[ 0.000000] Linux version 2.6.22-10-generic (buildd@palmer) (gcc version 4.1.3 20070812 (prerelease) (Ubuntu 4.1.2-15ubuntu2)) #1 SMP Wed Aug 22 08:11:52 GMT 2007 (Ubuntu 2.6.22-10.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f690000 (usable) [ 0.000000] BIOS-e820: 000000007f690000 - 000000007f69d000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f69d000 - 000000007f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 1142MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f7860 [ 0.000000] Entering add_active_range(0, 0, 521872) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 521872 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 521872 [ 0.000000] On node 0 totalpages: 521872 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2285 pages used for memmap [ 0.000000] HighMem zone: 290211 pages, LIFO batch:31 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F77B0, 0014 (r0 FSC ) [ 0.000000] ACPI: RSDT 7F6977BD, 0044 (r1 FSC PC 6040000 LTP 0) [ 0.000000] ACPI: FACP 7F69CE20, 0074 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: DSDT 7F69837D, 4AA3 (r1 UW____ F34_____ 6040000 INTL 20050624) [ 0.000000] ACPI: FACS 7F69DFC0, 0040 [ 0.000000] ACPI: APIC 7F69CE94, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 7F69CEFC, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 7F69CF34, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: APIC 7F69CF70, 0068 (r1 FSC PC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7F69CFD8, 0028 (r1 MSTEST TESTONLY 6040000 LTP 1) [ 0.000000] ACPI: SSDT 7F698173, 020A (r1 SataRe SataAhci 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F697801, 04F6 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] Built 1 zonelists. Total pages: 517795 [ 0.000000] Kernel command line: root=UUID=036f013d-e4bf-49e6-9a8c-e1fe5bd93bb9 ro quiet splash locale=pt_PT [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1662.601 MHz processor. [ 23.419112] Console: colour VGA+ 80x25 [ 23.419363] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 23.419721] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 23.541203] Memory: 2058172k/2087488k available (2010k kernel code, 28100k reserved, 917k data, 364k init, 1169984k highmem) [ 23.541214] virtual kernel memory layout: [ 23.541215] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 23.541216] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 23.541218] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 23.541219] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 23.541220] .init : 0xc03e1000 - 0xc043c000 ( 364 kB) [ 23.541222] .data : 0xc02f69c6 - 0xc03dbe64 ( 917 kB) [ 23.541223] .text : 0xc0100000 - 0xc02f69c6 (2010 kB) [ 23.541227] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 23.541267] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 23.541417] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 23.541422] hpet0: 3 64-bit timers, 14318180 Hz [ 23.622319] Calibrating delay using timer specific routine.. 3328.73 BogoMIPS (lpj=6657477) [ 23.622342] Security Framework v1.0.0 initialized [ 23.622351] SELinux: Disabled at boot. [ 23.622365] Mount-cache hash table entries: 512 [ 23.622493] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 23.622503] monitor/mwait feature present. [ 23.622505] using mwait in idle threads. [ 23.622510] CPU: L1 I cache: 32K, L1 D cache: 32K [ 23.622513] CPU: L2 cache: 2048K [ 23.622516] CPU: Physical Processor ID: 0 [ 23.622518] CPU: Processor Core ID: 0 [ 23.622520] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 [ 23.622529] Compat vDSO mapped to ffffe000. [ 23.622542] Checking 'hlt' instruction... OK. [ 23.638418] SMP alternatives: switching to UP code [ 23.638881] Early unpacking initramfs... done [ 23.983480] ACPI: Core revision 20070126 [ 23.983538] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 24.012443] CPU0: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 [ 24.012460] SMP alternatives: switching to SMP code [ 24.012567] Booting processor 1/1 eip 3000 [ 24.023861] Initializing CPU#1 [ 24.101578] Calibrating delay using timer specific routine.. 