[ 0.000000] Linux version 2.6.22-12-generic (buildd@vernadsky) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23 18:11:30 GMT 2007 (Ubuntu 2.6.22-12.39-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff70000 (usable) [ 0.000000] BIOS-e820: 000000001ff70000 - 000000001ff7e000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ff7e000 - 000000001ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 130928) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 130928 [ 0.000000] HighMem 130928 -> 130928 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 130928 [ 0.000000] On node 0 totalpages: 130928 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 990 pages used for memmap [ 0.000000] Normal zone: 125842 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7450, 0024 (r2 IBM ) [ 0.000000] ACPI: XSDT 1FF73AF2, 0044 (r1 IBM TP-1A 1180 LTP 0) [ 0.000000] ACPI: FACP 1FF73C00, 0081 (r1 IBM TP-1A 1180 IBM 1) [ 0.000000] ACPI: DSDT 1FF73CE7, A1EA (r1 IBM TP-1A 1180 MSFT 100000D) [ 0.000000] ACPI: FACS 1FF7F000, 0040 [ 0.000000] ACPI: SSDT 1FF73CB4, 0033 (r1 IBM TP-1A 1180 MSFT 100000D) [ 0.000000] ACPI: ECDT 1FF7DED1, 0052 (r1 IBM TP-1A 1180 IBM 1) [ 0.000000] ACPI: BOOT 1FF7DFD8, 0028 (r1 IBM TP-1A 1180 LTP 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df800000) [ 0.000000] Built 1 zonelists. Total pages: 129906 [ 0.000000] Kernel command line: root=UUID=53404dc7-481a-4ef0-9b26-53e1bd581957 ro quiet splash [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffd000 (0140d000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1132.400 MHz processor. [ 8.252065] Console: colour VGA+ 80x25 [ 8.252521] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 8.253086] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 8.282870] Memory: 507660k/523712k available (2017k kernel code, 15440k reserved, 918k data, 364k init, 0k highmem) [ 8.282889] virtual kernel memory layout: [ 8.282891] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 8.282894] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 8.282897] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 8.282899] lowmem : 0xc0000000 - 0xdff70000 ( 511 MB) [ 8.282902] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 8.282904] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB) [ 8.282907] .text : 0xc0100000 - 0xc02f8456 (2017 kB) [ 8.282913] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 8.282984] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 8.362987] Calibrating delay using timer specific routine.. 2266.55 BogoMIPS (lpj=4533102) [ 8.363034] Security Framework v1.0.0 initialized [ 8.363050] SELinux: Disabled at boot. [ 8.363078] Mount-cache hash table entries: 512 [ 8.363297] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 8.363316] CPU: L1 I cache: 16K, L1 D cache: 16K [ 8.363321] CPU: L2 cache: 512K [ 8.363326] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 [ 8.363343] Compat vDSO mapped to ffffe000. [ 8.363361] Checking 'hlt' instruction... OK. [ 8.379098] SMP alternatives: switching to UP code [ 8.379309] Freeing SMP alternatives: 11k freed [ 8.379713] Early unpacking initramfs... done [ 8.928011] ACPI: Core revision 20070126 [ 8.928256] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 8.935497] ACPI: setting ELCR to 0200 (from 0800) [ 8.946194] CPU0: Intel(R) Pentium(R) III Mobile CPU 1133MHz stepping 01 [ 8.946206] SMP motherboard not detected. [ 8.946211] Local APIC not detected. Using dummy APIC emulation. [ 8.946289] Brought up 1 CPUs [ 8.946529] Booting paravirtualized kernel on bare hardware [ 8.946618] Time: 0:16:17 Date: 08/25/107 [ 8.946668] NET: Registered protocol family 16 [ 8.946878] EISA bus registered [ 8.946896] ACPI: bus type pci registered [ 8.947201] PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8 [ 8.947206] PCI: Using configuration type 1 [ 8.947210] Setting up standard PCI resources [ 8.952020] ACPI: EC: Found ECDT [ 8.963233] ACPI: Interpreter enabled [ 8.963238] ACPI: (supports S0 S3 S4 S5) [ 8.963267] ACPI: Using PIC for interrupt routing [ 8.974912] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 8.974996] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 8.975008] PCI: Probing PCI hardware (bus 00) [ 8.975341] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 8.975348] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 8.975776] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling [ 8.975834] PCI: Transparent bridge - 0000:00:1e.0 [ 8.975987] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 8.976087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 8.976124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 8.981992] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 8.982316] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 8.982635] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 8.983011] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 8.983332] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 8.983625] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 8.983920] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 8.984214] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 8.984674] ACPI: Power Resource [PUBS] (on) [ 8.984695] Linux Plug and Play Support v0.97 (c) Adam Belay [ 8.984721] pnp: PnP ACPI init [ 8.984738] ACPI: bus type pnp registered [ 8.990269] pnp: PnP ACPI: found 13 devices [ 8.990274] ACPI: ACPI bus type pnp unregistered [ 8.990281] PnPBIOS: Disabled by ACPI PNP [ 8.990380] PCI: Using ACPI for IRQ routing [ 8.990386] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 8.998632] NET: Registered protocol family 8 [ 8.998636] NET: Registered protocol family 20 [ 8.998750] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 8.998756] pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 8.998762] pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 8.998767] pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 8.998815] Time: tsc clocksource has been installed. [ 9.029343] PCI: Bridge: 0000:00:01.0 [ 9.029346] IO window: disabled. [ 9.029352] MEM window: c0100000-c01fffff [ 9.029357] PREFETCH window: e0000000-ebffffff [ 9.029368] PCI: Bus 3, cardbus bridge: 0000:02:00.0 [ 9.029372] IO window: 00003000-000030ff [ 9.029378] IO window: 00003400-000034ff [ 9.029384] PREFETCH window: f0000000-f3ffffff [ 9.029390] MEM window: c4000000-c7ffffff [ 9.029395] PCI: Bus 7, cardbus bridge: 0000:02:00.1 [ 9.029399] IO window: 00003800-000038ff [ 9.029404] IO window: 00003c00-00003cff [ 9.029410] PREFETCH window: f4000000-f7ffffff [ 9.029416] MEM window: c8000000-cbffffff [ 9.029421] PCI: Bridge: 0000:00:1e.0 [ 9.029425] IO window: 3000-7fff [ 9.029432] MEM window: c0200000-cfffffff [ 9.029438] PREFETCH window: ec000000-f7ffffff [ 9.029456] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 