[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f52e0 [ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 131056 [ 0.000000] HighMem 131056 -> 131056 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 131056 [ 0.000000] On node 0 totalpages: 131056 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 991 pages used for memmap [ 0.000000] Normal zone: 125969 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6DF0 checksum 0 [ 0.000000] ACPI: RSDP 000F6DF0, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 1FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: FACP 1FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: DSDT 1FFF30C0, 464A (r1 NVIDIA AWRDACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 1FFF0000, 0040 [ 0.000000] ACPI: APIC 1FFF7740, 005A (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:10 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) [ 0.000000] Built 1 zonelists. Total pages: 130033 [ 0.000000] Kernel command line: root=UUID=9c0601b1-3a46-4df8-ab93-ffb00e0ab19e ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1829.999 MHz processor. [ 19.417030] Console: colour VGA+ 80x25 [ 19.417360] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 19.417629] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 19.431813] Memory: 507916k/524224k available (2015k kernel code, 15720k reserved, 916k data, 364k init, 0k highmem) [ 19.431824] virtual kernel memory layout: [ 19.431826] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 19.431827] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 19.431828] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 19.431830] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 19.431831] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 19.431833] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 19.431834] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 19.431838] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 19.431888] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 19.511834] Calibrating delay using timer specific routine.. 3662.99 BogoMIPS (lpj=7325986) [ 19.511870] Security Framework v1.0.0 initialized [ 19.511878] SELinux: Disabled at boot. [ 19.511896] Mount-cache hash table entries: 512 [ 19.512061] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 [ 19.512072] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 19.512075] CPU: L2 Cache: 512K (64 bytes/line) [ 19.512079] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 [ 19.512091] Compat vDSO mapped to ffffe000. [ 19.512105] Checking 'hlt' instruction... OK. [ 19.527982] SMP alternatives: switching to UP code [ 19.528287] Freeing SMP alternatives: 11k freed [ 19.528661] Early unpacking initramfs... done [ 19.874286] ACPI: Core revision 20070126 [ 19.874384] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 19.877482] CPU0: AMD Athlon(tm) XP 2500+ stepping 00 [ 19.877506] Total of 1 processors activated (3662.99 BogoMIPS). [ 19.877704] ENABLING IO-APIC IRQs [ 19.877899] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 20.023420] Brought up 1 CPUs [ 20.023565] Booting paravirtualized kernel on bare hardware [ 20.023636] Time: 6:23:43 Date: 11/13/107 [ 20.023665] NET: Registered protocol family 16 [ 20.023778] EISA bus registered [ 20.023792] ACPI: bus type pci registered [ 20.055830] PCI: PCI BIOS revision 2.10 entry at 0xfaf50, last bus=2 [ 20.055833] PCI: Using configuration type 1 [ 20.055835] Setting up standard PCI resources [ 20.060040] ACPI: EC: Look up EC in DSDT [ 20.065305] ACPI: Interpreter enabled [ 20.065309] ACPI: (supports S0 S1 S4 S5) [ 20.065326] ACPI: Using IOAPIC for interrupt routing [ 20.074414] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 20.074422] PCI: Probing PCI hardware (bus 00) [ 20.074504] PCI: nForce2 C1 Halt Disconnect fixup [ 20.075242] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 20.075404] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 20.075707] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 20.118922] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 20.119073] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 20.119222] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 20.119380] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 20.119528] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 20.119677] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 20.119837] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 20.119987] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 20.120135] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 20.120283] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 20.120430] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 20.120578] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 20.120729] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 20.120876] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 20.121023] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 20.121169] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 20.121300] ACPI: PCI