uname -a
Linux Eddesktop 2.6.22-14-generic #1 SMP Tue Feb 12 07:42:25 UTC 2008 i686 GNU/Linux


cat /proc/version_signature
Ubuntu 2.6.22-14.52-generic


sudo lspci -vvnn
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:0314]
        Subsystem: Elitegroup Computer Systems Unknown device [1019:1623]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 8
        Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [80] AGP version 3.5
                Status: RQ=8 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
                Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ Rate=x8
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:1314]
        Subsystem: Elitegroup Computer Systems Unknown device [1019:1623]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:00.2 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:2314]
        Subsystem: Elitegroup Computer Systems Unknown device [1019:1623]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:00.3 Host bridge [0600]: VIA Technologies, Inc. PT890 Host Bridge [1106:3208]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:00.4 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:4314]
        Subsystem: Elitegroup Computer Systems Unknown device [1019:1623]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:00.7 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:7314]
        Subsystem: Elitegroup Computer Systems Unknown device [1019:1623]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI Bridge [1106:b198] (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000a000-0000cfff
        Memory behind bridge: ff500000-ff5fffff
        Prefetchable memory behind bridge: d7f00000-f7efffff
        Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR+ <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
        Capabilities: [70] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
        Subsystem: Linksys Unknown device [1737:0015]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at ff6fe000 (32-bit, non-prefetchable) [size=8K]

00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: Elitegroup Computer Systems Unknown device [1019:1623]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin B routed to IRQ 17
        Region 0: I/O ports at ec00 [size=8]
        Region 1: I/O ports at e880 [size=4]
        Region 2: I/O ports at e800 [size=8]
        Region 3: I/O ports at e480 [size=4]
        Region 4: I/O ports at e400 [size=16]
        Region 5: I/O ports at e000 [size=256]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
        Subsystem: Elitegroup Computer Systems Unknown device [1019:1623]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32
        Interrupt: pin A routed to IRQ 17
        Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
        Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
        Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
        Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
        Region 4: I/O ports at fc00 [size=16]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
        Subsystem: Elitegroup Computer Systems Unknown device [1019:1623]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at dc00 [size=32]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
        Subsystem: Elitegroup Computer Systems Unknown device [1019:1623]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at d880 [size=32]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
        Subsystem: Elitegroup Computer Systems Unknown device [1019:1623]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size: 32 bytes
        Interrupt: pin B routed to IRQ 16
        Region 4: I/O ports at d800 [size=32]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
        Subsystem: Elitegroup Computer Systems Unknown device [1019:1623]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size: 32 bytes
        Interrupt: pin B routed to IRQ 16
        Region 4: I/O ports at d480 [size=32]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20 [EHCI])
        Subsystem: Elitegroup Computer Systems Unknown device [1019:1623]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size: 128 bytes
        Interrupt: pin C routed to IRQ 16
        Region 0: Memory at ff6fdc00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
        Subsystem: Elitegroup Computer Systems Unknown device [1019:1623]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
        Subsystem: Elitegroup Computer Systems Unknown device [1019:aa51]
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin C routed to IRQ 19
        Region 0: I/O ports at d000 [size=256]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 78)
        Subsystem: Elitegroup Computer Systems Unknown device [1019:0102]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at ee00 [size=256]
        Region 1: Memory at ff6fd800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AS [Radeon 9550] [1002:4153] (prog-if 00 [VGA])
        Subsystem: Unknown device [1fd3:4153]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 255 (2000ns min), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at c000 [size=256]
        Region 2: Memory at ff5f0000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at ff5c0000 [disabled] [size=128K]
        Capabilities: [58] AGP version 3.0
                Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
                Command: RQ=8 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ Rate=x8
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.1 Display controller [0380]: ATI Technologies Inc RV350 AS [Radeon 9550] (Secondary) [1002:4173]
        Subsystem: Unknown device [1fd3:4152]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (2000ns min), Cache Line Size: 32 bytes
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
        Region 1: Memory at ff5e0000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-


dmesg
[    0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001ffc0000 (usable)
[    0.000000]  BIOS-e820: 000000001ffc0000 - 000000001ffce000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001ffce000 - 000000001fff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000] found SMP MP-table at 000ff780
[    0.000000] Entering add_active_range(0, 0, 131008) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   131008
[    0.000000]   HighMem    131008 ->   131008
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   131008
[    0.000000] On node 0 totalpages: 131008
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 991 pages used for memmap
[    0.000000]   Normal zone: 125921 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F8750 checksum 0
[    0.000000] ACPI: RSDP 000F8750, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT 1FFC0000, 0030 (r1 A M I  OEMRSDT   7000620 MSFT       97)
[    0.000000] ACPI: FACP 1FFC0200, 0084 (r2 A M I  OEMFACP   7000620 MSFT       97)
[    0.000000] ACPI: DSDT 1FFC0400, 3BB1 (r1  12345 12345123      123 INTL 20051117)
[    0.000000] ACPI: FACS 1FFCE000, 0040
[    0.000000] ACPI: APIC 1FFC0390, 006C (r1 A M I  OEMAPIC   7000620 MSFT       97)
[    0.000000] ACPI: OEMB 1FFCE040, 0060 (r1 A M I  AMI_OEM   7000620 MSFT       97)
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:6 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[    0.000000] Built 1 zonelists.  Total pages: 129985
[    0.000000] Kernel command line: root=UUID=3d32e76a-f140-4be2-bc35-0203e994391a ro splash vga=795
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 3467.355 MHz processor.
