[ 0.000000] Linux version 2.6.22-11-generic (buildd@palmer) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Mon Sep 17 03:45:58 GMT 2007 (Ubuntu 2.6.22-11.33-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe90000 (usable) [ 0.000000] BIOS-e820: 000000003fe90000 - 000000003fe9b000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fe9b000 - 000000003ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f7940 [ 0.000000] Entering add_active_range(0, 0, 261776) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261776 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261776 [ 0.000000] On node 0 totalpages: 261776 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32147 pages, LIFO batch:7 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7870, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 3FE934ED, 0040 (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 3FE9AE20, 0074 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: DSDT 3FE93EEB, 6F35 (r1 INTEL CALISTGA 6040000 MSFT 2000002) [ 0.000000] ACPI: FACS 3FE9BFC0, 0040 [ 0.000000] ACPI: APIC 3FE9AE94, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 3FE9AEFC, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 3FE9AF34, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: APIC 3FE9AF70, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 3FE9AFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SSDT 3FE9352D, 04F6 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Built 1 zonelists. Total pages: 259731 [ 0.000000] Kernel command line: root=UUID=1fc1143b-e0ee-4df4-b153-a6ade3468b72 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1733.460 MHz processor. [ 11.140854] Console: colour VGA+ 80x25 [ 11.141146] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 11.141518] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 11.172673] Memory: 1026608k/1047104k available (2017k kernel code, 19876k reserved, 918k data, 364k init, 129600k highmem) [ 11.172683] virtual kernel memory layout: [ 11.172685] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 11.172686] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 11.172687] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 11.172689] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 11.172690] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 11.172691] .data : 0xc02f8436 - 0xc03ddea4 ( 918 kB) [ 11.172692] .text : 0xc0100000 - 0xc02f8436 (2017 kB) [ 11.172696] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 11.172730] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 11.172871] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 11.172876] hpet0: 3 64-bit timers, 14318180 Hz [ 11.253793] Calibrating delay using timer specific routine.. 3470.71 BogoMIPS (lpj=6941431) [ 11.253813] Security Framework v1.0.0 initialized [ 11.253820] SELinux: Disabled at boot. [ 11.253834] Mount-cache hash table entries: 512 [ 11.253945] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 [ 11.253953] monitor/mwait feature present. [ 11.253955] using mwait in idle threads. [ 11.253959] CPU: L1 I cache: 32K, L1 D cache: 32K [ 11.253962] CPU: L2 cache: 2048K [ 11.253964] CPU: Physical Processor ID: 0 [ 11.253966] CPU: Processor Core ID: 0 [ 11.253968] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 [ 11.253979] Compat vDSO mapped to ffffe000. [ 11.253991] Checking 'hlt' instruction... OK. [ 11.269877] SMP alternatives: switching to UP code [ 11.270294] Early unpacking initramfs... done [ 11.584311] ACPI: Core revision 20070126 [ 11.584380] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 11.588586] CPU0: Intel Genuine Intel(R) CPU T2250 @ 1.73GHz stepping 08 [ 11.588604] SMP alternatives: switching to SMP code [ 11.588724] Booting processor 1/1 eip 3000 [ 11.598927] Initializing CPU#1 [ 11.677248] Calibrating delay using timer specific routine.. 3466.84 BogoMIPS (lpj=6933699) [ 11.677255] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 [ 11.677260] monitor/mwait feature present. [ 11.677264] CPU: L1 I cache: 32K, L1 D cache: 32K [ 11.677266] CPU: L2 cache: 2048K [ 11.677268] CPU: Physical Processor ID: 0 [ 11.677270] CPU: Processor Core ID: 1 [ 11.677272] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 [ 11.677801] CPU1: Intel Genuine Intel(R) CPU T2250 @ 1.73GHz stepping 08 [ 11.677824] Total of 2 processors activated (6937.56 BogoMIPS). [ 11.678024] ENABLING IO-APIC IRQs [ 11.678228] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 11.825155] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 11.845147] Brought up 2 CPUs [ 