[ 0.000000] Linux version 2.6.22-12-generic (buildd@rothera) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Thu Sep 20 18:51:18 GMT 2007 (Ubuntu 2.6.22-12.36-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe92400 (usable) [ 0.000000] BIOS-e820: 000000007fe92400 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 523922) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 523922 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 523922 [ 0.000000] On node 0 totalpages: 523922 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292245 pages, LIFO batch:31 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FBBF0, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT 7FE93E00, 005C (r1 DELL M08 27D70615 ASL 61) [ 0.000000] ACPI: FACP 7FE93C9C, 00F4 (r4 DELL M08 27D70615 ASL 61) [ 0.000000] ACPI: DSDT 7FE94400, 56F0 (r2 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 7FEA2C00, 0040 [ 0.000000] ACPI: HPET 7FE93F00, 0038 (r1 DELL M08 1 ASL 61) [ 0.000000] ACPI: APIC 7FE94000, 0068 (r1 DELL M08 27D70615 ASL 47) [ 0.000000] ACPI: MCFG 7FE93FC0, 003E (r16 DELL M08 27D70615 ASL 61) [ 0.000000] ACPI: SLIC 7FE9409C, 0176 (r1 DELL M08 27D70615 ASL 61) [ 0.000000] ACPI: BOOT 7FE93BC0, 0028 (r1 DELL M08 27D70615 ASL 61) [ 0.000000] ACPI: SSDT 7FE926EB, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:74000000) [ 0.000000] Built 1 zonelists. Total pages: 519829 [ 0.000000] Kernel command line: root=UUID=4e7f5dd8-733a-4e51-8430-26314e8ba7ac ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2194.566 MHz processor. [ 10.155319] Console: colour VGA+ 80x25 [ 10.155619] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 10.155890] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 10.218788] Memory: 2066220k/2095688k available (2017k kernel code, 28184k reserved, 918k data, 364k init, 1178184k highmem) [ 10.218795] virtual kernel memory layout: [ 10.218796] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 10.218797] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 10.218798] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 10.218799] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 10.218799] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 10.218800] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB) [ 10.218801] .text : 0xc0100000 - 0xc02f8456 (2017 kB) [ 10.218803] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 10.218834] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 10.218953] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 10.218957] hpet0: 3 64-bit timers, 14318180 Hz [ 10.299869] Calibrating delay using timer specific routine.. 4393.73 BogoMIPS (lpj=8787475) [ 10.299889] Security Framework v1.0.0 initialized [ 10.299895] SELinux: Disabled at boot. [ 10.299905] Mount-cache hash table entries: 512 [ 10.300009] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 10.300015] monitor/mwait feature present. [ 10.300017] using mwait in idle threads. [ 10.300020] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.300022] CPU: L2 cache: 4096K [ 10.300024] CPU: Physical Processor ID: 0 [ 10.300025] CPU: Processor Core ID: 0 [ 10.300027] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 10.300035] Compat vDSO mapped to ffffe000. [ 10.300046] Checking 'hlt' instruction... OK. [ 10.315937] SMP alternatives: switching to UP code [ 10.316282] Early unpacking initramfs... done [ 10.567106] ACPI: Core revision 20070126 [ 10.567142] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 10.570436] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a [ 10.570449] SMP alternatives: switching to SMP code [ 10.570509] Booting processor 1/1 eip 3000 [ 10.580880] Initializing CPU#1 [ 10.659383] Calibrating delay using timer specific routine.. 4388.96 BogoMIPS (lpj=8777933) [ 10.659388] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 10.659392] monitor/mwait feature present. [ 10.659394] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.659396] CPU: L2 cache: 4096K [ 10.659398] CPU: Physical Processor ID: 0 [ 10.659399] CPU: Processor Core ID: 1 [ 10.659400] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 10.660029] CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a [ 10.660049] Total of 2 processors activated (8782.70 BogoMIPS). [ 10.660244] ENABLING IO-APIC IRQs [ 10.660440] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 10.807258] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 10.827243] Brought up 2 CPUs [ 10.960954] migration_cost=12 [ 10.961056] Booting paravirtualized kernel on bare hardware [ 10.961139] Time: 13:59:05 Date: 08/22/107 [ 10.961154] NET: Registered protocol family 16 [ 10.961219] EISA bus registered [ 10.961223] ACPI: bus type pci registered [ 10.971762] PCI: PCI BIOS revision 2.10 entry at 0xfad46, last bus=14 [ 10.971763] PCI: Using configuration type 1 [ 10.971764] Setting up standard PCI resources [ 10.978461] ACPI: EC: Look up EC in DSDT [ 11.014387] ACPI: SSDT 7FEA2C80, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) [ 11.014529] ACPI: Interpreter enabled [ 11.014532] ACPI: (supports S0 S3 S4 S5) [ 11.014543] ACPI: Using IOAPIC for interrupt routing [ 11.033383] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 11.033395] PCI: Probing PCI hardware (bus 00) [ 11.035756] PCI: Transparent bridge - 0000:00:1e.0 [ 11.035855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 11.036208] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 11.036329] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 11.036411] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 11.036507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 11.036602] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 11.036695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 11.045926] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7 [ 11.046023] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 11.046114] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 [ 11.046205] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) [ 11.046296] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 11.046389] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 11.046482] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 11.046566] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 11.046668] Linux Plug and Play Support v0.97 (c) Adam Belay [ 11.046678] pnp: PnP ACPI init [ 11.046685] ACPI: bus type pnp registered [ 11.080376] pnp: PnP ACPI: found 12 devices [ 11.080378] ACPI: ACPI bus type pnp unregistered [ 11.080380] PnPBIOS: Disabled by ACPI PNP [ 11.080412] PCI: Using ACPI for IRQ routing [ 11.080414] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 11.140655] NET: Registered protocol family 8 [ 11.140656] NET: Registered protocol family 20 [ 11.140700] pnp: 00:05: ioport range 0xc80-0xcff could not be reserved [ 11.140705] pnp: 00:08: iomem range 0xfed00000-0xfed003ff has been reserved [ 11.140709] pnp: 00:09: ioport range 0x900-0x97f has been reserved [ 11.140711] pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 11.140713] pnp: 00:09: ioport range 0x1000-0x1005 has been reserved [ 11.140715] pnp: 00:09: ioport range 0x1008-0x100f has been reserved [ 11.140719] pnp: 00:0a: ioport range 0xf400-0xf4fe has been reserved [ 11.140721] pnp: 00:0a: ioport range 0x1006-0x1007 has been reserved [ 11.140724] pnp: 00:0a: ioport range 0x100a-0x1059 could not be reserved [ 11.140726] pnp: 00:0a: ioport range 0x1060-0x107f has been reserved [ 11.140728] pnp: 00:0a: ioport range 0x1080-0x10bf has been reserved [ 11.140730] pnp: 00:0a: ioport range 0x10c0-0x10df has been reserved [ 11.140732] pnp: 00:0a: ioport range 0x1010-0x102f has been reserved [ 11.140736] pnp: 00:0b: iomem range 0x0-0x9efff could not be reserved [ 11.140738] pnp: 00:0b: iomem range 0x9f000-0x9ffff could not be reserved [ 11.140740] pnp: 00:0b: iomem range 0xc0000-0xcffff could not be reserved [ 11.140742] pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 11.142739] Time: tsc clocksource has been installed. [ 11.142745] Switched to high resolution mode on CPU 0 [ 11.142814] Switched to high resolution mode on CPU 1 [ 11.170938] PCI: Bridge: 0000:00:01.0 [ 11.170940] IO window: e000-efff [ 11.170943] MEM window: fa000000-feafffff [ 11.170946] PREFETCH window: e0000000-efffffff [ 11.170949] PCI: Bridge: 0000:00:1c.0 [ 11.170950] IO window: disabled. [ 11.170955] MEM window: disabled. [ 11.170959] PREFETCH window: disabled. [ 11.170965] PCI: Bridge: 0000:00:1c.1 [ 11.170966] IO window: disabled. [ 11.170972] MEM window: f9f00000-f9ffffff [ 11.170976] PREFETCH window: disabled. [ 11.170981] PCI: Bridge: 0000:00:1c.3 [ 11.170984] IO window: d000-dfff [ 11.170990] MEM window: f9c00000-f9efffff [ 11.170994] PREFETCH window: f0000000-f01fffff [ 11.171000] PCI: Bridge: 0000:00:1c.5 [ 11.171001] IO window: disabled. [ 11.171006] MEM window: f9b00000-f9bfffff [ 11.171011] PREFETCH window: disabled. [ 