9.030086] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 9.030092] PCI: setting IRQ 11 as level-triggered [ 9.030098] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 9.030655] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 9.030659] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 9.030687] NET: Registered protocol family 2 [ 9.066862] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 9.066945] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 9.067367] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 9.067727] TCP: Hash tables configured (established 16384 bind 16384) [ 9.067734] TCP reno registered [ 9.079098] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 [ 9.553796] it is [ 10.121403] Freeing initrd memory: 7061k freed [ 10.121697] Simple Boot Flag at 0x35 set to 0x1 [ 10.122120] audit: initializing netlink socket (disabled) [ 10.122149] audit(1190679377.716:1): initialized [ 10.126200] VFS: Disk quotas dquot_6.5.1 [ 10.126318] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 10.126573] io scheduler noop registered [ 10.126579] io scheduler anticipatory registered [ 10.126583] io scheduler deadline registered [ 10.126620] io scheduler cfq registered (default) [ 10.126694] Boot video device is 0000:01:00.0 [ 10.127066] isapnp: Scanning for PnP cards... [ 10.479969] isapnp: No Plug & Play device found [ 10.529543] Real Time Clock Driver v1.12ac [ 10.529713] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 10.531579] pnp: Device 00:0a activated. [ 10.531843] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 10.532214] PCI: Enabling device 0000:00:1f.6 (0000 -> 0001) [ 10.532228] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 10.532241] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 10.533233] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 10.533598] input: Macintosh mouse button emulation as /class/input/input0 [ 10.533751] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 10.542586] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 10.542596] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 10.542892] mice: PS/2 mouse device common for all mice [ 10.543076] EISA: Probing bus 0 at eisa.0 [ 10.543088] Cannot allocate resource for EISA slot 1 [ 10.543094] Cannot allocate resource for EISA slot 2 [ 10.543099] Cannot allocate resource for EISA slot 3 [ 10.543103] Cannot allocate resource for EISA slot 4 [ 10.543107] Cannot allocate resource for EISA slot 5 [ 10.543111] Cannot allocate resource for EISA slot 6 [ 10.543115] Cannot allocate resource for EISA slot 7 [ 10.543122] EISA: Detected 0 cards. [ 10.543303] TCP cubic registered [ 10.543340] NET: Registered protocol family 1 [ 10.543393] Using IPI No-Shortcut mode [ 10.543695] Magic number: 7:612:254 [ 10.543763] hash matches device ttytd [ 10.543896] hash matches device 0000:00:1d.2 [ 10.544372] Freeing unused kernel memory: 364k freed [ 10.582360] input: AT Translated Set 2 keyboard as /class/input/input1 [ 11.881494] AppArmor: AppArmor initialized<5>audit(1190679379.216:2): type=1505 info="AppArmor initialized" pid=1191 [ 11.892921] fuse init (API version 7.8) [ 11.901568] Failure registering capabilities with primary security module. [ 11.925392] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 11.928547] ACPI: Thermal Zone [THM0] (56 C) [ 12.776530] usbcore: registered new interface driver usbfs [ 12.776573] usbcore: registered new interface driver hub [ 12.776616] usbcore: registered new device driver usb [ 12.779015] USB Universal Host Controller Interface driver v3.0 [ 12.779138] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 12.779157] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 12.779164] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 12.779427] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 12.779459] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 [ 12.779677] usb usb1: configuration #1 chosen from 1 choice [ 12.779726] hub 1-0:1.0: USB hub found [ 12.779737] hub 1-0:1.0: 2 ports detected [ 12.882357] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 12.882366] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 12.882384] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 12.882390] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 12.882437] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 12.882469] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 [ 12.882660] usb usb2: configuration #1 chosen from 1 choice [ 12.882710] hub 2-0:1.0: USB hub found [ 12.882723] hub 2-0:1.0: 2 ports detected [ 12.950146] SCSI subsystem initialized [ 12.966534] libata version 2.21 loaded. [ 12.986307] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 12.986315] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 12.986335] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 12.986360] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 12.986456] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 12.986489] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 [ 12.986680] usb usb3: configuration #1 chosen from 1 choice [ 12.986736] hub 3-0:1.0: USB hub found [ 12.986750] hub 3-0:1.0: 2 ports detected [ 13.078204] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 13.078212] e100: Copyright(c) 1999-2006 Intel Corporation [ 13.165766] ata_piix 0000:00:1f.1: version 2.11 [ 13.165794] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 13.165809] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 13.165870] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 13.166111] scsi0 : ata_piix [ 13.166191] scsi1 : ata_piix [ 13.166959] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14 [ 13.166967] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15 [ 13.242505] Floppy drive(s): fd0 is 1.44M [ 13.307067] FDC 0 is a National Semiconductor PC87306 [ 13.329644] ata1.00: ATA-6: TOSHIBA MK8032GAX, AD001A, max UDMA/100 [ 13.329654] ata1.00: 156301488 sectors, multi 16: LBA48 [ 13.337585] ata1.00: configured for UDMA/100 [ 5.144000] Marking TSC unstable due to: possible TSC halt in C2. [ 5.148000] Time: acpi_pm clocksource has been installed. [ 5.244000] Clocksource tsc unstable (delta = -613454102 ns) [ 5.376000] ata2.00: ATAPI: _NEC DVD_RW ND-6750A, 2.01, max UDMA/33 [ 5.548000] ata2.00: configured for UDMA/33 [ 5.548000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8032GA AD00 PQ: 0 ANSI: 5 [ 5.548000] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-6750A 2.01 PQ: 0 ANSI: 5 [ 5.556000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [ 5.556000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 5.580000] e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC addr 00:D0:59:83:D9:AC [ 5.612000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 5.612000] sd 0:0:0:0: [sda] Write Protect is off [ 