[ 0.000000] Linux version 2.6.22-14-rt (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP PREEMPT RT Sun Oct 14 22:53:32 GMT 2007 (Unofficial) [ 0.000000] Command line: root=UUID=474d6f2a-e2ad-4685-9e43-c853b827c221 ro vga=795 quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable) [ 0.000000] BIOS-e820: 000000000009bc00 - 000000000009c000 (reserved) [ 0.000000] BIOS-e820: 00000000000e9b90 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) [ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524208) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FB520 checksum 0 [ 0.000000] ACPI: RSDP 000FB520, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT 7FFB0100, 0044 (r1 A M I OEMXSDT 7000613 MSFT 97) [ 0.000000] ACPI: FACP 7FFB0290, 00F4 (r3 A M I OEMFACP 7000613 MSFT 97) [ 0.000000] ACPI: DSDT 7FFB0440, 6A09 (r1 A0371 A0371001 1 INTL 2002026) [ 0.000000] ACPI: FACS 7FFBE000, 0040 [ 0.000000] ACPI: APIC 7FFB0390, 0070 (r1 A M I OEMAPIC 7000613 MSFT 97) [ 0.000000] ACPI: MCFG 7FFB0400, 003C (r1 A M I OEMMCFG 7000613 MSFT 97) [ 0.000000] ACPI: OEMB 7FFBE040, 0056 (r1 A M I AMI_OEM 7000613 MSFT 97) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007ffb0000 [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524208) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ffb0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 155 [ 0.000000] 0: 256 -> 524208 [ 0.000000] On node 0 totalpages: 524107 [ 0.000000] DMA zone: 96 pages used for memmap [ 0.000000] DMA zone: 1193 pages reserved [ 0.000000] DMA zone: 2706 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12190 pages used for memmap [ 0.000000] DMA32 zone: 507922 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009b000 - 000000000009c000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009c000 - 00000000000ea000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000ea000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34376 bytes of per cpu data [ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar [ 0.000000] Built 1 zonelists. Total pages: 510628 [ 0.000000] Kernel command line: root=UUID=474d6f2a-e2ad-4685-9e43-c853b827c221 ro vga=795 quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] WARNING: experimental RCU implementation. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 17.703382] time.c: Detected 2399.995 MHz processor. [ 17.703408] Console: colour dummy device 80x25 [ 17.703421] Checking aperture... [ 17.703424] CPU 0: aperture @ 10000000 size 32 MB [ 17.703426] Aperture too small (32 MB) [ 17.709424] No AGP bridge found [ 17.728482] Memory: 2034912k/2096832k available (2343k kernel code, 61516k reserved, 1228k data, 324k init) [ 17.788211] Calibrating delay using timer specific routine.. 4801.51 BogoMIPS (lpj=2400755) [ 17.788249] Security Framework v1.0.0 initialized [ 17.788254] SELinux: Disabled at boot. [ 17.788410] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 17.789391] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 17.789868] Mount-cache hash table entries: 256 [ 17.789994] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 17.789996] CPU: L2 Cache: 512K (64 bytes/line) [ 17.789998] CPU 0/0 -> Node 0 [ 17.790000] CPU: Physical Processor ID: 0 [ 17.790001] CPU: Processor Core ID: 0 [ 17.790014] SMP alternatives: switching to UP code [ 17.790183] Early unpacking initramfs... done [ 18.041146] ACPI: Core revision 20070126 [ 18.041214] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 18.054736] Using local APIC timer interrupts. [ 18.096341] APIC timer calibration result 14999964 [ 18.096342] Detected 14.999 MHz APIC timer. [ 18.096733] SMP alternatives: switching to SMP code [ 18.096811] Booting processor 1/2 APIC 0x1 [ 18.106690] Initializing CPU#1 [ 18.167078] Calibrating delay using timer specific routine.. 