[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable) [ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 1142MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f7180 [ 0.000000] Entering add_active_range(0, 0, 521936) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 521936 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 521936 [ 0.000000] On node 0 totalpages: 521936 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2285 pages used for memmap [ 0.000000] HighMem zone: 290275 pages, LIFO batch:31 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7100 checksum 0 [ 0.000000] ACPI: RSDP 000F7100, 0024 (r2 TOSCPL) [ 0.000000] ACPI: XSDT 7F6D71EF, 009C (r1 TOSCPL TOSCPL00 6040000 LTP 0) [ 0.000000] ACPI: FACP 7F6DFB60, 00F4 (r3 TOSCPL CRESTLNE 6040000 ALAN 1) [ 0.000000] ACPI: DSDT 7F6D8618, 74D4 (r2 TOSCPL CRESTLNE 6040000 INTL 20060608) [ 0.000000] ACPI: FACS 7F6E2FC0, 0040 [ 0.000000] ACPI: APIC 7F6DFC54, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 7F6DFCBC, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 7F6DFCF4, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: TCPA 7F6DFD30, 0032 (r1 Intel CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: TMOR 7F6DFD62, 0026 (r1 PTLTD 6040000 PTL 3) [ 0.000000] ACPI: SLIC 7F6DFD88, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR 0) [ 0.000000] ACPI: OSFR 7F6DFEFE, 0072 (r1 TOSHIB A+2nd ID 6040000 TASM 4010000) [ 0.000000] ACPI: APIC 7F6DFF70, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7F6DFFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SSDT 7F6D836B, 02AD (r1 SataRe SataAhci 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D82C8, 00A3 (r1 BrtRef DD01BRT 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D7817, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D7771, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D728B, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] Built 1 zonelists. Total pages: 517859 [ 0.000000] Kernel command line: root=/dev/mapper/TSP--200-Root ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1995.061 MHz processor. [ 16.227493] Console: colour VGA+ 80x25 [ 16.227755] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 16.228004] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 16.298956] Memory: 2057644k/2087744k available (2015k kernel code, 28892k reserved, 915k data, 364k init, 1170240k highmem) [ 16.298963] virtual kernel memory layout: [ 16.298964] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 16.298965] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 16.298966] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 16.298967] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 16.298968] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 16.298969] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB) [ 16.298969] .text : 0xc0100000 - 0xc02f7e86 (2015 kB) [ 16.298972] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 16.299003] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 16.299127] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 16.299131] hpet0: 3 64-bit timers, 14318180 Hz [ 16.380104] Calibrating delay using timer specific routine.. 3994.23 BogoMIPS (lpj=7988463) [ 16.380123] Security Framework v1.0.0 initialized [ 16.380128] SELinux: Disabled at boot. [ 16.380137] Mount-cache hash table entries: 512 [ 16.380242] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 16.380248] monitor/mwait feature present. [ 16.380249] using mwait in idle threads. [ 16.380253] CPU: L1 I cache: 32K, L1 D cache: 32K [ 16.380255] CPU: L2 cache: 2048K [ 16.380257] CPU: Physical Processor ID: 0 [ 16.380258] CPU: Processor Core ID: 0 [ 16.380259] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 16.380268] Compat vDSO mapped to ffffe000. [ 16.380278] Checking 'hlt' instruction... OK. [ 16.396183] SMP alternatives: switching to UP code [ 16.396530] Early unpacking initramfs... done [ 16.671725] ACPI: Core revision 20070126 [ 16.671764] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 16.740897] CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d [ 16.740912] SMP alternatives: switching to SMP code [ 16.740982] Booting processor 1/1 eip 3000 [ 16.751159] Initializing CPU#1 [ 16.831846] Calibrating delay using timer specific routine.. 