3325.07 BogoMIPS (lpj=6650144) [ 24.101585] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 24.101591] monitor/mwait feature present. [ 24.101594] CPU: L1 I cache: 32K, L1 D cache: 32K [ 24.101596] CPU: L2 cache: 2048K [ 24.101599] CPU: Physical Processor ID: 0 [ 24.101600] CPU: Processor Core ID: 1 [ 24.101602] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 [ 24.102118] CPU1: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 [ 24.102143] Total of 2 processors activated (6653.81 BogoMIPS). [ 24.102340] ENABLING IO-APIC IRQs [ 24.102547] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 24.249446] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 24.269435] Brought up 2 CPUs [ 24.330249] migration_cost=32 [ 24.330392] Booting paravirtualized kernel on bare hardware [ 24.330481] Time: 19:51:55 Date: 07/22/107 [ 24.330502] NET: Registered protocol family 16 [ 24.330589] EISA bus registered [ 24.330594] ACPI: bus type pci registered [ 24.369389] PCI: PCI BIOS revision 2.10 entry at 0xfd843, last bus=6 [ 24.369391] PCI: Using configuration type 1 [ 24.369393] Setting up standard PCI resources [ 24.373220] ACPI: EC: Look up EC in DSDT [ 24.373828] ACPI: EC: GPE=0x19, ports=0x66, 0x62 [ 24.375277] ACPI: System BIOS is requesting _OSI(Linux) [ 24.375280] ACPI: Please test with "acpi_osi=!Linux" [ 24.375282] Please send dmidecode to linux-acpi@vger.kernel.org [ 24.375826] ACPI: Interpreter enabled [ 24.375828] ACPI: (supports S0 S3 S4 S5) [ 24.375845] ACPI: Using IOAPIC for interrupt routing [ 24.381665] ACPI: EC: GPE=0x19, ports=0x66, 0x62 [ 24.381722] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 24.381735] PCI: Probing PCI hardware (bus 00) [ 24.382467] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 24.382472] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 24.383572] PCI: Transparent bridge - 0000:00:1e.0 [ 24.383647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 24.383965] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 24.384094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 24.384221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 24.384365] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 24.387470] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 24.387569] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 24.387666] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15) [ 24.387761] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 24.387857] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 24.387952] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 24.388048] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 24.388143] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 24.388264] Linux Plug and Play Support v0.97 (c) Adam Belay [ 24.388274] pnp: PnP ACPI init [ 24.388284] ACPI: bus type pnp registered [ 24.390049] pnp: PnP ACPI: found 11 devices [ 24.390052] ACPI: ACPI bus type pnp unregistered [ 24.390056] PnPBIOS: Disabled by ACPI PNP [ 24.390102] PCI: Using ACPI for IRQ routing [ 24.390105] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 24.390185] PCI: Cannot allocate resource region 0 of device 0000:05:00.0 [ 24.410155] NET: Registered protocol family 8 [ 24.410157] NET: Registered protocol family 20 [ 24.410228] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 24.410231] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 24.410235] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 24.410238] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 24.410245] pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 24.410255] pnp: 00:07: ioport range 0x6a0-0x6af has been reserved [ 24.410258] pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved [ 24.413107] Time: tsc clocksource has been installed. [ 24.413122] Switched to high resolution mode on CPU 0 [ 24.413210] Switched to high resolution mode on CPU 1 [ 24.440545] PCI: Bridge: 0000:00:1c.0 [ 24.440549] IO window: f000-ffff [ 24.440555] MEM window: fac00000-febfffff [ 24.440560] PREFETCH window: disabled. [ 24.440566] PCI: Bridge: 0000:00:1c.1 [ 24.440567] IO window: disabled. [ 24.440573] MEM window: disabled. [ 24.440577] PREFETCH window: disabled. [ 24.440595] PCI: Bridge: 0000:00:1c.2 [ 24.440597] IO window: disabled. [ 24.440603] MEM window: f7000000-f70fffff [ 24.440607] PREFETCH window: disabled. [ 24.440617] PCI: Bridge: 0000:00:1e.0 [ 24.440620] IO window: 2000-2fff [ 24.440626] MEM window: f0200000-f02fffff [ 24.440631] PREFETCH window: disabled. [ 24.440658] PCI: Enabling device 0000:00:1c.0 (0000 -> 0003) [ 24.440665] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 24.440674] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 24.440698] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 [ 24.440706] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 24.440728] PCI: Enabling device 0000:00:1c.2 (0000 -> 0002) [ 24.440733] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 24.440741] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 24.440755] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 24.440766] NET: Registered protocol family 2 [ 24.484986] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 