[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-17-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu May 1 14:31:33 UTC 2008 (Ubuntu 2.6.24-17.31-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6d3400 (usable) [ 0.000000] BIOS-e820: 000000003f6d3400 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved) [ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 118MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 259795) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 259795 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 259795 [ 0.000000] On node 0 totalpages: 259795 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 237 pages used for memmap [ 0.000000] HighMem zone: 30182 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FC1B0 checksum 0 [ 0.000000] ACPI: RSDP 000FC1B0, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT 3F6D39CD, 0040 (r1 DELL M07 27D7061B ASL 61) [ 0.000000] ACPI: FACP 3F6D4800, 0074 (r1 DELL M07 27D7061B ASL 61) [ 0.000000] ACPI: DSDT 3F6D5400, 4841 (r1 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 3F6E3C00, 0040 [ 0.000000] ACPI: HPET 3F6D4F00, 0038 (r1 DELL M07 1 ASL 61) [ 0.000000] ACPI: APIC 3F6D5000, 0068 (r1 DELL M07 27D7061B ASL 47) [ 0.000000] ACPI: MCFG 3F6D4FC0, 003E (r16 DELL M07 27D7061B ASL 61) [ 0.000000] ACPI: SLIC 3F6D509C, 0176 (r1 DELL M07 27D7061B ASL 61) [ 0.000000] ACPI: BOOT 3F6D4BC0, 0028 (r1 DELL M07 27D7061B ASL 61) [ 0.000000] ACPI: SSDT 3F6D3A0D, 04DC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257766 [ 0.000000] Kernel command line: root=UUID=79ee21b7-8f90-43d4-a3b0-fe6b854a337c ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1729.042 MHz processor. [ 6.657010] Console: colour VGA+ 80x25 [ 6.657014] console [tty0] enabled [ 6.657330] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 6.657718] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 6.685278] Memory: 1018036k/1039180k available (2176k kernel code, 20392k reserved, 1007k data, 368k init, 121676k highmem) [ 6.685286] virtual kernel memory layout: [ 6.685287] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 6.685289] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 6.685290] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 6.685291] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 6.685293] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 6.685294] .data : 0xc0320134 - 0xc041bdc4 (1007 kB) [ 6.685295] .text : 0xc0100000 - 0xc0320134 (2176 kB) [ 6.685300] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 6.685334] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 6.685477] hpet clockevent registered [ 6.765450] Calibrating delay using timer specific routine.. 3462.00 BogoMIPS (lpj=6924001) [ 6.765470] Security Framework initialized [ 6.765477] SELinux: Disabled at boot. [ 6.765491] AppArmor: AppArmor initialized [ 6.765495] Failure registering capabilities with primary security module. [ 6.765503] Mount-cache hash table entries: 512 [ 6.765618] Initializing cgroup subsys ns [ 6.765624] Initializing cgroup subsys cpuacct [ 6.765635] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000 [ 6.765643] monitor/mwait feature present. [ 6.765644] using mwait in idle threads. [ 6.765649] CPU: L1 I cache: 32K, L1 D cache: 32K [ 6.765651] CPU: L2 cache: 2048K [ 6.765654] CPU: Physical Processor ID: 0 [ 6.765656] CPU: Processor Core ID: 0 [ 6.765658] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000 [ 6.765667] Compat vDSO mapped to ffffe000. [ 6.765679] Checking 'hlt' instruction... OK. [ 6.781847] SMP alternatives: switching to UP code [ 6.783667] Early unpacking initramfs... done [ 7.134139] ACPI: Core revision 20070126 [ 7.134196] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 7.137071] CPU0: Intel Genuine Intel(R) CPU T2250 @ 1.73GHz stepping 08 [ 7.137090] SMP alternatives: switching to SMP code [ 7.137805] Booting processor 1/1 eip 3000 [ 9.056889] Initializing CPU#1 [ 9.135657] Calibrating delay using timer specific routine.. 