[ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] Command line: root=UUID=ebb0a92b-3d24-4178-9275-b99817c75602 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable) [ 0.000000] BIOS-e820: 00000000bf6b0000 - 00000000bf6cb000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf6cb000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 784048) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1310720 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F76D0 checksum 0 [ 0.000000] ACPI: RSDP 000F76D0, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT BF6BEDBC, 0094 (r1 Sony VAIO 20070905 PTL 0) [ 0.000000] ACPI: FACP BF6C7BD2, 00F4 (r3 Sony VAIO 20070905 PTL 1) [ 0.000000] ACPI: DSDT BF6C041A, 7744 (r2 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: FACS BF6CAFC0, 0040 [ 0.000000] ACPI: APIC BF6C7CC6, 0068 (r1 Sony VAIO 20070905 PTL 5A) [ 0.000000] ACPI: HPET BF6C7D2E, 0038 (r1 Sony VAIO 20070905 PTL 5A) [ 0.000000] ACPI: MCFG BF6C7D66, 003C (r1 Sony VAIO 20070905 PTL 5A) [ 0.000000] ACPI: TCPA BF6C7DA2, 0032 (r1 Sony VAIO 20070905 PTL 5A52) [ 0.000000] ACPI: TMOR BF6C7DD4, 0026 (r1 Sony VAIO 20070905 PTL 3) [ 0.000000] ACPI: SLIC BF6C7DFA, 0176 (r1 Sony VAIO 20070905 PTL 1000000) [ 0.000000] ACPI: APIC BF6C7F70, 0068 (r1 Sony VAIO 20070905 PTL 0) [ 0.000000] ACPI: BOOT BF6C7FD8, 0028 (r1 Sony VAIO 20070905 PTL 1) [ 0.000000] ACPI: SSDT BF6C013D, 02DD (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT BF6C001B, 0122 (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT BF6BF3DC, 025F (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT BF6BF336, 00A6 (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT BF6BEE50, 04E6 (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 784048) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1310720 [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 784048 [ 0.000000] 0: 1048576 -> 1310720 [ 0.000000] On node 0 totalpages: 1046095 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1127 pages reserved [ 0.000000] DMA zone: 2816 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765672 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000bf6b0000 - 00000000bf6cb000 [ 0.000000] swsusp: Registered nosave memory region: 00000000bf6cb000 - 00000000c0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000c0000000 - 00000000e0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec10000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec10000 - 00000000fed00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fed14000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed14000 - 00000000fed1a000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed1c000 - 00000000fed90000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed90000 - 00000000fee00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ff000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 1027048 [ 0.000000] Kernel command line: root=UUID=ebb0a92b-3d24-4178-9275-b99817c75602 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 17.776642] time.c: Detected 2194.505 MHz processor. [ 17.777985] Console: colour VGA+ 80x25 [ 17.778003] Checking aperture... [ 17.778015] Calgary: detecting Calgary via BIOS EBDA area [ 17.778017] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 17.778019] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 17.816951] Placing software IO TLB between 0x103d000 - 0x503d000 [ 17.854181] Memory: 4034236k/5242880k available (2274k kernel code, 150144k reserved, 1181k data, 296k init) [ 17.854219] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 17.930868] Calibrating delay using timer specific routine.. 4393.36 BogoMIPS (lpj=8786739) [ 17.930897] Security Framework v1.0.0 initialized [ 17.930903] SELinux: Disabled at boot. [ 17.931189] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 17.933672] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 17.934784] Mount-cache hash table entries: 256 [ 17.934929] CPU: L1 I cache: 32K, L1 D cache: 32K [ 17.934932] CPU: L2 cache: 4096K [ 17.934934] CPU 0/0 -> Node 0 [ 17.934936] using mwait in idle threads. [ 17.934937] CPU: Physical Processor ID: 0 [ 17.934938] CPU: Processor Core ID: 0 [ 17.934944] CPU0: Thermal monitoring enabled (TM2) [ 17.934953] SMP alternatives: switching to UP code [ 17.935178] Early unpacking initramfs... done [ 18.228643] ACPI: Core revision 20070126 [ 18.228687] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 18.279563] Using local APIC timer interrupts. [ 18.325073] result 12468777 [ 18.325074] Detected 12.468 MHz APIC timer. [ 18.326382] SMP alternatives: switching to SMP code [ 18.326457] Booting processor 1/2 APIC 0x1 [ 18.336920] Initializing CPU#1 [ 18.414219] Calibrating delay using timer specific routine.. 