5.612000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.612000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.612000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 5.612000] sd 0:0:0:0: [sda] Write Protect is off [ 5.612000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.612000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.612000] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4 [ 5.688000] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.696000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.696000] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.720000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 5.720000] Uniform CD-ROM driver Revision: 3.20 [ 5.720000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 6.180000] Attempting manual resume [ 6.180000] swsusp: Resume From Partition 8:5 [ 6.180000] PM: Checking swsusp image. [ 6.180000] PM: Resume from disk failed. [ 6.236000] kjournald starting. Commit interval 5 seconds [ 6.236000] EXT3-fs: mounted filesystem with ordered data mode. [ 18.056000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.068000] Netfilter messages via NETLINK v0.30. [ 18.092000] nf_conntrack version 0.5.0 (4091 buckets, 32728 max) [ 21.184000] Linux agpgart interface v0.102 (c) Dave Jones [ 21.196000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 21.200000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.260000] agpgart: Detected an Intel 830M Chipset. [ 21.276000] agpgart: AGP aperture is 256M @ 0xd0000000 [ 21.304000] iTCO_vendor_support: vendor-support=0 [ 21.372000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 21.376000] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060) [ 21.376000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 22.072000] intel_rng: FWH not detected [ 22.724000] ieee80211_crypt: registered algorithm 'NULL' [ 22.764000] Yenta: CardBus bridge found at 0000:02:00.0 [1014:023b] [ 22.764000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 22.764000] Yenta: Routing CardBus interrupts to PCI [ 22.764000] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64 [ 22.996000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 [ 22.996000] Socket status: 30000006 [ 22.996000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff [ 22.996000] cs: IO port probe 0x3000-0x7fff: clean. [ 22.996000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 22.996000] pcmcia: parent PCI bridge Memory window: 0xec000000 - 0xf7ffffff [ 22.996000] Yenta: CardBus bridge found at 0000:02:00.1 [1014:023b] [ 22.996000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 22.996000] Yenta: Routing CardBus interrupts to PCI [ 22.996000] Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64 [ 23.228000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 [ 23.228000] Socket status: 30000006 [ 23.228000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff [ 23.228000] cs: IO port probe 0x3000-0x7fff: clean. [ 23.228000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 23.228000] pcmcia: parent PCI bridge Memory window: 0xec000000 - 0xf7ffffff [ 23.480000] hostap_pci: 0.4.4-kernel (Jouni Malinen ) [ 23.480000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 23.480000] hostap_pci: Registered netdevice wifi0 [ 23.480000] wifi0: Original COR value: 0x2 [ 23.660000] input: PC Speaker as /class/input/input2 [ 23.684000] prism2_hw_init: initialized in 200 ms [ 23.684000] wifi0: NIC: id=0x8013 v1.0.0 [ 23.684000] wifi0: PRI: id=0x15 v1.1.0 [ 23.684000] wifi0: STA: id=0x1f v1.7.4 [ 23.796000] wifi0: Intersil Prism2.5 PCI: mem=0xec000000, irq=11 [ 23.796000] wifi0: registered netdevice wlan0 [ 23.832000] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 23.852000] input: TPPS/2 IBM TrackPoint as /class/input/input3 [ 23.856000] irda_init() [ 23.856000] NET: Registered protocol family 23 [ 23.900000] parport_pc 00:0b: reported by Plug and Play ACPI [ 23.900000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 23.996000] pnp: Device 00:0c activated. [ 23.996000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 23.996000] nsc-ircc, chip->init [ 23.996000] nsc-ircc, Found chip at base=0x02e [ 23.996000] nsc-ircc, driver loaded (Dag Brattli) [ 23.996000] IrDA: Registered device irda0 [ 23.996000] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 24.412000] PCI: Enabling device 0000:00:1f.5 (0000 -> 0001) [ 24.412000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 24.412000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 24.500000] cs: IO port probe 0x100-0x3af: clean. [ 24.504000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 24.504000] cs: IO port probe 0x820-0x8ff: clean. [ 24.504000] cs: IO port probe 0xc00-0xcf7: clean. [ 24.504000] cs: IO port probe 0xa00-0xaff: clean. [ 24.512000] cs: IO port probe 0x100-0x3af: clean. [ 24.512000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 24.516000] cs: IO port probe 0x820-0x8ff: clean. [ 24.516000] cs: IO port probe 0xc00-0xcf7: clean. [ 24.516000] cs: IO port probe 0xa00-0xaff: clean. [ 25.656000] intel8x0_measure_ac97_clock: measured 55433 usecs [ 25.656000] intel8x0: clocking to 48000 [ 26.772000] lp0: using parport0 (interrupt-driven). [ 26.876000] Adding 1510068k swap on /dev/sda5. Priority:-1 extents:1 across:1510068k [ 27.444000] EXT3 FS on sda6, internal journal [ 39.352000] kjournald starting. Commit interval 5 seconds [ 39.352000] EXT3 FS on sda1, internal journal [ 39.352000] EXT3-fs: mounted filesystem with ordered data mode. [ 39.388000] kjournald starting. Commit interval 5 seconds [ 39.388000] EXT3 FS on sda3, internal journal [ 39.388000] EXT3-fs: mounted filesystem with ordered data mode. [ 39.408000] kjournald starting. Commit interval 5 seconds [ 39.408000] EXT3 FS on sda7, internal journal [ 39.408000] EXT3-fs: mounted filesystem with ordered data mode. [ 41.164000] ACPI: ACPI Dock Station Driver [ 41.228000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay [ 41.228000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler [ 41.228000] ACPI: Error installing bay notify handler [ 41.228000] ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added [ 41.368000] input: Power Button (FF) as /class/input/input4 [ 41.372000] ACPI: Power Button (FF) [PWRF] [ 41.432000] input: Lid Switch as /class/input/input5 [ 41.432000] ACPI: Lid Switch [LID] [ 41.464000] input: Sleep Button (CM) as /class/input/input6 [ 41.464000] ACPI: Sleep Button (CM) [SLPB] [ 41.608000] ACPI: AC Adapter [AC] (on-line) [ 41.632000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 41.668000] ACPI: Battery Slot [BAT0] (battery present) [ 43.488000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 43.488000] PCI: Setting latency timer of device 0000:00:1f.6 to 64 [ 44.236000] wifi0: LinkStatus=2 (Disconnected) [ 44.236000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 44.612000] NET: Registered protocol family 