[ 0.000000] Linux version 2.6.22-11-generic (buildd@rothera) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Fri Sep 7 05:07:05 GMT 2007 (Ubuntu 2.6.22-11.32-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000004ffda000 (usable) [ 0.000000] BIOS-e820: 000000004ffda000 - 0000000050000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 383MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 327642) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 327642 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 327642 [ 0.000000] On node 0 totalpages: 327642 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 767 pages used for memmap [ 0.000000] HighMem zone: 97499 pages, LIFO batch:31 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FC9B0, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT 4FFDA7D3, 0040 (r1 DELL CPi R 27D5031D ASL 61) [ 0.000000] ACPI: FACP 4FFDB400, 0074 (r1 DELL CPi R 27D5031D ASL 61) [ 0.000000] ACPI: DSDT 4FFDC000, 25EB (r1 INT430 SYSFexxx 1001 MSFT 100000E) [ 0.000000] ACPI: FACS 4FFEA800, 0040 [ 0.000000] ACPI: APIC 4FFDBC00, 0068 (r1 DELL CPi R 27D5031D ASL 47) [ 0.000000] ACPI: MCFG 4FFDBBC0, 003E (r16 DELL CPi R 27D5031D ASL 61) [ 0.000000] ACPI: BOOT 4FFDB7C0, 0028 (r1 DELL CPi R 27D5031D ASL 61) [ 0.000000] ACPI: SSDT 4FFDABE6, 0280 (r1 PmRef Cpu0Ist 3000 INTL 20030522) [ 0.000000] ACPI: SSDT 4FFDAA0E, 01D8 (r1 PmRef Cpu0Cst 3001 INTL 20030522) [ 0.000000] ACPI: SSDT 4FFDA813, 01FB (r1 PmRef CpuPm 3000 INTL 20030522) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 50000000:90000000) [ 0.000000] Built 1 zonelists. Total pages: 325083 [ 0.000000] Kernel command line: root=UUID=2813c8bf-5b0d-4ea9-902f-9ddd8e58d750 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 798.077 MHz processor. [ 27.970470] Console: colour VGA+ 80x25 [ 27.970911] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 27.971630] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 28.060002] Memory: 1287196k/1310568k available (2016k kernel code, 22028k reserved, 918k data, 364k init, 393064k highmem) [ 28.060022] virtual kernel memory layout: [ 28.060025] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 28.060028] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 28.060031] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 28.060033] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 28.060036] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 28.060039] .data : 0xc02f8366 - 0xc03ddea4 ( 918 kB) [ 28.060041] .text : 0xc0100000 - 0xc02f8366 (2016 kB) [ 28.060049] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 28.060121] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 28.140153] Calibrating delay using timer specific routine.. 1598.18 BogoMIPS (lpj=3196369) [ 28.140203] Security Framework v1.0.0 initialized [ 28.140216] SELinux: Disabled at boot. [ 28.140244] Mount-cache hash table entries: 512 [ 28.140479] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 [ 28.140501] CPU: L1 I cache: 32K, L1 D cache: 32K [ 28.140507] CPU: L2 cache: 2048K [ 28.140513] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 [ 28.140532] Compat vDSO mapped to ffffe000. [ 28.140554] Checking 'hlt' instruction... OK. [ 28.156358] SMP alternatives: switching to UP code [ 28.156705] Freeing SMP alternatives: 11k freed [ 28.157214] Early unpacking initramfs... done [ 28.881642] ACPI: Core revision 20070126 [ 28.881724] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 28.886449] CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 [ 28.886489] Total of 1 processors activated (1598.18 BogoMIPS). [ 28.886686] ENABLING IO-APIC IRQs [ 28.886912] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 29.032187] Brought up 1 CPUs [ 29.032364] Booting paravirtualized kernel on bare hardware [ 29.032448] Time: 22:12:21 Date: 08/13/107 [ 29.032481] NET: Registered protocol family 16 [ 29.032604] EISA bus registered [ 29.032622] ACPI: bus type pci registered [ 29.070198] PCI: PCI BIOS revision 2.10 entry at 0xfbaae, last bus=4 [ 29.070203] PCI: Using configuration type 1 [ 29.070206] Setting up standard PCI resources [ 29.078000] ACPI: EC: Look up EC in DSDT [ 29.084855] ACPI: Interpreter enabled [ 29.084863] ACPI: (supports S0 S3 S4 S5) [ 29.084893] ACPI: Using IOAPIC for interrupt routing [ 29.103738] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 