3990.02 BogoMIPS (lpj=7980050) [ 16.831851] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 16.831856] monitor/mwait feature present. [ 16.831858] CPU: L1 I cache: 32K, L1 D cache: 32K [ 16.831860] CPU: L2 cache: 2048K [ 16.831861] CPU: Physical Processor ID: 0 [ 16.831863] CPU: Processor Core ID: 1 [ 16.831864] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 16.832349] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d [ 16.832369] Total of 2 processors activated (7984.25 BogoMIPS). [ 16.832537] ENABLING IO-APIC IRQs [ 16.832733] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 16.979840] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 16.999842] Brought up 2 CPUs [ 17.055078] migration_cost=18 [ 17.055184] Booting paravirtualized kernel on bare hardware [ 17.055267] Time: 21:10:49 Date: 01/22/108 [ 17.055283] NET: Registered protocol family 16 [ 17.055351] EISA bus registered [ 17.055355] ACPI: bus type pci registered [ 17.055677] PCI: PCI BIOS revision 3.00 entry at 0xfddf1, last bus=13 [ 17.055679] PCI: Using configuration type 1 [ 17.055680] Setting up standard PCI resources [ 17.057958] ACPI: EC: Look up EC in DSDT [ 17.058765] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 17.066209] ACPI: System BIOS is requesting _OSI(Linux) [ 17.066211] ACPI: Please test with "acpi_osi=!Linux" [ 17.066212] Please send dmidecode to linux-acpi@vger.kernel.org [ 17.066689] ACPI: Interpreter enabled [ 17.066692] ACPI: (supports S0 S3 S4 S5) [ 17.066706] ACPI: Using IOAPIC for interrupt routing [ 17.112479] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 17.112515] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 17.112522] PCI: Probing PCI hardware (bus 00) [ 17.114619] PCI: Transparent bridge - 0000:00:1e.0 [ 17.114767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 17.115085] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 17.115203] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 17.115321] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 17.115439] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 17.115572] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 17.127225] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 17.127323] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 17.127417] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 17.127512] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 17.127607] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 17.127702] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 17.127799] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 17.127893] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 17.128007] Linux Plug and Play Support v0.97 (c) Adam Belay [ 17.128015] pnp: PnP ACPI init [ 17.128024] ACPI: bus type pnp registered [ 17.151878] pnp: PnP ACPI: found 10 devices [ 17.151881] ACPI: ACPI bus type pnp unregistered [ 17.151883] PnPBIOS: Disabled by ACPI PNP [ 17.151920] PCI: Using ACPI for IRQ routing [ 17.151922] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 17.265614] NET: Registered protocol family 8 [ 17.265616] NET: Registered protocol family 20 [ 17.265658] pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 17.265661] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 17.265663] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 17.265666] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 17.265672] pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 17.267608] Time: tsc clocksource has been installed. [ 17.267614] Switched to high resolution mode on CPU 0 [ 17.267686] Switched to high resolution mode on CPU 1 [ 17.295912] PCI: Bridge: 0000:00:1c.0 [ 17.295915] IO window: 2000-2fff [ 17.295921] MEM window: f0000000-f3ffffff [ 17.295926] PREFETCH window: f6000000-f7ffffff [ 17.295932] PCI: Bridge: 0000:00:1c.1 [ 17.295935] IO window: 3000-3fff [ 17.295941] MEM window: f4300000-f43fffff [ 17.295946] PREFETCH window: 8c000000-8c0fffff [ 17.295952] PCI: Bridge: 0000:00:1c.2 [ 17.295953] IO window: disabled. [ 17.295959] MEM window: f4400000-f44fffff [ 17.295963] PREFETCH window: disabled. [ 17.295969] PCI: Bridge: 0000:00:1c.3 [ 17.295970] IO window: disabled. [ 17.295976] MEM window: disabled. [ 17.295980] PREFETCH window: disabled. [ 17.295987] PCI: Bus 13, cardbus bridge: 0000:0c:04.0 [ 17.295989] IO window: 00004000-000040ff [ 17.295993] IO window: 00004400-000044ff [ 17.295998] PREFETCH window: 88000000-8bffffff [ 17.296004] MEM window: 90000000-93ffffff [ 17.296008] PCI: Bridge: 0000:00:1e.0 [ 17.296011] IO window: 4000-4fff [ 17.296017] MEM window: f4200000-f42fffff [ 17.296022] PREFETCH window: 88000000-8bffffff [ 17.296051] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 17.296057] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 17.296082] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 [ 17.296088] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 17.296112] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 17.296118] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 17.296142] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 17.296148] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 17.296162] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 17.296178] ACPI: PCI Interrupt 0000:0c:04.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 17.296191] NET: Registered protocol family 2 [ 17.347545] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 17.347603] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 17.348198] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 17.348407] TCP: Hash tables configured (established 131072 bind 65536) [ 17.348409] TCP reno registered [ 17.363638] checking if image is initramfs... it is [ 17.959491] Freeing initrd memory: 7835k freed [ 17.959589] Simple Boot Flag at 0x36 set to 0x1 [ 17.959968] audit: initializing netlink socket (disabled) [ 17.959982] audit(1203714649.280:1): initialized [ 17.960058] highmem bounce pool size: 64 pages [ 17.961562] VFS: Disk quotas dquot_6.5.1 [ 17.961601] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 17.961669] io scheduler noop registered [ 17.961671] io scheduler anticipatory registered [ 17.961673] io scheduler deadline registered [ 17.961684] io scheduler cfq registered (default) [ 17.961698] Boot video device is 0000:00:02.0 [ 17.961885] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 17.961944] assign_interrupt_mode Found MSI capability [ 17.961946] Allocate Port Service[0000:00:1c.0:pcie00] [ 17.961973] Allocate Port Service[0000:00:1c.0:pcie02] [ 17.962066] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 17.962124] assign_interrupt_mode Found MSI capability [ 17.962126] Allocate Port Service[0000:00:1c.1:pcie00] [ 17.962149] Allocate Port Service[0000:00:1c.1:pcie02] [ 17.962246] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 17.962305] assign_interrupt_mode Found MSI capability [ 17.962306] Allocate Port Service[0000:00:1c.2:pcie00] [ 17.962331] Allocate Port Service[0000:00:1c.2:pcie02] [ 17.962425] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 17.962483] assign_interrupt_mode Found MSI capability [ 17.962485] Allocate Port Service[0000:00:1c.3:pcie00] [ 17.962512] Allocate Port Service[0000:00:1c.3:pcie02] [ 17.962650] isapnp: Scanning for PnP cards... [ 18.316432] isapnp: No Plug & Play device found [ 18.332831] Real Time Clock Driver v1.12ac [ 18.333038] hpet_resources: 0xfed00000 is busy [ 18.333065] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 18.333946] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 18.334053] input: Macintosh mouse button emulation as /class/input/input0 [ 18.334118] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 18.367035] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 18.367038] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 18.367124] mice: PS/2 mouse device common for all mice [ 18.369231] EISA: Probing bus 0 at eisa.0 [ 18.369237] Cannot allocate resource for EISA slot 1 [ 18.369241] Cannot allocate resource for EISA slot 2 [ 18.369242] Cannot allocate resource for EISA slot 3 [ 18.369244] Cannot allocate resource for EISA slot 4 [ 18.369263] EISA: Detected 0 cards. [ 18.369334] TCP cubic registered [ 18.369347] NET: Registered protocol family 1 [ 18.369364] Using IPI No-Shortcut mode [ 18.369505] Magic number: 12:472:197 [ 18.369527] hash matches device ttys9 [ 18.369533] hash matches device ttypc [ 18.369583] hash matches device PNP0100:00 [ 18.369764] Freeing unused kernel memory: 364k freed [ 18.390987] input: AT Translated Set 2 keyboard as /class/input/input1 [ 19.532675] AppArmor: AppArmor initialized<5>audit(1203714650.780:2): type=1505 info="AppArmor initialized" pid=1265 [ 19.537526] fuse init (API version 7.8) [ 19.541155] Failure registering capabilities with primary security module. [ 19.572820] ACPI: SSDT 7F6D7F86, 027A (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 19.573026] ACPI: SSDT 7F6D7A76, 048B (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 19.573508] Monitor-Mwait