[ 0.000000] Linux version 2.6.24-3-generic (buildd@vernadsky) (gcc version 4.2.3 20071223 (prerelease) (Ubuntu 4.2.2-4ubuntu3)) #1 SMP Thu Jan 3 23:30:29 UTC 2008 (Ubuntu 2.6.24-3.5-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) [ 0.000000] BIOS-e820: 000000001ff60000 - 000000001ff78000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ff78000 - 000000001ff7a000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 130912) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 130912 [ 0.000000] HighMem 130912 -> 130912 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 130912 [ 0.000000] On node 0 totalpages: 130912 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 990 pages used for memmap [ 0.000000] Normal zone: 125826 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6D30 checksum 0 [ 0.000000] ACPI: RSDP 000F6D30, 0024 (r2 IBM ) [ 0.000000] ACPI: XSDT 1FF6EE35, 004C (r1 IBM TP-1O 1120 LTP 0) [ 0.000000] ACPI: FACP 1FF6EF00, 00F4 (r3 IBM TP-1O 1120 IBM 1) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT 1FF6F0E7, 8D6D (r1 IBM TP-1O 1120 MSFT 100000E) [ 0.000000] ACPI: FACS 1FF79000, 0040 [ 0.000000] ACPI: SSDT 1FF6F0B4, 0033 (r1 IBM TP-1O 1120 MSFT 100000E) [ 0.000000] ACPI: ECDT 1FF77E54, 0052 (r1 IBM TP-1O 1120 IBM 1) [ 0.000000] ACPI: TCPA 1FF77EA6, 0032 (r1 IBM TP-1O 1120 PTL 1) [ 0.000000] ACPI: BOOT 1FF77FD8, 0028 (r1 IBM TP-1O 1120 LTP 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df800000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129890 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffb000 (0140d000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1594.855 MHz processor. [ 25.348074] Console: colour VGA+ 80x25 [ 25.348081] console [tty0] enabled [ 25.348506] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 25.348938] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 25.364693] Memory: 507084k/523648k available (2127k kernel code, 16084k reserved, 988k data, 364k init, 0k highmem) [ 25.364709] virtual kernel memory layout: [ 25.364711] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 25.364712] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 25.364714] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 25.364716] lowmem : 0xc0000000 - 0xdff60000 ( 511 MB) [ 25.364718] .init : 0xc0411000 - 0xc046c000 ( 364 kB) [ 25.364720] .data : 0xc0313c7d - 0xc040ad64 ( 988 kB) [ 25.364721] .text : 0xc0100000 - 0xc0313c7d (2127 kB) [ 25.364727] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 25.364783] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 25.444808] Calibrating delay using timer specific routine.. 3193.69 BogoMIPS (lpj=6387383) [ 25.444849] Security Framework initialized [ 25.444860] SELinux: Disabled at boot. [ 25.444867] Capability LSM initialized [ 25.444888] Mount-cache hash table entries: 512 [ 25.445106] CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000 00000000 [ 25.445128] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 25.445133] CPU: L2 cache: 256K [ 25.445137] CPU: Hyper-Threading is disabled [ 25.445141] CPU: After all inits, caps: bfebf9ff 00000000 00000000 0000b080 00000400 00000000 00000000 00000000 [ 25.445161] Compat vDSO mapped to ffffe000. [ 25.445183] Checking 'hlt' instruction... OK. [ 25.461364] SMP alternatives: switching to UP code [ 25.463884] Freeing SMP alternatives: 11k freed [ 25.464117] Early unpacking initramfs... done [ 26.009960] ACPI: Core revision 20070126 [ 26.010086] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 26.015960] ACPI: setting ELCR to 0200 (from 0800) [ 26.028268] CPU0: Intel Mobile Intel(R) Celeron(R) CPU 1.60GHz stepping 07 [ 26.028280] SMP motherboard not detected. [ 26.028284] Local APIC not detected. Using dummy APIC emulation. [ 26.028363] Brought up 1 CPUs [ 26.028392] CPU0 attaching sched-domain: [ 26.028397] domain 0: span 01 [ 26.028401] groups: 01 [ 26.028748] net_namespace: 64 bytes [ 26.028759] Booting paravirtualized kernel on bare hardware [ 26.029753] Time: 7:52:02 Date: 01/27/08 [ 26.029861] NET: Registered protocol family 16 [ 26.030309] EISA bus registered [ 26.030333] ACPI: bus type pci registered [ 26.030598] PCI: PCI BIOS revision 2.10 entry at 0xfd936, last bus=5 [ 26.030603] PCI: Using configuration type 1 [ 26.030606] Setting up standard PCI resources [ 26.034607] ACPI: EC: EC description table is found, configuring boot EC [ 26.040199] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 26.043623] ACPI: Interpreter enabled [ 26.043630] ACPI: (supports S0 S3 S4 S5) [ 26.043656] ACPI: Using PIC for interrupt routing [ 26.061809] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 26.061816] ACPI: EC: driver started in poll mode [ 26.062098] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 