[ 0.000000] Linux version 2.6.24-5-generic (buildd@yellow) (gcc version 4.2.3 20080114 (prerelease) (Ubuntu 4.2.2-7ubuntu1)) #1 SMP Thu Jan 24 19:29:14 UTC 2008 (Ubuntu 2.6.24-5.8-generic) [ 0.000000] Command line: root=UUID=84c70404-b16e-4f22-b824-38b775014fda ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff00000 (usable) [ 0.000000] BIOS-e820: 000000003ff00000 - 000000003ff15000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff15000 - 000000003ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 261888) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F88F0 checksum 0 [ 0.000000] ACPI: RSDP 000F88F0, 0014 (r0 HP ) [ 0.000000] ACPI: RSDT 3FF0BB67, 0040 (r1 HPQOEM SLIC-MPC 6040000 LTP 0) [ 0.000000] ACPI: FACP 3FF14B58, 0074 (r1 HP MCP51M 6040000 PTL_ F4240) [ 0.000000] ACPI: DSDT 3FF0BBA7, 8FB1 (r1 HP MCP51M 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS 3FF15FC0, 0040 [ 0.000000] ACPI: SSDT 3FF14BCC, 01C4 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: MCFG 3FF14D90, 003C (r1 HP MCFG 6040000 LTP 0) [ 0.000000] ACPI: HPET 3FF14DCC, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: APIC 3FF14E04, 005E (r1 HP APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 3FF14E62, 0028 (r1 HP $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC 3FF14E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] CPU has 2 num_cores [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003ff00000 [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 261888) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000003ff00000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 157 [ 0.000000] 0: 256 -> 261888 [ 0.000000] On node 0 totalpages: 261789 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1206 pages reserved [ 0.000000] DMA zone: 2735 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3524 pages used for memmap [ 0.000000] DMA32 zone: 254268 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 257003 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=84c70404-b16e-4f22-b824-38b775014fda ro [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 21.780307] Marking TSC unstable due to TSCs unsynchronized [ 21.780309] time.c: Detected 1808.230 MHz processor. [ 21.782960] Console: colour VGA+ 80x25 [ 21.782963] console [tty0] enabled [ 21.786545] Checking aperture... [ 21.786596] CPU 0: aperture @ 83f0000000 size 32 MB [ 21.786648] Aperture too small (32 MB) [ 21.793602] No AGP bridge found [ 21.805260] Memory: 1020244k/1047552k available (2460k kernel code, 26912k reserved, 1302k data, 316k init) [ 21.805355] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 21.882236] Calibrating delay using timer specific routine.. 3619.56 BogoMIPS (lpj=7239128) [ 21.882369] Security Framework initialized [ 21.882423] SELinux: Disabled at boot. [ 21.882484] AppArmor: AppArmor initialized [ 21.882537] Failure registering capabilities with primary security module. [ 21.882685] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 21.883453] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 21.883844] Mount-cache hash table entries: 256 [ 21.884026] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 21.884081] CPU: L2 Cache: 512K (64 bytes/line) [ 21.884133] CPU 0/0 -> Node 0 [ 21.884183] CPU: Physical Processor ID: 0 [ 21.884234] CPU: Processor Core ID: 0 [ 21.884306] SMP alternatives: switching to UP code [ 21.884930] Early unpacking initramfs... done [ 22.221999] ACPI: Core revision 20070126 [ 22.222148] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 22.626094] Using local APIC timer interrupts. [ 22.681422] APIC timer calibration result 12557015 [ 22.681425] Detected 12.557 MHz APIC timer. [ 22.681586] SMP alternatives: switching to SMP code [ 22.682120] Booting processor 1/2 APIC 0x1 [ 22.692877] Initializing CPU#1 [ 22.769791] Calibrating delay using timer specific routine.. 3616.48 BogoMIPS (lpj=7232974) [ 22.769798] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 22.769800] CPU: L2 Cache: 512K (64 bytes/line) [ 22.769802] CPU 1/1 -> Node 0 [ 22.769804] CPU: Physical Processor ID: 0 [ 22.769805] CPU: Processor Core ID: 1 [ 22.769891] AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 02 [ 22.769904] AMD C1E detected late. Force timer broadcast. [ 22.769562] Brought up 2 CPUs [ 22.769768] CPU0 attaching sched-domain: [ 22.769771] domain 0: span 03 [ 22.769773] groups: 01 02 [ 22.769776] domain 1: span 03 [ 22.769777] groups: 03 [ 22.769779] CPU1 attaching sched-domain: [ 22.769781] domain 0: span 03 [ 22.769783] groups: 02 01 [ 22.769785] domain 1: span 03 [ 22.769787] groups: 03 [ 22.770026] net_namespace: 