[ 0.000000] Linux version 2.6.22-14-generic (buildd@king) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 02:46:46 UTC 2008 (Ubuntu 2.6.22-14.52-generic) [ 0.000000] Command line: root=UUID=f7636295-ec7c-44fd-87a2-b4d1b00181b4 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfec0000 (usable) [ 0.000000] BIOS-e820: 00000000bfec0000 - 00000000bfedf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfedf000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786112) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1310720 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7E20 checksum 0 [ 0.000000] ACPI: RSDP 000F7E20, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT BFECFE6B, 0074 (r1 HPQOEM SLIC-MPC 6040000 LTP 0) [ 0.000000] ACPI: FACP BFEDBC3A, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1) [ 0.000000] ACPI: DSDT BFED0D49, AE7D (r2 INTEL CRESTLNE 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS BFEDEFC0, 0040 [ 0.000000] ACPI: HPET BFEDBD2E, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG BFEDBD66, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: TCPA BFEDBDA2, 0032 (r1 Intel CRESTLN 6040000 5A52) [ 0.000000] ACPI: TMOR BFEDBDD4, 0026 (r1 PTLTD 6040000 PTL 3) [ 0.000000] ACPI: SLIC BFEDBDFA, 0176 (r1 HPQOEM SLIC-MPC 6040000 HPQ 1) [ 0.000000] ACPI: APIC BFEDBF70, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT BFEDBFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SSDT BFED0A6C, 02DD (r1 SataRe SataAhci 1000 INTL 20061109) [ 0.000000] ACPI: SSDT BFECFEDF, 04E6 (r1 PmRef CpuPm 3000 INTL 20061109) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786112) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1310720 [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 786112 [ 0.000000] 0: 1048576 -> 1310720 [ 0.000000] On node 0 totalpages: 1048159 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1129 pages reserved [ 0.000000] DMA zone: 2814 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767736 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000bfec0000 - 00000000bfedf000 [ 0.000000] swsusp: Registered nosave memory region: 00000000bfedf000 - 00000000c0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000c0000000 - 00000000e0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec10000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec10000 - 00000000fed00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fed14000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed14000 - 00000000fed1a000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed1c000 - 00000000fed90000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed90000 - 00000000fee00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ff000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 1029110 [ 0.000000] Kernel command line: root=UUID=f7636295-ec7c-44fd-87a2-b4d1b00181b4 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 26.683978] time.c: Detected 2493.751 MHz processor. [ 26.685749] Console: colour VGA+ 80x25 [ 26.685765] Checking aperture... [ 26.685776] Calgary: detecting Calgary via BIOS EBDA area [ 26.685777] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 26.685779] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 26.721848] Placing software IO TLB between 0x103d000 - 0x503d000 [ 26.757818] Memory: 4043036k/5242880k available (2274k kernel code, 149600k reserved, 1185k data, 296k init) [ 26.757853] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 26.835646] Calibrating delay using timer specific routine.. 4992.48 BogoMIPS (lpj=9984970) [ 26.835672] Security Framework v1.0.0 initialized [ 26.835679] SELinux: Disabled at boot. [ 26.835924] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 26.838309] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 26.839432] Mount-cache hash table entries: 256 [ 26.839550] CPU: L1 I cache: 32K, L1 D cache: 32K [ 26.839553] CPU: L2 cache: 6144K [ 26.839555] CPU 0/0 -> Node 0 [ 26.839556] using mwait in idle threads. [ 26.839557] CPU: Physical Processor ID: 0 [ 26.839558] CPU: Processor Core ID: 0 [ 26.839563] CPU0: Thermal monitoring handled by SMI [ 26.839571] SMP alternatives: switching to UP code [ 26.839805] Early unpacking initramfs... done [ 27.086721] ACPI: Core revision 20070126 [ 27.086767] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 27.244039] Using local APIC timer interrupts. [ 27.284080] result 12468755 [ 27.284081] Detected 12.468 MHz APIC timer. [ 27.286995] SMP alternatives: switching to SMP code [ 27.287068] Booting processor 1/2 APIC 0x1 [ 27.297755] Initializing CPU#1 [ 27.374818] Calibrating delay using timer specific routine.. 