Binary package hint: linux-image-2.6.22-14-generic After upgrading from feisty to gutsy I noticed that ksoftirqd on CPU 0 is always using about 30% of of that CPU even when the system is otherwise idle. I have upgraded the 2.6.22 kernel about 3 times over the past 2 weeks and it has always had the same results. I don't remember seeing this with 2.6.20 (with feisty) I have a MSI P6N SLI Platinum (NF650ISLI) motherboard with an Intel Penduam Duo E2160. I just patched to the latest kernel (2.6.22-14-generic) and it has been up for 91min and the ksofirqd/0 process has already used 28min of CPU time. mythtv@corellia:~$ top top - 19:55:45 up 1:31, 2 users, load average: 0.73, 0.71, 0.65 Tasks: 113 total, 1 running, 112 sleeping, 0 stopped, 0 zombie Cpu(s): 0.1%us, 14.3%sy, 0.0%ni, 83.8%id, 0.2%wa, 0.1%hi, 1.5%si, 0.0%st Mem: 1035376k total, 491236k used, 544140k free, 14164k buffers Swap: 1959920k total, 0k used, 1959920k free, 359808k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 4 root 34 19 0 0 0 S 36 0.0 28:55.04 ksoftirqd/0 1 root 18 0 2952 1852 532 S 0 0.2 0:01.33 init 2 root 11 -5 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT -5 0 0 0 S 0 0.0 0:00.00 migration/0 5 root RT -5 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT -5 0 0 0 S 0 0.0 0:00.00 migration/1 7 root 34 19 0 0 0 S 0 0.0 0:00.00 ksoftirqd/1 8 root RT -5 0 0 0 S 0 0.0 0:00.00 watchdog/1 9 root 10 -5 0 0 0 S 0 0.0 0:00.00 events/0 I don't know if these numbers are high but here are some dumps of /proc/interrupts mythtv@corellia:~$ uptime ; cat /proc/interrupts 18:30:17 up 6 min, 1 user, load average: 0.84, 0.68, 0.34 CPU0 CPU1 0: 167 0 IO-APIC-edge timer 1: 10 0 IO-APIC-edge i8042 7: 1 0 IO-APIC-edge parport0 8: 43 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-fasteoi acpi 12: 113 0 IO-APIC-edge i8042 16: 21233 0 IO-APIC-fasteoi sata_sil24, nvidia 17: 36265 0 IO-APIC-fasteoi ohci_hcd:usb2, eth0 18: 6559 0 IO-APIC-fasteoi sata_nv, HDA Intel 19: 0 0 IO-APIC-fasteoi sata_nv 20: 10203 0 IO-APIC-fasteoi ehci_hcd:usb1 21: 2 0 IO-APIC-fasteoi ohci1394 22: 0 0 IO-APIC-fasteoi cx88[0], cx88[0] 23: 0 0 IO-APIC-fasteoi ivtv0 NMI: 0 0 LOC: 95979 98588 ERR: 1 MIS: 0 mythtv@corellia:~$ uptime ; cat /proc/interrupts 18:46:15 up 22 min, 2 users, load average: 0.77, 0.72, 0.56 CPU0 CPU1 0: 167 0 IO-APIC-edge timer 1: 10 0 IO-APIC-edge i8042 7: 1 0 IO-APIC-edge parport0 8: 43 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-fasteoi acpi 12: 113 0 IO-APIC-edge i8042 16: 79657 0 IO-APIC-fasteoi sata_sil24, nvidia 17: 176309 0 IO-APIC-fasteoi ohci_hcd:usb2, eth0 18: 10070 0 IO-APIC-fasteoi sata_nv, HDA Intel 19: 0 0 IO-APIC-fasteoi sata_nv 20: 36429 0 IO-APIC-fasteoi ehci_hcd:usb1 21: 2 0 IO-APIC-fasteoi ohci1394 22: 0 0 IO-APIC-fasteoi cx88[0], cx88[0] 23: 0 0 IO-APIC-fasteoi ivtv0 NMI: 0 0 LOC: 339343 349675 ERR: 1 MIS: 0 mythtv@corellia:~$ uptime ; cat /proc/interrupts 19:34:57 up 1:11, 2 users, load average: 0.63, 0.71, 0.65 CPU0 CPU1 0: 167 0 IO-APIC-edge timer 1: 10 0 IO-APIC-edge i8042 7: 1 0 IO-APIC-edge parport0 8: 43 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-fasteoi acpi 12: 113 0 IO-APIC-edge i8042 16: 257797 0 IO-APIC-fasteoi sata_sil24, nvidia 17: 609690 0 IO-APIC-fasteoi ohci_hcd:usb2, eth0 18: 20828 0 IO-APIC-fasteoi sata_nv, HDA Intel 19: 0 0 IO-APIC-fasteoi sata_nv 20: 116185 0 IO-APIC-fasteoi ehci_hcd:usb1 21: 2 0 IO-APIC-fasteoi ohci1394 22: 0 0 IO-APIC-fasteoi cx88[0], cx88[0] 23: 0 0 IO-APIC-fasteoi ivtv0 NMI: 0 0 LOC: 1081508 1115737 ERR: 1 MIS: 0 mythtv@corellia:~$ uptime ; cat /proc/interrupts 19:59:33 up 1:35, 2 users, load average: 0.78, 0.71, 0.65 CPU0 CPU1 0: 167 0 IO-APIC-edge timer 1: 10 0 IO-APIC-edge i8042 7: 1 0 IO-APIC-edge parport0 8: 43 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-fasteoi acpi 12: 113 0 IO-APIC-edge i8042 16: 347806 0 IO-APIC-fasteoi sata_sil24, nvidia 17: 758296 0 IO-APIC-fasteoi ohci_hcd:usb2, eth0 18: 25281 0 IO-APIC-fasteoi sata_nv, HDA Intel 19: 0 0 IO-APIC-fasteoi sata_nv 20: 156547 0 IO-APIC-fasteoi ehci_hcd:usb1 21: 2 0 IO-APIC-fasteoi ohci1394 22: 0 0 IO-APIC-fasteoi cx88[0], cx88[0] 23: 0 0 IO-APIC-fasteoi ivtv0 NMI: 0 0 LOC: 1452464 1502571 ERR: 1 MIS: 0 Here is some other information about my system. mythtv@corellia:~$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Genuine Intel(R) CPU 2160 @ 1.80GHz