4799.72 BogoMIPS (lpj=2399863) [ 18.167083] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 18.167085] CPU: L2 Cache: 512K (64 bytes/line) [ 18.167087] CPU 1/1 -> Node 0 [ 18.167089] CPU: Physical Processor ID: 0 [ 18.167090] CPU: Processor Core ID: 1 [ 18.167159] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 18.167408] Brought up 2 CPUs [ 18.167672] NET: Registered protocol family 16 [ 18.167757] ACPI: bus type pci registered [ 18.167762] PCI: Using configuration type 1 [ 18.170395] ACPI: EC: Look up EC in DSDT [ 18.178007] ACPI: Interpreter enabled [ 18.178010] ACPI: (supports S0 S1 S3 S4 S5) [ 18.178031] ACPI: Using IOAPIC for interrupt routing [ 18.189773] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 18.189780] PCI: Probing PCI hardware (bus 00) [ 18.190608] PCI: Transparent bridge - 0000:00:12.0 [ 18.190778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 18.191077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2P._PRT] [ 18.191233] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT] [ 18.191325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE1._PRT] [ 18.191416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 18.191507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT] [ 18.191598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] [ 18.203178] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10 [ 18.203368] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 18.203555] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 18.203741] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 18.203927] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 18.204120] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10 [ 18.204307] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 [ 18.204492] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *10 [ 18.204678] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled. [ 18.204863] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 18.205054] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11 [ 18.205250] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11 [ 18.205484] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 18.205573] Linux Plug and Play Support v0.97 (c) Adam Belay [ 18.205585] pnp: PnP ACPI init [ 18.205596] ACPI: bus type pnp registered [ 18.212858] pnp: PnP ACPI: found 14 devices [ 18.212860] ACPI: ACPI bus type pnp unregistered [ 18.212918] PCI: Using ACPI for IRQ routing [ 18.212921] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 18.212999] NET: Registered protocol family 8 [ 18.213001] NET: Registered protocol family 20 [ 18.213137] pnp: 00:08: iomem range 0xfee01000-0xfeefffff has been reserved [ 18.213141] pnp: 00:08: iomem range 0xfefff000-0xfeffffff has been reserved [ 18.213144] pnp: 00:08: iomem range 0xffb00000-0xfffeffff could not be reserved [ 18.213148] pnp: 00:08: iomem range 0xfff00000-0xffffffff could not be reserved [ 18.213154] pnp: 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 18.213157] pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved [ 18.213163] pnp: 00:0b: ioport range 0xc00-0xc0f has been reserved [ 18.213166] pnp: 00:0b: ioport range 0xd00-0xd0f has been reserved [ 18.213168] pnp: 00:0b: ioport range 0xa20-0xa2f has been reserved [ 18.213171] pnp: 00:0b: ioport range 0xa30-0xa3f has been reserved [ 18.213176] pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 18.213182] pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 18.213185] pnp: 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 18.213188] pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 18.213191] pnp: 00:0d: iomem range 0x100000-0x7fffffff could not be reserved [ 18.213480] PCI: Bridge: 0000:00:02.0 [ 18.213481] IO window: disabled. [ 18.213484] MEM window: disabled. [ 18.213485] PREFETCH window: disabled. [ 18.213487] PCI: Bridge: 0000:00:03.0 [ 18.213488] IO window: disabled. [ 18.213490] MEM window: disabled. [ 18.213492] PREFETCH window: disabled. [ 18.213494] PCI: Bridge: 0000:00:04.0 [ 18.213496] IO window: e000-efff [ 18.213499] MEM window: dc000000-dfefffff [ 18.213501] PREFETCH window: c0000000-cfffffff [ 18.213503] PCI: Bridge: 0000:00:12.0 [ 18.213505] IO window: disabled. [ 18.213508] MEM window: dff00000-dfffffff [ 18.213510] PREFETCH window: disabled. [ 18.213512] PCI: Bridge: 0000:00:16.0 [ 18.213513] IO window: disabled. [ 18.213516] MEM window: disabled. [ 18.213518] PREFETCH window: disabled. [ 18.213520] PCI: Bridge: 0000:00:17.0 [ 18.213521] IO window: disabled. [ 18.213523] MEM window: disabled. [ 18.213525] PREFETCH window: disabled. [ 18.213535] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 18.213540] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 18.213546] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 18.213550] PCI: Setting latency timer of device 0000:00:12.0 to 64 [ 18.213556] PCI: Setting latency timer of device 0000:00:16.0 to 64 [ 18.213563] PCI: Setting latency timer of device 0000:00:17.0 to 64 [ 18.213636] NET: Registered protocol family 2 [ 18.216338] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 18.217990] TCP established hash table entries: 262144 (order: 12, 18874368 bytes) [ 18.226440] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) [ 18.228214] TCP: Hash tables configured (established 262144 bind 65536) [ 18.228232] TCP reno registered [ 18.229348] checking if image is initramfs... it is [ 18.727064] Freeing initrd memory: 7303k freed [ 18.731033] audit: initializing netlink socket (disabled) [ 18.731042] audit(1193874147.988:1): initialized [ 18.731421] VFS: Disk quotas dquot_6.5.1 [ 18.731430] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 18.731481] io scheduler noop registered [ 18.731483] io scheduler anticipatory registered [ 18.731484] io scheduler deadline registered [ 18.731494] io scheduler cfq registered (default) [ 19.256084] PCI: Found disabled HT MSI Mapping on 0000:00:16.0 [ 19.256090] PCI: Found disabled HT MSI Mapping on 0000:00:00.0 [ 19.256092] PCI: MSI quirk detected. MSI disabled on chipset 0000:00:16.0. [ 19.256098] PCI: Found disabled HT MSI Mapping on 0000:00:17.0 [ 19.256102] PCI: Found disabled HT MSI Mapping on 0000:00:00.0 [ 19.256104] PCI: MSI quirk detected. MSI disabled on chipset 0000:00:17.0. [ 19.256110] Boot video device is 0000:03:00.0 [ 19.256253] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 19.256272] assign_interrupt_mode Found MSI capability [ 19.256275] Allocate Port Service[0000:00:02.0:pcie00] [ 19.256342] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 19.256361] assign_interrupt_mode Found MSI capability [ 19.256363] Allocate Port Service[0000:00:03.0:pcie00] [ 19.256415] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 19.256434] assign_interrupt_mode Found MSI capability [ 19.256436] Allocate Port Service[0000:00:04.0:pcie00] [ 19.256498] PCI: Setting latency timer of device 0000:00:16.0 to 64 [ 19.256520] assign_interrupt_mode Found MSI capability [ 19.256522] Allocate Port Service[0000:00:16.0:pcie00] [ 19.256581] PCI: Setting latency timer of device 0000:00:17.0 to 64 [ 19.256603] assign_interrupt_mode Found MSI capability [ 19.256605] Allocate Port Service[0000:00:17.0:pcie00] [ 19.256745] vesafb: framebuffer at 0xdd000000, mapped to 0xffffc20001a00000, using 10240k, total 14336k [ 19.256748] vesafb: mode is 1280x1024x32, linelength=5120, pages=1 [ 19.256749] vesafb: scrolling: redraw [ 19.256751] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 19.256825] fb0: VESA VGA frame buffer device [ 19.282088] Real Time Clock Driver v1.12ac [ 19.282198] Linux agpgart interface v0.102 (c) Dave Jones [ 19.282200] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 19.282300] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 19.282857] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 19.283610] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 19.283738] input: Macintosh mouse button emulation as /class/input/input0 [ 19.283884] PNP: No PS/2 controller found. Probing ports directly. [ 19.285836] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 19.285885] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 19.285854] mice: PS/2 mouse device common for all mice [ 19.285952] TCP cubic registered [ 19.285958] NET: Registered protocol family 1 [ 19.286160] /build/buildd/linux-source-2.6.22-2.6.22/debian/build/custom-source-rt/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 19.286168] Freeing unused kernel memory: 324k freed [ 19.360499] Console: switching to colour frame buffer device 160x64 [ 20.508285] AppArmor: AppArmor initialized<5>audit(1193874149.768:2): type=1505 info="AppArmor initialized" pid=1249 [ 20.513580] fuse init (API version 7.8) [ 20.517590] Failure registering capabilities with primary security module. [ 20.524303] ACPI: Processor [CPU1] (supports 8 throttling states) [ 20.913059] SCSI subsystem initialized [ 20.916793] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 20.916798] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 20.918784] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 