[   25.276611] Console: colour dummy device 80x25
[   25.276999] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   25.277287] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   25.286136] Memory: 507916k/524032k available (2015k kernel code, 15488k reserved, 915k data, 364k init, 0k highmem)
[   25.286153] virtual kernel memory layout:
[   25.286154]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[   25.286155]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   25.286156]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
[   25.286156]     lowmem  : 0xc0000000 - 0xdffc0000   ( 511 MB)
[   25.286157]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[   25.286158]       .data : 0xc02f7e86 - 0xc03dce84   ( 915 kB)
[   25.286159]       .text : 0xc0100000 - 0xc02f7e86   (2015 kB)
[   25.286170] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   25.286210] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   25.366144] Calibrating delay using timer specific routine.. 6942.79 BogoMIPS (lpj=13885599)
[   25.366171] Security Framework v1.0.0 initialized
[   25.366178] SELinux:  Disabled at boot.
[   25.366190] Mount-cache hash table entries: 512
[   25.366314] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e41d 00000000 00000001
[   25.366322] monitor/mwait feature present.
[   25.366326] using mwait in idle threads.
[   25.366333] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   25.366337] CPU: L2 cache: 512K
[   25.366341] CPU: Hyper-Threading is disabled
[   25.366343] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000e41d 00000000 00000001
[   25.366353] Compat vDSO mapped to ffffe000.
[   25.366370] Checking 'hlt' instruction... OK.
[   25.382216] SMP alternatives: switching to UP code
[   25.382452] Freeing SMP alternatives: 11k freed
[   25.382737] Early unpacking initramfs... done
[   25.633706] ACPI: Core revision 20070126
[   25.633769] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   25.636106] CPU0: Intel(R) Celeron(R) D CPU 3.46GHz stepping 05
[   25.636149] Total of 1 processors activated (6942.79 BogoMIPS).
[   25.636904] ENABLING IO-APIC IRQs
[   25.637243] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   25.781680] Brought up 1 CPUs
[   25.781844] Booting paravirtualized kernel on bare hardware
[   25.781951] Time:  7:59:01  Date: 03/23/108
[   25.781982] NET: Registered protocol family 16
[   25.782090] EISA bus registered
[   25.782112] ACPI: bus type pci registered
[   25.782262] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=1
[   25.782266] PCI: Using configuration type 1
[   25.782268] Setting up standard PCI resources
[   25.795492] ACPI: EC: Look up EC in DSDT
[   25.800244] ACPI: Interpreter enabled
[   25.800253] ACPI: (supports S0 S1 S3 S4 S5)
[   25.800274] ACPI: Using IOAPIC for interrupt routing
[   25.809091] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   25.809111] PCI: Probing PCI hardware (bus 00)
[   25.810340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   25.810517] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   25.819323] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   25.819433] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   25.819535] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   25.819634] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   25.819737] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   25.819840] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   25.819941] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   25.820045] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   25.820142] Linux Plug and Play Support v0.97 (c) Adam Belay
[   25.820158] pnp: PnP ACPI init
[   25.820169] ACPI: bus type pnp registered
[   25.824719] pnp: PnP ACPI: found 11 devices
[   25.824726] ACPI: ACPI bus type pnp unregistered
[   25.824732] PnPBIOS: Disabled by ACPI PNP
[   25.824793] PCI: Using ACPI for IRQ routing
[   25.824798] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   25.831958] NET: Registered protocol family 8
[   25.831961] NET: Registered protocol family 20
[   25.832048] pnp: 00:07: ioport range 0xa00-0xa0f has been reserved
[   25.832053] pnp: 00:07: ioport range 0x290-0x29f has been reserved
[   25.832056] pnp: 00:07: ioport range 0xa20-0xa2f has been reserved
[   25.832060] pnp: 00:07: ioport range 0xa30-0xa3f has been reserved
[   25.832063] pnp: 00:07: ioport range 0xa40-0xa4f has been reserved
[   25.832072] pnp: 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[   25.832076] pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
[   25.832083] pnp: 00:0a: iomem range 0x0-0x9ffff could not be reserved
[   25.832087] pnp: 00:0a: iomem range 0xc0000-0xcffff could not be reserved
[   25.832090] pnp: 00:0a: iomem range 0xe0000-0xfffff could not be reserved
[   25.832094] pnp: 00:0a: iomem range 0x100000-0x1fffffff could not be reserved
[   25.833581] Time: tsc clocksource has been installed.
