[ 0.000000] Linux version 2.6.22-6-generic (buildd@rothera) (gcc version 4.1.3 20070528 (prerelease) (Ubuntu 4.1.2-9ubuntu2)) #1 SMP Fri Jun 1 19:24:12 GMT 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007d5b0000 (usable) [ 0.000000] BIOS-e820: 000000007d5b0000 - 000000007d5be000 (ACPI data) [ 0.000000] BIOS-e820: 000000007d5be000 - 000000007d5f0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007d5f0000 - 000000007d600000 (reserved) [ 0.000000] BIOS-e820: 00000000fed90000 - 00000000fed94000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffa6f000 - 00000000ffa70000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 1109MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 513456) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 513456 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 513456 [ 0.000000] On node 0 totalpages: 513456 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2219 pages used for memmap [ 0.000000] HighMem zone: 281861 pages, LIFO batch:31 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F9990, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 7D5B0000, 0048 (r1 A M I OEMRSDT 5000708 MSFT 97) [ 0.000000] ACPI: FACP 7D5B0200, 0084 (r2 A M I OEMFACP 5000708 MSFT 97) [ 0.000000] ACPI: DSDT 7D5B0490, 6643 (r1 SDBLI9 SDBLI944 44 INTL 20051117) [ 0.000000] ACPI: FACS 7D5BE000, 0040 [ 0.000000] ACPI: APIC 7D5B0390, 006C (r1 A M I OEMAPIC 5000708 MSFT 97) [ 0.000000] ACPI: MCFG 7D5B0450, 003C (r1 A M I OEMMCFG 5000708 MSFT 97) [ 0.000000] ACPI: OEMB 7D5BE040, 0079 (r1 A M I AMI_OEM 5000708 MSFT 97) [ 0.000000] ACPI: ASF! 7D5B6AE0, 0099 (r32 LEGEND I865PASF 1 INTL 20051117) [ 0.000000] ACPI: GSCI 7D5BE0C0, 2024 (r1 A M I GMCHSCI 5000708 MSFT 97) [ 0.000000] ACPI: iEIT 7D5C00F0, 00B0 (r1 A M I EITTABLE 5000708 MSFT 97) [ 0.000000] ACPI: DMAR 7D5B6B80, 0110 (r1 A M I OEMDMAR 1 MSFT 97) [ 0.000000] ACPI: SSDT 7D5C0BC0, 0877 (r1 DpgPmm CpuPm 12 INTL 20051117) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7d600000:81790000) [ 0.000000] Built 1 zonelists. Total pages: 509445 [ 0.000000] Kernel command line: root=UUID=7e0b1b99-5a51-407f-b12f-673ebb64924b ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2992.733 MHz processor. [ 29.696313] Console: colour VGA+ 80x25 [ 29.696542] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 29.696745] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 29.743373] Memory: 2024960k/2053824k available (2002k kernel code, 27584k reserved, 913k data, 360k init, 1136320k highmem) [ 29.743378] virtual kernel memory layout: [ 29.743379] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 29.743379] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 29.743380] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 29.743381] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 29.743381] .init : 0xc03df000 - 0xc0439000 ( 360 kB) [ 29.743382] .data : 0xc02f4a8a - 0xc03d90d4 ( 913 kB) [ 29.743382] .text : 0xc0100000 - 0xc02f4a8a (2002 kB) [ 29.743384] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 29.743406] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, Processors=2, Nodes=1 [ 29.823394] Calibrating delay using timer specific routine.. 5992.09 BogoMIPS (lpj=11984180) [ 29.823410] Security Framework v1.0.0 initialized [ 29.823415] SELinux: Disabled at boot. [ 29.823423] Mount-cache hash table entries: 512 [ 29.823499] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3fd 00000000 00000001 [ 29.823504] monitor/mwait feature present. [ 29.823505] using mwait in idle threads. [ 29.823508] CPU: L1 I cache: 32K, L1 D cache: 32K [ 29.823510] CPU: L2 cache: 4096K [ 29.823511] CPU: Physical Processor ID: 0 [ 29.823512] CPU: Processor Core ID: 0 [ 29.823513] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3fd 00000000 00000001 [ 29.823519] Compat vDSO mapped to ffffe000. [ 29.823526] Checking 'hlt' instruction... OK. [ 29.839467] SMP alternatives: switching to UP code [ 29.839691] ACPI: Core revision 20070126 [ 29.864354] CPU0: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz stepping 0b [ 29.864365] SMP alternatives: switching to SMP code [ 29.864375] Booting processor 1/1 eip 3000 [ 29.874844] Initializing CPU#1 [ 29.951330] Calibrating delay using timer specific routine.. 