10 [ 44.612000] lo: Disabled Privacy Extensions [ 44.612000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 44.612000] ADDRCONF(NETDEV_UP): wifi0: link is not ready [ 44.612000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 44.828000] ppdev: user-space parallel port driver [ 44.884000] wifi0: LinkStatus=1 (Connected) [ 44.884000] wifi0: LinkStatus: BSSID=00:14:bf:38:8a:54 [ 44.884000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 44.888000] ADDRCONF(NETDEV_CHANGE): wifi0: link becomes ready [ 45.376000] audit(1190693822.549:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4730 profile="/usr/sbin/cupsd" [ 45.672000] IBM machine detected. Enabling interrupts during APM calls. [ 45.672000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 45.672000] apm: overridden by ACPI. [ 45.888000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 45.888000] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 45.888000] thinkpad_acpi: ThinkPad EC firmware 1AHT23WW-1.06a [ 45.896000] thinkpad_acpi: another device driver is already handling bay events [ 45.896000] thinkpad_acpi: disabling subdriver bay [ 45.976000] Non-volatile memory driver v1.2 [ 46.068000] input: /usr/sbin/thinkpad-keys as /class/input/input7 [ 47.404000] Failure registering capabilities with primary security module. [ 47.712000] Bluetooth: Core ver 2.11 [ 47.712000] NET: Registered protocol family 31 [ 47.712000] Bluetooth: HCI device and connection manager initialized [ 47.712000] Bluetooth: HCI socket layer initialized [ 47.752000] Bluetooth: L2CAP ver 2.8 [ 47.752000] Bluetooth: L2CAP socket layer initialized [ 47.848000] Bluetooth: RFCOMM socket layer initialized [ 47.848000] Bluetooth: RFCOMM TTY layer initialized [ 47.848000] Bluetooth: RFCOMM ver 1.8 [ 50.980000] [drm] Initialized drm 1.1.0 20060810 [ 51.028000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 51.032000] [drm] Initialized savage 2.4.1 20050313 on minor 0 [ 51.032000] mtrr: base(0xe4000000) is not aligned on a size(0x5000000) boundary [ 51.032000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 51.032000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode [ 51.032000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [ 55.764000] wlan0: no IPv6 routers present [ 91.380000] NET: Registered protocol family 17 [ 91.408000] wifi0: LinkStatus=2 (Disconnected) [ 91.408000] wifi0: LinkStatus: BSSID=00:14:bf:38:8a:54 [ 92.216000] wifi0: LinkStatus=2 (Disconnected) [ 92.216000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 92.240000] wifi0: LinkStatus=2 (Disconnected) [ 92.240000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 92.260000] wifi0: LinkStatus=2 (Disconnected) [ 92.260000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 92.276000] wlan0: Trying to join BSSID 00:14:bf:38:8a:54 [ 92.300000] wifi0: LinkStatus=1 (Connected) [ 92.300000] wifi0: LinkStatus: BSSID=00:14:bf:38:8a:54 [ 107.128000] wlan0: no IPv6 routers present [ 695.348000] wlan0: manual reset request(2) [ 695.360000] wifi0: LinkStatus=2 (Disconnected) [ 695.360000] wifi0: LinkStatus: BSSID=00:14:bf:38:8a:54 [ 697.228000] ACPI: PCI interrupt for device 0000:02:08.0 disabled [ 697.260000] wifi0: Original COR value: 0x31 [ 697.328000] ACPI: PCI interrupt for device 0000:02:02.0 disabled [ 697.328000] hostap_pci: Driver unloaded [ 697.336000] ieee80211_crypt: unregistered algorithm 'NULL' [ 700.992000] PM: Preparing system for mem sleep [ 700.992000] Stopping tasks ... [ 720.996000] Stopping user space processes timed out after 20 seconds (1 tasks refusing to freeze): [ 720.996000] helios [ 720.996000] Restarting tasks ... done. [ 721.924000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 721.924000] e100: Copyright(c) 1999-2006 Intel Corporation [ 721.928000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 721.992000] e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC addr 00:D0:59:83:D9:AC [ 722.028000] ieee80211_crypt: registered algorithm 'NULL' [ 722.072000] hostap_pci: 0.4.4-kernel (Jouni Malinen ) [ 722.072000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 722.112000] hostap_pci: Registered netdevice wifi0 [ 722.112000] wifi0: Original COR value: 0x0 [ 722.312000] prism2_hw_init: initialized in 196 ms [ 722.316000] wifi0: NIC: id=0x8013 v1.0.0 [ 722.316000] wifi0: PRI: id=0x15 v1.1.0 [ 722.316000] wifi0: STA: id=0x1f v1.7.4 [ 722.324000] wifi0: Intersil Prism2.5 PCI: mem=0xec000000, irq=11 [ 722.364000] wifi0: registered netdevice wlan0 [ 724.588000] input: Power Button (FF) as /class/input/input8 [ 724.588000] ACPI: Power Button (FF) [PWRF] [ 724.604000] input: Lid Switch as /class/input/input9 [ 724.604000] ACPI: Lid Switch [LID] [ 724.612000] input: Sleep Button (CM) as /class/input/input10 [ 724.612000] ACPI: Sleep Button (CM) [SLPB] [ 725.716000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 725.720000] ACPI: Thermal Zone [THM0] (65 C) [ 725.948000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 725.948000] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 725.948000] thinkpad_acpi: ThinkPad EC firmware 1AHT23WW-1.06a [ 725.956000] thinkpad_acpi: another device driver is already handling bay events [ 725.956000] thinkpad_acpi: disabling subdriver bay [ 726.248000] ACPI: AC Adapter [AC] (on-line) [ 726.356000] ACPI: Battery Slot [BAT0] (battery present) [ 727.264000] wifi0: hfa384x_cmd: interrupted; err=-4 [ 727.264000] wifi0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=-4, rid=fc48, len=2) [ 727.320000] ADDRCONF(NETDEV_UP): wifi0: link is not ready [ 727.320000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 727.996000] wifi0: LinkStatus=1 (Connected) [ 727.996000] wifi0: LinkStatus: BSSID=00:14:bf:38:8a:54 [ 727.996000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 727.996000] ADDRCONF(NETDEV_CHANGE): wifi0: link becomes ready [ 728.316000] wlan0: Preferred AP (SIOCSIWAP) is used only in Managed mode when host_roaming is enabled [ 728.456000] wifi0: TXEXC - status=0x0004 ([Discon]) tx_control=000c [ 728.456000] retry_count=0 tx_rate=0 fc=0x0108 (Data::0 ToDS) [ 728.456000] A1=00:14:bf:38:8a:54 A2=00:20:e0:89:f1:47 A3=33:33:00:00:00:16 A4=00:00:00:00:00:00 [ 728.484000] wifi0: LinkStatus=2 (Disconnected) [ 728.484000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 728.640000] wifi0: hfa384x_cmd: interrupted; err=-4 [ 728.640000] wifi0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=-4, rid=fc48, len=2) [ 728.652000] wifi0: LinkStatus=2 (Disconnected) [ 728.652000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 728.692000] wifi0: LinkStatus=2 (Disconnected) [ 728.692000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 728.780000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 728.876000] ADDRCONF(NETDEV_UP): wifi0: link is not ready [ 728.876000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 