26.062761] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 26.062768] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 26.063508] PCI: Transparent bridge - 0000:00:1e.0 [ 26.063633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 26.063730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 26.063767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 26.067050] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 26.067330] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 26.067601] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 26.067875] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 26.068146] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 26.068392] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 26.068640] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 26.068949] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 26.069305] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 26.069442] ACPI: Power Resource [PUBS] (on) [ 26.069575] Linux Plug and Play Support v0.97 (c) Adam Belay [ 26.069650] pnp: PnP ACPI init [ 26.069680] ACPI: bus type pnp registered [ 26.071201] pnpacpi: exceeded the max number of mem resources: 12 [ 26.071261] pnpacpi: exceeded the max number of mem resources: 12 [ 26.071315] pnpacpi: exceeded the max number of mem resources: 12 [ 26.071368] pnpacpi: exceeded the max number of mem resources: 12 [ 26.075562] pnp: PnP ACPI: found 12 devices [ 26.075569] ACPI: ACPI bus type pnp unregistered [ 26.075575] PnPBIOS: Disabled by ACPI PNP [ 26.076071] PCI: Using ACPI for IRQ routing [ 26.076077] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 26.100786] NET: Registered protocol family 8 [ 26.100791] NET: Registered protocol family 20 [ 26.104766] Time: tsc clocksource has been installed. [ 26.112864] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 26.112871] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 26.112876] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 26.112881] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 26.112886] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 26.112890] system 00:00: iomem range 0x0-0x0 could not be reserved [ 26.112894] system 00:00: iomem range 0x0-0x0 could not be reserved [ 26.112898] system 00:00: iomem range 0x0-0x0 could not be reserved [ 26.112903] system 00:00: iomem range 0xdc000-0xdffff has been reserved [ 26.112907] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 26.112912] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 26.112917] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 26.112930] system 00:02: ioport range 0x1000-0x107f has been reserved [ 26.112934] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 26.112939] system 00:02: ioport range 0x1600-0x167f has been reserved [ 26.143948] PCI: Bridge: 0000:00:01.0 [ 26.143955] IO window: 3000-3fff [ 26.143961] MEM window: d0100000-d01fffff [ 26.143967] PREFETCH window: e8000000-efffffff [ 26.143977] PCI: Bus 3, cardbus bridge: 0000:02:00.0 [ 26.143981] IO window: 00004000-000040ff [ 26.143987] IO window: 00004400-000044ff [ 26.143993] PREFETCH window: f0000000-f3ffffff [ 26.144000] MEM window: d4000000-d7ffffff [ 26.144006] PCI: Bridge: 0000:00:1e.0 [ 26.144010] IO window: 4000-8fff [ 26.144018] MEM window: d0200000-dfffffff [ 26.144024] PREFETCH window: f0000000-f7ffffff [ 26.144049] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 26.144634] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 26.144640] PCI: setting IRQ 11 as level-triggered [ 26.144645] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 26.144676] NET: Registered protocol family 2 [ 26.180906] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 26.181345] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 26.181466] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 26.181601] TCP: Hash tables configured (established 16384 bind 16384) [ 26.181606] TCP reno registered [ 26.193045] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 [ 26.692190] it is [ 27.252466] Freeing initrd memory: 7512k freed [ 27.252807] Simple Boot Flag at 0x35 set to 0x1 [ 27.253455] audit: initializing netlink socket (disabled) [ 27.253481] audit(1201420322.884:1): initialized [ 27.257410] VFS: Disk quotas dquot_6.5.1 [ 27.257578] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 27.257902] AppArmor: Unable to register AppArmor [ 27.257998] io scheduler noop registered [ 27.258002] io scheduler anticipatory registered [ 27.258005] io scheduler deadline registered [ 27.258036] io scheduler cfq registered (default) [ 27.258138] Boot video device is 0000:01:00.0 [ 27.258148] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling [ 27.258775] isapnp: Scanning for PnP cards... [ 27.612574] isapnp: No Plug & Play device found [ 27.718302] Real Time Clock Driver v1.12ac [ 27.718506] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 27.718936] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 27.721054] serial 00:09: activated [ 27.721598] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 27.722550] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 27.722558] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 27.722576] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 27.723984] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 27.724134] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 27.724368] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 27.726825] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 27.726833] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 27.728832] mice: PS/2 mouse device common for all mice [ 27.729155] EISA: Probing bus 0 at eisa.0 [ 27.729166] Cannot allocate resource for EISA slot 1 [ 27.729171] Cannot allocate resource for EISA slot 2 [ 27.729175] Cannot allocate resource for EISA slot 3 [ 27.729178] Cannot allocate resource for EISA slot 4 [ 27.729182] Cannot allocate resource for EISA slot 5 [ 27.729185] Cannot allocate resource for EISA slot 6 [ 27.729188] Cannot allocate resource for EISA slot 7 [ 27.729192] Cannot allocate resource for EISA slot 8 [ 27.729195] EISA: Detected 0 cards. [ 27.729201] cpuidle: using governor ladder [ 27.729204] cpuidle: using governor menu [ 27.729355] TCP cubic registered [ 27.729372] NET: Registered protocol family 1 [ 27.729429] Using IPI No-Shortcut mode [ 27.729630] Magic number: 8:78:876 [ 27.729729] hash matches device ptyx0 [ 27.730353] Freeing unused kernel memory: 364k freed [ 27.732319] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 29.264532] fuse init (API version 7.9) [ 29.404329] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 29.404344] ACPI: Processor [CPU] (supports 8 throttling states) [ 29.413798] ACPI: Thermal Zone [THM0] (62 C) [ 31.176094] usbcore: registered new interface driver usbfs [ 31.176138] usbcore: registered new interface driver hub [ 31.196078] usbcore: registered new device driver usb [ 31.216031] USB Universal Host Controller Interface driver v3.0 [ 31.216704] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 31.216710] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 31.216728] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 31.216735] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 31.217253] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 31.217296] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 [ 31.217556] usb usb1: configuration #1 chosen from 1 choice [ 31.217604] hub 1-0:1.0: USB hub found [ 31.217617] hub 1-0:1.0: 2 ports detected [ 31.320164] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 31.320186] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 31.320194] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 31.320237] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 31.320271] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 [ 31.320469] usb usb2: configuration #1 chosen from 1 choice [ 31.320512] hub 2-0:1.0: USB hub found [ 31.320524] hub 2-0:1.0: 2 ports detected [ 31.352384] SCSI subsystem initialized [ 31.424774] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 31.424782] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 31.424801] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 31.424808] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 31.424888] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 31.424923] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 [ 31.425139] usb usb3: configuration #1 chosen from 1 choice [ 31.425193] hub 3-0:1.0: USB hub found [ 31.425204] hub 3-0:1.0: 2 ports detected [ 31.485280] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 31.485287] e100: Copyright(c) 1999-2006 Intel Corporation [ 31.500311] libata version 3.00 loaded. [ 31.530673] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 31.530682] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 31.530707] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 31.530715] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 31.530798] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 31.534721] ehci_hcd 0000:00:1d.7: debug port 1 [ 31.534731] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 31.534744] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd0000000 [ 31.547948] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 31.548180] usb usb4: configuration #1 chosen from 1 choice [ 31.548228] hub 4-0:1.0: USB hub found [ 31.548241] hub 4-0:1.0: 6 ports detected [ 31.652909] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [ 31.652918] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 