4987.62 BogoMIPS (lpj=9975241) [ 27.374823] CPU: L1 I cache: 32K, L1 D cache: 32K [ 27.374825] CPU: L2 cache: 6144K [ 27.374826] CPU 1/1 -> Node 0 [ 27.374828] CPU: Physical Processor ID: 0 [ 27.374828] CPU: Processor Core ID: 1 [ 27.374833] CPU1: Thermal monitoring enabled (TM2) [ 27.375564] Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06 [ 27.378824] Brought up 2 CPUs [ 27.639413] migration_cost=11 [ 27.639563] NET: Registered protocol family 16 [ 27.639628] ACPI: bus type pci registered [ 27.639634] PCI: Using configuration type 1 [ 27.642588] ACPI: EC: Look up EC in DSDT [ 27.643542] ACPI: EC: GPE=0x17, ports=0x66, 0x62 [ 27.648051] ACPI: System BIOS is requesting _OSI(Linux) [ 27.648053] ACPI: Please test with "acpi_osi=!Linux" [ 27.648053] Please send dmidecode to linux-acpi@vger.kernel.org [ 27.650553] ACPI: Interpreter enabled [ 27.650555] ACPI: (supports S0 S3 S4 S5) [ 27.650567] ACPI: Using IOAPIC for interrupt routing [ 27.660814] ACPI: EC: GPE=0x17, ports=0x66, 0x62 [ 27.660847] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 27.660855] PCI: Probing PCI hardware (bus 00) [ 27.662910] PCI: Transparent bridge - 0000:00:1e.0 [ 27.663005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 27.663274] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 27.663375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 27.663468] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 27.663563] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 27.663658] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 27.663763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 27.666304] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 27.666400] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 27.666479] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 27.666554] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 27.666628] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 27.666703] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 27.666778] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 27.666854] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 27.666935] Linux Plug and Play Support v0.97 (c) Adam Belay [ 27.666941] pnp: PnP ACPI init [ 27.666946] ACPI: bus type pnp registered [ 27.669136] pnp: PnP ACPI: found 10 devices [ 27.669137] ACPI: ACPI bus type pnp unregistered [ 27.669172] PCI: Using ACPI for IRQ routing [ 27.669173] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 27.669277] NET: Registered protocol family 8 [ 27.669279] NET: Registered protocol family 20 [ 27.669290] PCI-GART: No AMD northbridge found. [ 27.669295] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 27.669297] hpet0: 3 64-bit timers, 14318180 Hz [ 27.670327] pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 27.670329] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 27.670331] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 27.670333] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 27.670338] pnp: 00:06: iomem range 0xfed00000-0xfed003ff could not be reserved [ 27.670370] Time: hpet clocksource has been installed. [ 27.670558] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0 [ 27.670623] PCI: Bridge: 0000:00:01.0 [ 27.670625] IO window: 2000-2fff [ 27.670628] MEM window: cc000000-ceffffff [ 27.670630] PREFETCH window: d0000000-dfffffff [ 27.670633] PCI: Bridge: 0000:00:1c.0 [ 27.670635] IO window: 3000-3fff [ 27.670640] MEM window: f2000000-f3ffffff [ 27.670644] PREFETCH window: f0000000-f1ffffff [ 27.670649] PCI: Bridge: 0000:00:1c.1 [ 27.670651] IO window: 4000-4fff [ 27.670657] MEM window: f4000000-f40fffff [ 27.670660] PREFETCH window: disabled. [ 27.670665] PCI: Bridge: 0000:00:1c.2 [ 27.670666] IO window: disabled. [ 27.670671] MEM window: disabled. [ 27.670674] PREFETCH window: disabled. [ 27.670679] PCI: Bridge: 0000:00:1c.3 [ 27.670680] IO window: disabled. [ 27.670686] MEM window: f4100000-f41fffff [ 27.670689] PREFETCH window: disabled. [ 27.670695] PCI: Bridge: 0000:00:1e.0 [ 27.670695] IO window: disabled. [ 27.670701] MEM window: f4200000-f42fffff [ 27.670704] PREFETCH window: disabled. [ 27.670716] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 27.670720] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 27.670740] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 27.670745] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 27.670766] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 27.670771] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 27.670792] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 27.670796] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 27.670818] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 27.670822] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 