[ 0.000000] Linux version 2.6.22-12-generic (buildd@rothera) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Thu Sep 20 18:51:18 GMT 2007 (Ubuntu 2.6.22-12.36-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f690000 (usable) [ 0.000000] BIOS-e820: 000000003f690000 - 000000003f69c000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f69c000 - 000000003f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 118MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f7690 [ 0.000000] Entering add_active_range(0, 0, 259728) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 259728 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 259728 [ 0.000000] On node 0 totalpages: 259728 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 237 pages used for memmap [ 0.000000] HighMem zone: 30115 pages, LIFO batch:7 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F75D0, 0024 (r2 TOSQCI) [ 0.000000] ACPI: XSDT 3F691FB4, 0074 (r1 TOSQCI TOSQCI00 6040000 LTP 0) [ 0.000000] ACPI: FACP 3F69BC2A, 00F4 (r3 TOSQCI TOSQCI00 6040000 ALAN 1) [ 0.000000] ACPI: DSDT 3F69305C, 8B5A (r1 TOSQCI Denver 6040000 MSFT 3000001) [ 0.000000] ACPI: FACS 3F69CFC0, 0040 [ 0.000000] ACPI: APIC 3F69BD1E, 0068 (r1 TOSQCI TOSQCI00 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 3F69BD86, 0038 (r1 TOSQCI TOSQCI00 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 3F69BDBE, 003C (r1 TOSQCI TOSQCI00 6040000 LOHR 5A) [ 0.000000] ACPI: APIC 3F69BDFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 3F69BE62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC 3F69BE8A, 0176 (r1 TOSQCI TOSQCI00 6040000 LTP 0) [ 0.000000] ACPI: SSDT 3F6925B4, 025F (r1 PmRef Cpu0Tst 3000 INTL 20060912) [ 0.000000] ACPI: SSDT 3F69250E, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20060912) [ 0.000000] ACPI: SSDT 3F692028, 04E6 (r1 PmRef CpuPm 3000 INTL 20060912) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Built 1 zonelists. Total pages: 257699 [ 0.000000] Kernel command line: root=UUID=73629400-dcc2-43de-8f99-7f6797a20453 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1600.236 MHz processor. [ 21.141045] Console: colour VGA+ 80x25 [ 21.141323] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 21.141718] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 21.175129] Memory: 1018176k/1038912k available (2017k kernel code, 19980k reserved, 918k data, 364k init, 121408k highmem) [ 21.175140] virtual kernel memory layout: [ 21.175141] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 21.175143] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 21.175144] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 21.175146] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 21.175147] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 21.175149] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB) [ 21.175150] .text : 0xc0100000 - 0xc02f8456 (2017 kB) [ 21.175154] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 21.175191] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 21.175343] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 21.175349] hpet0: 3 64-bit timers, 14318180 Hz [ 21.256247] Calibrating delay using timer specific routine.. 3203.81 BogoMIPS (lpj=6407631) [ 21.256272] Security Framework v1.0.0 initialized [ 21.256281] SELinux: Disabled at boot. [ 21.256297] Mount-cache hash table entries: 512 [ 21.256427] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 [ 21.256435] monitor/mwait feature present. [ 21.256437] using mwait in idle threads. [ 21.256442] CPU: L1 I cache: 32K, L1 D cache: 32K [ 21.256445] CPU: L2 cache: 1024K [ 21.256448] CPU: Physical Processor ID: 0 [ 21.256450] CPU: Processor Core ID: 0 [ 21.256452] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000 [ 21.256463] Compat vDSO mapped to ffffe000. [ 21.256476] Checking 'hlt' instruction... OK. [ 21.272350] SMP alternatives: switching to UP code [ 21.272849] Early unpacking initramfs... done [ 21.639361] ACPI: Core revision 20070126 [ 21.639448] ACPI: Looking for DSDT in initramfs... successfully read 32131 bytes from /DSDT.aml. [ 21.639488] ACPI: Table DSDT replaced by host OS [ 21.639492] ACPI: DSDT 00000000, 7D83 (r1 TOSQCI Denver 6040000 INTL 20061109) [ 21.654763] CPU0: Intel Genuine Intel(R) CPU T2060 @ 1.60GHz stepping 0c [ 21.654781] SMP alternatives: switching to SMP code [ 21.654920] Booting processor 1/1 eip 3000 [ 21.665043] Initializing CPU#1 [ 21.743493] Calibrating delay using timer specific routine.. 3200.12 BogoMIPS (lpj=6400245) [ 21.743500] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 [ 21.743506] monitor/mwait feature present. [ 21.743509] CPU: L1 I cache: 32K, L1 D cache: 32K [ 21.743511] CPU: L2 cache: 1024K [ 21.743514] CPU: Physical Processor ID: 0 [ 21.743516] CPU: Processor Core ID: 1 [ 21.743517] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000 [ 21.743992] CPU1: Intel Genuine Intel(R) CPU T2060 @ 1.60GHz stepping 0c [ 21.744018] Total of 2 processors activated (6403.93 BogoMIPS). [ 21.744219] ENABLING IO-APIC IRQs [ 21.744433] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 21.891369] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 21.911360] Brought up 2 CPUs [ 22.015907] migration_cost=58 [ 22.016054] Booting paravirtualized kernel on bare hardware [ 22.016148] Time: 18:57:55 Date: 08/21/107 [ 22.016171] NET: Registered protocol family 16 [ 22.016266] EISA bus registered [ 22.016272] ACPI: bus type pci registered [ 22.041284] PCI: PCI BIOS revision 2.10 entry at 0xfd704, last bus=11 [ 22.041286] PCI: Using configuration type 1 [ 22.041288] Setting up standard PCI resources [ 22.044701] ACPI: EC: Look up EC in DSDT [ 22.045464] ACPI: EC: GPE=0x17, ports=0x66, 0x62 [ 22.119786] ACPI: Interpreter enabled [ 22.119789] ACPI: (supports S0 S3 S4 S5) [ 22.119807] ACPI: Using IOAPIC for interrupt routing [ 22.166728] ACPI: EC: GPE=0x17, ports=0x66, 0x62 [ 22.166789] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 22.166798] PCI: Probing PCI hardware (bus 00) [ 22.167584] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 22.167589] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 22.168483] PCI: Firmware left 0000:0a:08.0 e100 interrupts enabled, disabling [ 22.168581] PCI: Transparent bridge - 0000:00:1e.0 [ 22.168723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 22.169069] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 22.169219] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 22.169369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 22.169535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 22.179627] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 22.179746] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 22.179869] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 22.179984] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 22.180099] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 