120 bytes [ 22.770486] Time: 14:52:20 Date: 01/28/08 [ 22.770602] NET: Registered protocol family 16 [ 22.770853] ACPI: bus type pci registered [ 22.770985] PCI: Using configuration type 1 [ 22.772092] ACPI: EC: Look up EC in DSDT [ 22.774024] ACPI: System BIOS is requesting _OSI(Linux) [ 22.774087] ACPI: If "acpi_osi=Linux" works better, [ 22.774088] Please send dmidecode to linux-acpi@vger.kernel.org [ 22.774454] ACPI: Interpreter enabled [ 22.774515] ACPI: (supports S0 S3 S4 S5) [ 22.774772] ACPI: Using IOAPIC for interrupt routing [ 22.775875] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 22.782145] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 22.782203] ACPI: EC: driver started in interrupt mode [ 22.782358] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 22.783810] PCI: Transparent bridge - 0000:00:10.0 [ 22.783878] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 22.783985] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 22.784015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] [ 22.784051] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 22.784085] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 22.819778] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled. [ 22.820228] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 [ 22.820632] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *11 [ 22.821035] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 22.821478] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *11 [ 22.821881] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 22.822336] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. [ 22.822780] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled. [ 22.823223] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 22.823587] ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *10 [ 22.823991] ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11 [ 22.824394] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 22.824797] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10 [ 22.825200] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *0, disabled. [ 22.825646] ACPI: PCI Interrupt Link [LACI] (IRQs 21) *0, disabled. [ 22.826089] ACPI: PCI Interrupt Link [LMCI] (IRQs 21) *0, disabled. [ 22.826536] ACPI: PCI Interrupt Link [LPID] (IRQs 21) *0, disabled. [ 22.826986] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5 [ 22.827389] ACPI: PCI Interrupt Link [LSI1] (IRQs 20) *10 [ 22.827727] Linux Plug and Play Support v0.97 (c) Adam Belay [ 22.827807] pnp: PnP ACPI init [ 22.827865] ACPI: bus type pnp registered [ 22.831224] pnp: PnP ACPI: found 13 devices [ 22.831278] ACPI: ACPI bus type pnp unregistered [ 22.831606] PCI: Using ACPI for IRQ routing [ 22.831658] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 22.842649] NET: Registered protocol family 8 [ 22.842701] NET: Registered protocol family 20 [ 22.842855] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 22.843063] hpet0: 3 32-bit timers, 25000000 Hz [ 22.844169] AppArmor: AppArmor Filesystem Enabled [ 22.844238] ACPI: RTC can wake from S4 [ 22.846295] Time: hpet clocksource has been installed. [ 22.846351] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 22.846453] Could not switch to high resolution mode on CPU 0 [ 22.850626] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 22.850728] Could not switch to high resolution mode on CPU 1 [ 22.858675] system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved [ 22.858743] system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved [ 22.858806] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 22.858869] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved [ 22.858932] system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved [ 22.858992] system 00:03: iomem range 0xe0000000-0xefffffff could not be reserved [ 22.859057] system 00:04: ioport range 0x1000-0x107f has been reserved [ 22.859112] system 00:04: ioport range 0x1080-0x10ff has been reserved [ 22.859166] system 00:04: ioport range 0x1400-0x147f has been reserved [ 22.859221] system 00:04: ioport range 0x1480-0x14ff has been reserved [ 22.861141] system 00:04: ioport range 0x1800-0x187f has been reserved [ 22.861196] system 00:04: ioport range 0x1880-0x18ff has been reserved [ 22.861250] system 00:04: ioport range 0x2000-0x203f has been reserved [ 22.861308] system 00:05: ioport range 0x360-0x361 has been reserved [ 22.861362] system 00:05: ioport range 0x380-0x383 has been reserved [ 22.861416] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 22.861957] PCI: Bridge: 0000:00:02.0 [ 22.862008] IO window: 