[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe90000 (usable) [ 0.000000] BIOS-e820: 000000007fe90000 - 000000007fe9c000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fe9c000 - 000000007ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f7690 [ 0.000000] Entering add_active_range(0, 0, 523920) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 523920 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 523920 [ 0.000000] On node 0 totalpages: 523920 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292243 pages, LIFO batch:31 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F75D0 checksum 0 [ 0.000000] ACPI: RSDP 000F75D0, 0024 (r2 TOSQCI) [ 0.000000] ACPI: XSDT 7FE91FF6, 0074 (r1 TOSQCI TOSQCI00 6040000 LTP 0) [ 0.000000] ACPI: FACP 7FE9BC2A, 00F4 (r3 TOSQCI TOSQCI00 6040000 ALAN 1) [ 0.000000] ACPI: DSDT 7FE9305C, 8B5A (r1 TOSQCI Denver 6040000 MSFT 3000001) [ 0.000000] ACPI: FACS 7FE9CFC0, 0040 [ 0.000000] ACPI: APIC 7FE9BD1E, 0068 (r1 TOSQCI TOSQCI00 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 7FE9BD86, 0038 (r1 TOSQCI TOSQCI00 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 7FE9BDBE, 003C (r1 TOSQCI TOSQCI00 6040000 LOHR 5A) [ 0.000000] ACPI: APIC 7FE9BDFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7FE9BE62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC 7FE9BE8A, 0176 (r1 TOSQCI TOSQCI00 6040000 LTP 0) [ 0.000000] ACPI: SSDT 7FE925F6, 025F (r1 PmRef Cpu0Tst 3000 INTL 20060912) [ 0.000000] ACPI: SSDT 7FE92550, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20060912) [ 0.000000] ACPI: SSDT 7FE9206A, 04E6 (r1 PmRef CpuPm 3000 INTL 20060912) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] Built 1 zonelists. Total pages: 519827 [ 0.000000] Kernel command line: root=UUID=9301152c-b72c-4a3f-be63-fc9da22e5a67 ro quiet splash locale=fr_FR [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1672.218 MHz processor. [ 16.961040] Console: colour VGA+ 80x25 [ 16.961310] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 16.961605] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 17.056320] Memory: 2066220k/2095680k available (2015k kernel code, 28200k reserved, 916k data, 364k init, 1178176k highmem) [ 17.056329] virtual kernel memory layout: [ 17.056330] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 17.056332] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 17.056333] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 17.056334] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 17.056335] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 17.056336] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 17.056337] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 17.056340] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 17.056379] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 17.056529] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 17.056534] hpet0: 3 64-bit timers, 14318180 Hz [ 17.137504] Calibrating delay using timer specific routine.. 3348.09 BogoMIPS (lpj=6696198) [ 17.137527] Security Framework v1.0.0 initialized [ 17.137533] SELinux: Disabled at boot. [ 17.137545] Mount-cache hash table entries: 512 [ 17.137673] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001 [ 17.137681] monitor/mwait feature present. [ 17.137683] using mwait in idle threads. [ 17.137688] CPU: L1 I cache: 32K, L1 D cache: 32K [ 17.137690] CPU: L2 cache: 2048K [ 17.137692] CPU: Physical Processor ID: 0 [ 17.137694] CPU: Processor Core ID: 0 [ 17.137696] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001 [ 17.137706] Compat vDSO mapped to ffffe000. [ 17.137719] Checking 'hlt' instruction... OK. [ 17.153603] SMP alternatives: switching to UP code [ 17.154038] Early unpacking initramfs... done [ 17.482699] ACPI: Core revision 20070126 [ 17.482704] Toshiba Satellite P100 detected: requires not _OSI(Linux) [ 17.482707] ACPI: Disabled _OSI(Linux) [ 17.482758] ACPI: Looking for DSDT in initramfs... successfully read 31961 bytes from /DSDT.aml. [ 17.482784] ACPI: Table DSDT replaced by host OS [ 17.482788] ACPI: DSDT 00000000, 7CD9 (r1 TOSQCI Denver 6040000 INTL 20061109) [ 17.497011] CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06 [ 17.497026] SMP alternatives: switching to SMP code [ 17.497105] Booting processor 1/1 eip 3000 [ 17.507320] Initializing CPU#1 [ 17.585216] Calibrating delay using timer specific routine.. 