[ 0.000000] Linux version 2.6.22-14-386 (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 Sun Oct 14 22:36:54 GMT 2007 (Ubuntu 2.6.22-14.46-386) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f3e70 [ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262128 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262128 [ 0.000000] On node 0 totalpages: 262128 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32497 pages, LIFO batch:7 [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7E00 checksum 0 [ 0.000000] ACPI: RSDP 000F7E00, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 3FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3FFF3180, 6422 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FFF0000, 0040 [ 0.000000] ACPI: SSDT 3FFF96C0, 00D3 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: MCFG 3FFF9800, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 3FFF9600, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:15 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Built 1 zonelists. Total pages: 260081 [ 0.000000] Kernel command line: root=UUID=08c6d9fa-6ef4-414c-9009-99711dae5239 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1800.022 MHz processor. [ 37.041413] spurious 8259A interrupt: IRQ7. [ 37.043403] Console: colour VGA+ 80x25 [ 37.043800] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 37.044452] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 37.063797] Memory: 1028400k/1048512k available (1929k kernel code, 19328k reserved, 877k data, 348k init, 131008k highmem) [ 37.063808] virtual kernel memory layout: [ 37.063809] fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB) [ 37.063810] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 37.063811] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 37.063813] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 37.063814] .init : 0xc03c0000 - 0xc0417000 ( 348 kB) [ 37.063815] .data : 0xc02e25d5 - 0xc03bda04 ( 877 kB) [ 37.063816] .text : 0xc0100000 - 0xc02e25d5 (1929 kB) [ 37.063819] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 37.063865] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 37.143761] Calibrating delay using timer specific routine.. 3602.27 BogoMIPS (lpj=7204546) [ 37.143784] Security Framework v1.0.0 initialized [ 37.143791] SELinux: Disabled at boot. [ 37.143797] Mount-cache hash table entries: 512 [ 37.143884] CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 00000019 [ 37.143891] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 37.143893] CPU: L2 Cache: 128K (64 bytes/line) [ 37.143896] CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 00000019 [ 37.143904] Compat vDSO mapped to ffffe000. [ 37.143913] CPU: AMD Sempron(tm) Processor 3200+ stepping 02 [ 37.143917] Checking 'hlt' instruction... OK. [ 37.160223] Early unpacking initramfs... done [ 37.464886] ACPI: Core revision 20070126 [ 37.464954] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 37.478365] ENABLING IO-APIC IRQs [ 37.478549] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 37.623114] Booting paravirtualized kernel on bare hardware [ 37.623154] Time: 15:01:27 Date: 10/01/107 [ 37.623175] NET: Registered protocol family 16 [ 37.623248] EISA bus registered [ 37.623256] ACPI: bus type pci registered [ 37.627839] PCI: PCI BIOS revision 3.00 entry at 0xfa920, last bus=5 [ 37.627841] PCI: Using configuration type 1 [ 37.627843] Setting up standard PCI resources [ 37.632585] ACPI: EC: Look up EC in DSDT [ 37.639011] ACPI: Interpreter enabled [ 37.639014] ACPI: (supports S0 S3 S4 S5) [ 37.639027] ACPI: Using IOAPIC for interrupt routing [ 37.647941] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 37.647947] PCI: Probing PCI hardware (bus 00) [ 37.648315] PCI: Transparent bridge - 0000:00:09.0 [ 37.648549] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 37.648879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 37.719107] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 10 11) *0, disabled. [ 37.719315] ACPI: PCI Interrupt Link [LNK2] (IRQs *5 10 11) [ 37.719517] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 10 11) [ 37.719717] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 10 11) *0, disabled. [ 37.719917] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 10 11) *0, disabled. [ 37.720118] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *10 11) [ 37.720317] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 10 11) *0, disabled. [ 37.720518] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 *10 11) [ 37.720719] ACPI: PCI Interrupt Link [LACI] (IRQs 5 10 *11) [ 37.720919] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 10 11) *0, disabled. [ 