11.171016] PCI: Bridge: 0000:00:1e.0 [ 11.171017] IO window: disabled. [ 11.171023] MEM window: f9a00000-f9afffff [ 11.171027] PREFETCH window: disabled. [ 11.171041] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 11.171045] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 11.171067] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 11.171072] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 11.171096] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 11.171101] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 11.171124] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 [ 11.171130] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 11.171152] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 11.171157] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 11.171171] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 11.171179] NET: Registered protocol family 2 [ 11.218611] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 11.218655] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 11.219150] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 11.219312] TCP: Hash tables configured (established 131072 bind 65536) [ 11.219314] TCP reno registered [ 11.234669] checking if image is initramfs... it is [ 11.728426] Freeing initrd memory: 7061k freed [ 11.728520] Simple Boot Flag at 0x79 set to 0x1 [ 11.728883] audit: initializing netlink socket (disabled) [ 11.728897] audit(1190469545.300:1): initialized [ 11.728971] highmem bounce pool size: 64 pages [ 11.730375] VFS: Disk quotas dquot_6.5.1 [ 11.730412] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 11.730481] io scheduler noop registered [ 11.730483] io scheduler anticipatory registered [ 11.730485] io scheduler deadline registered [ 11.730494] io scheduler cfq registered (default) [ 11.730626] Boot video device is 0000:01:00.0 [ 11.730696] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 11.730729] assign_interrupt_mode Found MSI capability [ 11.730756] Allocate Port Service[0000:00:01.0:pcie00] [ 11.730781] Allocate Port Service[0000:00:01.0:pcie02] [ 11.730846] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 11.730904] assign_interrupt_mode Found MSI capability [ 11.730950] Allocate Port Service[0000:00:1c.0:pcie00] [ 11.730972] Allocate Port Service[0000:00:1c.0:pcie02] [ 11.731068] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 11.731126] assign_interrupt_mode Found MSI capability [ 11.731171] Allocate Port Service[0000:00:1c.1:pcie00] [ 11.731194] Allocate Port Service[0000:00:1c.1:pcie02] [ 11.731284] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 11.731342] assign_interrupt_mode Found MSI capability [ 11.731388] Allocate Port Service[0000:00:1c.3:pcie00] [ 11.731412] Allocate Port Service[0000:00:1c.3:pcie02] [ 11.731502] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 11.731560] assign_interrupt_mode Found MSI capability [ 11.731605] Allocate Port Service[0000:00:1c.5:pcie00] [ 11.731628] Allocate Port Service[0000:00:1c.5:pcie02] [ 11.731795] isapnp: Scanning for PnP cards... [ 12.085359] isapnp: No Plug & Play device found [ 12.100207] Real Time Clock Driver v1.12ac [ 12.100321] hpet_resources: 0xfed00000 is busy [ 12.100374] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 12.101148] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 12.101243] input: Macintosh mouse button emulation as /class/input/input0 [ 12.101300] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 12.104709] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 12.104712] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 12.104822] mice: PS/2 mouse device common for all mice [ 12.104901] EISA: Probing bus 0 at eisa.0 [ 12.104908] Cannot allocate resource for EISA slot 1 [ 12.104939] EISA: Detected 0 cards. [ 12.104997] TCP cubic registered [ 12.105007] NET: Registered protocol family 1 [ 12.105022] Using IPI No-Shortcut mode [ 12.105159] Magic number: 7:492:989 [ 12.105163] hash matches device ttyd2 [ 12.105384] Freeing unused kernel memory: 364k freed [ 12.108392] input: AT Translated Set 2 keyboard as /class/input/input1 [ 13.260256] AppArmor: AppArmor initialized<5>audit(1190469546.800:2): type=1505 info="AppArmor initialized" pid=1276 [ 13.266024] fuse init (API version 7.8) [ 13.269987] Failure registering capabilities with primary security module. [ 13.302556] ACPI: SSDT 7FE930F2, 0286 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 13.302715] ACPI: SSDT 