[ 0.000000] Linux version 2.6.22-12-generic (buildd@vernadsky) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23 18:11:30 GMT 2007 (Ubuntu 2.6.22-12.39-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005f681400 (usable) [ 0.000000] BIOS-e820: 000000005f681400 - 0000000060000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved) [ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 630MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 390785) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 390785 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 390785 [ 0.000000] On node 0 totalpages: 390785 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1261 pages used for memmap [ 0.000000] HighMem zone: 160148 pages, LIFO batch:31 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FC090, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT 5F681A0E, 0044 (r1 DELL M07 27D60C12 ASL 61) [ 0.000000] ACPI: FACP 5F682800, 0074 (r1 DELL M07 27D60C12 ASL 61) [ 0.000000] ACPI: DSDT 5F683400, 4D23 (r1 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 5F691C00, 0040 [ 0.000000] ACPI: HPET 5F682F00, 0038 (r1 DELL M07 1 ASL 61) [ 0.000000] ACPI: APIC 5F683000, 0068 (r1 DELL M07 27D60C12 ASL 47) [ 0.000000] ACPI: ASF! 5F682C00, 005B (r16 DELL M07 27D60C12 ASL 61) [ 0.000000] ACPI: MCFG 5F682FC0, 003E (r16 DELL M07 27D60C12 ASL 61) [ 0.000000] ACPI: SLIC 5F68309C, 0024 (r1 DELL M07 27D60C12 ASL 61) [ 0.000000] ACPI: TCPA 5F683300, 0032 (r1 DELL M07 27D60C12 ASL 61) [ 0.000000] ACPI: SSDT 5F681A95, 04DC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 60000000:90000000) [ 0.000000] Built 1 zonelists. Total pages: 387732 [ 0.000000] Kernel command line: root=UUID=e57244a2-c726-4ed6-b461-95c5c45a3b5a ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1197.375 MHz processor. [ 6.918528] Console: colour VGA+ 80x25 [ 6.918871] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 6.919373] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 7.011298] Memory: 1537864k/1563140k available (2017k kernel code, 24004k reserved, 918k data, 364k init, 645636k highmem) [ 7.011312] virtual kernel memory layout: [ 7.011314] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 7.011316] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 7.011318] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 7.011319] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 7.011321] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 7.011323] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB) [ 7.011325] .text : 0xc0100000 - 0xc02f8456 (2017 kB) [ 7.011330] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 7.011382] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 7.011584] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 7.011593] hpet0: 3 64-bit timers, 14318180 Hz [ 7.092594] Calibrating delay using timer specific routine.. 2397.73 BogoMIPS (lpj=4795476) [ 7.092626] Security Framework v1.0.0 initialized [ 7.092637] SELinux: Disabled at boot. [ 7.092657] Mount-cache hash table entries: 512 [ 7.092825] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 7.092837] monitor/mwait feature present. [ 7.092839] using mwait in idle threads. [ 7.092845] CPU: L1 I cache: 32K, L1 D cache: 32K [ 7.092849] CPU: L2 cache: 2048K [ 7.092853] CPU: Physical Processor ID: 0 [ 7.092855] CPU: Processor Core ID: 0 [ 7.092858] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 [ 7.092871] Compat vDSO mapped to ffffe000. [ 7.092889] Checking 'hlt' instruction... OK. [ 7.108753] SMP alternatives: switching to UP code [ 7.109389] Early unpacking initramfs... done [ 7.591872] ACPI: Core revision 20070126 [ 7.591950] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 7.595675] CPU0: Intel Genuine Intel(R) CPU U2500 @ 1.20GHz stepping 08 [ 7.595699] SMP alternatives: switching to SMP code [ 7.595842] Booting processor 1/1 eip 3000 [ 9.524984] Initializing CPU#1 [ 9.604528] Calibrating delay using timer specific routine.. 