3344.35 BogoMIPS (lpj=6688717) [ 17.585223] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001 [ 17.585228] monitor/mwait feature present. [ 17.585231] CPU: L1 I cache: 32K, L1 D cache: 32K [ 17.585232] CPU: L2 cache: 2048K [ 17.585235] CPU: Physical Processor ID: 0 [ 17.585236] CPU: Processor Core ID: 1 [ 17.585238] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001 [ 17.585835] CPU1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06 [ 17.585857] Total of 2 processors activated (6692.45 BogoMIPS). [ 17.586049] ENABLING IO-APIC IRQs [ 17.586250] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 17.733215] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 17.753217] Brought up 2 CPUs [ 17.909860] migration_cost=94 [ 17.909987] Booting paravirtualized kernel on bare hardware [ 17.910073] Time: 23:57:45 Date: 09/22/107 [ 17.910092] NET: Registered protocol family 16 [ 17.910173] EISA bus registered [ 17.910177] ACPI: bus type pci registered [ 17.935285] PCI: PCI BIOS revision 2.10 entry at 0xfd704, last bus=11 [ 17.935287] PCI: Using configuration type 1 [ 17.935289] Setting up standard PCI resources [ 17.938337] ACPI: EC: Look up EC in DSDT [ 17.939058] ACPI: EC: GPE=0x17, ports=0x66, 0x62 [ 18.017240] ACPI: Interpreter enabled [ 18.017243] ACPI: (supports S0 S3 S4 S5) [ 18.017258] ACPI: Using IOAPIC for interrupt routing [ 18.031473] ACPI: EC: GPE=0x17, ports=0x66, 0x62 [ 18.031529] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 18.031537] PCI: Probing PCI hardware (bus 00) [ 18.032251] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 18.032255] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 18.033437] PCI: Firmware left 0000:0a:08.0 e100 interrupts enabled, disabling [ 18.033533] PCI: Transparent bridge - 0000:00:1e.0 [ 18.033680] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 18.033973] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 18.034109] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 18.034241] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 18.034373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 18.034518] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 18.043303] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 18.043418] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 18.043524] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 18.043628] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 18.043733] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 18.043837] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 18.043942] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 18.044047] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 18.044177] Linux Plug and Play Support v0.97 (c) Adam Belay [ 18.044187] pnp: PnP ACPI init [ 18.044194] ACPI: bus type pnp registered [ 18.046558] pnp: PnP ACPI: found 9 devices [ 18.046561] ACPI: ACPI bus type pnp unregistered [ 18.046564] PnPBIOS: Disabled by ACPI PNP [ 18.046608] PCI: Using ACPI for IRQ routing [ 18.046611] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 18.046616] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 [ 18.046688] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 [ 18.046756] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0 [ 18.046823] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 [ 18.046892] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 [ 18.046959] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1 [ 18.047027] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2 [ 18.047094] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2 [ 18.047162] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2 [ 18.080073] NET: Registered protocol family 8 [ 18.080075] NET: Registered protocol family 20 [ 18.080136] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 18.080140] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 18.080143] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 18.080146] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 18.080152] pnp: 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved [ 18.080907] Time: tsc clocksource has been installed. [ 18.080920] Switched to high resolution mode on CPU 0 [ 18.081004] Switched to high resolution mode on CPU 1 [ 18.110490] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0 [ 18.110561] PCI: Bridge: 0000:00:01.0 [ 18.110563] IO window: 2000-2fff [ 18.110567] MEM window: d0000000-d1ffffff [ 18.110571] PREFETCH window: c0000000-cfffffff [ 18.110574] PCI: Bridge: 0000:00:1c.0 [ 18.110576] IO window: disabled. [ 18.110582] MEM window: disabled. [ 18.110586] PREFETCH window: disabled. [ 18.110603] PCI: Bridge: 0000:00:1c.1 [ 18.110605] IO window: disabled. [ 18.110611] MEM window: 8c000000-8c0fffff [ 18.110615] PREFETCH window: disabled. [ 18.110621] PCI: Bridge: 0000:00:1c.2 [ 18.110622] IO window: disabled. [ 18.110628] MEM window: disabled. [ 18.110632] PREFETCH window: disabled. [ 18.110641] PCI: Bus 11, cardbus