728.956000] wifi0: LinkStatus=2 (Disconnected) [ 728.956000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 729.072000] wifi0: LinkStatus=2 (Disconnected) [ 729.072000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 729.688000] wlan0: Preferred AP (SIOCSIWAP) is used only in Managed mode when host_roaming is enabled [ 758.904000] ADDRCONF(NETDEV_UP): wifi0: link is not ready [ 758.904000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 759.580000] wifi0: LinkStatus=1 (Connected) [ 759.580000] wifi0: LinkStatus: BSSID=00:14:bf:38:8a:54 [ 759.580000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 759.580000] ADDRCONF(NETDEV_CHANGE): wifi0: link becomes ready [ 770.056000] wifi0: LinkStatus=2 (Disconnected) [ 770.060000] wifi0: LinkStatus: BSSID=00:14:bf:38:8a:54 [ 770.132000] wlan0: no IPv6 routers present [ 770.916000] wifi0: LinkStatus=2 (Disconnected) [ 770.916000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 770.940000] wifi0: LinkStatus=2 (Disconnected) [ 770.940000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 770.964000] wifi0: LinkStatus=2 (Disconnected) [ 770.964000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 770.976000] wlan0: Trying to join BSSID 00:14:bf:38:8a:54 [ 771.000000] wifi0: LinkStatus=1 (Connected) [ 771.000000] wifi0: LinkStatus: BSSID=00:14:bf:38:8a:54 [ 785.376000] wlan0: no IPv6 routers present [ 900.840000] ACPI: PCI interrupt for device 0000:02:08.0 disabled [ 900.876000] wifi0: Original COR value: 0x0 [ 900.948000] ACPI: PCI interrupt for device 0000:02:02.0 disabled [ 900.952000] hostap_pci: Driver unloaded [ 900.956000] ieee80211_crypt: unregistered algorithm 'NULL' [ 903.312000] PM: Preparing system for mem sleep [ 903.312000] Stopping tasks ... done. [ 903.320000] Suspending console(s) [ 903.320000] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 903.384000] sd 0:0:0:0: [sda] Stopping disk [ 903.812000] usb_device usbdev3.1: PM: suspend 0->2, parent usb3 already 2 [ 903.812000] usb_endpoint usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2 [ 903.812000] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2 [ 903.812000] usb_endpoint usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2 [ 903.812000] usb_device usbdev2.1: PM: suspend 0->2, parent usb2 already 2 [ 903.812000] usb_endpoint usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2 [ 903.812000] hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2 [ 903.812000] usb_endpoint usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2 [ 903.812000] usb_device usbdev1.1: PM: suspend 0->2, parent usb1 already 2 [ 903.812000] usb_endpoint usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2 [ 903.812000] hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2 [ 903.812000] usb_endpoint usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2 [ 904.484000] pnp: Device 00:0c disabled. [ 904.484000] pnp: Device 00:0b disabled. [ 904.484000] pnp: Device 00:0a disabled. [ 904.484000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 904.484000] ACPI: PCI interrupt for device 0000:00:1f.5 disabled [ 904.484000] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 904.484000] pci_set_power_state(): 0000:00:1f.1: state=3, current state=5 [ 904.484000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 904.484000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 904.484000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 906.228000] Disabling non-boot CPUs ... [ 906.228000] PM: Entering mem sleep [ 906.228000] Back to C! [ 906.228000] PM: Finishing wakeup. [ 906.228000] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2a000f0, writing 22a000f0) [ 906.228000] PCI: Enabling device 0000:00:1d.0 (0000 -> 0001) [ 906.228000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 906.228000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 906.228000] PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b) [ 906.228000] PM: Writing back config space on device 0000:00:1d.0 at offset 8 (was 1, writing 1801) [ 906.228000] usb usb1: root hub lost power or was reset [ 906.228000] PCI: Enabling device 0000:00:1d.1 (0000 -> 0001) [ 906.228000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 906.228000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 906.228000] PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b) [ 906.228000] PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing 1821) [ 906.228000] usb usb2: root hub lost power or was reset [ 906.228000] PCI: Enabling device 0000:00:1d.2 (0000 -> 0001) [ 906.228000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 906.228000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 906.228000] PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b) [ 906.228000] PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing 1841) [ 906.228000] usb usb3: root hub lost power or was reset [ 906.228000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 906.228000] PM: Writing back config space on device 0000:00:1f.1 at offset 9 (was 0, writing 30000000) [ 906.228000] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2800007) [ 906.228000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 906.228000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 906.228000] PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2800000, writing 2800001) [ 906.228000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 906.228000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 906.988000] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 failed (Emask=0x1 Stat=0x51 Err=0x04) [ 906.988000] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 failed (Emask=0x1 Stat=0x51 Err=0x04) [ 906.988000] ata2.00: revalidation failed (errno=-5) [ 906.988000] ata2: failed to recover some devices, retrying in 5 secs [ 907.240000] PM: Writing back config space on device 0000:00:1f.6 at offset 1 (was 2800000, writing 2800001) [ 907.240000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 907.240000] PCI: Setting latency timer of device 0000:00:1f.6 to 64 [ 907.808000] ata1.00: configured for UDMA/100 [ 907.808000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 907.808000] sd 0:0:0:0: [sda] Write Protect is off [ 907.808000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 907.808000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 908.244000] PM: Writing back config space on device 0000:01:00.0 at offset 7 (was 8, writing e0000008) [ 908.244000] PM: Writing back config space on device 0000:01:00.0 at offset 6 (was 8, writing e4000008) [ 908.244000] PM: Writing back config space on device 0000:01:00.0 at offset 5 (was 8, writing e8000008) [ 908.244000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 908.244000] PM: Writing back config space on device 0000:02:02.0 at offset 1 (was 2900117, writing 2900113) [ 908.244000] PM: Writing back config space on device 0000:02:08.0 at offset f (was 38080100, writing 3808010b) [ 908.244000] PM: Writing back config space on device 0000:02:08.0 at offset 5 (was 1, writing 7001) [ 908.244000] PM: Writing back config space on device 0000:02:08.0 at offset 4 (was 0, writing c0200000) [ 908.244000] PM: Writing back config space on device 0000:02:08.0 at offset 3 (was 0, writing 4208) [ 908.244000] PM: Writing back config space on device 0000:02:08.0 at offset 1 (was 2900000, writing 2900113) [ 908.244000] pnp: Device 00:0a activated. [ 908.244000] pnp: Device 00:0b activated. [ 908.248000] pnp: Device 00:0c activated. [ 908.604000] sd 0:0:0:0: [sda] Starting disk [ 908.612000] Restarting tasks ... done. [ 909.040000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 909.040000] e100: Copyright(c) 1999-2006 Intel Corporation [ 909.044000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 909.092000] e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC addr 00:D0:59:83:D9:AC [ 909.120000] ieee80211_crypt: registered algorithm 'NULL' [ 909.140000] hostap_pci: 0.4.4-kernel (Jouni Malinen ) [ 909.144000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 909.148000] hostap_pci: Registered netdevice wifi0 [ 909.148000] wifi0: Original COR value: 0x0 [ 909.344000] prism2_hw_init: initialized in 192 ms [ 909.348000] wifi0: NIC: id=0x8013 v1.0.0 [ 909.348000] wifi0: PRI: id=0x15 v1.1.0 [ 909.348000] wifi0: STA: id=0x1f v1.7.4 [ 909.352000] wifi0: Intersil Prism2.5 PCI: mem=0xec000000, irq=11 [ 909.380000] wifi0: registered netdevice wlan0 [ 911.056000] input: Power Button (FF) as /class/input/input11 [ 911.056000] ACPI: Power Button (FF) [PWRF] [ 911.080000] input: Lid Switch as /class/input/input12 [ 911.080000] ACPI: Lid Switch [LID] [ 911.092000] input: Sleep Button (CM) as /class/input/input13 [ 911.092000] ACPI: Sleep Button (CM) [SLPB] [ 912.312000] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 failed (Emask=0x1 Stat=0x51 Err=0x04) [ 912.312000] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 failed (Emask=0x1 Stat=0x51 Err=0x04) [ 912.312000] ata2.00: ACPI on devcfg failed the second time, disabling (errno=-5) [ 912.312000] ata2.00: revalidation failed (errno=1) [ 912.312000] ata2: failed to recover some devices, retrying in 5 secs [ 912.700000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 912.712000] ACPI: Thermal Zone [THM0] (56 C) [ 912.780000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 912.780000] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 912.780000] thinkpad_acpi: ThinkPad EC firmware 1AHT23WW-1.06a [ 912.796000] thinkpad_acpi: another device driver is already handling bay events [ 912.796000] thinkpad_acpi: disabling subdriver bay [ 912.928000] ACPI: AC Adapter [AC] (on-line) [ 912.976000] ACPI: Battery Slot [BAT0] (battery present) [ 917.808000] ata2.00: configured for UDMA/33 [ 918.208000] wifi0: hfa384x_cmd: interrupted; err=-4 [ 918.208000] wifi0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=-4, rid=fc48, len=2) [ 918.244000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 918.336000] ADDRCONF(NETDEV_UP): wifi0: link is not ready [ 918.336000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 918.420000] wifi0: LinkStatus=2 (Disconnected) [ 918.420000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 919.160000] wifi0: LinkStatus=1 (Connected) [ 919.160000] wifi0: LinkStatus: BSSID=00:14:bf:38:8a:54 [ 919.160000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 919.160000] ADDRCONF(NETDEV_CHANGE): wifi0: link becomes ready [ 919.208000] wlan0: Preferred AP (SIOCSIWAP) is used only in Managed mode when host_roaming is enabled [ 927.828000] ACPI: PCI interrupt for device 0000:02:08.0 disabled [ 927.860000] wifi0: Original COR value: 0x0 [ 930.152000] wifi0: hfa384x_cmd: entry still in list? (entry=d37dbdc0, type=0, res=0) [ 930.152000] wifi0: hfa384x_cmd: command was not completed (res=0, entry=d37dbdc0, type=0, cmd=0x0021, param0=0xfdc6, EVSTAT=8010 INTEN=0000) [ 930.152000] wifi0: interrupt delivery does not seem to work [ 930.152000] wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12) [ 932.152000] wifi0: hfa384x_cmd: entry still in list? (entry=dff015c0, type=0, res=0) [ 932.152000] wifi0: hfa384x_cmd: command was not completed (res=0, entry=dff015c0, type=0, cmd=0x0021, param0=0xfdc6, EVSTAT=8010 INTEN=0000) [ 932.152000] wifi0: interrupt delivery does not seem to work [ 932.152000] wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12) [ 932.164000] wifi0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec [ 932.164000] wifi0: hfa384x_cmd_issue - timeout - reg=0x8021 [ 932.164000] wifi0: hfa384x_cmd: entry still in list? (entry=d7d48cc0, type=0, res=-1) [ 932.164000] wifi0: hfa384x_cmd: interrupted; err=-110 [ 932.164000] wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12) [ 932.196000] ACPI: PCI interrupt for device 0000:02:02.0 disabled [ 932.196000] hostap_pci: Driver unloaded [ 932.200000] ieee80211_crypt: unregistered algorithm 'NULL' [ 934.628000] PM: Preparing system for mem sleep [ 934.628000] Stopping tasks ... done. [ 934.640000] Suspending console(s) [ 934.640000] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 934.912000] sd 0:0:0:0: [sda] Stopping disk [ 935.296000] usb_device usbdev3.1: PM: suspend 0->2, parent usb3 already 2 [ 935.296000] usb_endpoint usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2 [ 935.296000] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2 [ 935.296000] usb_endpoint usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2 [ 935.296000] usb_device usbdev2.1: PM: suspend 0->2, parent usb2 already 2 [ 935.296000] usb_endpoint usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2 [ 935.296000] hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2 [ 935.296000] usb_endpoint usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2 [ 935.296000] usb_device usbdev1.1: PM: suspend 0->2, parent usb1 already 2 [ 935.296000] usb_endpoint usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2 [ 935.296000] hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2 [ 935.296000] usb_endpoint usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2 [ 935.972000] pnp: Device 00:0c disabled. [ 935.972000] pnp: Device 00:0b disabled. [ 935.972000] pnp: Device 00:0a disabled. [ 935.972000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 935.972000] ACPI: PCI interrupt for device 0000:00:1f.5 disabled [ 935.972000] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 935.972000] pci_set_power_state(): 0000:00:1f.1: state=3, current state=5 [ 935.972000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 935.972000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 935.972000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 937.716000] Disabling non-boot CPUs ... [ 