detected [ 14.645516] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23 [ 14.645527] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 14.645531] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 14.645550] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 14.645579] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 [ 14.645671] usb usb4: configuration #1 chosen from 1 choice [ 14.645691] hub 4-0:1.0: USB hub found [ 14.645695] hub 4-0:1.0: 2 ports detected [ 14.656316] usb 1-2: new low speed USB device using uhci_hcd and address 2 [ 14.672084] ahci 0000:00:1f.2: version 3.0 [ 14.672113] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 [ 14.672162] ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x1) don't match, using nr_ports [ 14.672165] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf [ 14.717424] usb 1-2: configuration #1 chosen from 1 choice [ 14.755184] Clocksource tsc unstable (delta = -245701298 ns) [ 14.784287] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 14.821980] usb 4-1: configuration #1 chosen from 1 choice [ 14.823441] usbcore: registered new interface driver hiddev [ 14.836282] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input2 [ 14.849441] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-2 [ 14.849461] usbcore: registered new interface driver usbhid [ 14.849465] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 14.964044] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode [ 14.964048] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 14.964054] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 14.964322] scsi0 : ahci [ 14.964516] scsi1 : ahci [ 14.964633] scsi2 : ahci [ 14.964751] scsi3 : ahci [ 14.964813] ata1: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 218 [ 14.964816] ata2: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404580 irq 218 [ 14.964819] ata3: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404600 irq 218 [ 14.964822] ata4: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404680 irq 218 [ 15.112126] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 15.113010] ata1.00: ATA-7: HTS721010G9SA00, MCZIC10V, max UDMA/100 [ 15.113012] ata1.00: 195371568 sectors, multi 16: LBA48 [ 15.114423] ata1.00: configured for UDMA/100 [ 15.186499] ata2: SATA link down (SStatus 0 SControl 0) [ 15.258981] ata3: SATA link down (SStatus 0 SControl 0) [ 15.331252] ata4: SATA link down (SStatus 0 SControl 0) [ 15.331135] scsi 0:0:0:0: Direct-Access ATA HTS721010G9SA00 MCZI PQ: 0 ANSI: 5 [ 15.332757] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23 [ 15.332771] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 15.332775] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 15.332802] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 15.336717] ehci_hcd 0000:00:1d.7: debug port 1 [ 15.336724] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 15.336730] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee404000 [ 15.340355] Driver 'sd' needs updating - please use bus_type methods [ 15.342794] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 15.342805] sd 0:0:0:0: [sda] Write Protect is off [ 15.342808] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.342822] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.342863] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 15.342871] sd 0:0:0:0: [sda] Write Protect is off [ 15.342873] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.342887] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.342890] sda:<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 15.347096] usb usb5: configuration #1 chosen from 1 choice [ 15.347118] hub 5-0:1.0: USB hub found [ 15.347123] hub 5-0:1.0: 8 ports detected [ 15.450948] ata_piix 0000:00:1f.1: version 2.12 [ 15.450966] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 [ 15.451005] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 15.451060] scsi4 : ata_piix [ 15.451099] scsi5 : ata_piix [ 15.451734] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14 [ 15.451737] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 [ 15.688368] sda1 sda2 sda3 sda4 [ 15.713330] sd 0:0:0:0: [sda] Attached SCSI disk [ 15.717006] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.770483] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4083N, 1.08, max UDMA/33 [ 15.840857] Attempting manual resume [ 15.840860] swsusp: Resume From Partition 8:2 [ 15.840862] PM: Checking swsusp image. [ 15.841058] PM: Resume from disk failed. [ 15.841416] usb 1-2: USB disconnect, address 2 [ 15.882631] kjournald starting. Commit interval 5 seconds [ 15.882366] EXT3-fs: mounted filesystem with ordered data mode. [ 15.910661] ata5.00: configured for UDMA/33 [ 15.910738] ata6: port disabled. ignoring. [ 15.914709] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4083N 