2394.67 BogoMIPS (lpj=4789343) [ 9.604537] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 9.604546] monitor/mwait feature present. [ 9.604550] CPU: L1 I cache: 32K, L1 D cache: 32K [ 9.604553] CPU: L2 cache: 2048K [ 9.604556] CPU: Physical Processor ID: 0 [ 9.604558] CPU: Processor Core ID: 1 [ 9.604561] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 [ 7.689140] CPU1: Intel Genuine Intel(R) CPU U2500 @ 1.20GHz stepping 08 [ 7.689171] Total of 2 processors activated (4792.40 BogoMIPS). [ 7.689379] ENABLING IO-APIC IRQs [ 7.689601] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 7.836490] checking TSC synchronization [CPU#0 -> CPU#1]: [ 7.856496] Measured 2294860050 cycles TSC warp between CPUs, turning off TSC clock. [ 0.716000] Marking TSC unstable due to: check_tsc_sync_source failed. [ 0.720000] Brought up 2 CPUs [ 0.836000] migration_cost=4000 [ 0.836000] Booting paravirtualized kernel on bare hardware [ 0.836000] Time: 5:36:03 Date: 09/05/107 [ 0.836000] NET: Registered protocol family 16 [ 0.836000] EISA bus registered [ 0.836000] ACPI: bus type pci registered [ 0.868000] PCI: PCI BIOS revision 2.10 entry at 0xfac96, last bus=12 [ 0.868000] PCI: Using configuration type 1 [ 0.868000] Setting up standard PCI resources [ 0.872000] ACPI: EC: Look up EC in DSDT [ 0.892000] ACPI Warning (tbutils-0158): Incorrect checksum in table [TCPA] - 00, should be 93 [20070126] [ 0.892000] ACPI: SSDT 5F681A52, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) [ 0.892000] ACPI: Interpreter enabled [ 0.892000] ACPI: (supports S0 S3 S4 S5) [ 0.892000] ACPI: Using IOAPIC for interrupt routing [ 0.928000] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.928000] PCI: Probing PCI hardware (bus 00) [ 0.932000] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.932000] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 0.932000] PCI: Transparent bridge - 0000:00:1e.0 [ 0.932000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.932000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.932000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.932000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.932000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT] [ 0.956000] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.956000] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7) [ 0.956000] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *3 [ 0.956000] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) [ 0.956000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.956000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.956000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.956000] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.956000] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.956000] pnp: PnP ACPI init [ 0.956000] ACPI: bus type pnp registered [ 1.012000] pnp: PnP ACPI: found 13 devices [ 1.012000] ACPI: ACPI bus type pnp unregistered [ 1.012000] PnPBIOS: Disabled by ACPI PNP [ 1.012000] PCI: Using ACPI for IRQ routing [ 1.012000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 1.060000] NET: Registered protocol family 8 [ 1.060000] NET: Registered protocol family 20 [ 1.060000] pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved [ 1.060000] pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 1.060000] pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 1.060000] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 1.060000] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 1.060000] pnp: 00:02: ioport range 0x1000-0x1005 has been reserved [ 1.060000] pnp: 00:02: ioport range 0x1008-0x100f has been reserved [ 1.060000] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved [ 1.060000] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved [ 1.060000] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved [ 1.060000] pnp: 00:03: ioport range 0x1060-0x107f has been reserved [ 1.060000] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved [ 1.060000] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved [ 1.060000] pnp: 00:08: ioport range 0xc80-0xcaf has been reserved [ 1.060000] pnp: 00:08: ioport range 0xcc0-0xcff could not be reserved [ 1.060000] pnp: 00:08: ioport range 0x910-0x91f has been reserved [ 1.060000] pnp: 00:08: ioport range 0x920-0x92f has been reserved [ 1.060000] pnp: 00:08: ioport range 0xcbc-0xcbf has been reserved [ 1.060000] pnp: 00:08: ioport range 0x930-0x97f has been reserved [ 1.060000] pnp: 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved [ 1.060000] pnp: 00:0c: ioport range 0xcb0-0xcbb has