7FE92BB7, 04B6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 13.302928] Monitor-Mwait will be used to enter C-1 state [ 13.302931] Monitor-Mwait will be used to enter C-2 state [ 13.302933] Monitor-Mwait will be used to enter C-3 state [ 13.302936] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 13.302940] ACPI: Processor [CPU0] (supports 8 throttling states) [ 13.303108] ACPI: SSDT 7FE93378, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 13.303255] ACPI: SSDT 7FE9306D, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 13.303498] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 13.303502] ACPI: Processor [CPU1] (supports 8 throttling states) [ 2.964000] Marking TSC unstable due to: possible TSC halt in C2. [ 2.968000] Time: hpet clocksource has been installed. [ 2.968000] ACPI: Thermal Zone [THM] (50 C) [ 3.336000] usbcore: registered new interface driver usbfs [ 3.336000] usbcore: registered new interface driver hub [ 3.348000] usbcore: registered new device driver usb [ 3.356000] tg3.c:v3.77 (May 31, 2007) [ 3.356000] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 3.356000] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 3.356000] SCSI subsystem initialized [ 3.364000] USB Universal Host Controller Interface driver v3.0 [ 3.364000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 3.364000] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 3.364000] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.364000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.364000] uhci_hcd 0000:00:1a.0: irq 19, io base 0x00006f20 [ 3.364000] usb usb1: configuration #1 chosen from 1 choice [ 3.364000] hub 1-0:1.0: USB hub found [ 3.364000] hub 1-0:1.0: 2 ports detected [ 3.364000] libata version 2.21 loaded. [ 3.468000] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 3.468000] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 3.468000] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.468000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 3.468000] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00006f00 [ 3.468000] usb usb2: configuration #1 chosen from 1 choice [ 3.468000] hub 2-0:1.0: USB hub found [ 3.468000] hub 2-0:1.0: 2 ports detected [ 3.824000] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 3.856000] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:15:c5:7c:bb:d8 [ 3.856000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0] [ 3.856000] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 3.856000] ahci 0000:00:1f.2: version 2.2 [ 3.856000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 3.856000] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x5) don't match [ 4.000000] Clocksource tsc unstable (delta = -415667520 ns) [ 4.024000] usb 1-2: configuration #1 chosen from 1 choice [ 4.028000] hub 1-2:1.0: USB hub found [ 4.028000] hub 1-2:1.0: 3 ports detected [ 4.340000] usb 1-2.1: new full speed USB device using uhci_hcd and address 3 [ 4.460000] usb 1-2.1: configuration #1 chosen from 1 choice [ 4.672000] usb 1-2.2: new full speed USB device using uhci_hcd and address 4 [ 4.796000] usb 1-2.2: configuration #1 chosen from 1 choice [ 4.860000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode [ 4.860000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 4.860000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 4.860000] scsi0 : ahci [ 4.860000] scsi1 : ahci [ 4.860000] scsi2 : ahci [ 4.860000] ata1: SATA max UDMA/133 cmd 0xf8854900 ctl 0x00000000 bmdma 0x00000000 irq 218 [ 4.860000] ata2: DUMMY [ 4.860000] ata3: SATA max UDMA/133 cmd 0xf8854a00 ctl 0x00000000 bmdma 0x00000000 irq 218 [ 5.000000] usb 1-2.3: new full speed USB device using uhci_hcd and address 5 [ 5.124000] usb 1-2.3: configuration #1 chosen from 1 choice [ 5.356000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.672000] ata1.00: ATA-7: TOSHIBA MK1637GSX, DL040D, max UDMA/100 [ 5.672000] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32) [ 5.672000] ata1.00: configured for UDMA/100 [ 5.984000] ata3: SATA link down (SStatus 0 SControl 300) [ 5.984000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1637GS DL04 PQ: 0 ANSI: 5 [ 5.984000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 6.036000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 6.036000] sd 0:0:0:0: [sda] Write Protect is off [ 6.036000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.036000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.036000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 