[ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] Command line: root=UUID=d218b4c5-8493-414a-a1d7-e3b309b325e5 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable) [ 0.000000] BIOS-e820: 00000000bf6b0000 - 00000000bf6cc000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf6cc000 - 00000000bf700000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 784048) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1310720 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F69D0 checksum 0 [ 0.000000] ACPI: RSDP 000F69D0, 0024 (r2 LENOVO) [ 0.000000] ACPI: XSDT BF6BCAEC, 008C (r1 LENOVO TP-7O 1030 LTP 0) [ 0.000000] ACPI: FACP BF6BCC00, 00F4 (r3 LENOVO TP-7O 1030 LNVO 1) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT BF6BD00C, EBEF (r1 LENOVO TP-7O 1030 MSFT 3000000) [ 0.000000] ACPI: FACS BF6E4000, 0040 [ 0.000000] ACPI: SSDT BF6BCDB4, 0258 (r1 LENOVO TP-7O 1030 MSFT 3000000) [ 0.000000] ACPI: ECDT BF6CBBFB, 0052 (r1 LENOVO TP-7O 1030 LNVO 1) [ 0.000000] ACPI: TCPA BF6CBC4D, 0032 (r2 LENOVO TP-7O 1030 LNVO 1) [ 0.000000] ACPI: APIC BF6CBC7F, 0068 (r1 LENOVO TP-7O 1030 LNVO 1) [ 0.000000] ACPI: MCFG BF6CBCE7, 003C (r1 LENOVO TP-7O 1030 LNVO 1) [ 0.000000] ACPI: HPET BF6CBD23, 0038 (r1 LENOVO TP-7O 1030 LNVO 1) [ 0.000000] ACPI: SLIC BF6CBE62, 0176 (r1 LENOVO TP-7O 1030 LTP 0) [ 0.000000] ACPI: BOOT BF6CBFD8, 0028 (r1 LENOVO TP-7O 1030 LTP 1) [ 0.000000] ACPI: SSDT BF6E26D9, 025F (r1 LENOVO TP-7O 1030 INTL 20050513) [ 0.000000] ACPI: SSDT BF6E2938, 00A6 (r1 LENOVO TP-7O 1030 INTL 20050513) [ 0.000000] ACPI: SSDT BF6E29DE, 04F7 (r1 LENOVO TP-7O 1030 INTL 20050513) [ 0.000000] ACPI: SSDT BF6E2ED5, 01D8 (r1 LENOVO TP-7O 1030 INTL 20050513) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 784048) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1310720 [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 157 [ 0.000000] 0: 256 -> 784048 [ 0.000000] 0: 1048576 -> 1310720 [ 0.000000] On node 0 totalpages: 1046093 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1127 pages reserved [ 0.000000] DMA zone: 2814 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765672 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000bf6b0000 - 00000000bf6cc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000bf6cc000 - 00000000bf700000 [ 0.000000] swsusp: Registered nosave memory region: 00000000bf700000 - 00000000c0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000c0000000 - 00000000f0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f0000000 - 00000000f4000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f4000000 - 00000000fec00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec10000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec10000 - 00000000fed00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fed14000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed14000 - 00000000fed1a000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed1c000 - 00000000fed90000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed90000 - 00000000fee00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ff000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:30000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 1027046 [ 0.000000] Kernel command line: root=UUID=d218b4c5-8493-414a-a1d7-e3b309b325e5 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 11.799589] time.c: Detected 2194.497 MHz processor. [ 11.800994] Console: colour VGA+ 80x25 [ 11.801013] Checking aperture... [ 11.801029] Calgary: detecting Calgary via BIOS EBDA area [ 11.801031] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 11.801032] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 11.840182] Placing software IO TLB between 0x103d000 - 0x503d000 [ 11.877323] Memory: 4034764k/5242880k available (2274k kernel code, 149608k reserved, 1181k data, 296k init) [ 11.877361] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 11.953814] Calibrating delay using timer specific routine.. 4394.67 BogoMIPS (lpj=8789346) [ 11.953842] Security Framework v1.0.0 initialized [ 11.953848] SELinux: Disabled at boot. [ 11.954134] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 11.956605] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 11.957717] Mount-cache hash table entries: 256 [ 11.957867] CPU: L1 I cache: 32K, L1 D cache: 32K [ 11.957870] CPU: L2 cache: 4096K [ 11.957872] CPU 0/0 -> Node 0 [ 11.957874] using mwait in idle threads. [ 11.957875] CPU: Physical Processor ID: 0 [ 11.957876] CPU: Processor Core ID: 0 [ 11.957882] CPU0: Thermal monitoring enabled (TM2) [ 11.957891] SMP alternatives: switching to UP code [ 11.958115] Early unpacking initramfs... done [ 12.235795] ACPI: Core revision 20070126 [ 12.235856] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 12.296886] Using local APIC timer interrupts. [ 12.342396] result 12468735 [ 12.342398] Detected 12.468 MHz APIC timer. [ 12.345336] SMP alternatives: switching to SMP code [ 12.345411] Booting processor 1/2 APIC 0x1 [ 12.356102] Initializing CPU#1 [ 12.433386] Calibrating delay using timer specific routine.. 