[ 0.000000] Linux version 2.6.22-10-generic (buildd@palmer) (gcc version 4.1.3 20070812 (prerelease) (Ubuntu 4.1.2-15ubuntu2)) #1 SMP Wed Aug 22 08:11:52 GMT 2007 (Ubuntu 2.6.22-10.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f692400 (usable) [ 0.000000] BIOS-e820: 000000003f692400 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 118MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 259730) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 259730 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 259730 [ 0.000000] On node 0 totalpages: 259730 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 237 pages used for memmap [ 0.000000] HighMem zone: 30117 pages, LIFO batch:7 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FBBF0, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT 3F693E00, 005C (r1 DELL M08 27D70517 ASL 61) [ 0.000000] ACPI: FACP 3F693C9C, 00F4 (r4 DELL M08 27D70517 ASL 61) [ 0.000000] ACPI: DSDT 3F694400, 5629 (r2 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 3F6A2C00, 0040 [ 0.000000] ACPI: HPET 3F693F00, 0038 (r1 DELL M08 1 ASL 61) [ 0.000000] ACPI: APIC 3F694000, 0068 (r1 DELL M08 27D70517 ASL 47) [ 0.000000] ACPI: MCFG 3F693FC0, 003E (r16 DELL M08 27D70517 ASL 61) [ 0.000000] ACPI: SLIC 3F69409C, 0024 (r1 DELL M08 27D70517 ASL 61) [ 0.000000] ACPI: BOOT 3F693BC0, 0028 (r1 DELL M08 27D70517 ASL 61) [ 0.000000] ACPI: SSDT 3F6926EB, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b8000000) [ 0.000000] Built 1 zonelists. Total pages: 257701 [ 0.000000] Kernel command line: root=UUID=7a5329ce-7bec-4ce2-9af1-de4fea30a690 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1995.163 MHz processor. [ 7.495200] Console: colour VGA+ 80x25 [ 7.495667] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 7.496223] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 7.536007] Memory: 1018312k/1038920k available (2010k kernel code, 19904k reserved, 917k data, 364k init, 121416k highmem) [ 7.536025] virtual kernel memory layout: [ 7.536026] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 7.536028] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 7.536031] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 7.536033] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 7.536034] .init : 0xc03e1000 - 0xc043c000 ( 364 kB) [ 7.536035] .data : 0xc02f69c6 - 0xc03dbe64 ( 917 kB) [ 7.536039] .text : 0xc0100000 - 0xc02f69c6 (2010 kB) [ 7.536045] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 7.536101] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 7.536238] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 7.536249] hpet0: 3 64-bit timers, 14318180 Hz [ 7.617236] Calibrating delay using timer specific routine.. 3997.22 BogoMIPS (lpj=7994457) [ 7.617270] Security Framework v1.0.0 initialized [ 7.617277] SELinux: Disabled at boot. [ 7.617299] Mount-cache hash table entries: 512 [ 7.617488] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 7.617502] monitor/mwait feature present. [ 7.617507] using mwait in idle threads. [ 7.617514] CPU: L1 I cache: 32K, L1 D cache: 32K [ 7.617519] CPU: L2 cache: 4096K [ 7.617523] CPU: Physical Processor ID: 0 [ 7.617527] CPU: Processor Core ID: 0 [ 7.617529] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 7.617547] Compat vDSO mapped to ffffe000. [ 7.617566] Checking 'hlt' instruction... OK. [ 7.633404] SMP alternatives: switching to UP code [ 7.634132] Early unpacking initramfs... done [ 8.282872] ACPI: Core revision 20070126 [ 8.282951] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 8.289319] CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a [ 8.289347] SMP alternatives: switching to SMP code [ 8.289446] Booting processor 1/1 eip 3000 [ 8.300086] Initializing CPU#1 [ 8.376804] Calibrating delay using timer specific routine.. 3990.44 BogoMIPS (lpj=7980889) [ 8.376815] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 8.376825] monitor/mwait feature present. [ 8.376831] CPU: L1 I cache: 32K, L1 D cache: 32K [ 8.376834] CPU: L2 cache: 4096K [ 8.376838] CPU: Physical Processor ID: 0 [ 8.376840] CPU: Processor Core ID: 1 [ 8.376842] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 8.378018] CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a [ 8.378059] Total of 2 processors activated (7987.67 BogoMIPS). [ 8.378336] ENABLING IO-APIC IRQs [ 8.378594] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 8.524868] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 8.544887] Brought up 2 CPUs [ 8.857620] migration_cost=27 [ 8.857834] Booting paravirtualized kernel on bare hardware [ 8.857966] Time: 22:16:47 Date: 07/23/107 [ 8.857999] NET: Registered protocol family 16 [ 8.858142] EISA bus registered [ 8.858150] ACPI: bus type pci registered [ 8.873358] PCI: PCI BIOS revision 2.10 entry at 0xfad46, last bus=14 [ 8.873363] PCI: Using configuration type 1 [ 8.873365] Setting up standard PCI resources [ 8.888171] ACPI: EC: Look up EC in DSDT [ 8.984336] ACPI: Interpreter enabled [ 8.984346] ACPI: (supports S0 S3 S4 S5) [ 8.984375] ACPI: Using IOAPIC for interrupt routing [ 9.019169] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 