5985.39 BogoMIPS (lpj=11970798) [ 29.951334] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3fd 00000000 00000001 [ 29.951336] monitor/mwait feature present. [ 29.951338] CPU: L1 I cache: 32K, L1 D cache: 32K [ 29.951339] CPU: L2 cache: 4096K [ 29.951340] CPU: Physical Processor ID: 0 [ 29.951341] CPU: Processor Core ID: 1 [ 29.951342] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3fd 00000000 00000001 [ 29.951828] CPU1: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz stepping 0b [ 29.951847] Total of 2 processors activated (11977.48 BogoMIPS). [ 29.952062] ENABLING IO-APIC IRQs [ 29.952255] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 30.099330] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 30.119330] Brought up 2 CPUs [ 30.190245] migration_cost=18 [ 30.190325] Booting paravirtualized kernel on bare hardware [ 30.190400] Time: 8:59:13 Date: 05/08/107 [ 30.190412] NET: Registered protocol family 16 [ 30.190458] EISA bus registered [ 30.190460] ACPI: bus type pci registered [ 30.190470] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved [ 30.190527] PCI: Not using MMCONFIG. [ 30.190712] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=1 [ 30.190713] PCI: Using configuration type 1 [ 30.190714] Setting up standard PCI resources [ 30.195870] ACPI: Interpreter enabled [ 30.195872] ACPI: (supports S0 S1 S3 S4 S5) [ 30.195883] ACPI: Using IOAPIC for interrupt routing [ 30.195987] Error attaching device data [ 30.196008] Error attaching device data [ 30.196031] Error attaching device data [ 30.196053] Error attaching device data [ 30.202847] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 30.202858] PCI: Probing PCI hardware (bus 00) [ 30.203885] PCI: Transparent bridge - 0000:00:1e.0 [ 30.203910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 30.204012] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 30.217282] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15) [ 30.217372] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12 14 *15) [ 30.217461] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 12 14 15) [ 30.217549] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12 14 15) [ 30.217637] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 *14 15) [ 30.217728] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 12 14 15) [ 30.217815] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12 14 15) [ 30.217902] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12 14 *15) [ 30.217973] Linux Plug and Play Support v0.97 (c) Adam Belay [ 30.217979] pnp: PnP ACPI init [ 30.217983] ACPI: bus type pnp registered [ 30.221716] pnp: PnP ACPI: found 23 devices [ 30.221717] ACPI: ACPI bus type pnp unregistered [ 30.221720] PnPBIOS: Disabled by ACPI PNP [ 30.221745] PCI: Using ACPI for IRQ routing [ 30.221747] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 30.229548] NET: Registered protocol family 8 [ 30.229549] NET: Registered protocol family 20 [ 30.229576] pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 30.229581] pnp: 00:0a: ioport range 0xa20-0xa3f has been reserved [ 30.229582] pnp: 00:0a: ioport range 0xa00-0xa0f has been reserved [ 30.229583] pnp: 00:0a: ioport range 0xa10-0xa1f has been reserved [ 30.229585] pnp: 00:0a: ioport range 0xa40-0xa5f has been reserved [ 30.229588] pnp: 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 30.229589] pnp: 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved [ 30.229593] pnp: 00:0e: iomem range 0xffc00000-0xffefffff could not be reserved [ 30.229596] pnp: 00:0f: iomem range 0xfec00000-0xfec00fff has been reserved [ 30.229598] pnp: 00:0f: iomem range 0xfee00000-0xfee00fff could not be reserved [ 30.229600] pnp: 00:10: iomem range 0xe0000000-0xefffffff has been reserved [ 30.229603] pnp: 00:11: iomem range 0xffa6f000-0xffa6ffff could not be reserved [ 30.229606] pnp: 00:12: iomem range 0xfed90000-0xfed90fff could not be reserved [ 30.229608] pnp: 00:13: iomem range 0xfed91000-0xfed91fff could not be reserved [ 30.229611] pnp: 00:14: iomem range 0xfed92000-0xfed92fff could not be reserved [ 30.229614] pnp: 00:15: iomem range 0xfed93000-0xfed93fff could not be reserved [ 30.229617] pnp: 00:16: iomem range 0x0-0x9ffff could not be reserved [ 30.229618] pnp: 00:16: iomem range 0xc0000-0xcffff could not be reserved [ 30.229620] pnp: 00:16: iomem range 0xe0000-0xfffff could not be reserved [ 30.229621] pnp: 00:16: iomem range 0x100000-0x7d5fffff could not be reserved [ 30.231213] Time: tsc clocksource has been installed. [ 30.259771] PCI: Bridge: 0000:00:1e.0 [ 30.259772] IO window: disabled. [ 30.259780] MEM window: disabled. [ 30.259783] PREFETCH window: disabled. [ 