[ 0.000000] Linux version 2.6.22-8-generic (buildd@palmer) (gcc version 4.1.3 20070629 (prerelease) (Ubuntu 4.1.2-13ubuntu2)) #1 SMP Thu Jul 12 15:59:45 GMT 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 1151MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f4e00 [ 0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524272 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524272 [ 0.000000 ] On node 0 totalpages: 524272 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2303 pages used for memmap [ 0.000000] HighMem zone: 292593 pages, LIFO batch:31 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F6750, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT 7FFF3040, 0038 (r1 GBT AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: FACP 7FFF30C0, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: DSDT 7FFF3180, 3828 (r1 GBT AWRDACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 7FFF0000, 0040 [ 0.000000] ACPI: MCFG 7FFF6AC0, 003C (r1 GBT AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: APIC 7FFF6A00, 0068 (r1 GBT AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: SSDT 7FFF6B40, 015C (r1 PmRef Cpu0Ist 3000 INTL 20040311) [ 0.000000] ACPI: SSDT 7FFF6FD0, 0167 (r1 PmRef CpuPm 3000 INTL 20040311) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] Built 1 zonelists. Total pages: 520177 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper xforcevesa initrd=/casper/initrd.gz quiet splash -- [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1862.110 MHz processor. [ 1165.749289] Console: colour VGA+ 80x25 [ 1165.749494 ] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 1165.749744] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 1165.832533] Memory: 2067720k/2097088k available (2009k kernel code, 28120k reserved, 918k data, 364k init, 1179584k highmem) [ 1165.832541] virtual kernel memory layout: [ 1165.832542] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 1165.832543] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 1165.832544] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 1165.832545] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 1165.832546] .init : 0xc03e1000 - 0xc043c000 ( 364 kB) [ 1165.832547] .data : 0xc02f6606 - 0xc03dbe64 ( 918 kB) [ 1165.832548 ] .text : 0xc0100000 - 0xc02f6606 (2009 kB) [ 1165.832551] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 1165.832586] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 1165.912475] Calibrating delay using timer specific routine.. 3727.09 BogoMIPS (lpj=7454190) [ 1165.912497] Security Framework v1.0.0 initialized [ 1165.912503] SELinux: Disabled at boot. [ 1165.912515] Mount-cache hash table entries: 512 [ 1165.912627] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 1165.912635] monitor/mwait feature present. [ 1165.912637] using mwait in idle threads. [ 1165.912641 ] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1165.912643] CPU: L2 cache: 4096K [ 1165.912646] CPU: Physical Processor ID: 0 [ 1165.912647] CPU: Processor Core ID: 0 [ 1165.912649] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 1165.912658] Compat vDSO mapped to ffffe000. [ 1165.912669] Checking 'hlt' instruction... OK. [ 1165.928550] SMP alternatives: switching to UP code [ 1165.928861] ACPI: Core revision 20070126 [ 1165.930900 ] CPU0: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz stepping 06 [ 1165.930916] SMP alternatives: switching to SMP code [ 1165.930932] Booting processor 1/1 eip 3000 [ 1165.941922] Initializing CPU#1 [ 1166.020293 ] Calibrating delay using timer specific routine.. 3724.28 BogoMIPS (lpj=7448563) [ 1166.020298] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 1166.020303] monitor/mwait feature present. [ 1166.020305] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1166.020307] CPU: L2 cache: 4096K [ 1166.020309] CPU: Physical Processor ID: 0 [ 1166.020310] CPU: Processor Core ID: 1 [ 1166.020311] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 1166.021013] CPU1: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz stepping 06 [ 1166.021031] Total of 2 processors activated (7451.37 BogoMIPS). [ 1166.021173] ENABLING IO-APIC IRQs [ 1166.021341] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1166.168134] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 