37.721120] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 10 11) [ 37.721326] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 10 *11) [ 37.721526] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 10 11) *0, disabled. [ 37.721735] ACPI: PCI Interrupt Link [LSID] (IRQs 5 10 *11) [ 37.721946] ACPI: PCI Interrupt Link [LFID] (IRQs 5 *10 11) [ 37.722156] ACPI: PCI Interrupt Link [LPCA] (IRQs 5 10 11) *0, disabled. [ 37.722376] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 37.722589] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 37.722802] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 37.723018] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 37.723164] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 37.723386] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 37.723605] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 37.723823] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 37.724040] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 37.724257] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 37.724475] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 37.724693] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 37.724910] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 37.725136] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 37.725361] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 37.725587] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 37.725712] Linux Plug and Play Support v0.97 (c) Adam Belay [ 37.725721] pnp: PnP ACPI init [ 37.725732] ACPI: bus type pnp registered [ 37.730462] pnp: PnP ACPI: found 10 devices [ 37.730465] ACPI: ACPI bus type pnp unregistered [ 37.730469] PnPBIOS: Disabled by ACPI PNP [ 37.730508] PCI: Using ACPI for IRQ routing [ 37.730512] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 37.790259] NET: Registered protocol family 8 [ 37.790261] NET: Registered protocol family 20 [ 37.790311] pnp: 00:01: ioport range 0x1000-0x107f has been reserved [ 37.790314] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved [ 37.790317] pnp: 00:01: ioport range 0x1400-0x147f has been reserved [ 37.790320] pnp: 00:01: ioport range 0x1480-0x14ff has been reserved [ 37.790323] pnp: 00:01: ioport range 0x1800-0x187f has been reserved [ 37.790326] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved [ 37.790336] pnp: 00:08: iomem range 0xe0000000-0xefffffff could not be reserved [ 37.790341] pnp: 00:09: iomem range 0xd0000-0xd3fff has been reserved [ 37.790344] pnp: 00:09: iomem range 0xf0000-0xf7fff could not be reserved [ 37.790347] pnp: 00:09: iomem range 0xf8000-0xfbfff could not be reserved [ 37.790350] pnp: 00:09: iomem range 0xfc000-0xfffff could not be reserved [ 37.790801] Time: tsc clocksource has been installed. [ 37.820512] PCI: Bridge: 0000:00:09.0 [ 37.820515] IO window: a000-afff [ 37.820518] MEM window: fde00000-fdefffff [ 37.820521] PREFETCH window: fdf00000-fdffffff [ 37.820524] PCI: Bridge: 0000:00:0b.0 [ 37.820526] IO window: 9000-9fff [ 37.820528] MEM window: fdd00000-fddfffff [ 37.820531] PREFETCH window: fdc00000-fdcfffff [ 37.820533] PCI: Bridge: 0000:00:0c.0 [ 37.820535] IO window: 8000-8fff [ 37.820538] MEM window: fdb00000-fdbfffff [ 37.820541] PREFETCH window: fda00000-fdafffff [ 37.820543] PCI: Bridge: 0000:00:0d.0 [ 37.820545] IO window: 7000-7fff [ 37.820548] MEM window: fd900000-fd9fffff [ 37.820550] PREFETCH window: fd800000-fd8fffff [ 37.820555] PCI: Bridge: 0000:00:0e.0 [ 37.820557] IO window: 6000-6fff [ 37.820560] MEM window: fa000000-fcffffff [ 37.820562] PREFETCH window: d0000000-dfffffff [ 37.820569] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 37.820577] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 37.820583] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 37.820588] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 37.820594] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 37.820606] NET: Registered protocol family 2 [ 37.858717] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 37.858814] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 37.859692] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 37.859931] TCP: Hash tables configured (established 131072 bind 65536) [ 37.859934] TCP reno registered [ 37.870793] checking if image is initramfs... it is [ 38.322014] Switched to high resolution mode on CPU 0 [ 38.468260] Freeing initrd memory: 6773k freed [ 38.468528] audit: initializing netlink socket (disabled) [ 38.468539] audit(1193929287.296:1): initialized [ 38.468580] highmem bounce pool size: 64 pages [ 38.469883] VFS: Disk quotas dquot_6.5.1 [ 38.469894] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 38.469967] io