[ 0.000000] Linux version 2.6.22-13-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Thu Oct 4 17:52:26 GMT 2007 (Ubuntu 2.6.22-13.40-generic) [ 0.000000] Command line: root=UUID=f1fa8744-e9a2-4f6c-8d1b-d9858d9e2084 quiet splash resume=/dev/hda4 noapic [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000004fff0000 (usable) [ 0.000000] BIOS-e820: 000000004fff0000 - 000000004fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000004fff3000 - 0000000050000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 327664) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F78A0 checksum 0 [ 0.000000] ACPI: RSDP 000F78A0, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 4FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 4FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 4FFF3180, 66BF (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 4FFF0000, 0040 [ 0.000000] ACPI: SSDT 4FFF9940, 00F7 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: MCFG 4FFF9A80, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 4FFF9880, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000004fff0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 327664) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000004fff0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 327664 [ 0.000000] On node 0 totalpages: 327567 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1125 pages reserved [ 0.000000] DMA zone: 2818 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 4423 pages used for memmap [ 0.000000] DMA32 zone: 319145 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option. [ 0.000000] Using ACPI for processor (LAPIC) configuration information [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000 [ 0.000000] I/O APIC #2 at 0xFEC00000. [ 0.000000] Setting APIC routing to flat [ 0.000000] Processors: 1 [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 50000000:90000000) [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 321963 [ 0.000000] Kernel command line: root=UUID=f1fa8744-e9a2-4f6c-8d1b-d9858d9e2084 quiet splash resume=/dev/hda4 noapic [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 26.610525] time.c: Detected 2211.328 MHz processor. [ 26.611620] Console: colour VGA+ 80x25 [ 26.611638] Checking aperture... [ 26.611642] CPU 0: aperture @ cf62000000 size 32 MB [ 26.611644] Aperture too small (32 MB) [ 26.616552] No AGP bridge found [ 26.642053] Memory: 1280456k/1310656k available (2274k kernel code, 29812k reserved, 1181k data, 296k init) [ 26.642122] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 26.720514] Calibrating delay using timer specific routine.. 4425.36 BogoMIPS (lpj=8850737) [ 26.720564] Security Framework v1.0.0 initialized [ 26.720576] SELinux: Disabled at boot. [ 26.720761] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 26.723854] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 26.725419] Mount-cache hash table entries: 256 [ 26.725654] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 26.725657] CPU: L2 Cache: 512K (64 bytes/line) [ 26.725660] CPU 0/0 -> Node 0 [ 26.725691] SMP alternatives: switching to UP code [ 26.726272] Early unpacking initramfs... done [ 26.999990] ACPI: Core revision 20070126 [ 27.000083] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 27.002637] ACPI: setting ELCR to 0200 (from 0828) [ 27.004039] Using local APIC timer interrupts. [ 27.049256] result 12564363 [ 27.049258] Detected 12.564 MHz APIC timer. [ 27.052535] Brought up 1 CPUs [ 27.052762] NET: Registered protocol family 16 [ 27.052867] ACPI: bus type pci registered [ 27.052874] PCI: Using configuration type 1 [ 27.054093] ACPI: EC: Look up EC in DSDT [ 27.060507] ACPI: Interpreter enabled [ 27.060511] ACPI: (supports S0 S1 S3 S4 S5) [ 27.060525] ACPI: Using PIC for interrupt routing [ 27.069386] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 27.069397] PCI: Probing PCI hardware (bus 00) [ 27.069824] PCI: Transparent bridge - 0000:00:09.0 [ 27.070077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 27.070355] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 27.129803] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 27.129958] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 27.130112] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 27.130264] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 27.130415] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 27.130567] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 27.130718] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 27.130871] ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 27.131024] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 27.131176] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 27.131328] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 27.131480] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 27.131632] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 27.131792] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 27.131950] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 27.132107] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 27.132278] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 27.132440] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 27.132614] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 27.132783] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 27.132893] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 27.133063] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 27.133231] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 