stepping : 2 cpu MHz : 1200.000 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 3604.19 clflush size : 64 processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Genuine Intel(R) CPU 2160 @ 1.80GHz stepping : 2 cpu MHz : 1200.000 cache size : 1024 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 3600.01 clflush size : 64 mythtv@corellia:~$ cat /proc/version Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 mythtv@corellia:~$ lspci 00:00.0 Host bridge: nVidia Corporation C55 Host Bridge (rev a2) 00:00.1 RAM memory: nVidia Corporation C55 Memory Controller (rev a1) 00:00.2 RAM memory: nVidia Corporation C55 Memory Controller (rev a1) 00:00.3 RAM memory: nVidia Corporation C55 Memory Controller (rev a1) 00:00.4 RAM memory: nVidia Corporation C55 Memory Controller (rev a1) 00:00.5 RAM memory: nVidia Corporation C55 Memory Controller (rev a2) 00:00.6 RAM memory: nVidia Corporation C55 Memory Controller (rev a1) 00:00.7 RAM memory: nVidia Corporation C55 Memory Controller (rev a1) 00:01.0 RAM memory: nVidia Corporation C55 Memory Controller (rev a1) 00:01.1 RAM memory: nVidia Corporation C55 Memory Controller (rev a1) 00:01.2 RAM memory: nVidia Corporation C55 Memory Controller (rev a1) 00:01.3 RAM memory: nVidia Corporation C55 Memory Controller (rev a1) 00:01.4 RAM memory: nVidia Corporation C55 Memory Controller (rev a1) 00:01.5 RAM memory: nVidia Corporation C55 Memory Controller (rev a1) 00:01.6 RAM memory: nVidia Corporation C55 Memory Controller (rev a1) 00:02.0 RAM memory: nVidia Corporation C55 Memory Controller (rev a1) 00:02.1 RAM memory: nVidia Corporation C55 Memory Controller (rev a1) 00:02.2 RAM memory: nVidia Corporation C55 Memory Controller (rev a1) 00:03.0 PCI bridge: nVidia Corporation C55 PCI Express bridge (rev a1) 00:06.0 PCI bridge: nVidia Corporation C55 PCI Express bridge (rev a1) 00:07.0 PCI bridge: nVidia Corporation C55 PCI Express bridge (rev a1) 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3) 00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a3) 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) 00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8600 GT (rev a1) 02:00.0 Mass storage controller: Silicon Image, Inc. Unknown device 3531 (rev 01) 04:06.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 04:06.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05) 04:07.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) 04:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev c0) mythtv@corellia:~$ dmesg [ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b000 (usable) [ 0.000000] BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable) [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffce000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 262080) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262080 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262080 [ 0.000000] On node 0 totalpages: 262080 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32449 pages, LIFO batch:7 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F8950 checksum 0 [ 0.000000] ACPI: RSDP 000F8950, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 3FFC0000, 0038 (r1 A M I OEMRSDT 7000712 MSFT 97) [ 0.000000] ACPI: FACP 3FFC0200, 0084 (r2 A M I OEMFACP 7000712 MSFT 97) [ 0.000000] ACPI: DSDT 3FFC0450, 4F74 (r1 1ADKV 1ADKV000 0 INTL 20051117) [ 0.000000] ACPI: FACS 3FFCE000, 0040 [ 0.000000] ACPI: APIC 3FFC0390, 0080 (r1 A M I OEMAPIC 7000712 MSFT 97) [ 0.000000] ACPI: MCFG 3FFC0410, 003C (r1 A M I OEMMCFG 7000712 MSFT 97) [ 0.000000] ACPI: OEMB 3FFCE040, 0061 (r1 A M I AMI_OEM 7000712 MSFT 97) [ 0.000000] ACPI: HPET 3FFC53D0, 0038 (r1 A M I OEMHPET0 7000712 MSFT 97) [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] Built 1 zonelists. Total pages: 260033 [ 0.000000] Kernel command line: root=UUID=f7bbb1fb-4f25-46cc-918e-13f03ff32a99 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1800.063 MHz processor. [ 24.201354] spurious 8259A interrupt: IRQ7. [ 24.202819] Console: colour VGA+ 80x25 [ 24.203071] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 24.203332] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 24.229439] Memory: 1027568k/1048320k available (2015k kernel code, 20012k reserved, 916k data, 364k init, 130816k highmem) [ 24.229447] virtual kernel memory layout: [ 