[ 0.000000] Linux version 2.6.22-12-generic (buildd@vernadsky) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23 18:11:30 GMT 2007 (Ubuntu 2.6.22-12.39-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe81400 (usable) [ 0.000000] BIOS-e820: 000000007fe81400 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved) [ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 523905) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 523905 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 523905 [ 0.000000] On node 0 totalpages: 523905 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292228 pages, LIFO batch:31 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FC0C0, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT 7FE8198A, 0044 (r1 DELL M07 27D7060F ASL 61) [ 0.000000] ACPI: FACP 7FE82800, 0074 (r1 DELL M07 27D7060F ASL 61) [ 0.000000] ACPI: DSDT 7FE83400, 5487 (r1 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 7FE91C00, 0040 [ 0.000000] ACPI: HPET 7FE82F00, 0038 (r1 DELL M07 1 ASL 61) [ 0.000000] ACPI: APIC 7FE83000, 0068 (r1 DELL M07 27D7060F ASL 47) [ 0.000000] ACPI: ASF! 7FE82C00, 005B (r16 DELL M07 27D7060F ASL 61) [ 0.000000] ACPI: MCFG 7FE82FC0, 003E (r16 DELL M07 27D7060F ASL 61) [ 0.000000] ACPI: SLIC 7FE8309C, 0176 (r1 DELL M07 27D7060F ASL 61) [ 0.000000] ACPI: TCPA 7FE83300, 0032 (r1 DELL M07 27D7060F ASL 61) [ 0.000000] ACPI: SSDT 7FE81A11, 04DC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] Built 1 zonelists. Total pages: 519812 [ 0.000000] Kernel command line: root=UUID=5fe06825-8d00-4a40-a692-daab905b0cc6 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1997.342 MHz processor. [ 7.750523] Console: colour VGA+ 80x25 [ 7.750767] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 7.751088] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 7.844295] Memory: 2065968k/2095620k available (2017k kernel code, 28232k reserved, 918k data, 364k init, 1178116k highmem) [ 7.844304] virtual kernel memory layout: [ 7.844305] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 7.844306] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 7.844307] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 7.844308] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 7.844309] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 7.844310] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB) [ 7.844311] .text : 0xc0100000 - 0xc02f8456 (2017 kB) [ 7.844314] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 7.844348] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 7.844475] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 7.844480] hpet0: 3 64-bit timers, 14318180 Hz [ 7.925390] Calibrating delay using timer specific routine.. 3998.75 BogoMIPS (lpj=7997516) [ 7.925411] Security Framework v1.0.0 initialized [ 7.925419] SELinux: Disabled at boot. [ 7.925431] Mount-cache hash table entries: 512 [ 7.925546] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 7.925553] monitor/mwait feature present. [ 7.925555] using mwait in idle threads. [ 7.925559] CPU: L1 I cache: 32K, L1 D cache: 32K [ 7.925561] CPU: L2 cache: 2048K [ 7.925563] CPU: Physical Processor ID: 0 [ 7.925565] CPU: Processor Core ID: 0 [ 7.925566] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 [ 7.925575] Compat vDSO mapped to ffffe000. [ 7.925586] Checking 'hlt' instruction... OK. [ 7.941481] SMP alternatives: switching to UP code [ 7.941896] Early unpacking initramfs... done [ 8.234749] ACPI: Core revision 20070126 [ 8.234802] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 8.237574] CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 [ 8.237590] SMP alternatives: switching to SMP code [ 8.237693] Booting processor 1/1 eip 3000 [ 10.308579] Initializing CPU#1 [ 10.386360] Calibrating delay using timer specific routine.. 