[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-18-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 20:27:26 UTC 2008 (Ubuntu 2.6.24-18.32-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe81400 (usable) [ 0.000000] BIOS-e820: 000000007fe81400 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved) [ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 523905) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 523905 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 523905 [ 0.000000] On node 0 totalpages: 523905 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292228 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FC0C0 checksum 0 [ 0.000000] ACPI: RSDP 000FC0C0, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT 7FE8198A, 0044 (r1 DELL M07 27D70403 ASL 61) [ 0.000000] ACPI: FACP 7FE82800, 0074 (r1 DELL M07 27D70403 ASL 61) [ 0.000000] ACPI: DSDT 7FE83400, 519E (r1 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 7FE91C00, 0040 [ 0.000000] ACPI: HPET 7FE82F00, 0038 (r1 DELL M07 1 ASL 61) [ 0.000000] ACPI: APIC 7FE83000, 0068 (r1 DELL M07 27D70403 ASL 47) [ 0.000000] ACPI: ASF! 7FE82C00, 005B (r16 DELL M07 27D70403 ASL 61) [ 0.000000] ACPI: MCFG 7FE82FC0, 003E (r16 DELL M07 27D70403 ASL 61) [ 0.000000] ACPI: SLIC 7FE8309C, 0176 (r1 DELL M07 27D70403 ASL 61) [ 0.000000] ACPI: TCPA 7FE83300, 0032 (r1 DELL M07 27D70403 ASL 61) [ 0.000000] ACPI: SSDT 7FE81A11, 04DC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519812 [ 0.000000] Kernel command line: root=/dev/mapper/VG_SYS-LV_UROOT ro resume=/dev/sda7 irqpoll [ 0.000000] Misrouted IRQ fixup and polling support enabled [ 0.000000] This may significantly impact system performance [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1995.072 MHz processor. [ 21.047725] Console: colour VGA+ 80x25 [ 21.047728] console [tty0] enabled [ 21.051339] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 21.051716] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 21.159350] Memory: 2064808k/2095620k available (2176k kernel code, 29504k reserved, 1006k data, 368k init, 1178116k highmem) [ 21.159430] virtual kernel memory layout: [ 21.159431] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 21.159432] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 21.159433] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 21.159434] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 21.159435] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 21.159436] .data : 0xc03201f4 - 0xc041bdc4 (1006 kB) [ 21.159437] .text : 0xc0100000 - 0xc03201f4 (2176 kB) [ 21.159859] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 21.160000] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 21.160199] hpet clockevent registered [ 21.240179] Calibrating delay using timer specific routine.. 4003.62 BogoMIPS (lpj=8007254) [ 21.240307] Security Framework initialized [ 21.240367] SELinux: Disabled at boot. [ 21.240431] AppArmor: AppArmor initialized [ 21.240484] Failure registering capabilities with primary security module. [ 21.240546] Mount-cache hash table entries: 512 [ 21.240714] Initializing cgroup subsys ns [ 21.240772] Initializing cgroup subsys cpuacct [ 21.240833] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 [ 21.240840] monitor/mwait feature present. [ 21.240895] using mwait in idle threads. [ 21.240949] CPU: L1 I cache: 32K, L1 D cache: 32K [ 21.241039] CPU: L2 cache: 2048K [ 21.241090] CPU: Physical Processor ID: 0 [ 21.241142] CPU: Processor Core ID: 0 [ 21.241195] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000 [ 21.241204] Compat vDSO mapped to ffffe000. [ 21.241266] Checking 'hlt' instruction... OK. [ 21.256569] SMP alternatives: switching to UP code [ 21.258205] Early unpacking initramfs... done [ 21.592157] ACPI: Core revision 20070126 [ 21.592261] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 21.595053] CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 [ 21.595249] SMP alternatives: switching to SMP code [ 21.595909] Booting processor 1/1 eip 3000 [ 23.882666] Initializing CPU#1 [ 23.962050] Calibrating delay using timer specific routine.. 