22.180214] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 22.180329] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 22.180444] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 22.180580] Linux Plug and Play Support v0.97 (c) Adam Belay [ 22.180591] pnp: PnP ACPI init [ 22.180602] ACPI: bus type pnp registered [ 22.183101] pnp: PnP ACPI: found 9 devices [ 22.183103] ACPI: ACPI bus type pnp unregistered [ 22.183107] PnPBIOS: Disabled by ACPI PNP [ 22.183163] PCI: Using ACPI for IRQ routing [ 22.183165] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 22.183170] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 [ 22.183234] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 [ 22.183294] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0 [ 22.183355] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 [ 22.183415] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 [ 22.183475] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1 [ 22.183535] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2 [ 22.183595] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2 [ 22.183656] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2 [ 22.216586] NET: Registered protocol family 8 [ 22.216588] NET: Registered protocol family 20 [ 22.216646] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 22.216650] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 22.216654] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 22.216658] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 22.216664] pnp: 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved [ 22.218773] Time: tsc clocksource has been installed. [ 22.218789] Switched to high resolution mode on CPU 0 [ 22.218879] Switched to high resolution mode on CPU 1 [ 22.246977] PCI: Bridge: 0000:00:1c.0 [ 22.246979] IO window: disabled. [ 22.246985] MEM window: disabled. [ 22.246990] PREFETCH window: disabled. [ 22.247005] PCI: Bridge: 0000:00:1c.1 [ 22.247007] IO window: disabled. [ 22.247013] MEM window: 54000000-540fffff [ 22.247018] PREFETCH window: disabled. [ 22.247024] PCI: Bridge: 0000:00:1c.2 [ 22.247026] IO window: disabled. [ 22.247032] MEM window: disabled. [ 22.247036] PREFETCH window: disabled. [ 22.247045] PCI: Bus 11, cardbus bridge: 0000:0a:04.0 [ 22.247047] IO window: 00002400-000024ff [ 22.247053] IO window: 00002800-000028ff [ 22.247058] PREFETCH window: 50000000-53ffffff [ 22.247064] MEM window: 58000000-5bffffff [ 22.247069] PCI: Bridge: 0000:00:1e.0 [ 22.247072] IO window: 2000-2fff [ 22.247079] MEM window: d0100000-d01fffff [ 22.247084] PREFETCH window: 50000000-53ffffff [ 22.247116] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 22.247125] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 22.247149] PCI: Enabling device 0000:00:1c.1 (0000 -> 0002) [ 22.247154] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 [ 22.247162] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 22.247187] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 22.247195] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 22.247207] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007) [ 22.247214] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 22.247232] PCI: Enabling device 0000:0a:04.0 (0000 -> 0003) [ 22.247236] ACPI: PCI Interrupt 0000:0a:04.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 22.247245] PCI: Setting latency timer of device 0000:0a:04.0 to 64 [ 22.247260] NET: Registered protocol family 2 [ 22.298640] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 22.298721] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 22.299878] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 22.300293] TCP: Hash tables configured (established 131072 bind 65536) [ 22.300297] TCP reno registered [ 22.314751] checking if image is initramfs... it is [ 23.042778] Freeing initrd memory: 7137k freed [ 23.042899] Simple Boot Flag at 0x36 set to 0x1 [ 23.043459] audit: initializing netlink socket (disabled) [ 23.043476] audit(1190401075.412:1): initialized [ 23.043583] highmem bounce pool size: 64 pages [ 23.045827] VFS: Disk quotas dquot_6.5.1 [ 23.045884] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 23.045992] io scheduler noop registered [ 23.045994] io scheduler anticipatory registered [ 23.045997] io scheduler deadline registered [ 23.046014] io scheduler cfq registered (default) [ 23.046031] Boot video device is 0000:00:02.0 [ 31.033756] 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 [ 31.033986] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 31.034046] assign_interrupt_mode Found MSI capability [ 31.034097] Allocate Port Service[0000:00:1c.0:pcie00] [ 31.034143] Allocate Port Service[0000:00:1c.0:pcie02] [ 31.034250] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 31.034308] assign_interrupt_mode Found MSI capability [ 31.034355] Allocate Port Service[0000:00:1c.1:pcie00] [ 31.034391] Allocate Port Service[0000:00:1c.1:pcie02] [ 31.034500] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 31.034559] assign_interrupt_mode Found MSI capability [ 31.034606] Allocate Port Service[0000:00:1c.2:pcie00] [ 31.034643] Allocate Port Service[0000:00:1c.2:pcie02] [ 31.034867] isapnp: Scanning for PnP cards... [ 31.388692] isapnp: No Plug & Play device found [ 31.416449] Real Time Clock Driver v1.12ac [ 31.416704] hpet_resources: 0xfed00000 is busy [ 31.416740] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 31.418520] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 31.418666] input: Macintosh mouse button emulation as /class/input/input0 [ 31.418752] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 31.420369] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 31.420375] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 31.420518] mice: PS/2 mouse device common for all mice [ 31.420628] EISA: Probing bus 0 at eisa.0 [ 31.420637] Cannot allocate resource for EISA slot 1 [ 31.420640] Cannot allocate resource for EISA slot 2 [ 31.420668] EISA: Detected 0 cards. [ 31.420768] TCP cubic registered [ 31.420784] NET: Registered protocol family 1 [ 31.420809] Using IPI No-Shortcut mode [ 31.420980] Magic number: 7:947:999 [ 31.421000] hash matches device ttyaf [ 31.421140] hash matches device 00:01 [ 31.421142] hash matches device pnp0 [ 31.421349] Freeing unused kernel memory: 364k freed [ 31.457169] input: AT Translated Set 2 keyboard as /class/input/input1 [ 32.653205] AppArmor: AppArmor initialized<5>audit(1190401084.912:2): type=1505 info="AppArmor initialized" pid=1239 [ 32.662287] fuse init (API version 7.8) [ 32.668454] Failure registering capabilities with primary security module. [ 32.705681] ACPI: SSDT 3F692D5C, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20060912) [ 32.705937] ACPI: SSDT 3F692813, 04C4 (r1 PmRef Cpu0Cst 3001 INTL 20060912) [ 32.706539] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 32.706791] ACPI: SSDT 