bridge: 0000:0a:04.0 [ 18.110643] IO window: 00003400-000034ff [ 18.110648] IO window: 00003800-000038ff [ 18.110653] PREFETCH window: 88000000-8bffffff [ 18.110659] MEM window: 90000000-93ffffff [ 18.110665] PCI: Bridge: 0000:00:1e.0 [ 18.110668] IO window: 3000-3fff [ 18.110674] MEM window: d2000000-d20fffff [ 18.110679] PREFETCH window: 88000000-8bffffff [ 18.110695] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 18.110701] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 18.110724] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 18.110731] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 18.110754] PCI: Enabling device 0000:00:1c.1 (0000 -> 0002) [ 18.110757] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 18.110765] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 18.110789] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 18.110797] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 18.110808] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007) [ 18.110814] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 18.110831] PCI: Enabling device 0000:0a:04.0 (0000 -> 0003) [ 18.110835] ACPI: PCI Interrupt 0000:0a:04.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 18.110844] PCI: Setting latency timer of device 0000:0a:04.0 to 64 [ 18.110854] NET: Registered protocol family 2 [ 18.156835] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 18.156889] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 18.157598] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 18.157850] TCP: Hash tables configured (established 131072 bind 65536) [ 18.157853] TCP reno registered [ 18.172957] checking if image is initramfs... it is [ 18.820716] Freeing initrd memory: 7078k freed [ 18.820830] Simple Boot Flag at 0x36 set to 0x1 [ 18.821322] audit: initializing netlink socket (disabled) [ 18.821339] audit(1193097465.396:1): initialized [ 18.821446] highmem bounce pool size: 64 pages [ 18.823294] VFS: Disk quotas dquot_6.5.1 [ 18.823342] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 18.823430] io scheduler noop registered [ 18.823433] io scheduler anticipatory registered [ 18.823434] io scheduler deadline registered [ 18.823448] io scheduler cfq registered (default) [ 26.815246] 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 [ 26.815369] Boot video device is 0000:01:00.0 [ 26.815452] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 26.815491] assign_interrupt_mode Found MSI capability [ 26.815494] Allocate Port Service[0000:00:01.0:pcie00] [ 26.815574] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 26.815633] assign_interrupt_mode Found MSI capability [ 26.815636] Allocate Port Service[0000:00:1c.0:pcie00] [ 26.815665] Allocate Port Service[0000:00:1c.0:pcie02] [ 26.815764] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 26.815823] assign_interrupt_mode Found MSI capability [ 26.815825] Allocate Port Service[0000:00:1c.1:pcie00] [ 26.815857] Allocate Port Service[0000:00:1c.1:pcie02] [ 26.815954] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 26.816013] assign_interrupt_mode Found MSI capability [ 26.816015] Allocate Port Service[0000:00:1c.2:pcie00] [ 26.816045] Allocate Port Service[0000:00:1c.2:pcie02] [ 26.816208] isapnp: Scanning for PnP cards... [ 27.170453] isapnp: No Plug & Play device found [ 27.191904] Real Time Clock Driver v1.12ac [ 27.192127] hpet_resources: 0xfed00000 is busy [ 27.192161] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 27.193253] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 27.193382] input: Macintosh mouse button emulation as /class/input/input0 [ 27.193464] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 27.195072] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 27.195077] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 27.195647] mice: PS/2 mouse device common for all mice [ 27.195750] EISA: Probing bus 0 at eisa.0 [ 27.195758] Cannot allocate resource for EISA slot 1 [ 27.195761] Cannot allocate resource for EISA slot 2 [ 27.195763] Cannot allocate resource for EISA slot 3 [ 27.195786] EISA: Detected 0 cards. [ 27.195869] TCP cubic registered [ 27.195882] NET: Registered protocol family 1 [ 27.195904] Using IPI No-Shortcut mode [ 27.196066] Magic number: 11:561:1010 [ 27.196349] Freeing unused kernel memory: 364k freed [ 27.230998] input: AT Translated Set 2 keyboard as /class/input/input1 [ 28.390662] AppArmor: AppArmor initialized<5>audit(1193097474.896:2): type=1505 info="AppArmor initialized" pid=1240 [ 28.398481] fuse init (API version 7.8) [ 28.403045] Failure registering capabilities with primary security module. [ 28.442596] ACPI: SSDT 7FE92D9E, 01F6 (r1 PmRef