4000-4fff [ 22.862060] MEM window: c2000000-c3ffffff [ 22.862111] PREFETCH window: c8200000-c83fffff [ 22.862163] PCI: Bridge: 0000:00:03.0 [ 22.862213] IO window: disabled. [ 22.862264] MEM window: c4000000-c5ffffff [ 22.862315] PREFETCH window: disabled. [ 22.862369] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:05:00.0 [ 22.862431] PCI: Bridge: 0000:00:04.0 [ 22.862482] IO window: 5000-5fff [ 22.862533] MEM window: c6000000-c7ffffff [ 22.862584] PREFETCH window: d0000000-dfffffff [ 22.862641] PCI: Bridge: 0000:00:10.0 [ 22.862691] IO window: disabled. [ 22.862742] MEM window: c8000000-c80fffff [ 22.862794] PREFETCH window: disabled. [ 22.862855] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 22.862861] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 22.862868] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 22.862876] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 22.862931] NET: Registered protocol family 2 [ 22.906705] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 22.907257] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 22.908795] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 22.909542] TCP: Hash tables configured (established 131072 bind 65536) [ 22.909606] TCP reno registered [ 22.922749] checking if image is initramfs... it is [ 23.635996] Freeing initrd memory: 7590k freed [ 23.641352] Simple Boot Flag at 0x36 set to 0x1 [ 23.641938] audit: initializing netlink socket (disabled) [ 23.642010] audit(1201531940.468:1): initialized [ 23.644111] VFS: Disk quotas dquot_6.5.1 [ 23.644244] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 23.644432] io scheduler noop registered [ 23.644492] io scheduler anticipatory registered [ 23.644552] io scheduler deadline registered [ 23.644713] io scheduler cfq registered (default) [ 23.858112] Boot video device is 0000:05:00.0 [ 23.858284] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 23.858306] assign_interrupt_mode Found MSI capability [ 23.858378] Allocate Port Service[0000:00:02.0:pcie00] [ 23.858441] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 23.858463] assign_interrupt_mode Found MSI capability [ 23.858529] Allocate Port Service[0000:00:03.0:pcie00] [ 23.858585] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 23.858607] assign_interrupt_mode Found MSI capability [ 23.858672] Allocate Port Service[0000:00:04.0:pcie00] [ 23.886619] Real Time Clock Driver v1.12ac [ 23.886934] hpet_resources: 0xfed00000 is busy [ 23.886978] Linux agpgart interface v0.102 [ 23.887039] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 23.888189] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 23.888326] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 23.888490] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 23.906725] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 23.906790] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 23.917801] mice: PS/2 mouse device common for all mice [ 23.917898] cpuidle: using governor ladder [ 23.917958] cpuidle: using governor menu [ 23.918163] NET: Registered protocol family 1 [ 23.918278] registered taskstats version 1 [ 23.918492] Magic number: 8:895:890 [ 23.918633] hash matches device ptyy0 [ 23.918763] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 23.918842] Freeing unused kernel memory: 316k freed [ 23.962048] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 24.105371] fuse init (API version 7.9) [ 24.117177] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 24.117508] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 24.119919] ACPI: Thermal Zone [THRM] (33 C) [ 24.565346] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 24.565460] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK4E] -> GSI 19 (level, high) -> IRQ 19 [ 24.565633] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 24.617636] SCSI subsystem initialized [ 24.625425] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 24.645579] libata version 3.00 loaded. [ 24.680304] usbcore: registered new interface driver usbfs [ 24.680389] usbcore: registered new interface driver hub [ 24.681235] usbcore: registered new device driver usb [ 24.682114] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 24.682144] PCI: Enabling device 0000:00:0e.0 (0005 -> 0007) [ 24.682567] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23 [ 24.682638] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 23 (level, high) -> IRQ 23 [ 24.682821] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 24.682829] ACPI: PCI interrupt for device 0000:00:0e.0 disabled [ 24.683205] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 