Kernel hang during boot, around IDE detection time
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux-source-2.6.22 (Ubuntu) |
New
|
Undecided
|
Unassigned |
Bug Description
Binary package hint: kernel-
After upgrading to 7.10, the kernel hangs right after detecting my IDE devices. The last message printed on the console before hanging is the Uniform CD Driver loading.
Choosing my previous kernel from 7.04, the system boots fine.
I use the following extra parameters to the kernel: root=/dev/md0 noapic noacpi (the last 2 are due to a buggy NIC driver in the previous Ubuntu release)
I saw some other reports about similar issue, but were related to Intel chipsets, which I don't use.
My hardware is:
Biostar TForce 4u (nForce 4 Ultra based mobo)
Athlon 64 3500+ (still using 32-bit Ubuntu though)
2GB RAM
SAMSUNG SP0411N 40GB HD (IDE Primary Master)
Seagate ST3120814A 120GB HD (IDE Primary Slave)
An ASUS DVD-ROM drive (IDE Secondary Master)
Here is lspci:
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01)
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200] (Secondary) (rev 01)
01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/
01:08.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
01:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
I know superficially my bug report looks a lot like 144030, however there are a couple of differences:
I never get kernel panic/oops/etc., just a hang.
I tried the fixes in that bug report (renaming acpi folder, etc.), none work.
It always hangs at exactly the same spot, right after it prints out that the CD driver is loading.