will be used to enter C-1 state [ 19.573511] Monitor-Mwait will be used to enter C-2 state [ 19.573513] Monitor-Mwait will be used to enter C-3 state [ 19.573517] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 19.573521] ACPI: Processor [CPU0] (supports 8 throttling states) [ 19.573725] ACPI: SSDT 7F6D8200, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 19.573920] ACPI: SSDT 7F6D7F01, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 19.574445] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 19.574449] ACPI: Processor [CPU1] (supports 8 throttling states) [ 19.585787] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 3.096000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.100000] Time: hpet clocksource has been installed. [ 3.508000] usbcore: registered new interface driver usbfs [ 3.508000] usbcore: registered new interface driver hub [ 3.508000] usbcore: registered new device driver usb [ 3.512000] USB Universal Host Controller Interface driver v3.0 [ 3.512000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 3.512000] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 3.512000] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.512000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.512000] uhci_hcd 0000:00:1a.0: irq 17, io base 0x00001820 [ 3.512000] usb usb1: configuration #1 chosen from 1 choice [ 3.512000] hub 1-0:1.0: USB hub found [ 3.512000] hub 1-0:1.0: 2 ports detected [ 3.536000] SCSI subsystem initialized [ 3.540000] libata version 2.21 loaded. [ 3.616000] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 3.616000] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 3.616000] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.616000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 3.616000] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840 [ 3.616000] usb usb2: configuration #1 chosen from 1 choice [ 3.616000] hub 2-0:1.0: USB hub found [ 3.616000] hub 2-0:1.0: 2 ports detected [ 3.720000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 [ 3.720000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.720000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.720000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 3.720000] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001860 [ 3.720000] usb usb3: configuration #1 chosen from 1 choice [ 3.720000] hub 3-0:1.0: USB hub found [ 3.720000] hub 3-0:1.0: 2 ports detected [ 3.824000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 3.824000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.824000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.824000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 3.824000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 [ 3.824000] usb usb4: configuration #1 chosen from 1 choice [ 3.824000] hub 4-0:1.0: USB hub found [ 3.824000] hub 4-0:1.0: 2 ports detected [ 3.928000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 3.928000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.928000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.928000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 3.928000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 3.928000] usb usb5: configuration #1 chosen from 1 choice [ 3.928000] hub 5-0:1.0: USB hub found [ 3.928000] hub 5-0:1.0: 2 ports detected [ 4.000000] Clocksource tsc unstable (delta = -359523641 ns) [ 4.032000] ata_piix 0000:00:1f.1: version 2.11 [ 4.032000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 4.032000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 4.032000] scsi0 : ata_piix [ 4.032000] scsi1 : ata_piix [ 4.032000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14 [ 4.032000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15 [ 4.368000] ata1.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, TO04, max UDMA/33 [ 4.556000] ata1.00: configured for UDMA/33 [ 4.736000] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D TO04 PQ: 0 ANSI: 5 [ 4.736000] ahci 0000:00:1f.2: version 2.2 [ 4.736000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 4.832000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.832000] Uniform CD-ROM driver Revision: 3.20 [ 4.836000] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 4.836000] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 5.740000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 5.740000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 5.740000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 5.740000] scsi2 : ahci [ 5.740000] scsi3 : ahci [ 5.740000] scsi4 : ahci [ 5.740000] ata3: SATA max UDMA/133 cmd 0xf882a100 ctl 0x00000000 bmdma 0x00000000 irq 19 [ 5.740000] ata4: SATA max UDMA/133 cmd 0xf882a180 ctl 0x00000000 bmdma 0x00000000 irq 19 [ 5.740000] ata5: SATA max UDMA/133 cmd 0xf882a200 ctl 0x00000000 bmdma 0x00000000 irq 19 [ 6.224000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.224000] ata3.