24.485044] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 24.486122] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 24.486513] TCP: Hash tables configured (established 131072 bind 65536) [ 24.486516] TCP reno registered [ 24.501086] checking if image is initramfs... it is [ 25.185258] Freeing initrd memory: 7051k freed [ 25.185372] Simple Boot Flag at 0x35 set to 0x1 [ 25.185882] audit: initializing netlink socket (disabled) [ 25.185897] audit(1187812315.224:1): initialized [ 25.186002] highmem bounce pool size: 64 pages [ 25.188032] VFS: Disk quotas dquot_6.5.1 [ 25.188083] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 25.188179] io scheduler noop registered [ 25.188182] io scheduler anticipatory registered [ 25.188184] io scheduler deadline registered [ 25.188200] io scheduler cfq registered (default) [ 25.188210] Boot video device is 0000:00:02.0 [ 25.188382] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 25.188439] assign_interrupt_mode Found MSI capability [ 25.188488] Allocate Port Service[0000:00:1c.0:pcie00] [ 25.188524] Allocate Port Service[0000:00:1c.0:pcie02] [ 25.188620] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 25.188677] assign_interrupt_mode Found MSI capability [ 25.188722] Allocate Port Service[0000:00:1c.1:pcie00] [ 25.188753] Allocate Port Service[0000:00:1c.1:pcie02] [ 25.188854] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 25.188910] assign_interrupt_mode Found MSI capability [ 25.188956] Allocate Port Service[0000:00:1c.2:pcie00] [ 25.188987] Allocate Port Service[0000:00:1c.2:pcie02] [ 25.189187] isapnp: Scanning for PnP cards... [ 25.542610] isapnp: No Plug & Play device found [ 25.565580] Real Time Clock Driver v1.12ac [ 25.565823] hpet_resources: 0xfed00000 is busy [ 25.565850] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 25.566901] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 25.567122] input: Macintosh mouse button emulation as /class/input/input0 [ 25.567200] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 25.569833] i8042.c: Detected active multiplexing controller, rev 1.1. [ 25.570993] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 25.570998] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 25.571001] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 25.571004] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 25.571006] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 25.571179] mice: PS/2 mouse device common for all mice [ 25.571389] EISA: Probing bus 0 at eisa.0 [ 25.571397] Cannot allocate resource for EISA slot 1 [ 25.571401] Cannot allocate resource for EISA slot 2 [ 25.571429] EISA: Detected 0 cards. [ 25.571523] TCP cubic registered [ 25.571538] NET: Registered protocol family 1 [ 25.571561] Using IPI No-Shortcut mode [ 25.571725] Magic number: 3:22:901 [ 25.571804] hash matches device ptyve [ 25.572036] Freeing unused kernel memory: 364k freed [ 25.655217] input: AT Translated Set 2 keyboard as /class/input/input1 [ 26.783120] AppArmor: AppArmor initialized [ 26.783127] audit(1187812316.724:2): AppArmor initialized [ 26.783129] [ 26.786594] AppArmor: Registered secondary security module: capability. [ 26.786597] Capability LSM initialized as secondary [ 26.795955] ACPI: SSDT 7F697F42, 01A8 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 26.796164] ACPI: SSDT 7F697CF7, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 26.796427] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 26.796432] ACPI: Processor [CPU0] (supports 8 throttling states) [ 26.796676] ACPI: SSDT 7F6980EA, 0089 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 26.796868] ACPI: SSDT 7F697EBD, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 26.797154] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 26.797159] ACPI: Processor [CPU1] (supports 8 throttling states) [ 26.798493] ACPI: Thermal Zone [THRM] (62 C) [ 3.112000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.116000] Time: hpet clocksource has been installed. [ 3.556000] usbcore: registered new interface driver usbfs [ 3.556000] usbcore: registered new interface driver hub [ 3.556000] usbcore: registered new device driver usb [ 3.556000] USB Universal Host Controller Interface driver v3.0 [ 3.556000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 3.556000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.556000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.556000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.556000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820 [ 3.556000] usb usb1: configuration #1 chosen from 1 choice [ 3.556000] hub 1-0:1.0: USB hub found [ 3.556000] hub 1-0:1.0: 2 ports detected [ 3.660000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 [ 3.660000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.660000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.660000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 3.660000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840 [ 3.660000] usb usb2: configuration #1 chosen from 1 choice [ 3.660000] hub 2-0:1.0: USB hub found [ 3.660000] hub 2-0:1.0: 2 ports detected [ 3.672000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 3.688000] SCSI subsystem initialized [ 3.692000] libata version 2.21 loaded. [ 3.764000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 3.764000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.764000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.764000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 3.764000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 3.764000] usb usb3: configuration #1 chosen from 1 choice [ 3.764000] hub 3-0:1.0: USB hub found [ 3.764000] hub 3-0:1.0: 2 ports detected [ 3.868000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17 [ 3.868000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 3.868000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.868000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 3.868000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880 [ 3.868000] usb usb4: configuration #1 chosen from 1 choice [ 3.868000] hub 4-0:1.0: USB hub found [ 3.868000] hub 4-0:1.0: 2 ports detected [ 3.904000] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 3.972000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 [ 3.972000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 3.972000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.972000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 3.972000] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.972000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 3.972000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf0004000 [ 3.976000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.976000] usb usb5: configuration #1 chosen from 1 choice [ 3.976000] hub 5-0:1.0: USB hub found [ 3.976000] hub 5-0:1.0: 8 ports detected [ 4.000000] Clocksource tsc unstable (delta = -185219074 ns) [ 4.080000] 8139cp 0000:06:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 4.080000] 8139cp 0000:06:05.0: Try the "8139too" driver instead. [ 4.080000] ahci 0000:00:1f.2: version 2.2 [ 4.080000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 [ 4.080000] 8139too Fast Ethernet driver 0.9.28 [ 4.436000] usb 1-1: device not accepting address 2, error -71 [ 5.084000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode [ 5.084000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 5.084000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 5.084000] scsi0 : ahci [ 5.084000] scsi1 : ahci [ 5.084000] scsi2 : ahci [ 5.084000] scsi3 : ahci [ 5.084000] ata1: SATA max UDMA/133 cmd 0xf8862500 ctl 0x00000000 bmdma 0x00000000 irq 220 [ 5.084000] ata2: SATA max UDMA/133 cmd 0xf8862580 ctl 0x00000000 bmdma 0x00000000 irq 220 [ 5.084000] ata3: SATA max UDMA/133 cmd 0xf8862600 ctl 0x00000000 bmdma 0x00000000 irq 220 [ 5.084000] ata4: SATA max UDMA/133 cmd 0xf8862680 ctl 0x00000000 bmdma 0x00000000 irq 220 [ 5.168000] usb 1-1: new full speed USB device using uhci_hcd and address 4 [ 5.336000] usb 1-1: configuration #1 chosen from 1 choice [ 5.340000] hub 1-1:1.0: USB hub found [ 5.344000] hub 1-1:1.0: 4 ports detected [ 5.588000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.648000] ata1.00: ATA-7: WDC WD1200BEVS-07LAT0, 01.06M01, max UDMA/133 [ 5.648000] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 1) [ 5.648000] ata1.00: configured for UDMA/133 [ 5.660000] usb 1-1.4: new low speed USB device using uhci_hcd and address 5 [ 5.820000] usb 1-1.4: configuration #1 chosen from 1 choice [ 5.840000] usbcore: registered new interface driver hiddev [ 5.880000] input: HID 1241:1166 as /class/input/input2 [ 5.880000] input: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:1d.0-1.4 [ 5.880000] usbcore: registered new interface driver usbhid [ 5.880000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 5.964000] ata2: SATA link down (SStatus 0 SControl 0) [ 6.296000] ata3: SATA link down (SStatus 0 SControl 300) [ 6.644000] ata4: SATA link down (SStatus 0 SControl 0) [ 6.644000] scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-0 01.0 PQ: 0 ANSI: 5 [ 6.644000] ata_piix 0000:00:1f.1: version 2.11 [ 6.644000] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 20 [ 