been reserved [ 1.060000] pnp: 00:0c: iomem range 0xfed40000-0xfed44fff could not be reserved [ 1.064000] Time: hpet clocksource has been installed. [ 1.064000] Switched to high resolution mode on CPU 0 [ 1.064000] Switched to high resolution mode on CPU 1 [ 1.092000] PCI: Bridge: 0000:00:1c.0 [ 1.092000] IO window: disabled. [ 1.092000] MEM window: disabled. [ 1.092000] PREFETCH window: disabled. [ 1.092000] PCI: Bridge: 0000:00:1c.1 [ 1.092000] IO window: disabled. [ 1.092000] MEM window: efd00000-efdfffff [ 1.092000] PREFETCH window: disabled. [ 1.092000] PCI: Bridge: 0000:00:1c.2 [ 1.092000] IO window: disabled. [ 1.092000] MEM window: efc00000-efcfffff [ 1.092000] PREFETCH window: disabled. [ 1.092000] PCI: Bus 3, cardbus bridge: 0000:02:01.0 [ 1.092000] IO window: 00002000-000020ff [ 1.092000] IO window: 00002400-000024ff [ 1.092000] PREFETCH window: 70000000-73ffffff [ 1.092000] MEM window: 74000000-77ffffff [ 1.092000] PCI: Bridge: 0000:00:1e.0 [ 1.092000] IO window: 2000-2fff [ 1.092000] MEM window: efb00000-efbfffff [ 1.092000] PREFETCH window: 70000000-73ffffff [ 1.092000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.092000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.092000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 1.092000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 1.092000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 1.092000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 1.092000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 1.092000] PCI: Enabling device 0000:02:01.0 (0000 -> 0003) [ 1.092000] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 1.092000] NET: Registered protocol family 2 [ 1.136000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.136000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 1.136000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.136000] TCP: Hash tables configured (established 131072 bind 65536) [ 1.136000] TCP reno registered [ 1.152000] checking if image is initramfs... it is [ 2.112000] Freeing initrd memory: 7053k freed [ 2.112000] audit: initializing netlink socket (disabled) [ 2.112000] audit(1191562564.064:1): initialized [ 2.112000] highmem bounce pool size: 64 pages [ 2.116000] VFS: Disk quotas dquot_6.5.1 [ 2.116000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.116000] io scheduler noop registered [ 2.116000] io scheduler anticipatory registered [ 2.116000] io scheduler deadline registered [ 2.116000] io scheduler cfq registered (default) [ 2.116000] Boot video device is 0000:00:02.0 [ 2.116000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 2.116000] assign_interrupt_mode Found MSI capability [ 2.116000] Allocate Port Service[0000:00:1c.0:pcie00] [ 2.116000] Allocate Port Service[0000:00:1c.0:pcie02] [ 2.116000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 2.116000] assign_interrupt_mode Found MSI capability [ 2.116000] Allocate Port Service[0000:00:1c.1:pcie00] [ 2.116000] Allocate Port Service[0000:00:1c.1:pcie02] [ 2.116000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 2.116000] assign_interrupt_mode Found MSI capability [ 2.116000] Allocate Port Service[0000:00:1c.2:pcie00] [ 2.116000] Allocate Port Service[0000:00:1c.2:pcie02] [ 2.116000] isapnp: Scanning for PnP cards... [ 2.472000] isapnp: No Plug & Play device found [ 2.504000] Real Time Clock Driver v1.12ac [ 2.504000] hpet_resources: 0xfed00000 is busy [ 2.504000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 2.504000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 2.504000] input: Macintosh mouse button emulation as /class/input/input0 [ 2.504000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.508000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.508000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.508000] mice: PS/2 mouse device common for all mice [ 2.508000] EISA: Probing bus 0 at eisa.0 [ 2.508000] EISA: Cannot allocate resource for mainboard [ 2.508000] Cannot allocate resource for EISA slot 1 [ 2.508000] Cannot allocate resource for EISA slot 2 [ 2.508000] EISA: Detected 0 cards. [ 2.508000] TCP cubic registered [ 2.508000] NET: Registered protocol family 1 [ 2.508000] Using IPI No-Shortcut mode [ 2.512000] Magic number: 11:507:617 [ 2.512000] hash matches device