3458.00 BogoMIPS (lpj=6916016) [ 9.135664] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000 [ 9.135670] monitor/mwait feature present. [ 9.135673] CPU: L1 I cache: 32K, L1 D cache: 32K [ 9.135675] CPU: L2 cache: 2048K [ 9.135677] CPU: Physical Processor ID: 0 [ 9.135679] CPU: Processor Core ID: 1 [ 9.135680] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000 [ 7.229881] CPU1: Intel Genuine Intel(R) CPU T2250 @ 1.73GHz stepping 08 [ 7.229906] Total of 2 processors activated (6920.00 BogoMIPS). [ 7.230106] ENABLING IO-APIC IRQs [ 7.230414] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 7.377315] checking TSC synchronization [CPU#0 -> CPU#1]: [ 7.397314] Measured 3297573110 cycles TSC warp between CPUs, turning off TSC clock. [ 7.397317] Marking TSC unstable due to: check_tsc_sync_source failed. [ 7.397332] Brought up 2 CPUs [ 7.397360] CPU0 attaching sched-domain: [ 7.397363] domain 0: span 03 [ 7.397365] groups: 01 02 [ 7.397368] CPU1 attaching sched-domain: [ 7.397369] domain 0: span 03 [ 7.397371] groups: 02 01 [ 9.304044] net_namespace: 64 bytes [ 9.304054] Booting paravirtualized kernel on bare hardware [ 9.304523] Time: 3:34:15 Date: 05/31/08 [ 9.304554] NET: Registered protocol family 16 [ 9.304774] EISA bus registered [ 9.304779] ACPI: bus type pci registered [ 9.333691] PCI: PCI BIOS revision 2.10 entry at 0xfb316, last bus=14 [ 9.333694] PCI: Using configuration type 1 [ 9.333696] Setting up standard PCI resources [ 7.433063] ACPI: EC: Look up EC in DSDT [ 7.438297] ACPI: Interpreter enabled [ 7.438301] ACPI: (supports S0 S3 S4 S5) [ 7.438314] ACPI: Using IOAPIC for interrupt routing [ 7.452674] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 7.453526] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 7.453531] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 7.454848] PCI: Transparent bridge - 0000:00:1e.0 [ 7.454892] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 7.455346] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 7.455479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 7.455597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 7.455714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 7.464699] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 7.464810] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4 [ 7.464919] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) [ 7.465027] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 [ 7.465136] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 7.465253] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 7.465364] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 7.465478] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 7.465636] Linux Plug and Play Support v0.97 (c) Adam Belay [ 7.465673] pnp: PnP ACPI init [ 7.465680] ACPI: bus type pnp registered [ 7.482061] pnpacpi: exceeded the max number of mem resources: 12 [ 7.494998] pnp: PnP ACPI: found 12 devices [ 7.495001] ACPI: ACPI bus type pnp unregistered [ 7.495004] PnPBIOS: Disabled by ACPI PNP [ 9.401672] PCI: Using ACPI for IRQ routing [ 9.401675] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 9.483658] NET: Registered protocol family 8 [ 9.483660] NET: Registered protocol family 20 [ 9.483697] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 9.483701] hpet0: 3 64-bit timers, 14318180 Hz [ 9.484739] AppArmor: AppArmor Filesystem Enabled [ 7.581101] Time: hpet clocksource has been installed. [ 7.581120] Switched to high resolution mode on CPU 0 [ 9.487656] Switched to high resolution mode on CPU 1 [ 7.594097] system 00:00: iomem range 0x0-0x9fbff could not be reserved [ 7.594100] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 7.594103] system 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 7.594107] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 7.594110] system 00:00: iomem range 0x100000-0x3f6d33ff could not be reserved [ 7.594113] system 00:00: iomem range 0x3f6d3400-0x3f6fffff could not be reserved [ 7.594116] system 00:00: iomem range 0x3f700000-0x3f7fffff could not be reserved [ 7.594119] system 00:00: iomem range 0x3f700000-0x3fefffff could not be reserved [ 7.594123] system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved [ 7.594126] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 7.594129] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 7.594133] system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved [ 7.594140] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 7.594143] system 00:02: ioport range 0x1000-0x1005 has been reserved [ 7.594146] system 