[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe80400 (usable) [ 0.000000] BIOS-e820: 000000007fe80400 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 523904) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 523904 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 523904 [ 0.000000] On node 0 totalpages: 523904 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292227 pages, LIFO batch:31 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FBB00 checksum 0 [ 0.000000] ACPI: RSDP 000FBB00, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT 7FE81E00, 0064 (r1 DELL M08 27D70717 ASL 61) [ 0.000000] ACPI: FACP 7FE81C9C, 00F4 (r4 DELL M08 27D70717 ASL 61) [ 0.000000] ACPI: DSDT 7FE82400, 613B (r2 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 7FE90C00, 0040 [ 0.000000] ACPI: HPET 7FE81F00, 0038 (r1 DELL M08 1 ASL 61) [ 0.000000] ACPI: APIC 7FE82000, 0068 (r1 DELL M08 27D70717 ASL 47) [ 0.000000] ACPI: ASF! 7FE81C00, 007E (r32 DELL M08 27D70717 ASL 61) [ 0.000000] ACPI: MCFG 7FE81FC0, 003E (r16 DELL M08 27D70717 ASL 61) [ 0.000000] ACPI: SLIC 7FE8209C, 0176 (r1 DELL M08 27D70717 ASL 61) [ 0.000000] ACPI: TCPA 7FE82300, 0032 (r1 0 ASL 0) [ 0.000000] ACPI: SSDT 7FE806EF, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:74000000) [ 0.000000] Built 1 zonelists. Total pages: 519811 [ 0.000000] Kernel command line: root=UUID=be55b661-677e-4b64-9939-f8f9cf30e9c5 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2194.026 MHz processor. [ 10.710896] Console: colour VGA+ 80x25 [ 10.711189] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 10.711459] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 10.774234] Memory: 2065840k/2095616k available (2015k kernel code, 28452k reserved, 916k data, 364k init, 1178112k highmem) [ 10.774241] virtual kernel memory layout: [ 10.774242] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 10.774243] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 10.774244] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 10.774245] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 10.774246] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 10.774247] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 10.774247] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 10.774250] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 10.774280] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 10.774397] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 10.774401] hpet0: 3 64-bit timers, 14318180 Hz [ 10.855289] Calibrating delay using timer specific routine.. 4392.58 BogoMIPS (lpj=8785167) [ 10.855309] Security Framework v1.0.0 initialized [ 10.855314] SELinux: Disabled at boot. [ 10.855324] Mount-cache hash table entries: 512 [ 10.855427] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 10.855433] monitor/mwait feature present. [ 10.855435] using mwait in idle threads. [ 10.855438] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.855440] CPU: L2 cache: 4096K [ 10.855442] CPU: Physical Processor ID: 0 [ 10.855444] CPU: Processor Core ID: 0 [ 10.855445] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 10.855453] Compat vDSO mapped to ffffe000. [ 10.855463] Checking 'hlt' instruction... OK. [ 10.871351] SMP alternatives: switching to UP code [ 10.871697] Early unpacking initramfs... done [ 11.130858] ACPI: Core revision 20070126 [ 11.130895] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 11.135247] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a [ 11.135260] SMP alternatives: switching to SMP code [ 11.135320] Booting processor 1/1 eip 3000 [ 11.145726] Initializing CPU#1 [ 11.222687] Calibrating delay using timer specific routine.. 