[   25.862380] PCI: Bridge: 0000:00:01.0
[   25.862385]   IO window: a000-cfff
[   25.862391]   MEM window: ff500000-ff5fffff
[   25.862397]   PREFETCH window: d7f00000-f7efffff
[   25.862420] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   25.862433] NET: Registered protocol family 2
[   25.901548] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   25.901601] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[   25.901742] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[   25.901845] TCP: Hash tables configured (established 16384 bind 16384)
[   25.901849] TCP reno registered
[   25.913638] checking if image is initramfs... it is
[   26.364938] Switched to high resolution mode on CPU 0
[   26.405684] Freeing initrd memory: 7118k freed
[   26.406194] audit: initializing netlink socket (disabled)
[   26.406213] audit(1208937540.944:1): initialized
[   26.408160] VFS: Disk quotas dquot_6.5.1
[   26.408226] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   26.408333] io scheduler noop registered
[   26.408337] io scheduler anticipatory registered
[   26.408340] io scheduler deadline registered
[   26.408359] io scheduler cfq registered (default)
[   26.408376] PCI: VIA PCI bridge detected. Disabling DAC.
[   26.408448] PCI: Bypassing VIA 8237 APIC De-Assert Message
[   26.408459] Boot video device is 0000:01:00.0
[   26.408626] isapnp: Scanning for PnP cards...
[   26.760257] isapnp: No Plug & Play device found
[   26.793121] Real Time Clock Driver v1.12ac
[   26.793227] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   26.794758] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   26.795009] input: Macintosh mouse button emulation as /class/input/input0
[   26.795092] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   26.795096] PNP: PS/2 controller doesn't have AUX irq; using default 12
[   26.795493] serio: i8042 KBD port at 0x60,0x64 irq 1
[   26.795500] serio: i8042 AUX port at 0x60,0x64 irq 12
[   26.795662] mice: PS/2 mouse device common for all mice
[   26.795779] EISA: Probing bus 0 at eisa.0
[   26.795823] EISA: Detected 0 cards.
[   26.796001] TCP cubic registered
[   26.796020] NET: Registered protocol family 1
[   26.796045] Using IPI No-Shortcut mode
[   26.796237]   Magic number: 4:897:976
[   26.796265]   hash matches device ttyc3
[   26.796980] Freeing unused kernel memory: 364k freed
[   27.983608] AppArmor: AppArmor initialized<5>audit(1208937542.444:2):  type=1505 info="AppArmor initialized" pid=1201
[   28.059902] fuse init (API version 7.8)
[   28.064540] Failure registering capabilities with primary security module.
[   28.080322] ACPI: Processor [CPU1] (supports 16 throttling states)
[   28.080341] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[   28.080353] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[   28.080364] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[   28.849981] usbcore: registered new interface driver usbfs
[   28.850013] usbcore: registered new interface driver hub
[   28.850036] usbcore: registered new device driver usb
[   28.850934] USB Universal Host Controller Interface driver v3.0
[   28.851030] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 16
[   28.851045] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   28.851245] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[   28.851280] uhci_hcd 0000:00:10.0: irq 16, io base 0x0000dc00
[   28.851412] usb usb1: configuration #1 chosen from 1 choice
[   28.851439] hub 1-0:1.0: USB hub found
[   28.851447] hub 1-0:1.0: 2 ports detected
[   28.899267] SCSI subsystem initialized
[   28.904341] libata version 2.21 loaded.