3990.04 BogoMIPS (lpj=7980096) [ 23.962057] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 [ 23.962062] monitor/mwait feature present. [ 23.962065] CPU: L1 I cache: 32K, L1 D cache: 32K [ 23.962066] CPU: L2 cache: 2048K [ 23.962069] CPU: Physical Processor ID: 0 [ 23.962070] CPU: Processor Core ID: 1 [ 23.962071] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000 [ 21.688426] CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 [ 21.689003] Total of 2 processors activated (7993.67 BogoMIPS). [ 21.689254] ENABLING IO-APIC IRQs [ 21.689495] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 21.835949] checking TSC synchronization [CPU#0 -> CPU#1]: [ 21.856042] Measured 4539422772 cycles TSC warp between CPUs, turning off TSC clock. [ 21.856110] Marking TSC unstable due to: check_tsc_sync_source failed. [ 21.856178] Brought up 2 CPUs [ 21.856253] CPU0 attaching sched-domain: [ 21.856256] domain 0: span 03 [ 21.856257] groups: 01 02 [ 21.856260] CPU1 attaching sched-domain: [ 21.856262] domain 0: span 03 [ 21.856263] groups: 02 01 [ 24.130634] net_namespace: 64 bytes [ 24.130696] Booting paravirtualized kernel on bare hardware [ 24.131162] Time: 21:49:21 Date: 06/07/08 [ 24.131243] NET: Registered protocol family 16 [ 24.131486] EISA bus registered [ 24.131544] ACPI: bus type pci registered [ 24.160063] PCI: PCI BIOS revision 2.10 entry at 0xfacc6, last bus=12 [ 24.160122] PCI: Using configuration type 1 [ 24.160175] Setting up standard PCI resources [ 21.891219] ACPI: EC: Look up EC in DSDT [ 21.904058] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be A9 [20070126] [ 21.904211] ACPI: SSDT 7FE819CE, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) [ 21.904490] ACPI: Interpreter enabled [ 21.904546] ACPI: (supports S0 S3 S4 S5) [ 21.904760] ACPI: Using IOAPIC for interrupt routing [ 21.936621] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 21.937394] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 21.937455] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 21.938601] PCI: Transparent bridge - 0000:00:1e.0 [ 21.938743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 21.939134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 21.939221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 21.939353] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 21.939457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 21.939560] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT] [ 21.949326] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *3 [ 21.949706] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7) [ 21.950009] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11) [ 21.950339] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 21.950833] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 21.951489] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 21.952150] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 21.952806] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 21.953496] Linux Plug and Play Support v0.97 (c) Adam Belay [ 21.953582] pnp: PnP ACPI init [ 21.953641] ACPI: bus type pnp registered [ 21.968324] pnpacpi: exceeded the max number of mem resources: 12 [ 22.000487] pnp: PnP ACPI: found 14 devices [ 22.000543] ACPI: ACPI bus type pnp unregistered [ 22.000598] PnPBIOS: Disabled by ACPI PNP [ 24.275010] PCI: Using ACPI for IRQ routing [ 24.275067] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 24.342197] NET: Registered protocol family 8 [ 24.342253] NET: Registered protocol family 20 [ 24.342338] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 24.342548] hpet0: 3 64-bit timers, 14318180 Hz [ 24.343631] AppArmor: AppArmor Filesystem Enabled [ 22.071711] Time: hpet clocksource has been installed. [ 22.071826] Switched to high resolution mode on CPU 0 [ 24.346194] Switched to high resolution mode on CPU 1 [ 22.084699] system 00:00: iomem range 0x0-0x9fbff could not be reserved [ 22.084759] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 22.084817] system 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 22.084874] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 22.084932] system 00:00: iomem range 0x100000-0x7fe813ff could not be reserved [ 22.084999] system 00:00: iomem range 0x7fe81400-0x7fefffff could not be reserved [ 22.085067] system 00:00: iomem range 0x7ff00000-0x7fffffff could not be reserved [ 22.085134] system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved [ 22.085201] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 22.086539] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 22.086607] system 00:00: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 22.086675] system 00:00: iomem range 0xfed45000-0xfed9ffff could not be reserved [ 22.086745] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 22.086802] system 00:02: ioport range 0x1000-0x1005 has been reserved [ 22.086859] system 00:02: ioport range 0x1008-0x100f has been reserved [ 22.086918] system 00:03: ioport range 0xf400-0xf4fe has been reserved [ 