937.716000] PM: Entering mem sleep [ 937.716000] Back to C! [ 937.716000] PM: Finishing wakeup. [ 937.716000] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2a000f0, writing 22a000f0) [ 937.716000] PCI: Enabling device 0000:00:1d.0 (0000 -> 0001) [ 937.716000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 937.716000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 937.716000] PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b) [ 937.716000] PM: Writing back config space on device 0000:00:1d.0 at offset 8 (was 1, writing 1801) [ 937.716000] usb usb1: root hub lost power or was reset [ 937.716000] PCI: Enabling device 0000:00:1d.1 (0000 -> 0001) [ 937.716000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 937.716000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 937.716000] PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b) [ 937.716000] PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing 1821) [ 937.716000] usb usb2: root hub lost power or was reset [ 937.716000] PCI: Enabling device 0000:00:1d.2 (0000 -> 0001) [ 937.716000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 937.716000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 937.716000] PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b) [ 937.716000] PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing 1841) [ 937.716000] usb usb3: root hub lost power or was reset [ 937.716000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 937.716000] PM: Writing back config space on device 0000:00:1f.1 at offset 9 (was 0, writing 30000000) [ 937.716000] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2800007) [ 937.716000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 937.716000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 937.716000] PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2800000, writing 2800001) [ 937.716000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 937.716000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 938.464000] ata2.00: configured for UDMA/33 [ 938.728000] PM: Writing back config space on device 0000:00:1f.6 at offset 1 (was 2800000, writing 2800001) [ 938.728000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 938.728000] PCI: Setting latency timer of device 0000:00:1f.6 to 64 [ 939.296000] ata1.00: configured for UDMA/100 [ 939.296000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 939.296000] sd 0:0:0:0: [sda] Write Protect is off [ 939.296000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 939.296000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 939.732000] PM: Writing back config space on device 0000:01:00.0 at offset 7 (was 8, writing e0000008) [ 939.732000] PM: Writing back config space on device 0000:01:00.0 at offset 6 (was 8, writing e4000008) [ 939.732000] PM: Writing back config space on device 0000:01:00.0 at offset 5 (was 8, writing e8000008) [ 939.732000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 939.732000] PM: Writing back config space on device 0000:02:02.0 at offset 1 (was 2900117, writing 2900113) [ 939.732000] PM: Writing back config space on device 0000:02:08.0 at offset f (was 38080100, writing 3808010b) [ 939.732000] PM: Writing back config space on device 0000:02:08.0 at offset 5 (was 1, writing 7001) [ 939.732000] PM: Writing back config space on device 0000:02:08.0 at offset 4 (was 0, writing c0200000) [ 939.732000] PM: Writing back config space on device 0000:02:08.0 at offset 3 (was 0, writing 4208) [ 939.732000] PM: Writing back config space on device 0000:02:08.0 at offset 1 (was 2900000, writing 2900113) [ 939.732000] pnp: Device 00:0a activated. [ 939.732000] pnp: Device 00:0b activated. [ 939.736000] pnp: Device 00:0c activated. [ 940.084000] sd 0:0:0:0: [sda] Starting disk [ 940.092000] Restarting tasks ... done. [ 940.460000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 940.460000] e100: Copyright(c) 1999-2006 Intel Corporation [ 940.468000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 940.528000] e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC addr 00:D0:59:83:D9:AC [ 940.612000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 940.620000] ieee80211_crypt: registered algorithm 'NULL' [ 940.644000] hostap_pci: 0.4.4-kernel (Jouni Malinen ) [ 940.648000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 940.672000] hostap_pci: Registered netdevice wifi0 [ 940.672000] wifi0: Original COR value: 0x0 [ 940.872000] prism2_hw_init: initialized in 196 ms [ 940.876000] wifi0: NIC: id=0x8013 v1.0.0 [ 940.876000] wifi0: PRI: id=0x15 v1.1.0 [ 940.876000] wifi0: STA: id=0x1f v1.7.4 [ 940.880000] wifi0: Intersil Prism2.5 PCI: mem=0xec000000, irq=11 [ 940.928000] wifi0: registered netdevice wlan0 [ 941.012000] ADDRCONF(NETDEV_UP): wifi0: link is not ready [ 941.012000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 941.088000] wifi0: LinkStatus=2 (Disconnected) [ 941.088000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 941.776000] wifi0: LinkStatus=1 (Connected) [ 941.776000] wifi0: LinkStatus: BSSID=00:14:bf:38:8a:54 [ 941.776000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 941.776000] ADDRCONF(NETDEV_CHANGE): wifi0: link becomes ready [ 942.980000] input: Power Button (FF) as /class/input/input14 [ 942.980000] ACPI: Power Button (FF) [PWRF] [ 943.008000] input: Lid Switch as /class/input/input15 [ 943.008000] ACPI: Lid Switch [LID] [ 943.020000] input: Sleep Button (CM) as /class/input/input16 [ 943.020000] ACPI: Sleep Button (CM) [SLPB] [ 944.156000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 944.164000] ACPI: Thermal Zone [THM0] (58 C) [ 944.276000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 944.276000] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 944.276000] thinkpad_acpi: ThinkPad EC firmware 1AHT23WW-1.06a [ 944.284000] thinkpad_acpi: another device driver is already handling bay events [ 944.284000] thinkpad_acpi: disabling subdriver bay [ 944.408000] ACPI: AC Adapter [AC] (on-line) [ 944.456000] ACPI: Battery Slot [BAT0] (battery present) [ 952.196000] wlan0: no IPv6 routers present [ 981.540000] ACPI: PCI interrupt for device 0000:02:08.0 disabled [ 981.572000] wifi0: Original COR value: 0x2 [ 981.644000] ACPI: PCI interrupt for device 0000:02:02.0 disabled [ 981.648000] hostap_pci: Driver unloaded [ 981.656000] ieee80211_crypt: unregistered algorithm 'NULL' [ 984.448000] PM: Preparing system for mem sleep [ 984.448000] Stopping tasks ... done. [ 984.464000] Suspending console(s) [ 984.464000] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 984.668000] sd 0:0:0:0: [sda] Stopping disk [ 985.080000] usb_device usbdev3.1: PM: suspend 0->2, parent usb3 already 2 [ 985.080000] usb_endpoint usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2 [ 985.080000] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2 [ 