[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fed0000 (usable) [ 0.000000] BIOS-e820: 000000003fed0000 - 000000003fedf000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fedf000 - 000000003ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f6810 [ 0.000000] Entering add_active_range(0, 0, 261840) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261840 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261840 [ 0.000000] On node 0 totalpages: 261840 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32211 pages, LIFO batch:7 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F67E0 checksum 0 [ 0.000000] ACPI: RSDP 000F67E0, 0024 (r2 LENOVO) [ 0.000000] ACPI: XSDT 3FED1545, 0084 (r1 LENOVO TP-79 2160 LTP 0) [ 0.000000] ACPI: FACP 3FED1600, 00F4 (r3 LENOVO TP-79 2160 LNVO 1) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT 3FED195E, D3C2 (r1 LENOVO TP-79 2160 MSFT 100000E) [ 0.000000] ACPI: FACS 3FEF4000, 0040 [ 0.000000] ACPI: SSDT 3FED17B4, 01AA (r1 LENOVO TP-79 2160 MSFT 100000E) [ 0.000000] ACPI: ECDT 3FEDED20, 0052 (r1 LENOVO TP-79 2160 LNVO 1) [ 0.000000] ACPI: TCPA 3FEDED72, 0032 (r2 LENOVO TP-79 2160 LNVO 1) [ 0.000000] ACPI: APIC 3FEDEDA4, 0068 (r1 LENOVO TP-79 2160 LNVO 1) [ 0.000000] ACPI: MCFG 3FEDEE0C, 003C (r1 LENOVO TP-79 2160 LNVO 1) [ 0.000000] ACPI: HPET 3FEDEE48, 0038 (r1 LENOVO TP-79 2160 LNVO 1) [ 0.000000] ACPI: BOOT 3FEDEFD8, 0028 (r1 LENOVO TP-79 2160 LTP 1) [ 0.000000] ACPI: SSDT 3FEF2655, 025F (r1 LENOVO TP-79 2160 INTL 20050513) [ 0.000000] ACPI: SSDT 3FEF28B4, 00A6 (r1 LENOVO TP-79 2160 INTL 20050513) [ 0.000000] ACPI: SSDT 3FEF295A, 04F7 (r1 LENOVO TP-79 2160 INTL 20050513) [ 0.000000] ACPI: SSDT 3FEF2E51, 01D8 (r1 LENOVO TP-79 2160 INTL 20050513) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] Built 1 zonelists. Total pages: 259795 [ 0.000000] Kernel command line: root=UUID=4d0bdb94-f100-4dfa-b1d5-767cb75923ef ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1828.822 MHz processor. [ 9.901704] Console: colour VGA+ 80x25 [ 9.901950] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 9.902285] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 9.931723] Memory: 1026732k/1047360k available (2015k kernel code, 19988k reserved, 916k data, 364k init, 129856k highmem) [ 9.931732] virtual kernel memory layout: [ 9.931733] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 9.931734] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 9.931736] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 9.931737] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 9.931738] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 9.931739] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 9.931741] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 9.931744] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 9.931776] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 9.931909] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 9.931914] hpet0: 3 64-bit timers, 14318180 Hz [ 10.012797] Calibrating delay using timer specific routine.. 3661.54 BogoMIPS (lpj=7323086) [ 10.012816] Security Framework v1.0.0 initialized [ 10.012823] SELinux: Disabled at boot. [ 10.012835] Mount-cache hash table entries: 512 [ 10.012939] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 10.012947] monitor/mwait feature present. [ 10.012948] using mwait in idle threads. [ 10.012952] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.012954] CPU: L2 cache: 2048K [ 10.012957] CPU: Physical Processor ID: 0 [ 10.012959] CPU: Processor Core ID: 0 [ 10.012961] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 [ 10.012968] Compat vDSO mapped to ffffe000. [ 10.012979] Checking 'hlt' instruction... OK. [ 10.028865] SMP alternatives: switching to UP code [ 10.029249] Early unpacking initramfs... done [ 10.346686] ACPI: Core revision 20070126 [ 10.346782] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 10.365356] CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [ 10.365373] SMP alternatives: switching to SMP code [ 10.365477] Booting processor 1/1 eip 3000 [ 10.375952] Initializing CPU#1 [ 10.456324] Calibrating delay using timer specific routine.. 