31.678709] e100: eth0: e100_probe: addr 0xd0200000, irq 11, MAC addr 00:06:1b:ca:59:3a [ 31.696859] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 31.696947] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 31.696969] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 31.709529] ata_piix 0000:00:1f.1: version 2.12 [ 31.709563] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 31.709636] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 31.731908] scsi0 : ata_piix [ 31.751934] scsi1 : ata_piix [ 31.753303] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 [ 31.753309] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 [ 31.916489] ata1.00: ATA-6: HTS726060M9AT00, MH4OA68A, max UDMA/100 [ 31.916497] ata1.00: 117210240 sectors, multi 16: LBA48 [ 31.932443] ata1.00: configured for UDMA/100 [ 32.207897] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 32.390232] usb 2-1: configuration #1 chosen from 1 choice [ 32.408343] ata2.00: ATAPI: UJDA740 DVD/CDRW, 1.04, max UDMA/33 [ 32.582027] ata2.00: configured for UDMA/33 [ 32.582263] scsi 0:0:0:0: Direct-Access ATA HTS726060M9AT00 MH4O PQ: 0 ANSI: 5 [ 32.585507] scsi 1:0:0:0: CD-ROM MATSHITA UJDA740 DVD/CDRW 1.04 PQ: 0 ANSI: 5 [ 33.237140] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 33.237170] sd 0:0:0:0: [sda] Write Protect is off [ 33.237175] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 33.237212] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.237317] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 33.237340] sd 0:0:0:0: [sda] Write Protect is off [ 33.237344] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 33.237380] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.237388] sda:<6>usbcore: registered new interface driver hiddev [ 33.261552] sda1 sda2 sda4 [ 33.262179] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input2 [ 33.262363] sd 0:0:0:0: [sda] Attached SCSI disk [ 33.270971] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 33.270981] Uniform CD-ROM driver Revision: 3.20 [ 33.271066] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 33.272488] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 33.272526] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 33.278350] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1 [ 33.278383] usbcore: registered new interface driver usbhid [ 33.278390] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 33.684323] kjournald starting. Commit interval 5 seconds [ 33.684351] EXT3-fs: mounted filesystem with ordered data mode. [ 34.209713] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 34.278254] ISO 9660 Extensions: RRIP_1991A [ 34.575993] Registering unionfs 1.4 [ 34.576000] unionfs: debugging is not enabled [ 34.597840] loop: module loaded [ 34.929103] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 140.566812] iTCO_vendor_support: vendor-support=0 [ 140.662796] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 141.278668] Linux agpgart interface v0.102 [ 141.502770] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 141.558620] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 141.558770] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) [ 141.558823] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 141.654711] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 142.314946] agpgart: Detected an Intel 845G Chipset. [ 142.318999] agpgart: AGP aperture is 64M @ 0xe0000000 [ 142.338661] input: Power Button (FF) as /devices/virtual/input/input4 [ 142.346493] ACPI: Power Button (FF) [PWRF] [ 142.346655] input: Lid Switch as /devices/virtual/input/input5 [ 142.347029] ACPI: Lid Switch [LID] [ 142.347148] input: Sleep Button (CM) as /devices/virtual/input/input6 [ 142.358489] ACPI: Sleep Button (CM) [SLPB] [ 142.602188] intel_rng: FWH not detected [ 143.821556] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 [ 143.821568] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 143.862333] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 143.877761] parport_pc 00:0a: reported by Plug and Play ACPI [ 143.877813] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 144.311294] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input8 [ 144.326280] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 145.903928] irda_init() [ 145.903967] NET: Registered protocol family 23 [ 145.915581] Yenta: CardBus bridge found at 0000:02:00.0 [1014:0528] [ 145.915612] Yenta: Using INTVAL to route CSC interrupts to PCI [ 145.915615] Yenta: Routing CardBus interrupts to PCI [ 145.915623] Yenta TI: socket 0000:02:00.0, mfunc 0x01d11002, devctl 0x64 [ 145.943696] ACPI: Battery Slot [BAT0] (battery absent) [ 145.982110] ACPI: AC Adapter [AC] (on-line) [ 146.150737] Yenta: ISA IRQ mask 0x0478, PCI