[   28.918157] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   28.918165] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   28.925605] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[   28.954182] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 16
[   28.954199] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   28.954226] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[   28.954252] uhci_hcd 0000:00:10.1: irq 16, io base 0x0000d880
[   28.954354] usb usb2: configuration #1 chosen from 1 choice
[   28.954380] hub 2-0:1.0: USB hub found
[   28.954388] hub 2-0:1.0: 2 ports detected
[   28.977045] Floppy drive(s): fd0 is 1.44M
[   29.028511] FDC 0 is a post-1991 82077
[   29.057992] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 16
[   29.058009] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   29.058035] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[   29.058062] uhci_hcd 0000:00:10.2: irq 16, io base 0x0000d800
[   29.058158] usb usb3: configuration #1 chosen from 1 choice
[   29.058189] hub 3-0:1.0: USB hub found
[   29.058199] hub 3-0:1.0: 2 ports detected
[   29.161864] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 16
[   29.161880] uhci_hcd 0000:00:10.3: UHCI Host Controller
[   29.161907] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[   29.161932] uhci_hcd 0000:00:10.3: irq 16, io base 0x0000d480
[   29.162030] usb usb4: configuration #1 chosen from 1 choice
[   29.162058] hub 4-0:1.0: USB hub found
[   29.162066] hub 4-0:1.0: 2 ports detected
[   29.267946] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 16
[   29.267970] ehci_hcd 0000:00:10.4: EHCI Host Controller
[   29.268031] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[   29.268086] ehci_hcd 0000:00:10.4: irq 16, io mem 0xff6fdc00
[   29.321575] usb 1-2: new low speed USB device using uhci_hcd and address 2
[   29.321596] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   29.321742] usb usb5: configuration #1 chosen from 1 choice
[   29.321776] hub 5-0:1.0: USB hub found
[   29.321787] hub 5-0:1.0: 8 ports detected
[   29.425644] sata_via 0000:00:0f.0: version 2.2
[   29.425679] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 17
[   29.425734] sata_via 0000:00:0f.0: routed to hard irq line 5
[   29.425834] scsi0 : sata_via
[   29.425885] scsi1 : sata_via
[   29.426089] ata1: SATA max UDMA/133 cmd 0x0001ec00 ctl 0x0001e882 bmdma 0x0001e400 irq 17
[   29.426092] ata2: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e482 bmdma 0x0001e408 irq 17
[   29.629181] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[   29.840933] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[   29.853378] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[   29.853405] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 17
[   29.853418] VP_IDE: chipset revision 6
[   29.853421] VP_IDE: not 100% native mode: will probe irqs later
[   29.853434] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[   29.853442]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[   29.853453]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
[   29.853460] Probing IDE interface ide0...
[   30.268541] hda: ST340810A, ATA DISK drive
[   30.759872] usb 1-2: new low speed USB device using uhci_hcd and address 3
[   30.939702] usb 1-2: configuration #1 chosen from 1 choice
[   30.946724] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   30.949079] Probing IDE interface ide1...
[   31.183377] usb 2-1: new low speed USB device using uhci_hcd and address 2
[   31.361261] usb 2-1: configuration #1 chosen from 1 choice
[   31.378343] usbcore: registered new interface driver hiddev
[   31.392312] input: Logitech Logitech USB Keyboard as /class/input/input1
[   31.392329] input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:10.0-2
[   31.432087] input: Logitech Logitech USB Keyboard as /class/input/input2
[   31.432118] input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:10.0-2
[   31.447290] input: Logitech USB Receiver as /class/input/input3
[   31.447315] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.1-1
[   31.480089] input: Logitech USB Receiver as /class/input/input4
[   31.480142] input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.1-1
[   31.480159] usbcore: registered new interface driver usbhid
[   31.480163] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   31.810747] hdc: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM drive
[   32.593837] hdd: HL-DT-ST GCE-8400B, ATAPI CD/DVD-ROM drive
[   32.656687] ide1 at 0x170-0x177,0x376 on irq 15
[   32.661885] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 18
[   32.666082] eth0: VIA Rhine II at 0x1ee00, 00:19:21:01:05:07, IRQ 18.
[   32.666799] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 4de1.