4387.70 BogoMIPS (lpj=8775410) [ 11.222692] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 11.222696] monitor/mwait feature present. [ 11.222698] CPU: L1 I cache: 32K, L1 D cache: 32K [ 11.222700] CPU: L2 cache: 4096K [ 11.222701] CPU: Physical Processor ID: 0 [ 11.222703] CPU: Processor Core ID: 1 [ 11.222704] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 11.223339] CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a [ 11.223359] Total of 2 processors activated (8780.28 BogoMIPS). [ 11.223554] ENABLING IO-APIC IRQs [ 11.223749] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 11.370520] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 11.390501] Brought up 2 CPUs [ 11.724425] migration_cost=25 [ 11.724528] Booting paravirtualized kernel on bare hardware [ 11.724611] Time: 9:12:46 Date: 10/18/107 [ 11.724626] NET: Registered protocol family 16 [ 11.724689] EISA bus registered [ 11.724693] ACPI: bus type pci registered [ 11.735754] PCI: PCI BIOS revision 2.10 entry at 0xfa8a6, last bus=12 [ 11.735756] PCI: Using configuration type 1 [ 11.735757] Setting up standard PCI resources [ 11.742636] ACPI: EC: Look up EC in DSDT [ 11.794923] ACPI: SSDT 7FE90C80, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) [ 11.795072] ACPI: Interpreter enabled [ 11.795075] ACPI: (supports S0 S3 S4 S5) [ 11.795087] ACPI: Using IOAPIC for interrupt routing [ 11.837360] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 11.837372] PCI: Probing PCI hardware (bus 00) [ 11.839375] PCI: Transparent bridge - 0000:00:1e.0 [ 11.839512] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 11.839877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 11.840015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 11.840100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 11.840198] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 11.840298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 11.854932] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *5 [ 11.855028] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 11.855113] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled. [ 11.855207] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 [ 11.855301] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 11.855396] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 11.855492] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 11.855578] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 11.855684] Linux Plug and Play Support v0.97 (c) Adam Belay [ 11.855692] pnp: PnP ACPI init [ 11.855697] ACPI: bus type pnp registered [ 11.910372] pnp: PnP ACPI: found 14 devices [ 11.910374] ACPI: ACPI bus type pnp unregistered [ 11.910376] PnPBIOS: Disabled by ACPI PNP [ 11.910409] PCI: Using ACPI for IRQ routing [ 11.910411] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 11.956519] NET: Registered protocol family 8 [ 11.956520] NET: Registered protocol family 20 [ 11.956559] pnp: 00:05: ioport range 0xc80-0xcaf has been reserved [ 11.956561] pnp: 00:05: ioport range 0xcc0-0xcff could not be reserved [ 11.956567] pnp: 00:08: iomem range 0xfed00000-0xfed003ff has been reserved [ 11.956571] pnp: 00:0a: ioport range 0xcb0-0xcbb has been reserved [ 11.956573] pnp: 00:0a: iomem range 0xfed40000-0xfed44fff could not be reserved [ 11.956577] pnp: 00:0b: ioport range 0x900-0x97f has been reserved [ 11.956579] pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved [ 11.956581] pnp: 00:0b: ioport range 0x1000-0x1005 has been reserved [ 11.956584] pnp: 00:0b: ioport range 0x1008-0x100f has been reserved [ 11.956587] pnp: 00:0c: ioport range 0xf400-0xf4fe has been reserved [ 11.956589] pnp: 00:0c: ioport range 0x1006-0x1007 has been reserved [ 11.956592] pnp: 00:0c: ioport range 0x100a-0x1059 could not be reserved [ 11.956594] pnp: 00:0c: ioport range 0x1060-0x107f has been reserved [ 11.956596] pnp: 00:0c: ioport range 0x1080-0x10bf has been reserved [ 11.956598] pnp: 00:0c: ioport range 0x10c0-0x10df has been reserved [ 11.956600] pnp: 00:0c: ioport range 0x1010-0x102f has been reserved [ 11.956604] pnp: 00:0d: iomem range 0x0-0x9efff could not be reserved [ 11.956606] pnp: 00:0d: iomem range 0x9f000-0x9ffff could not be reserved [ 11.956608] pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved [ 11.956611] pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 11.957497] Time: tsc clocksource has been installed. [ 11.957508] Switched to high resolution mode on CPU 0 [ 11.957572] Switched to high resolution mode on CPU 1 [ 11.986801] PCI: Bridge: 0000:00:01.0 [ 11.986803] IO window: d000-dfff [ 11.986807] MEM window: fa000000-feafffff [ 11.986810] PREFETCH window: e0000000-efffffff [ 11.986813] PCI: Bridge: 0000:00:1c.0 [ 11.986814] IO window: disabled. [ 11.986819] MEM window: disabled. [ 11.986823] PREFETCH window: disabled. [ 11.986829] PCI: Bridge: 0000:00:1c.1 [ 11.986830] IO window: disabled. [ 11.986836] MEM