1166.188114] Brought up 2 CPUs [ 1166.495515] migration_cost=40 [ 1166.495630] Booting paravirtualized kernel on bare hardware [ 1166.495688 ] Time: 3:16:44 Date: 07/11/107 [ 1166.495705] NET: Registered protocol family 16 [ 1166.495773] EISA bus registered [ 1166.495776] ACPI: bus type pci registered [ 1166.495783] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support. [ 1166.501744] PCI: PCI BIOS revision 3.00 entry at 0xfaba0, last bus=4 [ 1166.501745] PCI: Using configuration type 1 [ 1166.501747] Setting up standard PCI resources [ 1166.507366] ACPI: EC: Look up EC in DSDT [ 1166.510701] ACPI: Interpreter enabled [ 1166.510704] ACPI: (supports S0 S1 S4 S5) [ 1166.510717] ACPI: Using IOAPIC for interrupt routing [ 1166.515028] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1166.515033 ] PCI: Probing PCI hardware (bus 00) [ 1166.515500] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 1166.515504] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 1166.516005] PCI: Transparent bridge - 0000:00: 1e.0 [ 1166.516053] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1166.516168] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 1166.516227] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 1166.516290] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 1166.523635] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 1166.523717] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 1166.523797] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 9 10 11 12 14 15) [ 1166.523876] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 1166.523955] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 1166.524035] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 1166.524115] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 1166.524195] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 1166.524280] Linux Plug and Play Support v0.97 (c) Adam Belay [ 1166.524288] pnp: PnP ACPI init [ 1166.524295] ACPI: bus type pnp registered [ 1166.526569] pnp: PnP ACPI: found 14 devices [ 1166.526571] ACPI: ACPI bus type pnp unregistered [ 1166.526576] PnPBIOS: Disabled by ACPI PNP [ 1166.526612] PCI: Using ACPI for IRQ routing [ 1166.526614] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 1166.548178 ] NET: Registered protocol family 8 [ 1166.548179] NET: Registered protocol family 20 [ 1166.548226] pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved [ 1166.548232] pnp: 00:0b: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 1166.548236] pnp: 00:0c: iomem range 0xd0000-0xd7fff has been reserved [ 1166.548239] pnp: 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 1166.548241] pnp: 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 1166.548244] pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 1166.551428] Time: tsc clocksource has been installed. [ 1166.578448] PCI: Bridge: 0000:00:01.0 [ 1166.578451] IO window: 9000-9fff [ 1166.578454] MEM window: e0000000-e3ffffff [ 1166.578457] PREFETCH window: d0000000-dfffffff [ 1166.578460] PCI: Bridge: 0000:00:1c.0 [ 1166.578463] IO window: 8000-8fff [ 1166.578466] MEM window: disabled. [ 1166.578469] PREFETCH window: disabled. [ 1166.578474] PCI: Bridge: 0000:00:1c.1 [ 1166.578476] IO window: a000-afff [ 1166.578481] MEM window: e4000000-e5ffffff [ 1166.578484] PREFETCH window: 88000000-880fffff [ 1166.578488] PCI: Bridge: 0000:00:1e.0 [ 1166.578491] IO window: 7000-7fff [ 1166.578494] MEM window: disabled. [ 1166.578497] PREFETCH window: disabled. [ 1166.578509] ACPI: PCI Interrupt 0000:00: 01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1166.578514] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 1166.578529] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1166.578534 ] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1166.578550] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 1166.578554] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 1166.578564] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 1166.578573] NET: Registered protocol family 2 [ 1166.615534] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1166.615575 ] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 1166.616172] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1166.616366] TCP: Hash