985.080000] usb_endpoint usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2 [ 985.080000] usb_device usbdev2.1: PM: suspend 0->2, parent usb2 already 2 [ 985.080000] usb_endpoint usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2 [ 985.080000] hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2 [ 985.080000] usb_endpoint usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2 [ 985.080000] usb_device usbdev1.1: PM: suspend 0->2, parent usb1 already 2 [ 985.080000] usb_endpoint usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2 [ 985.080000] hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2 [ 985.080000] usb_endpoint usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2 [ 985.752000] pnp: Device 00:0c disabled. [ 985.752000] pnp: Device 00:0b disabled. [ 985.752000] pnp: Device 00:0a disabled. [ 985.752000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 985.752000] ACPI: PCI interrupt for device 0000:00:1f.5 disabled [ 985.752000] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 985.752000] pci_set_power_state(): 0000:00:1f.1: state=3, current state=5 [ 985.752000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 985.752000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 985.752000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 987.496000] Disabling non-boot CPUs ... [ 987.496000] PM: Entering mem sleep [ 987.496000] Back to C! [ 987.496000] PM: Finishing wakeup. [ 987.496000] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2a000f0, writing 22a000f0) [ 987.496000] PCI: Enabling device 0000:00:1d.0 (0000 -> 0001) [ 987.496000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 987.496000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 987.496000] PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b) [ 987.496000] PM: Writing back config space on device 0000:00:1d.0 at offset 8 (was 1, writing 1801) [ 987.496000] usb usb1: root hub lost power or was reset [ 987.496000] PCI: Enabling device 0000:00:1d.1 (0000 -> 0001) [ 987.496000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 987.496000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 987.496000] PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b) [ 987.496000] PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing 1821) [ 987.496000] usb usb2: root hub lost power or was reset [ 987.496000] PCI: Enabling device 0000:00:1d.2 (0000 -> 0001) [ 987.496000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 987.496000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 987.496000] PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b) [ 987.496000] PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing 1841) [ 987.496000] usb usb3: root hub lost power or was reset [ 987.496000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 987.496000] PM: Writing back config space on device 0000:00:1f.1 at offset 9 (was 0, writing 30000000) [ 987.496000] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2800007) [ 987.496000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 987.496000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 987.496000] PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2800000, writing 2800001) [ 987.496000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 987.496000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 988.172000] ata2.00: configured for UDMA/33 [ 988.508000] PM: Writing back config space on device 0000:00:1f.6 at offset 1 (was 2800000, writing 2800001) [ 988.508000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 988.508000] PCI: Setting latency timer of device 0000:00:1f.6 to 64 [ 988.852000] ata1.00: configured for UDMA/100 [ 988.852000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 988.852000] sd 0:0:0:0: [sda] Write Protect is off [ 988.852000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 988.852000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 989.512000] PM: Writing back config space on device 0000:01:00.0 at offset 7 (was 8, writing e0000008) [ 989.512000] PM: Writing back config space on device 0000:01:00.0 at offset 6 (was 8, writing e4000008) [ 989.512000] PM: Writing back config space on device 0000:01:00.0 at offset 5 (was 8, writing e8000008) [ 989.512000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 989.512000] PM: Writing back config space on device 0000:02:02.0 at offset 1 (was 2900117, writing 2900113) [ 989.512000] PM: Writing back config space on device 0000:02:08.0 at offset f (was 38080100, writing 3808010b) [ 989.512000] PM: Writing back config space on device 0000:02:08.0 at offset 5 (was 1, writing 7001) [ 989.512000] PM: Writing back config space on device 0000:02:08.0 at offset 4 (was 0, writing c0200000) [ 989.512000] PM: Writing back config space on device 0000:02:08.0 at offset 3 (was 0, writing 4208) [ 989.512000] PM: Writing back config space on device 0000:02:08.0 at offset 1 (was 2900000, writing 2900113) [ 989.512000] pnp: Device 00:0a activated. [ 989.512000] pnp: Device 00:0b activated. [ 989.516000] pnp: Device 00:0c activated. [ 989.852000] sd 0:0:0:0: [sda] Starting disk [ 989.860000] Restarting tasks ... done. [ 990.736000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 990.736000] e100: Copyright(c) 1999-2006 Intel Corporation [ 990.740000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 990.792000] e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC addr 00:D0:59:83:D9:AC [ 990.820000] ieee80211_crypt: registered algorithm 'NULL' [ 990.844000] hostap_pci: 0.4.4-kernel (Jouni Malinen ) [ 990.848000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 990.880000] hostap_pci: Registered netdevice wifi0 [ 990.880000] wifi0: Original COR value: 0x0 [ 991.088000] prism2_hw_init: initialized in 204 ms [ 991.088000] wifi0: NIC: id=0x8013 v1.0.0 [ 991.088000] wifi0: PRI: id=0x15 v1.1.0 [ 991.088000] wifi0: STA: id=0x1f v1.7.4 [ 991.092000] wifi0: Intersil Prism2.5 PCI: mem=0xec000000, irq=11 [ 991.120000] wifi0: registered netdevice wlan0 [ 992.488000] input: Power Button (FF) as /class/input/input17 [ 992.488000] ACPI: Power Button (FF) [PWRF] [ 992.512000] input: Lid Switch as /class/input/input18 [ 992.512000] ACPI: Lid Switch [LID] [ 992.524000] input: Sleep Button (CM) as /class/input/input19 [ 992.524000] ACPI: Sleep Button (CM) [SLPB] [ 994.032000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 994.044000] ACPI: Thermal Zone [THM0] (61 C) [ 994.116000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 994.116000] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 994.116000] thinkpad_acpi: ThinkPad EC firmware 1AHT23WW-1.06a [ 994.128000] thinkpad_acpi: another device driver is already handling bay events [ 994.128000] thinkpad_acpi: disabling subdriver bay [ 994.244000] ACPI: AC Adapter [AC] (on-line) [ 994.296000] ACPI: Battery Slot [BAT0] (battery present)