29.103766] PCI: Probing PCI hardware (bus 00) [ 29.104509] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 29.104517] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 29.105291] PCI: Transparent bridge - 0000:00:1e.0 [ 29.105419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 29.106301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 29.106468] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 29.117295] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 29.117486] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 29.117673] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11) [ 29.117858] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11) [ 29.118019] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 29.118186] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 29.118352] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 29.118526] Linux Plug and Play Support v0.97 (c) Adam Belay [ 29.118542] pnp: PnP ACPI init [ 29.118554] ACPI: bus type pnp registered [ 29.164120] pnp: PnP ACPI: found 11 devices [ 29.164131] ACPI: ACPI bus type pnp unregistered [ 29.164137] PnPBIOS: Disabled by ACPI PNP [ 29.164212] PCI: Using ACPI for IRQ routing [ 29.164217] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 29.181628] NET: Registered protocol family 8 [ 29.181633] NET: Registered protocol family 20 [ 29.181720] pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved [ 29.181728] pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 29.181734] pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 29.181740] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 29.181752] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 29.181758] pnp: 00:02: ioport range 0x1000-0x1005 has been reserved [ 29.181764] pnp: 00:02: ioport range 0x1008-0x100f has been reserved [ 29.181775] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved [ 29.181781] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved [ 29.181787] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved [ 29.181794] pnp: 00:03: ioport range 0x1060-0x107f has been reserved [ 29.181800] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved [ 29.181806] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved [ 29.181818] pnp: 00:08: ioport range 0x900-0x90f has been reserved [ 29.181824] pnp: 00:08: ioport range 0x910-0x91f has been reserved [ 29.181830] pnp: 00:08: ioport range 0x920-0x92f has been reserved [ 29.181836] pnp: 00:08: ioport range 0x930-0x93f has been reserved [ 29.181842] pnp: 00:08: ioport range 0x940-0x97f has been reserved [ 29.184126] Time: tsc clocksource has been installed. [ 29.212367] PCI: Bridge: 0000:00:01.0 [ 29.212372] IO window: d000-dfff [ 29.212379] MEM window: dfd00000-dfefffff [ 29.212385] PREFETCH window: d0000000-d7ffffff [ 29.212400] PCI: Bus 4, cardbus bridge: 0000:03:01.0 [ 29.212404] IO window: 00002000-000020ff [ 29.212411] IO window: 00002400-000024ff [ 29.212419] PREFETCH window: 60000000-63ffffff [ 29.212426] MEM window: 64000000-67ffffff [ 29.212433] PCI: Bridge: 0000:00:1e.0 [ 29.212438] IO window: 2000-2fff [ 29.212447] MEM window: dfc00000-dfcfffff [ 29.212454] PREFETCH window: 60000000-63ffffff [ 29.212476] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 29.212486] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 29.212502] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 29.212522] PCI: Enabling device 0000:03:01.0 (0000 -> 0003) [ 29.212531] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 17 [ 29.212556] NET: Registered protocol family 2 [ 29.252176] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 29.252279] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 29.254436] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 29.255195] TCP: Hash tables configured (established 131072 bind 65536) [ 29.255201] TCP reno registered [ 29.264370] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 [ 29.951390] it is [ 30.680266] Freeing initrd memory: 7105k freed [ 30.680438] Simple Boot Flag at 0x79 set to 0x1 [ 30.680821] audit: initializing netlink socket (disabled) [ 30.680841] audit(1189721542.020:1): initialized [ 30.680969] highmem bounce pool size: 64 pages [ 30.684520] VFS: Disk quotas dquot_6.5.1 [ 30.684611] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 30.684771] io