4389.16 BogoMIPS (lpj=8778325) [ 12.433393] CPU: L1 I cache: 32K, L1 D cache: 32K [ 12.433395] CPU: L2 cache: 4096K [ 12.433397] CPU 1/1 -> Node 0 [ 12.433398] CPU: Physical Processor ID: 0 [ 12.433399] CPU: Processor Core ID: 1 [ 12.433404] CPU1: Thermal monitoring enabled (TM2) [ 12.433857] Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 12.437177] Brought up 2 CPUs [ 12.597953] migration_cost=12 [ 12.597897] NET: Registered protocol family 16 [ 12.597965] ACPI: bus type pci registered [ 12.597974] PCI: Using configuration type 1 [ 12.599319] ACPI: EC: Found ECDT [ 12.678670] ACPI: Interpreter enabled [ 12.678672] ACPI: (supports S0 S3 S4 S5) [ 12.678688] ACPI: Using IOAPIC for interrupt routing [ 12.686647] ACPI: EC: GPE=0x12, ports=0x66, 0x62 [ 12.686686] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 12.686691] PCI: Probing PCI hardware (bus 00) [ 12.690396] PCI: Transparent bridge - 0000:00:1e.0 [ 12.690577] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 12.690752] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 12.690870] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 12.690988] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 12.691105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 12.691225] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 12.691344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 12.694715] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) [ 12.694915] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 12.695113] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 12.695310] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 12.695507] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 12.695704] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 12.695901] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 12.696097] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 12.696603] ACPI: Power Resource [PUBS] (on) [ 12.696619] Linux Plug and Play Support v0.97 (c) Adam Belay [ 12.696627] pnp: PnP ACPI init [ 12.696636] ACPI: bus type pnp registered [ 12.700549] pnp: PnP ACPI: found 11 devices [ 12.700551] ACPI: ACPI bus type pnp unregistered [ 12.700592] PCI: Using ACPI for IRQ routing [ 12.700594] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 12.700923] NET: Registered protocol family 8 [ 12.700924] NET: Registered protocol family 20 [ 12.700936] PCI-GART: No AMD northbridge found. [ 12.700944] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 12.700947] hpet0: 3 64-bit timers, 14318180 Hz [ 12.701985] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 12.701987] pnp: 00:00: iomem range 0xc0000-0xc3fff has been reserved [ 12.701989] pnp: 00:00: iomem range 0xc4000-0xc7fff has been reserved [ 12.701994] pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 12.701999] pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 12.702002] pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 12.702004] pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved [ 12.702007] pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved [ 12.702270] PCI: Bridge: 0000:00:1c.0 [ 12.702275] IO window: 2000-2fff [ 12.702283] MEM window: fc000000-fdffffff [ 12.702289] PREFETCH window: f8000000-f80fffff [ 12.702297] PCI: Bridge: 0000:00:1c.1 [ 12.702301] IO window: 3000-3fff [ 12.702313] MEM window: dc100000-df6fffff [ 12.702320] PREFETCH window: dfe00000-dfefffff [ 12.702327] PCI: Bridge: 0000:00:1c.2 [ 12.702328] IO window: disabled. [ 12.702338] MEM window: fe000000-fe0fffff [ 12.702344] PREFETCH window: disabled. [ 12.702354] PCI: Bridge: 0000:00:1c.3 [ 12.702359] IO window: 4000-4fff [ 12.702371] MEM window: d8000000-d9ffffff [ 12.702377] PREFETCH window: dfb00000-dfbfffff [ 12.702384] PCI: Bridge: 0000:00:1c.4 [ 12.702389] IO window: 5000-5fff [ 12.702399] MEM window: d4000000-d5ffffff [ 12.702405] PREFETCH window: df800000-df8fffff [ 12.702415] PCI: Bus 22, cardbus bridge: 0000:15:00.0 [ 12.702417] IO window: 00006000-000060ff [ 12.702424] IO window: 00006400-000064ff [ 12.702431] PREFETCH window: f4000000-f7ffffff [ 12.702440] MEM window: c4000000-c7ffffff [ 12.702447] PCI: Bridge: 0000:00:1e.0 [ 12.702452] IO window: 6000-9fff [ 12.702460] MEM window: f8300000-fbffffff [ 12.702466] PREFETCH window: f4000000-f7ffffff [ 12.702500] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 12.702506] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 12.702532] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 12.702537] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 12.702562] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 12.702567] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 12.702595] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23 [ 12.702600] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 12.702626] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 