27.133398] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 27.133565] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 27.133732] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 27.133900] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 27.134068] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 27.134235] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 27.134408] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. [ 27.134581] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 27.134753] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 27.134844] Linux Plug and Play Support v0.97 (c) Adam Belay [ 27.134855] pnp: PnP ACPI init [ 27.134866] ACPI: bus type pnp registered [ 27.139234] pnp: PnP ACPI: found 13 devices [ 27.139237] ACPI: ACPI bus type pnp unregistered [ 27.139313] PCI: Using ACPI for IRQ routing [ 27.139317] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 27.139407] NET: Registered protocol family 8 [ 27.139409] NET: Registered protocol family 20 [ 27.139548] pnp: 00:01: ioport range 0x4000-0x407f has been reserved [ 27.139551] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved [ 27.139553] pnp: 00:01: ioport range 0x4400-0x447f has been reserved [ 27.139556] pnp: 00:01: ioport range 0x4480-0x44ff has been reserved [ 27.139559] pnp: 00:01: ioport range 0x4800-0x487f has been reserved [ 27.139561] pnp: 00:01: ioport range 0x4880-0x48ff has been reserved [ 27.139564] pnp: 00:01: iomem range 0x0-0x0 could not be reserved [ 27.139573] pnp: 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved [ 27.139577] pnp: 00:0c: iomem range 0xf0000-0xf3fff could not be reserved [ 27.139580] pnp: 00:0c: iomem range 0xf4000-0xf7fff could not be reserved [ 27.139582] pnp: 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 27.139585] pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 27.139875] PCI: Bridge: 0000:00:09.0 [ 27.139876] IO window: disabled. [ 27.139880] MEM window: d3000000-d30fffff [ 27.139882] PREFETCH window: disabled. [ 27.139885] PCI: Bridge: 0000:00:0b.0 [ 27.139886] IO window: disabled. [ 27.139888] MEM window: disabled. [ 27.139890] PREFETCH window: disabled. [ 27.139892] PCI: Bridge: 0000:00:0c.0 [ 27.139893] IO window: disabled. [ 27.139895] MEM window: disabled. [ 27.139897] PREFETCH window: disabled. [ 27.139899] PCI: Bridge: 0000:00:0d.0 [ 27.139900] IO window: disabled. [ 27.139902] MEM window: disabled. [ 27.139904] PREFETCH window: disabled. [ 27.139906] PCI: Bridge: 0000:00:0e.0 [ 27.139908] IO window: a000-afff [ 27.139911] MEM window: d0000000-d2ffffff [ 27.139913] PREFETCH window: c0000000-cfffffff [ 27.139921] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 27.139928] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 27.139933] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 27.139938] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 27.139943] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 27.139986] NET: Registered protocol family 2 [ 27.140480] Time: tsc clocksource has been installed. [ 27.172570] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 27.173699] TCP established hash table entries: 262144 (order: 10, 6291456 bytes) [ 27.182577] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 27.184060] TCP: Hash tables configured (established 262144 bind 65536) [ 27.184065] TCP reno registered [ 27.192657] checking if image is initramfs... it is [ 27.769573] Freeing initrd memory: 7197k freed [ 27.780921] audit: initializing netlink socket (disabled) [ 27.780938] audit(1191687224.128:1): initialized [ 27.782794] VFS: Disk quotas dquot_6.5.1 [ 27.782848] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 27.782963] io scheduler noop registered [ 27.782965] io scheduler anticipatory registered [ 27.782966] io scheduler deadline registered [ 27.783056] io scheduler cfq registered (default) [ 27.800654] PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 [ 27.800664] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 27.800670] PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 [ 27.800676] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 27.800681] PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 [ 27.800687] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 27.800692] PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 [ 27.800698] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 27.800705] Boot video device is 0000:01:00.0 [ 27.800861] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 27.800878] assign_interrupt_mode Found MSI capability [ 27.800882] Allocate Port Service[0000:00:0b.0:pcie00] [ 27.800937] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 27.800953] assign_interrupt_mode Found MSI capability [ 27.800955] Allocate Port Service[0000:00:0c.0:pcie00] [ 27.801008] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 27.801023] assign_interrupt_mode Found MSI capability [ 27.801025] Allocate Port Service[0000:00:0d.0:pcie00] [ 27.801071] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 27.801086] assign_interrupt_mode Found MSI capability [ 27.801088] Allocate Port Service[0000:00:0e.0:pcie00] [ 27.823767] Real Time Clock Driver v1.12ac [ 27.823903] Linux agpgart interface v0.102 (c) Dave Jones [ 27.823906] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 27.824007] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 27.824733] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 27.825419] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 27.825673] input: Macintosh mouse button emulation as /class/input/input0 [ 27.825775] PNP: No PS/2 controller