scheduler noop registered [ 38.469969] io scheduler anticipatory registered [ 38.469971] io scheduler deadline registered [ 38.469984] io scheduler cfq registered (default) [ 38.485665] PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 [ 38.485672] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 38.485678] PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 [ 38.485684] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 38.485690] PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 [ 38.485696] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 38.485701] PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 [ 38.485708] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 38.485715] Boot video device is 0000:05:00.0 [ 38.485779] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 38.485797] assign_interrupt_mode Found MSI capability [ 38.485799] Allocate Port Service[0000:00:0b.0:pcie00] [ 38.485846] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 38.485863] assign_interrupt_mode Found MSI capability [ 38.485865] Allocate Port Service[0000:00:0c.0:pcie00] [ 38.485907] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 38.485923] assign_interrupt_mode Found MSI capability [ 38.485925] Allocate Port Service[0000:00:0d.0:pcie00] [ 38.485967] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 38.485983] assign_interrupt_mode Found MSI capability [ 38.485985] Allocate Port Service[0000:00:0e.0:pcie00] [ 38.486071] isapnp: Scanning for PnP cards... [ 38.838147] isapnp: No Plug & Play device found [ 38.865828] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 38.866895] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 38.867044] input: Macintosh mouse button emulation as /class/input/input0 [ 38.867124] PNP: No PS/2 controller found. Probing ports directly. [ 38.869727] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 38.869732] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 38.869864] mice: PS/2 mouse device common for all mice [ 38.869941] EISA: Probing bus 0 at eisa.0 [ 38.869947] Cannot allocate resource for EISA slot 1 [ 38.869958] Cannot allocate resource for EISA slot 6 [ 38.869960] Cannot allocate resource for EISA slot 7 [ 38.869962] Cannot allocate resource for EISA slot 8 [ 38.869964] EISA: Detected 0 cards. [ 38.870042] TCP cubic registered [ 38.870052] NET: Registered protocol family 1 [ 38.870071] Using IPI Shortcut mode [ 38.870227] Magic number: 15:655:31 [ 38.870236] hash matches device ttyde [ 38.870583] Freeing unused kernel memory: 348k freed [ 40.123553] fuse init (API version 7.8) [ 40.129135] Capability LSM initialized [ 40.132932] ACPI: Fan [FAN] (on) [ 40.139055] ACPI: Thermal Zone [THRM] (5 C) [ 40.763091] usbcore: registered new interface driver usbfs [ 40.763111] usbcore: registered new interface driver hub [ 40.763127] usbcore: registered new device driver usb [ 40.764363] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 [ 40.764373] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 16 [ 40.764384] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 40.764387] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 40.764543] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 40.764571] ehci_hcd 0000:00:02.1: debug port 1 [ 40.764575] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 40.764584] ehci_hcd 0000:00:02.1: irq 16, io mem 0xfe02e000 [ 40.764590] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 40.764681] usb usb1: configuration #1 chosen from 1 choice [ 40.764702] hub 1-0:1.0: USB hub found [ 40.764709] hub 1-0:1.0: 10 ports detected [ 40.776033] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 40.784972] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 40.784978] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 40.798190] SCSI subsystem initialized [ 40.802568] libata version 2.21 loaded. [ 40.880964] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 40.881369] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 40.881378] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 17 [ 40.881384] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 40.881392] forcedeth: using HIGHDMA [ 41.039734] Floppy drive(s): fd0 is 1.44M [ 41.078839] FDC 0 is a post-1991 82077 [ 41.105477] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 41.238560] usb 1-4: configuration #1 chosen from 1 choice [ 41.238770] hub 1-4:1.0: USB hub found [ 41.239118] hub 1-4:1.0: 4 ports detected [ 41.397206] eth0: forcedeth.c: subsystem: 0147b:1c28 bound to 0000:00:0a.0 [ 41.397687] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 41.397698] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 18 [ 41.397710] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 