network-manager ask for wireless encryption key

Bug #145652 reported by Alexandre on 2007-09-27
4
Affects Status Importance Assigned to Milestone
linux-ubuntu-modules-2.6.22 (Ubuntu)
Undecided
Unassigned
network-manager (Ubuntu)
Low
Unassigned

Bug Description

I am using a bcm4318 wireless card on an acer 3002 lci laptop. the available networks are shown, and when I select one, system ask for encryption key but never connect. at the access point the status for my card is authorized.

dmesg

[ 0.000000] Linux version 2.6.22-12-generic (buildd@vernadsky) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23 18:11:30 GMT 2007 (Ubuntu 2.6.22-12.39-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
[ 0.000000] BIOS-e820: 000000001bef0000 - 000000001befa000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001befa000 - 000000001bf00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bf00000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 446MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7fd0
[ 0.000000] Entering add_active_range(0, 0, 114416) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114416
[ 0.000000] HighMem 114416 -> 114416
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114416
[ 0.000000] On node 0 totalpages: 114416
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 861 pages used for memmap
[ 0.000000] Normal zone: 109459 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F7F60, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 1BEF61D6, 0034 (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 1BEF9E5F, 0074 (r1 SiS 755F 6040000 PTL F4240)
[ 0.000000] ACPI: DSDT 1BEF620A, 3C55 (r1 PTLTD 755 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 1BEFAFC0, 0040
[ 0.000000] ACPI: SSDT 1BEF9ED3, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ACPI: APIC 1BEF9F88, 0050 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 1BEF9FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000)
[ 0.000000] Built 1 zonelists. Total pages: 113523
[ 0.000000] Kernel command line: root=UUID=ee194b66-5ddb-408c-81bc-f0e0aed6bee6 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1600.168 MHz processor.
[ 17.286417] Console: colour VGA+ 80x25
[ 17.286647] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 17.286930] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 17.296992] Memory: 442124k/457664k available (2017k kernel code, 14924k reserved, 918k data, 364k init, 0k highmem)
[ 17.297004] virtual kernel memory layout:
[ 17.297005] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 17.297007] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 17.297009] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 17.297010] lowmem : 0xc0000000 - 0xdbef0000 ( 446 MB)
[ 17.297012] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 17.297013] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB)
[ 17.297015] .text : 0xc0100000 - 0xc02f8456 (2017 kB)
[ 17.297018] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 17.297057] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 17.376958] Calibrating delay using timer specific routine.. 3201.83 BogoMIPS (lpj=6403664)
[ 17.376985] Security Framework v1.0.0 initialized
[ 17.376991] SELinux: Disabled at boot.
[ 17.377006] Mount-cache hash table entries: 512
[ 17.377126] CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000000 00000000 00000001
[ 17.377136] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 17.377139] CPU: L2 Cache: 256K (64 bytes/line)
[ 17.377142] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000000 00000000 00000001
[ 17.377152] Compat vDSO mapped to ffffe000.
[ 17.377163] Checking 'hlt' instruction... OK.
[ 17.393067] SMP alternatives: switching to UP code
[ 17.393260] Freeing SMP alternatives: 11k freed
[ 17.393609] Early unpacking initramfs... done
[ 17.751661] ACPI: Core revision 20070126
[ 17.751735] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 17.755233] CPU0: AMD Mobile AMD Sempron(tm) Processor 2800+ stepping 00
[ 17.755253] Total of 1 processors activated (3201.83 BogoMIPS).
[ 17.755409] ENABLING IO-APIC IRQs
[ 17.755608] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 17.900247] Brought up 1 CPUs
[ 17.900381] Booting paravirtualized kernel on bare hardware
[ 17.900446] Time: 11:13:57 Date: 08/27/107
[ 17.900473] NET: Registered protocol family 16
[ 17.900563] EISA bus registered
[ 17.900575] ACPI: bus type pci registered
[ 17.900690] PCI: PCI BIOS revision 2.10 entry at 0xfd776, last bus=1
[ 17.900693] PCI: Using configuration type 1
[ 17.900695] Setting up standard PCI resources
[ 17.902269] ACPI: EC: Look up EC in DSDT
[ 17.902378] ACPI: EC: GPE=0x19, ports=0x66, 0x62
[ 17.917075] ACPI: Interpreter enabled
[ 17.917078] ACPI: (supports S0 S3 S4 S5)
[ 17.917090] ACPI: Using IOAPIC for interrupt routing
[ 17.919747] ACPI: EC: GPE=0x19, ports=0x66, 0x62
[ 17.919789] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.919796] PCI: Probing PCI hardware (bus 00)
[ 17.919911] Enabling SiS 96x SMBus.
[ 17.920355] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.927027] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11)
[ 17.927120] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11)
[ 17.927207] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11)
[ 17.927292] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11)
[ 17.927391] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
[ 17.927477] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
[ 17.927559] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[ 17.927642] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11)
[ 17.927732] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.927747] pnp: PnP ACPI init
[ 17.927757] ACPI: bus type pnp registered
[ 17.929366] pnp: PnP ACPI: found 8 devices
[ 17.929368] ACPI: ACPI bus type pnp unregistered
[ 17.929373] PnPBIOS: Disabled by ACPI PNP
[ 17.929428] PCI: Using ACPI for IRQ routing
[ 17.929432] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 17.931481] NET: Registered protocol family 8
[ 17.931483] NET: Registered protocol family 20
[ 17.931551] pnp: 00:04: ioport range 0x8000-0x807f has been reserved