30.259797] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 30.259805] NET: Registered protocol family 2 [ 30.299351] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 30.299387] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 30.299786] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 30.299911] TCP: Hash tables configured (established 131072 bind 65536) [ 30.299912] TCP reno registered [ 30.311461] checking if image is initramfs... it is [ 30.660240] Freeing initrd memory: 6803k freed [ 30.660535] audit: initializing netlink socket (disabled) [ 30.660544] audit(1181293153.348:1): initialized [ 30.660595] highmem bounce pool size: 64 pages [ 30.661583] VFS: Disk quotas dquot_6.5.1 [ 30.661608] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 30.661658] io scheduler noop registered [ 30.661659] io scheduler anticipatory registered [ 30.661660] io scheduler deadline registered [ 30.661667] io scheduler cfq registered (default) [ 30.661673] Boot video device is 0000:00:02.0 [ 30.661891] isapnp: Scanning for PnP cards... [ 30.763098] Switched to high resolution mode on CPU 0 [ 30.763137] Switched to high resolution mode on CPU 1 [ 31.019853] isapnp: No Plug & Play device found [ 31.030339] Real Time Clock Driver v1.12ac [ 31.030408] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 31.030760] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 31.030949] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 31.031046] ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 16 [ 31.031091] 0000:00:03.3: ttyS2 at I/O 0xe000 (irq = 16) is a 16550A [ 31.031403] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 31.031513] input: Macintosh mouse button emulation as /class/input/input0 [ 31.031577] PNP: No PS/2 controller found. Probing ports directly. [ 31.034583] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 31.034586] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 31.034643] mice: PS/2 mouse device common for all mice [ 31.034691] EISA: Probing bus 0 at eisa.0 [ 31.034726] EISA: Detected 0 cards. [ 31.034767] TCP cubic registered [ 31.034775] NET: Registered protocol family 1 [ 31.034786] Using IPI No-Shortcut mode [ 31.034885] Magic number: 11:887:977 [ 31.034890] hash matches device ttyc4 [ 31.035022] Freeing unused kernel memory: 360k freed [ 32.143513] Capability LSM initialized [ 32.147526] ACPI Warning (tbutils-0158): Incorrect checksum in table [OEMB] - 35, should be 26 [20070126] [ 32.147535] ACPI: SSDT 7D5C01A0, 02F4 (r1 DpgPmm P001Ist 11 INTL 20051117) [ 32.147711] Monitor-Mwait will be used to enter C-1 state [ 32.147714] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 32.147837] ACPI: SSDT 7D5C06B0, 02F4 (r1 DpgPmm P002Ist 12 INTL 20051117) [ 32.147996] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 32.148005] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] [ 32.148010] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] [ 2.268000] Marking TSC unstable due to: possible TSC halt in C2. [ 2.272000] Time: acpi_pm clocksource has been installed. [ 2.532000] usbcore: registered new interface driver usbfs [ 2.532000] usbcore: registered new interface driver hub [ 2.532000] usbcore: registered new device driver usb [ 2.532000] USB Universal Host Controller Interface driver v3.0 [ 2.532000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 2.532000] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 2.532000] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.532000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.532000] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000d880 [ 2.532000] usb usb1: configuration #1 chosen from 1 choice [ 2.532000] hub 1-0:1.0: USB hub found [ 2.532000] hub 1-0:1.0: 2 ports detected [ 2.548000] SCSI subsystem initialized [ 2.552000] libata version 2.21 loaded. [ 2.616000] FDC 0 is a National Semiconductor PC87306 [ 2.640000] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 18 [ 2.640000] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 2.640000] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.640000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 2.640000] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000d800 [ 2.640000] usb usb2: configuration #1 chosen from 1 choice [ 2.640000] hub 2-0:1.0: USB hub found [ 2.640000] hub 2-0:1.0: 2 ports detected [ 2.744000] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 2.744000] PCI: Setting latency timer of device 