3994.71 BogoMIPS (lpj=7989433) [ 10.386366] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 10.386371] monitor/mwait feature present. [ 10.386374] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.386376] CPU: L2 cache: 2048K [ 10.386378] CPU: Physical Processor ID: 0 [ 10.386379] CPU: Processor Core ID: 1 [ 10.386380] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 [ 8.329329] CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 [ 8.329351] Total of 2 processors activated (7993.47 BogoMIPS). [ 8.329545] ENABLING IO-APIC IRQs [ 8.329741] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 8.476730] checking TSC synchronization [CPU#0 -> CPU#1]: [ 8.496710] Measured 4115034540 cycles TSC warp between CPUs, turning off TSC clock. [ 0.524000] Marking TSC unstable due to: check_tsc_sync_source failed. [ 0.528000] Brought up 2 CPUs [ 0.760000] migration_cost=0 [ 0.760000] Booting paravirtualized kernel on bare hardware [ 0.760000] Time: 6:52:21 Date: 03/01/104 [ 0.760000] NET: Registered protocol family 16 [ 0.760000] EISA bus registered [ 0.760000] ACPI: bus type pci registered [ 0.788000] PCI: PCI BIOS revision 2.10 entry at 0xfacc6, last bus=14 [ 0.788000] PCI: Using configuration type 1 [ 0.788000] Setting up standard PCI resources [ 0.792000] ACPI: EC: Look up EC in DSDT [ 0.820000] ACPI Warning (tbutils-0158): Incorrect checksum in table [TCPA] - 00, should be 9B [20070126] [ 0.820000] ACPI: SSDT 7FE819CE, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) [ 0.824000] ACPI: Interpreter enabled [ 0.824000] ACPI: (supports S0 S3 S4 S5) [ 0.824000] ACPI: Using IOAPIC for interrupt routing [ 0.864000] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.864000] PCI: Probing PCI hardware (bus 00) [ 0.864000] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.864000] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 0.868000] PCI: Transparent bridge - 0000:00:1e.0 [ 0.868000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.868000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.868000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.868000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.868000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.868000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT] [ 0.868000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.896000] ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11) [ 0.896000] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7) [ 0.896000] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *7 [ 0.896000] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) [ 0.896000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.896000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.896000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.896000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.896000] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.896000] pnp: PnP ACPI init [ 0.896000] ACPI: bus type pnp registered [ 0.952000] pnp: PnP ACPI: found 15 devices [ 0.952000] ACPI: ACPI bus type pnp unregistered [ 0.952000] PnPBIOS: Disabled by ACPI PNP [ 0.952000] PCI: Using ACPI for IRQ routing [ 0.952000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.996000] NET: Registered protocol family 8 [ 0.996000] NET: Registered protocol family 20 [ 0.996000] pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved [ 0.996000] pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 0.996000] pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 0.996000] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.996000] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.996000] pnp: 00:02: ioport range 0x1000-0x1005 has been reserved [ 0.996000] pnp: 00:02: ioport range 0x1008-0x100f has been reserved [ 0.996000] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved [ 0.996000] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved [ 0.996000] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved [ 0.996000] pnp: 00:03: ioport range 0x1060-0x107f has been reserved [ 0.996000] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved [ 0.996000] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved [ 0.996000] pnp: 00:08: ioport range 0xc80-0xcaf has been reserved [ 0.996000] pnp: 00:08: ioport range 0xcc0-0xcff could not be reserved [ 0.996000] pnp: 00:08: ioport range 0x910-0x91f has been reserved [ 0.996000] pnp: 00:08: ioport range 0x920-0x92f has been reserved [ 0.996000] pnp: 00:08: ioport range 0xcbc-0xcbf has been reserved [ 0.996000] pnp: 00:08: ioport range 0x930-0x97f has been reserved [ 0.996000] pnp: 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.996000] pnp: 00:0e: ioport range 0xcb0-0xcbb