[   32.673709] hda: max request size: 128KiB
[   32.684428] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[   32.684439] hda: cache flushes not supported
[   32.684506]  hda: hda1 hda2 hda3 < hda5 >
[   32.757051] hdc: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
[   32.757063] Uniform CD-ROM driver Revision: 3.20
[   32.770135] hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
[   33.149821] Attempting manual resume
[   33.149827] swsusp: Resume From Partition 3:5
[   33.149829] PM: Checking swsusp image.
[   33.150025] PM: Resume from disk failed.
[   33.209416] kjournald starting.  Commit interval 5 seconds
[   33.209433] EXT3-fs: mounted filesystem with ordered data mode.
[   44.464398] Linux agpgart interface v0.102 (c) Dave Jones
[   44.503349] agpgart: Detected VIA VT3314 chipset
[   44.508088] agpgart: AGP aperture is 64M @ 0xf8000000
[   44.539563] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   44.546504] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   45.412495] input: PC Speaker as /class/input/input5
[   45.738838] usbcore: registered new interface driver xpad
[   45.738847] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[   46.145239] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19
[   46.145387] PCI: Setting latency timer of device 0000:00:11.5 to 64
[   47.561145] lp: driver loaded but no devices found
[   47.692123] ndiswrapper version 1.48 loaded (smp=yes, preempt=no)
[   47.780973] ndiswrapper: driver bcmwl5 (Linksys,07/17/2003, 3.30.15.0) loaded
[   47.781225] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 20
[   47.786652] ndiswrapper: using IRQ 20
[   48.127548] wlan0: ethernet device 00:0f:66:70:6b:e7 using NDIS driver: bcmwl5, version: 0x50000, NDIS version: 0x500, vendor: '', 14E4:4320.5.conf
[   48.127908] wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
[   48.133727] usbcore: registered new interface driver ndiswrapper
[   48.220184] Adding 803208k swap on /dev/hda5.  Priority:-1 extents:1 across:803208k
[   48.228162] ndiswrapper: changing interface name from 'wlan0' to 'eth0'
[   48.665845] EXT3 FS on hda2, internal journal
[   50.292304] No dock devices found.
[   50.365890] input: Power Button (FF) as /class/input/input6
[   50.370597] ACPI: Power Button (FF) [PWRF]
[   50.397682] input: Sleep Button (CM) as /class/input/input7
[   50.402351] ACPI: Sleep Button (CM) [SLPB]
[   50.429760] input: Power Button (CM) as /class/input/input8
[   50.434417] ACPI: Power Button (CM) [PWRB]
[   52.994137] eth1: link up, 100Mbps, full-duplex, lpa 0x4DE1
[   54.492518] Failure registering capabilities with primary security module.
[   54.756710] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   54.756716] apm: overridden by ACPI.
[   55.691415] [fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
[   55.691701] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0
[   55.963742] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
[   58.019106] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   58.019113] vboxdrv: Successfully done.
[   58.960641] [fglrx] Internal AGP support requested, but kernel AGP support active.
[   58.960649] [fglrx] Have to use kernel AGP support to avoid conflicts.
[   58.960654] [fglrx] AGP detected, AgpState   = 0x07000a1b (hardware caps of chipset)
[   58.961461] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[   58.961694] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[   58.961896] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[   58.962037] [fglrx] AGP enabled,  AgpCommand = 0x07000312 (selected caps)
[   58.970828] [fglrx] total      GART = 67108864
[   58.970838] [fglrx] free       GART = 51113984
[   58.970840] [fglrx] max single GART = 51113984
[   58.970842] [fglrx] total      LFB  = 67108864
[   58.970843] [fglrx] free       LFB  = 49278976
[   58.970845] [fglrx] max single LFB  = 49278976
[   58.970847] [fglrx] total      Inv  = 0
[   58.970848] [fglrx] free       Inv  = 0
[   58.970849] [fglrx] max single Inv  = 0
[   58.970851] [fglrx] total      TIM  = 0
[   59.101441] ppdev: user-space parallel port driver
[   59.737278] audit(1208955575.033:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5635 profile="/usr/sbin/cupsd"
[   63.051240] NET: Registered protocol family 17
[   68.281950] NET: Registered protocol family 10
[   68.282066] lo: Disabled Privacy Extensions
[   68.282213] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   79.235545] eth1: no IPv6 routers present
[ 1343.559229] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1360.472445] eth0: no IPv6 routers present
[ 1493.888206] eth1: no IPv6 routers present
[ 1499.344935] ADDRCONF(NETDEV_UP): eth0: link is not ready