9.019190] PCI: Probing PCI hardware (bus 00) [ 9.022096] PCI: Transparent bridge - 0000:00:1e.0 [ 9.022207] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 9.022853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 9.023079] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 9.023251] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 9.023419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 9.023586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 9.040938] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 9.041103] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 9.041263] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 [ 9.041428] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) [ 9.041588] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 9.041750] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 9.041913] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 9.042060] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 9.042243] Linux Plug and Play Support v0.97 (c) Adam Belay [ 9.042256] pnp: PnP ACPI init [ 9.042269] ACPI: bus type pnp registered [ 9.096870] pnp: PnP ACPI: found 12 devices [ 9.096873] ACPI: ACPI bus type pnp unregistered [ 9.096878] PnPBIOS: Disabled by ACPI PNP [ 9.096935] PCI: Using ACPI for IRQ routing [ 9.096939] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 9.172166] NET: Registered protocol family 8 [ 9.172169] NET: Registered protocol family 20 [ 9.172237] pnp: 00:05: ioport range 0xc80-0xcff could not be reserved [ 9.172247] pnp: 00:08: iomem range 0xfed00000-0xfed003ff has been reserved [ 9.172254] pnp: 00:09: ioport range 0x900-0x97f has been reserved [ 9.172258] pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 9.172262] pnp: 00:09: ioport range 0x1000-0x1005 has been reserved [ 9.172266] pnp: 00:09: ioport range 0x1008-0x100f has been reserved [ 9.172273] pnp: 00:0a: ioport range 0xf400-0xf4fe has been reserved [ 9.172276] pnp: 00:0a: ioport range 0x1006-0x1007 has been reserved [ 9.172280] pnp: 00:0a: ioport range 0x100a-0x1059 could not be reserved [ 9.172284] pnp: 00:0a: ioport range 0x1060-0x107f has been reserved [ 9.172288] pnp: 00:0a: ioport range 0x1080-0x10bf has been reserved [ 9.172292] pnp: 00:0a: ioport range 0x10c0-0x10df has been reserved [ 9.172295] pnp: 00:0a: ioport range 0x1010-0x102f has been reserved [ 9.172303] pnp: 00:0b: iomem range 0x0-0x9efff could not be reserved [ 9.172307] pnp: 00:0b: iomem range 0x9f000-0x9ffff could not be reserved [ 9.172311] pnp: 00:0b: iomem range 0xc0000-0xcffff could not be reserved [ 9.172314] pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 9.172360] Time: tsc clocksource has been installed. [ 9.172370] Switched to high resolution mode on CPU 0 [ 9.172520] Switched to high resolution mode on CPU 1 [ 9.202712] PCI: Bridge: 0000:00:1c.0 [ 9.202714] IO window: disabled. [ 9.202722] MEM window: disabled. [ 9.202727] PREFETCH window: disabled. [ 9.202735] PCI: Bridge: 0000:00:1c.1 [ 9.202736] IO window: disabled. [ 9.202744] MEM window: fe800000-fe8fffff [ 9.202750] PREFETCH window: disabled. [ 9.202757] PCI: Bridge: 0000:00:1c.3 [ 9.202761] IO window: d000-dfff [ 9.202769] MEM window: fe600000-fe7fffff [ 9.202775] PREFETCH window: f0000000-f01fffff [ 9.202782] PCI: Bridge: 0000:00:1c.5 [ 9.202784] IO window: disabled. [ 9.202792] MEM window: fe500000-fe5fffff [ 9.202797] PREFETCH window: disabled. [ 9.202805] PCI: Bridge: 0000:00:1e.0 [ 9.202807] IO window: disabled. [ 9.202815] MEM window: fe400000-fe4fffff [ 9.202820] PREFETCH window: disabled. [ 9.202856] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 9.202864] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 9.202895] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 9.202902] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 9.202932] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 [ 9.202940] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 9.202968] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 9.202976] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 9.202993] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 9.203006] NET: Registered protocol family 2 [ 9.252264] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 9.252322] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 9.253112] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 9.253388] TCP: Hash tables configured (established 131072 bind 65536) [ 9.253391] TCP reno registered [ 9.268395] checking if image is initramfs... it is [ 10.166296] Freeing initrd memory: 7066k freed [ 10.166415] Simple Boot Flag at 0x79 set to 0x1 [ 10.167008] audit: initializing netlink socket (disabled) [ 10.167026] audit(1187907408.012:1): initialized [ 10.167144] highmem bounce pool size: 64 pages [ 10.169626] VFS: Disk quotas dquot_6.5.1 [ 10.169685] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 10.169793] io scheduler noop registered [ 10.169796] io scheduler anticipatory registered [ 10.169798] io scheduler deadline registered [ 10.169816] io scheduler cfq registered (default) [ 10.169828] Boot video