4389.07 BogoMIPS (lpj=8778156) [ 18.414225] CPU: L1 I cache: 32K, L1 D cache: 32K [ 18.414227] CPU: L2 cache: 4096K [ 18.414229] CPU 1/1 -> Node 0 [ 18.414231] CPU: Physical Processor ID: 0 [ 18.414232] CPU: Processor Core ID: 1 [ 18.414237] CPU1: Thermal monitoring enabled (TM2) [ 18.414689] Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 18.418227] Brought up 2 CPUs [ 18.449402] migration_cost=15 [ 18.449556] NET: Registered protocol family 16 [ 18.449624] ACPI: bus type pci registered [ 18.449630] PCI: Using configuration type 1 [ 18.450674] ACPI: EC: Look up EC in DSDT [ 18.451229] ACPI: EC: GPE=0x17, ports=0x66, 0x62 [ 18.452391] ACPI: System BIOS is requesting _OSI(Linux) [ 18.452393] ACPI: Please test with "acpi_osi=!Linux" [ 18.452394] Please send dmidecode to linux-acpi@vger.kernel.org [ 18.454474] ACPI: Interpreter enabled [ 18.454476] ACPI: (supports S0 S3 S4 S5) [ 18.454491] ACPI: Using IOAPIC for interrupt routing [ 18.470035] ACPI: EC: GPE=0x17, ports=0x66, 0x62 [ 18.470071] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 18.470080] PCI: Probing PCI hardware (bus 00) [ 18.472627] PCI: Transparent bridge - 0000:00:1e.0 [ 18.472783] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 18.473123] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 18.473250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 18.473365] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 18.473481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 18.473614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 18.480689] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 18.480781] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 18.480871] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 18.480961] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 18.481050] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 18.481139] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 18.481229] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 18.481317] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 18.481410] Linux Plug and Play Support v0.97 (c) Adam Belay [ 18.481419] pnp: PnP ACPI init [ 18.481425] ACPI: bus type pnp registered [ 18.489892] pnp: PnP ACPI: found 12 devices [ 18.489894] ACPI: ACPI bus type pnp unregistered [ 18.489937] PCI: Using ACPI for IRQ routing [ 18.489939] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 18.490087] NET: Registered protocol family 8 [ 18.490088] NET: Registered protocol family 20 [ 18.490101] PCI-GART: No AMD northbridge found. [ 18.490107] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 18.490110] hpet0: 3 64-bit timers, 14318180 Hz [ 18.491169] pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 18.491172] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 18.491175] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 18.491177] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 18.491421] PCI: Bridge: 0000:00:1c.0 [ 18.491424] IO window: 2000-2fff [ 18.491430] MEM window: f6000000-f7ffffff [ 18.491435] PREFETCH window: f0000000-f1ffffff [ 18.491441] PCI: Bridge: 0000:00:1c.1 [ 18.491444] IO window: 3000-3fff [ 18.491450] MEM window: f8000000-f9ffffff [ 18.491455] PREFETCH window: f2000000-f3ffffff [ 18.491461] PCI: Bridge: 0000:00:1c.2 [ 18.491464] IO window: 4000-4fff [ 18.491470] MEM window: fa000000-fbffffff [ 18.491475] PREFETCH window: f4000000-f5ffffff [ 18.491481] PCI: Bridge: 0000:00:1c.3 [ 18.491484] IO window: 5000-5fff [ 18.491490] MEM window: c8000000-c9ffffff [ 18.491495] PREFETCH window: cc000000-cdffffff [ 18.491503] PCI: Bus 10, cardbus bridge: 0000:09:04.0 [ 18.491505] IO window: 00006000-000060ff [ 18.491510] IO window: 00006400-000064ff [ 18.491516] PREFETCH window: c4000000-c7ffffff [ 18.491521] MEM window: 140000000-143ffffff [ 18.491526] PCI: Bridge: 0000:00:1e.0 [ 18.491529] IO window: 6000-6fff [ 18.491535] MEM window: fc200000-fc2fffff [ 18.491540] PREFETCH window: c4000000-c7ffffff [ 18.491570] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 18.491576] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 18.491601] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 18.491606] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 18.491631] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 18.491636] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 