[ 0.000000] Linux version 2.6.22-12-generic (buildd@palmer) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sat Sep 22 18:14:28 GMT 2007 (Ubuntu 2.6.22-12.38-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff70000 (usable) [ 0.000000] BIOS-e820: 000000001ff70000 - 000000001ff7e000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ff7e000 - 000000001ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 130928) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 130928 [ 0.000000] HighMem 130928 -> 130928 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 130928 [ 0.000000] On node 0 totalpages: 130928 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 990 pages used for memmap [ 0.000000] Normal zone: 125842 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7450, 0024 (r2 IBM ) [ 0.000000] ACPI: XSDT 1FF73AF2, 0044 (r1 IBM TP-1A 1200 LTP 0) [ 0.000000] ACPI: FACP 1FF73C00, 0081 (r1 IBM TP-1A 1200 IBM 1) [ 0.000000] ACPI: DSDT 1FF73CE7, A1EA (r1 IBM TP-1A 1200 MSFT 100000D) [ 0.000000] ACPI: FACS 1FF7F000, 0040 [ 0.000000] ACPI: SSDT 1FF73CB4, 0033 (r1 IBM TP-1A 1200 MSFT 100000D) [ 0.000000] ACPI: ECDT 1FF7DED1, 0052 (r1 IBM TP-1A 1200 IBM 1) [ 0.000000] ACPI: BOOT 1FF7DFD8, 0028 (r1 IBM TP-1A 1200 LTP 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df800000) [ 0.000000] Built 1 zonelists. Total pages: 129906 [ 0.000000] Kernel command line: root=UUID=27de56ae-5bd2-4f4f-ac29-4e1f1cb9b326 ro quiet splash [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffd000 (0140d000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1132.420 MHz processor. [ 4.795841] Console: colour VGA+ 80x25 [ 4.796280] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 4.796842] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 4.826657] Memory: 507788k/523712k available (2017k kernel code, 15396k reserved, 918k data, 364k init, 0k highmem) [ 4.826676] virtual kernel memory layout: [ 4.826678] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 4.826681] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 4.826684] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 4.826686] lowmem : 0xc0000000 - 0xdff70000 ( 511 MB) [ 4.826689] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 4.826691] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB) [ 4.826694] .text : 0xc0100000 - 0xc02f8456 (2017 kB) [ 4.826700] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 4.826771] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 4.906775] Calibrating delay using timer specific routine.. 2266.55 BogoMIPS (lpj=4533117) [ 4.906821] Security Framework v1.0.0 initialized [ 4.906837] SELinux: Disabled at boot. [ 4.906865] Mount-cache hash table entries: 512 [ 4.907084] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.907103] CPU: L1 I cache: 16K, L1 D cache: 16K [ 4.907108] CPU: L2 cache: 512K [ 4.907113] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 [ 4.907130] Compat vDSO mapped to ffffe000. [ 4.907149] Checking 'hlt' instruction... OK. [ 4.922886] SMP alternatives: switching to UP code [ 4.923096] Freeing SMP alternatives: 11k freed [ 4.923502] Early unpacking initramfs... done [ 5.470062] ACPI: Core revision 20070126 [ 5.470327] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 5.477403] ACPI: setting ELCR to 0200 (from 0800) [ 5.502296] CPU0: Intel Mobile Intel(R) Pentium(R) III CPU - M 1133MHz stepping 04 [ 5.502308] SMP motherboard not detected. [ 5.502313] Local APIC not detected. Using dummy APIC emulation. [ 5.502392] Brought up 1 CPUs [ 5.502652] Booting paravirtualized kernel on bare hardware [ 5.502746] Time: 12:53:34 Date: 08/23/107 [ 5.502800] NET: Registered protocol family 16 [ 5.502994] EISA bus registered [ 5.503013] ACPI: bus type pci registered [ 5.503322] PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8 [ 5.503327] PCI: Using configuration type 1 [ 5.503331] Setting up standard PCI resources [ 5.508159] ACPI: EC: Found ECDT [ 5.519298] ACPI: Interpreter enabled [ 5.519303] ACPI: (supports S0 S3 S4 S5) [ 5.519333] ACPI: Using PIC for interrupt routing [ 5.530879] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 5.530962] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 5.530973] PCI: Probing PCI hardware (bus 00) [ 5.531308] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 5.531316] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 5.531710] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling [ 5.531769] PCI: Transparent bridge - 0000:00:1e.0 [ 5.531922] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 5.532020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 5.532058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 5.537772] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 5.538097] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 