0000:00:1a.2 to 64 [ 2.744000] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 2.744000] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 2.744000] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480 [ 2.744000] usb usb3: configuration #1 chosen from 1 choice [ 2.744000] hub 3-0:1.0: USB hub found [ 2.744000] hub 3-0:1.0: 2 ports detected [ 2.848000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 2.848000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 2.848000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.848000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 2.848000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000d400 [ 2.848000] usb usb4: configuration #1 chosen from 1 choice [ 2.848000] hub 4-0:1.0: USB hub found [ 2.848000] hub 4-0:1.0: 2 ports detected [ 2.952000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21 [ 2.952000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 2.952000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.952000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 2.952000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000d080 [ 2.952000] usb usb5: configuration #1 chosen from 1 choice [ 2.952000] hub 5-0:1.0: USB hub found [ 2.952000] hub 5-0:1.0: 2 ports detected [ 3.056000] ACPI: PCI Interrupt 0000:00:1d.2[D] -> GSI 16 (level, low) -> IRQ 17 [ 3.056000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.056000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.056000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 3.056000] uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000d000 [ 3.056000] usb usb6: configuration #1 chosen from 1 choice [ 3.056000] hub 6-0:1.0: USB hub found [ 3.056000] hub 6-0:1.0: 2 ports detected [ 3.160000] ACPI: PCI Interrupt 0000:00:1a.7[D] -> GSI 19 (level, low) -> IRQ 21 [ 3.160000] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 3.160000] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 3.160000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 [ 3.160000] ehci_hcd 0000:00:1a.7: debug port 1 [ 3.160000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 3.160000] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xffa7b400 [ 3.164000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.164000] usb usb7: configuration #1 chosen from 1 choice [ 3.164000] hub 7-0:1.0: USB hub found [ 3.164000] hub 7-0:1.0: 6 ports detected [ 3.268000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 3.268000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 3.268000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.268000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 3.268000] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.268000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 3.268000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa7b000 [ 3.272000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.272000] usb usb8: configuration #1 chosen from 1 choice [ 3.272000] hub 8-0:1.0: USB hub found [ 3.272000] hub 8-0:1.0: 6 ports detected [ 3.296000] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 3.376000] ata_piix 0000:00:1f.2: version 2.11 [ 3.376000] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 3.376000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21 [ 3.376000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 3.376000] scsi0 : ata_piix [ 3.376000] scsi1 : ata_piix [ 3.376000] ata1: SATA max UDMA/133 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c400 irq 0 [ 3.376000] ata2: SATA max UDMA/133 cmd 0x0001c800 ctl 0x0001c482 bmdma 0x0001c408 irq 0 [ 3.544000] ata1.00: ata_hpa_resize 1: sectors = 321672960, hpa_sectors = 321672960 [ 3.544000] ata1.00: ATA-7: Hitachi HDS721616PLA380, P22OAB3A, max UDMA/133 [ 3.544000] ata1.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.552000] ata1.00: ata_hpa_resize 1: sectors = 321672960, hpa_sectors = 321672960 [ 3.552000] ata1.00: configured for UDMA/133 [ 3.840000] usb 5-1: new low speed USB device using uhci_hcd and address 3 [ 4.036000] usb 5-1: configuration #1 chosen from 1 choice [ 4.060000] ata2.00: ATAPI, max UDMA/66 [ 4.064000] usbcore: registered new interface driver hiddev [ 4.076000] input: Avocent HP 336047-B21 as /class/input/input1 [ 4.076000] input: USB HID v1.10 Keyboard [Avocent HP 336047-B21] on usb-0000:00:1d.1-1 [ 4.096000] input: Avocent HP 336047-B21 as /class/input/input2 [ 4.096000] input: USB HID v1.10 Mouse [Avocent HP 