3F692F94, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20060912) [ 32.707024] ACPI: SSDT 3F692CD7, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20060912) [ 32.707682] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 11.424000] Marking TSC unstable due to: possible TSC halt in C2. [ 11.428000] Time: hpet clocksource has been installed. [ 11.428000] ACPI: Thermal Zone [THRM] (53 C) [ 11.944000] usbcore: registered new interface driver usbfs [ 11.944000] usbcore: registered new interface driver hub [ 11.944000] usbcore: registered new device driver usb [ 11.944000] USB Universal Host Controller Interface driver v3.0 [ 11.944000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 11.944000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 11.944000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 11.944000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 11.944000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820 [ 11.944000] usb usb1: configuration #1 chosen from 1 choice [ 11.944000] hub 1-0:1.0: USB hub found [ 11.944000] hub 1-0:1.0: 2 ports detected [ 11.992000] SCSI subsystem initialized [ 11.996000] libata version 2.21 loaded. [ 12.008000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 12.008000] e100: Copyright(c) 1999-2006 Intel Corporation [ 12.048000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 [ 12.048000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 12.048000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 12.048000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 12.048000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840 [ 12.048000] usb usb2: configuration #1 chosen from 1 choice [ 12.048000] hub 2-0:1.0: USB hub found [ 12.048000] hub 2-0:1.0: 2 ports detected [ 12.152000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 12.152000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 12.152000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 12.152000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 12.152000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 12.152000] usb usb3: configuration #1 chosen from 1 choice [ 12.152000] hub 3-0:1.0: USB hub found [ 12.152000] hub 3-0:1.0: 2 ports detected [ 12.256000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17 [ 12.256000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 12.256000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 12.256000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 12.256000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880 [ 12.256000] usb usb4: configuration #1 chosen from 1 choice [ 12.256000] hub 4-0:1.0: USB hub found [ 12.256000] hub 4-0:1.0: 2 ports detected [ 12.360000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 [ 12.360000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 12.360000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 12.360000] ACPI: PCI Interrupt 0000:0a:08.0[A] -> GSI 20 (level, low) -> IRQ 21 [ 12.360000] PCI: Setting latency timer of device 0000:0a:08.0 to 64 [ 12.360000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 12.360000] ehci_hcd 0000:00:1d.7: debug port 1 [ 12.360000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 12.360000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xd0544000 [ 12.364000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 12.364000] usb usb5: configuration #1 chosen from 1 choice [ 12.364000] hub 5-0:1.0: USB hub found [ 12.364000] hub 5-0:1.0: 8 ports detected [ 12.388000] e100: eth0: e100_probe: addr 0xd0102000, irq 21, MAC addr 00:16:36:C9:07:02 [ 12.468000] PCI: Enabling device 0000:0a:04.1 (0000 -> 0002) [ 12.468000] ACPI: PCI Interrupt 0000:0a:04.1[A] -> GSI 17 (level, low) -> IRQ 16 [ 12.468000] PCI: Setting latency timer of device 0000:0a:04.1 to 64 [ 12.500000] Clocksource tsc unstable (delta = -296225105 ns) [ 12.516000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d0103000-d01037ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 12.520000] ata_piix 0000:00:1f.2: version 2.11 [ 12.520000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 12.676000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 [ 12.676000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 12.676000] scsi0 : ata_piix [ 12.676000] scsi1 : ata_piix [ 12.676000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14 [ 12.676000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15 [ 12.840000] ata1.00: ATA-7: TOSHIBA MK1234GSX, AH001M, max UDMA/100 [ 12.840000] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 12.848000] ata1.00: configured for UDMA/100 [ 13.168000] ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.10, max UDMA/33 [ 13.340000] ata2.00: configured for UDMA/33 [ 13.340000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1234GS AH00 PQ: 0 ANSI: 5 [ 13.340000] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.10 PQ: 0 ANSI: 5 [ 13.352000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 13.352000] sd 0:0:0:0: [sda] Write Protect is off [ 13.352000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.352000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.352000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 13.352000] sd 0:0:0:0: [sda] Write Protect is off [ 13.352000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.352000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.352000] sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 13.356000] Uniform CD-ROM driver Revision: 3.20 [ 13.356000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 13.360000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 13.360000] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 13.376000] sda1 sda2 sda3 < sda5 sda6 sda7 > [ 13.428000] sd 0:0:0:0: [sda] Attached SCSI disk [ 13.844000] Attempting manual resume [ 13.844000] swsusp: Resume From Partition 8:7 [ 13.844000] PM: Checking swsusp image. [ 13.844000] PM: Resume from disk failed. [ 13.860000] EXT3-fs: INFO: recovery required on readonly filesystem. [ 13.860000] EXT3-fs: write access will be enabled during recovery. [ 17.800000] kjournald starting. Commit interval 5 seconds [ 17.800000] EXT3-fs: sda6: orphan cleanup on readonly fs [ 17.800000] ext3_orphan_cleanup: deleting unreferenced inode 1286906 [ 17.836000] ext3_orphan_cleanup: deleting unreferenced inode 1255436 [ 17.844000] EXT3-fs: sda6: 2 orphan inodes deleted [ 17.844000] EXT3-fs: recovery complete. [ 17.848000] EXT3-fs: mounted filesystem with ordered data mode. [ 31.240000] Linux agpgart interface v0.102 (c) Dave Jones [ 31.320000] agpgart: Detected an Intel 945GM Chipset. [ 31.320000] agpgart: Detected 7932K stolen memory. [ 31.336000] agpgart: AGP aperture is 256M @ 0xc0000000 [ 31.392000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 31.468000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 31.696000] iTCO_vendor_support: vendor-support=0 [ 