3657.54 BogoMIPS (lpj=7315083) [ 10.456331] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 10.456335] monitor/mwait feature present. [ 10.456339] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.456341] CPU: L2 cache: 2048K [ 10.456343] CPU: Physical Processor ID: 0 [ 10.456344] CPU: Processor Core ID: 1 [ 10.456346] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 [ 10.456614] CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [ 10.456638] Total of 2 processors activated (7319.08 BogoMIPS). [ 10.456834] ENABLING IO-APIC IRQs [ 10.457040] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 10.603878] checking TSC synchronization [CPU#0 -> CPU#1]: [ 10.623853] Measured 520850 cycles TSC warp between CPUs, turning off TSC clock. [ 0.552000] Marking TSC unstable due to: check_tsc_sync_source failed. [ 0.556000] Brought up 2 CPUs [ 0.744000] migration_cost=4000 [ 0.744000] Booting paravirtualized kernel on bare hardware [ 0.744000] Time: 12:03:16 Date: 09/18/107 [ 0.744000] NET: Registered protocol family 16 [ 0.744000] EISA bus registered [ 0.744000] ACPI: bus type pci registered [ 0.744000] PCI: PCI BIOS revision 2.10 entry at 0xfd84b, last bus=24 [ 0.744000] PCI: Using configuration type 1 [ 0.744000] Setting up standard PCI resources [ 0.748000] ACPI: EC: Found ECDT [ 0.756000] ACPI: Interpreter enabled [ 0.756000] ACPI: (supports S0 S3 S4 S5) [ 0.756000] ACPI: Using IOAPIC for interrupt routing [ 0.764000] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 0.764000] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.764000] PCI: Probing PCI hardware (bus 00) [ 0.768000] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.768000] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.768000] PCI: Transparent bridge - 0000:00:1e.0 [ 0.768000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.768000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.768000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.768000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.768000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.768000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.768000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.772000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.772000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.772000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.772000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.772000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.772000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.772000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.772000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.772000] ACPI: Power Resource [PUBS] (on) [ 0.772000] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.772000] pnp: PnP ACPI init [ 0.772000] ACPI: bus type pnp registered [ 0.776000] pnp: PnP ACPI: found 12 devices [ 0.776000] ACPI: ACPI bus type pnp unregistered [ 0.776000] PnPBIOS: Disabled by ACPI PNP [ 0.776000] PCI: Using ACPI for IRQ routing [ 0.776000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.832000] NET: Registered protocol family 8 [ 0.832000] NET: Registered protocol family 20 [ 0.832000] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.832000] pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 0.832000] pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 0.832000] pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 0.832000] pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 0.832000] pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 0.832000] pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved [ 0.832000] pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved [ 0.836000] Time: hpet clocksource has been installed. [ 0.836000] Switched to high resolution mode on CPU 0 [ 0.836000] Switched to high resolution mode on CPU 1 [ 0.860000] PCI: Bridge: 0000:00:01.0 [ 0.860000] IO window: 2000-2fff [ 0.860000] MEM window: ee100000-ee1fffff [ 0.860000] PREFETCH window: d8000000-dfffffff [ 0.860000] PCI: Bridge: 0000:00:1c.0 [ 0.860000] IO window: 3000-3fff [ 0.860000] MEM window: ee000000-ee0fffff [ 0.860000] PREFETCH window: disabled. [ 0.860000] PCI: Bridge: 0000:00:1c.1 [ 0.860000] IO window: 4000-5fff [ 0.860000] MEM window: ec000000-edffffff [ 0.860000] PREFETCH window: e4000000-e40fffff [ 0.860000] PCI: Bridge: 0000:00:1c.2 [ 0.860000] IO window: 6000-7fff [ 0.860000] MEM window: e8000000-e9ffffff [ 0.860000] PREFETCH window: e4100000-e41fffff [ 0.860000] PCI: Bridge: 0000:00:1c.3 [ 0.860000] IO window: 8000-9fff [ 0.860000] MEM window: ea000000-ebffffff [ 0.860000] PREFETCH window: e4200000-e42fffff [ 0.860000] PCI: Bus 22, cardbus bridge: 0000:15:00.0 [ 0.860000] IO window: 0000a000-0000a0ff [ 0.860000] IO window: 0000a400-0000a4ff [ 0.860000] PREFETCH window: e0000000-e3ffffff [ 0.860000] MEM window: 50000000-53ffffff [ 0.860000] PCI: Bridge: 0000:00:1e.0 [ 0.860000] IO window: a000-dfff [ 0.860000] MEM window: e4300000-e7ffffff [ 0.860000] PREFETCH window: e0000000-e3ffffff [ 