27.670834] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 27.670842] NET: Registered protocol family 2 [ 27.718367] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 27.719340] TCP established hash table entries: 524288 (order: 11, 12582912 bytes) [ 27.725027] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 27.725600] TCP: Hash tables configured (established 524288 bind 65536) [ 27.725602] TCP reno registered [ 27.738394] checking if image is initramfs... it is [ 28.261483] Freeing initrd memory: 7184k freed [ 28.263883] Simple Boot Flag at 0x36 set to 0x1 [ 28.264314] audit: initializing netlink socket (disabled) [ 28.264325] audit(1205918635.432:1): initialized [ 28.265885] VFS: Disk quotas dquot_6.5.1 [ 28.265923] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 28.265994] io scheduler noop registered [ 28.265996] io scheduler anticipatory registered [ 28.265997] io scheduler deadline registered [ 28.266063] io scheduler cfq registered (default) [ 28.272088] Boot video device is 0000:01:00.0 [ 28.272201] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 28.272228] assign_interrupt_mode Found MSI capability [ 28.272231] Allocate Port Service[0000:00:01.0:pcie00] [ 28.272257] Allocate Port Service[0000:00:01.0:pcie02] [ 28.272313] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 28.272366] assign_interrupt_mode Found MSI capability [ 28.272367] Allocate Port Service[0000:00:1c.0:pcie00] [ 28.272391] Allocate Port Service[0000:00:1c.0:pcie02] [ 28.272476] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 28.272529] assign_interrupt_mode Found MSI capability [ 28.272530] Allocate Port Service[0000:00:1c.1:pcie00] [ 28.272551] Allocate Port Service[0000:00:1c.1:pcie02] [ 28.272634] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 28.272687] assign_interrupt_mode Found MSI capability [ 28.272688] Allocate Port Service[0000:00:1c.2:pcie00] [ 28.272710] Allocate Port Service[0000:00:1c.2:pcie02] [ 28.272796] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 28.272849] assign_interrupt_mode Found MSI capability [ 28.272850] Allocate Port Service[0000:00:1c.3:pcie00] [ 28.272873] Allocate Port Service[0000:00:1c.3:pcie02] [ 28.287461] Real Time Clock Driver v1.12ac [ 28.287633] hpet_resources: 0xfed00000 is busy [ 28.287650] Linux agpgart interface v0.102 (c) Dave Jones [ 28.287652] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 28.288358] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 28.288453] input: Macintosh mouse button emulation as /class/input/input0 [ 28.288506] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 28.288774] i8042.c: Detected active multiplexing controller, rev 1.1. [ 28.288848] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 28.288851] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 28.288852] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 28.288854] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 28.288855] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 28.288984] mice: PS/2 mouse device common for all mice [ 28.289097] TCP cubic registered [ 28.289154] NET: Registered protocol family 1 [ 28.289346] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 28.289351] Freeing unused kernel memory: 296k freed [ 28.297418] input: AT Translated Set 2 keyboard as /class/input/input1 [ 29.411422] AppArmor: AppArmor initialized<5>audit(1205918636.584:2): type=1505 info="AppArmor initialized" pid=1265 [ 29.418621] fuse init (API version 7.8) [ 29.424952] Failure registering capabilities with primary security module. [ 29.463730] ACPI Error (exnames-0219): Bad character 01 in name, at ffffc20000609067 [20070126] [ 29.463734] ACPI Exception (dsutils-0735): AE_AML_BAD_NAME, While creating Arg 3 [20070126] [ 29.463738] ACPI Error (psparse-0551): Method parse/execution failed [\_PR_.CPU0._OSC] (Node ffff810139fed220), AE_AML_BAD_NAME [ 29.463769] ACPI Error (psparse-0551): Method parse/execution failed [\_PR_.CPU0._PDC] (Node ffff810139fed200), AE_AML_BAD_NAME [ 29.463995] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 29.464161] ACPI: SSDT BFED09A4, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20061109) [ 29.464309] ACPI: SSDT BFED0663, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20061109) [ 29.464643] ACPI Error (psargs-0355): [\_PR_.CPU0._CST] Namespace lookup failure, AE_NOT_FOUND [ 29.464647] ACPI Error (psparse-0551): Method parse/execution failed [\_PR_.CPU1._CST] (Node ffff810139239c40), AE_NOT_FOUND [ 29.464676] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 29.474281] ACPI: Thermal Zone [TZS0] (57 C) [ 29.477110] ACPI: Thermal Zone [TZS1] (57 C) [ 29.783571] usbcore: registered new interface driver usbfs [ 29.783588] usbcore: registered