1.08 PQ: 0 ANSI: 5 [ 15.914772] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 16.105214] usb 1-2: new low speed USB device using uhci_hcd and address 3 [ 16.280033] usb 1-2: configuration #1 chosen from 1 choice [ 16.296119] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input3 [ 16.304606] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-2 [ 16.304659] usb 4-1: USB disconnect, address 2 [ 16.543587] usb 4-1: new full speed USB device using uhci_hcd and address 3 [ 16.710817] usb 4-1: configuration #1 chosen from 1 choice [ 22.747466] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 23.623056] intel_rng: FWH not detected [ 23.639973] Non-volatile memory driver v1.2 [ 23.754875] Linux agpgart interface v0.102 [ 23.825766] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 23.859095] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.905622] irda_init() [ 23.905643] NET: Registered protocol family 23 [ 23.937651] input: Power Button (FF) as /devices/virtual/input/input5 [ 23.974660] ACPI: Power Button (FF) [PWRF] [ 23.974720] input: Lid Switch as /devices/virtual/input/input6 [ 24.005601] ACPI: Lid Switch [LID] [ 24.005651] input: Sleep Button (CM) as /devices/virtual/input/input7 [ 24.037524] thinkpad_acpi: ThinkPad ACPI Extras v0.17 [ 24.037526] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 24.037528] thinkpad_acpi: ThinkPad BIOS 79ETC6WW (2.06 ), EC 79HT50WW-1.07 [ 24.037530] thinkpad_acpi: Lenovo ThinkPad T60p [ 24.045452] ACPI: Sleep Button (CM) [SLPB] [ 24.045881] thinkpad_acpi: radio switch found; radios are enabled [ 24.050118] thinkpad_acpi: standard ACPI backlight interface available, not loading native one... [ 24.050728] input: ThinkPad Extra Buttons as /devices/virtual/input/input8 [ 24.111507] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input9 [ 24.135029] nsc-ircc 00:0a: activated [ 24.135033] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 24.135056] nsc-ircc, chip->init [ 24.135069] nsc-ircc, Found chip at base=0x164e [ 24.135111] nsc-ircc, driver loaded (Dag Brattli) [ 24.135319] IrDA: Registered device irda0 [ 24.135321] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 24.173099] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 24.233040] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012] [ 24.233067] Yenta: Using INTVAL to route CSC interrupts to PCI [ 24.233068] Yenta: Routing CardBus interrupts to PCI [ 24.233074] Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64 [ 24.285831] iTCO_vendor_support: vendor-support=0 [ 24.314130] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 24.465407] Yenta: ISA IRQ mask 0x0cf0, PCI irq 16 [ 24.465412] Socket status: 30000007 [ 24.465415] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfff [ 24.465418] cs: IO port probe 0xa000-0xdfff: clean. [ 24.466299] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff [ 24.466301] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff [ 24.476985] ACPI: AC Adapter [AC] (on-line) [ 24.577713] Driver 'sr' needs updating - please use bus_type methods [ 24.582601] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0 [ 24.582605] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 24.582760] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21 [ 24.582774] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 24.582797] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 24.594344] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 24.594349] Uniform CD-ROM driver Revision: 3.20 [ 24.594396] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 24.608839] ACPI: Battery Slot [BAT0] (battery present) [ 24.675117] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 24.697786] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes. [ 24.697818] [fglrx] ASYNCIO init succeed! [ 24.698669] [fglrx] PAT is enabled successfully! [ 24.698689] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0 [ 24.743203] Bluetooth: Core ver 2.11 [ 24.769435] NET: Registered protocol family 31 [ 24.769437] Bluetooth: HCI device and connection manager initialized [ 24.769442] Bluetooth: HCI socket layer initialized [ 24.816378] Bluetooth: HCI USB driver ver 2.9 [ 24.818331] usbcore: registered new interface driver hci_usb [ 24.911525] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [ 24.911531] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 24.952867] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10 [ 25.007836] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 25.007877] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 25.602690] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21 [ 25.602697] hda_intel: probe_mask set to 0x1 for device 17aa:2010 [ 25.602722] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 25.644923] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels [ 25.645716] wmaster0: Selected rate control algorithm 'iwl-3945-rs' [ 25.770864] udev: renamed network interface wmaster0 to eth2 [ 25.803314] cs: IO port probe 0x100-0x3af: clean. [ 25.805535] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 25.806479] cs: IO port probe 0x820-0x8ff: clean. [ 25.807240] cs: IO port probe 0xc00-0xcf7: clean. [ 25.808162] cs: IO port probe 0xa00-0xaff: clean. [ 27.047136] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 27.106806] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11 [ 32.698010] lp: driver loaded but no devices found [ 32.820765] Adding 4176892k swap on /dev/sda2. Priority:-1 extents:1 across:4176892k [ 33.326200] EXT3 FS on sda3, internal journal [ 319.123115] kjournald starting. Commit interval 5 seconds [ 319.123113] EXT3 FS on sda1, internal journal [ 319.123117] EXT3-fs: mounted filesystem with ordered data mode. [ 319.170151] kjournald starting. Commit interval 5 seconds [ 319.170170] EXT3 FS on sda4, internal journal [ 319.170173] EXT3-fs: mounted filesystem with ordered data mode. [ 319.953724] ip_tables: (C) 2000-2006 Netfilter Core Team [ 325.365877] ACPI: ACPI Dock Station Driver [ 325.367180] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay [ 325.367185] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler [ 325.367210] ACPI: Error installing bay notify handler [ 325.367214] ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added [ 328.036090] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 328.036096] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO [ 328.502928] ppdev: user-space parallel port driver [ 328.892374] audit(1206637448.798:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=8053 profile="/usr/sbin/cupsd" namespace="default" [ 328.985144] apm: BIOS not found. [ 329.337612] input: /usr/sbin/thinkpad-keys as /devices/virtual/input/input12 [ 331.295175] Bluetooth: L2CAP ver 2.9 [ 331.295182] Bluetooth: L2CAP socket layer initialized [ 331.390037] Bluetooth: RFCOMM socket layer initialized [ 331.390061] Bluetooth: RFCOMM TTY layer initialized [ 331.390065] Bluetooth: RFCOMM ver 1.8 [ 333.918363] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 335.340477] NET: Registered protocol family 17 [ 335.987130] [fglrx] Reserve Block - 0 offset = 0Xfffb000 length = 0X5000 [ 335.987137] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000 [ 335.987139] [fglrx] Reserve Block - 2 offset = 0Xffbb000 length = 0X40000 [ 336.052645] [fglrx] interrupt source 10000000 successfully enabled [ 336.052652] [fglrx] enable ID = 0x00000008 [ 336.052661] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000 [ 337.914513] NET: Registered protocol family 10 [ 337.914993] lo: Disabled Privacy Extensions [ 337.918386] ADDRCONF(NETDEV_UP): wlan0_rename: link is not ready [ 347.212596] eth0: no IPv6 routers present [ 358.470409] CPU0 attaching NULL sched-domain. [ 358.470418] CPU1 attaching NULL sched-domain. [ 358.483316] CPU0 attaching sched-domain: [ 358.483323] domain 0: span 03 [ 358.483325] groups: 01 02 [ 358.483330] CPU1 attaching sched-domain: [ 358.483332] domain 0: span 03 [ 358.483335] groups: 02 01 [ 380.229863] wlan0_rename: Initial auth_alg=0 [ 380.229873] wlan0_rename: authenticate with AP 00:30:bd:c3:c5:da [ 380.231450] wlan0_rename: RX authentication from 00:30:bd:c3:c5:da (alg=0 transaction=2 status=0) [ 380.231457] wlan0_rename: authenticated [ 380.231462] wlan0_rename: associate with AP 00:30:bd:c3:c5:da [ 380.233672] wlan0_rename: RX AssocResp from 00:30:bd:c3:c5:da (capab=0x11 status=18 aid=0) [ 380.233678] wlan0_rename: AP denied association (code=18) [ 380.299774] wlan0_rename: associate with AP 00:30:bd:c3:c5:da [ 380.302798] wlan0_rename: RX AssocResp from 00:30:bd:c3:c5:da (capab=0x11 status=18 aid=0) [ 380.302805] wlan0_rename: AP denied association (code=18) [ 380.372871] wlan0_rename: associate with AP 00:30:bd:c3:c5:da [ 380.375613] wlan0_rename: RX AssocResp from 00:30:bd:c3:c5:da (capab=0x11 status=18 aid=0) [ 380.375621] wlan0_rename: AP denied association (code=18) [ 380.433385] wlan0_rename: association with AP 00:30:bd:c3:c5:da timed out [ 387.005588] wlan0_rename: privacy configuration mismatch and mixed-cell disabled - disassociate [ 392.308146] wlan0_rename: privacy configuration mismatch and mixed-cell disabled - disassociate [ 397.157296] wlan0_rename: privacy configuration mismatch and mixed-cell disabled - disassociate [ 399.579923] wlan0_rename: privacy configuration mismatch and mixed-cell disabled - disassociate [ 401.892464] wlan0_rename: privacy configuration mismatch and mixed-cell disabled - disassociate [ 407.553406] wlan0_rename: privacy configuration mismatch and mixed-cell disabled - disassociate [ 414.860527] eth0: no IPv6 routers present [ 419.182397] ADDRCONF(NETDEV_UP): wlan0_rename: link is not ready