20.919441] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 [ 20.919450] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LMAC] -> GSI 23 (level, low) -> IRQ 23 [ 20.919456] PCI: Setting latency timer of device 0000:00:13.0 to 64 [ 20.919463] forcedeth: using HIGHDMA [ 20.938843] libata version 2.21 loaded. [ 20.939859] usbcore: registered new interface driver usbfs [ 20.939881] usbcore: registered new interface driver hub [ 20.939912] usbcore: registered new device driver usb [ 20.940894] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 20.966965] Floppy drive(s): fd0 is 1.44M [ 20.982302] FDC 0 is a post-1991 82077 [ 21.436236] eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:13.0 [ 21.436908] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 [ 21.436919] ACPI: PCI Interrupt 0000:04:0b.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19 [ 21.437387] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22 [ 21.437396] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 22 [ 21.437512] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 21.437518] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 21.437655] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 21.437706] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xdbffe000 [ 21.487044] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dffff800-dfffffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 21.490155] usb usb1: configuration #1 chosen from 1 choice [ 21.490182] hub 1-0:1.0: USB hub found [ 21.490190] hub 1-0:1.0: 10 ports detected [ 21.591034] NFORCE-CK804: IDE controller at PCI slot 0000:00:0f.0 [ 21.591051] NFORCE-CK804: chipset revision 243 [ 21.591053] NFORCE-CK804: not 100% native mode: will probe irqs later [ 21.591058] NFORCE-CK804: 0000:00:0f.0 (rev f3) UDMA133 controller [ 21.591065] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio [ 21.591073] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio [ 21.591079] Probing IDE interface ide0... [ 21.851565] usb 1-3: new low speed USB device using ohci_hcd and address 2 [ 22.046263] usb 1-3: configuration #1 chosen from 1 choice [ 22.262128] hda: Pioneer DVD-ROM ATAPIModel DVD-117 0107, ATAPI CD/DVD-ROM drive [ 22.309971] usb 1-4: new low speed USB device using ohci_hcd and address 3 [ 22.501543] usb 1-4: configuration #1 chosen from 1 choice [ 22.567843] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 22.569139] Probing IDE interface ide1... [ 22.741506] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80001124584] [ 23.087280] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21 [ 23.087289] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 21 (level, low) -> IRQ 21 [ 23.087405] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 23.087411] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 23.087463] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [ 23.087490] ehci_hcd 0000:00:0b.1: debug port 1 [ 23.087493] PCI: cache line size of 64 is not supported by device 0000:00:0b.1 [ 23.087534] ehci_hcd 0000:00:0b.1: irq 21, io mem 0xdbfffc00 [ 23.087541] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 23.087579] usb 1-3: USB disconnect, address 2 [ 23.087795] usb usb2: configuration #1 chosen from 1 choice [ 23.087817] hub 2-0:1.0: USB hub found [ 23.087823] hub 2-0:1.0: 10 ports detected [ 23.190853] usb 1-4: USB disconnect, address 3 [ 23.190936] sata_nv 0000:00:10.0: version 3.4 [ 23.191493] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20 [ 23.191502] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 20 [ 23.191506] sata_nv 0000:00:10.0: Using ADMA mode [ 23.191662] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 23.191814] scsi0 : sata_nv [ 23.191897] scsi1 : sata_nv [ 23.191959] ata1: SATA max UDMA/133 cmd 0xffffc200019be480 ctl 0xffffc200019be4a0 bmdma 0x000000000001c400 irq 20 [ 23.191964] ata2: SATA max UDMA/133 cmd 0xffffc200019be580 ctl 0xffffc200019be5a0 bmdma 0x000000000001c408 irq 20 [ 23.208555] hda: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(66) [ 23.208563] Uniform CD-ROM driver Revision: 3.20 [ 23.604179] usbcore: registered new interface driver hiddev [ 23.645260] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 23.649151] ata1.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 [ 23.649154] ata1.