new interface driver hub [ 29.783603] usbcore: registered new device driver usb [ 29.784044] USB Universal Host Controller Interface driver v3.0 [ 29.784202] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 29.784213] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 29.784222] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 29.784354] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 29.784568] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840 [ 29.784649] usb usb1: configuration #1 chosen from 1 choice [ 29.784665] hub 1-0:1.0: USB hub found [ 29.784670] hub 1-0:1.0: 2 ports detected [ 29.807555] SCSI subsystem initialized [ 29.830972] libata version 2.21 loaded. [ 29.887291] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 29.887304] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 29.887308] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 29.887408] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 29.887452] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860 [ 29.887699] usb usb2: configuration #1 chosen from 1 choice [ 29.887801] hub 2-0:1.0: USB hub found [ 29.887806] hub 2-0:1.0: 2 ports detected [ 29.991106] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 29.992696] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 29.992702] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 29.992917] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 29.992952] ehci_hcd 0000:00:1a.7: debug port 1 [ 29.992957] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 29.992966] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4505c00 [ 29.996848] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 29.997111] usb usb3: configuration #1 chosen from 1 choice [ 29.997227] hub 3-0:1.0: USB hub found [ 29.997233] hub 3-0:1.0: 4 ports detected [ 30.098936] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 30.098945] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 30.098948] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 30.099060] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 30.099088] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 30.099347] usb usb4: configuration #1 chosen from 1 choice [ 30.099473] hub 4-0:1.0: USB hub found [ 30.099477] hub 4-0:1.0: 2 ports detected [ 30.202778] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 30.202784] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 30.202787] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 30.202907] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 30.202933] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0 [ 30.203221] usb usb5: configuration #1 chosen from 1 choice [ 30.203351] hub 5-0:1.0: USB hub found [ 30.203356] hub 5-0:1.0: 2 ports detected [ 30.306653] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 30.306659] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 30.306662] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 30.306796] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 30.306821] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 30.307144] usb usb6: configuration #1 chosen from 1 choice [ 30.307291] hub 6-0:1.0: USB hub found [ 30.307295] hub 6-0:1.0: 2 ports detected [ 30.410549] ahci 0000:00:1f.2: version 2.2 [ 30.410569] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 20 [ 30.733706] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 30.901006] usb 2-1: configuration #1 chosen from 1 choice [ 31.412694] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 31.412696] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 31.412701] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 31.412864] scsi0 : ahci [ 31.412896] scsi1 : ahci [ 31.412918] scsi2 : ahci [ 31.412979] ata1: SATA max UDMA/133 cmd 0xffffc20001450100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 20 [ 31.412982] ata2: SATA max UDMA/133 cmd 0xffffc20001450180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 20 [ 31.412985] ata3: SATA max UDMA/133 cmd 0xffffc20001450200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 20 [ 31.895940] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 31.896331] ata1.00: ATA-8: WDC WD2500BEVS-60UST0, 01.01A01, max UDMA/100 [ 31.896333] ata1.00: 488397168 sectors, multi 16: LBA48 [ 31.896783] ata1.00: configured for UDMA/100 [ 32.207464] ata2: SATA link down (SStatus 0 SControl 300) [ 32.518990] ata3: SATA link down (SStatus 0 SControl 300) [ 32.519055] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-6 01.0 PQ: 0 ANSI: 5 [ 32.519418] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 32.520732] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 32.520737] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 