12.073336] migration_cost=71 [ 12.073477] Booting paravirtualized kernel on bare hardware [ 12.073554] Time: 16:47:25 Date: 09/16/107 [ 12.073575] NET: Registered protocol family 16 [ 12.073659] EISA bus registered [ 12.073664] ACPI: bus type pci registered [ 12.098694] PCI: PCI BIOS revision 2.10 entry at 0xfd6f2, last bus=11 [ 12.098696] PCI: Using configuration type 1 [ 12.098698] Setting up standard PCI resources [ 12.101781] ACPI: EC: Look up EC in DSDT [ 12.102385] ACPI: EC: GPE=0x17, ports=0x66, 0x62 [ 12.122917] ACPI: System BIOS is requesting _OSI(Linux) [ 12.122919] ACPI: Please test with "acpi_osi=!Linux" [ 12.122921] Please send dmidecode to linux-acpi@vger.kernel.org [ 12.123321] ACPI: Interpreter enabled [ 12.123323] ACPI: (supports S0 S3 S4 S5) [ 12.123339] ACPI: Using IOAPIC for interrupt routing [ 12.127894] ACPI: EC: GPE=0x17, ports=0x66, 0x62 [ 12.127943] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 12.127953] PCI: Probing PCI hardware (bus 00) [ 12.128691] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 12.128696] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 12.129962] PCI: Transparent bridge - 0000:00:1e.0 [ 12.130123] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 12.130428] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 12.130561] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 12.130687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 12.130811] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 12.130937] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 12.131076] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 12.134935] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 12.135037] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 12.135135] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 12.135232] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 12.135330] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 12.135427] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 12.135526] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 12.135623] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 12.135736] Linux Plug and Play Support v0.97 (c) Adam Belay [ 12.135745] pnp: PnP ACPI init [ 12.135753] ACPI: bus type pnp registered [ 12.137279] pnp: PnP ACPI: found 9 devices [ 12.137282] ACPI: ACPI bus type pnp unregistered [ 12.137285] PnPBIOS: Disabled by ACPI PNP [ 12.137330] PCI: Using ACPI for IRQ routing [ 12.137333] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 12.137338] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 [ 12.137394] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 [ 12.137447] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0 [ 12.137499] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 [ 12.137552] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 [ 12.137605] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1 [ 12.137657] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2 [ 12.137709] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2 [ 12.137762] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2 [ 12.137814] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.3 [ 12.137867] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.3 [ 12.137919] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.3 [ 12.169710] NET: Registered protocol family 8 [ 12.169712] NET: Registered protocol family 20 [ 12.169779] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 12.169782] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 12.169786] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 12.169789] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 12.169795] pnp: 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved [ 12.172624] Time: tsc clocksource has been installed. [ 12.172639] Switched to high resolution mode on CPU 0 [ 12.172723] Switched to high resolution mode on CPU 1 [ 12.200119] PCI: Bridge: 0000:00:01.0 [ 12.200122] IO window: 2000-2fff [ 12.200126] MEM window: c8100000-c81fffff [ 12.200129] PREFETCH window: d0000000-d7ffffff [ 12.200144] PCI: Bridge: 0000:00:1c.0 [ 12.200146] IO window: disabled. [ 12.200152] MEM window: 54000000-540fffff [ 12.200157] PREFETCH window: disabled. [ 12.200162] PCI: Bridge: 0000:00:1c.1 [ 12.200164] IO window: disabled. [ 12.200170] MEM window: disabled. [ 12.200174] PREFETCH window: disabled. [ 12.200180] PCI: Bridge: 0000:00:1c.2 [ 12.200181] IO window: disabled. [ 12.200187] MEM window: disabled. [ 12.200191] PREFETCH window: disabled. [ 12.200197] PCI: Bridge: 0000:00:1c.3 [ 12.200199] IO