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 23.656139] ata1.00: configured for UDMA/133 [ 23.864971] usb 1-3: new low speed USB device using ohci_hcd and address 4 [ 24.058110] usb 1-3: configuration #1 chosen from 1 choice [ 24.108663] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 24.262579] ata2.00: ATAPI: PLEXTOR DVDR PX-712A, 1.09, max UDMA/33 [ 24.262581] ata2.00: applying bridge limits [ 24.321380] usb 1-4: new low speed USB device using ohci_hcd and address 5 [ 24.419379] ata2.00: configured for UDMA/33 [ 24.419469] scsi 0:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 [ 24.419475] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 24.420125] scsi 1:0:0:0: CD-ROM PLEXTOR DVDR PX-712A 1.09 PQ: 0 ANSI: 5 [ 24.420131] ata2: bounce limit 0xFFFFFFFF, segment boundary 0xFFFF, hw segs 127 [ 24.420489] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23 [ 24.420492] ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LSA1] -> GSI 23 (level, low) -> IRQ 23 [ 24.420496] sata_nv 0000:00:11.0: Using ADMA mode [ 24.420636] PCI: Setting latency timer of device 0000:00:11.0 to 64 [ 24.420766] scsi2 : sata_nv [ 24.420839] scsi3 : sata_nv [ 24.420910] ata3: SATA max UDMA/133 cmd 0xffffc200019c0480 ctl 0xffffc200019c04a0 bmdma 0x000000000001b800 irq 23 [ 24.420916] ata4: SATA max UDMA/133 cmd 0xffffc200019c0580 ctl 0xffffc200019c05a0 bmdma 0x000000000001b808 irq 23 [ 24.511393] usb 1-4: configuration #1 chosen from 1 choice [ 24.521470] input: CHESEN USB Keyboard as /class/input/input1 [ 24.521479] input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:0b.0-3 [ 24.535318] input: CHESEN USB Keyboard as /class/input/input2 [ 24.535323] input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:0b.0-3 [ 24.541390] input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 [ 24.541408] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-4 [ 24.541418] usbcore: registered new interface driver usbhid [ 24.541421] /build/buildd/linux-source-2.6.22-2.6.22/debian/build/custom-source-rt/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 24.873677] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 24.906363] ata3.00: ATA-7: ST3500641AS, 3.AAE, max UDMA/133 [ 24.906366] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 24.981215] ata3.00: configured for UDMA/133 [ 25.433955] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 25.466743] ata4.00: ATA-7: ST3500641AS, 3.AAE, max UDMA/133 [ 25.466746] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 25.541596] ata4.00: configured for UDMA/133 [ 25.541682] scsi 2:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 ANSI: 5 [ 25.541689] ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 25.541770] scsi 3:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 ANSI: 5 [ 25.541774] ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 25.546953] sd 0:0:0:0: [sda] 293046768 512-byte hardware sectors (150040 MB) [ 25.546965] sd 0:0:0:0: [sda] Write Protect is off [ 25.546967] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.546982] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.547028] sd 0:0:0:0: [sda] 293046768 512-byte hardware sectors (150040 MB) [ 25.547036] sd 0:0:0:0: [sda] Write Protect is off [ 25.547038] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.547052] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.547055] sda: sda1 sda2 sda3 sda4 [ 25.555603] sd 0:0:0:0: [sda] Attached SCSI disk [ 25.555678] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 25.555688] sd 2:0:0:0: [sdb] Write Protect is off [ 25.555691] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 25.555705] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.555748] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 25.555757] sd 2:0:0:0: [sdb] Write Protect is off [ 25.555759] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 25.555773] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.555634] sdb:sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 25.558273] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 25.570022] sdb1 sdb2 sdb3 [ 25.570090] sd 2:0:0:0: [sdb] Attached SCSI disk [ 25.570138] sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) [ 25.570148] sd 3:0:0:0: [sdc] Write Protect is off [ 25.570150] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 