18.491661] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 18.491666] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 18.491680] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 18.491699] ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 18.491710] NET: Registered protocol family 2 [ 18.494114] Time: hpet clocksource has been installed. [ 18.526166] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 18.527311] TCP established hash table entries: 524288 (order: 11, 12582912 bytes) [ 18.533743] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 18.534352] TCP: Hash tables configured (established 524288 bind 65536) [ 18.534355] TCP reno registered [ 18.546184] checking if image is initramfs... it is [ 19.174167] Freeing initrd memory: 7738k freed [ 19.177511] Simple Boot Flag at 0x36 set to 0x80 [ 19.178020] audit: initializing netlink socket (disabled) [ 19.178038] audit(1197538464.360:1): initialized [ 19.179761] VFS: Disk quotas dquot_6.5.1 [ 19.179802] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 19.179877] io scheduler noop registered [ 19.179879] io scheduler anticipatory registered [ 19.179881] io scheduler deadline registered [ 19.179957] io scheduler cfq registered (default) [ 19.179973] Boot video device is 0000:00:02.0 [ 19.183672] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 19.183734] assign_interrupt_mode Found MSI capability [ 19.183737] Allocate Port Service[0000:00:1c.0:pcie00] [ 19.183768] Allocate Port Service[0000:00:1c.0:pcie02] [ 19.183866] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 19.183928] assign_interrupt_mode Found MSI capability [ 19.183930] Allocate Port Service[0000:00:1c.1:pcie00] [ 19.183953] Allocate Port Service[0000:00:1c.1:pcie02] [ 19.184050] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 19.184111] assign_interrupt_mode Found MSI capability [ 19.184113] Allocate Port Service[0000:00:1c.2:pcie00] [ 19.184140] Allocate Port Service[0000:00:1c.2:pcie02] [ 19.184236] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 19.184297] assign_interrupt_mode Found MSI capability [ 19.184299] Allocate Port Service[0000:00:1c.3:pcie00] [ 19.184323] Allocate Port Service[0000:00:1c.3:pcie02] [ 19.200998] Real Time Clock Driver v1.12ac [ 19.201214] hpet_resources: 0xfed00000 is busy [ 19.201239] Linux agpgart interface v0.102 (c) Dave Jones [ 19.201241] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 19.202351] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 19.202454] input: Macintosh mouse button emulation as /class/input/input0 [ 19.202518] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 19.204731] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 19.204734] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 19.204833] mice: PS/2 mouse device common for all mice [ 19.204934] TCP cubic registered [ 19.204975] NET: Registered protocol family 1 [ 19.205143] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 19.205149] Freeing unused kernel memory: 296k freed [ 19.232225] input: AT Translated Set 2 keyboard as /class/input/input1 [ 20.340228] AppArmor: AppArmor initialized<5>audit(1197538465.524:2): type=1505 info="AppArmor initialized" pid=1277 [ 20.344994] fuse init (API version 7.8) [ 20.347928] Failure registering capabilities with primary security module. [ 20.385009] ACPI: SSDT BF6BFCD9, 027A (r1 Sony VAIO 20070905 PTL 20050624) [ 20.385199] ACPI: SSDT BF6BF63B, 0619 (r1 Sony VAIO 20070905 PTL 20050624) [ 20.387314] Monitor-Mwait will be used to enter C-1 state [ 20.387317] Monitor-Mwait will be used to enter C-2 state [ 20.387321] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 20.387324] ACPI: Processor [CPU0] (supports 8 throttling states) [ 20.387524] ACPI: SSDT BF6BFF53, 00C8 (r1 Sony VAIO 20070905 PTL 20050624) [ 20.387706] ACPI: SSDT BF6BFC54, 0085 (r1 Sony VAIO 20070905 PTL 20050624) [ 20.389986] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 20.389990] ACPI: Processor [CPU1] (supports 8 throttling states) [ 20.397482] ACPI: Thermal Zone [ATF0] (53 C) [ 20.398194] ACPI: Thermal Zone [DTS0] (50 C) [ 20.398914] ACPI: Thermal Zone [DTS1] (54 C) [ 20.693857] usbcore: registered new interface driver usbfs [ 20.693876] usbcore: registered new interface driver hub [ 20.693894] usbcore: registered new device driver usb [ 20.694472] USB Universal Host Controller Interface driver v3.0 [ 20.694550] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 20.694561] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 20.694565] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 