20 [ 12.702633] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 12.702655] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) [ 12.702662] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 12.702689] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 12.702697] PCI: Setting latency timer of device 0000:15:00.0 to 64 [ 12.702709] NET: Registered protocol family 2 [ 12.704814] Time: hpet clocksource has been installed. [ 12.736858] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 12.738005] TCP established hash table entries: 524288 (order: 11, 12582912 bytes) [ 12.744343] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 12.744959] TCP: Hash tables configured (established 524288 bind 65536) [ 12.744961] TCP reno registered [ 12.756875] checking if image is initramfs... it is [ 13.351492] Freeing initrd memory: 7201k freed [ 13.354498] Simple Boot Flag at 0x35 set to 0x1 [ 13.355217] audit: initializing netlink socket (disabled) [ 13.355234] audit(1197653655.440:1): initialized [ 13.357088] VFS: Disk quotas dquot_6.5.1 [ 13.357132] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 13.357210] io scheduler noop registered [ 13.357212] io scheduler anticipatory registered [ 13.357214] io scheduler deadline registered [ 13.357291] io scheduler cfq registered (default) [ 13.357307] Boot video device is 0000:00:02.0 [ 13.361071] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 13.361145] assign_interrupt_mode Found MSI capability [ 13.361148] Allocate Port Service[0000:00:1c.0:pcie00] [ 13.361181] Allocate Port Service[0000:00:1c.0:pcie02] [ 13.361295] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 13.361353] assign_interrupt_mode Found MSI capability [ 13.361355] Allocate Port Service[0000:00:1c.1:pcie00] [ 13.361381] Allocate Port Service[0000:00:1c.1:pcie02] [ 13.361504] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 13.361564] assign_interrupt_mode Found MSI capability [ 13.361566] Allocate Port Service[0000:00:1c.2:pcie00] [ 13.361591] Allocate Port Service[0000:00:1c.2:pcie02] [ 13.361709] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 13.361778] assign_interrupt_mode Found MSI capability [ 13.361780] Allocate Port Service[0000:00:1c.3:pcie00] [ 13.361805] Allocate Port Service[0000:00:1c.3:pcie02] [ 13.361926] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 13.361985] assign_interrupt_mode Found MSI capability [ 13.361987] Allocate Port Service[0000:00:1c.4:pcie00] [ 13.362017] Allocate Port Service[0000:00:1c.4:pcie02] [ 13.379861] Real Time Clock Driver v1.12ac [ 13.379940] hpet_resources: 0xfed00000 is busy [ 13.379979] Linux agpgart interface v0.102 (c) Dave Jones [ 13.379981] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 13.380852] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 13.380960] input: Macintosh mouse button emulation as /class/input/input0 [ 13.381027] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 13.390487] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 13.390490] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 13.390594] mice: PS/2 mouse device common for all mice [ 13.390695] TCP cubic registered [ 13.390737] NET: Registered protocol family 1 [ 13.390928] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 13.390934] Freeing unused kernel memory: 296k freed [ 13.395932] input: AT Translated Set 2 keyboard as /class/input/input1 [ 14.531663] AppArmor: AppArmor initialized<5>audit(1197653656.620:2): type=1505 info="AppArmor initialized" pid=1258 [ 14.535260] fuse init (API version 7.8) [ 14.538920] Failure registering capabilities with primary security module. [ 14.576012] ACPI: SSDT BF6E1D72, 02C4 (r1 PmRef Cpu0Ist 100 INTL 20050513) [ 14.576261] ACPI: SSDT BF6E20BB, 061E (r1 PmRef Cpu0Cst 100 INTL 20050513) [ 14.577059] Monitor-Mwait will be used to enter C-1 state [ 14.577062] Monitor-Mwait will be used to enter C-2 state [ 14.577064] Monitor-Mwait will be used to enter C-3 state [ 14.577067] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 14.577071] ACPI: Processor [CPU0] (supports 8 throttling states) [ 14.577265] ACPI: SSDT BF6E1CAA, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) [ 14.577495] ACPI: SSDT BF6E2036, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) [ 14.578732] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 14.578736] ACPI: Processor [CPU1] (supports 8 throttling states) [ 14.580465] ACPI: Thermal Zone [THM0] (43 C) [ 14.581945] ACPI: Thermal Zone [THM1] (37 C) [ 14.868099] usbcore: registered new interface driver usbfs [ 14.868124] usbcore: registered new interface driver hub [ 14.868145] usbcore: registered new device driver usb [ 14.873024] USB Universal Host Controller Interface driver v3.0 [ 14.881496] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 [ 14.882616] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 14.882623] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 