20 [ 24.683273] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LSI1] -> GSI 20 (level, high) -> IRQ 20 [ 24.683455] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 24.683463] ACPI: PCI interrupt for device 0000:00:0f.0 disabled [ 24.685767] pata_amd 0000:00:0d.0: version 0.3.10 [ 24.685813] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 24.687544] scsi0 : pata_amd [ 24.688923] scsi1 : pata_amd [ 24.689559] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14 [ 24.689622] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15 [ 24.693244] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 25.013643] ata1.00: ATAPI: MATSHITADVD-RAM UJ-851S, 1.50, max MWDMA2 [ 25.185490] ata1.00: configured for MWDMA2 [ 25.185951] ata2: port disabled. ignoring. [ 25.187853] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-851S 1.50 PQ: 0 ANSI: 5 [ 25.188082] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 25.188154] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 22 (level, high) -> IRQ 22 [ 25.188486] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 25.188493] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 25.188788] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 25.188897] ehci_hcd 0000:00:0b.1: debug port 1 [ 25.188961] PCI: cache line size of 64 is not supported by device 0000:00:0b.1 [ 25.188973] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xc0005000 [ 25.193718] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 25.193789] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 25.201039] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 25.201234] usb usb1: configuration #1 chosen from 1 choice [ 25.201311] hub 1-0:1.0: USB hub found [ 25.201367] hub 1-0:1.0: 8 ports detected [ 25.305974] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 [ 25.306042] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 22 (level, high) -> IRQ 22 [ 25.306390] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 25.306398] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 25.306513] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 25.306600] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xc0004000 [ 25.367423] usb usb2: configuration #1 chosen from 1 choice [ 25.367513] hub 2-0:1.0: USB hub found [ 25.367582] hub 2-0:1.0: 8 ports detected [ 25.473491] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 25.473923] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 25.473986] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 20 (level, high) -> IRQ 20 [ 25.474157] PCI: Setting latency timer of device 0000:00:14.0 to 64 [ 25.829046] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 25.982386] usb 1-4: configuration #1 chosen from 1 choice [ 26.001660] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:0c:ed:92 [ 26.001738] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3 [ 26.001861] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 26.001939] ACPI: PCI Interrupt 0000:07:05.0[A] -> Link [LNK1] -> GSI 5 (level, high) -> IRQ 5 [ 26.054289] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[c8000000-c80007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 26.058947] sata_nv 0000:00:0e.0: version 3.5 [ 26.058965] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 23 (level, high) -> IRQ 23 [ 26.059378] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 26.060862] scsi2 : sata_nv [ 26.061567] scsi3 : sata_nv [ 26.061813] ata3: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 23 [ 26.061877] ata4: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 23 [ 26.068154] Driver 'sr' needs updating - please use bus_type methods [ 26.074729] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 26.074802] Uniform CD-ROM driver Revision: 3.20 [ 26.074903] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 26.081032] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 26.296793] usb 2-3: new full speed USB device using ohci_hcd and address 2 [ 26.536683] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 26.542810] usb 2-3: configuration #1 chosen from 1 choice [ 26.544850] ata3.00: ATA-7: ST9120821AS, 7.24, max UDMA/100 [ 26.544907] ata3.00: 234441648 sectors, multi 16: LBA48 [ 26.564852] ata3.00: configured for UDMA/100 [ 26.884479] ata4: SATA link down (SStatus 0 SControl 300) [ 26.895583] scsi 2:0:0:0: Direct-Access ATA ST9120821AS 7.24 PQ: 0 ANSI: 5 [ 26.895727] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 26.895819] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LSI1] -> GSI 20 (level, high) -> IRQ 20 [ 26.896194] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 