00:02: ioport range 0x1008-0x100f has been reserved [ 7.594152] system 00:03: ioport range 0xf400-0xf4fe has been reserved [ 7.594155] system 00:03: ioport range 0x1006-0x1007 has been reserved [ 7.594158] system 00:03: ioport range 0x100a-0x1059 could not be reserved [ 7.594161] system 00:03: ioport range 0x1060-0x107f has been reserved [ 7.594164] system 00:03: ioport range 0x1080-0x10bf has been reserved [ 7.594167] system 00:03: ioport range 0x10c0-0x10df has been reserved [ 7.594170] system 00:03: ioport range 0x1010-0x102f has been reserved [ 7.594173] system 00:03: ioport range 0x809-0x809 has been reserved [ 7.594181] system 00:08: ioport range 0xc80-0xcff could not be reserved [ 7.594184] system 00:08: ioport range 0x910-0x91f has been reserved [ 7.594187] system 00:08: ioport range 0x920-0x92f has been reserved [ 7.594190] system 00:08: ioport range 0xcb0-0xcbf has been reserved [ 7.594193] system 00:08: ioport range 0x930-0x97f has been reserved [ 7.594200] system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved [ 7.624671] PCI: Bridge: 0000:00:1c.0 [ 7.624673] IO window: disabled. [ 7.624679] MEM window: disabled. [ 7.624685] PREFETCH window: disabled. [ 7.624691] PCI: Bridge: 0000:00:1c.1 [ 7.624692] IO window: disabled. [ 7.624698] MEM window: efd00000-efdfffff [ 7.624703] PREFETCH window: disabled. [ 7.624709] PCI: Bridge: 0000:00:1c.3 [ 7.624712] IO window: d000-dfff [ 7.624718] MEM window: efa00000-efcfffff [ 7.624723] PREFETCH window: e0000000-e01fffff [ 7.624730] PCI: Bridge: 0000:00:1e.0 [ 7.624731] IO window: disabled. [ 7.624737] MEM window: ef900000-ef9fffff [ 7.624742] PREFETCH window: disabled. [ 7.624774] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 7.624781] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 7.624807] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 7.624813] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 7.624838] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 [ 7.624845] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 7.624859] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 7.624871] NET: Registered protocol family 2 [ 7.669082] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 7.669310] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 7.670041] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 7.670405] TCP: Hash tables configured (established 131072 bind 65536) [ 7.670408] TCP reno registered [ 7.681179] checking if image is initramfs... it is [ 8.374169] Freeing initrd memory: 7284k freed [ 8.374345] Simple Boot Flag at 0x79 set to 0x1 [ 10.281510] audit: initializing netlink socket (disabled) [ 10.281523] audit(1212204855.564:1): initialized [ 8.375318] highmem bounce pool size: 64 pages [ 10.283949] VFS: Disk quotas dquot_6.5.1 [ 8.377633] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 8.377774] io scheduler noop registered [ 8.377776] io scheduler anticipatory registered [ 8.377778] io scheduler deadline registered [ 8.377791] io scheduler cfq registered (default) [ 8.377802] Boot video device is 0000:00:02.0 [ 8.378026] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 8.378086] assign_interrupt_mode Found MSI capability [ 8.378136] Allocate Port Service[0000:00:1c.0:pcie00] [ 8.378177] Allocate Port Service[0000:00:1c.0:pcie02] [ 8.378284] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 8.378343] assign_interrupt_mode Found MSI capability [ 8.378391] Allocate Port Service[0000:00:1c.1:pcie00] [ 8.378428] Allocate Port Service[0000:00:1c.1:pcie02] [ 8.378535] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 8.378593] assign_interrupt_mode Found MSI capability [ 8.378640] Allocate Port Service[0000:00:1c.3:pcie00] [ 8.378677] Allocate Port Service[0000:00:1c.3:pcie02] [ 8.378967] isapnp: Scanning for PnP cards... [ 8.733259] isapnp: No Plug & Play device found [ 8.762614] Real Time Clock Driver v1.12ac [ 8.762781] hpet_resources: 0xfed00000 is busy [ 8.762845] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 8.764122] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 8.764196] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 8.764300] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 8.767187] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.767192] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 