14.882748] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 14.882807] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 14.882819] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe304800 [ 14.887129] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 14.887218] usb usb1: configuration #1 chosen from 1 choice [ 14.887239] hub 1-0:1.0: USB hub found [ 14.887244] hub 1-0:1.0: 4 ports detected [ 14.918460] SCSI subsystem initialized [ 14.921793] libata version 2.21 loaded. [ 14.974861] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 14.974876] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 14.974882] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 14.974992] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 14.975032] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 14.975309] usb usb2: configuration #1 chosen from 1 choice [ 14.975423] hub 2-0:1.0: USB hub found [ 14.975429] hub 2-0:1.0: 2 ports detected [ 14.985368] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 14.985378] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 14.985383] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 14.985496] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 [ 14.985531] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 14.985794] usb usb3: configuration #1 chosen from 1 choice [ 14.985905] hub 3-0:1.0: USB hub found [ 14.985910] hub 3-0:1.0: 2 ports detected [ 14.989072] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 14.989081] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 14.989085] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 14.989209] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 14.989244] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001860 [ 14.989524] usb usb4: configuration #1 chosen from 1 choice [ 14.989649] hub 4-0:1.0: USB hub found [ 14.989654] hub 4-0:1.0: 2 ports detected [ 14.992699] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 14.992710] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 14.992714] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 14.992852] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 14.992886] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880 [ 14.993194] usb usb5: configuration #1 chosen from 1 choice [ 14.993330] hub 5-0:1.0: USB hub found [ 14.993335] hub 5-0:1.0: 2 ports detected [ 14.996572] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 14.996582] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 14.996590] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 14.996745] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 14.996777] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 14.997118] usb usb6: configuration #1 chosen from 1 choice [ 14.997271] hub 6-0:1.0: USB hub found [ 14.997276] hub 6-0:1.0: 2 ports detected [ 15.000752] tg3.c:v3.77 (May 31, 2007) [ 15.000833] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 15.000851] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 15.038245] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 15.046707] usb 2-1: configuration #1 chosen from 1 choice [ 15.068661] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 15.076694] usb 2-2: configuration #1 chosen from 1 choice [ 15.086965] eth0: Tigon3 [partno(none) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:58:cc:2d:6d [ 15.086970] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 15.086972] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 15.087051] ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 15.087063] PCI: Setting latency timer of device 0000:15:00.1 to 64 [ 15.140247] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8301000-f83017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 15.144852] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 [ 15.145746] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 15.145753] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 15.145800] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 15.145852] ehci_hcd 0000:00:1d.7: debug port 1 [ 15.145864] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 15.145877] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe304c00 [ 15.150226] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 15.150331] usb usb7: configuration #1 chosen from 1 choice [ 15.150352] hub 7-0:1.0: USB hub found [ 15.150357] hub 7-0:1.0: 6 ports detected [ 15.161064] ahci 0000:00:1f.2: version 2.2 [ 15.161098] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 [ 15.161882] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match [ 15.184358] usb 7-5: new high speed USB device using ehci_hcd and address 2 [ 15.218766] usb 7-5: configuration #1 chosen from 1 choice [ 15.255146] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode [ 15.255149] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 15.255159] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 15.255283] scsi0 : ahci [ 15.255343] ata1: SATA max UDMA/133 cmd 