22.086975] system 00:03: ioport range 0x1006-0x1007 has been reserved [ 22.087032] system 00:03: ioport range 0x100a-0x1059 could not be reserved [ 22.087089] system 00:03: ioport range 0x1060-0x107f has been reserved [ 22.087146] system 00:03: ioport range 0x1080-0x10bf has been reserved [ 22.087203] system 00:03: ioport range 0x10c0-0x10df has been reserved [ 22.087260] system 00:03: ioport range 0x1010-0x102f has been reserved [ 22.087317] system 00:03: ioport range 0x809-0x809 has been reserved [ 22.087378] system 00:08: ioport range 0xc80-0xcaf has been reserved [ 22.087435] system 00:08: ioport range 0xcc0-0xcff could not be reserved [ 22.087492] system 00:08: ioport range 0x910-0x91f has been reserved [ 22.087549] system 00:08: ioport range 0x920-0x92f has been reserved [ 22.087605] system 00:08: ioport range 0xcbc-0xcbf has been reserved [ 22.087673] system 00:08: ioport range 0x930-0x97f has been reserved [ 22.087734] system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved [ 22.087795] system 00:0d: ioport range 0xcb0-0xcbb has been reserved [ 22.087851] system 00:0d: iomem range 0xfed40000-0xfed44fff could not be reserved [ 22.118318] PCI: Bridge: 0000:00:01.0 [ 22.118373] IO window: disabled. [ 22.118427] MEM window: ed000000-efefffff [ 22.118482] PREFETCH window: d0000000-dfffffff [ 22.118537] PCI: Bridge: 0000:00:1c.0 [ 22.118590] IO window: disabled. [ 22.118645] MEM window: disabled. [ 22.118700] PREFETCH window: disabled. [ 22.118757] PCI: Bridge: 0000:00:1c.1 [ 22.118809] IO window: disabled. [ 22.118865] MEM window: ecf00000-ecffffff [ 22.118921] PREFETCH window: disabled. [ 22.118978] PCI: Bridge: 0000:00:1c.2 [ 22.119031] IO window: disabled. [ 22.119087] MEM window: ece00000-ecefffff [ 22.119143] PREFETCH window: disabled. [ 22.119206] PCI: Bus 4, cardbus bridge: 0000:03:01.0 [ 22.119260] IO window: 00001400-000014ff [ 22.119316] IO window: 00001800-000018ff [ 22.119372] PREFETCH window: 88000000-8bffffff [ 22.119429] MEM window: 8c000000-8fffffff [ 22.119487] PCI: Bridge: 0000:00:1e.0 [ 22.119540] IO window: disabled. [ 22.119596] MEM window: disabled. [ 22.119657] PREFETCH window: disabled. [ 22.119723] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 22.119833] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 22.119854] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 22.119964] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 22.119986] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 22.120096] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 22.120119] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 22.120229] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 22.120242] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 22.120258] PCI: Enabling device 0000:03:01.0 (0000 -> 0003) [ 22.120318] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 22.120435] NET: Registered protocol family 2 [ 22.159672] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 22.159926] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 22.160611] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 22.160978] TCP: Hash tables configured (established 131072 bind 65536) [ 22.161037] TCP reno registered [ 22.171754] checking if image is initramfs... it is [ 22.833497] Freeing initrd memory: 8120k freed [ 25.108469] audit: initializing netlink socket (disabled) [ 25.108538] audit(1212875361.548:1): initialized [ 22.834662] highmem bounce pool size: 64 pages [ 22.836593] VFS: Disk quotas dquot_6.5.1 [ 22.836720] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 22.836894] io scheduler noop registered [ 22.836950] io scheduler anticipatory registered [ 22.837004] io scheduler deadline registered [ 22.837066] io scheduler cfq registered (default) [ 22.837224] Boot video device is 0000:01:00.0 [ 22.837325] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 22.837356] assign_interrupt_mode Found MSI capability [ 22.837438] Allocate Port Service[0000:00:01.0:pcie00] [ 22.837514] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 22.837568] assign_interrupt_mode Found MSI capability [ 22.837666] Allocate Port Service[0000:00:1c.0:pcie00] [ 22.837699] Allocate Port Service[0000:00:1c.0:pcie02] [ 22.837796] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 22.837850] assign_interrupt_mode Found MSI capability [ 22.837948] Allocate Port Service[0000:00:1c.1:pcie00] [ 22.837981] Allocate Port Service[0000:00:1c.1:pcie02] [ 22.838077] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 22.838131] assign_interrupt_mode Found MSI capability [ 22.838228] Allocate