31.700000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 31.700000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 31.700000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 31.764000] intel_rng: FWH not detected [ 31.948000] PCI: Enabling device 0000:0a:04.2 (0000 -> 0002) [ 31.948000] ACPI: PCI Interrupt 0000:0a:04.2[A] -> GSI 17 (level, low) -> IRQ 16 [ 31.948000] PCI: Setting latency timer of device 0000:0a:04.2 to 64 [ 31.988000] sdhci: Secure Digital Host Controller Interface driver [ 31.988000] sdhci: Copyright(c) Pierre Ossman [ 31.988000] sdhci: SDHCI controller found at 0000:0a:04.3 [104c:803c] (rev 0) [ 31.988000] PCI: Enabling device 0000:0a:04.3 (0000 -> 0002) [ 31.988000] ACPI: PCI Interrupt 0000:0a:04.3[A] -> GSI 17 (level, low) -> IRQ 16 [ 31.988000] PCI: Setting latency timer of device 0000:0a:04.3 to 64 [ 31.988000] mmc0: SDHCI at 0xd0103800 irq 16 DMA [ 32.016000] ath_hal: module license 'Proprietary' taints kernel. [ 32.020000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 32.080000] Yenta: CardBus bridge found at 0000:0a:04.0 [1179:ff31] [ 32.080000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 32.080000] Yenta: Routing CardBus interrupts to PCI [ 32.080000] Yenta TI: socket 0000:0a:04.0, mfunc 0x01a21b22, devctl 0x66 [ 32.200000] wlan: 0.8.4.2 (0.9.3.2) [ 32.232000] ath_pci: 0.9.4.5 (0.9.3.2) [ 32.320000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 [ 32.320000] Socket status: 30000006 [ 32.320000] Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e [ 32.320000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 32.320000] cs: IO port probe 0x2000-0x2fff: clean. [ 32.320000] pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff [ 32.320000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 32.328000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002) [ 32.328000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 32.328000] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 32.852000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0 [ 32.852000] synaptics: Toshiba Satellite P105 detected, limiting rate to 40pps. [ 32.872000] ath_rate_sample: 1.2 (0.9.3.2) [ 32.872000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 32.872000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 32.872000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 32.872000] wifi0: mac 10.0 phy 6.1 radio 10.2 [ 32.872000] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 32.872000] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 32.872000] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 32.872000] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 32.872000] wifi0: Use hw queue 8 for CAB traffic [ 32.872000] wifi0: Use hw queue 9 for beacons [ 32.888000] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [ 32.912000] wifi0: Atheros 5424/2424: mem=0x54000000, irq=16 [ 32.964000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 32.964000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 33.136000] cs: IO port probe 0x100-0x3af: clean. [ 33.136000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 33.136000] cs: IO port probe 0x820-0x8ff: clean. [ 33.140000] cs: IO port probe 0xc00-0xcf7: clean. [ 33.140000] cs: IO port probe 0xa00-0xaff: clean. [ 34.140000] hda_intel: azx_get_response timeout, switching to polling mode... [ 34.348000] lp: driver loaded but no devices found [ 34.444000] Adding 3012148k swap on /dev/sda7. Priority:-1 extents:1 across:3012148k [ 34.856000] EXT3 FS on sda6, internal journal [ 35.288000] kjournald starting. Commit interval 5 seconds [ 35.288000] EXT3 FS on sda2, internal journal [ 35.288000] EXT3-fs: mounted filesystem with ordered data mode. [ 36.288000] input: Power Button (FF) as /class/input/input3 [ 36.288000] ACPI: Power Button (FF) [PWRF] [ 36.288000] input: Lid Switch as /class/input/input4 [ 36.288000] ACPI: Lid Switch [LID] [ 36.288000] input: Power Button (CM) as /class/input/input5 [ 36.288000] ACPI: Power Button (CM) [PWRB] [ 36.380000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 36.468000] ACPI: AC Adapter [ACAD] (off-line) [ 36.488000] No dock devices found. [ 36.704000] ACPI: Battery Slot [BAT1] (battery present) [ 40.376000] NET: Registered protocol family 10 [ 40.376000] lo: Disabled Privacy Extensions [ 40.376000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 41.720000] ppdev: user-space parallel port driver [ 42.156000] audit(1190419116.732:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4929 profile="/usr/sbin/cupsd" [ 42.284000] apm: BIOS not found. [ 42.556000] Failure registering capabilities with primary security module. [ 42.896000] Bluetooth: Core ver 2.11 [ 42.896000] NET: Registered protocol family 31 [ 42.896000] Bluetooth: HCI device and connection manager initialized [ 42.896000] Bluetooth: HCI socket layer initialized [ 42.904000] Bluetooth: L2CAP ver 2.8 [ 42.904000] Bluetooth: L2CAP socket layer initialized [ 43.032000] Bluetooth: RFCOMM socket layer initialized [ 43.032000] Bluetooth: RFCOMM TTY layer initialized [ 43.032000] Bluetooth: RFCOMM ver 1.8 [ 43.696000] [drm] Initialized drm 1.1.0 20060810 [ 43.728000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 43.732000] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 51.016000] ath0: no IPv6 routers present [ 285.864000] NET: Registered protocol family 17 [ 302.572000] ath0: no IPv6 routers present [ 442.324000] ACPI: PCI interrupt for device 0000:03:00.0 disabled [ 442.324000] ath_pci: driver unloaded [ 442.380000] ACPI: PCI interrupt for device 0000:0a:08.0 disabled [ 445.908000] PM: Preparing system for mem sleep [ 445.908000] Stopping tasks ... done. [ 446.176000] Suspending console(s) [ 446.176000] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 446.484000] sd 0:0:0:0: [sda] Stopping disk [ 446.872000] usb_device usbdev5.1: PM: suspend 0->2, parent usb5 already 2 [ 446.872000] usb_endpoint usbdev5.1_ep81: PM: suspend 0->2, parent 5-0:1.0 already 2 [ 446.872000] hub 5-0:1.0: PM: suspend 2->2, parent usb5 already 2 [ 446.872000] usb_endpoint usbdev5.1_ep00: PM: suspend 0->2, parent usb5 already 2 [ 446.872000] usb_device usbdev4.1: PM: suspend 0->2, parent usb4 already 2 [ 446.872000] usb_endpoint usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2 [ 446.872000] hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2 [ 446.872000] usb_endpoint usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2 [ 446.872000] usb_device usbdev3.1: PM: suspend 0->2, parent usb3 already 2 [ 446.872000] usb_endpoint usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2 [ 446.872000] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2 [ 446.872000] usb_endpoint usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2 [ 446.872000] usb_device usbdev2.1: PM: suspend 0->2, parent usb2 already 2 [ 446.872000] usb_endpoint usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2 [ 446.872000] hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2 [ 446.872000] usb_endpoint usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2 [ 446.872000] usb_device usbdev1.1: PM: suspend 0->2, parent usb1 already 2 [ 446.872000] usb_endpoint usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2 [ 446.872000] hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2 [ 446.872000] usb_endpoint usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2 [ 447.504000] ACPI: PCI interrupt for device 0000:0a:04.3 disabled [ 447.520000] ACPI: PCI interrupt for device 0000:0a:04.2 disabled [ 447.536000] ieee1394: hpsb_bus_reset called while bus reset already in progress [ 447.552000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 447.568000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 447.584000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled [ 447.584000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 447.584000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 447.584000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 447.588000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 447.632000] Disabling non-boot CPUs ... [ 447.748000] CPU 1 is now offline [ 447.748000] SMP alternatives: switching to UP code [ 447.748000] CPU1 is down [ 447.748000] PM: Entering mem sleep [ 447.748000] Back to C! [ 447.748000] PM: Finishing wakeup. [ 447.748000] Enabling non-boot CPUs ... [ 447.760000] SMP alternatives: switching to SMP code [ 447.760000] Booting processor 1/1 eip 3000 [ 447.768000] Initializing CPU#1 [ 447.848000] Calibrating delay using timer specific routine.. 3198.53 BogoMIPS (lpj=6397066) [ 447.848000] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 [ 447.848000] monitor/mwait feature present. [ 447.848000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 447.848000] CPU: L2 cache: 1024K [ 447.848000] CPU: Physical Processor ID: 0 [ 447.848000] CPU: Processor Core ID: 1 [ 447.848000] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000 [ 447.848000] CPU1: Intel Genuine Intel(R) CPU T2060 @ 1.60GHz stepping 0c [ 447.848000] Switched to high resolution mode on CPU 1 [ 447.848000] CPU1 is up [ 447.848000] APIC error on CPU1: 00(40) [ 447.848000] APIC error on CPU0: 00(40) [ 447.944000] PM: Writing back config space on device 0000:00:02.0 at offset f (was 100, writing 10b) [ 447.944000] PM: Writing back config space on device 0000:00:02.0 at offset 7 (was 0, writing d0300000) [ 447.944000] PM: Writing back config space on device 0000:00:02.0 at offset 6 (was d0000008, writing c0000008) [ 447.944000] PM: Writing back config space on device 0000:00:02.0 at offset 5 (was de01, writing 1801) [ 447.944000] PM: Writing back config space on device 0000:00:02.0 at offset 4 (was cff80000, writing d0200000) [ 447.944000] PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900000, writing 900007) [ 447.964000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 447.964000] PM: Writing back config space on device 0000:00:02.1 at offset 4 (was 0, writing d0280000) [ 447.964000] PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007) [ 448.000000] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10b) [ 448.000000] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing d0340004) [ 448.000000] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10) [ 448.000000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002) [ 448.000000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 448.000000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 448.048000] PM: Writing back config space on device 0000:00:1c.0 at offset f (was 100, writing 4010b) [ 448.048000] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 1fff1) [ 448.048000] PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing fff0) [ 448.048000] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 200000f0) [ 448.048000] PM: Writing back config space on device 0000:00:1c.0 at offset 6 (was 0, writing 20200) [ 448.048000] PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810010) [ 448.048000] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100404) [ 448.048000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 448.048000] PM: Writing back config space on device 0000:00:1c.1 at offset f (was 200, writing 4020b) [ 448.048000] PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1) [ 448.048000] PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing 54005400) [ 448.048000] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 200000f0) [ 448.048000] PM: Writing back config space on device 0000:00:1c.1 at offset 6 (was 0, writing 30300) [ 448.048000] PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810010) [ 448.048000] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100406) [ 448.048000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 448.048000] PM: Writing back config space on device 0000:00:1c.2 at offset f (was 300, writing 4030b) [ 448.048000] PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 1fff1) [ 448.048000] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing fff0) [ 448.048000] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 200000f0) [ 448.048000] PM: Writing back config space on device 0000:00:1c.2 at offset 6 (was 0, writing 40400) [ 448.048000] PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810010) [ 448.048000] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100404) [ 448.048000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 448.048000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 448.048000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 448.048000] usb usb1: root hub lost power or was reset [ 448.048000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 [ 448.048000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 448.048000] usb usb2: root hub lost power or was reset [ 448.048000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 448.048000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 448.048000] usb usb3: root hub lost power or was reset [ 448.048000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17 [ 448.048000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 448.048000] usb usb4: root hub lost power or was reset [ 448.064000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 [ 448.064000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 448.064000] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 53f15001) [ 448.064000] PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing d010d010) [ 448.064000] PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 22802020) [ 448.064000] PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 200b0a00, writing 200e0a00) [ 448.064000] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100004, writing 100007) [ 448.064000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 