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC7DP, max UDMA/100 [ 6.224000] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 6.224000] ata3.00: configured for UDMA/100 [ 6.536000] ata4: SATA link down (SStatus 0 SControl 300) [ 6.848000] ata5: SATA link down (SStatus 0 SControl 300) [ 6.848000] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5 [ 6.848000] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 6.848000] r8169 Gigabit Ethernet driver 2.2LK loaded [ 6.848000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 6.848000] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 6.848000] eth0: RTL8101e at 0xf8890000, 00:1b:38:48:d7:29, XID 34200000 IRQ 16 [ 6.852000] ACPI: PCI Interrupt 0000:0c:04.1[B] -> GSI 17 (level, low) -> IRQ 16 [ 6.852000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 6.852000] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 6.852000] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 6.852000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 6.852000] ehci_hcd 0000:00:1a.7: debug port 1 [ 6.852000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 6.852000] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4704800 [ 6.856000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 6.856000] usb usb6: configuration #1 chosen from 1 choice [ 6.856000] hub 6-0:1.0: USB hub found [ 6.856000] hub 6-0:1.0: 4 ports detected [ 6.900000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f4206000-f42067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 6.904000] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 6.904000] sd 2:0:0:0: [sda] Write Protect is off [ 6.904000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.904000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.904000] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 6.904000] sd 2:0:0:0: [sda] Write Protect is off [ 6.904000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.904000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.904000] sda:<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21 [ 6.960000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 6.960000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 6.960000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 6.960000] ehci_hcd 0000:00:1d.7: debug port 1 [ 6.960000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 6.960000] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf4704c00 [ 6.964000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 6.964000] usb usb7: configuration #1 chosen from 1 choice [ 6.964000] hub 7-0:1.0: USB hub found [ 6.964000] hub 7-0:1.0: 6 ports detected [ 7.324000] sda1 sda2 [ 7.324000] sd 2:0:0:0: [sda] Attached SCSI disk [ 7.756000] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 7.936000] usb 5-1: configuration #1 chosen from 1 choice [ 7.944000] usbcore: registered new interface driver hiddev [ 7.960000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 [ 7.960000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1 [ 7.960000] usbcore: registered new interface driver usbhid [ 7.960000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 8.172000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f79ae40fb82] [ 19.452000] Attempting manual resume [ 19.452000] swsusp: Resume From Partition 254:2 [ 19.452000] PM: Checking swsusp image. [ 19.452000] PM: Resume from disk failed. [ 19.476000] kjournald starting. Commit interval 5 seconds [ 19.476000] EXT3-fs: mounted filesystem with ordered data mode. [ 25.688000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 25.800000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 25.920000] Linux agpgart interface v0.102 (c) Dave Jones [ 25.924000] agpgart: Detected an Intel 965GM Chipset. [ 25.924000] agpgart: Detected 7676K stolen memory. [ 25.936000] agpgart: AGP aperture is 256M @ 0xd0000000 [ 26.380000] Yenta: CardBus bridge found at 0000:0c:04.0 [1179:ff00] [ 26.380000] Yenta: Enabling burst memory read transactions [ 26.380000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 26.380000] Yenta: Routing CardBus interrupts to PCI [ 26.380000] Yenta TI: socket 0000:0c:04.0, mfunc 0x10a01b22, devctl 0x64 [ 26.568000] sdhci: Secure Digital Host Controller Interface driver [ 26.568000] sdhci: Copyright(c) Pierre Ossman [ 26.612000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17 [ 26.612000] Socket status: 30000006 [ 26.612000] Yenta: Raising subordinate bus# of parent bus (#0c) from #0d to #10 [ 26.612000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 26.612000] cs: IO port probe 0x4000-0x4fff: clean. [ 26.612000] pcmcia: parent PCI bridge Memory window: 0xf4200000 - 0xf42fffff [ 26.612000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 26.612000] sdhci: SDHCI controller found at 0000:0c:04.3 [104c:803c] (rev 0) [ 26.612000] ACPI: PCI Interrupt 0000:0c:04.3[C] -> GSI 18 (level, low) -> IRQ 18 [ 26.612000] mmc0: SDHCI at 0xf4206800 irq 18 DMA [ 26.628000] ACPI: PCI Interrupt 0000:0c:04.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 27.180000] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.0 [ 27.180000] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 27.180000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 27.180000] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 27.180000] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 27.216000] cs: IO port probe 0x100-0x3af: clean. [ 27.220000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 27.220000] cs: IO port probe 0x820-0x8ff: clean. [ 27.220000] cs: IO port probe 0xc00-0xcf7: clean. [ 27.220000] cs: IO port probe 0xa00-0xaff: clean. [ 27.460000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000 [ 27.460000] synaptics: Toshiba Satellite P200 detected, limiting rate to 40pps. [ 27.544000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 27.544000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 27.548000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 27.612000] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels [ 27.612000] wmaster0: Selected rate control algorithm 'iwl-4965-rs' [ 27.912000] NET: Registered protocol family 17 [ 29.432000] hda_intel: azx_get_response timeout, switching to polling mode... [ 29.624000] si3054: cannot initialize. EXT MID = 0000 [ 29.756000] loop: module loaded [ 29.856000] lp: driver loaded but no devices found [ 29.984000] Adding 2097144k swap on /dev/mapper/TSP--200-Swap. Priority:-1 extents:1 across:2097144k [ 30.420000] EXT3 FS on dm-1, internal journal [ 31.400000] kjournald starting. Commit interval 5 seconds [ 31.400000] EXT3 FS on dm-3, internal journal [ 31.400000] EXT3-fs: mounted filesystem with ordered data mode. [ 32.388000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 32.396000] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 32.404000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 32.416000] No dock devices found. [ 32.456000] ACPI: AC Adapter [ACAD] (on-line) [ 32.520000] input: Power Button (FF) as /class/input/input4 [ 32.520000] ACPI: Power Button (FF) [PWRF] [ 32.520000] input: Lid Switch as /class/input/input5 [ 32.520000] ACPI: Lid Switch [LID0] [ 32.520000] input: Power Button (CM) as /class/input/input6 [ 32.520000] ACPI: Power Button (CM) [PWRB] [ 32.620000] ACPI: Battery Slot [BAT1] (battery present) [ 33.612000] ppdev: user-space parallel port driver [ 33.856000] audit(1203714681.921:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5329 profile="/usr/sbin/cupsd" [ 33.888000] apm: BIOS not found. [ 34.188000] Failure registering capabilities with primary security module. [ 34.472000] Bluetooth: Core ver 2.11 [ 34.472000] NET: Registered protocol family 31 [ 34.472000] Bluetooth: HCI device and connection manager initialized [ 34.472000] Bluetooth: HCI socket layer initialized [ 34.492000] Bluetooth: L2CAP ver 2.8 [ 34.492000] Bluetooth: L2CAP socket layer initialized [ 34.568000] Bluetooth: RFCOMM socket layer initialized [ 34.568000] Bluetooth: RFCOMM TTY layer initialized [ 34.568000] Bluetooth: RFCOMM ver 1.8 [ 39.460000] [drm] Initialized drm 1.1.0 20060810 [ 39.464000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 39.464000] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 71.176000] NET: Registered protocol family 10 [ 71.176000] lo: Disabled Privacy Extensions [ 71.176000] ADDRCONF(NETDEV_UP): wlan0: link is not ready