20.694688] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 20.694720] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 20.694812] usb usb1: configuration #1 chosen from 1 choice [ 20.694832] hub 1-0:1.0: USB hub found [ 20.694837] hub 1-0:1.0: 2 ports detected [ 20.747459] SCSI subsystem initialized [ 20.757698] libata version 2.21 loaded. [ 20.795192] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 20 (level, low) -> IRQ 20 [ 20.795204] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 20.795207] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 20.795226] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 20.795255] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840 [ 20.795338] usb usb2: configuration #1 chosen from 1 choice [ 20.795358] hub 2-0:1.0: USB hub found [ 20.795363] hub 2-0:1.0: 2 ports detected [ 20.898995] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 20.899003] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 20.899006] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 20.899020] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 20.899048] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 20.899126] usb usb3: configuration #1 chosen from 1 choice [ 20.899142] hub 3-0:1.0: USB hub found [ 20.899147] hub 3-0:1.0: 2 ports detected [ 21.002861] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 23 (level, low) -> IRQ 23 [ 21.002868] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 21.002872] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 21.002885] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 21.002910] uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001880 [ 21.002983] usb usb4: configuration #1 chosen from 1 choice [ 21.003002] hub 4-0:1.0: USB hub found [ 21.003007] hub 4-0:1.0: 2 ports detected [ 21.106722] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 23 [ 21.106730] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 21.106733] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 21.106748] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 21.106774] uhci_hcd 0000:00:1d.2: irq 23, io base 0x000018a0 [ 21.106845] usb usb5: configuration #1 chosen from 1 choice [ 21.106864] hub 5-0:1.0: USB hub found [ 21.106868] hub 5-0:1.0: 2 ports detected [ 21.210698] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 20 (level, low) -> IRQ 20 [ 21.211656] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 21.211661] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 21.211709] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 21.211746] ehci_hcd 0000:00:1a.7: debug port 1 [ 21.211754] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 21.211761] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504800 [ 21.215649] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 21.215738] usb usb6: configuration #1 chosen from 1 choice [ 21.215762] hub 6-0:1.0: USB hub found [ 21.215768] hub 6-0:1.0: 4 ports detected [ 21.318495] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 [ 21.319386] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 21.319392] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 21.319444] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 21.319483] ehci_hcd 0000:00:1d.7: debug port 1 [ 21.319490] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 21.319498] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00 [ 21.323386] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 21.323460] usb usb7: configuration #1 chosen from 1 choice [ 21.323482] hub 7-0:1.0: USB hub found [ 21.323487] hub 7-0:1.0: 6 ports detected [ 21.426338] ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 21.476438] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fc206000-fc2067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 21.476671] ahci 0000:00:1f.2: version 2.2 [ 21.476692] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22 [ 22.201198] usb 6-2: new high speed USB device using ehci_hcd and address 3 [ 22.336507] usb 6-2: configuration #1 chosen from 1 choice [ 22.476856] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 22.476860] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 22.476865] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 22.477081] scsi0 : ahci [ 22.477116] scsi1 : ahci [ 22.477146] scsi2 : ahci [ 22.477213] ata1: SATA max UDMA/133 cmd 0xffffc20001462100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 [ 22.477218] ata2: SATA max UDMA/133 cmd 0xffffc20001462180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 [ 22.477222] ata3: SATA max UDMA/133 cmd 0xffffc20001462200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 [ 22.700534] usb 7-4: new high speed USB device using ehci_hcd and address 2 [ 22.744568] ieee1394: Host added: ID:BUS[0-00:1023] GUID[080046030293d09b] [ 22.898380] usb 7-4: configuration #1 chosen from 1 choice [ 22.960197] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 22.961367] ata1.00: ATA-7: ST91608220AS, 3.ALE, max UDMA/133 [ 22.961370] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 22.962134] ata1.00: configured for UDMA/133 [ 23.136047] usbcore: registered new interface driver libusual [ 23.139773] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 23.139777] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 23.140937] Initializing USB Mass Storage driver... [ 23.271779] ata2: SATA link down (SStatus 0 SControl 300) [ 23.375637] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 23.554017] usb 1-1: configuration #1 chosen from 1 choice [ 23.583390] ata3: SATA link down (SStatus 0 SControl 300) [ 23.583488] scsi 0:0:0:0: Direct-Access ATA ST91608220AS 3.AL PQ: 0 ANSI: 5 [ 23.584203] ata_piix 0000:00:1f.1: version 2.11 [ 23.584220] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 [ 23.584249] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 23.584409] scsi3 : ata_piix [ 23.584442] scsi4 : ata_piix [ 23.584497] ata4: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011810 irq 14 [ 23.584500] ata5: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011818 irq 15 [ 23.588389] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 23.588398] sd 0:0:0:0: [sda] Write Protect is off [ 23.588400] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.588410] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.588444] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 23.588451] sd 0:0:0:0: [sda] Write Protect is off [ 23.588453] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.588463] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.588466] sda: sda1 sda2 sda3 sda4 [ 23.635037] sd 0:0:0:0: [sda] Attached SCSI disk [ 23.637257] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.795104] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 23.903388] ata4.00: ATAPI: MATSHITADVD-RAM UJ-852S, 1.01, max UDMA/33 [ 24.006075] usb 5-1: configuration #1 chosen from 1 choice [ 24.010236] scsi5 : SCSI emulation for USB Mass Storage devices [ 24.010270] usb-storage: device found at 2 [ 24.010271] usb-storage: waiting for device to settle before scanning [ 24.010290] usbcore: registered new interface driver usb-storage [ 24.010292] USB Mass Storage support registered. [ 24.060751] kjournald starting. Commit interval 5 seconds [ 24.060758] EXT3-fs: mounted filesystem with ordered data mode. [ 24.075170] ata4.00: configured for UDMA/33 [ 24.243831] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.01 PQ: 0 ANSI: 5 [ 24.243879] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 29.006406] usb-storage: device scan complete [ 29.010482] scsi 5:0:0:0: Direct-Access Sony USB HS-CARD 4.82 PQ: 0 ANSI: 0 [ 29.014393] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 29.014427] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 30.223737] ip_tables: (C) 2000-2006 Netfilter Core Team [ 30.258021] Netfilter messages via NETLINK v0.30. [ 30.270357] nf_conntrack version 0.5.0 (8192 buckets, 65536 max) [ 31.666006] agpgart: Detected an Intel 965GM Chipset. [ 31.667604] agpgart: Detected 7676K stolen memory. [ 31.680831] agpgart: AGP aperture is 256M @ 0xd0000000 [ 31.718067] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 31.719592] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 31.726156] Yenta: CardBus bridge found at 0000:09:04.0 [104d:9008] [ 31.726181] Yenta: Using CSCINT to route CSC interrupts to PCI [ 31.726183] Yenta: Routing CardBus interrupts to PCI [ 31.726189] Yenta TI: socket 0000:09:04.0, mfunc 0x01a21b22, devctl 0x64 [ 31.952127] tpm_inf_pnp 00:09: Found TPM with ID IFX0102 [ 31.957064] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20 [ 31.957068] Socket status: 30000006 [ 31.957071] Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d [ 31.957077] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff [ 31.957080] pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff [ 31.957082] pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xc7ffffff [ 31.957425] ACPI: PCI Interrupt 0000:09:04.