has been reserved [ 0.996000] pnp: 00:0e: iomem range 0xfed40000-0xfed44fff could not be reserved [ 1.000000] Time: hpet clocksource has been installed. [ 1.000000] Switched to high resolution mode on CPU 0 [ 1.000000] Switched to high resolution mode on CPU 1 [ 1.028000] PCI: Bridge: 0000:00:01.0 [ 1.028000] IO window: disabled. [ 1.028000] MEM window: ed000000-efefffff [ 1.028000] PREFETCH window: d0000000-dfffffff [ 1.028000] PCI: Bridge: 0000:00:1c.0 [ 1.028000] IO window: disabled. [ 1.028000] MEM window: disabled. [ 1.028000] PREFETCH window: disabled. [ 1.028000] PCI: Bridge: 0000:00:1c.1 [ 1.028000] IO window: disabled. [ 1.028000] MEM window: ecf00000-ecffffff [ 1.028000] PREFETCH window: disabled. [ 1.028000] PCI: Bridge: 0000:00:1c.2 [ 1.028000] IO window: disabled. [ 1.028000] MEM window: ece00000-ecefffff [ 1.028000] PREFETCH window: disabled. [ 1.028000] PCI: Bridge: 0000:00:1c.3 [ 1.028000] IO window: e000-efff [ 1.028000] MEM window: ecc00000-ecdfffff [ 1.028000] PREFETCH window: e0000000-e01fffff [ 1.028000] PCI: Bus 4, cardbus bridge: 0000:03:01.0 [ 1.028000] IO window: 00002000-000020ff [ 1.028000] IO window: 00002400-000024ff [ 1.028000] PREFETCH window: 88000000-8bffffff [ 1.028000] MEM window: 8c000000-8fffffff [ 1.028000] PCI: Bridge: 0000:00:1e.0 [ 1.028000] IO window: 2000-2fff [ 1.028000] MEM window: ecb00000-ecbfffff [ 1.028000] PREFETCH window: 88000000-8bffffff [ 1.028000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.028000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 1.028000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.028000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.028000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 1.028000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 1.028000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 1.028000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 1.028000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 1.028000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 1.028000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 1.028000] PCI: Enabling device 0000:03:01.0 (0000 -> 0003) [ 1.028000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 1.028000] NET: Registered protocol family 2 [ 1.072000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.072000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 1.072000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.072000] TCP: Hash tables configured (established 131072 bind 65536) [ 1.072000] TCP reno registered [ 1.088000] checking if image is initramfs... it is [ 1.668000] Freeing initrd memory: 7111k freed [ 1.672000] audit: initializing netlink socket (disabled) [ 1.672000] audit(1080802341.500:1): initialized [ 1.672000] highmem bounce pool size: 64 pages [ 1.672000] VFS: Disk quotas dquot_6.5.1 [ 1.672000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.672000] io scheduler noop registered [ 1.672000] io scheduler anticipatory registered [ 1.672000] io scheduler deadline registered [ 1.672000] io scheduler cfq registered (default) [ 1.672000] Boot video device is 0000:01:00.0 [ 1.672000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 1.672000] assign_interrupt_mode Found MSI capability [ 1.672000] Allocate Port Service[0000:00:01.0:pcie00] [ 1.672000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.672000] assign_interrupt_mode Found MSI capability [ 1.672000] Allocate Port Service[0000:00:1c.0:pcie00] [ 1.672000] Allocate Port Service[0000:00:1c.0:pcie02] [ 1.672000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 1.672000] assign_interrupt_mode Found MSI capability [ 1.672000] Allocate Port Service[0000:00:1c.1:pcie00] [ 1.672000] Allocate Port Service[0000:00:1c.1:pcie02] [ 1.672000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 1.672000] assign_interrupt_mode Found MSI capability [ 1.672000] Allocate Port Service[0000:00:1c.2:pcie00] [ 1.672000] Allocate Port Service[0000:00:1c.2:pcie02] [ 1.672000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 1.672000] assign_interrupt_mode Found MSI capability [ 1.672000] Allocate Port Service[0000:00:1c.3:pcie00] [ 1.672000] Allocate Port Service[0000:00:1c.3:pcie02] [ 1.672000] isapnp: Scanning for PnP cards... [ 