24.229448] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 24.229449] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 24.229450] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 24.229451] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 24.229453] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 24.229454] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 24.229455] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 24.229458] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 24.229490] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 24.229638] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 24.229642] hpet0: 3 32-bit timers, 25000000 Hz [ 24.310539] Calibrating delay using timer specific routine.. 3604.19 BogoMIPS (lpj=7208399) [ 24.310561] Security Framework v1.0.0 initialized [ 24.310567] SELinux: Disabled at boot. [ 24.310579] Mount-cache hash table entries: 512 [ 24.310692] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 [ 24.310699] monitor/mwait feature present. [ 24.310701] using mwait in idle threads. [ 24.310705] CPU: L1 I cache: 32K, L1 D cache: 32K [ 24.310707] CPU: L2 cache: 1024K [ 24.310709] CPU: Physical Processor ID: 0 [ 24.310711] CPU: Processor Core ID: 0 [ 24.310712] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 [ 24.310721] Compat vDSO mapped to ffffe000. [ 24.310733] Checking 'hlt' instruction... OK. [ 24.326636] SMP alternatives: switching to UP code [ 24.327041] Early unpacking initramfs... done [ 24.653051] ACPI: Core revision 20070126 [ 24.653088] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 24.657296] CPU0: Intel Genuine Intel(R) CPU 2160 @ 1.80GHz stepping 02 [ 24.657311] SMP alternatives: switching to SMP code [ 24.657379] Booting processor 1/1 eip 3000 [ 24.667621] Initializing CPU#1 [ 24.745846] Calibrating delay using timer specific routine.. 3600.01 BogoMIPS (lpj=7200026) [ 24.745852] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 [ 24.745857] monitor/mwait feature present. [ 24.745859] CPU: L1 I cache: 32K, L1 D cache: 32K [ 24.745861] CPU: L2 cache: 1024K [ 24.745863] CPU: Physical Processor ID: 0 [ 24.745864] CPU: Processor Core ID: 1 [ 24.745866] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 [ 24.746199] CPU1: Intel Genuine Intel(R) CPU 2160 @ 1.80GHz stepping 02 [ 24.746220] Total of 2 processors activated (7204.21 BogoMIPS). [ 24.746535] ENABLING IO-APIC IRQs [ 24.746757] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 24.893694] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 24.913677] Brought up 2 CPUs [ 24.932947] migration_cost=504 [ 24.933058] Booting paravirtualized kernel on bare hardware [ 24.933133] Time: 5:23:55 Date: 09/16/107 [ 24.933149] NET: Registered protocol family 16 [ 24.933219] EISA bus registered [ 24.933223] ACPI: bus type pci registered [ 24.933454] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 [ 24.933456] PCI: Using configuration type 1 [ 24.933458] Setting up standard PCI resources [ 24.939998] ACPI: EC: Look up EC in DSDT [ 24.944773] ACPI: Interpreter enabled [ 24.944776] ACPI: (supports S0 S1 S3 S4 S5) [ 24.944792] ACPI: Using IOAPIC for interrupt routing [ 24.954164] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 24.954171] PCI: Probing PCI hardware (bus 00) [ 24.957157] PCI: Transparent bridge - 0000:00:10.0 [ 24.957221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 24.957448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 24.957624] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 24.957716] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PB._PRT] [ 24.957805] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 24.971106] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *5 [ 24.971307] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10 [ 24.971506] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 24.971703] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10 [ 24.971900] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10 [ 24.972098] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 24.972295] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *11 [ 24.972492] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. [ 24.972690] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [ 24.972887] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10 [ 24.973084] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 [ 24.973285] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 [ 24.973482] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. [ 24.973686] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled. [ 24.973884] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 24.974081] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 24.974279] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11 [ 24.974476] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5 [ 24.974710] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 24.974817] Linux Plug and Play Support v0.97 (c) Adam Belay [ 24.974827] pnp: PnP ACPI init [ 24.974835] ACPI: bus type pnp registered [ 24.980100] pnp: PnP ACPI: found 15 devices [ 24.980103] ACPI: ACPI bus type pnp unregistered [ 24.980106] PnPBIOS: Disabled by ACPI PNP [ 24.980158] PCI: Using ACPI for IRQ routing [ 24.980160] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 25.022907] NET: Registered protocol family 8 [ 25.022909] NET: Registered protocol family 20 [ 25.022968] pnp: 00:07: iomem range 0x0-0x0 could not be reserved [ 25.022972] pnp: 00:07: iomem range 0xfee01000-0xfeefffff has been reserved [ 25.022978] pnp: 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 25.022981] pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved [ 25.022986] pnp: 00:0c: ioport range 0xa00-0xadf has been reserved [ 25.022989] pnp: 00:0c: ioport range 0xae0-0xaef has been reserved [ 25.022993] pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 25.022998] pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 25.023001] pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved [ 25.023004] pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 25.023006] pnp: 00:0e: iomem range 0x100000-0x3fffffff could not be reserved [ 25.025410] Time: tsc clocksource has been installed. [ 25.025419] Switched to high resolution mode on CPU 0 [ 25.025497] Switched to high resolution mode on CPU 1 [ 25.053251] PCI: Bridge: 0000:00:03.0 [ 25.053253] IO window: c000-cfff [ 25.053257] MEM window: f8000000-fbefffff [ 25.053260] PREFETCH window: d0000000-dfffffff [ 25.053263] PCI: Bridge: 0000:00:06.0 [ 25.053266] IO window: d000-dfff [ 25.053269] MEM window: fbf00000-fbffffff [ 25.053272] PREFETCH window: disabled. [ 25.053275] PCI: Bridge: 0000:00:07.0 [ 25.053276] IO window: disabled. [ 25.053279] MEM window: disabled. [ 25.053282] PREFETCH window: disabled. [ 25.053286] PCI: Bridge: 0000:00:10.0 [ 25.053288] IO window: e000-efff [ 25.053294] MEM window: fc000000-febfffff [ 25.053299] PREFETCH window: f0000000-f3ffffff [ 25.053315] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 25.053325] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 25.053337] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 25.053351] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 25.053361] NET: Registered protocol family 2 [ 25.105305] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 25.105385] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 25.106092] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 25.106810] TCP: Hash tables configured (established 131072 bind 65536) [ 25.106813] TCP reno registered [ 25.121426] checking if image is initramfs... it is [ 25.763206] Freeing initrd memory: 7107k freed [ 25.763734] audit: initializing netlink socket (disabled) [ 25.763745] audit(1192512235.172:1): initialized [ 25.763840] highmem bounce pool size: 64 pages [ 25.765562] VFS: Disk quotas dquot_6.5.1 [ 25.765607] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 25.765686] io scheduler noop registered [ 25.765688] io scheduler anticipatory registered [ 25.765690] io scheduler deadline registered [ 25.765702] io scheduler cfq registered (default) [ 25.787792] Boot video device is 0000:01:00.0 [ 25.787888] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 25.787929] assign_interrupt_mode Found MSI capability [ 25.787931] Allocate Port Service[0000:00:03.0:pcie00] [ 25.788009] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 25.788050] assign_interrupt_mode Found MSI capability [ 25.788052] Allocate Port Service[0000:00:06.0:pcie00] [ 25.788126] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 25.788167] assign_interrupt_mode Found MSI capability [ 25.788169] Allocate Port Service[0000:00:07.0:pcie00] [ 25.788306] isapnp: Scanning for PnP cards... [ 26.141760] isapnp: No Plug & Play device found [ 26.160940] Real Time Clock Driver v1.12ac [ 26.161101] hpet_resources: 0xfed00000 is busy [ 26.161142] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 26.161272] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 26.161875] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 26.162556] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 26.162753] input: Macintosh mouse button emulation as /class/input/input0 [ 26.162826] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 26.165209] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 26.165214] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 26.165336] mice: PS/2 mouse device common for all mice [ 26.165436] EISA: Probing bus 0 at eisa.0 [ 26.165455] Cannot allocate resource for EISA slot 4 [ 26.165457] Cannot allocate resource for EISA slot 5 [ 26.165459] Cannot allocate resource for EISA slot 6 [ 26.165469] EISA: Detected 0 cards. [ 26.165546] TCP cubic registered [ 26.165558] NET: Registered protocol family 1 [ 26.165580] Using IPI No-Shortcut mode [ 26.165762] Magic number: 11:576:365 [ 26.165996] Freeing unused kernel memory: 364k freed [ 26.205072] input: AT Translated Set 2 keyboard as /class/input/input1 [ 27.353924] AppArmor: AppArmor initialized<5>audit(1192512236.672:2): type=1505 info="AppArmor initialized" pid=1253 [ 27.361267] fuse init (API version 7.8) [ 27.365526] Failure registering capabilities with primary security module. [ 27.397305] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 7C, should be 77 [20070126] [ 27.397312] ACPI: SSDT 3FFCE0B0, 01D2 (r1 AMI CPU1PM 1 INTL 20051117) [ 27.397665] ACPI: SSDT 3FFCE290, 0143 (r1 AMI CPU2PM 1 INTL 20051117) [ 27.397853] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 27.397862] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 27.936147] SCSI subsystem initialized [ 27.940598] libata version 2.21 loaded. [ 27.941703] sata_sil24 0000:02:00.0: version 0.9 [ 27.942026] ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 19 [ 27.942032] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNEC] -> GSI 19 (level, low) -> IRQ 16 [ 27.942063] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 27.942136] scsi0 : sata_sil24 [ 27.942169] ata1: SATA max UDMA/100 cmd 0xf8868000 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 27.943113] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 27.948163] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 27.948168] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 27.956642] usbcore: registered new interface driver usbfs [ 27.956663] usbcore: registered new interface driver hub [ 27.956683] usbcore: registered new device driver usb [ 27.999755] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 28.252310] ata1: SATA link down (SStatus 0 SControl 300) [ 28.252802] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 [ 28.252808] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 23 (level, low) -> IRQ 17 [ 28.252816] PCI: Setting latency timer of device 0000:00:14.0 to 64 [ 28.252824] forcedeth: using HIGHDMA [ 28.772131] eth0: forcedeth.c: subsystem: 01462:7350 bound to 0000:00:14.0 [ 28.775594] sata_nv 0000:00:0e.0: version 3.4 [ 28.775907] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22 [ 28.775913] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 22 (level, low) -> IRQ 18 [ 28.775948] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 28.775988] scsi1 : sata_nv [ 28.776178] scsi2 : sata_nv [ 28.776337] ata2: SATA max UDMA/133 cmd 0x0001b800 ctl 0x0001b482 bmdma 0x0001b000 irq 18 [ 28.776342] ata3: SATA max UDMA/133 cmd 0x0001b400 ctl 0x0001b082 bmdma 0x0001b008 irq 18 [ 29.242778] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 29.251121] ata2.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133 [ 29.251125] ata2.00: 488397168 sectors, multi 16: LBA48 [ 29.259111] ata2.00: configured for UDMA/133 [ 29.725989] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 29.889992] ata3.