window: f9f00000-f9ffffff [ 11.986840] PREFETCH window: disabled. [ 11.986845] PCI: Bridge: 0000:00:1c.5 [ 11.986846] IO window: disabled. [ 11.986852] MEM window: f9e00000-f9efffff [ 11.986856] PREFETCH window: disabled. [ 11.986867] PCI: Bus 4, cardbus bridge: 0000:03:01.0 [ 11.986869] IO window: 00002000-000020ff [ 11.986873] IO window: 00002400-000024ff [ 11.986878] PREFETCH window: 88000000-8bffffff [ 11.986883] MEM window: 8c000000-8fffffff [ 11.986888] PCI: Bridge: 0000:00:1e.0 [ 11.986890] IO window: 2000-2fff [ 11.986896] MEM window: f9d00000-f9dfffff [ 11.986901] PREFETCH window: 88000000-8bffffff [ 11.986915] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 11.986919] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 11.986941] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 11.986946] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 11.986970] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 11.986975] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 11.986997] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 11.987003] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 11.987016] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 11.987033] PCI: Enabling device 0000:03:01.0 (0000 -> 0003) [ 11.987037] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 11.987050] NET: Registered protocol family 2 [ 12.037329] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 12.037372] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 12.037865] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 12.038028] TCP: Hash tables configured (established 131072 bind 65536) [ 12.038030] TCP reno registered [ 12.053389] checking if image is initramfs... it is [ 12.564430] Freeing initrd memory: 7329k freed [ 12.564886] audit: initializing netlink socket (disabled) [ 12.564898] audit(1195377166.560:1): initialized [ 12.564969] highmem bounce pool size: 64 pages [ 12.566342] VFS: Disk quotas dquot_6.5.1 [ 12.566378] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 12.566445] io scheduler noop registered [ 12.566447] io scheduler anticipatory registered [ 12.566448] io scheduler deadline registered [ 12.566458] io scheduler cfq registered (default) [ 12.566590] Boot video device is 0000:01:00.0 [ 12.566658] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 12.566691] assign_interrupt_mode Found MSI capability [ 12.566693] Allocate Port Service[0000:00:01.0:pcie00] [ 12.566719] Allocate Port Service[0000:00:01.0:pcie02] [ 12.566783] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 12.566841] assign_interrupt_mode Found MSI capability [ 12.566843] Allocate Port Service[0000:00:1c.0:pcie00] [ 12.566864] Allocate Port Service[0000:00:1c.0:pcie02] [ 12.566956] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 12.567014] assign_interrupt_mode Found MSI capability [ 12.567016] Allocate Port Service[0000:00:1c.1:pcie00] [ 12.567037] Allocate Port Service[0000:00:1c.1:pcie02] [ 12.567129] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 12.567187] assign_interrupt_mode Found MSI capability [ 12.567188] Allocate Port Service[0000:00:1c.5:pcie00] [ 12.567211] Allocate Port Service[0000:00:1c.5:pcie02] [ 12.567347] isapnp: Scanning for PnP cards... [ 12.920802] isapnp: No Plug & Play device found [ 12.935610] Real Time Clock Driver v1.12ac [ 12.935723] hpet_resources: 0xfed00000 is busy [ 12.935780] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 12.935903] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 12.936399] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 12.936851] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 12.936941] input: Macintosh mouse button emulation as /class/input/input0 [ 12.936997] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 12.940436] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 12.940440] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 12.940530] mice: PS/2 mouse device common for all mice [ 12.940603] EISA: Probing bus 0 at eisa.0 [ 12.940605] EISA: Cannot allocate resource for mainboard [ 12.940607] Cannot allocate resource for EISA slot 1 [ 12.940609] Cannot allocate resource for EISA slot 2 [ 12.940635] EISA: Detected 0 cards. [ 12.940695] TCP cubic registered [ 12.940704] NET: Registered protocol family 1 [ 12.940719] Using