6.036000] sd 0:0:0:0: [sda] Write Protect is off [ 6.036000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.036000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.036000] sda:<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f9aff800-f9afffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 6.040000] ata_piix 0000:00:1f.1: version 2.11 [ 6.040000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 6.040000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 6.040000] scsi3 : ata_piix [ 6.040000] scsi4 : ata_piix [ 6.040000] ata4: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00016fa0 irq 14 [ 6.040000] ata5: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00016fa8 irq 15 [ 6.072000] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 6.116000] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.120000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.360000] ata4.00: ATAPI: MATSHITA DVD+/-RW UJ-857G, Z111, max UDMA/33 [ 6.532000] ata4.00: configured for UDMA/33 [ 6.532000] ata5: port disabled. ignoring. [ 6.532000] scsi 3:0:0:0: CD-ROM MATSHITA DVD+-RW UJ-857G Z111 PQ: 0 ANSI: 5 [ 6.532000] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 6.536000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 21 [ 6.536000] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 6.536000] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 6.536000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 6.536000] ehci_hcd 0000:00:1a.7: debug port 1 [ 6.536000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 6.536000] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xfed1c400 [ 6.540000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 6.540000] usb usb3: configuration #1 chosen from 1 choice [ 6.540000] hub 3-0:1.0: USB hub found [ 6.540000] hub 3-0:1.0: 4 ports detected [ 6.548000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy [ 6.548000] Uniform CD-ROM driver Revision: 3.20 [ 6.548000] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 6.616000] Attempting manual resume [ 6.616000] swsusp: Resume From Partition 8:7 [ 6.616000] PM: Checking swsusp image. [ 6.620000] PM: Resume from disk failed. [ 6.636000] kjournald starting. Commit interval 5 seconds [ 6.636000] EXT3-fs: mounted filesystem with ordered data mode. [ 6.644000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 [ 6.644000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 6.644000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 6.644000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 6.644000] ehci_hcd 0000:00:1d.7: debug port 1 [ 6.644000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 6.644000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfed1c000 [ 6.648000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 6.648000] usb usb4: configuration #1 chosen from 1 choice [ 6.648000] hub 4-0:1.0: USB hub found [ 6.648000] hub 4-0:1.0: 6 ports detected [ 6.752000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 6.752000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 6.752000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 6.752000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 6.752000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00006f80 [ 6.752000] usb usb5: configuration #1 chosen from 1 choice [ 6.752000] hub 5-0:1.0: USB hub found [ 6.752000] hub 5-0:1.0: 2 ports detected [ 6.856000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 6.856000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 6.856000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 6.856000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 6.856000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006f60 [ 6.856000] usb usb6: configuration #1 chosen from 1 choice [ 6.856000] hub 6-0:1.0: USB hub found [ 6.856000] hub 6-0:1.0: 2 ports detected [ 6.884000] usb 1-2: USB disconnect, address 2 [ 6.884000] usb 1-2.1: USB disconnect, address 3 [ 6.884000] usb 1-2.2: USB disconnect, address 4 [ 6.884000] usb 1-2.3: USB disconnect, address 5 [ 6.960000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 6.960000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 6.960000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 6.960000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 6.960000] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006f40 [ 6.960000] usb usb7: configuration #1 chosen from 1 choice [ 6.960000] hub 7-0:1.0: USB hub found [ 6.960000] hub 7-0:1.0: 2 ports detected [ 7.128000] usb 1-2: new full speed USB device using uhci_hcd and address 6 [ 7.312000] usb 1-2: configuration #1 chosen from 1 choice [ 7.312000] hub 1-2:1.0: USB hub found [ 7.316000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[424fc0003bc80870] [ 7.316000] hub 1-2:1.0: 3 ports detected [ 8.092000] usb 4-6: new high speed USB device using ehci_hcd and address 4 [ 8.228000] usb 4-6: configuration #1 chosen from 1 choice [ 8.472000] usb 5-2: new low speed USB device using uhci_hcd and address 2 [ 8.628000] usb 5-2: configuration #1 chosen from 1 choice [ 8.876000] usb 7-1: new full speed USB device using uhci_hcd and address 2 [ 9.060000] usb 7-1: configuration #1 chosen from 1 choice [ 9.400000] usb 1-2.1: new full speed USB device using uhci_hcd and address 7 [ 9.536000] usb 1-2.1: configuration #1 chosen from 1 choice [ 9.740000] usb 1-2.2: new full speed USB device using uhci_hcd and address 8 [ 9.872000] usb 1-2.2: configuration #1 chosen from 1 choice [ 10.076000] usb 1-2.3: new full speed USB device using uhci_hcd and address 9 [ 10.208000] usb 1-2.3: configuration #1 chosen from 1 choice [ 15.812000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 15.816000] Linux agpgart interface v0.102 (c) Dave Jones [ 15.888000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.992000] input: PC Speaker as /class/input/input2 [ 16.236000] Bluetooth: Core ver 2.11 [ 16.236000] NET: Registered protocol family 31 [ 16.236000] Bluetooth: HCI device and connection manager initialized [ 16.236000] Bluetooth: HCI socket layer initialized [ 16.264000] sdhci: Secure Digital Host Controller Interface driver [ 16.264000] sdhci: Copyright(c) Pierre Ossman [ 16.264000] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 22) [ 16.264000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 22 [ 16.264000] mmc0: SDHCI at 0xf9aff400 irq 22 DMA [ 16.300000] nvidia: module license 'NVIDIA' taints kernel. [ 16.552000] Bluetooth: HCI USB driver ver 2.9 [ 16.556000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 16.556000] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 16.556000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9639 Mon Apr 16 20:20:06 PDT 2007 [ 16.560000] usbcore: registered new interface driver hci_usb [ 16.560000] usbcore: registered new interface driver hiddev [ 16.576000] input: HID 062a:0000 as /class/input/input3 [ 16.576000] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.0-2 [ 16.588000] input: Broadcom Corp as /class/input/input4 [ 16.588000] input: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2 [ 16.592000] input: Broadcom Corp as /class/input/input5 [ 16.592000] input: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3 [ 16.592000] usbcore: registered new interface driver usbhid [ 16.592000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 16.600000] Linux video capture interface: v2.00 [ 16.652000] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.0 [ 16.652000] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 16.652000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 16.652000] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 16.652000] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 16.696000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04753/0x200000 [ 16.704000] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) [ 16.704000] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). [ 16.704000] uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26). [ 16.704000] uvcvideo: Failed to initialize the device (-5). [ 16.704000] usbcore: registered new interface driver uvcvideo [ 16.704000] USB Video Class driver (v0.1.0) [ 16.732000] input: SynPS/2 Synaptics TouchPad as /class/input/input6 [ 16.864000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 16.864000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 17.032000] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels [ 17.032000] wmaster0: Selected rate control algorithm 'iwl-4965-rs' [ 17.472000] lp: driver loaded but no devices found [ 17.584000] Adding 995988k swap on /dev/sda7. Priority:-1 extents:1 across:995988k [ 17.972000] EXT3 FS on sda6, internal journal [ 18.540000] kjournald starting. Commit interval 5 seconds [ 18.540000] EXT3 FS on sda8, internal journal [ 18.540000] EXT3-fs: mounted filesystem with ordered data mode.