tables configured (established 131072 bind 65536) [ 1166.616368] TCP reno registered [ 1166.627680] checking if image is initramfs... it is [ 1167.074915] Switched to high resolution mode on CPU 1 [ 1167.078816] Switched to high resolution mode on CPU 0 [ 1167.197510] Freeing initrd memory: 7007k freed [ 1167.198024] audit: initializing netlink socket (disabled) [ 1167.198039] audit(1186802205.100:1): initialized [ 1167.198125] highmem bounce pool size: 64 pages [ 1167.199852] VFS: Disk quotas dquot_6.5.1 [ 1167.199893] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1167.199970] io scheduler noop registered [ 1167.199972] io scheduler anticipatory registered [ 1167.199974] io scheduler deadline registered [ 1167.199985] io scheduler cfq registered (default) [ 1167.200063] Boot video device is 0000:01:00.0 [ 1167.200132] PCI: Setting latency timer of device 0000:00: 01.0 to 64 [ 1167.200163] assign_interrupt_mode Found MSI capability [ 1167.200190] Allocate Port Service[0000:00:01.0:pcie00] [ 1167.200259] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1167.200296 ] assign_interrupt_mode Found MSI capability [ 1167.200326] Allocate Port Service[0000:00:1c.0:pcie00] [ 1167.200354] Allocate Port Service[0000:00:1c.0:pcie02] [ 1167.200425] PCI: Setting latency timer of device 0000:00: 1c.1 to 64 [ 1167.200461] assign_interrupt_mode Found MSI capability [ 1167.200491] Allocate Port Service[0000:00:1c.1:pcie00] [ 1167.200519] Allocate Port Service[0000:00:1c.1:pcie02] [ 1167.200683] isapnp: Scanning for PnP cards... [ 1167.553085] isapnp: No Plug & Play device found [ 1167.571835] Real Time Clock Driver v1.12ac [ 1167.571930] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1167.572401] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1167.572574] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1167.573177] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1167.573285] input: Macintosh mouse button emulation as /class/input/input0 [ 1167.573355] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1167.573357] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 1167.573642] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1167.573647 ] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1167.573774] mice: PS/2 mouse device common for all mice [ 1167.573874] EISA: Probing bus 0 at eisa.0 [ 1167.573898] Cannot allocate resource for EISA slot 7 [ 1167.573900 ] Cannot allocate resource for EISA slot 8 [ 1167.573902] EISA: Detected 0 cards. [ 1167.573974] TCP cubic registered [ 1167.573985] NET: Registered protocol family 1 [ 1167.574004] Using IPI No-Shortcut mode [ 1167.574149] Magic number: 3:871:259 [ 1167.574158] hash matches device ttyx1 [ 1167.574197] hash matches device 0000:00:1d.7 [ 1167.574345] Freeing unused kernel memory: 364k freed [ 1167.597027] input: AT Translated Set 2 keyboard as /class/input/input1 [ 1168.748071] Capability LSM initialized [ 1168.755902] ACPI: Processor [CPU0] (supports 2 throttling states) [ 1168.756005] ACPI: SSDT 7FFF6F40, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311) [ 1168.756094 ] ACPI: Processor [CPU1] (supports 2 throttling states) [ 1169.131900] usbcore: registered new interface driver usbfs [ 1169.131919] usbcore: registered new interface driver hub [ 1169.131937] usbcore: registered new device driver usb [ 1169.132556] USB Universal Host Controller Interface driver v3.0 [ 1169.132610] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18 [ 1169.132619] PCI: Setting latency timer of device 0000:00: 1d.0 to 64 [ 1169.132623] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1169.132731] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1169.132756] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000b000 [ 1169.132844] usb usb1: configuration #1 chosen from 1 choice [ 1169.132865] hub 1-0:1.0: USB hub found [ 1169.132869] hub 1-0:1.0: 2 ports detected [ 1169.191238] SCSI subsystem initialized [ 1169.195491 ] libata version 2.21 loaded. [ 1169.235150] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 1169.235159] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 1169.235163] uhci_hcd 0000:00: 1d.1: UHCI Host Controller [ 1169.235269] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 1169.235294] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 [ 1169.235555] usb usb2: configuration #1 chosen from 1 choice [ 1169.235669] hub 2-0:1.0: USB hub found [ 1169.235674] hub 2-0:1.0: 2 ports detected [ 1169.339008] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 [ 1169.339015] PCI: Setting latency timer of device 0000:00: 1d.2 to 64 [ 1169.339018] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1169.339128] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 1169.339152] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000b800 [ 1169.339429] usb usb3: configuration #1 chosen from 1 choice [ 1169.339549] hub 3-0:1.0: USB hub found [ 1169.339554] hub 3-0:1.0: 2 ports detected [ 1169.442856] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 1169.442862] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 1169.442865] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1169.442988] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 1169.443011] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00 [ 1169.443314] usb usb4: configuration #1 chosen from 1 choice [ 1169.443447] hub 4-0:1.0: USB hub found [ 1169.443453] hub 4-0:1.0: 2 ports detected [ 1169.549137] ata_piix 0000:00:1f.1: version 2.11 [ 1169.549147] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20 [ 1169.549170] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 1169.549225] scsi0 : ata_piix [ 1169.549257] scsi1 : ata_piix [ 1169.549277] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14 [ 1169.549280] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15 [ 1169.682077] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 1169.844375] usb 3-1: configuration #1 chosen from 1 choice [ 1169.848324] hub 3-1:1.0: USB hub found [ 1169.851297] hub 3-1:1.0 : 4 ports detected [ 1169.866054] ata1.00: ATAPI: PIONEER DVD-RW DVR-108, 1.18, max UDMA/66 [ 1170.037695] ata1.00: configured for UDMA/66 [ 1170.203903] usb 3-2: new low speed USB device using uhci_hcd and address 3 [ 1170.210175] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-108 1.18 PQ: 0 ANSI: 5 [ 1170.210228] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1170.210250] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 1170.210276] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 1170.210305] scsi2 : ata_piix [ 1170.210339] scsi3 : ata_piix [ 1170.210363] ata3: SATA max UDMA/133 cmd 0x0001d000 ctl 0x0001d402 bmdma 0x0001e000 irq 19 [ 1170.210366] ata4: SATA max UDMA/133 cmd 0x0001d800 ctl 0x0001dc02 bmdma 0x0001e008 irq 19 [ 1170.394422] usb 3-2: configuration #1 chosen from 1 choice [ 1170.539323] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18 [ 1170.539331] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 1170.539335] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1170.539358] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 1170.539383] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 1170.539388] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xe6004000 [ 1170.543261] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1170.543330] usb usb5: configuration #1 chosen from 1 choice [ 1170.543351] hub 5-0:1.0: USB hub found [ 1170.543356] hub 5-0:1.0: 8 ports detected [ 1170.552871] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1170.552874] Uniform CD-ROM driver Revision: 3.20 [ 1170.552912] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1170.556561] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1170.644571] r8169 Gigabit Ethernet driver 2.2LK loaded [ 1170.644593] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 1170.644616] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 1170.644797] eth0: RTL8168b/8111b at 0xf883c000, 00:16:e6:6b:a2:da, IRQ 17 [ 1170.709820] hub 3-1:1.0: hub_port_status failed (err = -71) [ 1170.710816] hub 3-1:1.0: hub_port_status failed (err = -71) [ 1170.711814] hub 3-1:1.0: hub_port_status failed (err = -71) [ 1170.712813] hub 3-1: 1.0: hub_port_status failed (err = -71) [ 1170.951873] usb 5-5: new high speed USB device using ehci_hcd and address 2 [ 1171.084929] usb 5-5: configuration #1 chosen from 1 choice [ 1171.085254] hub 5-5:1.0: USB hub found [ 1171.085484] hub 5-5:1.0: 4 ports detected [ 1171.794459] usb 3-1: USB disconnect, address 2 [ 1171.794476] usbcore: registered new interface