window: disabled. [ 12.200204] MEM window: disabled. [ 12.200209] PREFETCH window: disabled. [ 12.200217] PCI: Bus 11, cardbus bridge: 0000:0a:09.0 [ 12.200219] IO window: 00003400-000034ff [ 12.200225] IO window: 00003800-000038ff [ 12.200231] PREFETCH window: 50000000-53ffffff [ 12.200236] MEM window: 58000000-5bffffff [ 12.200241] PCI: Bridge: 0000:00:1e.0 [ 12.200245] IO window: 3000-3fff [ 12.200251] MEM window: c8300000-c83fffff [ 12.200256] PREFETCH window: 50000000-53ffffff [ 12.200272] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 12.200278] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 12.200300] PCI: Enabling device 0000:00:1c.0 (0000 -> 0002) [ 12.200305] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 12.200313] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 12.200336] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 12.200344] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 12.200368] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 12.200376] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 12.200400] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 12.200408] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 12.200422] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 12.200441] ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 12.200455] NET: Registered protocol family 2 [ 12.244512] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 12.244568] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 12.245589] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 12.245958] TCP: Hash tables configured (established 131072 bind 65536) [ 12.245960] TCP reno registered [ 12.260618] checking if image is initramfs... it is [ 12.883012] Freeing initrd memory: 6970k freed [ 12.883129] Simple Boot Flag at 0x3e set to 0x1 [ 12.883619] audit: initializing netlink socket (disabled) [ 12.883636] audit(1192553245.376:1): initialized [ 12.883755] highmem bounce pool size: 64 pages [ 12.885685] VFS: Disk quotas dquot_6.5.1 [ 12.885735] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 12.885829] io scheduler noop registered [ 12.885832] io scheduler anticipatory registered [ 12.885834] io scheduler deadline registered [ 12.885848] io scheduler cfq registered (default) [ 12.885958] Boot video device is 0000:01:00.0 [ 12.886042] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 12.886080] assign_interrupt_mode Found MSI capability [ 12.886112] Allocate Port Service[0000:00:01.0:pcie00] [ 12.886193] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 12.886251] assign_interrupt_mode Found MSI capability [ 12.886298] Allocate Port Service[0000:00:1c.0:pcie00] [ 12.886328] Allocate Port Service[0000:00:1c.0:pcie02] [ 12.886426] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 12.886485] assign_interrupt_mode Found MSI capability [ 12.886531] Allocate Port Service[0000:00:1c.1:pcie00] [ 12.886566] Allocate Port Service[0000:00:1c.1:pcie02] [ 12.886663] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 12.886721] assign_interrupt_mode Found MSI capability [ 12.886768] Allocate Port Service[0000:00:1c.2:pcie00] [ 12.886800] Allocate Port Service[0000:00:1c.2:pcie02] [ 12.886898] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 12.886956] assign_interrupt_mode Found MSI capability [ 12.887002] Allocate Port Service[0000:00:1c.3:pcie00] [ 12.887032] Allocate Port Service[0000:00:1c.3:pcie02] [ 12.887235] isapnp: Scanning for PnP cards... [ 13.240857] isapnp: No Plug & Play device found [ 13.263045] Real Time Clock Driver v1.12ac [ 13.263302] hpet_resources: 0xfed00000 is busy [ 13.263334] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 13.264398] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 13.264613] input: Macintosh mouse button emulation as /class/input/input0 [ 13.264685] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 13.267209] i8042.c: Detected active multiplexing controller, rev 1.1. [ 13.269144] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 13.269148] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 13.269150] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 13.269153] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 13.269156] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 13.269324] mice: PS/2 mouse device common for all mice [ 13.269521] EISA: Probing bus 0 at eisa.0 [ 13.269530] Cannot allocate resource for EISA slot 1 [ 13.269533] Cannot allocate resource for EISA slot 2 [ 13.269536] Cannot allocate resource for EISA slot 3 [ 13.269558] EISA: Detected 0 cards. [ 