5.538417] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 5.538793] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 5.539115] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 5.539407] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 5.539702] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 5.539997] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 5.540463] ACPI: Power Resource [PUBS] (on) [ 5.540484] Linux Plug and Play Support v0.97 (c) Adam Belay [ 5.540503] pnp: PnP ACPI init [ 5.540519] ACPI: bus type pnp registered [ 5.546422] pnp: PnP ACPI: found 13 devices [ 5.546428] ACPI: ACPI bus type pnp unregistered [ 5.546434] PnPBIOS: Disabled by ACPI PNP [ 5.546536] PCI: Using ACPI for IRQ routing [ 5.546541] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 5.554223] NET: Registered protocol family 8 [ 5.554227] NET: Registered protocol family 20 [ 5.554344] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 5.554350] pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 5.554356] pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 5.554361] pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 5.554597] Time: tsc clocksource has been installed. [ 5.584918] PCI: Bridge: 0000:00:01.0 [ 5.584922] IO window: disabled. [ 5.584928] MEM window: c0100000-c01fffff [ 5.584933] PREFETCH window: e0000000-ebffffff [ 5.584944] PCI: Bus 3, cardbus bridge: 0000:02:00.0 [ 5.584949] IO window: 00002000-000020ff [ 5.584954] IO window: 00002400-000024ff [ 5.584960] PREFETCH window: f0000000-f3ffffff [ 5.584966] MEM window: c4000000-c7ffffff [ 5.584971] PCI: Bus 7, cardbus bridge: 0000:02:00.1 [ 5.584975] IO window: 00002800-000028ff [ 5.584981] IO window: 00002c00-00002cff [ 5.584987] PREFETCH window: f4000000-f7ffffff [ 5.584992] MEM window: c8000000-cbffffff [ 5.584997] PCI: Bridge: 0000:00:1e.0 [ 5.585002] IO window: 2000-6fff [ 5.585008] MEM window: c0200000-cfffffff [ 5.585014] PREFETCH window: f0000000-f7ffffff [ 5.585033] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 5.585654] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 5.585661] PCI: setting IRQ 11 as level-triggered [ 5.585666] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 5.586223] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 5.586228] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 5.586256] NET: Registered protocol family 2 [ 5.622642] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 5.622739] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 5.623159] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 5.623515] TCP: Hash tables configured (established 16384 bind 16384) [ 5.623521] TCP reno registered [ 5.634882] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 [ 6.107748] it is [ 6.673501] Freeing initrd memory: 7016k freed [ 6.673795] Simple Boot Flag at 0x35 set to 0x1 [ 6.674270] audit: initializing netlink socket (disabled) [ 6.674299] audit(1190552014.712:1): initialized [ 6.678339] VFS: Disk quotas dquot_6.5.1 [ 6.678467] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 6.678666] io scheduler noop registered [ 6.678672] io scheduler anticipatory registered [ 6.678676] io scheduler deadline registered [ 6.678713] io scheduler cfq registered (default) [ 6.678786] Boot video device is 0000:01:00.0 [ 6.679165] isapnp: Scanning for PnP cards... [ 7.032144] isapnp: No Plug & Play device found [ 7.083309] Real Time Clock Driver v1.12ac [ 7.083482] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 7.083588] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 7.083843] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 7.084832] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 7.086234] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 7.086612] input: Macintosh mouse button emulation as /class/input/input0 [ 7.086763] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 7.094086] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.094097] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 7.094388] mice: PS/2 mouse device common for all mice [ 7.094594] EISA: Probing bus 0 at eisa.0 [ 7.094608] Cannot allocate resource for EISA slot 1 [ 7.094614] Cannot allocate resource for EISA slot 2 [ 7.094618] Cannot allocate resource for EISA slot 3 [ 7.094622] Cannot allocate resource for EISA slot 4 [ 7.094625] Cannot allocate resource for EISA slot 5 [ 7.094629] Cannot allocate resource for EISA slot 6 [ 7.094639] EISA: Detected 0 cards. [ 7.094824] TCP cubic registered [ 7.094861] NET: Registered protocol family 1 [ 7.094914] Using IPI No-Shortcut mode [ 7.095222] Magic number: 7:358:886 [ 7.095359] hash matches device ptyud [ 7.095903] Freeing unused kernel memory: 364k freed [ 7.130172] input: AT Translated Set 2 keyboard as /class/input/input1 [ 8.424515] AppArmor: AppArmor initialized<5>audit(1190552016.212:2): type=1505 