ptye7 [ 2.512000] hash matches device ptyba [ 2.512000] Freeing unused kernel memory: 364k freed [ 2.512000] input: AT Translated Set 2 keyboard as /class/input/input1 [ 3.812000] AppArmor: AppArmor initialized<5>audit(1191562565.564:2): type=1505 info="AppArmor initialized" pid=1250 [ 3.820000] fuse init (API version 7.8) [ 3.828000] Failure registering capabilities with primary security module. [ 3.864000] ACPI: SSDT 5F6821BC, 01C0 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 3.864000] ACPI: SSDT 5F681F71, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 3.864000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 3.864000] ACPI: Processor [CPU0] (supports 8 throttling states) [ 3.864000] ACPI: SSDT 5F68237C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 3.864000] ACPI: SSDT 5F682137, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 3.864000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 3.864000] ACPI: Processor [CPU1] (supports 8 throttling states) [ 3.872000] ACPI: Thermal Zone [THM] (25 C) [ 4.484000] usbcore: registered new interface driver usbfs [ 4.484000] usbcore: registered new interface driver hub [ 4.484000] usbcore: registered new device driver usb [ 4.484000] USB Universal Host Controller Interface driver v3.0 [ 4.484000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 4.484000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 4.484000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.484000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 4.484000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80 [ 4.484000] usb usb1: configuration #1 chosen from 1 choice [ 4.484000] hub 1-0:1.0: USB hub found [ 4.484000] hub 1-0:1.0: 2 ports detected [ 4.492000] SCSI subsystem initialized [ 4.560000] libata version 2.21 loaded. [ 4.588000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 4.588000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 4.588000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.588000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 4.588000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60 [ 4.588000] usb usb2: configuration #1 chosen from 1 choice [ 4.588000] hub 2-0:1.0: USB hub found [ 4.588000] hub 2-0:1.0: 2 ports detected [ 4.692000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 4.692000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 4.692000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.692000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 4.692000] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40 [ 4.692000] usb usb3: configuration #1 chosen from 1 choice [ 4.692000] hub 3-0:1.0: USB hub found [ 4.692000] hub 3-0:1.0: 2 ports detected [ 4.796000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23 [ 4.796000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 4.796000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 4.796000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 4.796000] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20 [ 4.796000] usb usb4: configuration #1 chosen from 1 choice [ 4.796000] hub 4-0:1.0: USB hub found [ 4.796000] hub 4-0:1.0: 2 ports detected [ 4.828000] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 4.904000] ata_piix 0000:00:1f.1: version 2.11 [ 4.904000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 4.904000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 4.904000] scsi0 : ata_piix [ 4.904000] scsi1 : ata_piix [ 4.904000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14 [ 4.904000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15 [ 4.972000] usb 1-2: configuration #1 chosen from 1 choice [ 4.976000] hub 1-2:1.0: USB hub found [ 4.976000] hub 1-2:1.0: 4 ports detected [ 5.000000] Clocksource tsc unstable (delta = -170536585 ns) [ 5.068000] ata1.00: ATA-6: TOSHIBA MK6008GAH, BU011A, max UDMA/100 [ 5.068000] ata1.00: 117210240 sectors, multi 8: LBA48 [ 5.076000] ata1.00: configured for UDMA/100 [ 5.076000] ata2: port disabled. ignoring. [ 5.076000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6008GA BU01 PQ: 0 ANSI: 5 [ 5.076000] tg3.c:v3.77 (May 31, 2007) [ 5.076000] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 5.076000] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 