device is 0000:00:02.0 [ 10.170085] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 10.170156] assign_interrupt_mode Found MSI capability [ 10.170217] Allocate Port Service[0000:00:1c.0:pcie00] [ 10.170263] Allocate Port Service[0000:00:1c.0:pcie02] [ 10.170386] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 10.170457] assign_interrupt_mode Found MSI capability [ 10.170514] Allocate Port Service[0000:00:1c.1:pcie00] [ 10.170552] Allocate Port Service[0000:00:1c.1:pcie02] [ 10.170678] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 10.170749] assign_interrupt_mode Found MSI capability [ 10.170805] Allocate Port Service[0000:00:1c.3:pcie00] [ 10.170843] Allocate Port Service[0000:00:1c.3:pcie02] [ 10.170967] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 10.171038] assign_interrupt_mode Found MSI capability [ 10.171095] Allocate Port Service[0000:00:1c.5:pcie00] [ 10.171135] Allocate Port Service[0000:00:1c.5:pcie02] [ 10.171383] isapnp: Scanning for PnP cards... [ 10.525396] isapnp: No Plug & Play device found [ 10.551929] Real Time Clock Driver v1.12ac [ 10.552095] hpet_resources: 0xfed00000 is busy [ 10.552176] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 10.553414] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 10.553561] input: Macintosh mouse button emulation as /class/input/input0 [ 10.553666] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 10.556788] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 10.556793] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 10.556944] mice: PS/2 mouse device common for all mice [ 10.557075] EISA: Probing bus 0 at eisa.0 [ 10.557085] Cannot allocate resource for EISA slot 1 [ 10.557123] EISA: Detected 0 cards. [ 10.557217] TCP cubic registered [ 10.557231] NET: Registered protocol family 1 [ 10.557255] Using IPI No-Shortcut mode [ 10.557467] Magic number: 3:794:300 [ 10.557747] Freeing unused kernel memory: 364k freed [ 10.560497] input: AT Translated Set 2 keyboard as /class/input/input1 [ 11.831958] AppArmor: AppArmor initialized [ 11.831966] audit(1187907410.012:2): AppArmor initialized [ 11.831967] [ 11.838224] AppArmor: Registered secondary security module: capability. [ 11.838228] Capability LSM initialized as secondary [ 11.851254] ACPI: SSDT 3F6930F2, 0286 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 11.851539] ACPI: SSDT 3F692BB7, 04B6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 11.851924] Monitor-Mwait will be used to enter C-1 state [ 11.851929] Monitor-Mwait will be used to enter C-2 state [ 11.851932] Monitor-Mwait will be used to enter C-3 state [ 11.851938] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 11.851945] ACPI: Processor [CPU0] (supports 8 throttling states) [ 11.852252] ACPI: SSDT 3F693378, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 11.852521] ACPI: SSDT 3F69306D, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 11.852959] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 11.852966] ACPI: Processor [CPU1] (supports 8 throttling states) [ 4.196000] Marking TSC unstable due to: possible TSC halt in C2. [ 4.200000] Time: hpet clocksource has been installed. [ 4.200000] ACPI: Thermal Zone [THM] (32 C) [ 4.804000] usbcore: registered new interface driver usbfs [ 4.804000] usbcore: registered new interface driver hub [ 4.804000] usbcore: registered new device driver usb [ 4.804000] USB Universal Host Controller Interface driver v3.0 [ 4.804000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 4.804000] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 4.804000] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 4.804000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 4.804000] uhci_hcd 0000:00:1a.0: irq 19, io base 0x00006f20 [ 4.804000] usb usb1: configuration #1 chosen from 1 choice [ 4.804000] hub 1-0:1.0: USB hub found [ 4.804000] hub 1-0:1.0: 2 ports detected [ 4.872000] SCSI subsystem initialized [ 4.876000] libata version 2.21 loaded. [ 4.908000] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 4.908000] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 4.908000] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 4.908000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 4.908000] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00006f00 [ 4.908000] usb usb2: configuration #1 chosen from 1 choice [ 4.908000] hub 2-0:1.0: USB hub found [ 4.908000] hub 2-0:1.0: 2 ports detected [ 5.012000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 5.012000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 5.012000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.012000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 5.012000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00006f80 [ 5.012000] usb usb3: configuration #1 chosen from 1 choice [ 5.012000] hub 3-0:1.0: USB hub found [ 5.012000] hub 3-0:1.0: 2 ports detected [ 5.116000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 5.116000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 5.116000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.116000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 