[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f680000 (usable) [ 0.000000] BIOS-e820: 000000007f680000 - 000000007f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 1142MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f7670 [ 0.000000] Entering add_active_range(0, 0, 521856) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 521856 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 521856 [ 0.000000] On node 0 totalpages: 521856 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2285 pages used for memmap [ 0.000000] HighMem zone: 290195 pages, LIFO batch:31 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F75E0 checksum 0 [ 0.000000] ACPI: RSDP 000F75E0, 0014 (r0 TOSCPL) [ 0.000000] ACPI: RSDT 7F687799, 0054 (r1 TOSCPL TOSCPL00 6040000 LTP 0) [ 0.000000] ACPI: FACP 7F68FC78, 0074 (r1 TOSCPL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: DSDT 7F689504, 6774 (r1 TOSCPL CALISTGA 6040000 INTL 20060608) [ 0.000000] ACPI: FACS 7F690FC0, 0040 [ 0.000000] ACPI: SLIC 7F68FCEC, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR 0) [ 0.000000] ACPI: APIC 7F68FE62, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 7F68FECA, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 7F68FF02, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: BOOT 7F68FFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: APIC 7F68FF70, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: SSDT 7F688EB1, 064F (r1 SataRe SataPri 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F68881F, 0692 (r1 SataRe SataSec 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F687D79, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F687CD3, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6877ED, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] Built 1 zonelists. Total pages: 517779 [ 0.000000] Kernel command line: root=UUID=474911ee-d8c8-4d61-b94a-95a83948ad05 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1729.183 MHz processor. [ 24.721399] Console: colour VGA+ 80x25 [ 24.721685] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 24.722072] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 24.836641] Memory: 2058040k/2087424k available (2015k kernel code, 28104k reserved, 916k data, 364k init, 1169920k highmem) [ 24.836651] virtual kernel memory layout: [ 24.836652] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 24.836653] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 24.836655] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 24.836656] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 24.836657] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 24.836659] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 24.836660] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 24.836664] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 24.836703] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 24.836849] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 24.836854] hpet0: 3 64-bit timers, 14318180 Hz [ 24.917841] Calibrating delay using timer specific routine.. 3461.91 BogoMIPS (lpj=6923835) [ 24.917867] Security Framework v1.0.0 initialized [ 24.917875] SELinux: Disabled at boot. [ 24.917891] Mount-cache hash table entries: 512 [ 24.918022] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 [ 24.918031] monitor/mwait feature present. [ 24.918032] using mwait in idle threads. [ 24.918037] CPU: L1 I cache: 32K, L1 D cache: 32K [ 24.918040] CPU: L2 cache: 1024K [ 24.918043] CPU: Physical Processor ID: 0 [ 24.918045] CPU: Processor Core ID: 0 [ 24.918047] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000 [ 24.918056] Compat vDSO mapped to ffffe000. [ 24.918069] Checking 'hlt' instruction... OK. [ 24.933958] SMP alternatives: switching to UP code [ 24.934439] Early unpacking initramfs... done [ 25.269579] ACPI: Core revision 20070126 [ 25.269648] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 25.303938] CPU0: Intel Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c [ 25.303956] SMP alternatives: switching to SMP code [ 25.304089] Booting processor 1/1 eip 3000 [ 25.314189] Initializing CPU#1 [ 25.393632] Calibrating delay using timer specific routine.. 3458.06 BogoMIPS (lpj=6916129) [ 25.393639] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 [ 25.393645] monitor/mwait feature present. [ 25.393648] CPU: L1 I cache: 32K, L1 D cache: 32K [ 25.393650] CPU: L2 cache: 1024K [ 25.393652] CPU: Physical Processor ID: 0 [ 25.393654] CPU: Processor Core ID: 1 [ 25.393656] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000 [ 25.394054] CPU1: Intel Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c [ 25.394080] Total of 2 processors activated (6919.98 BogoMIPS). [ 25.394280] ENABLING IO-APIC IRQs [ 25.394494] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 25.541670] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 25.561680] Brought up 2 CPUs [ 25.633151] migration_cost=50 [ 25.633290] Booting