5.096000] eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:18:8b:b8:e6:57 [ 5.096000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 5.096000] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 5.096000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 5.096000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 5.096000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.096000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 5.096000] ehci_hcd 0000:00:1d.7: debug port 1 [ 5.096000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 5.096000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000 [ 5.100000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.100000] usb usb5: configuration #1 chosen from 1 choice [ 5.100000] hub 5-0:1.0: USB hub found [ 5.100000] hub 5-0:1.0: 8 ports detected [ 5.204000] ACPI: PCI Interrupt 0000:02:01.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 5.256000] hub 1-2:1.0: hub_port_status failed (err = -71) [ 5.256000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[efbff800-efbfffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 5.256000] hub 1-2:1.0: hub_port_status failed (err = -71) [ 5.256000] hub 1-2:1.0: hub_port_status failed (err = -71) [ 5.256000] hub 1-2:1.0: hub_port_status failed (err = -71) [ 5.260000] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 5.260000] sd 0:0:0:0: [sda] Write Protect is off [ 5.260000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.260000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.260000] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 5.260000] sd 0:0:0:0: [sda] Write Protect is off [ 5.260000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.260000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.260000] sda: sda1 sda2 sda3 [ 5.320000] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.324000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.544000] Attempting manual resume [ 5.544000] swsusp: Resume From Partition 8:2 [ 5.544000] PM: Checking swsusp image. [ 5.544000] PM: Resume from disk failed. [ 5.584000] kjournald starting. Commit interval 5 seconds [ 5.584000] EXT3-fs: mounted filesystem with ordered data mode. [ 5.684000] usb 1-2: USB disconnect, address 2 [ 5.924000] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 6.076000] usb 1-2: configuration #1 chosen from 1 choice [ 6.080000] hub 1-2:1.0: USB hub found [ 6.084000] hub 1-2:1.0: 4 ports detected [ 6.432000] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 6.536000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[4a4fc0000220e050] [ 6.604000] usb 3-1: configuration #1 chosen from 1 choice [ 6.836000] usb 1-2.3: new full speed USB device using uhci_hcd and address 4 [ 6.948000] usb 1-2.3: configuration #1 chosen from 1 choice [ 6.948000] hub 1-2.3:1.0: USB hub found [ 6.952000] hub 1-2.3:1.0: 3 ports detected [ 7.284000] usb 1-2.4: new full speed USB device using uhci_hcd and address 5 [ 7.436000] usb 1-2.4: configuration #1 chosen from 1 choice [ 7.644000] usb 1-2.3.2: new full speed USB device using uhci_hcd and address 6 [ 7.764000] usb 1-2.3.2: configuration #1 chosen from 1 choice [ 15.952000] Linux agpgart interface v0.102 (c) Dave Jones [ 16.000000] agpgart: Detected an Intel 945GM Chipset. [ 16.004000] agpgart: Detected 7932K stolen memory. [ 16.024000] agpgart: AGP aperture is 256M @ 0xd0000000 [ 16.060000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 16.064000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.568000] iTCO_vendor_support: vendor-support=0 [ 16.580000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 16.872000] input: PS/2 Mouse as /class/input/input2 [ 16.892000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 [ 16.896000] input: PC Speaker as /class/input/input4 [ 16.896000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 16.896000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 16.928000] intel_rng: FWH not detected [ 16.980000] Yenta: CardBus bridge found at 0000:02:01.0 [1028:01d6] [ 17.060000] Bluetooth: Core ver 2.11 [ 17.060000] NET: Registered protocol family 31 [ 17.060000] Bluetooth: HCI device and connection manager initialized [ 17.060000] Bluetooth: HCI socket layer initialized [ 17.084000] ieee80211_crypt: registered algorithm 'NULL' [ 