8.788589] mice: PS/2 mouse device common for all mice [ 8.788721] EISA: Probing bus 0 at eisa.0 [ 8.788792] EISA: Mainboard FW_FFFF detected. [ 8.788832] Cannot allocate resource for EISA slot 1 [ 8.788863] EISA: Detected 0 cards. [ 8.788868] cpuidle: using governor ladder [ 8.788870] cpuidle: using governor menu [ 8.788972] NET: Registered protocol family 1 [ 8.789002] Using IPI No-Shortcut mode [ 8.789037] registered taskstats version 1 [ 8.789158] Magic number: 8:667:564 [ 8.789255] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 8.789258] EDD information not available. [ 8.789439] Freeing unused kernel memory: 368k freed [ 10.698010] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 10.019803] fuse init (API version 7.9) [ 10.041461] ACPI: SSDT 3F6D4134, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 10.041655] ACPI: SSDT 3F6D3EE9, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 10.042221] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 10.042226] ACPI: Processor [CPU0] (supports 8 throttling states) [ 10.042448] ACPI: SSDT 3F6D4378, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 10.042623] ACPI: SSDT 3F6D40AF, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 11.949691] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 11.949696] ACPI: Processor [CPU1] (supports 8 throttling states) [ 11.955026] ACPI: Thermal Zone [THM] (25 C) [ 10.413452] usbcore: registered new interface driver usbfs [ 10.413476] usbcore: registered new interface driver hub [ 10.424986] usbcore: registered new device driver usb [ 10.435771] USB Universal Host Controller Interface driver v3.0 [ 10.435830] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 10.435843] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 10.435848] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 10.436105] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 10.436141] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000bf80 [ 10.436277] usb usb1: configuration #1 chosen from 1 choice [ 10.436306] hub 1-0:1.0: USB hub found [ 10.436312] hub 1-0:1.0: 2 ports detected [ 10.510969] SCSI subsystem initialized [ 10.524884] libata version 3.00 loaded. [ 10.539782] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 10.539796] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 10.539801] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 10.539826] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 10.539862] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bf60 [ 10.539977] usb usb2: configuration #1 chosen from 1 choice [ 10.540001] hub 2-0:1.0: USB hub found [ 10.540007] hub 2-0:1.0: 2 ports detected [ 10.643764] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 10.643778] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 10.643783] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 10.643808] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 10.643842] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bf40 [ 10.643962] usb usb3: configuration #1 chosen from 1 choice [ 10.643987] hub 3-0:1.0: USB hub found [ 10.643992] hub 3-0:1.0: 2 ports detected [ 10.747700] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22 [ 10.747712] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 10.747717] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 10.747743] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 10.747777] uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000bf20 [ 10.747891] usb usb4: configuration #1 chosen from 1 choice [ 10.747917] hub 4-0:1.0: USB hub found [ 10.747922] hub 4-0:1.0: 2 ports detected [ 10.779580] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 12.758159] ACPI: PCI Interrupt 0000:03:01.0[A] -> <6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 [ 12.758167] GSI 19 (level, low) -> IRQ 18 [ 10.851769] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 10.851774] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 10.851813] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 10.855728] ehci_hcd 0000:00:1d.7: debug port 1 [ 10.855735] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 10.855742] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80000 [ 10.903504] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 