info="AppArmor initialized" pid=1190 [ 8.440527] fuse init (API version 7.8) [ 8.448914] Failure registering capabilities with primary security module. [ 8.472077] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 8.475217] ACPI: Thermal Zone [THM0] (73 C) [ 9.315185] usbcore: registered new interface driver usbfs [ 9.315229] usbcore: registered new interface driver hub [ 9.315268] usbcore: registered new device driver usb [ 9.317673] USB Universal Host Controller Interface driver v3.0 [ 9.317801] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 9.317821] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 9.317828] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 9.318092] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 9.318124] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 [ 9.318334] usb usb1: configuration #1 chosen from 1 choice [ 9.318382] hub 1-0:1.0: USB hub found [ 9.318395] hub 1-0:1.0: 2 ports detected [ 9.422195] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 9.422204] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 9.422221] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 9.422228] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 9.422273] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 9.422304] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 [ 9.422481] usb usb2: configuration #1 chosen from 1 choice [ 9.422531] hub 2-0:1.0: USB hub found [ 9.422544] hub 2-0:1.0: 2 ports detected [ 9.512608] SCSI subsystem initialized [ 9.529861] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 9.529871] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 9.529892] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 9.529897] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 9.529948] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 9.529981] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 [ 9.530185] usb usb3: configuration #1 chosen from 1 choice [ 9.530238] hub 3-0:1.0: USB hub found [ 9.530252] hub 3-0:1.0: 2 ports detected [ 9.530483] libata version 2.21 loaded. [ 9.613980] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 9.613988] e100: Copyright(c) 1999-2006 Intel Corporation [ 9.707145] ata_piix 0000:00:1f.1: version 2.11 [ 9.707170] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 9.707185] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 9.707244] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 9.707456] scsi0 : ata_piix [ 9.707534] scsi1 : ata_piix [ 9.708295] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14 [ 9.708302] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15 [ 9.766207] Floppy drive(s): fd0 is 1.44M [ 9.831388] FDC 0 is a National Semiconductor PC87306 [ 9.869695] ata1.00: ATA-6: HTS424030M9AT00, MAAIA75A, max UDMA/100 [ 9.869704] ata1.00: 58605120 sectors, multi 16: LBA [ 9.885663] ata1.00: configured for UDMA/100 [ 5.108000] Marking TSC unstable due to: possible TSC halt in C2. [ 5.112000] Time: acpi_pm clocksource has been installed. [ 5.240000] Clocksource tsc unstable (delta = -85830920 ns) [ 5.536000] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8081N, 0012, max UDMA/33 [ 5.724000] ata2.00: configured for UDMA/33 [ 5.724000] scsi 0:0:0:0: Direct-Access ATA HTS424030M9AT00 MAAI PQ: 0 ANSI: 5 [ 5.728000] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8081N 0012 PQ: 0 ANSI: 5 [ 5.728000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [ 5.732000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 5.752000] e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC addr 00:D0:59:CF:FC:56 [ 5.784000] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB) [ 5.784000] sd 0:0:0:0: [sda] Write Protect is off [ 5.784000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.784000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.784000] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB) [ 5.784000] sd 0:0:0:0: [sda] Write Protect is off [ 5.784000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.784000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.784000] sda: sda1 sda2 sda3 < sda5 > [ 5.828000] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.836000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.836000] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.888000] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray [ 5.888000] Uniform CD-ROM driver Revision: 3.20 [ 5.888000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 6.260000] Attempting manual resume [ 6.260000] swsusp: Resume From Partition 8:5 [ 6.260000] PM: Checking swsusp image. [ 6.260000] PM: Resume from disk failed. [ 6.276000] JFS: nTxBlock = 4025, nTxLock = 32207 [ 29.544000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 29.592000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 