5.116000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006f60 [ 5.116000] usb usb4: configuration #1 chosen from 1 choice [ 5.116000] hub 4-0:1.0: USB hub found [ 5.116000] hub 4-0:1.0: 2 ports detected [ 5.148000] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 5.220000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 5.220000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 5.220000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.220000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 5.220000] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006f40 [ 5.220000] usb usb5: configuration #1 chosen from 1 choice [ 5.220000] hub 5-0:1.0: USB hub found [ 5.220000] hub 5-0:1.0: 2 ports detected [ 5.316000] usb 1-2: configuration #1 chosen from 1 choice [ 5.320000] hub 1-2:1.0: USB hub found [ 5.320000] hub 1-2:1.0: 3 ports detected [ 5.324000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 21 [ 5.324000] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 5.324000] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 5.324000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 5.324000] ehci_hcd 0000:00:1a.7: debug port 1 [ 5.324000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 5.324000] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xfed1c400 [ 5.328000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.328000] usb usb6: configuration #1 chosen from 1 choice [ 5.328000] hub 6-0:1.0: USB hub found [ 5.328000] hub 6-0:1.0: 4 ports detected [ 5.432000] usb 1-2: USB disconnect, address 2 [ 5.432000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 [ 5.432000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 5.432000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.432000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 5.432000] ehci_hcd 0000:00:1d.7: debug port 1 [ 5.432000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 5.432000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfed1c000 [ 5.436000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.436000] usb usb7: configuration #1 chosen from 1 choice [ 5.436000] hub 7-0:1.0: USB hub found [ 5.436000] hub 7-0:1.0: 6 ports detected [ 5.500000] Clocksource tsc unstable (delta = -359651354 ns) [ 5.540000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 5.592000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fe4ff800-fe4fffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 5.596000] ata_piix 0000:00:1f.1: version 2.11 [ 5.596000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 5.596000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 5.596000] scsi0 : ata_piix [ 5.596000] scsi1 : ata_piix [ 5.596000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00016fa0 irq 14 [ 5.596000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00016fa8 irq 15 [ 5.944000] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632D, DE04, max UDMA/33 [ 6.132000] ata1.00: configured for UDMA/33 [ 6.132000] ata2: port disabled. ignoring. [ 6.148000] scsi 0:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632D DE04 PQ: 0 ANSI: 5 [ 6.148000] ahci 0000:00:1f.2: version 2.2 [ 6.148000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 6.148000] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x5) don't match [ 6.252000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 6.252000] Uniform CD-ROM driver Revision: 3.20 [ 6.252000] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 6.256000] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 6.288000] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 6.464000] usb 1-2: configuration #1 chosen from 1 choice [ 6.464000] hub 1-2:1.0: USB hub found [ 6.468000] hub 1-2:1.0: 3 ports detected [ 6.792000] usb 1-2.1: new full speed USB device using uhci_hcd and address 4 [ 6.868000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[344fc000314d2581] [ 6.916000] usb 1-2.1: configuration #1 chosen from 1 choice [ 7.128000] usb 1-2.2: new full speed USB device using uhci_hcd and address 5 [ 7.152000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode [ 7.152000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 7.152000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 7.152000] scsi2 : ahci [ 7.152000] scsi3 : ahci [ 7.152000] scsi4 : ahci [ 7.152000] ata3: SATA max UDMA/133 cmd 0xf8862900 ctl 0x00000000 bmdma 0x00000000 irq 219 [ 7.152000] ata4: DUMMY [ 7.152000] ata5: SATA max UDMA/133 cmd 0xf8862a00 ctl 0x00000000 bmdma 0x00000000 irq 219 [ 7.260000] usb 1-2.2: configuration #1 chosen from 1 choice [ 7.472000] usb 1-2.3: new full speed USB device using uhci_hcd and address 6 [ 7.604000] usb 1-2.3: configuration #1 chosen from 1 choice [ 7.608000] usbcore: registered new interface driver hiddev [ 7.608000] input: Broadcom Corp as /class/input/input2 [ 7.608000] input: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2 [ 7.612000] input: Broadcom Corp as /class/input/input3 [ 7.612000] input: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3 [ 7.612000] usbcore: registered new interface driver usbhid [ 7.612000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 7.636000] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.988000] ata3.00: ATA-7: TOSHIBA MK8037GSX, DL240D, max UDMA/100 [ 7.988000] ata3.