6.644000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 6.644000] scsi4 : ata_piix [ 6.644000] scsi5 : ata_piix [ 6.644000] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14 [ 6.644000] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15 [ 6.652000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 6.652000] sd 0:0:0:0: [sda] Write Protect is off [ 6.652000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.652000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.652000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 6.652000] sd 0:0:0:0: [sda] Write Protect is off [ 6.652000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.652000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.652000] sda: sda1 sda2 sda3 < sda5 sda6 > [ 6.752000] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.756000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.964000] ata5.00: ATAPI: HL-DT-ST DVD-RW GWA-4082N, CW02, max UDMA/33 [ 7.140000] ata5.00: configured for UDMA/33 [ 7.140000] ata6: port disabled. ignoring. [ 7.144000] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4082N CW02 PQ: 0 ANSI: 5 [ 7.144000] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 7.144000] PCI: Enabling device 0000:06:04.0 (0195 -> 0197) [ 7.144000] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 7.192000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f0200000-f02007ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 7.196000] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 7.196000] eth0: RealTek RTL8139 at 0xf8864c00, 00:03:0d:4f:63:2f, IRQ 17 [ 7.196000] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 7.208000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 7.208000] Uniform CD-ROM driver Revision: 3.20 [ 7.208000] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 7.232000] Attempting manual resume [ 7.232000] swsusp: Resume From Partition 8:6 [ 7.232000] PM: Checking swsusp image. [ 7.232000] PM: Resume from disk failed. [ 7.272000] kjournald starting. Commit interval 5 seconds [ 7.272000] EXT3-fs: mounted filesystem with ordered data mode. [ 8.468000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d0050036be2] [ 16.344000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 17.252000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 17.252000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 17.696000] Linux agpgart interface v0.102 (c) Dave Jones [ 17.748000] agpgart: Detected an Intel 945GM Chipset. [ 17.748000] agpgart: Detected 7932K stolen memory. [ 17.764000] agpgart: AGP aperture is 256M @ 0xc0000000 [ 17.920000] NET: Registered protocol family 17 [ 17.952000] iTCO_vendor_support: vendor-support=0 [ 17.960000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 17.960000] ieee80211_crypt: registered algorithm 'NULL' [ 17.960000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 17.960000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 18.032000] sdhci: Secure Digital Host Controller Interface driver [ 18.032000] sdhci: Copyright(c) Pierre Ossman [ 18.032000] sdhci: SDHCI controller found at 0000:06:04.2 [1217:7120] (rev 1) [ 18.032000] ACPI: PCI Interrupt 0000:06:04.2[A] -> GSI 18 (level, low) -> IRQ 18 [ 18.032000] sdhci:slot0: Unknown controller version (16). You may experience problems. [ 18.032000] mmc0: SDHCI at 0xb0300800 irq 18 PIO [ 18.076000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp [ 18.076000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 18.076000] PCI: Enabling device 0000:05:00.0 (0000 -> 0002) [ 18.076000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 18.076000] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 18.080000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 18.308000] input: PS/2 Logitech Wheel Mouse as /class/input/input3 [ 18.312000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 18.312000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 18.336000] intel_rng: FWH not detected [ 18.388000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 [ 18.388000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 18.764000] fuse init (API version 7.8) [ 18.796000] lp: driver loaded but no devices found [ 18.900000] Adding 2449872k swap on /dev/sda6. Priority:-1 extents:1 across:2449872k [ 19.284000] EXT3 FS on sda2, internal journal [ 19.940000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels) [ 20.028000] kjournald starting. Commit interval 5 seconds [ 20.028000] EXT3 FS on sda5, internal journal [ 20.028000] EXT3-fs: mounted filesystem with ordered data mode. [ 20.788000] AppArmor: Unregistered secondary security module: capability