Port Service[0000:00:1c.2:pcie00] [ 22.838264] Allocate Port Service[0000:00:1c.2:pcie02] [ 22.838513] isapnp: Scanning for PnP cards... [ 23.194089] isapnp: No Plug & Play device found [ 23.219589] Real Time Clock Driver v1.12ac [ 23.219789] hpet_resources: 0xfed00000 is busy [ 23.219842] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 23.220062] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 23.221185] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 23.221317] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 23.221478] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 23.224341] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 23.224403] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 25.525206] mice: PS/2 mouse device common for all mice [ 25.525371] EISA: Probing bus 0 at eisa.0 [ 25.525427] EISA: Cannot allocate resource for mainboard [ 25.525483] Cannot allocate resource for EISA slot 1 [ 25.525568] EISA: Detected 0 cards. [ 25.525624] cpuidle: using governor ladder [ 25.525677] cpuidle: using governor menu [ 25.525808] NET: Registered protocol family 1 [ 25.525888] Using IPI No-Shortcut mode [ 25.526017] swsusp: Resume From Partition /dev/sda7 [ 25.526019] PM: Checking swsusp image. [ 25.526027] swsusp: Error -6 check for resume file [ 25.526029] PM: Resume from disk failed. [ 25.526045] registered taskstats version 1 [ 25.526197] Magic number: 12:540:853 [ 25.526298] hash matches device ptyv5 [ 25.526390] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 25.526448] EDD information not available. [ 25.526669] Freeing unused kernel memory: 368k freed [ 25.528602] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 25.693045] fuse init (API version 7.9) [ 23.439480] ACPI: SSDT 7FE82138, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 23.439796] ACPI: SSDT 7FE81EED, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 23.440453] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 23.440665] ACPI: Processor [CPU0] (supports 8 throttling states) [ 23.440987] ACPI: SSDT 7FE8237C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 23.441286] ACPI: SSDT 7FE820B3, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 25.716166] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 25.716380] ACPI: Processor [CPU1] (supports 8 throttling states) [ 25.720261] ACPI: Thermal Zone [THM] (67 C) [ 25.736430] device-mapper: uevent: version 1.0.3 [ 25.736556] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 23.797492] usbcore: registered new interface driver usbfs [ 23.797573] usbcore: registered new interface driver hub [ 23.797654] usbcore: registered new device driver usb [ 23.799054] USB Universal Host Controller Interface driver v3.0 [ 23.799165] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 23.799285] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 23.799289] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 23.799587] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 23.799695] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000bf80 [ 23.799878] usb usb1: configuration #1 chosen from 1 choice [ 23.799955] hub 1-0:1.0: USB hub found [ 23.800013] hub 1-0:1.0: 2 ports detected [ 23.906687] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 23.906809] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 23.906813] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 23.906889] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 23.906988] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bf60 [ 23.907144] usb usb2: configuration #1 chosen from 1 choice [ 23.907221] hub 2-0:1.0: USB hub found [ 23.907279] hub 2-0:1.0: 2 ports detected [ 26.183188] SCSI subsystem initialized [ 26.213446] libata version 3.00 loaded. [ 24.010618] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 24.010739] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 24.010743] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 24.010820] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 24.010919] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bf40 [ 24.011075] usb usb3: configuration #1 chosen from 1 choice [ 24.011152] hub 3-0:1.0: USB hub found [ 24.011210] hub 3-0:1.0: 2 ports detected [ 24.114610] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22 [ 24.114729] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 24.114734] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 24.114813] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 24.116202] uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000bf20 [ 24.116364] usb usb4: configuration #1 chosen from 1 choice [ 24.116445] hub 4-0:1.0: USB hub found [ 24.116504] hub 4-0:1.0: 2 ports detected [ 24.146503] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 26.496698] tg3.c:v3.86 (November 9, 2007) [ 26.496789] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 26.496909] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 26.514521] eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:18:8b:be:6c:40 [ 26.514830] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 26.514898] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 26.515071] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 [ 26.515188] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 26.515191] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 26.515270] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 26.519252] ehci_hcd 0000:00:1d.7: debug port 1 [ 26.519313] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 26.519319] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80000 [ 26.545509] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 26.545690] usb usb5: configuration #1 chosen from 1 choice [ 26.545768] hub 5-0:1.0: USB hub found [ 26.545828] hub 5-0:1.0: 8 ports detected [ 26.648654] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 26.648799] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 26.648811] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 26.651312] ata_piix 0000:00:1f.2: version 2.12 [ 26.651319] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 26.651546] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 26.651678] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 26.651753] scsi0 : ata_piix [ 26.651848] scsi1 : ata_piix [ 26.653419] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 [ 26.653488] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 [ 24.542736] ata1.00: ATA-6: TOSHIBA MK1032GSX, AS022D, max UDMA/100 [ 24.542798] ata1.00: 195371568 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 24.551725] ata1.00: configured for UDMA/100 [ 24.670197] usb 1-2: device not accepting address 2, error -71 [ 27.160711] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L632D, DE04, max UDMA/33 [ 27.348538] ata2.00: configured for UDMA/33 [ 25.074608] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GS AS02 PQ: 0 ANSI: 5 [ 25.075400] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632D DE04 PQ: 0 ANSI: 5 [ 25.083825] Driver 'sd' needs updating - please use bus_type methods [ 25.083951] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 25.084025] sd 0:0:0:0: [sda] Write Protect is off [ 25.084085] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.084100] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.084212] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 25.084278] sd 0:0:0:0: [sda] Write Protect is off [ 25.084333] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.084348] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.084420] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 25.097945] usb 5-2: new high speed USB device using ehci_hcd and address 2 [ 25.120729] sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 > [ 25.181697] sd 0:0:0:0: [sda] Attached SCSI disk [ 25.186455] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 25.186532] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 27.460932] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 27.461027] Uniform CD-ROM driver Revision: 3.20 [ 27.461122] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 25.227354] usb 5-2: configuration #1 chosen from 1 choice [ 25.227522] hub 5-2:1.0: USB hub found [ 25.227626] hub 5-2:1.0: 4 ports detected [ 25.729613] usb 5-2.3: new full speed USB device using ehci_hcd and address 4 [ 25.827157] usb 5-2.3: configuration #1 chosen from 1 choice [ 25.827444] hub 5-2.3:1.0: USB hub found [ 25.827672] hub 5-2.3:1.0: 3 ports detected [ 28.149700] Attempting manual resume [ 28.149755] swsusp: Resume From Partition 8:7 [ 28.149756] PM: Checking swsusp image. [ 28.194383] PM: Resume from disk failed. [ 28.199403] swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 28.199409] swsusp: Basic memory bitmaps created [ 28.210747] swsusp: Basic memory bitmaps freed [ 28.269203] kjournald starting. Commit interval 5 seconds [ 25.995082] EXT3-fs: mounted filesystem with ordered data mode. [ 26.129400] usb 5-2.4: new full speed USB device using ehci_hcd and address 5 [ 26.275410] usb 5-2.4: configuration #1 chosen from 1 choice [ 26.513086] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 26.687647] usb 2-2: configuration #1 chosen from 1 choice [ 29.167107] usb 5-2.3.1: new full speed USB device using ehci_hcd and address 6 [ 26.982259] usb 5-2.3.1: configuration #1 chosen from 1 choice [ 27.180817] usb 5-2.3.2: new full speed USB device using ehci_hcd and address 7 [ 27.273660] usb 5-2.3.2: configuration #1 chosen from 1 choice [ 34.750343] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 35.372192] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 35.404009] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 33.339779] ACPI: Battery Slot [BAT0] (battery present) [ 33.340143] ACPI: Battery Slot [BAT1] (battery absent) [ 35.660132] input: Lid Switch as /devices/virtual/input/input3 [ 35.684480] ACPI: Lid Switch [LID] [ 35.684583] input: Power Button (CM) as /devices/virtual/input/input4 [ 33.452938] input: PS/2 Mouse as /devices/virtual/input/input5 [ 35.747954] ACPI: Power Button (CM) [PBTN] [ 35.748071] input: Sleep Button (CM) as /devices/virtual/input/input6 [ 35.780011] Yenta: CardBus bridge found at 0000:03:01.0 [1028:01c2] [ 35.780096] Yenta O2: res at 0x94/0xD4: 00/ea [ 35.780152] Yenta O2: enabling read prefetch/write burst [ 33.548782] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7 [ 35.859870] ACPI: Sleep Button (CM) [SBTN] [ 35.860480] ACPI: AC Adapter [AC] (on-line) [ 35.860603] ACPI: WMI-Acer: Mapper loaded [ 35.860788] irda_init() [ 35.860803] NET: Registered protocol family 23 [ 35.907033] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 35.908700] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18 [ 35.908758] Socket status: 30000410 [ 35.908812] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 35.975206] intel_rng: FWH not detected [ 36.012823] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/LNXVIDEO:00/input/input8 [ 36.055755] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 36.056311] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input9 [ 36.119748] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 36.119949] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:02/input/input10 [ 36.179677] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 36.471547] iTCO_vendor_support: vendor-support=0 [ 34.352858] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 34.353001] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 34.353093] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 34.427296] Linux agpgart interface v0.102 [ 34.708098] pccard: PCMCIA card inserted into slot 0 [ 37.245476] nvidia: module license 'NVIDIA' taints kernel. [ 37.548810] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 37.548928] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 37.549052] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 37.683524] Bluetooth: Core ver 2.11 [ 37.684647] NET: Registered protocol family 31 [ 37.684721] Bluetooth: HCI device and connection manager initialized [ 37.684790] Bluetooth: HCI socket layer initialized [ 37.975818] usbcore: registered new interface driver hiddev [ 35.719880] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input11 [ 35.759795] cs: IO port probe 0x100-0x3af: excluding 0x270-0x277 [ 35.761976] cs: IO port probe 0x3e0-0x4ff: clean. [ 35.762866] cs: IO port probe 0x820-0x8ff: clean. [ 35.763652] cs: IO port probe 0xc00-0xcf7: clean. [ 38.038574] input<6>cs: IO port probe 0xa00-0xaff:,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2 [ 38.039210] usbcore: registered new interface driver usbhid [ 38.039385] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 35.765442] clean. [ 35.765479] cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 35.786839] pcmcia: registering new device pcmcia0.0 [ 38.089717] Bluetooth: HCI USB driver ver 2.9 [ 35.817127] usbcore: registered new interface driver hci_usb [ 35.981912] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0 [ 35.981990] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 35.982180] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 35.982344] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 35.982364] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 36.263154] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels [ 36.275317] wmaster0: Selected rate control algorithm 'iwl-3945-rs' [ 38.607037] 0.0: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 38.812095] udev: renamed network interface wlan0 to eth1 [ 36.572607] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 36.572740] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 36.813518] lp: driver loaded but no devices found [ 39.186650] Adding 1951856k swap