[ 17.931554] pnp: 00:04: ioport range 0x8080-0x80ff has been reserved
[ 17.931558] pnp: 00:04: ioport range 0x8100-0x811f has been reserved
[ 17.931561] pnp: 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 17.931565] pnp: 00:04: iomem range 0xfec00000-0xfecfffff has been reserved
[ 17.931568] pnp: 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 17.931572] pnp: 00:04: iomem range 0xfee00000-0xfeefffff has been reserved
[ 17.931576] pnp: 00:04: iomem range 0xffc00000-0xffc00fff has been reserved
[ 17.932163] Time: tsc clocksource has been installed.
[ 17.961821] PCI: Bridge: 0000:00:01.0
[ 17.961824] IO window: a000-afff
[ 17.961828] MEM window: e2100000-e21fffff
[ 17.961832] PREFETCH window: e8000000-efffffff
[ 17.961836] PCI: Bus 2, cardbus bridge: 0000:00:06.0
[ 17.961839] IO window: 00002400-000024ff
[ 17.961842] IO window: 00002800-000028ff
[ 17.961846] PREFETCH window: 30000000-33ffffff
[ 17.961850] MEM window: 34000000-37ffffff
[ 17.961865] PCI: Enabling device 0000:00:06.0 (0000 -> 0003)
[ 17.961877] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 17.961896] NET: Registered protocol family 2
[ 18.000107] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 18.000168] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[ 18.000379] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 18.000545] TCP: Hash tables configured (established 16384 bind 16384)
[ 18.000548] TCP reno registered
[ 18.012195] checking if image is initramfs... it is
[ 18.463392] Switched to high resolution mode on CPU 0
[ 18.719602] Freeing initrd memory: 7061k freed
[ 18.719742] Simple Boot Flag at 0x38 set to 0x1
[ 18.720077] audit: initializing netlink socket (disabled)
[ 18.720092] audit(1190891637.032:1): initialized
[ 18.721869] VFS: Disk quotas dquot_6.5.1
[ 18.721926] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 18.722031] io scheduler noop registered
[ 18.722034] io scheduler anticipatory registered
[ 18.722036] io scheduler deadline registered
[ 18.722051] io scheduler cfq registered (default)
[ 19.140602] Boot video device is 0000:01:00.0
[ 19.140796] isapnp: Scanning for PnP cards...
[ 19.493648] isapnp: No Plug & Play device found
[ 19.517428] Real Time Clock Driver v1.12ac
[ 19.517514] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 19.518155] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 17
[ 19.518162] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[ 19.518690] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 19.518910] input: Macintosh mouse button emulation as /class/input/input0
[ 19.518980] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 19.521669] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 19.521675] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 19.521862] mice: PS/2 mouse device common for all mice
[ 19.521971] EISA: Probing bus 0 at eisa.0
[ 19.521979] Cannot allocate resource for EISA slot 1
[ 19.521982] Cannot allocate resource for EISA slot 2
[ 19.522002] Cannot allocate resource for EISA slot 8
[ 19.522004] EISA: Detected 0 cards.
[ 19.522112] TCP cubic registered
[ 19.522127] NET: Registered protocol family 1
[ 19.522153] Using IPI No-Shortcut mode
[ 19.522316] Magic number: 7:381:227
[ 19.522375] hash matches device ttyre
[ 19.522481] hash matches device PNP0200:00
[ 19.522817] Freeing unused kernel memory: 364k freed
[ 19.565745] input: AT Translated Set 2 keyboard as /class/input/input1
[ 20.738234] AppArmor: AppArmor initialized<5>audit(1190891639.032:2): type=1505 info="AppArmor initialized" pid=1177
[ 20.746807] fuse init (API version 7.8)
[ 20.752831] Failure registering capabilities with primary security module.
[ 20.772414] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 20.772421] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 20.775701] ACPI: Thermal Zone [THRM] (57 C)
[ 21.337542] SCSI subsystem initialized
[ 21.342476] libata version 2.21 loaded.
[ 21.346174] pata_sis 0000:00:02.5: version 0.5.1
[ 21.346207] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 18
[ 21.346327] scsi0 : pata_sis
[ 21.346377] scsi1 : pata_sis
[ 21.346453] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00012000 irq 14
[ 21.346457] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00012008 irq 15
[ 21.397056] usbcore: registered new interface driver usbfs
[ 21.397084] usbcore: registered new interface driver hub
[ 21.397106] usbcore: registered new device driver usb
[ 21.438915] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 21.442061] sis900.c: v1.08.10 Apr. 2 2006
[ 4.264000] Marking TSC unstable due to: possible TSC halt in C2.
[ 4.268000] Time: acpi_pm clocksource has been installed.
[ 4.336000] ata1.00: ATA-7: SAMSUNG MP0402H, UC100-14, max UDMA/100
[ 4.336000] ata1.00: 78242976 sectors, multi 16: LBA48
[ 4.344000] ata1.00: configured for UDMA/100
[ 4.820000] ata2.00: ATAPI: UJDA760 DVD/CDRW, 1.00, max UDMA/33
[ 4.992000] ata2.00: configured for UDMA/33
[ 4.992000] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0402H UC10 PQ: 0 ANSI: 5
[ 4.992000] scsi 1:0:0:0: CD-ROM MATSHITA UJDA760 DVD/CDRW 1.00 PQ: 0 ANSI: 5
[ 4.992000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 4.992000] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 4.992000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 4.992000] ohci_hcd 0000:00:03.0: irq 19, io mem 0xe2002000
[ 5.008000] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[ 5.008000] sd 0:0:0:0: [sda] Write Protect is off
[ 5.008000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.008000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.008000] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[ 5.008000] sd 0:0:0:0: [sda] Write Protect is off
[ 5.008000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.008000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.008000] sda:<6>usb usb1: configuration #1 chosen from 1 choice
[ 5.048000] hub 1-0:1.0: USB hub found
[ 5.048000] hub 1-0:1.0: 3 ports detected
[ 5.152000] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 5.152000] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 5.152000] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[ 5.152000] ohci_hcd 0000:00:03.1: irq 20, io mem 0xe2003000