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 31/32) [ 7.992000] ata3.00: configured for UDMA/100 [ 8.304000] ata5: SATA link down (SStatus 0 SControl 300) [ 8.304000] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK8037GS DL24 PQ: 0 ANSI: 5 [ 8.304000] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 8.304000] tg3.c:v3.77 (May 31, 2007) [ 8.304000] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 8.304000] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 8.312000] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 8.312000] sd 2:0:0:0: [sda] Write Protect is off [ 8.312000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.312000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.312000] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 8.312000] sd 2:0:0:0: [sda] Write Protect is off [ 8.312000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.312000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.312000] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 8.420000] sd 2:0:0:0: [sda] Attached SCSI disk [ 8.648000] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1a:a0:fc:df:d4 [ 8.648000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0] [ 8.648000] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 8.948000] Attempting manual resume [ 8.948000] swsusp: Resume From Partition 8:5 [ 8.948000] PM: Checking swsusp image. [ 8.948000] PM: Resume from disk failed. [ 9.072000] kjournald starting. Commit interval 5 seconds [ 9.072000] EXT3-fs: mounted filesystem with ordered data mode. [ 22.388000] ata3.00: exception Emask 0x2 SAct 0x8 SErr 0x0 action 0x2 frozen [ 22.388000] ata3.00: (spurious completions during NCQ issue=0x0 SAct=0x8 FIS=004040a1:00000020) [ 22.388000] ata3.00: cmd 60/0c:18:be:ae:2c/00:00:09:00:00/40 tag 3 cdb 0x0 data 6144 in [ 22.388000] res 40/00:34:ac:ba:2c/00:00:09:00:00/40 Emask 0x2 (HSM violation) [ 22.700000] ata3: soft resetting port [ 22.872000] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 22.876000] ata3.00: configured for UDMA/100 [ 22.876000] ata3: EH complete [ 22.876000] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 22.876000] sd 2:0:0:0: [sda] Write Protect is off [ 22.876000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 22.876000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.704000] PM: Writing back config space on device 0000:09:00.0 at offset c (was ffff0000, writing 0) [ 23.704000] PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100506, writing 100106) [ 24.924000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 24.928000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 25.140000] Linux agpgart interface v0.102 (c) Dave Jones [ 25.300000] agpgart: Detected an Intel 965GM Chipset. [ 25.304000] agpgart: Detected 7676K stolen memory. [ 25.316000] agpgart: AGP aperture is 256M @ 0xe0000000 [ 25.328000] input: PC Speaker as /class/input/input4 [ 25.368000] NET: Registered protocol family 17 [ 25.560000] ieee80211_crypt: registered algorithm 'NULL' [ 25.636000] input: PS/2 Mouse as /class/input/input5 [ 25.648000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 25.648000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 25.652000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input6 [ 25.776000] sdhci: Secure Digital Host Controller Interface driver [ 25.776000] sdhci: Copyright(c) Pierre Ossman [ 25.780000] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 22) [ 25.780000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 22 [ 25.780000] mmc0: SDHCI at 0xfe4ff400 irq 22 DMA [ 26.064000] Bluetooth: Core ver 2.11 [ 26.064000] NET: Registered protocol family 31 [ 26.064000] Bluetooth: HCI device and connection manager initialized [ 26.064000] Bluetooth: HCI socket layer initialized [ 26.116000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp [ 26.116000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 26.116000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 26.116000] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 26.116000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 26.172000] Bluetooth: HCI USB driver ver 2.9 [ 26.236000] usbcore: registered new interface driver hci_usb [ 26.352000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 26.352000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 26.916000] lp: driver loaded but no devices found [ 26.972000] fuse init (API version 7.8) [ 27.032000] Adding 1293192k swap on /dev/sda5. Priority:-1 extents:1 across:1293192k [ 27.924000] EXT3 FS on sda6, internal journal [ 28.000000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) [ 28.172000] kjournald starting. Commit interval 5 seconds [ 28.172000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 28.172000] EXT3 FS on sda3, internal journal [ 28.172000] EXT3-fs: mounted filesystem with ordered data mode. [ 28.356000] AppArmor: Unregistered secondary security module: capability