13.269648] TCP cubic registered [ 13.269663] NET: Registered protocol family 1 [ 13.269685] Using IPI No-Shortcut mode [ 13.269841] Magic number: 11:160:793 [ 13.269943] hash matches device ptyr1 [ 13.270177] Freeing unused kernel memory: 364k freed [ 13.348704] input: AT Translated Set 2 keyboard as /class/input/input1 [ 14.465249] AppArmor: AppArmor initialized<5>audit(1192553246.876:2): info="AppArmor initialized" pid=1233 [ 14.473201] fuse init (API version 7.8) [ 14.478489] Failure registering capabilities with primary security module. [ 14.502989] ACPI: SSDT 3FE93C78, 01EA (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 14.503206] ACPI: SSDT 3FE93A23, 01D0 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 14.503474] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 14.503479] ACPI: Processor [CPU0] (supports 8 throttling states) [ 14.503710] ACPI: SSDT 3FE93E62, 0089 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 14.503908] ACPI: SSDT 3FE93BF3, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 14.504213] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 14.504218] ACPI: Processor [CPU1] (supports 8 throttling states) [ 14.507849] ACPI: Thermal Zone [THRM] (63 C) [ 3.220000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.224000] Time: hpet clocksource has been installed. [ 3.620000] usbcore: registered new interface driver usbfs [ 3.620000] usbcore: registered new interface driver hub [ 3.620000] usbcore: registered new device driver usb [ 3.620000] USB Universal Host Controller Interface driver v3.0 [ 3.620000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 [ 3.620000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.620000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.620000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.620000] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001800 [ 3.620000] usb usb1: configuration #1 chosen from 1 choice [ 3.620000] hub 1-0:1.0: USB hub found [ 3.620000] hub 1-0:1.0: 2 ports detected [ 3.652000] SCSI subsystem initialized [ 3.656000] libata version 2.21 loaded. [ 3.724000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 3.724000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.724000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.724000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 3.724000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 3.724000] usb usb2: configuration #1 chosen from 1 choice [ 3.724000] hub 2-0:1.0: USB hub found [ 3.724000] hub 2-0:1.0: 2 ports detected [ 3.744000] 8139too Fast Ethernet driver 0.9.28 [ 3.828000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 3.828000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.828000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.828000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 3.828000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 3.828000] usb usb3: configuration #1 chosen from 1 choice [ 3.828000] hub 3-0:1.0: USB hub found [ 3.828000] hub 3-0:1.0: 2 ports detected [ 3.932000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 3.932000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 3.932000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.932000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 3.932000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 [ 3.932000] usb usb4: configuration #1 chosen from 1 choice [ 3.932000] hub 4-0:1.0: USB hub found [ 3.932000] hub 4-0:1.0: 2 ports detected [ 4.000000] Clocksource tsc unstable (delta = -171413654 ns) [ 4.036000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21 [ 4.036000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 4.036000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.036000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 4.036000] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.036000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 4.036000] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xc8004000 [ 4.040000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.040000] usb usb5: configuration #1 chosen from 1 choice [ 4.040000] hub 5-0:1.0: USB hub found [ 4.040000] hub 5-0:1.0: 8 ports detected [ 4.144000] ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 4.144000] eth0: RealTek RTL8139 at 0xf8862000, 00:16:36:57:ef:84, IRQ 17 [ 4.144000] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 4.144000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 4.148000] ata_piix 0000:00:1f.1: version 2.11 [ 4.148000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 