scheduler noop registered [ 30.684775] io scheduler anticipatory registered [ 30.684780] io scheduler deadline registered [ 30.684810] io scheduler cfq registered (default) [ 30.684927] Boot video device is 0000:01:00.0 [ 30.685056] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 30.685100] assign_interrupt_mode Found MSI capability [ 30.685139] Allocate Port Service[0000:00:01.0:pcie00] [ 30.685423] isapnp: Scanning for PnP cards... [ 31.039781] isapnp: No Plug & Play device found [ 31.082268] Real Time Clock Driver v1.12ac [ 31.082434] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 31.083446] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 17 (level, low) -> IRQ 18 [ 31.083460] ACPI: PCI interrupt for device 0000:00:1e.3 disabled [ 31.084458] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 31.084796] input: Macintosh mouse button emulation as /class/input/input0 [ 31.084926] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 31.090413] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 31.090421] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 31.090687] mice: PS/2 mouse device common for all mice [ 31.090868] EISA: Probing bus 0 at eisa.0 [ 31.090880] Cannot allocate resource for EISA slot 1 [ 31.090885] Cannot allocate resource for EISA slot 2 [ 31.090919] EISA: Detected 0 cards. [ 31.091072] TCP cubic registered [ 31.091095] NET: Registered protocol family 1 [ 31.091132] Using IPI No-Shortcut mode [ 31.091397] Magic number: 7:497:249 [ 31.091427] hash matches device ttyw5 [ 31.091826] Freeing unused kernel memory: 364k freed [ 31.127920] input: AT Translated Set 2 keyboard as /class/input/input1 [ 32.478711] AppArmor: AppArmor initialized<5>audit(1189721544.020:2): info="AppArmor initialized" pid=1198 [ 32.489764] fuse init (API version 7.8) [ 32.497578] Failure registering capabilities with primary security module. [ 32.522146] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 32.522158] ACPI: Processor [CPU0] (supports 8 throttling states) [ 32.522180] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] [ 32.527284] ACPI: Thermal Zone [THM] (43 C) [ 33.299226] usbcore: registered new interface driver usbfs [ 33.299276] usbcore: registered new interface driver hub [ 33.299312] usbcore: registered new device driver usb [ 33.300821] USB Universal Host Controller Interface driver v3.0 [ 33.300898] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 33.300916] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 33.300923] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 33.301133] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 33.301173] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80 [ 33.301366] usb usb1: configuration #1 chosen from 1 choice [ 33.301413] hub 1-0:1.0: USB hub found [ 33.301424] hub 1-0:1.0: 2 ports detected [ 33.403800] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 18 [ 33.403819] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 33.403826] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 33.403873] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 33.403913] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000bf60 [ 33.404085] usb usb2: configuration #1 chosen from 1 choice [ 33.404133] hub 2-0:1.0: USB hub found [ 33.404144] hub 2-0:1.0: 2 ports detected [ 33.507795] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 33.507815] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 33.507822] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 33.507866] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 33.507907] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000bf40 [ 33.508074] usb usb3: configuration #1 chosen from 1 choice [ 33.508129] hub 3-0:1.0: USB hub found [ 33.508140] hub 3-0:1.0: 2 ports detected [ 33.570658] SCSI subsystem initialized [ 33.581127] libata version 2.21 loaded. [ 33.611713] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17 [ 33.611733] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 33.611740] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 33.611790] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 33.611833] uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000bf20 [ 33.612006] usb usb4: configuration #1 chosen from 1 choice [ 33.612054] hub 4-0:1.0: USB hub found [ 33.612066] hub 4-0:1.0: 2 ports