2.028000] isapnp: No Plug & Play device found [ 2.048000] Real Time Clock Driver v1.12ac [ 2.048000] hpet_resources: 0xfed00000 is busy [ 2.048000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 2.048000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.048000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.048000] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.048000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 2.048000] input: Macintosh mouse button emulation as /class/input/input0 [ 2.048000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.052000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.052000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.052000] mice: PS/2 mouse device common for all mice [ 2.052000] EISA: Probing bus 0 at eisa.0 [ 2.052000] EISA: Cannot allocate resource for mainboard [ 2.052000] Cannot allocate resource for EISA slot 1 [ 2.052000] Cannot allocate resource for EISA slot 2 [ 2.052000] EISA: Detected 0 cards. [ 2.052000] TCP cubic registered [ 2.052000] NET: Registered protocol family 1 [ 2.052000] Using IPI No-Shortcut mode [ 2.052000] Magic number: 0:35:872 [ 2.052000] hash matches /build/buildd/linux-source-2.6.22-2.6.22/drivers/base/power/resume.c:57 [ 2.052000] hash matches device ptytd [ 2.052000] Freeing unused kernel memory: 364k freed [ 2.060000] input: AT Translated Set 2 keyboard as /class/input/input1 [ 3.228000] AppArmor: AppArmor initialized<5>audit(1080802343.000:2): type=1505 info="AppArmor initialized" pid=1271 [ 3.232000] fuse init (API version 7.8) [ 3.236000] Failure registering capabilities with primary security module. [ 3.260000] ACPI: SSDT 7FE82138, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 3.260000] ACPI: SSDT 7FE81EED, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 3.260000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 3.260000] ACPI: Processor [CPU0] (supports 8 throttling states) [ 3.260000] ACPI: SSDT 7FE8237C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 3.260000] ACPI: SSDT 7FE820B3, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 3.264000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 3.264000] ACPI: Processor [CPU1] (supports 8 throttling states) [ 3.264000] ACPI: Thermal Zone [THM] (54 C) [ 3.612000] usbcore: registered new interface driver usbfs [ 3.612000] usbcore: registered new interface driver hub [ 3.612000] usbcore: registered new device driver usb [ 3.612000] USB Universal Host Controller Interface driver v3.0 [ 3.612000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 3.612000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.612000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.616000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.616000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80 [ 3.616000] usb usb1: configuration #1 chosen from 1 choice [ 3.616000] hub 1-0:1.0: USB hub found [ 3.616000] hub 1-0:1.0: 2 ports detected [ 3.644000] SCSI subsystem initialized [ 3.660000] libata version 2.21 loaded. [ 3.720000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 3.720000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.720000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.720000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 3.720000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60 [ 3.720000] usb usb2: configuration #1 chosen from 1 choice [ 3.720000] hub 2-0:1.0: USB hub found [ 3.720000] hub 2-0:1.0: 2 ports detected [ 3.824000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 3.824000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.824000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.824000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 3.824000] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40 [ 3.824000] usb usb3: configuration #1 chosen from 1 choice [ 3.824000] hub 3-0:1.0: USB hub found [ 3.824000] hub 3-0:1.0: 2 ports detected [ 3.928000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23 [ 3.928000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 3.928000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.928000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 3.928000] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20 [ 3.928000] usb