448.080000] PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 2ff) [ 448.080000] PM: Writing back config space on device 0000:00:1f.2 at offset 8 (was 1, writing 18b1) [ 448.080000] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00000, writing 2b80005) [ 448.080000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 [ 448.080000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 448.080000] PM: Writing back config space on device 0000:00:1f.3 at offset f (was 200, writing 20b) [ 448.080000] PM: Writing back config space on device 0000:00:1f.3 at offset 8 (was 1101, writing 18c1) [ 448.080000] PM: Writing back config space on device 0000:03:00.0 at offset f (was 100, writing 10b) [ 448.080000] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 4, writing 54000004) [ 448.080000] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 10) [ 448.080000] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100002) [ 448.080000] PM: Writing back config space on device 0000:0a:04.0 at offset f (was 34001ff, writing 5c0010b) [ 448.080000] PM: Writing back config space on device 0000:0a:04.0 at offset e (was 0, writing 28fc) [ 448.080000] PM: Writing back config space on device 0000:0a:04.0 at offset d (was 0, writing 2800) [ 448.080000] PM: Writing back config space on device 0000:0a:04.0 at offset c (was 0, writing 24fc) [ 448.080000] PM: Writing back config space on device 0000:0a:04.0 at offset b (was 0, writing 2400) [ 448.080000] PM: Writing back config space on device 0000:0a:04.0 at offset a (was 0, writing 5bfff000) [ 448.080000] PM: Writing back config space on device 0000:0a:04.0 at offset 9 (was 0, writing 58000000) [ 448.080000] PM: Writing back config space on device 0000:0a:04.0 at offset 8 (was 0, writing 53fff000) [ 448.080000] PM: Writing back config space on device 0000:0a:04.0 at offset 7 (was 0, writing 50000000) [ 448.080000] PM: Writing back config space on device 0000:0a:04.0 at offset 6 (was 0, writing b00e0b0a) [ 448.080000] PM: Writing back config space on device 0000:0a:04.0 at offset 4 (was 0, writing d0100000) [ 448.080000] PM: Writing back config space on device 0000:0a:04.0 at offset 3 (was 820000, writing 82a820) [ 448.080000] PM: Writing back config space on device 0000:0a:04.0 at offset 1 (was 2100000, writing 2100007) [ 448.096000] PM: Writing back config space on device 0000:0a:04.1 at offset f (was 4030100, writing 403010b) [ 448.096000] PM: Writing back config space on device 0000:0a:04.1 at offset 5 (was 0, writing d0104000) [ 448.096000] PM: Writing back config space on device 0000:0a:04.1 at offset 4 (was 0, writing d0103000) [ 448.096000] PM: Writing back config space on device 0000:0a:04.1 at offset 3 (was 800000, writing 804000) [ 448.096000] PM: Writing back config space on device 0000:0a:04.1 at offset 1 (was 2100000, writing 2100006) [ 448.144000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d0103000-d01037ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 448.192000] PM: Writing back config space on device 0000:0a:04.2 at offset f (was 40701ff, writing 407010b) [ 448.192000] PM: Writing back config space on device 0000:0a:04.2 at offset 4 (was 0, writing d0101000) [ 448.192000] PM: Writing back config space on device 0000:0a:04.2 at offset 3 (was 800000, writing 804000) [ 448.192000] PM: Writing back config space on device 0000:0a:04.2 at offset 1 (was 2100000, writing 2100006) [ 448.192000] ACPI: PCI Interrupt 0000:0a:04.2[A] -> GSI 17 (level, low) -> IRQ 16 [ 448.236000] PM: Writing back config space on device 0000:0a:04.3 at offset f (was 40701ff, writing 407010b) [ 448.236000] PM: Writing back config space on device 0000:0a:04.3 at offset 4 (was 0, writing d0103800) [ 448.236000] PM: Writing back config space on device 0000:0a:04.3 at offset 3 (was 800000, writing 804000) [ 448.236000] PM: Writing back config space on device 0000:0a:04.3 at offset 1 (was 2100000, writing 2100006) [ 448.236000] ACPI: PCI Interrupt 0000:0a:04.3[A] -> GSI 17 (level, low) -> IRQ 16 [ 448.236000] PM: Writing back config space on device 0000:0a:08.0 at offset f (was 38080100, writing 3808010b) [ 448.236000] PM: Writing back config space on device 0000:0a:08.0 at offset 5 (was 1, writing 2001) [ 448.236000] PM: Writing back config space on device 0000:0a:08.0 at offset 4 (was 0, writing d0102000) [ 448.236000] PM: Writing back config space on device 0000:0a:08.0 at offset 3 (was 0, writing 4000) [ 448.236000] PM: Writing back config space on device 0000:0a:08.0 at offset 1 (was 2900000, writing 2900003) [ 448.572000] ata2.00: configured for UDMA/33 [ 449.060000] usb_endpoint usbdev5.1_ep00: PM: resume from 0, parent usb5 still 2 [ 449.060000] usb_endpoint usbdev5.1_ep81: PM: resume from 0, parent 5-0:1.0 still 2 [ 449.060000] usb_device usbdev5.1: PM: resume from 0, parent usb5 still 2 [ 449.060000] sd 0:0:0:0: [sda] Starting disk [ 449.780000] ata1.00: configured for UDMA/100 [ 449.788000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 449.792000] Restarting tasks ... <5>sd 0:0:0:0: [sda] Write Protect is off [ 449.792000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 449.800000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 449.804000] done. [ 450.064000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f0000c707c1] [ 450.348000] ath_pci: 0.9.4.5 (0.9.3.2) [ 450.352000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 450.352000] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 450.860000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 450.860000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 450.860000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 450.860000] wifi0: mac 10.0 phy 6.1 radio 10.2 [ 450.860000] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 450.860000] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 450.860000] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 450.860000] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 450.860000] wifi0: Use hw queue 8 for CAB traffic [ 450.860000] wifi0: Use hw queue 9 for beacons [ 450.864000] wifi0: Atheros 5424/2424: mem=0x54000000, irq=16 [ 450.900000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 450.900000] e100: Copyright(c) 1999-2006 Intel Corporation [ 450.900000] ACPI: PCI Interrupt 0000:0a:08.0[A] -> GSI 20 (level, low) -> IRQ 21 [ 450.928000] e100: eth0: e100_probe: addr 0xd0102000, irq 21, MAC addr 00:16:36:C9:07:02 [ 451.308000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 451.432000] input: Power Button (FF) as /class/input/input6 [ 451.432000] ACPI: Power Button (FF) [PWRF] [ 451.444000] input: Lid Switch as /class/input/input7 [ 451.444000] ACPI: Lid Switch [LID] [ 451.444000] input: Power Button (CM) as /class/input/input8 [ 451.444000] ACPI: Power Button (CM) [PWRB] [ 451.672000] ACPI: Thermal Zone [THRM] (51 C) [ 451.748000] ACPI: AC Adapter [ACAD] (off-line) [ 451.780000] ACPI: Battery Slot [BAT1] (battery present) [ 462.500000] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready [ 483.692000] ath0: no IPv6 routers present [ 492.096000] ACPI: PCI interrupt for device 0000:03:00.0 disabled [ 492.096000] ath_pci: driver unloaded [ 492.168000] ACPI: PCI interrupt for device 0000:0a:08.0 disabled [ 495.492000] PM: suspend-to-disk mode set to 'shutdown' [ 495.492000] swsusp: Basic memory bitmaps created [ 495.492000] Stopping tasks ... done. [ 495.660000] Shrinking memory... -\|done (28092 pages freed) [ 496.028000] Freed 112368 kbytes in 0.36 seconds (312.13 MB/s) [ 496.028000] Suspending console(s) [ 496.028000] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 496.028000] usb_device usbdev5.1: PM: suspend 0->1, parent usb5 already 2 [ 496.028000] usb_endpoint usbdev5.1_ep81: PM: suspend 0->1, parent 5-0:1.0 already 2 [ 496.028000] hub 5-0:1.0: PM: suspend 2->1, parent usb5 already 2 [ 496.028000] usb_endpoint usbdev5.1_ep00: PM: suspend 0->1, parent usb5 already 2 [ 496.028000] usb_device usbdev4.1: PM: suspend 0->1, parent usb4 already 2 [ 496.028000] usb_endpoint usbdev4.1_ep81: PM: suspend 0->1, parent 4-0:1.0 already 2 [ 496.028000] hub 4-0:1.0: PM: suspend 2->1, parent usb4 already 2 [ 496.028000] usb_endpoint usbdev4.1_ep00: PM: suspend 0->1, parent usb4 already 2 [ 496.028000] usb_device usbdev3.1: PM: suspend 0->1, parent usb3 already 2 [ 496.028000] usb_endpoint usbdev3.1_ep81: PM: suspend 0->1, parent 3-0:1.0 already 2 [ 496.028000] hub 3-0:1.0: PM: suspend 2->1, parent usb3 already 2 [ 496.028000] usb_endpoint usbdev3.1_ep00: PM: suspend 0->1, parent usb3 already 2 [ 496.028000] usb_device usbdev2.1: PM: suspend 0->1, parent usb2 already 2 [ 496.028000] usb_endpoint usbdev2.1_ep81: PM: suspend 0->1, parent 2-0:1.0 already 2 [ 496.028000] hub 2-0:1.0: PM: suspend 2->1, parent usb2 already 2 [ 496.028000] usb_endpoint usbdev2.1_ep00: PM: suspend 0->1, parent usb2 already 2 [ 496.028000] usb_device usbdev1.1: PM: suspend 0->1, parent usb1 already 2 [ 496.028000] usb_endpoint usbdev1.1_ep81: PM: suspend 0->1, parent 1-0:1.0 already 2 [ 496.028000] hub 1-0:1.0: PM: suspend 2->1, parent usb1 already 2 [ 496.028000] usb_endpoint usbdev1.1_ep00: PM: suspend 0->1, parent usb1 already 2 [ 496.028000] ACPI: PCI interrupt for device 0000:0a:04.3 disabled [ 496.044000] ACPI: PCI interrupt for device 0000:0a:04.2 disabled [ 496.076000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 496.076000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 496.092000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled [ 496.092000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 496.092000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 496.092000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 496.096000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 496.112000] Disabling non-boot CPUs ... [ 496.228000] CPU 1 is now offline [ 496.228000] SMP alternatives: switching to UP code [ 496.228000] CPU1 is down [ 496.228000] PM: snapshotting memory. [ 496.228000] swsusp: critical section: [ 496.228000] swsusp: Need to copy 119199 pages [ 496.228000] swsusp: Normal pages needed: 111917 + 1024 + 24, available pages: 133236 [ 496.228000] PM: Image restored successfully. [ 496.228000] Enabling non-boot CPUs ... [ 496.240000] SMP alternatives: switching to SMP code [ 496.240000] Booting processor 1/1 eip 3000 [ 496.248000] Initializing CPU#1 [ 496.328000] Calibrating delay using timer specific routine.. 3198.52 BogoMIPS (lpj=6397046) [ 496.328000] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 [ 496.328000] monitor/mwait feature present. [ 496.328000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 496.328000] CPU: L2 cache: 1024K [ 496.328000] CPU: Physical Processor ID: 0 [ 496.328000] CPU: Processor Core ID: 1 [ 496.328000] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000 [ 496.328000] CPU1: Intel Genuine Intel(R) CPU T2060 @ 1.60GHz stepping 0c [ 496.328000] Switched to high resolution mode on CPU 1 [ 496.328000] CPU1 is up [ 496.356000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 496.372000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002) [ 496.372000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 496.372000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 496.428000] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 200000f0, writing f0) [ 496.428000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 496.428000] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 200000f0, writing f0) [ 496.428000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 496.428000] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 200000f0, writing f0) [ 496.428000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 496.428000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 496.428000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 496.428000] usb usb1: root hub lost power or was reset [ 496.428000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 [ 496.428000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 496.428000] usb usb2: root hub lost power or was reset [ 496.428000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 496.428000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 496.428000] usb usb3: root hub lost power or was reset [ 496.428000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17 [ 496.428000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 496.428000] usb usb4: root hub lost power or was reset [ 496.444000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 [ 496.444000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 496.444000] usb usb5: root hub lost power or was reset [ 496.448000] ehci_hcd 0000:00:1d.7: debug port 1 [ 496.448000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 496.448000] PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 200b0a00, writing 200e0a00) [ 496.448000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 496.448000] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b80001, writing 2b80005) [ 496.448000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 [ 496.448000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 496.448000] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100002) [ 496.448000] PM: Writing back config space on device 0000:0a:04.0 at offset f (was 340010b, writing 5c0010b) [ 496.448000] PM: Writing back config space on device 0000:0a:04.0 at offset 3 (was 824000, writing 82a820) [ 496.464000] PM: Writing back config space on device 0000:0a:04.1 at offset f (was 4030100, writing 403010b) [ 496.464000] PM: Writing back config space on device 0000:0a:04.1 at offset 5 (was 0, writing d0104000) [ 496.464000] PM: Writing back config space on device 0000:0a:04.1 at offset 4 (was 0, writing d0103000) [ 496.464000] PM: Writing back config space on device 0000:0a:04.1 at offset 3 (was 800000, writing 