26.896259] scsi4 : sata_nv [ 26.896385] scsi5 : sata_nv [ 26.896603] ata5: SATA max UDMA/133 cmd 0x30d8 ctl 0x30cc bmdma 0x30a0 irq 20 [ 26.896669] ata6: SATA max UDMA/133 cmd 0x30d0 ctl 0x30c8 bmdma 0x30a8 irq 20 [ 27.348317] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b003e000800] [ 27.363896] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 27.372146] ata5.00: ATA-7: ST9120821AS, 7.24, max UDMA/100 [ 27.372209] ata5.00: 234441648 sectors, multi 16: LBA48 [ 27.388136] ata5.00: configured for UDMA/100 [ 27.699697] ata6: SATA link down (SStatus 0 SControl 300) [ 27.712760] scsi 4:0:0:0: Direct-Access ATA ST9120821AS 7.24 PQ: 0 ANSI: 5 [ 27.712909] scsi 4:0:0:0: Attached scsi generic sg2 type 0 [ 27.720428] Driver 'sd' needs updating - please use bus_type methods [ 27.720578] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 27.720653] sd 2:0:0:0: [sda] Write Protect is off [ 27.720715] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 27.720732] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.720854] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 27.720925] sd 2:0:0:0: [sda] Write Protect is off [ 27.720986] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 27.721001] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.721075] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 27.766107] sd 2:0:0:0: [sda] Attached SCSI disk [ 27.767194] sd 4:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB) [ 27.767260] sd 4:0:0:0: [sdb] Write Protect is off [ 27.767312] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 27.767330] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.767433] sd 4:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB) [ 27.767495] sd 4:0:0:0: [sdb] Write Protect is off [ 27.767547] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 27.767563] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.767628] sdb: sdb1 sdb2 sdb3 [ 27.778735] sd 4:0:0:0: [sdb] Attached SCSI disk [ 28.189467] Attempting manual resume [ 28.189529] swsusp: Resume From Partition 8:6 [ 28.189531] PM: Checking swsusp image. [ 28.189777] PM: Resume from disk failed. [ 28.230562] kjournald starting. Commit interval 5 seconds [ 28.230910] EXT3-fs: mounted filesystem with ordered data mode. [ 37.316910] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 38.030546] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 38.059378] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 38.286481] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 [ 38.286564] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 [ 38.347306] sdhci: Secure Digital Host Controller Interface driver [ 38.347373] sdhci: Copyright(c) Pierre Ossman [ 38.347485] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19) [ 38.347902] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 38.347974] ACPI: PCI Interrupt 0000:07:05.1[B] -> Link [LNK2] -> GSI 7 (level, high) -> IRQ 7 [ 38.348403] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 38.348566] mmc0: SDHCI at 0xc8000800 irq 7 DMA [ 38.399176] ricoh-mmc: Ricoh MMC Controller disabling driver [ 38.399242] ricoh-mmc: Copyright(c) Philip Langdale [ 38.413355] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1) [ 38.413440] ricoh-mmc: Controller is now disabled. [ 38.447231] ACPI: AC Adapter [ACAD] (off-line) [ 38.513984] input: Power Button (FF) as /devices/virtual/input/input3 [ 38.561811] ACPI: Power Button (FF) [PWRF] [ 38.561937] input: Power Button (CM) as /devices/virtual/input/input4 [ 38.625774] ACPI: Power Button (CM) [PWRB] [ 38.625902] input: Sleep Button (CM) as /devices/virtual/input/input5 [ 38.689756] ACPI: Sleep Button (CM) [SLPB] [ 38.689898] input: Lid Switch as /devices/virtual/input/input6 [ 38.722541] ACPI: Lid Switch [LID] [ 39.010116] ACPI: Battery Slot [BAT0] (battery present) [ 39.267630] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input7 [ 39.293801] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 39.295807] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:26/LNXVIDEO:01/input/input8 [ 39.322490] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 39.357746] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 39.383813] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 39.534082] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 39.534151] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 21 (level, high) -> IRQ 21 [ 39.534500] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 39.789496] Bluetooth: Core ver 2.11 [ 39.790020] NET: Registered protocol family 31 [ 39.790087] Bluetooth: HCI device and connection manager