usb4: configuration #1 chosen from 1 choice [ 3.928000] hub 4-0:1.0: USB hub found [ 3.928000] hub 4-0:1.0: 2 ports detected [ 3.960000] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 4.000000] Clocksource tsc unstable (delta = -177291536 ns) [ 4.032000] tg3.c:v3.77 (May 31, 2007) [ 4.032000] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 4.032000] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 4.052000] eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:c5:1c:38:b2 [ 4.052000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 4.052000] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 4.052000] ata_piix 0000:00:1f.2: version 2.11 [ 4.052000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 4.052000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 4.052000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 4.052000] scsi0 : ata_piix [ 4.052000] scsi1 : ata_piix [ 4.052000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14 [ 4.052000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15 [ 4.104000] usb 1-2: configuration #1 chosen from 1 choice [ 4.108000] hub 1-2:1.0: USB hub found [ 4.108000] hub 1-2:1.0: 4 ports detected [ 4.228000] ata1.00: ATA-7: Hitachi HTS721080G9SA00, MC4OC10H, max UDMA/100 [ 4.228000] ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 4.244000] ata1.00: configured for UDMA/100 [ 4.464000] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 4.580000] ata2.00: ATAPI: _NEC DVD+/-RW ND-6650A, 102C, max UDMA/33 [ 4.616000] usb 2-1: configuration #1 chosen from 1 choice [ 4.616000] hub 2-1:1.0: USB hub found [ 4.620000] hub 2-1:1.0: 3 ports detected [ 4.752000] ata2.00: configured for UDMA/33 [ 4.752000] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72108 MC4O PQ: 0 ANSI: 5 [ 4.752000] scsi 1:0:0:0: CD-ROM _NEC DVD+-RW ND-6650A 102C PQ: 0 ANSI: 5 [ 4.752000] ACPI: PCI Interrupt 0000:03:01.4[A] -> GSI 19 (level, low) -> IRQ 19 [ 4.804000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 4.804000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 4.804000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.804000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 4.804000] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.804000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 4.804000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000 [ 4.808000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.808000] usb usb5: configuration #1 chosen from 1 choice [ 4.808000] hub 5-0:1.0: USB hub found [ 4.808000] hub 5-0:1.0: 8 ports detected [ 4.808000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[ecbff000-ecbff7ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 4.932000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 4.932000] sd 0:0:0:0: [sda] Write Protect is off [ 4.932000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.932000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.932000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 4.932000] sd 0:0:0:0: [sda] Write Protect is off [ 4.932000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.932000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.932000] sda:<3>hub 1-2:1.0: hub_port_status failed (err = -71) [ 4.964000] hub 1-2:1.0: hub_port_status failed (err = -71) [ 4.964000] hub 1-2:1.0: hub_port_status failed (err = -71) [ 4.968000] hub 1-2:1.0: hub_port_status failed (err = -71) [ 4.968000] hub 2-1:1.0: hub_port_status failed (err = -71) [ 4.968000] hub 2-1:1.0: hub_port_status failed (err = -71) [ 4.968000] hub 2-1:1.0: hub_port_status failed (err = -71) [ 4.968000] usb 2-1: USB disconnect, address 2 [ 5.260000] sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > [ 5.308000] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.312000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.312000] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.316000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 5.316000] Uniform CD-ROM driver Revision: 3.20 [ 5.316000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.344000] usb 5-2: new high speed USB device using ehci_hcd and address 2 [ 5.484000] usb 5-2: configuration #1 chosen from 1 choice [ 5.484000] hub 5-2:1.0: USB hub found [ 5.484000] hub 5-2:1.0: 4 ports