4.148000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 4.148000] scsi0 : ata_piix [ 4.148000] scsi1 : ata_piix [ 4.148000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14 [ 4.148000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15 [ 4.492000] ata1.00: ATA-6: TOSHIBA MK8032GAX, AD001A, max UDMA/100 [ 4.492000] ata1.00: 156301488 sectors, multi 16: LBA48 [ 4.492000] ata1.01: ATAPI: PIONEER DVD-RW DVR-K16RS, 1.35, max UDMA/33 [ 4.492000] ata1.00: limited to UDMA/33 due to 40-wire cable [ 4.500000] ata1.00: configured for UDMA/33 [ 4.556000] usb 5-6: new high speed USB device using ehci_hcd and address 2 [ 4.688000] ata1.01: configured for UDMA/33 [ 4.728000] usb 5-6: configuration #1 chosen from 1 choice [ 4.852000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8032GA AD00 PQ: 0 ANSI: 5 [ 4.864000] scsi 0:0:1:0: CD-ROM PIONEER DVD-RW DVR-K16RS 1.35 PQ: 0 ANSI: 5 [ 4.868000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 4.868000] sd 0:0:0:0: [sda] Write Protect is off [ 4.868000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.868000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.868000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 4.868000] sd 0:0:0:0: [sda] Write Protect is off [ 4.868000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.868000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.868000] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 4.940000] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.944000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.944000] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 4.992000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.992000] Uniform CD-ROM driver Revision: 3.20 [ 4.992000] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 5.288000] usb 4-2: new low speed USB device using uhci_hcd and address 2 [ 5.292000] Attempting manual resume [ 5.292000] swsusp: Resume From Partition 8:6 [ 5.292000] PM: Checking swsusp image. [ 5.292000] PM: Resume from disk failed. [ 5.336000] kjournald starting. Commit interval 5 seconds [ 5.336000] EXT3-fs: mounted filesystem with ordered data mode. [ 5.464000] usb 4-2: configuration #1 chosen from 1 choice [ 15.412000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 16.496000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 16.548000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.624000] Linux agpgart interface v0.102 (c) Dave Jones [ 16.972000] ACPI: PCI Interrupt 0000:0a:09.2[A] -> GSI 20 (level, low) -> IRQ 20 [ 17.024000] NET: Registered protocol family 10 [ 17.024000] lo: Disabled Privacy Extensions [ 17.120000] iTCO_vendor_support: vendor-support=0 [ 17.120000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 17.124000] Yenta: CardBus bridge found at 0000:0a:09.0 [1025:0102] [ 17.124000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 17.124000] Yenta: Routing CardBus interrupts to PCI [ 17.124000] Yenta TI: socket 0000:0a:09.0, mfunc 0x01321b22, devctl 0x66 [ 17.276000] ieee80211_crypt: registered algorithm 'NULL' [ 17.292000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 17.292000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 17.356000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20 [ 17.356000] Socket status: 30000006 [ 17.356000] Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e [ 17.356000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 17.356000] cs: IO port probe 0x3000-0x3fff: clean. [ 17.356000] pcmcia: parent PCI bridge Memory window: 0xc8300000 - 0xc83fffff [ 17.356000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 17.392000] Linux video capture interface: v2.00 [ 17.424000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1 [ 17.424000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 17.424000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002) [ 17.424000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 17.424000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 17.424000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 17.480000] usbcore: registered new interface driver hiddev [ 17.496000] sdhci: Secure Digital Host Controller Interface driver [ 17.496000] sdhci: Copyright(c) Pierre Ossman [ 17.496000] sdhci: SDHCI controller found at 0000:0a:09.3 [104c:803c] (rev 0) [ 17.496000] ACPI: PCI Interrupt 0000:0a:09.3[A] -> GSI 20 (level, low) -> IRQ 20 [ 17.496000] mmc0: SDHCI at 0xc8300400 irq 20 DMA [ 17.588000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 [ 17.588000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.3-2 [ 17.588000] usbcore: registered new interface driver usbhid [ 17.588000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 17.616000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(VC0321) [ 17.616000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000 [ 17.660000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 17.664000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 17.664000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 17.704000] intel_rng: FWH not detected [ 17.780000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 17.780000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 17.852000] usbcore: registered new interface driver gspca [ 17.852000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered [ 17.904000] cs: IO port probe 0x100-0x3af: clean. [ 17.908000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 17.908000] cs: IO port probe 0x820-0x8ff: clean. [ 17.908000] cs: IO port probe 0xc00-0xcf7: clean. [ 17.908000] cs: IO port probe 0xa00-0xaff: clean. [ 18.416000] lp: driver loaded but no devices found [ 18.520000] Adding 979924k swap on /dev/sda6. Priority:-1 extents:1 across:979924k [ 18.816000] EXT3 FS on sda2, internal journal [ 19.348000] ipw3945: Radio Frequency Kill Switch is On: [ 19.348000] Kill switch must be turned off for wireless networking to work. [ 19.484000] hda_intel: azx_get_response timeout, switching to polling mode... [ 20.708000] kjournald starting. Commit interval 5 seconds [ 20.708000] EXT3 FS on sda3, internal journal [ 20.708000] EXT3-fs: mounted filesystem with ordered data mode. [ 20.736000] kjournald starting. Commit interval 5 seconds [ 20.736000] EXT3 FS on sda5, internal journal [ 20.736000] EXT3-fs: mounted filesystem with ordered data mode. [ 21.652000] ACPI: Battery Slot [BAT1] (battery present) [ 21.832000] ACPI: AC Adapter [ACAD] (on-line) [ 21.844000] No dock devices found. [ 21.888000] input: Power Button (FF) as /class/input/input4 [ 21.888000] ACPI: Power Button (FF) [PWRF] [ 21.892000] input: Lid Switch as /class/input/input5 [ 21.892000] ACPI: Lid Switch [LID] [ 21.920000] input: Power Button (CM) as /class/input/input6 [ 21.920000] ACPI: Power Button (CM) [PWRB] [ 21.936000] input: Sleep Button (CM) as /class/input/input7 [ 21.936000] ACPI: Sleep Button (CM) [SLPB] [ 24.728000] ppdev: user-space parallel port driver [ 24.972000] audit(1192567669.404:3): operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5144 profile="/usr/sbin/cupsd" [ 27.164000] eth0: no IPv6 routers present [ 27.248000] apm: BIOS not found. [ 30.104000] Failure registering capabilities with primary security module. [ 30.328000] Bluetooth: Core ver 2.11 [ 30.328000] NET: Registered protocol family 31 [ 30.328000] Bluetooth: HCI device and connection manager initialized [ 30.328000] Bluetooth: HCI socket layer initialized [ 30.364000] Bluetooth: L2CAP ver 2.8 [ 30.364000] Bluetooth: L2CAP socket layer initialized [ 30.460000] Bluetooth: RFCOMM socket layer initialized [ 30.460000] Bluetooth: RFCOMM TTY layer initialized [ 30.460000] Bluetooth: RFCOMM ver 1.8 [ 33.456000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 33.464000] [fglrx] Maximum main memory to use for locked dma buffers: 927 MBytes. [ 33.464000] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0 [ 33.512000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 35.788000] [fglrx] total GART = 130023424 [ 35.788000] [fglrx] free GART = 114032640 [ 35.788000] [fglrx] max single GART = 114032640 [ 35.788000] [fglrx] total LFB = 134086656 [ 35.788000] [fglrx] free LFB = 119697408 [ 35.788000] [fglrx] max single LFB = 119697408 [ 35.788000] [fglrx] total Inv = 0 [ 35.788000] [fglrx] free Inv = 0 [ 35.788000] [fglrx] max single Inv = 0 [ 35.788000] [fglrx] total TIM = 0 [ 73.140000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (7) [ 73.768000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (9) [ 73.772000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (14) [ 73.772000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (13) [ 73.772000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (16) [ 73.772000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (11) [ 73.772000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (6) [ 2915.068000] atkbd.c: Unknown key pressed (translated set 2, code 0xb4 on isa0060/serio0). [ 2915.068000] atkbd.c: Use 'setkeycodes e034 ' to make it known. [ 2915.124000] atkbd.c: Unknown key released (translated set 2, code 0xb4 on isa0060/serio0). [ 2915.124000] atkbd.c: Use 'setkeycodes e034 ' to make it known.