Interrupt Link [APC1] (IRQs *16) [ 20.121415] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. [ 20.121530] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. [ 20.121644] ACPI: PCI Interrupt Link [APC4] (IRQs *19) [ 20.121758] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 20.121937] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 20.122103] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 [ 20.122267] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. [ 20.122431] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. [ 20.122595] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0 [ 20.122759] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 20.122876] ACPI: PCI Interrupt Link [APCS] (IRQs *23) [ 20.123039] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 20.123203] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. [ 20.123374] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [ 20.123540] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 20.123646] Linux Plug and Play Support v0.97 (c) Adam Belay [ 20.123659] pnp: PnP ACPI init [ 20.123668] ACPI: bus type pnp registered [ 20.128498] pnp: PnP ACPI: found 15 devices [ 20.128501] ACPI: ACPI bus type pnp unregistered [ 20.128506] PnPBIOS: Disabled by ACPI PNP [ 20.128569] PCI: Using ACPI for IRQ routing [ 20.128574] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 20.165984] NET: Registered protocol family 8 [ 20.165986] NET: Registered protocol family 20 [ 20.166061] pnp: 00:00: ioport range 0x1000-0x107f has been reserved [ 20.166065] pnp: 00:00: ioport range 0x1080-0x10ff has been reserved [ 20.166068] pnp: 00:00: ioport range 0x1400-0x147f has been reserved [ 20.166071] pnp: 00:00: ioport range 0x1480-0x14ff has been reserved [ 20.166074] pnp: 00:00: ioport range 0x1800-0x187f has been reserved [ 20.166077] pnp: 00:00: ioport range 0x1880-0x18ff has been reserved [ 20.166082] pnp: 00:01: ioport range 0x1c00-0x1c3f has been reserved [ 20.166085] pnp: 00:01: ioport range 0x2000-0x203f has been reserved [ 20.166091] pnp: 00:02: iomem range 0xf0000-0xf3fff could not be reserved [ 20.166094] pnp: 00:02: iomem range 0xf4000-0xf7fff could not be reserved [ 20.166097] pnp: 00:02: iomem range 0xf8000-0xfbfff could not be reserved [ 20.166100] pnp: 00:02: iomem range 0xfc000-0xfffff could not be reserved [ 20.167236] Time: tsc clocksource has been installed. [ 20.196417] PCI: Bridge: 0000:00:08.0 [ 20.196420] IO window: a000-cfff [ 20.196426] MEM window: de000000-dfffffff [ 20.196431] PREFETCH window: 30000000-300fffff [ 20.196436] PCI: Bridge: 0000:00:1e.0 [ 20.196438] IO window: disabled. [ 20.196442] MEM window: dc000000-ddffffff [ 20.196446] PREFETCH window: d0000000-d7ffffff [ 20.196458] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 20.196475] NET: Registered protocol family 2 [ 20.235232] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 20.235297] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 20.235587] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 20.235783] TCP: Hash tables configured (established 16384 bind 16384) [ 20.235786] TCP reno registered [ 20.247297] checking if image is initramfs... it is [ 20.698759] Switched to high resolution mode on CPU 0 [ 20.907966] Freeing initrd memory: 7350k freed [ 20.908479] audit: initializing netlink socket (disabled) [ 20.908495] audit(1197527023.132:1): initialized [ 20.910493] VFS: Disk quotas dquot_6.5.1 [ 20.910549] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 20.910657] io scheduler noop registered [ 20.910660] io scheduler anticipatory registered [ 20.910662] io scheduler deadline registered [ 20.910677] io scheduler cfq registered (default) [ 20.966398] Boot video device is 0000:02:00.0 [ 20.966591] isapnp: Scanning for PnP cards... [ 21.320748] isapnp: No Plug & Play device found [ 21.347980] Real Time Clock Driver v1.12ac [ 21.348106] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 21.348220] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 21.348394] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 21.349020] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 21.349304] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 21.350192] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 21.350444] input: Macintosh mouse button emulation as /class/input/input0 [ 21.350530] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 21.350534] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 21.353563] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 21.353570] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 21.353783] mice: PS/2 mouse device common for all mice [ 21.353921] EISA: Probing bus 0 at eisa.0 [ 21.353933] Cannot allocate resource for EISA slot 1 [ 21.353936] Cannot allocate resource for EISA slot 2 [ 21.353976] EISA: Detected 0 cards. [ 21.354093] TCP cubic registered [ 21.354103] NET: Registered protocol family 1 [ 21.354126] Using IPI No-Shortcut mode [ 21.354328] Magic number: 3:470:367 [ 21.355054] Freeing unused kernel memory: 364k freed [ 21.398002] input: AT Translated Set 2 keyboard as /class/input/input1 [ 22.569802] AppArmor: AppArmor initialized<5>audit(1197527024.632:2): type=1505 info="AppArmor initialized" pid=1220 [ 22.576845] fuse init (API version 7.8) [ 22.581961] Failure registering capabilities with primary security module. [ 23.222338] usbcore: registered new interface driver usbfs [ 23.222371] usbcore: registered new interface driver hub [ 23.222399] usbcore: registered new device driver usb [ 23.223179] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 23.223571] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 [ 23.223582] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16 [ 23.223598] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 23.223603] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 23.223854] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 23.223877] ohci_hcd 0000:00:02.0: irq 16, io mem 0xe0003000 [ 23.306089] usb usb1: configuration #1 chosen from 1 choice [ 23.306126] hub 1-0:1.0: USB hub found [ 23.306141] hub 1-0:1.0: 3 ports detected [ 23.317329] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 23.317336] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 23.408313] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 [ 23.408328] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17 [ 23.408346] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 23.408350] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 23.408381] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 23.408404] ohci_hcd 0000:00:02.1: irq 17, io mem 0xe0004000 [ 23.450839] Floppy drive(s): fd0 is 1.44M [ 23.465888] usb usb2: configuration #1 chosen from 1 choice [ 23.465933] hub 2-0:1.0: USB hub found [ 23.465949] hub 2-0:1.0: 3 ports detected [ 23.519258] FDC 0 is a post-1991 82077 [ 23.568266] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 23.568279] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 18 [ 23.568295] PCI: Setting latency timer of device 0000:00:02.2 to 64 [ 23.568299] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 23.568331] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 [ 23.568374] ehci_hcd 0000:00:02.2: debug port 1 [ 23.568379] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [ 23.568393] ehci_hcd 0000:00:02.2: irq 18, io mem 0xe0005000 [ 23.711466] usb 1-2: new full speed USB device using ohci_hcd and address 2 [ 23.711491] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 23.711628] usb usb3: configuration #1 chosen from 1 choice [ 23.711662] hub 3-0:1.0: USB hub found [ 23.711671] hub 3-0:1.0: 6 ports detected [ 23.816540] NFORCE2: IDE controller at PCI slot 0000:00:09.0 [ 23.816572] NFORCE2: chipset revision 162 [ 23.816575] NFORCE2: not 100% native mode: will probe irqs later [ 23.816580] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. [ 23.816582] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. [ 23.816589] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller [ 23.816602] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 23.816613] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [ 23.816624] Probing IDE interface ide0... [ 24.103165] hda: ST3120026A, ATA DISK drive [ 24.266871] usb 3-2: new high speed USB device using ehci_hcd and address 2 [ 24.378751] usb 3-2: device descriptor read/64, error -71 [ 24.594522] usb 3-2: device descriptor read/64, error -71 [ 24.775038] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 24.778698] Probing IDE interface ide1... [ 24.810297] usb 3-2: new high speed USB device using ehci_hcd and address 3 [ 24.922171] usb 3-2: device descriptor read/64, error -71 [ 25.137941] usb 3-2: device descriptor read/64, error -71 [ 25.353711] usb 3-2: new high speed USB device using ehci_hcd and address 4 [ 25.761276] usb 3-2: device not accepting address 4, error -71 [ 25.793364] hdd: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive [ 25.849456] ide1 at 0x170-0x177,0x376 on irq 15 [ 25.859119] SCSI subsystem initialized [ 25.865219] libata version 2.21 loaded. [ 25.867313] r8169 Gigabit Ethernet driver 2.2LK loaded [ 25.867569] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 25.867580] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 19 [ 25.867929] eth0: RTL8110s at 0xe083a000, 00:0d:61:47:07:ee, XID 04000000 IRQ 19 [ 25.873188] usb 3-2: new high speed USB device using ehci_hcd and address 5 [ 25.880435] hda: max request size: 512KiB [ 25.890461] hda: Host Protected Area detected. [ 25.890464] current capacity is 234435439 sectors (120030 MB) [ 25.890465] native capacity is 234441648 sectors (120034 MB) [ 25.890938] hda: Host Protected Area disabled. [ 25.890943] hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) [ 25.891119] hda: cache flushes supported [ 25.891183] hda: hda1 hda2 < hda5 > [ 25.949235] hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66) [ 25.949246] Uniform CD-ROM driver Revision: 3.20 [ 26.118365] Attempting manual resume [ 26.118371] swsusp: Resume From Partition 3:5 [ 26.118373] PM: Checking swsusp image. [ 26.118663] PM: Resume from disk