41.397713] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 41.397743] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 41.397758] ohci_hcd 0000:00:02.0: irq 18, io mem 0xfe02f000 [ 41.454948] usb usb2: configuration #1 chosen from 1 choice [ 41.454972] hub 2-0:1.0: USB hub found [ 41.454981] hub 2-0:1.0: 10 ports detected [ 41.541011] usb 1-4.1: new low speed USB device using ehci_hcd and address 3 [ 41.556893] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 [ 41.556911] NFORCE-CK804: chipset revision 243 [ 41.556913] NFORCE-CK804: not 100% native mode: will probe irqs later [ 41.556917] NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. [ 41.556921] NFORCE-CK804: 0000:00:06.0 (rev f3) UDMA133 controller [ 41.556928] ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA [ 41.556937] ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA [ 41.556944] Probing IDE interface ide0... [ 41.664618] usb 1-4.1: configuration #1 chosen from 1 choice [ 41.844322] hda: IBM-DTTA-351010, ATA DISK drive [ 41.864506] usb 1-4.2: new low speed USB device using ehci_hcd and address 4 [ 41.958813] usb 1-4.2: configuration #1 chosen from 1 choice [ 41.960903] usbcore: registered new interface driver hiddev [ 41.971135] input: Logitech HID compliant keyboard as /class/input/input1 [ 41.971157] input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:02.1-4.1 [ 41.989386] input: Logitech HID compliant keyboard as /class/input/input2 [ 41.989405] input: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:02.1-4.1 [ 41.991949] input: HID 04b3:3105 as /class/input/input3 [ 41.991969] input: USB HID v1.00 Mouse [HID 04b3:3105] on usb-0000:00:02.1-4.2 [ 41.991983] usbcore: registered new interface driver usbhid [ 41.991987] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 42.515914] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 42.525362] Probing IDE interface ide1... [ 42.810770] hdc: IBM-DTLA-307045, ATA DISK drive [ 43.090315] hdd: SAMSUNG SV1204H, ATA DISK drive [ 43.146628] ide1 at 0x170-0x177,0x376 on irq 15 [ 43.154343] sata_nv 0000:00:07.0: version 3.4 [ 43.154793] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 43.154802] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 19 [ 43.154807] sata_nv 0000:00:07.0: Using ADMA mode [ 43.154845] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 43.154949] scsi0 : sata_nv [ 43.155213] scsi1 : sata_nv [ 43.155409] ata1: SATA max UDMA/133 cmd 0xf8862480 ctl 0xf88624a0 bmdma 0x0001d400 irq 19 [ 43.155414] ata2: SATA max UDMA/133 cmd 0xf8862580 ctl 0xf88625a0 bmdma 0x0001d408 irq 19 [ 43.161497] hda: max request size: 128KiB [ 43.170614] hda: 19807200 sectors (10141 MB) w/466KiB Cache, CHS=19650/16/63, UDMA(33) [ 43.170622] hda: cache flushes not supported [ 43.170658] hda: hda1 [ 43.183521] hdc: max request size: 128KiB [ 43.213763] hdc: 90069840 sectors (46115 MB) w/1916KiB Cache, CHS=65535/16/63, UDMA(100) [ 43.213770] hdc: cache flushes not supported [ 43.213805] hdc: hdc1 hdc2 [ 43.229544] hdd: max request size: 128KiB [ 43.229614] hdd: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) [ 43.229673] hdd: cache flushes supported [ 43.229694] hdd: hdd1 [ 43.621396] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 43.675077] ata1.00: ATA-7: ST3250620AS, 3.AAK, max UDMA/133 [ 43.675081] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 43.741614] ata1.00: configured for UDMA/133 [ 44.208450] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 44.372264] ata2.00: ATAPI: TSSTcorpDVD-ROM SH-D163A, SB01, max UDMA/33 [ 44.543990] ata2.00: configured for UDMA/33 [ 44.544093] scsi 0:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5 [ 44.544101] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 44.545001] scsi 1:0:0:0: CD-ROM TSSTcorp DVD-ROM SH-D163A SB01 PQ: 0 ANSI: 5 [ 44.545010] ata2: bounce limit 0xFFFFFFFF, segment boundary 0xFFFF, hw segs 127 [ 44.545742] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 44.545747] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 16 [ 44.545752] sata_nv 0000:00:08.0: Using ADMA mode [ 44.545789] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 44.545868] scsi2 : sata_nv [ 44.546133] scsi3 : sata_nv [ 44.546331] ata3: SATA max UDMA/133 cmd 0xf8866480 ctl 0xf88664a0 bmdma 0x0001c000 irq 16 [ 44.546335] ata4: SATA max UDMA/133 cmd 0xf8866580 ctl 0xf88665a0 bmdma 0x0001c008 irq 16 [ 44.855401] ata3: SATA link down (SStatus 0 SControl 300) [ 45.166900] ata4: SATA link down (SStatus 0 SControl 300) [ 45.168332] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 45.168342] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 20 [ 45.168349] PCI: Setting latency timer of