found. Probing ports directly. [ 28.080818] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 28.080989] mice: PS/2 mouse device common for all mice [ 28.081160] TCP cubic registered [ 28.081228] NET: Registered protocol family 1 [ 28.081312] swsusp: Resume From Partition /dev/hda4 [ 28.081313] PM: Checking swsusp image. [ 28.081324] swsusp: Error -6 check for resume file [ 28.081325] PM: Resume from disk failed. [ 28.081544] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 28.081552] Freeing unused kernel memory: 296k freed [ 29.246176] AppArmor: AppArmor initialized<5>audit(1191687225.592:2): type=1505 info="AppArmor initialized" pid=1242 [ 29.253059] fuse init (API version 7.8) [ 29.257344] Failure registering capabilities with primary security module. [ 29.263676] ACPI: Fan [FAN] (on) [ 29.267938] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 29.269293] ACPI: Thermal Zone [THRM] (40 C) [ 29.874827] usbcore: registered new interface driver usbfs [ 29.874857] usbcore: registered new interface driver hub [ 29.874882] usbcore: registered new device driver usb [ 29.876184] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11 [ 29.876189] PCI: setting IRQ 11 as level-triggered [ 29.876192] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 11 (level, low) -> IRQ 11 [ 29.876393] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 29.876400] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 29.876608] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 29.876649] ehci_hcd 0000:00:02.1: debug port 1 [ 29.876652] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 29.876660] ehci_hcd 0000:00:02.1: irq 11, io mem 0xfeb00000 [ 29.876666] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 29.876767] usb usb1: configuration #1 chosen from 1 choice [ 29.876791] hub 1-0:1.0: USB hub found [ 29.876800] hub 1-0:1.0: 10 ports detected [ 29.890482] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 29.946533] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 29.946541] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 29.959513] SCSI subsystem initialized [ 29.964435] libata version 2.21 loaded. [ 29.978046] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 29.996400] ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11 [ 29.996407] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 11 (level, low) -> IRQ 11 [ 29.996648] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 29.996656] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 29.996724] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 29.996740] ohci_hcd 0000:00:02.0: irq 11, io mem 0xd3104000 [ 30.058152] usb usb2: configuration #1 chosen from 1 choice [ 30.058185] hub 2-0:1.0: USB hub found [ 30.058197] hub 2-0:1.0: 10 ports detected [ 30.164362] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 [ 30.164389] NFORCE-CK804: chipset revision 242 [ 30.164391] NFORCE-CK804: not 100% native mode: will probe irqs later [ 30.164397] NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller [ 30.164407] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 30.164417] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [ 30.164426] Probing IDE interface ide0... [ 30.456026] hda: WDC WD800JB-00FSA0, ATA DISK drive [ 30.663923] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 30.884008] usb 2-1: configuration #1 chosen from 1 choice [ 31.129672] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 31.145141] Probing IDE interface ide1... [ 31.191834] usb 2-2: new low speed USB device using ohci_hcd and address 3 [ 31.397928] usb 2-2: configuration #1 chosen from 1 choice [ 31.407372] usbcore: registered new interface driver hiddev [ 31.415046] input: PS/2+USB Mouse as /class/input/input1 [ 31.415069] input: USB HID v1.10 Mouse [PS/2+USB Mouse] on usb-0000:00:02.0-1 [ 31.421001] input: Key Tronic Keytronic USB Keyboard as /class/input/input2 [ 31.421010] input: USB HID v1.10 Keyboard [Key Tronic Keytronic USB Keyboard] on usb-0000:00:02.0-2 [ 31.421020] usbcore: registered new interface driver usbhid [ 31.421024] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 31.718576] sata_nv 0000:00:07.0: version 3.4 [ 31.718930] ACPI: PCI Interrupt Link [LSID] enabled at IRQ 11 [ 31.718933] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LSID] -> GSI 11 (level, low) -> IRQ 11 [ 31.718937] sata_nv 0000:00:07.0: Using ADMA mode [ 31.719149] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 31.719351] scsi0 : sata_nv [ 31.719401] scsi1 : sata_nv [ 31.719471] ata1: SATA max UDMA/133 cmd 0xffffc20000aa8480 ctl 0xffffc20000aa84a0 bmdma 0x000000000001d800 irq 11 [ 31.719476] ata2: SATA max UDMA/133 cmd 0xffffc20000aa8580 ctl 0xffffc20000aa85a0 bmdma 0x000000000001d808 irq 11 [ 31.728381] hda: max request size: 512KiB [ 31.730475] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) [ 31.731972] hda: cache flushes supported [ 31.732036] hda: hda1 hda2 hda3 hda4 [ 32.173131] Attempting manual resume [ 32.173135] swsusp: Resume From Partition 3:4 [ 32.173137] PM: Checking swsusp image. [ 32.187687] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 32.198995] PM: Resume from disk failed. [ 32.235444] ata1.00: ATA-7: ST3250620AS, 3.AAK, max UDMA/133 [ 32.235449] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 32.244547] kjournald starting. Commit interval 5 seconds [ 32.244557] EXT3-fs: mounted filesystem with ordered data mode. [ 32.310399] ata1.00: configured for UDMA/133 [ 32.623619] ata2: SATA link down (SStatus 0 SControl 300) [ 32.623788] scsi 0:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5 [ 32.623796] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 32.624231] ACPI: PCI Interrupt Link [LFID] enabled at IRQ 5 [ 32.624234] PCI: setting IRQ 5 as level-triggered [ 32.624237] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LFID] -> GSI 5 (level, low) -> IRQ 5 [ 32.624241] sata_nv 0000:00:08.0: Using ADMA mode [ 32.624471] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 32.624586] scsi2 : sata_nv [ 32.624665] scsi3 : sata_nv [ 32.624732] ata3: SATA max UDMA/133 cmd 0xffffc20000aaa480 ctl 0xffffc20000aaa4a0 bmdma 0x000000000001c400 irq 5 [ 32.624737] ata4: SATA max UDMA/133 cmd 0xffffc20000aaa580 ctl 0xffffc20000aaa5a0 bmdma 0x000000000001c408 irq 5 [ 33.095543] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 33.275588] ata3.