irq 11 [ 146.150744] Socket status: 30000010 [ 146.150751] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff [ 146.150757] cs: IO port probe 0x4000-0x8fff: clean. [ 146.152727] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff [ 146.152732] pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff [ 146.156497] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [ 146.156530] nsc-ircc, chip->init [ 146.156542] nsc-ircc, Found chip at base=0x02e [ 146.156570] nsc-ircc, driver loaded (Dag Brattli) [ 146.156579] nsc_ircc_open(), can't get iobase of 0x2f8 [ 146.156611] nsc-ircc, Found chip at base=0x02e [ 146.156639] nsc-ircc, driver loaded (Dag Brattli) [ 146.156643] nsc_ircc_open(), can't get iobase of 0x2f8 [ 146.156893] nsc-ircc 00:0b: disabled [ 147.017746] pccard: PCMCIA card inserted into slot 0 [ 147.084739] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 147.084788] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 148.009586] intel8x0_measure_ac97_clock: measured 55241 usecs [ 148.009593] intel8x0: clocking to 48000 [ 149.160095] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 149.371649] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9 [ 149.913259] cs: memory probe 0xf0000000-0xf7ffffff: excluding 0xf0000000-0xf7ffffff [ 149.913298] cs: memory probe 0xd0200000-0xdfffffff: excluding 0xd0200000-0xd11fffff 0xd1a00000-0xd21fffff 0xd2a00000-0xd31fffff 0xd3a00000-0xd81fffff 0xd8a00000-0xd91fffff 0xd9a00000-0xda1fffff 0xdaa00000-0xdb1fffff 0xdba00000-0xdc1fffff 0xdca00000-0xdd1fffff 0xdda00000-0xde1fffff 0xdea00000-0xdf1fffff 0xdfa00000-0xe01fffff [ 149.924658] pcmcia: registering new device pcmcia0.0 [ 150.738366] cs: IO port probe 0x100-0x3af: clean. [ 150.739712] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 150.740307] cs: IO port probe 0x820-0x8ff: clean. [ 150.740814] cs: IO port probe 0xc00-0xcf7: clean. [ 150.741675] cs: IO port probe 0xa00-0xaff: clean. [ 151.104367] 0.0: ttyS2 at I/O 0x3e8 (irq = 3) is a 16450 [ 152.990572] Adding 489940k swap on /dev/sda1. Priority:-1 extents:1 across:489940k [ 155.026052] No dock devices found. [ 155.034127] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay [ 155.034138] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler [ 155.034222] ACPI: Error installing bay notify handler [ 155.034226] ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added [ 155.396087] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 156.868171] ACPI: Invalid _PSS data: freq is zero [ 161.417589] avahi-daemon[7531]: segfault at 00000000 eip 0804d82b esp bfd0a5b0 error 4 [ 181.717902] lp0: using parport0 (interrupt-driven). [ 181.823883] ppdev: user-space parallel port driver [ 185.934404] Non-volatile memory driver v1.2 [ 186.093124] thinkpad_acpi: ThinkPad ACPI Extras v0.17 [ 186.093133] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 186.093137] thinkpad_acpi: ThinkPad BIOS 1OET46WW (1.12 ), EC unknown [ 186.104829] thinkpad_acpi: another device driver is already handling bay events [ 186.104842] thinkpad_acpi: disabling subdriver bay [ 186.116372] input: ThinkPad Extra Buttons as /devices/virtual/input/input10 [ 189.127991] ttyS1: LSR safety check engaged! [ 190.918858] Bluetooth: Core ver 2.11 [ 190.919226] NET: Registered protocol family 31 [ 190.919234] Bluetooth: HCI device and connection manager initialized [ 190.919242] Bluetooth: HCI socket layer initialized [ 191.034835] Bluetooth: L2CAP ver 2.9 [ 191.034844] Bluetooth: L2CAP socket layer initialized [ 191.174791] Bluetooth: RFCOMM socket layer initialized [ 191.175079] Bluetooth: RFCOMM TTY layer initialized [ 191.175087] Bluetooth: RFCOMM ver 1.8 [ 199.196122] [drm] Initialized drm 1.1.0 20060810 [ 199.256967] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 199.257242] [drm] Initialized radeon 1.28.0 20060524 on minor 0 [ 200.913922] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 200.914371] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode [ 200.914743] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [ 202.263813] [drm] Setting GART location based on new memory map [ 202.263887] [drm] writeback test succeeded in 2 usecs [ 219.089258] NET: Registered protocol family 10 [ 219.090030] lo: Disabled Privacy Extensions [ 219.091351] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1256.995833] pccard: card ejected from slot 0 [ 1259.938138] pccard: PCMCIA card inserted into slot 0 [ 1259.938545] pcmcia: registering new device pcmcia0.0 [ 1259.984642] eth1: Xircom: port 0x43e0, irq 3, hwaddr 00:80:c7:7e:56:95 [ 1259.984679] pcmcia: registering new device pcmcia0.1 [ 1259.985305] 0.1: ttyS2 at I/O 0x43f8 (irq = 3) is a 16450 [ 1260.970100] eth1: media 10Base2, silicon revision 1 [ 1284.315610] NET: Registered protocol family 17