initialized [ 39.790152] Bluetooth: HCI socket layer initialized [ 39.870618] Bluetooth: HCI USB driver ver 2.9 [ 39.872992] usbcore: registered new interface driver hci_usb [ 39.901545] b43-phy0: Broadcom 4311 WLAN found [ 39.906613] Linux video capture interface: v2.00 [ 39.950261] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0) [ 39.951388] usbcore: registered new interface driver uvcvideo [ 39.951446] USB Video Class driver (v0.1.0) [ 39.982048] phy0: Selected rate control algorithm 'simple' [ 41.065551] udev: renamed network interface wmaster0 to eth1 [ 73.954766] loop: module loaded [ 74.003175] lp: driver loaded but no devices found [ 74.172573] ndiswrapper version 1.51 loaded (smp=yes, preempt=no) [ 74.175243] usbcore: registered new interface driver ndiswrapper [ 74.252094] Adding 2048184k swap on /dev/sda6. Priority:-1 extents:1 across:2048184k [ 74.271779] EXT3 FS on sda8, internal journal [ 74.583596] kjournald starting. Commit interval 5 seconds [ 74.584131] EXT3 FS on sda7, internal journal [ 74.584138] EXT3-fs: mounted filesystem with ordered data mode. [ 74.627611] kjournald starting. Commit interval 5 seconds [ 74.628107] EXT3 FS on sda1, internal journal [ 74.628111] EXT3-fs: mounted filesystem with ordered data mode. [ 76.961463] No dock devices found. [ 77.018067] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 77.224703] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-56 processors (2 cpu cores) (version 2.20.00) [ 77.224423] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x13 [ 77.224428] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x15 [ 77.224431] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1e [ 80.440972] input: b43-phy0 as /devices/virtual/input/input10 [ 80.613007] NET: Registered protocol family 10 [ 81.660409] Registered led device: b43-phy0:tx [ 81.660435] Registered led device: b43-phy0:rx [ 81.660454] Registered led device: b43-phy0:radio [ 81.675562] lo: Disabled Privacy Extensions [ 81.676607] ADDRCONF(NETDEV_UP): wlan0_rename: link is not ready [ 82.110393] ppdev: user-space parallel port driver [ 82.424198] audit(1201528400.067:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5880 profile="/usr/sbin/cupsd" namespace="default" [ 84.672790] Clocksource tsc unstable (delta = -180022798 ns) [ 86.931712] Bluetooth: L2CAP ver 2.9 [ 86.931718] Bluetooth: L2CAP socket layer initialized [ 86.938675] Bluetooth: RFCOMM socket layer initialized [ 86.938696] Bluetooth: RFCOMM TTY layer initialized [ 86.938698] Bluetooth: RFCOMM ver 1.8 [ 87.186778] NET: Registered protocol family 17 [ 99.580876] eth0: no IPv6 routers present [ 102.691039] CPU0 attaching NULL sched-domain. [ 102.691047] CPU1 attaching NULL sched-domain. [ 102.705894] CPU0 attaching sched-domain: [ 102.705898] domain 0: span 03 [ 102.705900] groups: 01 02 [ 102.705904] domain 1: span 03 [ 102.705905] groups: 03 [ 102.705908] CPU1 attaching sched-domain: [ 102.705909] domain 0: span 03 [ 102.705911] groups: 02 01 [ 102.705914] domain 1: span 03 [ 102.705916] groups: 03 [ 324.906120] usb 1-7: new high speed USB device using ehci_hcd and address 4 [ 324.973203] usb 1-7: configuration #1 chosen from 1 choice [ 325.124166] usbcore: registered new interface driver libusual [ 325.278825] Initializing USB Mass Storage driver... [ 325.279142] scsi6 : SCSI emulation for USB Mass Storage devices [ 325.279306] usbcore: registered new interface driver usb-storage [ 325.279310] USB Mass Storage support registered. [ 325.279586] usb-storage: device found at 4 [ 325.279588] usb-storage: waiting for device to settle before scanning [ 328.275413] usb-storage: device scan complete [ 328.276873] scsi 6:0:0:0: Direct-Access Intuix DiskOnKey 6.51 PQ: 0 ANSI: 0 CCS [ 328.281079] sd 6:0:0:0: [sdc] 3903487 512-byte hardware sectors (1999 MB) [ 328.282741] sd 6:0:0:0: [sdc] Write Protect is off [ 328.282745] sd 6:0:0:0: [sdc] Mode Sense: 45 00 00 08 [ 328.282747] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 328.286410] sd 6:0:0:0: [sdc] 3903487 512-byte hardware sectors (1999 MB) [ 328.287412] sd 6:0:0:0: [sdc] Write Protect is off [ 328.287418] sd 6:0:0:0: [sdc] Mode Sense: 45 00 00 08 [ 328.287420] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 328.287425] sdc: sdc1 [ 328.289218] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 328.289270] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 329.595337] gnome-mount[8057] general protection rip:7f7be7e39a10 rsp:7ffff19cdd60 error:0 [ 329.606453] gnome-mount[8061] general protection rip:7f719fa56a10 rsp:7fffa95eaeb0 error:0 [ 407.563049] usb 1-7: USB disconnect, address 4