paravirtualized kernel on bare hardware [ 25.633382] Time: 11:40:15 Date: 11/07/107 [ 25.633403] NET: Registered protocol family 16 [ 25.633493] EISA bus registered [ 25.633499] ACPI: bus type pci registered [ 25.633651] PCI: BIOS BUG #81[49435000] found [ 25.633709] PCI: Using configuration type 1 [ 25.633711] Setting up standard PCI resources [ 25.638319] ACPI: EC: Look up EC in DSDT [ 25.639068] ACPI: EC: GPE=0x19, ports=0x66, 0x62 [ 25.643749] ACPI: System BIOS is requesting _OSI(Linux) [ 25.643752] ACPI: Please test with "acpi_osi=!Linux" [ 25.643753] Please send dmidecode to linux-acpi@vger.kernel.org [ 25.644056] ACPI: Interpreter enabled [ 25.644059] ACPI: (supports S0 S3 S4 S5) [ 25.644076] ACPI: Using IOAPIC for interrupt routing [ 25.690490] ACPI: EC: GPE=0x19, ports=0x66, 0x62 [ 25.690553] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 25.690562] PCI: Probing PCI hardware (bus 00) [ 25.691323] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 25.691327] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 25.692327] PCI: Transparent bridge - 0000:00:1e.0 [ 25.692466] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 25.692789] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 25.692924] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 25.693057] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 25.693201] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 25.700093] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 25.700197] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 25.700299] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 25.700400] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 25.700500] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 25.700602] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 25.700703] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 25.700803] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 25.700930] Linux Plug and Play Support v0.97 (c) Adam Belay [ 25.700940] pnp: PnP ACPI init [ 25.700954] ACPI: bus type pnp registered [ 25.721726] pnp: PnP ACPI: found 10 devices [ 25.721729] ACPI: ACPI bus type pnp unregistered [ 25.721733] PnPBIOS: Disabled by ACPI PNP [ 25.721784] PCI: Using ACPI for IRQ routing [ 25.721787] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 25.721897] NET: Registered protocol family 8 [ 25.721899] NET: Registered protocol family 20 [ 25.721957] pnp: 00:01: ioport range 0xfe00-0xfe7f has been reserved [ 25.721960] pnp: 00:01: ioport range 0xfe80-0xfeff has been reserved [ 25.721963] pnp: 00:01: ioport range 0xff00-0xff7f has been reserved [ 25.721967] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 25.721970] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 25.721974] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 25.721977] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 25.721984] pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 25.725495] Time: tsc clocksource has been installed. [ 25.725513] Switched to high resolution mode on CPU 0 [ 25.725602] Switched to high resolution mode on CPU 1 [ 25.752289] PCI: Bridge: 0000:00:1c.0 [ 25.752292] IO window: 2000-2fff [ 25.752299] MEM window: d6000000-d7ffffff [ 25.752304] PREFETCH window: d0000000-d1ffffff [ 25.752310] PCI: Bridge: 0000:00:1c.1 [ 25.752314] IO window: 3000-3fff [ 25.752320] MEM window: d8000000-d9ffffff [ 25.752325] PREFETCH window: d2000000-d3ffffff [ 25.752331] PCI: Bridge: 0000:00:1c.2 [ 25.752335] IO window: 4000-4fff [ 25.752341] MEM window: da000000-dbffffff [ 25.752345] PREFETCH window: d4000000-d5ffffff [ 25.752358] PCI: Bus 7, cardbus bridge: 0000:06:04.0 [ 25.752360] IO window: 00005000-000050ff [ 25.752365] IO window: 00005400-000054ff [ 25.752370] PREFETCH window: 88000000-8bffffff [ 25.752375] MEM window: 8c000000-8fffffff [ 25.752380] PCI: Bridge: 0000:00:1e.0 [ 25.752384] IO window: 5000-5fff [ 25.752390] MEM window: dc000000-dc0fffff [ 25.752395] PREFETCH window: 88000000-8bffffff [ 25.752427] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 25.752435] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 25.752460] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 [ 25.752466] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 25.752491] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 25.752497] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 25.752511] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 25.752530] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 25.752546] NET: Registered protocol family 2 [ 25.801458] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 25.801534] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 25.802617] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 25.803004] TCP: Hash tables configured (established 131072 bind 65536) [ 25.803008] TCP reno registered [ 25.817589] checking if image is initramfs... it is [ 26.482341] Freeing initrd memory: 7046k freed [ 26.482465] Simple Boot Flag