IPI No-Shortcut mode [ 12.940850] Magic number: 15:503:222 [ 12.940863] hash matches device ttyu6 [ 12.941074] Freeing unused kernel memory: 364k freed [ 12.944044] input: AT Translated Set 2 keyboard as /class/input/input1 [ 14.097332] AppArmor: AppArmor initialized<5>audit(1195377168.060:2): type=1505 info="AppArmor initialized" pid=1278 [ 14.105595] fuse init (API version 7.8) [ 14.114043] Failure registering capabilities with primary security module. [ 14.149261] ACPI: SSDT 7FE810F6, 0286 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 14.149429] ACPI: SSDT 7FE80BBB, 04B6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 14.161929] Monitor-Mwait will be used to enter C-1 state [ 14.161931] Monitor-Mwait will be used to enter C-2 state [ 14.161933] Monitor-Mwait will be used to enter C-3 state [ 14.161937] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 14.161941] ACPI: Processor [CPU0] (supports 8 throttling states) [ 14.162113] ACPI: SSDT 7FE8137C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 14.162266] ACPI: SSDT 7FE81071, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 14.184663] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 14.184668] ACPI: Processor [CPU1] (supports 8 throttling states) [ 3.288000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.292000] Time: hpet clocksource has been installed. [ 3.292000] ACPI: Thermal Zone [THM] (25 C) [ 3.616000] usbcore: registered new interface driver usbfs [ 3.616000] usbcore: registered new interface driver hub [ 3.616000] usbcore: registered new device driver usb [ 3.616000] USB Universal Host Controller Interface driver v3.0 [ 3.616000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 3.616000] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 3.616000] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.616000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.616000] uhci_hcd 0000:00:1a.0: irq 19, io base 0x00006f20 [ 3.616000] usb usb1: configuration #1 chosen from 1 choice [ 3.616000] hub 1-0:1.0: USB hub found [ 3.616000] hub 1-0:1.0: 2 ports detected [ 3.672000] SCSI subsystem initialized [ 3.676000] libata version 2.21 loaded. [ 3.720000] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 3.720000] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 3.720000] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.720000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 3.720000] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00006f00 [ 3.720000] usb usb2: configuration #1 chosen from 1 choice [ 3.720000] hub 2-0:1.0: USB hub found [ 3.720000] hub 2-0:1.0: 2 ports detected [ 3.824000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 3.824000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.824000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.824000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 3.824000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00006f80 [ 3.824000] usb usb3: configuration #1 chosen from 1 choice [ 3.824000] hub 3-0:1.0: USB hub found [ 3.824000] hub 3-0:1.0: 2 ports detected [ 3.928000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 3.928000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.928000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.928000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 3.928000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006f60 [ 3.928000] usb usb4: configuration #1 chosen from 1 choice [ 3.928000] hub 4-0:1.0: USB hub found [ 3.928000] hub 4-0:1.0: 2 ports detected [ 3.960000] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 4.000000] Clocksource tsc unstable (delta = -208719590 ns) [ 4.032000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 4.032000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 4.032000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.032000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 4.032000] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006f40 [ 4.032000] usb usb5: configuration #1 chosen from 1 choice [ 4.032000] hub 5-0:1.0: USB hub found [ 4.032000] hub 5-0:1.0: 2 ports detected [ 4.136000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 21 [ 4.136000] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 4.136000] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 