25.570165] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.570200] sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) [ 25.570209] sd 3:0:0:0: [sdc] Write Protect is off [ 25.570211] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 25.570225] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.570228] sdc: sdc1 sdc2 sdc3 [ 25.613455] sd 3:0:0:0: [sdc] Attached SCSI disk [ 25.618533] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 25.618553] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 25.618573] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 25.618606] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 25.819130] EXT3-fs: INFO: recovery required on readonly filesystem. [ 25.819134] EXT3-fs: write access will be enabled during recovery. [ 30.207311] kjournald starting. Commit interval 5 seconds [ 30.207326] EXT3-fs: sda3: orphan cleanup on readonly fs [ 30.207333] ext3_orphan_cleanup: deleting unreferenced inode 572460 [ 30.207361] ext3_orphan_cleanup: deleting unreferenced inode 1864389 [ 30.207371] ext3_orphan_cleanup: deleting unreferenced inode 1864164 [ 30.207392] EXT3-fs: sda3: 3 orphan inodes deleted [ 30.207393] EXT3-fs: recovery complete. [ 30.222495] EXT3-fs: mounted filesystem with ordered data mode. [ 35.618214] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 35.627463] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 35.663474] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600 [ 35.663493] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700 [ 35.865566] input: PC Speaker as /class/input/input4 [ 36.029242] parport_pc 00:06: reported by Plug and Play ACPI [ 36.029296] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 36.104668] usbcore: registered new interface driver xpad [ 36.104672] /build/buildd/linux-source-2.6.22-2.6.22/debian/build/custom-source-rt/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6 [ 36.325544] nvidia: module license 'NVIDIA' taints kernel. [ 36.519236] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22 [ 36.519240] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LACI] -> GSI 22 (level, low) -> IRQ 22 [ 36.519367] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 36.831191] intel8x0_measure_ac97_clock: measured 50747 usecs [ 36.831194] intel8x0: clocking to 46843 [ 36.831716] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19 [ 36.831725] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 36.831844] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007 [ 37.405577] lp0: using parport0 (interrupt-driven). [ 37.474938] Adding 5116692k swap on /dev/sdc3. Priority:-1 extents:1 across:5116692k [ 37.792447] EXT3 FS on sda3, internal journal [ 88.933094] kjournald starting. Commit interval 5 seconds [ 88.933878] EXT3 FS on sda4, internal journal [ 88.933884] EXT3-fs: mounted filesystem with ordered data mode. [ 90.459541] NET: Registered protocol family 15 [ 91.113811] Initializing XFRM netlink socket [ 91.376964] input: Power Button (FF) as /class/input/input5 [ 91.376982] ACPI: Power Button (FF) [PWRF] [ 91.377060] input: Power Button (CM) as /class/input/input6 [ 91.377078] ACPI: Power Button (CM) [PWRB] [ 91.478861] No dock devices found. [ 91.598111] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00) [ 91.598677] powernow-k8: MP systems not supported by PSB BIOS structure [ 91.598154] powernow-k8: MP systems not supported by PSB BIOS structure [ 92.476366] ppdev: user-space parallel port driver [ 92.659075] audit(1193870622.390:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5553 profile="/usr/sbin/cupsd" [ 93.753422] NET: Registered protocol family 10 [ 93.753501] lo: Disabled Privacy Extensions [ 93.809139] Failure registering capabilities with primary security module. [ 94.403516] Bluetooth: Core ver 2.11 [ 94.403574] NET: Registered protocol family 31 [ 94.403576] Bluetooth: HCI device and connection manager initialized [ 94.403580] Bluetooth: HCI socket layer initialized [ 94.428020] Bluetooth: L2CAP ver 2.8 [ 94.428025] Bluetooth: L2CAP socket layer initialized [ 94.500852] Bluetooth: RFCOMM socket layer initialized [ 94.500868] Bluetooth: RFCOMM TTY layer initialized [ 94.500869] Bluetooth: RFCOMM ver 1.8 [ 98.457224] NET: Registered protocol family 17 [ 111.263544] eth0: no IPv6 routers present