failed. [ 26.166617] kjournald starting. Commit interval 5 seconds [ 26.166632] EXT3-fs: mounted filesystem with ordered data mode. [ 26.280731] usb 3-2: device not accepting address 5, error -71 [ 26.804177] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 27.017160] usb 2-1: configuration #1 chosen from 1 choice [ 32.800847] Linux agpgart interface v0.102 (c) Dave Jones [ 32.810713] agpgart: Detected NVIDIA nForce2 chipset [ 32.815797] agpgart: AGP aperture is 64M @ 0xd8000000 [ 33.438322] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 33.438362] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2000 [ 33.891515] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 33.894313] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 34.262318] input: PC Speaker as /class/input/input2 [ 34.394905] parport_pc 00:0c: reported by Plug and Play ACPI [ 34.394993] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 34.490001] usbcore: registered new interface driver hiddev [ 34.495657] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input3 [ 34.495741] input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.1-1 [ 34.495762] usbcore: registered new interface driver usbhid [ 34.495767] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 34.707120] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 34.707128] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 16 [ 34.707155] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 35.027414] intel8x0_measure_ac97_clock: measured 54694 usecs [ 35.027420] intel8x0: clocking to 47445 [ 35.967299] lp0: using parport0 (interrupt-driven). [ 36.019961] Adding 1510068k swap on /dev/hda5. Priority:-1 extents:1 across:1510068k [ 36.325237] EXT3 FS on hda1, internal journal [ 37.364647] No dock devices found. [ 37.480734] input: Power Button (FF) as /class/input/input4 [ 37.485979] ACPI: Power Button (FF) [PWRF] [ 37.532146] input: Power Button (CM) as /class/input/input5 [ 37.537347] ACPI: Power Button (CM) [PWRB] [ 39.378754] r8169: eth0: link up [ 39.434065] ppdev: user-space parallel port driver [ 39.612109] audit(1197527042.295:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4769 profile="/usr/sbin/cupsd" [ 39.659642] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 39.659649] apm: overridden by ACPI. [ 39.881005] Failure registering capabilities with primary security module. [ 40.065417] Bluetooth: Core ver 2.11 [ 40.065563] NET: Registered protocol family 31 [ 40.065566] Bluetooth: HCI device and connection manager initialized [ 40.065571] Bluetooth: HCI socket layer initialized [ 40.089321] Bluetooth: L2CAP ver 2.8 [ 40.089327] Bluetooth: L2CAP socket layer initialized [ 40.152440] Bluetooth: RFCOMM socket layer initialized [ 40.152543] Bluetooth: RFCOMM TTY layer initialized [ 40.152546] Bluetooth: RFCOMM ver 1.8 [ 40.173954] usb 3-2: new high speed USB device using ehci_hcd and address 7 [ 40.285815] usb 3-2: device descriptor read/64, error -71 [ 40.501585] usb 3-2: device descriptor read/64, error -71 [ 40.717354] usb 3-2: new high speed USB device using ehci_hcd and address 8 [ 40.829237] usb 3-2: device descriptor read/64, error -71 [ 41.045006] usb 3-2: device descriptor read/64, error -71 [ 41.260777] usb 3-2: new high speed USB device using ehci_hcd and address 9 [ 41.668343] usb 3-2: device not accepting address 9, error -71 [ 41.780226] usb 3-2: new high speed USB device using ehci_hcd and address 10 [ 42.187790] usb 3-2: device not accepting address 10, error -71 [ 44.151028] NET: Registered protocol family 17 [ 46.478190] NET: Registered protocol family 10 [ 46.478379] lo: Disabled Privacy Extensions [ 56.876154] eth0: no IPv6 routers present [ 533.189067] usb 3-2: new high speed USB device using ehci_hcd and address 11 [ 533.300944] usb 3-2: device descriptor read/64, error -71 [ 533.516717] usb 3-2: device descriptor read/64, error -71 [ 533.732484] usb 3-2: new high speed USB device using ehci_hcd and address 12 [ 533.844370] usb 3-2: device descriptor read/64, error -71 [ 534.060139] usb 3-2: device descriptor read/64, error -71 [ 534.275908] usb 3-2: new high speed USB device using ehci_hcd and address 13 [ 534.683472] usb 3-2: device not accepting address 13, error -71 [ 534.795354] usb 3-2: new high speed USB device using ehci_hcd and address 14 [ 535.202921] usb 3-2: device not accepting address 14, error -71 [ 535.442665] usb 3-4: new high speed USB device using ehci_hcd and address 15 [ 535.554543] usb 3-4: device descriptor read/64, error -71 [ 535.770314] usb 3-4: device descriptor read/64, error -71 [ 535.986089] usb 3-4: new high speed USB device using ehci_hcd and address 16 [ 536.097967] usb 3-4: device descriptor read/64, error -71 [ 536.313738] usb 3-4: device descriptor read/64, error -71 [ 536.529508] usb 3-4: new high speed USB device using ehci_hcd and address 17 [ 536.937079] usb 3-4: device not accepting address 17, error -71 [ 537.048958] usb 3-4: new high speed USB device using ehci_hcd and address 18 [ 537.456528] usb 3-4: device not accepting address 18, error -71