336047-B21] on usb-0000:00:1d.1-1 [ 4.096000] usbcore: registered new interface driver usbhid [ 4.096000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 4.224000] ata2.00: configured for UDMA/66 [ 4.224000] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5 [ 4.224000] scsi 1:0:0:0: CD-ROM PLEXTOR DVDR PX-755A 1.04 PQ: 0 ANSI: 5 [ 4.224000] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ] [ 4.224000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 21 [ 4.224000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 4.224000] scsi2 : ata_piix [ 4.224000] scsi3 : ata_piix [ 4.224000] ata3: SATA max UDMA/133 cmd 0x0001bc00 ctl 0x0001b882 bmdma 0x0001b400 irq 0 [ 4.224000] ata4: SATA max UDMA/133 cmd 0x0001b800 ctl 0x0001b482 bmdma 0x0001b408 irq 0 [ 4.384000] ATA: abnormal status 0x7F on port 0x0001bc07 [ 4.552000] ATA: abnormal status 0x7F on port 0x0001b807 [ 4.568000] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) [ 4.568000] sd 0:0:0:0: [sda] Write Protect is off [ 4.568000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.568000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.568000] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) [ 4.568000] sd 0:0:0:0: [sda] Write Protect is off [ 4.568000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.568000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.568000] sda: sda1 sda2 < sda5 > [ 4.596000] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.600000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.600000] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.604000] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 4.604000] Uniform CD-ROM driver Revision: 3.20 [ 4.604000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.744000] Attempting manual resume [ 4.744000] swsusp: Resume From Partition 8:5 [ 4.744000] PM: Checking swsusp image. [ 4.744000] PM: Resume from disk failed. [ 4.752000] EXT3-fs: INFO: recovery required on readonly filesystem. [ 4.752000] EXT3-fs: write access will be enabled during recovery. [ 6.088000] kjournald starting. Commit interval 5 seconds [ 6.088000] EXT3-fs: recovery complete. [ 6.088000] EXT3-fs: mounted filesystem with ordered data mode. [ 12.320000] input: PC Speaker as /class/input/input3 [ 12.384000] parport_pc 00:09: reported by Plug and Play ACPI [ 12.384000] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] [ 12.584000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 12.584000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 13.728000] lp0: using parport0 (interrupt-driven). [ 13.756000] Adding 5952040k swap on /dev/disk/by-uuid/a5474236-7a00-41c7-bd8d-53c3c38d6703. Priority:-1 extents:1 across:5952040k [ 13.856000] EXT3 FS on sda1, internal journal [ 14.108000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 14.152000] No dock devices found. [ 14.160000] input: Power Button (FF) as /class/input/input4 [ 14.160000] ACPI: Power Button (FF) [PWRF] [ 14.160000] input: Power Button (CM) as /class/input/input5 [ 14.160000] ACPI: Power Button (CM) [PWRB] [ 16.320000] mtrr: no more MTRRs available [ 16.320000] mtrr: no more MTRRs available [ 16.320000] mtrr: no more MTRRs available [ 17.672000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 17.672000] apm: disabled - APM is not SMP safe. [ 17.964000] Bluetooth: Core ver 2.11 [ 17.964000] NET: Registered protocol family 31 [ 17.964000] Bluetooth: HCI device and connection manager initialized [ 17.964000] Bluetooth: HCI socket layer initialized [ 18.032000] Bluetooth: L2CAP ver 2.8 [ 18.032000] Bluetooth: L2CAP socket layer initialized [ 18.288000] Bluetooth: RFCOMM socket layer initialized [ 18.288000] Bluetooth: RFCOMM TTY layer initialized [ 18.288000] Bluetooth: RFCOMM ver 1.8 [ 52.344000] NET: Registered protocol family 10 [ 52.344000] lo: Disabled Privacy Extensions [ 93.428000] usb 8-1: new high speed USB device using ehci_hcd and address 3 [ 93.572000] usb 8-1: configuration #1 chosen from 1 choice [ 94.440000] eth0: register 'asix' at usb-0000:00:1d.7-1, ASIX AX88772 USB 2.0 Ethernet, 00:16:b6:ef:1d:21 [ 94.440000] usbcore: registered new interface driver asix [ 94.496000] eth0: link down [ 94.500000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 96.224000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 96.224000] eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1 [ 98.284000] NET: Registered protocol family 17 [ 113.656000] eth0: no IPv6 routers present