driver hiddev [ 1171.922212] usb 3-2: USB disconnect, address 3 [ 1172.063567] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 1172.099908] ISO 9660 Extensions: RRIP_1991A [ 1172.130345] Registering unionfs 1.4 [ 1172.130347] unionfs: debugging is not enabled [ 1172.138316 ] loop: module loaded [ 1172.161790] usb 3-2: new low speed USB device using uhci_hcd and address 4 [ 1172.341074] usb 3-2: configuration #1 chosen from 1 choice [ 1172.545345] usb 5-5.4: new high speed USB device using ehci_hcd and address 6 [ 1172.639240] usb 5-5.4: configuration #1 chosen from 1 choice [ 1172.653663] input: Logitech Logitech USB Keyboard as /class/input/input2 [ 1172.653672] input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00: 1d.2-2 [ 1172.693467] input: Logitech Logitech USB Keyboard as /class/input/input3 [ 1172.693487] input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:1d.2-2 [ 1172.693498] usbcore: registered new interface driver usbhid [ 1172.693501] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 1172.876576] usb 4-1: new low speed USB device using uhci_hcd and address 3 [ 1173.052885] usb 4-1: configuration #1 chosen from 1 choice [ 1173.068408] input: Logitech USB-PS/2 Optical Mouse as /class/input/input4 [ 1173.068426] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.3-1 [ 1173.307838] usb 4-2: new full speed USB device using uhci_hcd and address 4 [ 1173.481142] usb 4-2: configuration #1 chosen from 1 choice [ 1173.484628] usbcore: registered new interface driver libusual [ 1173.489356] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 1173.489360 ] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1173.490722] Initializing USB Mass Storage driver... [ 1173.490763] scsi4 : SCSI emulation for USB Mass Storage devices [ 1173.490798 ] usb-storage: device found at 6 [ 1173.490799] usb-storage: waiting for device to settle before scanning [ 1173.490830] scsi5 : SCSI emulation for USB Mass Storage devices [ 1173.490858] usb-storage: device found at 4 [ 1173.490859] usb-storage: waiting for device to settle before scanning [ 1173.490868] usbcore: registered new interface driver usb-storage [ 1173.490870] USB Mass Storage support registered. [ 1173.590689] squashfs: version 3.2-UBUNTU (2007/04/10) Phillip Lougher [ 1178.479012] usb-storage: device scan complete [ 1178.479506] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 1178.480009] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 1178.480509] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 1178.481018] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 1178.481267 ] scsi 4:0:0:0: Attached scsi generic sg1 type 0 [ 1178.481322] scsi 4:0:0:1: Attached scsi generic sg2 type 0 [ 1178.481375] scsi 4:0:0:2: Attached scsi generic sg3 type 0 [ 1178.481422] scsi 4:0:0:3: Attached scsi generic sg4 type 0 [ 1178.481470] usb-storage: device scan complete [ 1178.488879] sd 4:0:0:0: [sda] Attached SCSI removable disk [ 1178.489755] sd 4:0:0:1: [sdb] Attached SCSI removable disk [ 1178.490636] sd 4:0:0:2: [sdc] Attached SCSI removable disk [ 1178.491510] sd 4:0:0:3: [sdd] Attached SCSI removable disk [ 1178.494456] scsi 5:0:0:0: Direct-Access Brother DCP-115C 1.00 PQ: 0 ANSI: 2 [ 1178.534412] sd 5:0:0:0: [sde] Attached SCSI removable disk [ 1178.534448] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 1224.584354] r8169: eth0: link up [ 1224.584359] r8169: eth0: link up [ 1225.467953] Linux agpgart interface v0.102 (c) Dave Jones [ 1225.520020 ] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1225.814315] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1225.921495] iTCO_vendor_support: vendor-support=0 [ 1225.948229] input: PC Speaker as /class/input/input5 [ 1226.173669] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 1226.173738] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 1226.173775] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 1226.180531] parport_pc 00:08: reported by Plug and Play ACPI [ 1226.180575] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 1226.201721] intel_rng: FWH not detected [ 1226.376480] /build/buildd/linux- source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x018C [ 1226.376496] usbcore: registered new interface driver usblp [ 