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33 [ 29.889995] ata3.00: applying bridge limits [ 30.061721] ata3.00: configured for UDMA/33 [ 30.061815] scsi 1:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5 [ 30.063026] scsi 2:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5 [ 30.063645] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 21 [ 30.063651] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LSA1] -> GSI 21 (level, low) -> IRQ 19 [ 30.063686] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 30.063724] scsi3 : sata_nv [ 30.063874] scsi4 : sata_nv [ 30.064039] ata4: SATA max UDMA/133 cmd 0x0001ac00 ctl 0x0001a882 bmdma 0x0001a400 irq 19 [ 30.064043] ata5: SATA max UDMA/133 cmd 0x0001a800 ctl 0x0001a482 bmdma 0x0001a408 irq 19 [ 30.372944] ata4: SATA link down (SStatus 0 SControl 300) [ 30.692437] ata5: SATA link down (SStatus 0 SControl 300) [ 30.703569] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 [ 30.703593] NFORCE-MCP51: chipset revision 161 [ 30.703595] NFORCE-MCP51: not 100% native mode: will probe irqs later [ 30.703605] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller [ 30.703615] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio [ 30.703627] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio [ 30.703635] Probing IDE interface ide0... [ 30.714877] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 30.714888] sd 1:0:0:0: [sda] Write Protect is off [ 30.714891] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 30.714905] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.714966] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 30.714975] sd 1:0:0:0: [sda] Write Protect is off [ 30.714977] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 30.714990] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.714994] sda: sda1 sda2 sda3 [ 30.740652] sd 1:0:0:0: [sda] Attached SCSI disk [ 30.744423] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 30.744442] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 30.749041] sr0: scsi3-mmc drive: 47x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 30.749045] Uniform CD-ROM driver Revision: 3.20 [ 30.749091] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 30.973054] Attempting manual resume [ 30.973058] swsusp: Resume From Partition 8:2 [ 30.973059] PM: Checking swsusp image. [ 30.973231] PM: Resume from disk failed. [ 30.997263] kjournald starting. Commit interval 5 seconds [ 30.997271] EXT3-fs: mounted filesystem with ordered data mode. [ 31.271541] Probing IDE interface ide1... [ 31.839063] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20 [ 31.839070] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 20 (level, low) -> IRQ 20 [ 31.839082] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 31.839086] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 31.839214] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 31.839242] ehci_hcd 0000:00:0b.1: debug port 1 [ 31.839249] PCI: cache line size of 32 is not supported by device 0000:00:0b.1 [ 31.839260] ehci_hcd 0000:00:0b.1: irq 20, io mem 0xf7ffec00 [ 31.839271] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 31.839353] usb usb1: configuration #1 chosen from 1 choice [ 31.839377] hub 1-0:1.0: USB hub found [ 31.839382] hub 1-0:1.0: 8 ports detected [ 31.942929] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 31.942933] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 17 [ 31.942946] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 31.942950] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 31.942976] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 31.942993] ohci_hcd 0000:00:0b.0: irq 17, io mem 0xf7fff000 [ 32.000438] usb usb2: configuration #1 chosen from 1 choice [ 32.000463] hub 2-0:1.0: USB hub found [ 32.000471] hub 2-0:1.0: 8 ports detected [ 32.102836] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18 [ 32.102843] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [LNKD] -> GSI 18 (level, low) -> IRQ 21 [ 32.154597] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 32.613387] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 32.835432] usb 1-6: configuration #1 chosen from 1 choice [ 33.144586] usb 2-3: new low speed USB device using ohci_hcd and address 2 [ 33.359330] usb 2-3: configuration #1 chosen from 1 choice [ 33.432284] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000010dc012ac676] [ 33.671709] usb 2-5: new full speed USB device using ohci_hcd and address 3 [ 33.889494] usb 2-5: configuration #1 chosen from 1 choice [ 38.036342] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 38.061226] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 