29.644000] Linux agpgart interface v0.102 (c) Dave Jones [ 29.652000] agpgart: Detected an Intel 830M Chipset. [ 29.668000] agpgart: AGP aperture is 256M @ 0xd0000000 [ 29.984000] iTCO_vendor_support: vendor-support=0 [ 30.056000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 30.056000] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060) [ 30.056000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 30.156000] intel_rng: FWH not detected [ 30.768000] Yenta: CardBus bridge found at 0000:02:00.0 [1014:023b] [ 30.768000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 30.768000] Yenta: Routing CardBus interrupts to PCI [ 30.768000] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64 [ 31.000000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 [ 31.000000] Socket status: 30000006 [ 31.000000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x6fff [ 31.000000] cs: IO port probe 0x2000-0x6fff: clean. [ 31.000000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 31.000000] pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff [ 31.000000] Yenta: CardBus bridge found at 0000:02:00.1 [1014:023b] [ 31.000000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 31.000000] Yenta: Routing CardBus interrupts to PCI [ 31.000000] Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64 [ 31.136000] input: PC Speaker as /class/input/input2 [ 31.232000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 [ 31.232000] Socket status: 30000020 [ 31.232000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x6fff [ 31.232000] cs: IO port probe 0x2000-0x6fff: clean. [ 31.232000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 31.232000] pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff [ 31.868000] pccard: CardBus card inserted into slot 1 [ 32.024000] irda_init() [ 32.024000] NET: Registered protocol family 23 [ 32.128000] ath_hal: module license 'Proprietary' taints kernel. [ 32.132000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 32.192000] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 32.208000] input: TPPS/2 IBM TrackPoint as /class/input/input3 [ 32.212000] parport_pc 00:0b: reported by Plug and Play ACPI [ 32.212000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 32.308000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [ 32.308000] nsc-ircc, chip->init [ 32.308000] nsc-ircc, Found chip at base=0x02e [ 32.308000] nsc-ircc, driver loaded (Dag Brattli) [ 32.308000] nsc_ircc_open(), can't get iobase of 0x2f8 [ 32.308000] nsc-ircc, Found chip at base=0x02e [ 32.308000] nsc-ircc, driver loaded (Dag Brattli) [ 32.308000] nsc_ircc_open(), can't get iobase of 0x2f8 [ 32.308000] pnp: Device 00:0c disabled. [ 32.408000] wlan: 0.8.4.2 (0.9.3.2) [ 32.520000] ath_pci: 0.9.4.5 (0.9.3.2) [ 32.520000] PCI: Enabling device 0000:07:00.0 (0000 -> 0002) [ 32.520000] ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 33.244000] cs: IO port probe 0x100-0x3af: clean. [ 33.244000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 33.244000] cs: IO port probe 0x820-0x8ff: clean. [ 33.244000] cs: IO port probe 0xc00-0xcf7: clean. [ 33.244000] cs: IO port probe 0xa00-0xaff: clean. [ 33.280000] cs: IO port probe 0x100-0x3af: clean. [ 33.280000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 33.280000] cs: IO port probe 0x820-0x8ff: clean. [ 33.280000] cs: IO port probe 0xc00-0xcf7: clean. [ 33.280000] cs: IO port probe 0xa00-0xaff: clean. [ 33.308000] ath_rate_sample: 1.2 (0.9.3.2) [ 33.388000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 33.388000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 33.388000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 33.388000] wifi0: mac 7.8 phy 4.5 radio 5.6 [ 33.388000] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 33.388000] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 33.388000] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 33.388000] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 33.388000] wifi0: Use hw queue 8 for CAB traffic [ 33.388000] wifi0: Use hw queue 9 for beacons [ 33.460000] wifi0: Atheros 5212: mem=0xc8000000, irq=11 [ 33.616000] PCI: Enabling device 0000:00:1f.5 (0000 -> 0001) [ 33.616000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 33.616000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 34.324000] intel8x0_measure_ac97_clock: measured 55643 usecs [ 34.324000] intel8x0: clocking to 48000 [ 35.212000] loop: module loaded [ 35.264000] lp0: using parport0 (interrupt-driven). [ 35.436000] Adding 666656k swap on /dev/sda5. Priority:-1 extents:1 across:666656k [ 39.604000] ACPI: AC Adapter [AC] (on-line) [ 39.704000] ACPI: Battery Slot [BAT0] (battery present) [ 39.768000] ACPI: ACPI Dock Station Driver [ 39.776000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay [ 39.776000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler [ 39.776000] ACPI: Error installing bay notify handler [ 39.776000] ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added [ 39.880000] input: Power Button (FF) as /class/input/input4 [ 39.880000] ACPI: Power Button (FF) [PWRF] [ 39.912000] input: Lid Switch as /class/input/input5 [ 39.912000] ACPI: Lid Switch [LID] [ 39.928000] input: Sleep Button (CM) as /class/input/input6 [ 39.928000] ACPI: Sleep Button (CM) [SLPB] [ 40.304000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 44.476000] ttyS1: LSR safety check engaged! [ 44.872000] NET: Registered protocol family 10 [ 44.872000] lo: Disabled Privacy Extensions [ 44.872000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 45.332000] ppdev: user-space parallel port driver [ 46.236000] audit(1190544860.036:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4635 profile="/usr/sbin/cupsd" [ 46.440000] IBM machine detected. Enabling interrupts during APM calls. [ 46.440000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 46.440000] apm: overridden by ACPI. [ 46.752000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 46.752000] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 46.752000] thinkpad_acpi: ThinkPad EC firmware 1AHT23WW-1.06a [ 46.760000] thinkpad_acpi: another device driver is already handling bay events [ 46.760000] thinkpad_acpi: disabling subdriver bay [ 46.924000] Non-volatile memory driver v1.2 [ 47.028000] input: /usr/sbin/thinkpad-keys as /class/input/input7 [ 47.360000] Failure registering capabilities with primary security module. [ 51.936000] [drm] Initialized drm 1.1.0 20060810 [ 52.304000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 52.308000] [drm] Initialized savage 2.4.1 20050313 on minor 0 [ 52.308000] mtrr: base(0xe4000000) is not aligned on a size(0x5000000) boundary [ 52.308000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 52.308000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode [ 52.308000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [ 55.140000] ath0: no IPv6 routers present [ 107.708000] NET: Registered protocol family 17 [ 124.448000] ath0: no IPv6 routers present [ 127.088000] pccard: card ejected from slot 1 [ 127.356000] ACPI: PCI interrupt for device 0000:07:00.0 disabled [ 127.804000] ACPI: PCI interrupt for device 0000:02:08.0 disabled [ 131.056000] PM: Preparing system for mem sleep [ 131.056000] Stopping tasks ... done. [ 136.884000] Suspending console(s) [ 136.884000] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 137.268000] sd 0:0:0:0: [sda] Stopping disk [ 137.744000] usb_device usbdev3.1: PM: suspend 0->2, parent usb3 already 2 [ 137.744000] usb_endpoint usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2 [ 137.744000] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2 [ 137.744000] usb_endpoint usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2 [ 137.744000] usb_device usbdev2.1: PM: suspend 0->2, parent usb2 already 2 [ 137.744000] usb_endpoint usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2 [ 137.744000] hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2 [ 137.744000] usb_endpoint usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2 [ 137.744000] usb_device usbdev1.1: PM: suspend 0->2, parent usb1 already 2 [ 137.744000] usb_endpoint usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2 [ 137.744000] hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2 [ 137.744000] usb_endpoint usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2 [ 138.416000] pnp: Device 00:0b disabled. [ 138.416000] pnp: Device 00:0a disabled. [ 138.416000] ACPI: PCI interrupt for device 0000:00:1f.5 disabled [ 138.416000] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 138.416000] pci_set_power_state(): 0000:00:1f.1: state=3, current state=5 [ 138.416000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 138.416000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 138.416000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 140.160000] Disabling non-boot CPUs ... [ 140.160000] PM: Entering mem sleep [ 140.160000] Back to C! [ 140.160000] PM: Finishing wakeup. [ 140.160000] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2a000f0, writing 22a000f0) [ 140.160000] PCI: Enabling device 0000:00:1d.0 (0000 -> 0001) [ 140.160000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 140.160000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 140.160000] PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b) [ 140.160000] PM: Writing back config space on device 0000:00:1d.0 at offset 8 (was 1, writing 1801) [ 140.160000] usb usb1: root hub lost power or was reset [ 140.160000] PCI: Enabling device 0000:00:1d.1 (0000 -> 0001) [ 140.160000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 