4.136000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 4.136000] ehci_hcd 0000:00:1a.7: debug port 1 [ 4.136000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 4.136000] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xfed1c400 [ 4.136000] usb 1-2: configuration #1 chosen from 1 choice [ 4.140000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.140000] usb usb6: configuration #1 chosen from 1 choice [ 4.140000] hub 6-0:1.0: USB hub found [ 4.140000] hub 6-0:1.0: 4 ports detected [ 4.144000] usb 1-2: can't set config #1, error -84 [ 4.144000] usb 1-2: USB disconnect, address 2 [ 4.244000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 [ 4.244000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 4.244000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.244000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 4.244000] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.244000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 4.244000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfed1c000 [ 4.248000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.248000] usb usb7: configuration #1 chosen from 1 choice [ 4.248000] hub 7-0:1.0: USB hub found [ 4.248000] hub 7-0:1.0: 6 ports detected [ 4.352000] tg3.c:v3.77 (May 31, 2007) [ 4.352000] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 4.352000] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 4.376000] eth0: Tigon3 [partno(BCM95755m) rev a002 PHY(5755)] (PCI Express) 10/100/1000Base-T Ethernet 00:1c:23:1d:72:ec [ 4.376000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 4.376000] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 4.376000] ACPI: PCI Interrupt 0000:03:01.4[A] -> GSI 19 (level, low) -> IRQ 18 [ 4.424000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f9dff000-f9dff7ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 4.428000] ata_piix 0000:00:1f.1: version 2.11 [ 4.428000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 4.428000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 4.428000] scsi0 : ata_piix [ 4.428000] scsi1 : ata_piix [ 4.428000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00016fa0 irq 14 [ 4.428000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00016fa8 irq 15 [ 4.764000] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D200, max UDMA/33 [ 4.952000] ata1.00: configured for UDMA/33 [ 4.952000] ata2: port disabled. ignoring. [ 4.952000] scsi 0:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H D200 PQ: 0 ANSI: 5 [ 4.952000] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 5.108000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 5.108000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 5.108000] scsi2 : ata_piix [ 5.108000] scsi3 : ata_piix [ 5.108000] ata3: SATA max UDMA/133 cmd 0x00016eb0 ctl 0x00016eba bmdma 0x00016ee0 irq 17 [ 5.108000] ata4: SATA max UDMA/133 cmd 0x00016ec0 ctl 0x00016eca bmdma 0x00016ee8 irq 17 [ 5.232000] usb 7-1: new high speed USB device using ehci_hcd and address 2 [ 5.272000] ata3.00: ATA-8: Hitachi HTS722012K9A300, DCCOC54P, max UDMA/133 [ 5.272000] ata3.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 5.288000] ata3.00: configured for UDMA/133 [ 5.416000] usb 7-1: configuration #1 chosen from 1 choice [ 5.444000] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS72201 DCCO PQ: 0 ANSI: 5 [ 5.468000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 5.468000] Uniform CD-ROM driver Revision: 3.20 [ 5.468000] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 5.468000] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 5.468000] sd 2:0:0:0: [sda] Write Protect is off [ 5.468000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.468000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.468000] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 5.468000] sd 2:0:0:0: [sda] Write Protect is off [ 5.468000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.468000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.468000] sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 5.472000] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 5.492000] sda1 sda2 < sda5 > [ 5.516000] sd 2:0:0:0: [sda] Attached SCSI disk [ 5.668000] Attempting manual resume [ 5.668000] swsusp: Resume From Partition 