38.251188] Linux video capture interface: v2.00 [ 38.341096] cx2388x v4l2 driver version 0.0.6 loaded [ 38.341469] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 [ 38.341475] ACPI: PCI Interrupt 0000:04:06.0[A] -> Link [LNKA] -> GSI 17 (level, low) -> IRQ 22 [ 38.341512] CORE cx88[0]: subsystem: 1462:8606, board: MSI TV-@nywhere Master [card=7,autodetected] [ 38.341515] TV tuner 33 at 0x1fe, Radio tuner -1 at 0x1fe [ 38.504671] input: cx88 IR (MSI TV-@nywhere Master as /class/input/input2 [ 38.504704] cx88[0]/0: found at 0000:04:06.0, rev: 5, irq: 22, latency: 64, mmio: 0xfd000000 [ 38.549861] tuner 0-0043: chip found @ 0x86 (cx88[0]) [ 38.549890] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 38.554759] tuner 0-0061: chip found @ 0xc2 (cx88[0]) [ 38.558927] tuner 0-0061: microtune: companycode=3cbf part=42 rev=22 [ 38.560871] tuner 0-0061: microtune MT2050 found, OK [ 38.565040] tuner 0-0061: microtune: companycode=3cbf part=42 rev=22 [ 38.567029] tuner 0-0061: microtune MT2050 found, OK [ 38.575120] input: PC Speaker as /class/input/input3 [ 38.599840] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5000 [ 38.599890] i2c-adapter i2c-2: nForce2 SMBus adapter at 0x6000 [ 38.637882] usbcore: registered new interface driver usbserial [ 38.638235] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic [ 38.638597] usbcore: registered new interface driver usbserial_generic [ 38.638600] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial Driver core [ 38.653039] ivtv: ==================== START INIT IVTV ==================== [ 38.653042] ivtv: version 1.0.0 (2.6.22-14-generic SMP mod_unload 586 ) loading [ 38.671406] Linux agpgart interface v0.102 (c) Dave Jones [ 38.671670] cx88[0]/0: registered device video0 [v4l2] [ 38.671687] cx88[0]/0: registered device vbi0 [ 38.671703] cx88[0]/0: registered device radio0 [ 38.674626] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 38.686915] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16 [ 38.686922] ACPI: PCI Interrupt 0000:04:07.0[A] -> Link [LNKB] -> GSI 16 (level, low) -> IRQ 23 [ 38.703193] usbcore: registered new interface driver hiddev [ 38.710033] input: BTC USB Multimedia Cordless Kit as /class/input/input4 [ 38.710064] input: USB HID v1.00 Keyboard [BTC USB Multimedia Cordless Kit ] on usb-0000:00:0b.0-3 [ 38.725326] input: BTC USB Multimedia Cordless Kit as /class/input/input5 [ 38.725403] input,hiddev96: USB HID v1.00 Mouse [BTC USB Multimedia Cordless Kit ] on usb-0000:00:0b.0-3 [ 38.725423] usbcore: registered new interface driver usbhid [ 38.725426] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 38.725446] usbcore: registered new interface driver libusual [ 38.728090] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device [ 38.728440] ftdi_sio 2-5:1.0: FTDI USB Serial Device converter detected [ 38.728629] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/ftdi_sio.c: Detected FT232BM [ 38.728877] usb 2-5: FTDI USB Serial Device converter now attached to ttyUSB0 [ 38.728887] usbcore: registered new interface driver ftdi_sio [ 38.728889] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver [ 38.871397] nvidia: module license 'NVIDIA' taints kernel. [ 39.122358] Initializing USB Mass Storage driver... [ 39.124675] scsi5 : SCSI emulation for USB Mass Storage devices [ 39.124765] usbcore: registered new interface driver usb-storage [ 39.124768] USB Mass Storage support registered. [ 39.124868] usb-storage: device found at 4 [ 39.124870] usb-storage: waiting for device to settle before scanning [ 39.290498] cx2388x alsa driver version 0.0.6 loaded [ 39.352230] ivtv0: loaded v4l-cx2341x-enc.fw firmware (4158869416 bytes) [ 39.442790] input: PS/2 Generic Mouse as /class/input/input6 [ 39.448112] parport_pc 00:06: reported by Plug and Play ACPI [ 39.448181] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 39.566374] ivtv0: Encoder revision: 0x02050032 [ 39.566378] ivtv0: Recommended firmware version is 0x02060039. [ 39.571373] tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #0) [ 39.571390] tda9887 3-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 39.574664] tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 39.647620] tveeprom 3-0050: Hauppauge model 26559, rev G189, serial# 9518221 [ 39.647623] tveeprom 3-0050: tuner model is TCL MFPE05 2 (idx 89, type 38) [ 39.647626] tveeprom 3-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) [ 39.647629] tveeprom 3-0050: audio processor is CX25843 (idx 37) [ 39.647631] tveeprom 3-0050: decoder processor is CX25843 (idx 30) [ 39.647633] tveeprom 3-0050: has radio, has no IR receiver, has no IR transmitter [ 39.647636] ivtv0: Autodetected Hauppauge WinTV PVR-150 [ 39.661570] cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) [ 43.214232] cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes) [ 43.318364] wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 43.366294] tuner 3-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 43.685793] ivtv0: Registered device video1 for encoder MPEG (4 MB) [ 43.685942] ivtv0: Registered device video32 for encoder YUV (2 MB) [ 43.686091] ivtv0: Registered device vbi1 for encoder VBI (1 MB) [ 43.686141] ivtv0: Registered device video24 for encoder PCM audio (1 MB) [ 43.686333] ivtv0: Registered device radio1 for encoder radio [ 43.714787] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 [ 43.714806] ivtv: ==================== END INIT IVTV ==================== [ 43.715135] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 43.715138] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 22 (level, low) -> IRQ 18 [ 43.715160] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 43.919422] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 44.035590] ACPI: PCI Interrupt 0000:04:06.1[A] -> Link [LNKA] -> GSI 17 (level, low) -> IRQ 22 [ 44.035621] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 44.036888] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 19 [ 44.036892] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEA] -> GSI 19 (level, low) -> IRQ 16 [ 44.036902] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 44.037077] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007 [ 44.115327] usb-storage: device scan complete [ 44.146432] scsi 5:0:0:0: Direct-Access Generic 2.0 Reader-CF 1.00 PQ: 0 ANSI: 0 CCS [ 44.177380] scsi 5:0:0:1: Direct-Access Generic 2.0 Reader-SM/xD 1.00 PQ: 0 ANSI: 0 CCS [ 44.196680] lp0: using parport0 (interrupt-driven). [ 44.208327] scsi 5:0:0:2: Direct-Access Generic 2.0 Reader-SD 1.00 PQ: 0 ANSI: 0 CCS [ 44.239681] scsi 5:0:0:3: Direct-Access Generic 2.0 Reader-MS 1.00 PQ: 0 ANSI: 0 CCS [ 44.247027] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 44.247060] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 44.250023] sd 5:0:0:1: [sdc] Attached SCSI removable disk [ 44.250054] sd 5:0:0:1: Attached scsi generic sg3 type 0 [ 44.253446] sd 5:0:0:2: [sdd] Attached SCSI removable disk [ 44.253485] sd 5:0:0:2: Attached scsi generic sg4 type 0 [ 44.255287] sd 5:0:0:3: [sde] Attached SCSI removable disk [ 44.255326] sd 5:0:0:3: Attached scsi generic sg5 type 0 [ 44.776123] Adding 1959920k swap on /dev/sda2. Priority:-1 extents:1 across:1959920k [ 45.087734] EXT3 FS on sda1, internal journal [ 45.537639] kjournald starting. Commit interval 5 seconds [ 45.537977] EXT3 FS on sda3, internal journal [ 45.537983] EXT3-fs: mounted filesystem with ordered data mode. [ 47.700320] No dock devices found. [ 47.713639] input: Power Button (FF) as /class/input/input7 [ 47.713663] ACPI: Power Button (FF) [PWRF] [ 47.713769] input: Power Button (CM) as /class/input/input8 [ 47.713784] ACPI: Power Button (CM) [PWRB] [ 49.055872] NET: Registered protocol family 10 [ 49.055969] lo: Disabled Privacy Extensions [ 49.670654] ppdev: user-space parallel port driver [ 49.877495] audit(1192512259.399:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5431 profile="/usr/sbin/cupsd" [ 51.553924] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 51.553929] apm: disabled - APM is not SMP safe. [ 53.233675] Failure registering capabilities with primary security module. [ 56.296849] Bluetooth: Core ver 2.11 [ 56.296911] NET: Registered protocol family 31 [ 56.296913] Bluetooth: HCI device and connection manager initialized [ 56.296918] Bluetooth: HCI socket layer initialized [ 56.325195] Bluetooth: L2CAP ver 2.8 [ 56.325201] Bluetooth: L2CAP socket layer initialized [ 56.330467] Bluetooth: RFCOMM socket layer initialized [ 56.330484] Bluetooth: RFCOMM TTY layer initialized [ 56.330487] Bluetooth: RFCOMM ver 1.8 [ 57.943782] NET: Registered protocol family 17 [ 71.482771] eth0: no IPv6 routers present