804000) [ 496.464000] PM: Writing back config space on device 0000:0a:04.1 at offset 1 (was 2100000, writing 2100006) [ 496.512000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d0103000-d01037ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 496.528000] PM: Writing back config space on device 0000:0a:04.2 at offset 3 (was 800000, writing 804000) [ 496.528000] PM: Writing back config space on device 0000:0a:04.2 at offset 1 (was 2100000, writing 2100006) [ 496.528000] ACPI: PCI Interrupt 0000:0a:04.2[A] -> GSI 17 (level, low) -> IRQ 16 [ 496.544000] PM: Writing back config space on device 0000:0a:04.3 at offset 3 (was 800000, writing 804000) [ 496.544000] PM: Writing back config space on device 0000:0a:04.3 at offset 1 (was 2100000, writing 2100006) [ 496.544000] ACPI: PCI Interrupt 0000:0a:04.3[A] -> GSI 17 (level, low) -> IRQ 16 [ 496.628000] ata1.00: configured for UDMA/100 [ 496.628000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 496.628000] sd 0:0:0:0: [sda] Write Protect is off [ 496.628000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 496.628000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 496.940000] ata2.00: configured for UDMA/33 [ 497.372000] sd 0:0:0:0: [sda] Starting disk [ 497.404000] Restarting tasks ... done. [ 497.456000] swsusp: Basic memory bitmaps freed [ 498.200000] ath_pci: 0.9.4.5 (0.9.3.2) [ 498.204000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 498.204000] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 498.708000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 498.708000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 498.708000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 498.708000] wifi0: mac 10.0 phy 6.1 radio 10.2 [ 498.708000] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 498.708000] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 498.708000] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 498.708000] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 498.708000] wifi0: Use hw queue 8 for CAB traffic [ 498.708000] wifi0: Use hw queue 9 for beacons [ 498.728000] wifi0: Atheros 5424/2424: mem=0x54000000, irq=16 [ 498.792000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 498.792000] e100: Copyright(c) 1999-2006 Intel Corporation [ 498.792000] PCI: Enabling device 0000:0a:08.0 (0000 -> 0003) [ 498.792000] ACPI: PCI Interrupt 0000:0a:08.0[A] -> GSI 20 (level, low) -> IRQ 21 [ 498.792000] PCI: Setting latency timer of device 0000:0a:08.0 to 64 [ 498.820000] e100: eth0: e100_probe: addr 0xd0102000, irq 21, MAC addr 00:16:36:C9:07:02 [ 499.168000] input: Power Button (FF) as /class/input/input9 [ 499.168000] ACPI: Power Button (FF) [PWRF] [ 499.168000] input: Lid Switch as /class/input/input10 [ 499.168000] ACPI: Lid Switch [LID] [ 499.168000] input: Power Button (CM) as /class/input/input11 [ 499.168000] ACPI: Power Button (CM) [PWRB] [ 499.276000] ACPI: Thermal Zone [THRM] (51 C) [ 499.540000] ACPI: AC Adapter [ACAD] (off-line) [ 499.568000] ACPI: Battery Slot [BAT1] (battery present) [ 506.300000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 547.508000] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready [ 567.868000] ath0: no IPv6 routers present [ 604.104000] atkbd.c: Unknown key pressed (translated set 2, code 0x55 on isa0060/serio0). [ 604.104000] atkbd.c: Use 'setkeycodes 55 ' to make it known. [ 607.996000] atkbd.c: Unknown key released (translated set 2, code 0x55 on isa0060/serio0). [ 607.996000] atkbd.c: Use 'setkeycodes 55 ' to make it known. [ 608.964000] atkbd.c: Unknown key pressed (translated set 2, code 0x55 on isa0060/serio0). [ 608.964000] atkbd.c: Use 'setkeycodes 55 ' to make it known. [ 612.084000] atkbd.c: Unknown key released (translated set 2, code 0x55 on isa0060/serio0). [ 612.084000] atkbd.c: Use 'setkeycodes 55 ' to make it known. [ 1269.212000] atkbd.c: Unknown key pressed (translated set 2, code 0x55 on isa0060/serio0). [ 1269.212000] atkbd.c: Use 'setkeycodes 55 ' to make it known. [ 1269.652000] atkbd.c: Unknown key pressed (translated set 2, code 0xee on isa0060/serio0). [ 1269.652000] atkbd.c: Use 'setkeycodes e06e ' to make it known. [ 1269.732000] atkbd.c: Unknown key released (translated set 2, code 0xee on isa0060/serio0). [ 1269.732000] atkbd.c: Use 'setkeycodes e06e ' to make it known. [ 1269.808000] atkbd.c: Unknown key pressed (translated set 2, code 0xee on isa0060/serio0). [ 1269.808000] atkbd.c: Use 'setkeycodes e06e ' to make it known. [ 1269.892000] atkbd.c: Unknown key released (translated set 2, code 0xee on isa0060/serio0). [ 1269.892000] atkbd.c: Use 'setkeycodes e06e ' to make it known. [ 1269.964000] atkbd.c: Unknown key pressed (translated set 2, code 0xee on isa0060/serio0). [ 1269.964000] atkbd.c: Use 'setkeycodes e06e ' to make it known. [ 1270.040000] atkbd.c: Unknown key released (translated set 2, code 0xee on isa0060/serio0). [ 1270.040000] atkbd.c: Use 'setkeycodes e06e ' to make it known. [ 1270.096000] atkbd.c: Unknown key pressed (translated set 2, code 0xee on isa0060/serio0). [ 1270.096000] atkbd.c: Use 'setkeycodes e06e ' to make it known. [ 1270.180000] atkbd.c: Unknown key released (translated set 2, code 0xee on isa0060/serio0). [ 1270.180000] atkbd.c: Use 'setkeycodes e06e ' to make it known. [ 1270.224000] atkbd.c: Unknown key pressed (translated set 2, code 0xee on isa0060/serio0). [ 1270.224000] atkbd.c: Use 'setkeycodes e06e ' to make it known. [ 1270.320000] atkbd.c: Unknown key released (translated set 2, code 0xee on isa0060/serio0). [ 1270.320000] atkbd.c: Use 'setkeycodes e06e ' to make it known. [ 1271.212000] atkbd.c: Unknown key released (translated set 2, code 0x55 on isa0060/serio0). [ 1271.212000] atkbd.c: Use 'setkeycodes 55 ' to make it known. [ 1451.424000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 1636.044000] atkbd.c: Unknown key pressed (translated set 2, code 0x55 on isa0060/serio0). [ 1636.044000] atkbd.c: Use 'setkeycodes 55 ' to make it known. [ 1637.960000] atkbd.c: Unknown key released (translated set 2, code 0x55 on isa0060/serio0). [ 1637.960000] atkbd.c: Use 'setkeycodes 55 ' to make it known. [ 1638.456000] atkbd.c: Unknown key pressed (translated set 2, code 0x55 on isa0060/serio0). [ 1638.456000] atkbd.c: Use 'setkeycodes 55 ' to make it known. [ 1639.632000] atkbd.c: Unknown key released (translated set 2, code 0x55 on isa0060/serio0). [ 1639.632000] atkbd.c: Use 'setkeycodes 55 ' to make it known. [ 1711.952000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 1711.952000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 1721.080000] atkbd.c: Unknown key pressed (translated set 2, code 0x55 on isa0060/serio0). [ 1721.080000] atkbd.c: Use 'setkeycodes 55 ' to make it known. [ 1723.952000] atkbd.c: Unknown key released (translated set 2, code 0x55 on isa0060/serio0). [ 1723.952000] atkbd.c: Use 'setkeycodes 55 ' to make it known.