at 0x36 set to 0x1 [ 26.483000] audit: initializing netlink socket (disabled) [ 26.483015] audit(1197027615.236:1): initialized [ 26.483117] highmem bounce pool size: 64 pages [ 26.485212] VFS: Disk quotas dquot_6.5.1 [ 26.485271] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 26.485370] io scheduler noop registered [ 26.485372] io scheduler anticipatory registered [ 26.485374] io scheduler deadline registered [ 26.485391] io scheduler cfq registered (default) [ 26.485407] Boot video device is 0000:00:02.0 [ 26.485583] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 26.485642] assign_interrupt_mode Found MSI capability [ 26.485645] Allocate Port Service[0000:00:1c.0:pcie00] [ 26.485685] Allocate Port Service[0000:00:1c.0:pcie02] [ 26.485788] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 26.485846] assign_interrupt_mode Found MSI capability [ 26.485849] Allocate Port Service[0000:00:1c.1:pcie00] [ 26.485881] Allocate Port Service[0000:00:1c.1:pcie02] [ 26.485984] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 26.486042] assign_interrupt_mode Found MSI capability [ 26.486045] Allocate Port Service[0000:00:1c.2:pcie00] [ 26.486077] Allocate Port Service[0000:00:1c.2:pcie02] [ 26.486248] isapnp: Scanning for PnP cards... [ 26.840012] isapnp: No Plug & Play device found [ 26.866469] Real Time Clock Driver v1.12ac [ 26.866710] hpet_resources: 0xfed00000 is busy [ 26.866744] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 26.868006] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 26.868143] input: Macintosh mouse button emulation as /class/input/input0 [ 26.868225] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 26.868527] i8042.c: Detected active multiplexing controller, rev 1.1. [ 26.868603] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 26.868608] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 26.868611] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 26.868614] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 26.868616] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 26.868772] mice: PS/2 mouse device common for all mice [ 26.868961] EISA: Probing bus 0 at eisa.0 [ 26.868969] Cannot allocate resource for EISA slot 1 [ 26.868972] Cannot allocate resource for EISA slot 2 [ 26.868975] Cannot allocate resource for EISA slot 3 [ 26.868977] Cannot allocate resource for EISA slot 4 [ 26.868979] Cannot allocate resource for EISA slot 5 [ 26.868995] EISA: Detected 0 cards. [ 26.869101] TCP cubic registered [ 26.869122] NET: Registered protocol family 1 [ 26.869147] Using IPI No-Shortcut mode [ 26.869614] Magic number: 3:859:680 [ 26.869964] Freeing unused kernel memory: 364k freed [ 26.874805] input: AT Translated Set 2 keyboard as /class/input/input1 [ 28.076737] AppArmor: AppArmor initialized<5>audit(1197027616.736:2): type=1505 info="AppArmor initialized" pid=1238 [ 28.085316] fuse init (API version 7.8) [ 28.091175] Failure registering capabilities with primary security module. [ 28.128901] ACPI: SSDT 7F68851F, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 28.129132] ACPI: SSDT 7F687FD8, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 28.129465] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 28.129707] ACPI: SSDT 7F688757, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 28.129916] ACPI: SSDT 7F68849A, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 28.130287] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 3.152000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.156000] Time: hpet clocksource has been installed. [ 3.648000] usbcore: registered new interface driver usbfs [ 3.648000] usbcore: registered new interface driver hub [ 3.648000] usbcore: registered new device driver usb [ 3.652000] USB Universal Host Controller Interface driver v3.0 [ 3.652000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 3.652000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.652000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.652000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.652000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820 [ 3.652000] usb usb1: configuration #1 chosen from 1 choice [ 3.652000] hub 1-0:1.0: USB hub found [ 3.652000] hub 1-0:1.0: 2 ports detected [ 3.656000] SCSI subsystem initialized [ 3.664000] libata version 2.21 loaded. [ 3.756000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 [ 3.756000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.756000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.756000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 3.756000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840 [ 3.756000] usb usb2: configuration #1 chosen from 1 choice [ 3.756000] hub 2-0:1.0: USB hub found [ 3.756000] hub 2-0:1.0: 2 ports detected [ 3.860000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 3.860000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.860000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.860000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 