[ 5.208000] usb usb2: configuration #1 chosen from 1 choice
[ 5.208000] hub 2-0:1.0: USB hub found
[ 5.208000] hub 2-0:1.0: 3 ports detected
[ 5.312000] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 5.316000] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13.
[ 5.320000] 0000:00:04.0: Using transceiver found at address 13 as default
[ 5.324000] eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 16, 00:c0:9f:73:d7:dc.
[ 5.324000] ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 21
[ 5.324000] ehci_hcd 0000:00:03.2: EHCI Host Controller
[ 5.324000] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[ 5.324000] PCI: cache line size of 64 is not supported by device 0000:00:03.2
[ 5.324000] ehci_hcd 0000:00:03.2: irq 21, io mem 0xe2004000
[ 5.324000] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.324000] usb usb3: configuration #1 chosen from 1 choice
[ 5.324000] hub 3-0:1.0: USB hub found
[ 5.324000] hub 3-0:1.0: 6 ports detected
[ 6.000000] usb 1-2: new low speed USB device using ohci_hcd and address 3
[ 6.184000] sda1 sda2 sda3 sda4
[ 6.204000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.208000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.212000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.212000] usb 1-2: configuration #1 chosen from 1 choice
[ 6.224000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 6.224000] Uniform CD-ROM driver Revision: 3.20
[ 6.224000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.252000] usbcore: registered new interface driver hiddev
[ 6.260000] input: PS/2+USB Mouse as /class/input/input2
[ 6.260000] input: USB HID v1.10 Mouse [PS/2+USB Mouse] on usb-0000:00:03.0-2
[ 6.260000] usbcore: registered new interface driver usbhid
[ 6.260000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 6.596000] Attempting manual resume
[ 6.596000] swsusp: Resume From Partition 8:2
[ 6.596000] PM: Checking swsusp image.
[ 6.596000] PM: Resume from disk failed.
[ 6.636000] kjournald starting. Commit interval 5 seconds
[ 6.636000] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.712000] Linux agpgart interface v0.102 (c) Dave Jones
[ 18.772000] agpgart: Detected SiS chipset - id:1888
[ 18.772000] agpgart: AGP aperture is 4M @ 0xe0000000
[ 19.000000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 19.004000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.036000] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
[ 19.172000] Yenta: CardBus bridge found at 0000:00:06.0 [1025:0083]
[ 19.172000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 19.172000] Yenta: Routing CardBus interrupts to PCI
[ 19.172000] Yenta TI: socket 0000:00:06.0, mfunc 0x00521d22, devctl 0x64
[ 19.408000] Yenta: ISA IRQ mask 0x06f8, PCI irq 16
[ 19.408000] Socket status: 30000006
[ 19.552000] ieee80211_crypt: registered algorithm 'NULL'
[ 19.648000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 19.648000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 19.708000] input: PC Speaker as /class/input/input3
[ 19.852000] bcm43xx driver
[ 19.852000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 22
[ 20.164000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 17
[ 20.288000] cs: IO port probe 0x100-0x3af: clean.
[ 20.292000] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
[ 20.292000] cs: IO port probe 0x820-0x8ff: clean.
[ 20.292000] cs: IO port probe 0xc00-0xcf7: clean.
[ 20.292000] cs: IO port probe 0xa00-0xaff: clean.
[ 20.456000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
[ 20.492000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 20.992000] intel8x0_measure_ac97_clock: measured 55428 usecs
[ 20.992000] intel8x0: clocking to 48000
[ 22.172000] lp: driver loaded but no devices found
[ 22.244000] Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k
[ 22.732000] EXT3 FS on sda3, internal journal
[ 23.456000] kjournald starting. Commit interval 5 seconds
[ 23.456000] EXT3 FS on sda4, internal journal
[ 23.456000] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.588000] ACPI: Battery Slot [BAT1] (battery present)
[ 24.824000] ACPI: AC Adapter [ACAD] (on-line)
[ 24.840000] No dock devices found.
[ 25.028000] input: Power Button (FF) as /class/input/input5
[ 25.036000] ACPI: Power Button (FF) [PWRF]
[ 25.076000] input: Lid Switch as /class/input/input6
[ 25.080000] ACPI: Lid Switch [LID]
[ 25.120000] input: Power Button (CM) as /class/input/input7
[ 25.124000] ACPI: Power Button (CM) [PWRB]
[ 25.160000] input: Sleep Button (CM) as /class/input/input8
[ 25.168000] ACPI: Sleep Button (CM) [SLPB]
[ 25.448000] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2800+ processors (version 2.00.00)
[ 25.448000] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x8
[ 25.448000] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x13
[ 26.896000] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 17
[ 27.480000] eth0: Media Link Off
[ 27.776000] ppdev: user-space parallel port driver
[ 29.004000] audit(1190902465.726:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4724 profile="/usr/sbin/cupsd"
[ 29.164000] apm: BIOS not found.
[ 29.436000] Failure registering capabilities with primary security module.
[ 31.060000] Clocksource tsc unstable (delta = -192011206 ns)
[ 52.188000] NET: Registered protocol family 10
[ 52.188000] lo: Disabled Privacy Extensions
[ 52.188000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 52.188000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 135.408000] NET: Registered protocol family 17
[ 135.900000] ieee80211_crypt: registered algorithm 'WEP'
[ 136.024000] SoftMAC: Open Authentication completed with 00:15:e9:2a:a8:56
[ 136.068000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 146.140000] eth1: no IPv6 routers present
[ 218.480000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 222.816000] NETDEV WATCHDOG: eth0: transmit timed out
[ 222.816000] eth0: Transmit timeout, status 00000004 00000000
[ 223.480000] eth0: Media Link On 100mbps full-duplex
[ 228.636000] eth0: no IPv6 routers present
[ 247.808000] eth0: no IPv6 routers present
[ 361.308000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 1061.804000] APIC error on CPU0: 00(40)