17.088000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 17.088000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 17.108000] Yenta: ISA IRQ mask 0x04b8, PCI irq 19 [ 17.108000] Socket status: 30000006 [ 17.108000] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 17.108000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 17.108000] cs: IO port probe 0x2000-0x2fff: clean. [ 17.108000] pcmcia: parent PCI bridge Memory window: 0xefb00000 - 0xefbfffff [ 17.108000] pcmcia: parent PCI bridge Memory window: 0x70000000 - 0x73ffffff [ 17.116000] Bluetooth: HCI USB driver ver 2.9 [ 17.116000] usbcore: registered new interface driver hci_usb [ 17.184000] usbcore: registered new interface driver hiddev [ 17.208000] input: Logitech Optical USB Mouse as /class/input/input5 [ 17.208000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.2-1 [ 17.208000] usbcore: registered new interface driver usbhid [ 17.208000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 17.228000] sdhci: Secure Digital Host Controller Interface driver [ 17.228000] sdhci: Copyright(c) Pierre Ossman [ 17.228000] sdhci: SDHCI controller found at 0000:02:01.2 [1180:0822] (rev 18) [ 17.228000] ACPI: PCI Interrupt 0000:02:01.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 17.232000] mmc0: SDHCI at 0xefbff700 irq 18 DMA [ 17.324000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1 [ 17.324000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 17.324000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 17.324000] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 17.324000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 17.512000] cs: IO port probe 0x100-0x3af: clean. [ 17.512000] cs: IO port probe 0x3e0-0x4ff: clean. [ 17.512000] cs: IO port probe 0x820-0x8ff: clean. [ 17.512000] cs: IO port probe 0xc00-0xcf7: clean. [ 17.516000] cs: IO port probe 0xa00-0xaff: clean. [ 17.696000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 17.696000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 18.328000] lp: driver loaded but no devices found [ 18.456000] Adding 1052248k swap on /dev/sda2. Priority:-1 extents:1 across:1052248k [ 18.772000] EXT3 FS on sda1, internal journal [ 19.232000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels) [ 19.576000] kjournald starting. Commit interval 5 seconds [ 19.576000] EXT3 FS on sda3, internal journal [ 19.576000] EXT3-fs: mounted filesystem with ordered data mode. [ 20.984000] input: Lid Switch as /class/input/input6 [ 20.984000] ACPI: Lid Switch [LID] [ 20.984000] input: Power Button (CM) as /class/input/input7 [ 20.984000] ACPI: Power Button (CM) [PBTN] [ 20.984000] input: Sleep Button (CM) as /class/input/input8 [ 20.984000] ACPI: Sleep Button (CM) [SBTN] [ 21.052000] ACPI: ACPI Dock Station Driver [ 21.168000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 21.168000] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 21.204000] ACPI: Battery Slot [BAT0] (battery present) [ 21.220000] ACPI: AC Adapter [AC] (on-line) [ 22.992000] ppdev: user-space parallel port driver [ 23.396000] PM: Writing back config space on device 0000:09:00.0 at offset c (was 4c160000, writing 0) [ 23.396000] PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100506, writing 100106) [ 23.800000] audit(1191562586.429:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5058 profile="/usr/sbin/cupsd" [ 24.096000] apm: BIOS not found. [ 25.028000] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 25.028000] tg3: eth0: Flow control is on for TX and on for RX. [ 25.976000] Failure registering capabilities with primary security module. [ 26.248000] Bluetooth: L2CAP ver 2.8 [ 26.248000] Bluetooth: L2CAP socket layer initialized [ 26.352000] Bluetooth: RFCOMM socket layer initialized [ 26.352000] Bluetooth: RFCOMM TTY layer initialized [ 26.352000] Bluetooth: RFCOMM ver 1.8 [ 27.612000] [drm] Initialized drm 1.1.0 20060810 [ 27.616000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 27.616000] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 30.956000] NET: Registered protocol family 17 [ 35.716000] NET: Registered protocol family 10 [ 35.716000] lo: Disabled Privacy Extensions [ 35.716000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 45.784000] eth0: no IPv6 routers present