detected [ 5.592000] Attempting manual resume [ 5.592000] swsusp: Resume From Partition 8:5 [ 5.592000] PM: Checking swsusp image. [ 5.592000] PM: Resume from disk failed. [ 5.604000] EXT3-fs: INFO: recovery required on readonly filesystem. [ 5.604000] EXT3-fs: write access will be enabled during recovery. [ 6.072000] usb 5-8: new high speed USB device using ehci_hcd and address 4 [ 6.084000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[384fc0001e5d2850] [ 6.204000] usb 5-8: configuration #1 chosen from 1 choice [ 6.204000] hub 5-8:1.0: USB hub found [ 6.204000] hub 5-8:1.0: 4 ports detected [ 6.308000] usb 1-2: USB disconnect, address 2 [ 6.676000] usb 2-1: new full speed USB device using uhci_hcd and address 3 [ 6.828000] usb 2-1: configuration #1 chosen from 1 choice [ 6.828000] hub 2-1:1.0: USB hub found [ 6.832000] hub 2-1:1.0: 3 ports detected [ 7.140000] usb 5-8.2: new high speed USB device using ehci_hcd and address 5 [ 7.232000] usb 5-8.2: configuration #1 chosen from 1 choice [ 7.232000] hub 5-8.2:1.0: USB hub found [ 7.232000] hub 5-8.2:1.0: 4 ports detected [ 7.540000] usb 2-1.2: new full speed USB device using uhci_hcd and address 4 [ 7.656000] usb 2-1.2: configuration #1 chosen from 1 choice [ 7.860000] usb 5-8.2.3: new full speed USB device using ehci_hcd and address 6 [ 7.952000] usb 5-8.2.3: configuration #1 chosen from 1 choice [ 7.952000] hub 5-8.2.3:1.0: USB hub found [ 7.952000] hub 5-8.2.3:1.0: 4 ports detected [ 8.112000] kjournald starting. Commit interval 5 seconds [ 8.112000] EXT3-fs: sda8: orphan cleanup on readonly fs [ 8.112000] ext3_orphan_cleanup: deleting unreferenced inode 98197 [ 8.124000] ext3_orphan_cleanup: deleting unreferenced inode 897643 [ 8.124000] EXT3-fs: sda8: 2 orphan inodes deleted [ 8.124000] EXT3-fs: recovery complete. [ 8.200000] EXT3-fs: mounted filesystem with ordered data mode. [ 8.256000] usb 5-8.2.3.3: new low speed USB device using ehci_hcd and address 7 [ 8.352000] usb 5-8.2.3.3: configuration #1 chosen from 1 choice [ 18.468000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 18.472000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 18.772000] Linux agpgart interface v0.102 (c) Dave Jones [ 18.820000] input: PC Speaker as /class/input/input2 [ 18.856000] iTCO_vendor_support: vendor-support=0 [ 18.860000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 18.860000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 18.860000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 19.204000] Yenta: CardBus bridge found at 0000:03:01.0 [1028:01cc] [ 19.204000] Yenta O2: res at 0x94/0xD4: 00/ea [ 19.204000] Yenta O2: enabling read prefetch/write burst [ 19.256000] intel_rng: FWH not detected [ 19.304000] irda_init() [ 19.304000] NET: Registered protocol family 23 [ 19.332000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 19 [ 19.332000] Socket status: 30000006 [ 19.332000] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 19.332000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 19.332000] cs: IO port probe 0x2000-0x2fff: clean. [ 19.332000] pcmcia: parent PCI bridge Memory window: 0xecb00000 - 0xecbfffff [ 19.332000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 19.392000] ieee80211_crypt: registered algorithm 'NULL' [ 19.396000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 19.396000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 19.500000] input: PS/2 Mouse as /class/input/input3 [ 19.508000] nvidia: module license 'NVIDIA' taints kernel. [ 19.520000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input4 [ 19.760000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 19.760000] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 19.760000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9639 Mon Apr 16 20:20:06 PDT 2007 [ 19.792000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1 [ 19.792000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 19.792000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 19.792000] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 19.796000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 19.812000] usbcore: registered new interface driver hiddev [ 19.816000] input: Justcom Technology USB KVM Switch as /class/input/input5 [ 19.816000] input: USB HID v1.10 Keyboard [Justcom Technology USB KVM Switch] on usb-0000:00:1d.7-8.2.3.3 [ 19.816000] input: Justcom Technology USB KVM Switch as /class/input/input6 [ 19.816000] input: USB HID v1.10 Mouse [Justcom Technology USB KVM Switch] on usb-0000:00:1d.7-8.2.3.3 [ 19.816000] usbcore: registered new interface driver usbhid [ 19.816000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 20.116000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 20.116000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 20.156000] cs: IO port probe 0x100-0x3af: excluding 0x280-0x287 [ 20.156000] cs: IO port probe 0x3e0-0x4ff: clean. [ 20.156000] cs: IO port probe 0x820-0x8ff: clean. [ 20.160000] cs: IO port probe 0xc00-0xcf7: clean. [ 20.160000] cs: IO port probe 0xa00-0xaff: clean. [ 20.896000] lp: driver loaded but no devices found [ 20.992000] Adding 2096440k swap on /dev/sda5. Priority:-1 extents:1 across:2096440k [ 21.432000] EXT3 FS on sda8, internal journal [ 21.720000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels) [ 23.172000] kjournald starting. Commit interval 5 seconds [ 23.180000] EXT3 FS on sda7, internal journal [ 23.180000] EXT3-fs: mounted filesystem with ordered data mode. [ 25.584000] ACPI: Battery Slot [BAT0] (battery present) [ 25.584000] ACPI: Battery Slot [BAT1] (battery absent) [ 25.696000] ACPI: AC Adapter [AC] (on-line) [ 25.708000] ACPI: ACPI Dock Station Driver [ 25.832000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 25.832000] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 25.832000] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 25.844000] input: Lid Switch as /class/input/input7 [ 25.844000] ACPI: Lid Switch [LID] [ 25.844000] input: Power Button (CM) as /class/input/input8 [ 25.844000] ACPI: Power Button (CM) [PBTN] [ 25.848000] input: Sleep Button (CM) as /class/input/input9 [ 25.848000] ACPI: Sleep Button (CM) [SBTN] [ 25.888000] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay [ 25.888000] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler [ 25.888000] ACPI: Error installing bay notify handler [ 25.888000] ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added [ 27.708000] PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100506, writing 100106) [ 27.788000] NET: Registered protocol family 10 [ 27.832000] lo: Disabled Privacy Extensions [ 27.832000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.888000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 28.108000] ppdev: user-space parallel port driver [ 28.664000] audit(1080795168.784:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5484 profile="/usr/sbin/cupsd" [ 28.812000] apm: BIOS not found. [ 29.384000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 29.408000] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 29.408000] tg3: eth0: Flow control is on for TX and on for RX. [ 29.412000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 29.536000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 29.548000] NFSD: starting 90-second grace period [ 30.632000] Failure registering capabilities with primary security module. [ 30.836000] Bluetooth: Core ver 2.11 [ 30.836000] NET: Registered protocol family 31 [ 30.836000] Bluetooth: HCI device and connection manager initialized [ 30.836000] Bluetooth: HCI socket layer initialized [ 30.848000] Bluetooth: L2CAP ver 2.8 [ 30.848000] Bluetooth: L2CAP socket layer initialized [ 30.956000] Bluetooth: RFCOMM socket layer initialized [ 30.956000] Bluetooth: RFCOMM TTY layer initialized [ 30.956000] Bluetooth: RFCOMM ver 1.8 [ 31.760000] usb 5-8.2.3.1: new low speed USB device using ehci_hcd and address 8 [ 31.860000] usb 5-8.2.3.1: configuration #1 chosen from 1 choice [ 31.864000] input: G-Tech CHINA USB Wireless Mouse & KeyBoard V1.01 as /class/input/input10 [ 31.864000] input: USB HID v1.00 Keyboard [G-Tech CHINA USB Wireless Mouse & KeyBoard V1.01 ] on usb-0000:00:1d.7-8.2.3.1 [ 31.876000] input: G-Tech CHINA USB Wireless Mouse & KeyBoard V1.01 as /class/input/input11 [ 31.876000] input: USB HID v1.00 Mouse [G-Tech CHINA USB Wireless Mouse & KeyBoard V1.01 ] on usb-0000:00:1d.7-8.2.3.1 [ 35.400000] NET: Registered protocol family 17 [ 50.180000] eth0: no IPv6 routers present