Stuart Read (sread) wrote :

I have the same problem with a Dell Latitude D600, bcm4306 card. After fixing the problem in bug 197819 (https://bugs.launchpad.net/ubuntu/+source/b43-fwcutter/+bug/197819) the wireless allowed me to connect to my network, but after providing the network key it just hangs. I have attached a section of my daemon.log, which seems to contain relevant information.

Stuart Read (sread) wrote :

Problem solved using debdiff in Bug #204868.

Steve Langasek (vorlon) wrote :

the original issue reported has nothing to do with bug #204868; unmarking as a duplicate.

Basilio Kublik (sourcercito) wrote :

Hi there
Is this still present in an up-to-date Hardy Heron system?, could you please check and comment back.

Thanks in advance

Changed in network-manager:
importance: Undecided → Low
status: New → Incomplete
Alexandre (lexrupy) wrote :

At the moment I don't have my old Acer laptop, but I can say that behavior was not present in ubuntu hardy beta, and still no present in my new Acer Laptop.

the new one have an (atheros) AR5007 card, and is still not recognized correctly, I also need to compile madwifi by myself to get it working....

Alexander Sack (asac) on 2008-11-03
Changed in network-manager:
status: Incomplete → Invalid
Changed in linux-ubuntu-modules-2.6.22:
status: New → Invalid
To post a comment you must log in.
This report contains Public information  Edit
Everyone can see this information.

Other bug subscribers

Bug attachments