Linux version 2.6.22-12-xen (buildd@vernadsky) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23 19:53:38 GMT 2007 () Reserving virtual address space above 0xf5800000 BIOS-provided physical RAM map: Xen: 0000000000000000 - 00000000f1022000 (usable) 3128MB HIGHMEM available. 728MB LOWMEM available. NX (Execute Disable) protection: active Entering add_active_range(0, 0, 987170) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 186368 Normal 186368 -> 186368 HighMem 186368 -> 987170 early_node_map[1] active PFN ranges 0: 0 -> 987170 On node 0 totalpages: 987170 DMA zone: 1456 pages used for memmap DMA zone: 0 pages reserved DMA zone: 184912 pages, LIFO batch:31 Normal zone: 0 pages used for memmap HighMem zone: 6256 pages used for memmap HighMem zone: 794546 pages, LIFO batch:31 found SMP MP-table at 000fe200 DMI 2.4 present. ACPI: RSDP 000FE020, 0014 (r0 INTEL ) ACPI: RSDT CF6FD038, 004C (r1 INTEL DG965WH 685 1000013) ACPI: FACP CF6FC000, 0074 (r1 INTEL DG965WH 685 MSFT 1000013) ACPI: DSDT CF6F7000, 40E9 (r1 INTEL DG965WH 685 MSFT 1000013) ACPI: FACS CF6A0000, 0040 ACPI: APIC CF6F6000, 0078 (r1 INTEL DG965WH 685 MSFT 1000013) ACPI: WDDT CF6F5000, 0040 (r1 INTEL DG965WH 685 MSFT 1000013) ACPI: MCFG CF6F4000, 003C (r1 INTEL DG965WH 685 MSFT 1000013) ACPI: ASF! CF6F3000, 00A6 (r32 INTEL DG965WH 685 MSFT 1000013) ACPI: SSDT CF6F1000, 01BC (r1 INTEL CpuPm 685 MSFT 1000013) ACPI: SSDT CF6F0000, 0175 (r1 INTEL Cpu0Ist 685 MSFT 1000013) ACPI: SSDT CF6EF000, 0175 (r1 INTEL Cpu1Ist 685 MSFT 1000013) ACPI: SSDT CF6EE000, 0175 (r1 INTEL Cpu2Ist 685 MSFT 1000013) ACPI: SSDT CF6ED000, 0175 (r1 INTEL Cpu3Ist 685 MSFT 1000013) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at d4000000 (gap: d0000000:2ff00000) Built 1 zonelists. Total pages: 979458 Kernel command line: root=UUID=9919d249-361b-4d0a-8ff8-688f0a32de4b ro console=tty0 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Xen reported: 2397.684 MHz processor. Console: colour VGA+ 80x50 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB enabled: Aperture: 64 megabytes Kernel range: c3ecd000 - c7ecd000 Address size: 27 bits vmalloc area: ee000000-f51fe000, maxmem 2d800000 Memory: 3812220k/3948680k available (1789k kernel code, 127392k reserved, 757k data, 180k init, 3203208k highmem) virtual kernel memory layout: fixmap : 0xf5557000 - 0xf57ff000 (2720 kB) pkmap : 0xf5200000 - 0xf5400000 (2048 kB) vmalloc : 0xee000000 - 0xf51fe000 ( 113 MB) lowmem : 0xc0000000 - 0xed800000 ( 728 MB) .init : 0xc0384000 - 0xc03b1000 ( 180 kB) .data : 0xc02bf630 - 0xc037cde4 ( 757 kB) .text : 0xc0100000 - 0xc02bf630 (1789 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4802.22 BogoMIPS (lpj=9604447) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebd3f1 20100000 00000000 00000000 0000e3bd 00000000 00000001 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: After all inits, caps: bfebd3f1 20100000 00000000 00003940 0000e3bd 00000000 00000001 Compat vDSO mapped to f57fe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Early unpacking initramfs... done ACPI: Core revision 20070126 ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. ENABLING IO-APIC IRQs SMP alternatives: switching to SMP code Initializing CPU#1 Initializing CPU#2 Brought up 4 CPUs Initializing CPU#3 migration_cost=6438 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0500-053f claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered xen_mem: Initialising balloon driver. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report ACPI: RTC can wake from S4 pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved pnp: 00:06: ioport range 0x500-0x53f has been reserved pnp: 00:06: ioport range 0x400-0x47f has been reserved pnp: 00:06: ioport range 0x680-0x6ff has been reserved PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: e0400000-e04fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: 1000-1fff MEM window: e0100000-e01fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: e0500000-e05fffff Time: xen clocksource has been installed. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: e0600000-e06fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: e0700000-e07fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: e0000000-e00fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Unpacking initramfs... done Freeing initrd memory: 20796k freed audit: initializing netlink socket (disabled) audit(1191418528.552:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] Real Time Clock Driver v1.12ac floppy0: no floppy controllers found Event-channel device installed. Successfully initialized TPM backend driver. PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: PC Speaker as /class/input/input1 NET: Registered protocol family 1 Using IPI No-Shortcut mode Freeing unused kernel memory: 180k freed AppArmor: AppArmor initialized<5>audit(1191418532.124:2): type=1505 info="AppArmor initialized" pid=798 fuse init (API version 7.8) Failure registering capabilities with primary security module. ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Processor [CPU2] (supports 8 throttling states) ACPI: Processor [CPU3] (supports 8 throttling states) device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:9f:b2:e3 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem initialized libata version 2.21 loaded. e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0325c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 21, io mem 0xe0325800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 17, io base 0x000020c0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 22, io base 0x000020a0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 21, io base 0x00002080 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 2-1: new high speed USB device using ehci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 2-1: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... ahci 0000:00:1f.2: version 2.2 ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19 usb 4-1: new low speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage usbcore: registered new interface driver hiddev USB Mass Storage support registered. input: HID 1241:1177 as /class/input/input2 input: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:1a.1-1 usbcore: registered new interface driver usbhid /build/buildd/linux-source-2.6.22-2.6.22/debian/build/custom-source-xen/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci scsi6 : ahci ata1: SATA max UDMA/133 cmd 0xee032100 ctl 0x00000000 bmdma 0x00000000 irq 19 ata2: SATA max UDMA/133 cmd 0xee032180 ctl 0x00000000 bmdma 0x00000000 irq 19 ata3: SATA max UDMA/133 cmd 0xee032200 ctl 0x00000000 bmdma 0x00000000 irq 19 ata4: SATA max UDMA/133 cmd 0xee032280 ctl 0x00000000 bmdma 0x00000000 irq 19 ata5: SATA max UDMA/133 cmd 0xee032300 ctl 0x00000000 bmdma 0x00000000 irq 19 ata6: SATA max UDMA/133 cmd 0xee032380 ctl 0x00000000 bmdma 0x00000000 irq 19 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-6: HDS722516VLSA80, V34OA6MA, max UDMA/100 ata1.00: 321672960 sectors, multi 0: LBA48 ata1.00: configured for UDMA/100 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-7: HDS724040KLSA80, KFAOA46A, max UDMA/133 ata2.00: 781422768 sectors, multi 0: LBA48 ata2.00: configured for UDMA/133 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) scsi 1:0:0:0: Direct-Access ATA HDS722516VLSA80 V34O PQ: 0 ANSI: 5 scsi 2:0:0:0: Direct-Access ATA HDS724040KLSA80 KFAO PQ: 0 ANSI: 5 ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19 sd 1:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0004000-e00047ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 scsi7 : pata_marvell scsi8 : pata_marvell ata7: PATA max UDMA/100 cmd 0x00011018 ctl 0x00011026 bmdma 0x00011000 irq 16 ata8: DUMMY BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 1:0:0:0: [sda] Attached SCSI disk sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 < sdb5 sdb6 > sd 2:0:0:0: [sdb] Attached SCSI disk sd 1:0:0:0: Attached scsi generic sg0 type 0 sd 2:0:0:0: Attached scsi generic sg1 type 0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001d1500b] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S162L TS04 PQ: 0 ANSI: 0 scsi 0:0:0:0: Attached scsi generic sg2 type 5 usb-storage: device scan complete heci: Intel(R) AMT Management Interface - version 3.1.0.17 heci: Copyright (c) 2003 - 2007 Intel Corporation. ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:03.0 to 64 heci: link layer has been established. heci: heci driver initialization successful. parport_pc 00:07: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel 965G Chipset. agpgart: Detected 7676K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 iTCO_vendor_support: vendor-support=0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) iTCO_wdt: Found a ICH8DH TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA /build/buildd/linux-source-2.6.22-2.6.22/debian/build/custom-source-xen/sound/pci/hda/hda_codec.c:2331: autoconfig: line_outs=3 (0xd/0xf/0x10/0x0/0x0) ALSA /build/buildd/linux-source-2.6.22-2.6.22/debian/build/custom-source-xen/sound/pci/hda/hda_codec.c:2335: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA /build/buildd/linux-source-2.6.22-2.6.22/debian/build/custom-source-xen/sound/pci/hda/hda_codec.c:2339: hp_outs=1 (0xa/0x0/0x0/0x0/0x0) ALSA /build/buildd/linux-source-2.6.22-2.6.22/debian/build/custom-source-xen/sound/pci/hda/hda_codec.c:2347: inputs: mic=0xe, fmic=0xb, line=0xc, fline=0x0, cd=0x0, aux=0x0 ALSA /build/buildd/linux-source-2.6.22-2.6.22/debian/build/custom-source-xen/sound/pci/hda/patch_sigmatel.c:1221: dac_nids=4 (0x2/0x5/0x4/0x3/0x0) lp0: using parport0 (interrupt-driven). loop: module loaded Adding 10482372k swap on /dev/sda6. Priority:-1 extents:1 across:10482372k EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input4 ACPI: Sleep Button (CM) [SLPB] No dock devices found. NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 ppdev: user-space parallel port driver e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX audit(1191418550.099:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4338 profile="/usr/sbin/cupsd" audit(1191418550.107:4): type=1503 operation="inode_permission" requested_mask="w" denied_mask="w" name="/etc/krb5.conf" pid=4338 profile="/usr/sbin/cupsd" Bridge firewalling registered Setting mem allocation to 3940488 kiB Setting mem allocation to 3940488 kiB Failure registering capabilities with primary security module. Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [drm] Initialized i915 1.6.0 20060119 on minor 0 [drm:i915_initialize] *ERROR* Can not allocate hardware status page [drm:drm_unlock] *ERROR* Process 7886 using kernel context 0 NET: Registered protocol family 17 eth0: no IPv6 routers present