10.903618] usb usb5: configuration #1 chosen from 1 choice [ 10.903644] hub 5-0:1.0: USB hub found [ 10.903650] hub 5-0:1.0: 8 ports detected [ 12.810876] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[ef9fd800-ef9fdfff] Max Packet=[2048] IR/IT contexts=[4/4] [ 10.959567] ata_piix 0000:00:1f.2: version 2.12 [ 10.959580] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 10.959631] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 10.959693] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 10.960781] scsi0 : ata_piix [ 10.960834] scsi1 : ata_piix [ 10.961630] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 [ 10.961634] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 [ 11.031474] ata1.00: failed to set max address (err_mask=0x1) [ 11.031483] ata1.00: device aborted resize (153356490 -> 156301488), skipping HPA handling [ 11.031496] ata1.00: ATA-7: Hitachi HTS541080G9SA00, MB4OC60R, max UDMA/100 [ 11.031504] ata1.00: 153356490 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 11.035782] ata1.00: configured for UDMA/100 [ 11.059674] usb 1-1: device not accepting address 2, error -71 [ 11.061199] Clocksource tsc unstable (delta = -246340699 ns) [ 13.014145] ata2.00: ATAPI: SONY DVD+/-RW DW-Q58A, UDS2, max UDMA/33 [ 11.127406] usb 5-1: new high speed USB device using ehci_hcd and address 2 [ 13.118109] ata2.00: configured for UDMA/33 [ 11.211879] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54108 MB4O PQ: 0 ANSI: 5 [ 11.212713] scsi 1:0:0:0: CD-ROM SONY DVD+-RW DW-Q58A UDS2 PQ: 0 ANSI: 5 [ 13.121077] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 11.259785] usb 5-1: configuration #1 chosen from 1 choice [ 11.259952] hub 5-1:1.0: USB hub found [ 11.260054] hub 5-1:1.0: 4 ports detected [ 13.178716] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 13.178740] b44.c:v2.0 [ 13.199002] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:15:c5:3d:88:31 [ 11.315551] Driver 'sd' needs updating - please use bus_type methods [ 11.316073] sd 0:0:0:0: [sda] 153356490 512-byte hardware sectors (78519 MB) [ 11.316087] sd 0:0:0:0: [sda] Write Protect is off [ 11.316090] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 11.316109] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.316160] sd 0:0:0:0: [sda] 153356490 512-byte hardware sectors (78519 MB) [ 11.316171] sd 0:0:0:0: [sda] Write Protect is off [ 11.316174] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 11.316191] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.316195] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 11.341889] sda1 sda2 sda3 < sda5 > [ 11.364025] sd 0:0:0:0: [sda] Attached SCSI disk [ 13.275097] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 13.275101] Uniform CD-ROM driver Revision: 3.20 [ 13.275149] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 11.368912] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 11.368930] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 11.645022] Attempting manual resume [ 11.645027] swsusp: Resume From Partition 8:5 [ 11.645028] PM: Checking swsusp image. [ 11.645283] PM: Resume from disk failed. [ 13.590085] kjournald starting. Commit interval 5 seconds [ 11.683699] EXT3-fs: mounted filesystem with ordered data mode. [ 11.715316] ieee1394: Host added: ID:BUS[0-00:1023] GUID[374fc000390cad41] [ 23.857959] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 23.913897] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.137798] Linux agpgart interface v0.102 [ 22.178342] agpgart: Detected an Intel 945GM Chipset. [ 22.179413] agpgart: Detected 7932K stolen memory. [ 22.210390] agpgart: AGP aperture is 256M @ 0xd0000000 [ 22.267041] intel_rng: FWH not detected [ 22.451250] ACPI: AC Adapter [AC] (on-line) [ 22.479053] iTCO_vendor_support: vendor-support=0 [ 22.530125] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 22.530231] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 22.530272] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 22.566505] ACPI: Battery Slot [BAT0] (battery absent) [ 22.606176] input: Lid Switch as /devices/virtual/input/input2 [ 22.606651] ACPI: Lid Switch [LID] [ 22.606698] input: Power Button (CM) as /devices/virtual/input/input3 [ 22.634038] ACPI: Power Button (CM) [PBTN] [ 22.634110] input: Sleep Button (CM) as /devices/virtual/input/input4 [ 22.666012] ACPI: Sleep Button (CM) [SBTN] [ 22.758150] ACPI: WMI-Acer: Mapper loaded [ 22.837970] ricoh-mmc: Ricoh MMC Controller disabling driver [ 22.837975] ricoh-mmc: Copyright(c) Philip Langdale [ 22.838041] ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 1) [ 22.838054] ricoh-mmc: Controller is now disabled. [ 22.925958] sdhci: Secure Digital Host Controller Interface driver [ 22.925963] sdhci: Copyright(c) Pierre Ossman [ 22.926015] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19) [ 22.926040] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 23 [ 22.926107] mmc0: SDHCI at 0xef9fd400 irq 23 DMA [ 22.975058] video: Unknown symbol video_output_register [ 22.975102] video: Unknown symbol video_output_unregister [ 23.019329] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2b/LNXVIDEO:00/input/input5 [ 23.049830] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 23.057940] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input6 [ 23.085825] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 23.086003] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:02/input/input7 [ 23.130498] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 25.926098] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 25.926128] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 26.044796] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.25 [ 26.044801] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 26.044940] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 26.044956] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 26.044982] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 26.176808] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 26.184757] wmaster0: Selected rate control algorithm 'iwl-3945-rs' [ 24.376989] ACPI: PCI interrupt for device 0000:0c:00.0 disabled [ 26.634797] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000 [ 24.763889] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 24.823999] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 25.387945] lp: driver loaded but no devices found [ 27.405992] Adding 2329384k swap on /dev/sda5. Priority:-1 extents:1 across:2329384k [ 25.926325] EXT3 FS on sda2, internal journal [ 26.923787] ip_tables: (C) 2000-2006 Netfilter Core Team [ 27.648789] No dock devices found. [ 31.885792] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 31.885938] PM: Writing back config space on device 0000:0c:00.0 at offset 1 (was 100102, writing 100106) [ 30.072905] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels [ 30.073992] Registered led device: iwl-phy0:RX [ 30.074034] Registered led device: iwl-phy0:TX [ 32.984279] [drm] Initialized drm 1.1.0 20060810 [ 32.988599] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 32.988611] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 32.989219] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 43.244489] NET: Registered protocol family 10 [ 43.245000] lo: Disabled Privacy Extensions [ 43.247241] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 43.248459] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 55.421386] CPU0 attaching NULL sched-domain. [ 55.421394] CPU1 attaching NULL sched-domain. [ 55.442266] CPU0 attaching sched-domain: [ 55.442274] domain 0: span 03 [ 55.442279] groups: 01 02 [ 55.442282] CPU1 attaching sched-domain: [ 55.442284] domain 0: span 03 [ 55.442286] groups: 02 01 [ 54.469879] NET: Registered protocol family 17 [ 56.298491] wlan0: Initial auth_alg=0 [ 56.298500] wlan0: authenticate with AP 00:90:d0:e7:3e:1a [ 58.206800] wlan0: RX authentication from 00:90:d0:e7:3e:1a (alg=0 transaction=2 status=0) [ 58.206805] wlan0: authenticated [ 58.206808] wlan0: associate with AP 00:90:d0:e7:3e:1a [ 58.209367] wlan0: RX AssocResp from 00:90:d0:e7:3e:1a (capab=0x411 status=0 aid=1) [ 58.209371] wlan0: associated [ 58.209431] wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0 [ 58.209434] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 [ 58.209437] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 [ 58.209441] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 [ 58.211306] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 57.702068] padlock: VIA PadLock not detected. [ 67.131379] wlan0: no IPv6 routers present