3.860000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 3.860000] usb usb3: configuration #1 chosen from 1 choice [ 3.860000] hub 3-0:1.0: USB hub found [ 3.860000] hub 3-0:1.0: 2 ports detected [ 3.964000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17 [ 3.964000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 3.964000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.964000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 3.964000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880 [ 3.964000] usb usb4: configuration #1 chosen from 1 choice [ 3.964000] hub 4-0:1.0: USB hub found [ 3.964000] hub 4-0:1.0: 2 ports detected [ 4.000000] Clocksource tsc unstable (delta = -186164143 ns) [ 4.068000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 [ 4.068000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 4.068000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.068000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 4.068000] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.068000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 4.068000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdc444000 [ 4.100000] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 4.100000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.100000] usb usb5: configuration #1 chosen from 1 choice [ 4.100000] hub 5-0:1.0: USB hub found [ 4.100000] hub 5-0:1.0: 8 ports detected [ 4.204000] ata_piix 0000:00:1f.2: version 2.11 [ 4.204000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 4.364000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 [ 4.364000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 4.364000] scsi0 : ata_piix [ 4.364000] scsi1 : ata_piix [ 4.364000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14 [ 4.364000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15 [ 4.536000] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC7DP, max UDMA/100 [ 4.536000] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.552000] ata1.00: configured for UDMA/100 [ 4.628000] usb 2-1: new low speed USB device using uhci_hcd and address 3 [ 4.804000] usb 2-1: configuration #1 chosen from 1 choice [ 4.828000] usbcore: registered new interface driver hiddev [ 4.844000] input: Logitech USB Receiver as /class/input/input2 [ 4.844000] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1 [ 4.860000] hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1 [ 4.860000] usbcore: registered new interface driver usbhid [ 4.860000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 4.900000] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, TO04, max UDMA/33 [ 5.120000] ata2.00: configured for UDMA/33 [ 5.120000] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5 [ 5.128000] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D TO04 PQ: 0 ANSI: 5 [ 5.128000] ACPI: PCI Interrupt 0000:06:04.1[B] -> GSI 17 (level, low) -> IRQ 16 [ 5.176000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[dc005000-dc0057ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 5.176000] r8169 Gigabit Ethernet driver 2.2LK loaded [ 5.176000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 5.176000] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 5.176000] eth0: RTL8101e at 0xf887e000, 00:1b:38:1d:d1:ae, XID 34200000 IRQ 18 [ 5.180000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 5.184000] sd 0:0:0:0: [sda] Write Protect is off [ 5.184000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.184000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.184000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 5.184000] sd 0:0:0:0: [sda] Write Protect is off [ 5.184000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.184000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.184000] sda: sda1 sda2 < sda5 > [ 5.636000] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.640000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.640000] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.708000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.708000] Uniform CD-ROM driver Revision: 3.20 [ 5.708000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.836000] Attempting manual resume [ 5.836000] swsusp: Resume From Partition 8:5 [ 5.836000] PM: Checking swsusp image. [ 5.836000] PM: Resume from disk failed. [ 5.880000] kjournald starting. Commit interval 5 seconds [ 5.880000] EXT3-fs: mounted filesystem with ordered data mode. [ 6.472000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f77bb40d173] [ 14.128000] Linux agpgart interface v0.102 (c) Dave Jones [ 14.160000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 14.164000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.364000] agpgart: Detected an Intel 945GM Chipset. [ 14.368000] agpgart: Detected 7932K stolen memory. [ 14.384000] agpgart: AGP aperture is 256M @ 0xc0000000 [ 14.388000] Yenta: CardBus bridge