32.521035] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 32.521068] ehci_hcd 0000:00:1d.7: debug port 1 [ 32.521074] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 32.521079] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4506000 [ 32.524958] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 32.525378] usb usb7: configuration #1 chosen from 1 choice [ 32.525578] hub 7-0:1.0: USB hub found [ 32.525583] hub 7-0:1.0: 6 ports detected [ 32.529439] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 32.529446] sd 0:0:0:0: [sda] Write Protect is off [ 32.529447] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 32.529456] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.529487] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 32.529492] sd 0:0:0:0: [sda] Write Protect is off [ 32.529494] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 32.529502] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.529504] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 32.611428] sd 0:0:0:0: [sda] Attached SCSI disk [ 32.613409] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 32.626916] ACPI: PCI Interrupt 0000:08:09.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 32.680013] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f4200000-f42007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 32.684301] ata_piix 0000:00:1f.1: version 2.11 [ 32.684313] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 32.684338] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 32.684749] scsi3 : ata_piix [ 32.685040] scsi4 : ata_piix [ 32.685088] ata4: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011830 irq 14 [ 32.685090] ata5: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011838 irq 15 [ 33.018316] kjournald starting. Commit interval 5 seconds [ 33.018322] EXT3-fs: mounted filesystem with ordered data mode. [ 33.026580] ata4.00: ATAPI: Slimtype DVD A DS8A1H, WH66, max MWDMA2 [ 33.066157] usb 7-5: new high speed USB device using ehci_hcd and address 2 [ 33.211006] usb 7-5: configuration #1 chosen from 1 choice [ 33.222252] ata4.00: configured for MWDMA2 [ 33.391009] scsi 3:0:0:0: CD-ROM Slimtype DVD A DS8A1H WH66 PQ: 0 ANSI: 5 [ 33.391045] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 33.813019] usb 6-2: new full speed USB device using uhci_hcd and address 2 [ 33.952856] ieee1394: Host added: ID:BUS[0-00:1023] GUID[08e40a007d3d5007] [ 33.991810] usb 6-2: configuration #1 chosen from 1 choice [ 40.753673] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 40.757523] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 40.846703] sdhci: Secure Digital Host Controller Interface driver [ 40.846706] sdhci: Copyright(c) Pierre Ossman [ 40.846745] sdhci: SDHCI controller found at 0000:08:09.1 [1180:0822] (rev 22) [ 40.846766] ACPI: PCI Interrupt 0000:08:09.1[B] -> GSI 18 (level, low) -> IRQ 18 [ 40.848445] mmc0: SDHCI at 0xf4200800 irq 18 DMA [ 40.956140] Bluetooth: Core ver 2.11 [ 40.956174] NET: Registered protocol family 31 [ 40.956175] Bluetooth: HCI device and connection manager initialized [ 40.956177] Bluetooth: HCI socket layer initialized [ 40.958849] Bluetooth: HCI USB driver ver 2.9 [ 40.960518] usbcore: registered new interface driver hci_usb [ 41.016812] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 41.016825] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 41.018276] sky2 0000:05:00.0: v1.18 addr 0xf4000000 irq 17 Yukon-FE (0xb7) rev 3 [ 41.018425] sky2 eth0: addr 00:1d:72:4a:7a:ac [ 41.036653] Linux video capture interface: v2.00 [ 41.041449] input: PS/2 Mouse as /class/input/input2 [ 41.056816] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 [ 41.058779] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 41.058781] Uniform CD-ROM driver Revision: 3.20 [ 41.058908] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 41.167994] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b016) [ 41.169692] usbcore: registered new interface driver uvcvideo [ 41.169695] USB Video Class driver (v0.1.0) [ 41.170949] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.0 [ 41.170950] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 41.171013] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 41.171022] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 41.172438] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 41.409066] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 41.410468] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 41.453452] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels [ 41.453615] wmaster0: Selected rate control algorithm 'iwl-4965-rs' [ 42.168325] lp: driver loaded but no devices found [ 42.737958] EXT3 FS on sda3, internal journal