Cpu0Ist 3000 INTL 20060912) [ 28.442826] ACPI: SSDT 7FE92855, 04C4 (r1 PmRef Cpu0Cst 3001 INTL 20060912) [ 28.443358] Monitor-Mwait will be used to enter C-1 state [ 28.443361] Monitor-Mwait will be used to enter C-2 state [ 28.443364] Monitor-Mwait will be used to enter C-3 state [ 28.443368] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 28.443592] ACPI: SSDT 7FE92F94, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20060912) [ 28.443804] ACPI: SSDT 7FE92D19, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20060912) [ 28.444377] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 11.264000] Marking TSC unstable due to: possible TSC halt in C2. [ 11.268000] Time: hpet clocksource has been installed. [ 11.276000] ACPI: Thermal Zone [THRM] (60 C) [ 11.724000] usbcore: registered new interface driver usbfs [ 11.724000] usbcore: registered new interface driver hub [ 11.724000] usbcore: registered new device driver usb [ 11.724000] USB Universal Host Controller Interface driver v3.0 [ 11.724000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 11.724000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 11.724000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 11.724000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 11.724000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800 [ 11.724000] usb usb1: configuration #1 chosen from 1 choice [ 11.724000] hub 1-0:1.0: USB hub found [ 11.724000] hub 1-0:1.0: 2 ports detected [ 11.768000] SCSI subsystem initialized [ 11.780000] libata version 2.21 loaded. [ 11.828000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 [ 11.828000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 11.828000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 11.828000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 11.828000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820 [ 11.828000] usb usb2: configuration #1 chosen from 1 choice [ 11.828000] hub 2-0:1.0: USB hub found [ 11.828000] hub 2-0:1.0: 2 ports detected [ 11.840000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 11.840000] e100: Copyright(c) 1999-2006 Intel Corporation [ 11.932000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 11.932000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 11.932000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 11.932000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 11.932000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 11.932000] usb usb3: configuration #1 chosen from 1 choice [ 11.932000] hub 3-0:1.0: USB hub found [ 11.932000] hub 3-0:1.0: 2 ports detected [ 12.000000] Clocksource tsc unstable (delta = -133894321 ns) [ 12.036000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 12.036000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 12.036000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 12.036000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 12.036000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 [ 12.036000] usb usb4: configuration #1 chosen from 1 choice [ 12.036000] hub 4-0:1.0: USB hub found [ 12.036000] hub 4-0:1.0: 2 ports detected [ 12.068000] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 12.140000] PCI: Enabling device 0000:0a:04.1 (0000 -> 0002) [ 12.140000] ACPI: PCI Interrupt 0000:0a:04.1[A] -> GSI 17 (level, low) -> IRQ 17 [ 12.140000] PCI: Setting latency timer of device 0000:0a:04.1 to 64 [ 12.188000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[d2007000-d20077ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 12.188000] ACPI: PCI Interrupt 0000:0a:08.0[A] -> GSI 20 (level, low) -> IRQ 21 [ 12.188000] PCI: Setting latency timer of device 0000:0a:08.0 to 64 [ 12.216000] e100: eth0: e100_probe: addr 0xd2006000, irq 21, MAC addr 00:16:36:DC:A3:49 [ 12.216000] ata_piix 0000:00:1f.2: version 2.11 [ 12.216000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 12.236000] usb 1-1: configuration #1 chosen from 1 choice [ 12.372000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 [ 12.372000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 12.372000] scsi0 : ata_piix [ 12.372000] scsi1 : ata_piix [ 12.372000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14 [ 12.372000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15 [ 12.480000] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 12.536000] ata1.00: ATA-7: FUJITSU MHV2200BT PL, 00000050, max UDMA/100 [ 12.536000] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 12.552000] ata1.00: configured for UDMA/100 [ 12.652000] usb 1-2: configuration #1 chosen from 1 choice [ 12.656000] usbcore: registered new interface driver hiddev [ 12.668000] input: USB Mouse as /class/input/input2 [ 12.668000] input: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1d.0-1 [ 12.668000] usbcore: registered new interface driver usbhid [ 12.668000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 12.668000] usbcore: registered new interface driver libusual [ 12.676000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 12.676000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 12.676000] Initializing USB Mass Storage driver... [ 12.680000] scsi2 : SCSI emulation for USB Mass Storage devices [ 12.680000] usb-storage: device found at 3 [ 12.680000] usb-storage: waiting for device to settle before scanning [ 12.680000] usbcore: registered new interface driver usb-storage [ 12.680000] USB Mass Storage support registered. [ 12.872000] ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.10, max UDMA/33 [ 13.044000] ata2.00: configured for UDMA/33 [ 13.044000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2200B 0000 PQ: 0 ANSI: 5 [ 13.044000] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.10 PQ: 0 ANSI: 5 [ 13.044000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 [ 13.044000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 13.044000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 13.044000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 13.044000] ehci_hcd 0000:00:1d.7: debug port 1 [ 13.044000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 13.044000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xd2404000 [ 13.048000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 13.048000] usb usb5: configuration #1 chosen from 1 choice [ 13.048000] hub 5-0:1.0: USB hub found [ 13.048000] hub 5-0:1.0: 8 ports detected [ 13.088000] usb 1-1: USB disconnect, address 2 [ 13.164000] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 13.164000] sd 0:0:0:0: [sda] Write Protect is off [ 13.164000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.164000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.164000] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 13.164000] sd 0:0:0:0: [sda] Write Protect is off [ 13.164000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.164000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.164000] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8<6>usb 1-2: USB disconnect, address 3 [ 13.228000] sda9 > [ 13.228000] sd 0:0:0:0: [sda] Attached SCSI disk [ 13.232000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 13.232000] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 13.240000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 13.240000] Uniform CD-ROM driver Revision: 3.20 [ 13.240000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 13.776000] usb 5-2: new high speed USB device using ehci_hcd and address 3 [ 13.776000] Attempting manual resume [ 13.776000] swsusp: Resume From Partition 8:9 [ 13.776000] PM: Checking swsusp image. [ 13.776000] PM: Resume from disk failed. [ 13.824000] kjournald starting. Commit interval 5 seconds [ 13.824000] EXT3-fs: mounted filesystem with ordered data mode. [ 13.920000] usb 5-2: configuration #1 chosen from 1 choice [ 13.920000] scsi3 : SCSI emulation for USB Mass Storage devices [ 13.920000] usb-storage: device found at 3 [ 13.920000] usb-storage: waiting for device to settle before scanning [ 14.164000] usb 1-1: new low speed USB device using uhci_hcd and address 4 [ 14.328000] usb 1-1: configuration #1 chosen from 1 choice [ 14.344000] input: USB Mouse as /class/input/input3 [ 14.344000] input: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1d.0-1 [ 18.920000] usb-storage: device scan complete [ 18.920000] scsi 3:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2 [ 18.920000] sd 3:0:0:0: [sdb] 1952256 512-byte hardware sectors (1000 MB) [ 18.920000] sd 3:0:0:0: [sdb] Write Protect is off [ 18.920000] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 18.920000] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 18.924000] sd 3:0:0:0: [sdb] 1952256 512-byte hardware sectors (1000 MB) [ 18.924000] sd 3:0:0:0: [sdb] Write Protect is off [ 18.924000] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 18.924000] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 18.924000] sdb: unknown partition table [ 18.924000] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 18.924000] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 21.788000] iTCO_vendor_support: vendor-support=0 [ 21.792000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 21.792000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 21.792000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 21.860000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 