0xffffc2000145c100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 [ 15.259367] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00016c2000334f24] [ 15.288074] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 15.289083] ata1.00: ATA-7: ST9200420ASG, 3.AAA, max UDMA/133 [ 15.289086] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 15.290082] ata1.00: configured for UDMA/133 [ 15.290153] scsi 0:0:0:0: Direct-Access ATA ST9200420ASG 3.AA PQ: 0 ANSI: 5 [ 15.290831] ata_piix 0000:00:1f.1: version 2.11 [ 15.290854] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 [ 15.290887] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 15.290951] scsi1 : ata_piix [ 15.290982] scsi2 : ata_piix [ 15.291411] ata2: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011810 irq 14 [ 15.291414] ata3: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011818 irq 15 [ 15.294064] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 15.294073] sd 0:0:0:0: [sda] Write Protect is off [ 15.294075] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.294085] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.294123] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 15.294130] sd 0:0:0:0: [sda] Write Protect is off [ 15.294131] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.294142] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.294145] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 15.374960] sd 0:0:0:0: [sda] Attached SCSI disk [ 15.377575] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.596676] Attempting manual resume [ 15.596679] swsusp: Resume From Partition 8:2 [ 15.596680] PM: Checking swsusp image. [ 15.596833] PM: Resume from disk failed. [ 15.607972] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WX05, max UDMA/33 [ 15.635726] kjournald starting. Commit interval 5 seconds [ 15.635519] EXT3-fs: mounted filesystem with ordered data mode. [ 15.779678] ata2.00: configured for UDMA/33 [ 15.779714] ata3: port disabled. ignoring. [ 15.783206] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WX05 PQ: 0 ANSI: 5 [ 15.783256] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 22.339992] agpgart: Detected an Intel 965GM Chipset. [ 22.341599] agpgart: Detected 7676K stolen memory. [ 22.354025] agpgart: AGP aperture is 256M @ 0xe0000000 [ 22.425706] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 22.429121] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.544660] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6] [ 22.670186] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16 [ 22.670192] Socket status: 30000006 [ 22.670196] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x9fff [ 22.670199] pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff [ 22.670201] pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff [ 22.673668] Bluetooth: Core ver 2.11 [ 22.673702] NET: Registered protocol family 31 [ 22.673704] Bluetooth: HCI device and connection manager initialized [ 22.673706] Bluetooth: HCI socket layer initialized [ 22.695504] sdhci: Secure Digital Host Controller Interface driver [ 22.695507] sdhci: Copyright(c) Pierre Ossman [ 22.695795] sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 21) [ 22.695832] ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 22.696671] PCI: Setting latency timer of device 0000:15:00.2 to 64 [ 22.696963] mmc0: SDHCI at 0xf8301800 irq 18 DMA [ 22.760862] input: PC Speaker as /class/input/input2 [ 22.765221] Bluetooth: HCI USB driver ver 2.9 [ 22.766918] usbcore: registered new interface driver hci_usb [ 22.770544] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 22.770547] Uniform CD-ROM driver Revision: 3.20 [ 22.770697] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 22.797078] Linux video capture interface: v2.00 [ 22.847885] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.0 [ 22.847888] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 22.848020] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 22.848051] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 22.848946] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 22.875058] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004) [ 22.878176] usbcore: registered new interface driver uvcvideo [ 22.878179] USB Video Class driver (v0.1.0) [ 23.153750] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 [ 23.154641] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 23.209295] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels [ 23.209514] wmaster0: Selected rate control algorithm 'iwl-4965-rs' [ 23.452625] input: PS/2 Generic Mouse as /class/input/input3 [ 24.538866] lp: driver loaded but no devices found [ 24.601540] Adding 5855684k swap on /dev/sda2. Priority:-1 extents:1 across:5855684k [ 24.857167] EXT3 FS on sda1, internal journal [ 25.311293] kjournald starting. Commit interval 5 seconds [ 25.311505] EXT3 FS on sda5, internal journal [ 25.311510] EXT3-fs: mounted filesystem with ordered data mode.