8:5 [ 5.668000] PM: Checking swsusp image. [ 5.668000] PM: Resume from disk failed. [ 5.696000] kjournald starting. Commit interval 5 seconds [ 5.696000] EXT3-fs: mounted filesystem with ordered data mode. [ 5.704000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[434fc000282b9c70] [ 5.852000] usbcore: registered new interface driver libusual [ 6.092000] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 6.280000] usb 1-2: configuration #1 chosen from 1 choice [ 6.504000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 6.504000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 6.524000] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 6.572000] Initializing USB Mass Storage driver... [ 6.696000] usb 3-2: configuration #1 chosen from 1 choice [ 6.944000] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 7.096000] usb 5-1: configuration #1 chosen from 1 choice [ 7.096000] hub 5-1:1.0: USB hub found [ 7.100000] hub 5-1:1.0: 4 ports detected [ 7.216000] scsi4 : SCSI emulation for USB Mass Storage devices [ 7.216000] usb-storage: device found at 2 [ 7.216000] usb-storage: waiting for device to settle before scanning [ 7.432000] usb 5-1.2: new full speed USB device using uhci_hcd and address 3 [ 7.552000] usb 5-1.2: configuration #1 chosen from 1 choice [ 7.556000] usbcore: registered new interface driver usb-storage [ 7.556000] USB Mass Storage support registered. [ 10.960000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 10.968000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.040000] Linux agpgart interface v0.102 (c) Dave Jones [ 11.416000] input: PC Speaker as /class/input/input2 [ 11.424000] Bluetooth: Core ver 2.11 [ 11.424000] NET: Registered protocol family 31 [ 11.424000] Bluetooth: HCI device and connection manager initialized [ 11.424000] Bluetooth: HCI socket layer initialized [ 11.436000] Bluetooth: HCI USB driver ver 2.9 [ 11.440000] usbcore: registered new interface driver hci_usb [ 11.564000] ieee80211_crypt: registered algorithm 'NULL' [ 11.576000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 11.576000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 11.648000] nvidia: module license 'NVIDIA' taints kernel. [ 11.896000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 11.896000] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 11.896000] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007 [ 11.916000] Yenta: CardBus bridge found at 0000:03:01.0 [1028:01f9] [ 11.916000] Yenta O2: res at 0x94/0xD4: 00/ea [ 11.916000] Yenta O2: enabling read prefetch/write burst [ 11.932000] usbcore: registered new interface driver hiddev [ 11.948000] input: Logitech USB Receiver as /class/input/input3 [ 11.948000] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2 [ 11.948000] usbcore: registered new interface driver usbhid [ 11.948000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 11.964000] usbcore: registered new interface driver lmpcm_usb [ 11.964000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/misc/lmpcm_usb.c: v0.5.5:USB Logitech MediaPlay Cordless Mouse driver [ 11.984000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1 [ 11.984000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 12.068000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18 [ 12.068000] Socket status: 30000006 [ 12.068000] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 12.068000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 12.068000] cs: IO port probe 0x2000-0x2fff: clean. [ 12.068000] pcmcia: parent PCI bridge Memory window: 0xf9d00000 - 0xf9dfffff [ 12.068000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 12.068000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 12.068000] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 12.068000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 12.096000] input: PS/2 Mouse as /class/input/input4 [ 12.116000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input5 [ 12.216000] usb-storage: device scan complete [ 12.220000] scsi 4:0:0:0: Direct-Access COWON iAUDIO 7 0100 PQ: 0 ANSI: 0 [ 12.220000] sd 4:0:0:0: [sdb] 15908864 512-byte hardware sectors (8145 MB) [ 12.224000] sd 4:0:0:0: [sdb] Write Protect is off [ 12.224000] sd 4:0:0:0: [sdb] Mode Sense: 37 00 00 08 [ 12.224000] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 