0.860000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.860000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.860000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17 [ 0.860000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.860000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 18 [ 0.860000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.860000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 19 [ 0.860000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.860000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 20 [ 0.860000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.860000] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) [ 0.860000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.860000] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.860000] NET: Registered protocol family 2 [ 0.904000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.904000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 0.904000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.904000] TCP: Hash tables configured (established 131072 bind 65536) [ 0.904000] TCP reno registered [ 0.920000] checking if image is initramfs... it is [ 1.548000] Freeing initrd memory: 7081k freed [ 1.552000] Simple Boot Flag at 0x35 set to 0x1 [ 1.552000] audit: initializing netlink socket (disabled) [ 1.552000] audit(1192708996.336:1): initialized [ 1.552000] highmem bounce pool size: 64 pages [ 1.552000] VFS: Disk quotas dquot_6.5.1 [ 1.552000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.552000] io scheduler noop registered [ 1.552000] io scheduler anticipatory registered [ 1.552000] io scheduler deadline registered [ 1.552000] io scheduler cfq registered (default) [ 1.552000] Boot video device is 0000:01:00.0 [ 1.552000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 1.552000] assign_interrupt_mode Found MSI capability [ 1.552000] Allocate Port Service[0000:00:01.0:pcie00] [ 1.552000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.552000] assign_interrupt_mode Found MSI capability [ 1.552000] Allocate Port Service[0000:00:1c.0:pcie00] [ 1.552000] Allocate Port Service[0000:00:1c.0:pcie02] [ 1.552000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 1.552000] assign_interrupt_mode Found MSI capability [ 1.552000] Allocate Port Service[0000:00:1c.1:pcie00] [ 1.552000] Allocate Port Service[0000:00:1c.1:pcie02] [ 1.552000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 1.552000] assign_interrupt_mode Found MSI capability [ 1.552000] Allocate Port Service[0000:00:1c.2:pcie00] [ 1.552000] Allocate Port Service[0000:00:1c.2:pcie02] [ 1.552000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 1.552000] assign_interrupt_mode Found MSI capability [ 1.552000] Allocate Port Service[0000:00:1c.3:pcie00] [ 1.552000] Allocate Port Service[0000:00:1c.3:pcie02] [ 1.552000] isapnp: Scanning for PnP cards... [ 1.908000] isapnp: No Plug & Play device found [ 1.928000] Real Time Clock Driver v1.12ac [ 1.928000] hpet_resources: 0xfed00000 is busy [ 1.928000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.932000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1.932000] input: Macintosh mouse button emulation as /class/input/input0 [ 1.932000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.940000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.940000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.940000] mice: PS/2 mouse device common for all mice [ 1.940000] EISA: Probing bus 0 at eisa.0 [ 1.940000] Cannot allocate resource for EISA slot 1 [ 1.940000] Cannot allocate resource for EISA slot 2 [ 1.940000] Cannot allocate resource for EISA slot 3 [ 1.940000] Cannot allocate resource for EISA slot 4 [ 1.940000] Cannot allocate resource for EISA slot 5 [ 1.940000] Cannot allocate resource for EISA slot 6 [ 1.940000] Cannot allocate resource for EISA slot 7 [ 1.940000] Cannot allocate resource for EISA slot 8 [ 1.940000] EISA: Detected 0 cards. [ 1.940000] TCP cubic registered [ 1.940000] NET: Registered protocol family 1 [ 1.940000] Using IPI No-Shortcut mode [ 1.940000] Magic number: 11:162:77 [ 1.940000] Freeing unused kernel memory: 364k freed [ 1.948000] input: AT Translated Set 2 keyboard as /class/input/input1 [ 3.124000] AppArmor: AppArmor initialized<5>audit(1192708997.836:2): type=1505 info="AppArmor initialized" pid=1239 [ 3.132000] fuse init (API version 7.8) [ 3.136000] Failure registering capabilities with primary security module. [ 3.176000] ACPI: SSDT 3FEF1D36, 0240 (r1 PmRef Cpu0Ist 100 INTL 20050513) [ 3.176000] ACPI: SSDT 3FEF1FFB, 065A (r1 PmRef Cpu0Cst 100 INTL 20050513) [ 3.176000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 3.176000] ACPI: Processor [CPU0] (supports 8 throttling states) [ 3.176000] ACPI: SSDT 3FEF1C6E, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) [ 3.176000] ACPI: SSDT 3FEF1F76, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) [ 3.176000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 3.176000] ACPI: Processor [CPU1] (supports 8 throttling states) [ 3.180000] ACPI: Thermal Zone [THM0] (37 C) [ 3.180000] ACPI: Thermal Zone [THM1] (37 C) [ 3.604000] usbcore: registered new interface driver usbfs [ 3.604000] usbcore: registered new interface driver hub [ 3.604000] usbcore: registered new device driver usb [ 3.604000] USB Universal Host Controller Interface driver v3.0 [ 3.604000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 3.604000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.604000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.604000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.604000] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 [ 3.604000] usb usb1: configuration #1 chosen from 1 choice [ 3.604000] hub 1-0:1.0: USB hub found [ 3.604000] hub 1-0:1.0: 2 ports detected [ 3.616000] SCSI subsystem initialized [ 3.620000] libata version 2.21 loaded. [ 3.640000] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 3.640000] Copyright (c) 1999-2006 Intel Corporation. [ 3.708000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21 [ 3.708000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.708000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.708000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 3.708000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 [ 3.708000] usb usb2: configuration #1 chosen from 1 choice [ 3.708000] hub 2-0:1.0: USB hub found [ 3.708000] hub 2-0:1.0: 2 ports detected [ 3.812000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22 [ 3.812000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.812000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.812000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 3.812000] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840 [ 3.812000] usb usb3: configuration #1 chosen from 1 choice [ 3.812000] hub 3-0:1.0: USB hub found [ 3.812000] hub 3-0:1.0: 2 ports detected [ 3.916000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23 [ 3.916000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 3.916000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.916000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 3.916000] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 [ 3.916000] usb usb4: configuration #1 chosen from 1 choice [ 3.916000] hub 4-0:1.0: USB hub found [ 3.916000] hub 4-0:1.0: 2 ports detected [ 3.948000] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 4.000000] Clocksource tsc unstable (delta = -198258096 ns) [ 4.020000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 4.020000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 4.020000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23 [ 4.020000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 4.020000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.020000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 4.020000] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.020000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 4.020000] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee404000 [ 4.064000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.064000] usb usb5: configuration #1 chosen from 1 choice [ 4.064000] hub 5-0:1.0: USB hub found [ 4.064000] hub 5-0:1.0: 8 ports detected [ 4.076000] e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:41:57:04:b1 [ 4.136000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 4.168000] ahci 0000:00:1f.2: version 2.2 [ 4.168000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 [ 4.472000] usb 1-1: device not accepting address 2, error -71 [ 5.172000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode [ 5.172000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 5.172000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 5.172000] scsi0 : ahci [ 5.172000] scsi1 : ahci [ 5.172000] scsi2 : ahci [ 5.172000] scsi3 : ahci [ 5.172000] ata1: SATA max UDMA/133 cmd 0xf8872500 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 5.172000] ata2: SATA max UDMA/133 cmd 0xf8872580 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 5.172000] ata3: SATA max UDMA/133 cmd 0xf8872600 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 5.172000] ata4: SATA max UDMA/133 cmd 0xf8872680 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 5.656000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.656000] ata1.00: ATA-7: FUJITSU MHV2080BH, 00840028, max UDMA/100 [ 5.656000] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (not used) [ 5.656000] ata1.00: configured for UDMA/100 [ 5.688000] usb 1-1: new low speed USB device using uhci_hcd and address 4 [ 5.876000] usb 1-1: configuration #1 chosen from 1 choice [ 5.972000] ata2: SATA link down (SStatus 0 SControl 0) [ 6.120000] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 6.284000] ata3: SATA link down (SStatus 0 SControl 0) [ 6.288000] usb 4-1: configuration #1 chosen from 1 choice [ 6.532000] usb 4-2: new full speed USB device using uhci_hcd and address 3 [ 6.596000] ata4: SATA link down (SStatus 0 SControl 0) [ 6.596000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 0084 PQ: 0 ANSI: 5 [ 6.596000] ata_piix 0000:00:1f.1: version 2.11 [ 6.596000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 [ 6.596000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 6.596000] scsi4 : ata_piix [ 6.596000] scsi5 : ata_piix [ 6.600000] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14 [ 6.600000] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15 [ 6.604000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 6.604000] sd 0:0:0:0: [sda] Write Protect is off [ 6.604000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.604000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.604000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 6.604000] sd 0:0:0:0: [sda] Write Protect is off [ 6.604000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.604000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.604000] sda: sda1 sda2 sda3 < sda5<6>usb 4-2: configuration #1 chosen from 1 choice [ 6.708000] usbcore: registered new interface driver hiddev [ 6.716000] sda6 sda7 > [ 6.720000] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.724000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.740000] input: Microsoft Microsoft IntelliMouse® Explorer as /class/input/input2 [ 6.740000] input: USB HID v1.11 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:1d.0-1 [ 6.740000] usbcore: registered new interface driver usbhid [ 6.740000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 6.920000] ata5.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, 0X05, max UDMA/33 [ 7.092000] ata5.00: configured for UDMA/33 [ 7.092000] ata6: port disabled. ignoring. [ 7.096000] scsi 4:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4246N 0X05 PQ: 0 ANSI: 5 [ 7.096000] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 7.116000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 7.116000] Uniform CD-ROM driver Revision: 3.20 [ 7.116000] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 7.256000] Attempting manual resume [ 7.256000] swsusp: Resume From Partition 8:6 [ 7.256000] PM: Checking swsusp image. [ 7.256000] PM: Resume from disk failed. [ 7.268000] EXT3-fs: INFO: recovery required on readonly filesystem. [ 7.268000] EXT3-fs: write access will be enabled during recovery. [ 10.504000] kjournald starting. Commit interval 5 seconds [ 10.504000] EXT3-fs: recovery complete. [ 10.516000] EXT3-fs: mounted filesystem with ordered data mode. [ 16.664000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX [ 16.664000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO [ 18.752000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 18.764000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 19.148000] input: PC Speaker as /class/input/input3 [ 19.228000] ieee80211_crypt: registered algorithm 'NULL' [ 19.236000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 19.236000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 19.332000] Linux agpgart interface v0.102 (c) Dave Jones [ 19.432000] iTCO_vendor_support: vendor-support=0 [ 19.484000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 19.484000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 19.484000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 19.544000] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012] [ 19.544000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 19.544000] Yenta: Routing CardBus interrupts to PCI [ 19.544000] Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64 [ 19.560000] irda_init() [ 19.560000] NET: Registered protocol family 23 [ 19.704000] intel_rng: FWH not detected [ 19.736000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1 [ 19.736000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 19.776000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 [ 19.776000] Socket status: 30000007 [ 19.776000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfff [ 19.776000] cs: IO port probe 0xa000-0xdfff: clean. [ 19.776000] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff [ 19.776000] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff [ 19.780000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21 [ 19.780000] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 19.780000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 19.964000] cs: IO port probe 0x100-0x3af: clean. [ 19.968000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 19.968000] cs: IO port probe 0x820-0x8ff: clean. [ 19.968000] cs: IO port probe 0xc00-0xcf7: clean. [ 19.968000] cs: IO port probe 0xa00-0xaff: clean. [ 20.048000] Bluetooth: Core ver 2.11 [ 20.048000] NET: Registered protocol family 31 [ 20.048000] Bluetooth: HCI device and connection manager initialized [ 20.048000] Bluetooth: HCI socket layer initialized [ 20.108000] Bluetooth: HCI USB driver ver 2.9 [ 20.108000] usbcore: registered new interface driver hci_usb [ 20.264000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [ 20.264000] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 20.284000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21 [ 20.284000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 20.308000] input: SynPS/2 Synaptics TouchPad as /class/input/input4 [ 20.312000] pnp: Device 00:0a activated. [ 20.312000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 20.312000] nsc-ircc, chip->init [ 20.312000] nsc-ircc, Found chip at base=0x164e [ 20.312000] nsc-ircc, driver loaded (Dag Brattli) [ 20.312000] IrDA: Registered device irda0 [ 20.312000] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 21.008000] lp: driver loaded but no devices found [ 21.364000] Adding 529160k swap on /dev/sda6. Priority:-1 extents:1 across:529160k [ 21.916000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) [ 22.196000] EXT3 FS on sda7, internal journal [ 22.360000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 22.368000] Netfilter messages via NETLINK v0.30. [ 22.388000] nf_conntrack version 0.5.0 (8182 buckets, 65456 max) [ 26.076000] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 26.308000] input: TPPS/2 IBM TrackPoint as /class/input/input5 [ 26.920000] tun: Universal TUN/TAP device driver, 1.6 [ 26.920000] tun: (C) 1999-2004 Max Krasnyansky [ 26.960000] device vbox0 entered promiscuous mode [ 26.960000] audit(1192705422.137:3): dev=vbox0 prom=256 old_prom=0 auid=4294967295 [ 28.948000] ACPI: AC Adapter [AC] (on-line) [ 29.004000] ACPI: Battery Slot [BAT0] (battery present) [ 29.020000] ACPI: ACPI Dock Station Driver [ 29.020000] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay [ 29.020000] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler [ 29.024000] ACPI: Error installing bay notify handler [ 29.024000] ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added [ 29.044000] input: Power Button (FF) as /class/input/input6 [ 29.044000] ACPI: Power Button (FF) [PWRF] [ 29.044000] input: Lid Switch as /class/input/input7 [ 29.044000] ACPI: Lid Switch [LID] [ 29.044000] input: Sleep Button (CM) as /class/input/input8 [ 29.044000] ACPI: Sleep Button (CM) [SLPB] [ 29.224000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 29.224000] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 34.588000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 34.588000] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 34.588000] thinkpad_acpi: ThinkPad EC firmware 79HT50WW-1.07 [ 35.796000] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 35.796000] vboxdrv: Successfully done. [ 35.832000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 35.836000] [fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes. [ 35.836000] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0 [ 35.856000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 36.440000] Bluetooth: L2CAP ver 2.8 [ 36.440000] Bluetooth: L2CAP socket layer initialized [ 36.552000] Bluetooth: RFCOMM socket layer initialized [ 36.552000] Bluetooth: RFCOMM TTY layer initialized [ 36.552000] Bluetooth: RFCOMM ver 1.8 [ 36.824000] ppdev: user-space parallel port driver [ 37.564000] audit(1192705433.223:4): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5659 profile="/usr/sbin/cupsd" [ 37.884000] [fglrx] total GART = 130023424 [ 37.884000] [fglrx] free GART = 114032640 [ 37.884000] [fglrx] max single GART = 114032640 [ 37.884000] [fglrx] total LFB = 134086656 [ 37.884000] [fglrx] free LFB = 114143232 [ 37.884000] [fglrx] max single LFB = 114143232 [ 37.884000] [fglrx] total Inv = 0 [ 37.884000] [fglrx] free Inv = 0 [ 37.884000] [fglrx] max single Inv = 0 [ 37.884000] [fglrx] total TIM = 0