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 32.038317] Bluetooth: Core ver 2.11 [ 32.038353] NET: Registered protocol family 31 [ 32.038355] Bluetooth: HCI device and connection manager initialized [ 32.038357] Bluetooth: HCI socket layer initialized [ 32.076778] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 32.076813] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 32.077747] sky2 0000:07:00.0: v1.18 addr 0xfa000000 irq 18 Yukon-EC Ultra (0xb4) rev 3 [ 32.078170] sky2 eth0: addr 00:1a:80:57:41:ac [ 32.103364] input: PS/2 Mouse as /class/input/input2 [ 32.104085] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 32.104087] Uniform CD-ROM driver Revision: 3.20 [ 32.104122] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 32.107328] Bluetooth: HCI USB driver ver 2.9 [ 32.111220] usbcore: registered new interface driver hci_usb [ 32.118948] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 [ 32.140342] Linux video capture interface: v2.00 [ 32.149834] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.0 [ 32.149837] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 32.149923] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 32.149932] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 32.150799] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 32.307370] usbcam: registering driver r5u870 0.10.0 [ 32.307417] r5u870-0: Detected Sony VGP-VCC7 [ 32.335190] usbcore: registered new interface driver r5u870 [ 32.463430] usbcore: registered new interface driver uvcvideo [ 32.463433] USB Video Class driver (v0.1.0) [ 32.503629] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels [ 32.503793] wmaster0: Selected rate control algorithm 'iwl-4965-rs' [ 32.598844] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 32.599683] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 34.063927] lp: driver loaded but no devices found [ 34.202615] Adding 1044216k swap on /dev/sda4. Priority:-1 extents:1 across:1044216k [ 34.623347] EXT3 FS on sda1, internal journal [ 35.312826] kjournald starting. Commit interval 5 seconds [ 35.313095] EXT3 FS on sda3, internal journal [ 35.313099] EXT3-fs: mounted filesystem with ordered data mode. [ 35.872435] ACPI: AC Adapter [ACAD] (on-line) [ 35.986115] ACPI: Battery Slot [BAT1] (battery present) [ 35.992943] input: Power Button (CM) as /class/input/input4 [ 35.992963] ACPI: Power Button (CM) [PWRB] [ 35.992990] input: Lid Switch as /class/input/input5 [ 35.993003] ACPI: Lid Switch [LID0] [ 36.022144] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 36.030007] ACPI: ACPI Dock Station Driver [ 36.092640] ACPI Sony Notebook Control Driver v0.2 successfully installed [ 37.307393] sky2 eth0: enabling interface [ 38.045213] ppdev: user-space parallel port driver [ 38.258840] audit(1197538484.390:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5509 profile="/usr/sbin/cupsd" [ 40.241014] sony-laptop: Sony Programmable IO Control Driver v0.5. [ 40.241099] sony-laptop: detected Type2 model [ 40.245247] input: Sony Vaio Keys as /class/input/input6 [ 40.245407] input: Sony Vaio Jogdial as /class/input/input7 [ 40.261449] sony-laptop: device allocated minor is 63 [ 42.655746] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 42.655756] vboxdrv: Successfully done. [ 43.270858] Failure registering capabilities with primary security module. [ 47.634489] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 78.070642] NET: Registered protocol family 17 [ 79.976196] wlan0: Initial auth_alg=0 [ 79.976201] wlan0: authenticate with AP 00:16:01:59:bd:a4 [ 79.978025] wlan0: RX authentication from 00:16:01:59:bd:a4 (alg=0 transaction=2 status=0) [ 79.978027] wlan0: authenticated [ 79.978030] wlan0: associate with AP 00:16:01:59:bd:a4 [ 79.980354] wlan0: RX AssocResp from 00:16:01:59:bd:a4 (capab=0x411 status=0 aid=1) [ 79.980356] wlan0: associated [ 86.091965] NET: Registered protocol family 10 [ 86.092330] lo: Disabled Privacy Extensions [ 86.092586] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 96.762195] wlan0: no IPv6 routers present [ 1223.888763] wlan0: deauthenticate(reason=3) [ 1237.648479] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1240.789613] wlan0: Initial auth_alg=0 [ 1240.789624] wlan0: authenticate with AP 00:16:01:59:bd:a4 [ 1240.791489] wlan0: RX authentication from 00:16:01:59:bd:a4 (alg=0 transaction=2 status=0) [ 1240.791496] wlan0: authenticated [ 1240.791501] wlan0: associate with AP 00:16:01:59:bd:a4 [ 1240.793798] wlan0: RX AssocResp from 00:16:01:59:bd:a4 (capab=0x411 status=0 aid=1) [ 1240.793805] wlan0: associated [ 1240.805135] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1259.226353] wlan0: no IPv6 routers present