1226.376498] /build/buildd/linux- source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 1226.612869] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1226.612884] PCI: Setting latency timer of device 0000:00: 1b.0 to 64 [ 1226.717217] NET: Registered protocol family 17 [ 1227.536360] fuse init (API version 7.8) [ 1229.559549] NET: Registered protocol family 10 [ 1229.559621] lo: Disabled Privacy Extensions [ 1234.539175 ] No dock devices found. [ 1234.580551] input: Power Button (FF) as /class/input/input6 [ 1234.580566] ACPI: Power Button (FF) [PWRF] [ 1234.580602] input: Power Button (CM) as /class/input/input7 [ 1234.580614 ] ACPI: Power Button (CM) [PWRB] [ 1234.679809] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 1239.965045] eth0: no IPv6 routers present [ 1242.705872] lp0: using parport0 (interrupt-driven). [ 1242.996387 ] ppdev: user-space parallel port driver [ 1251.801495] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 1251.801499] apm: disabled - APM is not SMP safe. [ 1261.276293] Bluetooth: Core ver 2.11 [ 1261.276425 ] NET: Registered protocol family 31 [ 1261.276428] Bluetooth: HCI device and connection manager initialized [ 1261.276431] Bluetooth: HCI socket layer initialized [ 1261.864408] Bluetooth: L2CAP ver 2.8 [ 1261.864411 ] Bluetooth: L2CAP socket layer initialized [ 1262.658259] Bluetooth: RFCOMM socket layer initialized [ 1262.658272] Bluetooth: RFCOMM TTY layer initialized [ 1262.658274] Bluetooth: RFCOMM ver 1.8 [ 1332.766177 ] usb 5-5.3: new high speed USB device using ehci_hcd and address 7 [ 1332.906025] usb 5-5.3: configuration #2 chosen from 1 choice [ 1332.906744] scsi6 : SCSI emulation for USB Mass Storage devices [ 1332.906795 ] usb-storage: device found at 7 [ 1332.906797] usb-storage: waiting for device to settle before scanning [ 1337.897230] usb-storage: device scan complete [ 1337.898105] scsi 6:0:0:0: Direct-Access TOSHIBA MK3006GAL BY10 PQ: 0 ANSI: 0 CCS [ 1337.899459] sd 6:0:0:0: [sdf] 58605120 512-byte hardware sectors (30006 MB) [ 1337.900331] sd 6:0:0:0: [sdf] Write Protect is off [ 1337.900335] sd 6:0:0:0: [sdf] Mode Sense: 00 4a 00 00 [ 1337.900337] sd 6:0:0:0: [sdf] Assuming drive cache: write through [ 1337.901205] sd 6:0:0:0: [sdf] 58605120 512-byte hardware sectors (30006 MB) [ 1337.902078] sd 6:0:0:0: [sdf] Write Protect is off [ 1337.902082] sd 6:0:0:0: [sdf] Mode Sense: 00 4a 00 00 [ 1337.902084] sd 6:0:0:0: [sdf] Assuming drive cache: write through [ 1337.902087] sdf: sdf1 [ 1338.244424] sd 6:0:0:0: [sdf] Attached SCSI disk [ 1338.244466] sd 6:0:0:0: Attached scsi generic sg6 type 0 [ 1339.523159] sd 4:0:0:0: [sda] 4022272 512-byte hardware sectors (2059 MB) [ 1339.524283] sd 4:0:0:0: [sda] Write Protect is off [ 1339.524287] sd 4:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 1339.524290] sd 4:0:0:0: [sda] Assuming drive cache: write through [ 1339.526283] sd 4:0:0:0: [sda] 4022272 512-byte hardware sectors (2059 MB) [ 1339.527277] sd 4:0:0:0: [sda] Write Protect is off [ 1339.527280] sd 4:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 1339.527282] sd 4:0:0:0: [sda] Assuming drive cache: write through [ 1339.527285] sda: sda1 [ 1391.433808] sd 4:0:0:0: [sda] 4022272 512-byte hardware sectors (2059 MB) [ 1391.434931] sd 4:0:0:0: [sda] Write Protect is off [ 1391.434935] sd 4:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 1391.434938] sd 4:0:0:0: [sda] Assuming drive cache: write through [ 1391.436053] sd 4:0:0:0: [sda] 4022272 512-byte hardware sectors (2059 MB) [ 1391.437052] sd 4:0:0:0: [sda] Write Protect is off [ 1391.437055] sd 4:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 1391.437058] sd 4:0:0:0: [sda] Assuming drive cache: write through [ 1391.437061] sda: sda1 [ 2339.818106] sd 4:0:0:0: [sda] 4022272 512-byte hardware sectors (2059 MB) [ 2339.818980] sd 4:0:0:0: [sda] Write Protect is off [ 2339.818984] sd 4:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 2339.818988] sd 4:0:0:0: [sda] Assuming drive cache: write through [ 2339.819851] sd 4:0:0:0: [sda] 4022272 512-byte hardware sectors (2059 MB) [ 2339.820726] sd 4:0:0:0: [sda] Write Protect is off [ 2339.820730 ] sd 4:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 2339.820732] sd 4:0:0:0: [sda] Assuming drive cache: write through [ 2339.820735] sda: sda1