12.228000] sd 4:0:0:0: [sdb] 15908864 512-byte hardware sectors (8145 MB) [ 12.232000] sd 4:0:0:0: [sdb] Write Protect is off [ 12.232000] sd 4:0:0:0: [sdb] Mode Sense: 37 00 00 08 [ 12.232000] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 12.232000] sdb: unknown partition table [ 12.240000] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 12.240000] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 12.380000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 12.380000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 12.432000] cs: IO port probe 0x100-0x3af: clean. [ 12.432000] cs: IO port probe 0x3e0-0x4ff: clean. [ 12.432000] cs: IO port probe 0x820-0x8ff: clean. [ 12.436000] cs: IO port probe 0xc00-0xcf7: clean. [ 12.436000] cs: IO port probe 0xa00-0xaff: clean. [ 13.640000] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:558: hda_intel: azx_get_response timeout, switching to polling mode... [ 13.956000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels) [ 14.648000] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:564: hda_intel: azx_get_response timeout, switching to single_cmd mode... [ 14.852000] lp: driver loaded but no devices found [ 14.900000] Adding 4803392k swap on /dev/sda5. Priority:-1 extents:1 across:4803392k [ 15.148000] EXT3 FS on sda1, internal journal [ 17.496000] ACPI: Battery Slot [BAT0] (battery present) [ 17.496000] ACPI: Battery Slot [BAT1] (battery absent) [ 17.572000] ACPI: ACPI Dock Station Driver [ 17.572000] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay [ 17.572000] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler [ 17.572000] ACPI: Error installing bay notify handler [ 17.572000] ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added [ 17.572000] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: found ejectable bay [ 17.572000] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: Adding notify handler [ 17.572000] ACPI: Error installing bay notify handler [ 17.572000] ACPI: Bay [\_SB_.PCI0.IDE1.PRI_.MAST] Added [ 17.584000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 17.584000] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 17.584000] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 17.592000] input: Lid Switch as /class/input/input6 [ 17.592000] ACPI: Lid Switch [LID] [ 17.592000] input: Power Button (CM) as /class/input/input7 [ 17.592000] ACPI: Power Button (CM) [PBTN] [ 17.592000] input: Sleep Button (CM) as /class/input/input8 [ 17.592000] ACPI: Sleep Button (CM) [SBTN] [ 17.632000] ACPI: AC Adapter [AC] (on-line) [ 18.532000] ppdev: user-space parallel port driver [ 18.668000] audit(1195377183.576:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5324 profile="/usr/sbin/cupsd" [ 18.708000] apm: BIOS not found. [ 18.900000] PM: Writing back config space on device 0000:09:00.0 at offset c (was 10010000, writing 0) [ 19.000000] Failure registering capabilities with primary security module. [ 19.192000] Bluetooth: L2CAP ver 2.8 [ 19.192000] Bluetooth: L2CAP socket layer initialized [ 19.196000] Bluetooth: RFCOMM socket layer initialized [ 19.196000] Bluetooth: RFCOMM TTY layer initialized [ 19.196000] Bluetooth: RFCOMM ver 1.8 [ 46.096000] NET: Registered protocol family 17 [ 49.252000] ieee80211_crypt: registered algorithm 'WEP' [ 55.888000] NET: Registered protocol family 10 [ 55.888000] lo: Disabled Privacy Extensions [ 55.888000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 66.680000] eth1: no IPv6 routers present [ 668.200000] ipw3945: Error sending LEDS_CMD: time out after 500ms. [ 668.800000] ipw3945: Error sending LEDS_CMD: time out after 500ms. [ 669.300000] ipw3945: Error sending cmd #07 to daemon: time out after 500ms. [ 670.492000] ipw3945: Error sending SCAN_ABORT_CMD: time out after 500ms. [ 670.992000] ipw3945: Error sending cmd #08 to daemon: time out after 500ms. [ 671.492000] ipw3945: Error sending ADD_STA: time out after 500ms. [ 671.992000] ipw3945: Error sending SCAN_ABORT_CMD: time out after 500ms. [ 675.520000] ipw3945: Error sending LEDS_CMD: time out after 500ms. [ 706.160000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 730.992000] ipw3945: Error sending LEDS_CMD: time out after 500ms. [ 731.492000] ipw3945: Error sending LEDS_CMD: time out after 500ms.