140.160000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 140.160000] PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b) [ 140.160000] PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing 1821) [ 140.160000] usb usb2: root hub lost power or was reset [ 140.160000] PCI: Enabling device 0000:00:1d.2 (0000 -> 0001) [ 140.160000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 140.160000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 140.160000] PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b) [ 140.160000] PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing 1841) [ 140.160000] usb usb3: root hub lost power or was reset [ 140.160000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 140.160000] PM: Writing back config space on device 0000:00:1f.1 at offset 9 (was 0, writing 30000000) [ 140.160000] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2800007) [ 140.160000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 140.160000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 140.160000] PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2800000, writing 2800001) [ 140.160000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 140.160000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 140.272000] PM: Writing back config space on device 0000:01:00.0 at offset 7 (was 8, writing e0000008) [ 140.272000] PM: Writing back config space on device 0000:01:00.0 at offset 6 (was 8, writing e4000008) [ 140.272000] PM: Writing back config space on device 0000:01:00.0 at offset 5 (was 8, writing e8000008) [ 140.272000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 140.272000] PM: Writing back config space on device 0000:02:08.0 at offset f (was 38080100, writing 3808010b) [ 140.272000] PM: Writing back config space on device 0000:02:08.0 at offset 5 (was 1, writing 6401) [ 140.272000] PM: Writing back config space on device 0000:02:08.0 at offset 4 (was 0, writing c0200000) [ 140.272000] PM: Writing back config space on device 0000:02:08.0 at offset 3 (was 0, writing 4208) [ 140.272000] PM: Writing back config space on device 0000:02:08.0 at offset 1 (was 2900000, writing 2900113) [ 140.272000] pnp: Device 00:0a activated. [ 140.272000] pnp: Device 00:0b activated. [ 140.616000] sd 0:0:0:0: [sda] Starting disk [ 140.972000] ata2.00: configured for UDMA/33 [ 141.412000] ata1.00: configured for UDMA/100 [ 141.436000] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB) [ 141.436000] Restarting tasks ... <5>sd 0:0:0:0: [sda] Write Protect is off [ 141.440000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 141.440000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 141.476000] done. [ 141.896000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 141.896000] e100: Copyright(c) 1999-2006 Intel Corporation [ 141.900000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 142.020000] e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC addr 00:D0:59:CF:FC:56 [ 142.036000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 142.772000] pccard: CardBus card inserted into slot 1 [ 142.772000] PCI: Enabling device 0000:07:00.0 (0000 -> 0002) [ 142.772000] ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 143.412000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 143.412000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 143.412000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 143.412000] wifi0: mac 7.8 phy 4.5 radio 5.6 [ 143.412000] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 143.412000] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 143.412000] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 143.412000] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 143.412000] wifi0: Use hw queue 8 for CAB traffic [ 143.412000] wifi0: Use hw queue 9 for beacons [ 143.412000] wifi0: Atheros 5212: mem=0xc8000000, irq=11 [ 145.104000] input: Power Button (FF) as /class/input/input8 [ 145.104000] ACPI: Power Button (FF) [PWRF] [ 145.112000] input: Lid Switch as /class/input/input9 [ 145.112000] ACPI: Lid Switch [LID] [ 145.116000] input: Sleep Button (CM) as /class/input/input10 [ 145.116000] ACPI: Sleep Button (CM) [SLPB] [ 146.976000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 146.996000] ACPI: Thermal Zone [THM0] (62 C) [ 147.264000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 147.264000] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 147.264000] thinkpad_acpi: ThinkPad EC firmware 1AHT23WW-1.06a [ 147.272000] thinkpad_acpi: another device driver is already handling bay events [ 147.272000] thinkpad_acpi: disabling subdriver bay [ 147.404000] ACPI: AC Adapter [AC] (on-line) [ 147.516000] ACPI: Battery Slot [BAT0] (battery present) [ 153.912000] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready [ 173.996000] ath0: no IPv6 routers present