detected [ 33.717018] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16 [ 33.717038] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 33.717045] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 33.717088] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 33.717137] ehci_hcd 0000:00:1d.7: debug port 1 [ 33.717147] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 33.717160] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800 [ 33.721051] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 33.721196] usb usb5: configuration #1 chosen from 1 choice [ 33.721245] hub 5-0:1.0: USB hub found [ 33.721256] hub 5-0:1.0: 8 ports detected [ 33.747554] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 33.828749] ahci 0000:00:1f.2: version 2.2 [ 33.828779] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 18 [ 33.828794] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 33.828801] ahci: probe of 0000:00:1f.2 failed with error -22 [ 33.833601] ata_piix 0000:00:1f.2: version 2.11 [ 33.833610] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 33.987532] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 18 [ 33.987587] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 33.987774] scsi0 : ata_piix [ 33.987852] scsi1 : ata_piix [ 33.988121] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14 [ 33.988129] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15 [ 34.152089] ata1.00: ATA-6: FUJITSU MHT2080AH, 006C, max UDMA/100 [ 34.152098] ata1.00: 156301488 sectors, multi 8: LBA [ 34.152103] ata1.00: applying bridge limits [ 5.988000] Marking TSC unstable due to: possible TSC halt in C2. [ 5.992000] Time: acpi_pm clocksource has been installed. [ 6.004000] ata1.00: configured for UDMA/100 [ 6.048000] Clocksource tsc unstable (delta = -199532085 ns) [ 6.140000] usb 2-1: new full speed USB device using uhci_hcd and address 3 [ 6.324000] ata2.00: ATAPI: _NEC DVD+/-RW ND-6650A, 102C, max UDMA/33 [ 6.336000] usb 2-1: configuration #1 chosen from 1 choice [ 6.496000] ata2.00: configured for UDMA/33 [ 6.496000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2080A 006C PQ: 0 ANSI: 5 [ 6.496000] scsi 1:0:0:0: CD-ROM _NEC DVD+-RW ND-6650A 102C PQ: 0 ANSI: 5 [ 6.496000] b44.c:v1.01 (Jun 16, 2006) [ 6.496000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 19 [ 6.500000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:12:3f:dc:2b:28 [ 6.500000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 19 [ 6.552000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dfcfc800-dfcfcfff] Max Packet=[2048] IR/IT contexts=[4/4] [ 6.588000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 6.592000] sd 0:0:0:0: [sda] Write Protect is off [ 6.592000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.592000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.592000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 6.592000] sd 0:0:0:0: [sda] Write Protect is off [ 6.592000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.592000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.592000] sda: sda1 sda2 sda3 < sda5 > [ 6.696000] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.704000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.704000] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 6.724000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 6.724000] Uniform CD-ROM driver Revision: 3.20 [ 6.724000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 7.052000] Attempting manual resume [ 7.052000] swsusp: Resume From Partition 8:5 [ 7.052000] PM: Checking swsusp image. [ 7.052000] PM: Resume from disk failed. [ 7.116000] kjournald starting. Commit interval 5 seconds [ 7.116000] EXT3-fs: mounted filesystem with ordered data mode. [ 7.832000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[484fc0002798dc30] [ 20.960000] Linux agpgart interface v0.102 (c) Dave Jones [ 21.036000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 21.148000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.152000] NET: Registered protocol family 17 [ 21.680000] Yenta: CardBus bridge found at 0000:03:01.0 [1028:0189] [ 21.700000] sdhci: Secure Digital Host Controller Interface driver [ 21.700000] sdhci: Copyright(c) Pierre Ossman [ 21.772000] intel_rng: FWH not detected [ 21.808000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 17 [ 21.808000] Socket status: 30000006 [ 21.808000] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 21.808000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 21.808000] cs: IO port probe 0x2000-0x2fff: clean. [ 21.808000] pcmcia: parent PCI bridge Memory window: 0xdfc00000 - 0xdfcfffff [ 21.808000] pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff [ 21.816000] sdhci: SDHCI controller found at 0000:03:01.2 [1180:0822] (rev 17) [ 21.816000] ACPI: PCI Interrupt 0000:03:01.2[C] -> GSI 17 (level, low) -> IRQ 18 [ 21.816000] mmc0: SDHCI at 0xdfcfc700 irq 18 DMA [ 21.832000] iTCO_vendor_support: vendor-support=0 [ 21.832000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 21.832000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) [ 21.832000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 22.388000] ieee80211_crypt: registered algorithm 'NULL' [ 22.392000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 22.392000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 22.416000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq [ 22.416000] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 22.416000] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 17 (level, low) -> IRQ 18 [ 22.416000] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection [ 23.392000] Bluetooth: Core ver 2.11 [ 23.396000] NET: Registered protocol family 31 [ 23.396000] Bluetooth: HCI device and connection manager initialized [ 23.396000] Bluetooth: HCI socket layer initialized [ 24.028000] input: PS/2 Mouse as /class/input/input2 [ 24.048000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 [ 24.392000] Bluetooth: HCI USB driver ver 2.9 [ 24.492000] usbcore: registered new interface driver hci_usb [ 24.616000] input: PC Speaker as /class/input/input4 [ 24.988000] ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels) [ 24.988000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16 [ 24.988000] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [ 25.056000] cs: IO port probe 0x100-0x3af: clean. [ 25.060000] cs: IO port probe 0x3e0-0x4ff: clean. [ 25.060000] cs: IO port probe 0x820-0x8ff: clean. [ 25.060000] cs: IO port probe 0xc00-0xcf7: clean. [ 25.060000] cs: IO port probe 0xa00-0xaff: clean. [ 25.816000] intel8x0_measure_ac97_clock: measured 55401 usecs [ 25.816000] intel8x0: clocking to 48000 [ 27.088000] lp: driver loaded but no devices found [ 27.216000] Adding 2875592k swap on /dev/sda5. Priority:-1 extents:1 across:2875592k [ 27.628000] EXT3 FS on sda2, internal journal [ 28.516000] NET: Registered protocol family 10 [ 28.520000] lo: Disabled Privacy Extensions [ 28.520000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 29.008000] audit(1189714370.124:3): operation="profile_load" info="failed to unpack profile" name="/bin/ping" pid=4101 [ 29.044000] audit(1189714370.124:4): operation="profile_load" info="failed to unpack profile" name="/sbin/klogd" pid=4105 [ 29.096000] audit(1189714370.124:5): operation="profile_load" info="failed to unpack profile" name="/sbin/syslog-ng" pid=4107 [ 29.164000] audit(1189714370.124:6): operation="profile_load" info="failed to unpack profile" name="/sbin/syslogd" pid=4109 [ 29.244000] audit(1189714361.558:7): operation="profile_load" info="failed to unpack profile" name="/usr/sbin/identd" pid=4114 [ 29.292000] audit(1189714361.558:8): operation="profile_load" info="failed to unpack profile" name="/usr/sbin/mdnsd" pid=4116 [ 29.356000] audit(1189714361.558:9): operation="profile_load" info="failed to unpack profile" name="/usr/sbin/mysqld" pid=4118 [ 29.408000] audit(1189714361.558:10): operation="profile_load" info="failed to unpack profile" name="/usr/sbin/named" pid=4120 [ 29.464000] audit(1189714361.558:11): operation="profile_load" info="failed to unpack profile" name="/usr/sbin/nmbd" pid=4122 [ 29.516000] audit(1189714362.058:12): operation="profile_load" info="failed to unpack profile" name="/usr/sbin/nscd" pid=4124 [ 29.588000] audit(1189714362.058:13): operation="profile_load" info="failed to unpack profile" name="/usr/sbin/ntpd" pid=4126 [ 29.668000] audit(1189714362.058:14): operation="profile_load" info="failed to unpack profile" name="/usr/sbin/smbd" pid=4128 [ 29.720000] audit(1189714362.058:15): operation="profile_load" info="failed to unpack profile" name="/usr/sbin/traceroute" pid=4130