on /dev/sda7. Priority:-1 extents:1 across:1951856k [ 39.634692] EXT3 FS on dm-1, internal journal [ 43.683599] kjournald starting. Commit interval 5 seconds [ 41.409692] EXT3 FS on sda6, internal journal [ 41.409697] EXT3-fs: mounted filesystem with ordered data mode. [ 43.846597] kjournald starting. Commit interval 5 seconds [ 41.572753] EXT3 FS on dm-0, internal journal [ 41.572758] EXT3-fs: mounted filesystem with ordered data mode. [ 44.174925] kjournald starting. Commit interval 5 seconds [ 41.901088] EXT3 FS on dm-2, internal journal [ 41.901092] EXT3-fs: mounted filesystem with ordered data mode. [ 44.215099] kjournald starting. Commit interval 5 seconds [ 41.941244] EXT3 FS on dm-3, internal journal [ 41.941248] EXT3-fs: mounted filesystem with ordered data mode. [ 48.225372] ip_tables: (C) 2000-2006 Netfilter Core Team [ 49.714898] RPC: Registered udp transport module. [ 49.714902] RPC: Registered tcp transport module. [ 52.357390] pnp 00:0c: disabled [ 52.381138] pnp 00:0c: activated [ 50.153809] pnp 00:0c: disabled [ 50.178546] pnp 00:0c: activated [ 50.744923] ACPI: ACPI Dock Station Driver [ 53.026058] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay [ 53.026064] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler [ 53.026094] ACPI: Error installing bay notify handler [ 53.026098] ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added [ 52.223895] NET: Registered protocol family 10 [ 52.224140] lo: Disabled Privacy Extensions [ 52.915136] ppdev: user-space parallel port driver [ 53.261823] audit(1212868192.528:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5822 profile="/usr/sbin/cupsd" namespace="default" [ 57.683738] apm: BIOS not found. [ 58.775124] sirdev_get_instance - ttyS0 [ 58.775728] irtty_open - ttyS0: irda line discipline opened [ 62.051058] irlap_change_speed(), setting speed to 9600 [ 62.706773] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 62.897780] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 62.909336] NFSD: starting 90-second grace period [ 74.031859] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 74.094836] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 76.427687] Bluetooth: L2CAP ver 2.9 [ 76.427694] Bluetooth: L2CAP socket layer initialized [ 74.219512] Bluetooth: RFCOMM socket layer initialized [ 74.219532] Bluetooth: RFCOMM TTY layer initialized [ 74.219535] Bluetooth: RFCOMM ver 1.8 [ 75.447686] [6760]: VMCI: Driver initialized. [ 75.447766] [6760]: Module vmmon: registered with major=10 minor=165 [ 75.447809] [6760]: Module vmmon: initialized [ 75.963909] /dev/vmnet: open called by PID 6807 (vmnet-bridge) [ 75.963919] /dev/vmnet: hub 0 does not exist, allocating memory. [ 75.963929] /dev/vmnet: port on hub 0 successfully opened [ 75.963941] bridge-eth1: enabling the bridge [ 75.963946] bridge-eth1: is a Wireless Adapter [ 75.963949] vmnet: You are trying to use wireless bridged networking together with [ 75.963951] vmnet: vmware-any-any-update. This is not supported configuration, and [ 75.963952] vmnet: your wireless bridge will probably not work. [ 75.963956] bridge-eth1: up [ 75.963958] bridge-eth1: already up [ 75.963962] bridge-eth1: attached [ 78.454641] /dev/vmnet: open called by PID 6824 (vmnet-netifup) [ 78.454658] /dev/vmnet: hub 1 does not exist, allocating memory. [ 78.454679] /dev/vmnet: port on hub 1 successfully opened [ 78.598097] /dev/vmnet: open called by PID 6823 (vmnet-dhcpd) [ 78.598118] /dev/vmnet: port on hub 1 successfully opened [ 76.331550] /dev/vmnet: open called by PID 6843 (vmnet-netifup) [ 76.331564] /dev/vmnet: hub 8 does not exist, allocating memory. [ 76.331585] /dev/vmnet: port on hub 8 successfully opened [ 78.626849] /dev/vmnet: open called by PID 6846 (vmnet-dhcpd) [ 78.626875] /dev/vmnet: port on hub 8 successfully opened [ 76.385993] /dev/vmnet: open called by PID 6861 (vmnet-natd) [ 76.386019] /dev/vmnet: port on hub 8 successfully opened [ 88.512145] vmnet1: no IPv6 routers present [ 87.997254] vmnet8: no IPv6 routers present [ 967.260101] NET: Registered protocol family 17 [ 967.794039] eth1: Initial auth_alg=0 [ 967.794047] eth1: authenticate with AP 00:0f:66:56:f0:63 [ 967.795303] eth1: RX authentication from 00:0f:66:56:f0:63 (alg=0 transaction=2 status=0) [ 967.795307] eth1: authenticated [ 967.795309] eth1: associate with AP 00:0f:66:56:f0:63 [ 970.070871] eth1: RX AssocResp from 00:0f:66:56:f0:63 (capab=0x411 status=0 aid=2) [ 970.070876] eth1: associated [ 970.072600] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 988.878360] eth1: no IPv6 routers present