found at 0000:06:04.0 [1179:ff00] [ 14.388000] Yenta: Enabling burst memory read transactions [ 14.388000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 14.392000] Yenta: Routing CardBus interrupts to PCI [ 14.392000] Yenta TI: socket 0000:06:04.0, mfunc 0x10aa1b22, devctl 0x64 [ 14.496000] intel_rng: FWH not detected [ 14.548000] sdhci: Secure Digital Host Controller Interface driver [ 14.548000] sdhci: Copyright(c) Pierre Ossman [ 14.612000] input: PS/2 Mouse as /class/input/input3 [ 14.624000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17 [ 14.624000] Socket status: 30000006 [ 14.624000] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a [ 14.624000] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff [ 14.624000] cs: IO port probe 0x5000-0x5fff: clean. [ 14.624000] pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff [ 14.624000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 14.628000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input4 [ 14.632000] sdhci: SDHCI controller found at 0000:06:04.3 [104c:803c] (rev 0) [ 14.632000] ACPI: PCI Interrupt 0000:06:04.3[C] -> GSI 18 (level, low) -> IRQ 18 [ 14.632000] mmc0: SDHCI at 0xdc005800 irq 18 DMA [ 14.648000] iTCO_vendor_support: vendor-support=0 [ 14.648000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 14.648000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 14.648000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 14.744000] ACPI: PCI Interrupt 0000:06:04.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 14.868000] usbcore: registered new interface driver xpad [ 14.868000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6 [ 14.984000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 [ 14.984000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 15.196000] cs: IO port probe 0x100-0x3af: clean. [ 15.200000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 15.200000] cs: IO port probe 0x820-0x8ff: clean. [ 15.200000] cs: IO port probe 0xc00-0xcf7: clean. [ 15.200000] cs: IO port probe 0xa00-0xaff: clean. [ 15.932000] si3054: cannot initialize. EXT MID = 0000 [ 16.128000] lp: driver loaded but no devices found [ 16.224000] ndiswrapper version 1.45 loaded (smp=yes) [ 16.304000] ndiswrapper: driver net5211 (,11/15/2006,5.1.1.9) loaded [ 16.308000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 16.308000] ndiswrapper (ZwClose:2247): closing handle 0xdfbe9128 not implemented [ 16.308000] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 16.720000] ndiswrapper: using IRQ 16 [ 16.920000] wlan0: ethernet device 00:1b:9e:3d:f5:9d using serialized NDIS driver: net5211, version: 0x50001, NDIS version: 0x501, vendor: '', 168C:001C.5.conf [ 16.924000] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 16.928000] usbcore: registered new interface driver ndiswrapper [ 17.116000] Adding 6048432k swap on /dev/sda5. Priority:-1 extents:1 across:6048432k [ 17.412000] NET: Registered protocol family 17 [ 17.944000] EXT3 FS on sda1, internal journal [ 21.232000] No dock devices found. [ 21.380000] ACPI: Battery Slot [BAT1] (battery present) [ 21.400000] input: Power Button (FF) as /class/input/input5 [ 21.400000] ACPI: Power Button (FF) [PWRF] [ 21.400000] input: Lid Switch as /class/input/input6 [ 21.400000] ACPI: Lid Switch [LID0] [ 21.400000] input: Power Button (CM) as /class/input/input7 [ 21.400000] ACPI: Power Button (CM) [PWRB] [ 21.508000] ACPI: AC Adapter [ACAD] (on-line) [ 21.560000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 21.568000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 22.628000] ppdev: user-space parallel port driver [ 22.856000] audit(1197027637.645:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5113 profile="/usr/sbin/cupsd" [ 22.948000] apm: BIOS not found. [ 23.424000] Failure registering capabilities with primary security module. [ 23.664000] Bluetooth: Core ver 2.11 [ 23.664000] NET: Registered protocol family 31 [ 23.664000] Bluetooth: HCI device and connection manager initialized [ 23.664000] Bluetooth: HCI socket layer initialized [ 23.680000] Bluetooth: L2CAP ver 2.8 [ 23.680000] Bluetooth: L2CAP socket layer initialized [ 23.804000] Bluetooth: RFCOMM socket layer initialized [ 23.804000] Bluetooth: RFCOMM TTY layer initialized [ 23.804000] Bluetooth: RFCOMM ver 1.8 [ 26.452000] NET: Registered protocol family 10 [ 26.452000] lo: Disabled Privacy Extensions [ 26.452000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 28.732000] [drm] Initialized drm 1.1.0 20060810 [ 28.748000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 28.748000] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 31.664000] r8169: eth0: link down [ 31.668000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.692000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 31.836000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 32.036000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 42.336000] wlan0: no IPv6 routers present