21.864000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.892000] Linux agpgart interface v0.102 (c) Dave Jones [ 21.948000] intel_rng: FWH not detected [ 21.968000] PCI: Enabling device 0000:0a:04.2 (0000 -> 0002) [ 21.968000] ACPI: PCI Interrupt 0000:0a:04.2[A] -> GSI 17 (level, low) -> IRQ 17 [ 21.968000] PCI: Setting latency timer of device 0000:0a:04.2 to 64 [ 22.608000] Yenta: CardBus bridge found at 0000:0a:04.0 [1179:ff31] [ 22.608000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 22.608000] Yenta: Routing CardBus interrupts to PCI [ 22.608000] Yenta TI: socket 0000:0a:04.0, mfunc 0x01a21b22, devctl 0x66 [ 22.676000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0 [ 22.676000] synaptics: Toshiba Satellite P100 detected, limiting rate to 40pps. [ 22.708000] input: SynPS/2 Synaptics TouchPad as /class/input/input4 [ 22.776000] ieee80211_crypt: registered algorithm 'NULL' [ 22.792000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 22.792000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 22.812000] sdhci: Secure Digital Host Controller Interface driver [ 22.812000] sdhci: Copyright(c) Pierre Ossman [ 22.844000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17 [ 22.844000] Socket status: 30000006 [ 22.844000] Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e [ 22.844000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 22.844000] cs: IO port probe 0x3000-0x3fff: clean. [ 22.844000] pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff [ 22.844000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 22.844000] sdhci: SDHCI controller found at 0000:0a:04.3 [104c:803c] (rev 0) [ 22.844000] PCI: Enabling device 0000:0a:04.3 (0000 -> 0002) [ 22.844000] ACPI: PCI Interrupt 0000:0a:04.3[A] -> GSI 17 (level, low) -> IRQ 17 [ 22.844000] PCI: Setting latency timer of device 0000:0a:04.3 to 64 [ 22.844000] mmc0: SDHCI at 0xd2007800 irq 17 DMA [ 22.876000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1 [ 22.876000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 22.876000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002) [ 22.876000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 22.876000] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 22.876000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 23.048000] nvidia: module license 'NVIDIA' taints kernel. [ 23.300000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.300000] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 23.300000] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007 [ 23.376000] cs: IO port probe 0x100-0x3af: clean. [ 23.376000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 23.376000] cs: IO port probe 0xc00-0xcf7: clean. [ 23.380000] cs: IO port probe 0xa00-0xaff: clean. [ 23.528000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 23.528000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 23.960000] lp: driver loaded but no devices found [ 24.024000] Adding 1855468k swap on /dev/sda9. Priority:-1 extents:1 across:1855468k [ 24.476000] EXT3 FS on sda8, internal journal [ 24.808000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels) [ 26.052000] ACPI: AC Adapter [ACAD] (on-line) [ 26.068000] input: Power Button (FF) as /class/input/input5 [ 26.068000] ACPI: Power Button (FF) [PWRF] [ 26.068000] input: Lid Switch as /class/input/input6 [ 26.068000] ACPI: Lid Switch [LID] [ 26.088000] input: Power Button (CM) as /class/input/input7 [ 26.088000] ACPI: Power Button (CM) [PWRB] [ 26.156000] No dock devices found. [ 26.184000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 26.304000] ACPI: Battery Slot [BAT1] (battery present) [ 27.668000] ppdev: user-space parallel port driver [ 27.868000] audit(1193090296.712:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5008 profile="/usr/sbin/cupsd" [ 27.924000] apm: BIOS not found. [ 28.044000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 28.440000] Failure registering capabilities with primary security module. [ 28.708000] Bluetooth: Core ver 2.11 [ 28.708000] NET: Registered protocol family 31 [ 28.708000] Bluetooth: HCI device and connection manager initialized [ 28.708000] Bluetooth: HCI socket layer initialized [ 28.776000] Bluetooth: L2CAP ver 2.8 [ 28.776000] Bluetooth: L2CAP socket layer initialized [ 28.840000] Bluetooth: RFCOMM socket layer initialized [ 28.840000] Bluetooth: RFCOMM TTY layer initialized [ 28.840000] Bluetooth: RFCOMM ver 1.8 [ 33.408000] NET: Registered protocol family 17 [ 37.676000] NET: Registered protocol family 10 [ 37.676000] lo: Disabled Privacy Extensions [ 37.676000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 48.284000] eth0: no IPv6 routers present