device 0000:01:09.0 to 64 [ 45.219399] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 45.243844] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 45.244909] sd 0:0:0:0: [sda] Write Protect is off [ 45.244914] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 45.244964] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 45.245015] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 45.245022] sd 0:0:0:0: [sda] Write Protect is off [ 45.245025] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 45.245034] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 45.245039] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 45.300432] sd 0:0:0:0: [sda] Attached SCSI disk [ 45.304289] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 45.304305] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 45.333276] sr0: scsi3-mmc drive: 16x/48x cd/rw xa/form2 cdda tray [ 45.333282] Uniform CD-ROM driver Revision: 3.20 [ 45.333521] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 45.601969] kjournald starting. Commit interval 5 seconds [ 45.601979] EXT3-fs: mounted filesystem with ordered data mode. [ 46.492859] ieee1394: Host added: ID:BUS[0-00:1023] GUID[080028560000001f] [ 53.419923] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 53.419950] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40 [ 54.038335] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 54.047589] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 54.398124] usbcore: registered new interface driver xpad [ 54.398129] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6 [ 54.757731] Linux agpgart interface v0.102 (c) Dave Jones [ 54.863553] Real Time Clock Driver v1.12ac [ 54.867859] input: PC Speaker as /class/input/input4 [ 54.982664] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 54.982669] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 17 [ 54.982690] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 55.007799] nvidia: module license 'NVIDIA' taints kernel. [ 55.322555] intel8x0_measure_ac97_clock: measured 54425 usecs [ 55.322560] intel8x0: clocking to 46929 [ 55.418063] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 55.418075] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 21 [ 55.418083] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 55.418306] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007 [ 56.515673] lp: driver loaded but no devices found [ 56.988560] EXT3 FS on sda3, internal journal [ 59.775719] kjournald starting. Commit interval 5 seconds [ 59.775728] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 59.776011] EXT3 FS on sda2, internal journal [ 59.776016] EXT3-fs: mounted filesystem with ordered data mode. [ 59.800339] kjournald starting. Commit interval 5 seconds [ 59.800593] EXT3 FS on sda5, internal journal [ 59.800597] EXT3-fs: mounted filesystem with ordered data mode. [ 59.824694] kjournald starting. Commit interval 5 seconds [ 59.824939] EXT3 FS on sda7, internal journal [ 59.824943] EXT3-fs: mounted filesystem with ordered data mode. [ 59.848169] kjournald starting. Commit interval 5 seconds [ 59.848417] EXT3 FS on sda8, internal journal [ 59.848421] EXT3-fs: mounted filesystem with ordered data mode. [ 63.360870] powernow-k8: Found 1 AMD Sempron(tm) Processor 3200+ processors (version 2.00.00) [ 63.360904] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xc [ 63.360906] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 [ 63.427632] No dock devices found. [ 63.611407] input: Power Button (FF) as /class/input/input5 [ 63.615477] ACPI: Power Button (FF) [PWRF] [ 63.649633] input: Power Button (CM) as /class/input/input6 [ 63.653651] ACPI: Power Button (CM) [PWRB] [ 65.121882] ppdev: user-space parallel port driver [ 65.590334] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 65.590339] apm: overridden by ACPI. [ 29.416000] Marking TSC unstable due to: cpufreq changes. [ 29.420000] Time: acpi_pm clocksource has been installed. [ 29.652000] Clocksource tsc unstable (delta = -106318333 ns) [ 32.004000] Capability LSM initialized [ 32.136000] Bluetooth: Core ver 2.11 [ 32.136000] NET: Registered protocol family 31 [ 32.136000] Bluetooth: HCI device and connection manager initialized [ 32.136000] Bluetooth: HCI socket layer initialized [ 32.156000] Bluetooth: L2CAP ver 2.8 [ 32.156000] Bluetooth: L2CAP socket layer initialized [ 32.204000] Bluetooth: RFCOMM socket layer initialized [ 32.204000] Bluetooth: RFCOMM TTY layer initialized [ 32.204000] Bluetooth: RFCOMM ver 1.8 [ 37.492000] NET: Registered protocol family 17 [ 42.748000] NET: Registered protocol family 10 [ 42.748000] lo: Disabled Privacy Extensions [ 53.576000] eth2: no IPv6 routers present