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L02, max UDMA/100 [ 33.463551] ata3.00: configured for UDMA/100 [ 33.775427] ata4: SATA link down (SStatus 0 SControl 300) [ 33.776609] scsi 2:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1S 9L02 PQ: 0 ANSI: 5 [ 33.776619] ata3: bounce limit 0xFFFFFFFF, segment boundary 0xFFFF, hw segs 127 [ 33.777193] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 3 [ 33.777196] PCI: setting IRQ 3 as level-triggered [ 33.777199] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 3 (level, low) -> IRQ 3 [ 33.777205] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 33.777216] forcedeth: using HIGHDMA [ 34.299642] eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0 [ 34.300304] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 9 [ 34.300307] PCI: setting IRQ 9 as level-triggered [ 34.300310] ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [LNK1] -> GSI 9 (level, low) -> IRQ 9 [ 34.350591] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[d3004000-d30047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 35.623328] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000861ff9] [ 43.297521] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 43.297549] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 44.170690] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 44.172903] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 44.263569] parport_pc 00:08: reported by Plug and Play ACPI [ 44.263624] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 44.280943] input: PC Speaker as /class/input/input3 [ 44.288771] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 44.288779] Uniform CD-ROM driver Revision: 3.20 [ 44.291799] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 44.299926] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 44.300049] sd 0:0:0:0: [sda] Write Protect is off [ 44.300052] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 44.301298] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 44.301840] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 44.302716] sd 0:0:0:0: [sda] Write Protect is off [ 44.302721] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 44.302941] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 44.302949] sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 44.316706] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 44.318682] sda1 [ 44.318785] sd 0:0:0:0: [sda] Attached SCSI disk [ 44.775665] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 3 [ 44.775672] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LACI] -> GSI 3 (level, low) -> IRQ 3 [ 44.775837] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 45.105652] intel8x0_measure_ac97_clock: measured 58630 usecs [ 45.105656] intel8x0: clocking to 47034 [ 45.942688] Adding 3437900k swap on /dev/hda4. Priority:-1 extents:1 across:3437900k [ 127.248690] EXT3 FS on hda1, internal journal [ 418.744615] kjournald starting. Commit interval 5 seconds [ 418.744918] EXT3 FS on hda2, internal journal [ 418.744923] EXT3-fs: mounted filesystem with ordered data mode. [ 418.775460] kjournald starting. Commit interval 5 seconds [ 418.775713] EXT3 FS on hda3, internal journal [ 418.775716] EXT3-fs: mounted filesystem with ordered data mode. [ 418.799744] kjournald starting. Commit interval 5 seconds [ 418.807172] EXT3 FS on sda1, internal journal [ 418.807175] EXT3-fs: mounted filesystem with ordered data mode. [ 424.259293] No dock devices found. [ 424.399313] input: Power Button (FF) as /class/input/input4 [ 424.399621] ACPI: Power Button (FF) [PWRF] [ 424.408994] input: Power Button (CM) as /class/input/input5 [ 424.409310] ACPI: Power Button (CM) [PWRB] [ 424.871035] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (version 2.00.00) [ 424.871080] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8 [ 424.871083] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8 [ 424.871085] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa [ 424.871087] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 [ 429.062230] NET: Registered protocol family 10 [ 429.062342] lo: Disabled Privacy Extensions [ 429.934479] lp0: using parport0 (interrupt-driven). [ 430.009027] ppdev: user-space parallel port driver [ 430.656283] audit(1191687627.888:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5027 profile="/usr/sbin/cupsd" [ 430.929971] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 431.023447] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 431.032005] NFSD: starting 90-second grace period [ 431.753118] Marking TSC unstable due to cpufreq changes [ 431.754370] Time: acpi_pm clocksource has been installed. [ 432.188238] Failure registering capabilities with primary security module. [ 436.051227] NET: Registered protocol family 17 [ 442.666148] eth0: no IPv6 routers present